linux-pci.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Rob Herring <robh@kernel.org>
To: Chuanjia Liu <chuanjia.liu@mediatek.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>,
	Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>,
	Matthias Brugger <matthias.bgg@gmail.com>,
	linux-pci@vger.kernel.org, linux-mediatek@lists.infradead.org,
	devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	yong.wu@mediatek.com, Frank Wunderlich <frank-w@public-files.de>,
	Ryder Lee <ryder.lee@mediatek.com>
Subject: Re: [PATCH v6 2/4] PCI: mediatek: Add new method to get shared pcie-cfg base and irq
Date: Wed, 30 Sep 2020 10:23:17 -0500	[thread overview]
Message-ID: <20200930152317.GA2891120@bogus> (raw)
In-Reply-To: <20200914112659.7091-3-chuanjia.liu@mediatek.com>

On Mon, Sep 14, 2020 at 07:26:57PM +0800, Chuanjia Liu wrote:
> Add new method to get shared pcie-cfg base and pcie irq for
> new dts format.
> 
> Signed-off-by: Chuanjia Liu <chuanjia.liu@mediatek.com>
> Acked-by: Ryder Lee <ryder.lee@mediatek.com>
> ---
>  drivers/pci/controller/pcie-mediatek.c | 23 ++++++++++++++++++++++-
>  1 file changed, 22 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/pci/controller/pcie-mediatek.c b/drivers/pci/controller/pcie-mediatek.c
> index cf4c18f0c25a..5b915eb0cf1e 100644
> --- a/drivers/pci/controller/pcie-mediatek.c
> +++ b/drivers/pci/controller/pcie-mediatek.c
> @@ -14,6 +14,7 @@
>  #include <linux/irqchip/chained_irq.h>
>  #include <linux/irqdomain.h>
>  #include <linux/kernel.h>
> +#include <linux/mfd/syscon.h>
>  #include <linux/msi.h>
>  #include <linux/module.h>
>  #include <linux/of_address.h>
> @@ -23,6 +24,7 @@
>  #include <linux/phy/phy.h>
>  #include <linux/platform_device.h>
>  #include <linux/pm_runtime.h>
> +#include <linux/regmap.h>
>  #include <linux/reset.h>
>  
>  #include "../pci.h"
> @@ -205,6 +207,7 @@ struct mtk_pcie_port {
>   * struct mtk_pcie - PCIe host information
>   * @dev: pointer to PCIe device
>   * @base: IO mapped register base
> + * @cfg: IO mapped register map for PCIe config
>   * @free_ck: free-run reference clock
>   * @mem: non-prefetchable memory resource
>   * @ports: pointer to PCIe port information
> @@ -213,6 +216,7 @@ struct mtk_pcie_port {
>  struct mtk_pcie {
>  	struct device *dev;
>  	void __iomem *base;
> +	struct regmap *cfg;
>  	struct clk *free_ck;
>  
>  	struct list_head ports;
> @@ -648,7 +652,11 @@ static int mtk_pcie_setup_irq(struct mtk_pcie_port *port,
>  		return err;
>  	}
>  
> -	port->irq = platform_get_irq(pdev, port->slot);
> +	if (of_find_property(dev->of_node, "interrupt-names", NULL))
> +		port->irq = platform_get_irq_byname(pdev, "pcie_irq");

Not really any point in having a name with a single interrupt.

> +	else
> +		port->irq = platform_get_irq(pdev, port->slot);

With the new binding, slot is always 0, right? Then you don't need any 
change here.

> +
>  	if (port->irq < 0)
>  		return port->irq;
>  
> @@ -680,6 +688,10 @@ static int mtk_pcie_startup_port_v2(struct mtk_pcie_port *port)
>  		val |= PCIE_CSR_LTSSM_EN(port->slot) |
>  		       PCIE_CSR_ASPM_L1_EN(port->slot);
>  		writel(val, pcie->base + PCIE_SYS_CFG_V2);
> +	} else if (pcie->cfg) {
> +		val = PCIE_CSR_LTSSM_EN(port->slot) |
> +		      PCIE_CSR_ASPM_L1_EN(port->slot);
> +		regmap_update_bits(pcie->cfg, PCIE_SYS_CFG_V2, val, val);
>  	}
>  
>  	/* Assert all reset signals */
> @@ -983,6 +995,7 @@ static int mtk_pcie_subsys_powerup(struct mtk_pcie *pcie)
>  	struct device *dev = pcie->dev;
>  	struct platform_device *pdev = to_platform_device(dev);
>  	struct resource *regs;
> +	struct device_node *cfg_node;
>  	int err;
>  
>  	/* get shared registers, which are optional */
> @@ -995,6 +1008,14 @@ static int mtk_pcie_subsys_powerup(struct mtk_pcie *pcie)
>  		}
>  	}
>  
> +	cfg_node = of_find_compatible_node(NULL, NULL,
> +					   "mediatek,generic-pciecfg");
> +	if (cfg_node) {
> +		pcie->cfg = syscon_node_to_regmap(cfg_node);
> +		if (IS_ERR(pcie->cfg))
> +			return PTR_ERR(pcie->cfg);
> +	}
> +
>  	pcie->free_ck = devm_clk_get(dev, "free_ck");
>  	if (IS_ERR(pcie->free_ck)) {
>  		if (PTR_ERR(pcie->free_ck) == -EPROBE_DEFER)
> -- 
> 2.18.0

  reply	other threads:[~2020-09-30 15:23 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-09-14 11:26 [PATCH v6 0/4] Spilt PCIe node to comply with hardware design Chuanjia Liu
2020-09-14 11:26 ` [PATCH v6 1/4] dt-bindings: pci: mediatek: Modified the Device tree bindings Chuanjia Liu
2020-09-22 23:31   ` Rob Herring
2020-09-28  3:18     ` Chuanjia Liu
2020-09-14 11:26 ` [PATCH v6 2/4] PCI: mediatek: Add new method to get shared pcie-cfg base and irq Chuanjia Liu
2020-09-30 15:23   ` Rob Herring [this message]
2020-10-09 12:53     ` Chuanjia Liu
2020-09-14 11:26 ` [PATCH v6 3/4] arm64: dts: mediatek: Split PCIe node for MT2712 and MT7622 Chuanjia Liu
2020-09-14 11:26 ` [PATCH v6 4/4] ARM: dts: mediatek: Modified MT7629 PCIe node Chuanjia Liu
2020-09-14 11:39 ` Aw: [PATCH v6 0/4] Spilt PCIe node to comply with hardware design Frank Wunderlich
2020-09-28  3:25   ` Chuanjia Liu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200930152317.GA2891120@bogus \
    --to=robh@kernel.org \
    --cc=bhelgaas@google.com \
    --cc=chuanjia.liu@mediatek.com \
    --cc=devicetree@vger.kernel.org \
    --cc=frank-w@public-files.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=lorenzo.pieralisi@arm.com \
    --cc=matthias.bgg@gmail.com \
    --cc=ryder.lee@mediatek.com \
    --cc=yong.wu@mediatek.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).