Linux-PCI Archive on lore.kernel.org
 help / color / Atom feed
From: Sean V Kelley <seanvk.dev@oregontracks.org>
To: bhelgaas@google.com, Jonathan.Cameron@huawei.com,
	rafael.j.wysocki@intel.com, ashok.raj@intel.com,
	tony.luck@intel.com, sathyanarayanan.kuppuswamy@intel.com,
	qiuxu.zhuo@intel.com
Cc: linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org,
	Sean V Kelley <sean.v.kelley@intel.com>
Subject: [PATCH v8 05/14] PCI/ERR: Use "bridge" for clarity in pcie_do_recovery()
Date: Fri,  2 Oct 2020 11:47:26 -0700
Message-ID: <20201002184735.1229220-6-seanvk.dev@oregontracks.org> (raw)
In-Reply-To: <20201002184735.1229220-1-seanvk.dev@oregontracks.org>

From: Sean V Kelley <sean.v.kelley@intel.com>

A generic term such as "bridge" may be used for something with
a subordinate bus. The mix of ports would benefit from a use of
the term. Further clarity can be had in pcie_do_recovery()
with use of pci_upstream_bridge() in place of dev->bus->self.
Reverse the pcie_do_recovery() conditional logic and replace
use of "dev" with "bridge".

Suggested-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sean V Kelley <sean.v.kelley@intel.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
 drivers/pci/pcie/err.c | 28 +++++++++++++++++-----------
 1 file changed, 17 insertions(+), 11 deletions(-)

diff --git a/drivers/pci/pcie/err.c b/drivers/pci/pcie/err.c
index 950612342f1c..e68ea5243ff2 100644
--- a/drivers/pci/pcie/err.c
+++ b/drivers/pci/pcie/err.c
@@ -152,20 +152,26 @@ pci_ers_result_t pcie_do_recovery(struct pci_dev *dev,
 {
 	pci_ers_result_t status = PCI_ERS_RESULT_CAN_RECOVER;
 	struct pci_bus *bus;
+	struct pci_dev *bridge;
+	int type;
 
 	/*
-	 * Error recovery runs on all subordinates of the first downstream port.
-	 * If the downstream port detected the error, it is cleared at the end.
+	 * Error recovery runs on all subordinates of the first downstream
+	 * bridge. If the downstream bridge detected the error, it is
+	 * cleared at the end.
 	 */
-	if (!(pci_pcie_type(dev) == PCI_EXP_TYPE_ROOT_PORT ||
-	      pci_pcie_type(dev) == PCI_EXP_TYPE_DOWNSTREAM))
-		dev = dev->bus->self;
-	bus = dev->subordinate;
-
+	type = pci_pcie_type(dev);
+	if (type == PCI_EXP_TYPE_ROOT_PORT ||
+	    type == PCI_EXP_TYPE_DOWNSTREAM)
+		bridge = dev;
+	else
+		bridge = pci_upstream_bridge(dev);
+
+	bus = bridge->subordinate;
 	pci_dbg(dev, "broadcast error_detected message\n");
 	if (state == pci_channel_io_frozen) {
 		pci_walk_bus(bus, report_frozen_detected, &status);
-		status = reset_subordinate_device(dev);
+		status = reset_subordinate_device(bridge);
 		if (status != PCI_ERS_RESULT_RECOVERED) {
 			pci_warn(dev, "subordinate device reset failed\n");
 			goto failed;
@@ -197,9 +203,9 @@ pci_ers_result_t pcie_do_recovery(struct pci_dev *dev,
 	pci_dbg(dev, "broadcast resume message\n");
 	pci_walk_bus(bus, report_resume, &status);
 
-	if (pcie_aer_is_native(dev))
-		pcie_clear_device_status(dev);
-	pci_aer_clear_nonfatal_status(dev);
+	if (pcie_aer_is_native(bridge))
+		pcie_clear_device_status(bridge);
+	pci_aer_clear_nonfatal_status(bridge);
 	pci_info(dev, "device recovery successful\n");
 	return status;
 
-- 
2.28.0


  parent reply index

Thread overview: 28+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-10-02 18:47 [PATCH v8 00/14] Add RCEC handling to PCI/AER Sean V Kelley
2020-10-02 18:47 ` [PATCH v8 01/14] PCI/RCEC: Add RCEC class code and extended capability Sean V Kelley
2020-10-02 18:47 ` [PATCH v8 02/14] PCI/RCEC: Bind RCEC devices to the Root Port driver Sean V Kelley
2020-10-02 18:47 ` [PATCH v8 03/14] PCI/RCEC: Cache RCEC capabilities in pci_init_capabilities() Sean V Kelley
2020-10-02 18:47 ` [PATCH v8 04/14] PCI/ERR: Rename reset_link() to reset_subordinate_device() Sean V Kelley
2020-10-02 18:47 ` Sean V Kelley [this message]
2020-10-02 18:47 ` [PATCH v8 06/14] PCI/ERR: Add pci_walk_bridge() to pcie_do_recovery() Sean V Kelley
2020-10-02 18:47 ` [PATCH v8 07/14] PCI/ERR: Limit AER resets in pcie_do_recovery() Sean V Kelley
2020-10-02 18:47 ` [PATCH v8 08/14] PCI/AER: Extend AER error handling to RCECs Sean V Kelley
2020-10-09 21:27   ` Bjorn Helgaas
2020-10-09 21:54     ` Sean V Kelley
2020-10-02 18:47 ` [PATCH v8 09/14] PCI/AER: Apply function level reset to RCiEP on fatal error Sean V Kelley
2020-10-02 18:47 ` [PATCH v8 10/14] PCI/RCEC: Add pcie_link_rcec() to associate RCiEPs Sean V Kelley
2020-10-02 18:47 ` [PATCH v8 11/14] PCI/RCEC: Add RCiEP's linked RCEC to AER/ERR Sean V Kelley
2020-10-09 17:57   ` Bjorn Helgaas
2020-10-09 18:26     ` Sean V Kelley
2020-10-09 18:34       ` Sean V Kelley
2020-10-09 18:53         ` Sean V Kelley
2020-10-09 19:48           ` Sean V Kelley
2020-10-09 21:30     ` Bjorn Helgaas
2020-10-09 22:07       ` Sean V Kelley
2020-10-09 23:51         ` Kelley, Sean V
2020-10-12 22:58           ` Bjorn Helgaas
2020-10-13 16:55             ` Sean V Kelley
2020-10-02 18:47 ` [PATCH v8 12/14] PCI/AER: Add pcie_walk_rcec() to RCEC AER handling Sean V Kelley
2020-10-02 18:47 ` [PATCH v8 13/14] PCI/PME: Add pcie_walk_rcec() to RCEC PME handling Sean V Kelley
2020-10-02 18:47 ` [PATCH v8 14/14] PCI/AER: Add RCEC AER error injection support Sean V Kelley
2020-10-09 15:53 ` [PATCH v8 00/14] Add RCEC handling to PCI/AER Bjorn Helgaas

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201002184735.1229220-6-seanvk.dev@oregontracks.org \
    --to=seanvk.dev@oregontracks.org \
    --cc=Jonathan.Cameron@huawei.com \
    --cc=ashok.raj@intel.com \
    --cc=bhelgaas@google.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=qiuxu.zhuo@intel.com \
    --cc=rafael.j.wysocki@intel.com \
    --cc=sathyanarayanan.kuppuswamy@intel.com \
    --cc=sean.v.kelley@intel.com \
    --cc=tony.luck@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-PCI Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-pci/0 linux-pci/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-pci linux-pci/ https://lore.kernel.org/linux-pci \
		linux-pci@vger.kernel.org
	public-inbox-index linux-pci

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-pci


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git