* [PATCH v2] PCI: v3: fix missing clk_disable_unprepare() on error in v3_pci_probe
@ 2020-11-03 7:33 Qinglang Miao
2020-11-03 14:16 ` Rob Herring
0 siblings, 1 reply; 4+ messages in thread
From: Qinglang Miao @ 2020-11-03 7:33 UTC (permalink / raw)
To: Linus Walleij, Lorenzo Pieralisi, Rob Herring, Bjorn Helgaas
Cc: linux-pci, linux-kernel, Qinglang Miao
Fix the missing clk_disable_unprepare() before return
from v3_pci_probe() in the error handling case.
Moving the clock enable later to avoid some fixes.
Fixes: 6e0832fa432e (" PCI: Collect all native drivers under drivers/pci/controller/")
Suggested-by: Rob Herring <robh@kernel.org>
Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com>
---
drivers/pci/controller/pci-v3-semi.c | 40 ++++++++++++++++------------
1 file changed, 23 insertions(+), 17 deletions(-)
diff --git a/drivers/pci/controller/pci-v3-semi.c b/drivers/pci/controller/pci-v3-semi.c
index 154a53986..90520555b 100644
--- a/drivers/pci/controller/pci-v3-semi.c
+++ b/drivers/pci/controller/pci-v3-semi.c
@@ -725,18 +725,6 @@ static int v3_pci_probe(struct platform_device *pdev)
host->sysdata = v3;
v3->dev = dev;
- /* Get and enable host clock */
- clk = devm_clk_get(dev, NULL);
- if (IS_ERR(clk)) {
- dev_err(dev, "clock not found\n");
- return PTR_ERR(clk);
- }
- ret = clk_prepare_enable(clk);
- if (ret) {
- dev_err(dev, "unable to enable clock\n");
- return ret;
- }
-
regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
v3->base = devm_ioremap_resource(dev, regs);
if (IS_ERR(v3->base))
@@ -761,17 +749,31 @@ static int v3_pci_probe(struct platform_device *pdev)
if (IS_ERR(v3->config_base))
return PTR_ERR(v3->config_base);
+ /* Get and enable host clock */
+ clk = devm_clk_get(dev, NULL);
+ if (IS_ERR(clk)) {
+ dev_err(dev, "clock not found\n");
+ return PTR_ERR(clk);
+ }
+ ret = clk_prepare_enable(clk);
+ if (ret) {
+ dev_err(dev, "unable to enable clock\n");
+ return ret;
+ }
+
/* Get and request error IRQ resource */
irq = platform_get_irq(pdev, 0);
- if (irq < 0)
+ if (irq < 0) {
+ clk_disable_unprepare(clk);
return irq;
-
+ }
ret = devm_request_irq(dev, irq, v3_irq, 0,
"PCIv3 error", v3);
if (ret < 0) {
dev_err(dev,
"unable to request PCIv3 error IRQ %d (%d)\n",
irq, ret);
+ clk_disable_unprepare(clk);
return ret;
}
@@ -814,13 +816,15 @@ static int v3_pci_probe(struct platform_device *pdev)
ret = v3_pci_setup_resource(v3, host, win);
if (ret) {
dev_err(dev, "error setting up resources\n");
+ clk_disable_unprepare(clk);
return ret;
}
}
ret = v3_pci_parse_map_dma_ranges(v3, np);
- if (ret)
+ if (ret) {
+ clk_disable_unprepare(clk);
return ret;
-
+ }
/*
* Disable PCI to host IO cycles, enable I/O buffers @3.3V,
* set AD_LOW0 to 1 if one of the LB_MAP registers choose
@@ -862,8 +866,10 @@ static int v3_pci_probe(struct platform_device *pdev)
/* Special Integrator initialization */
if (of_device_is_compatible(np, "arm,integrator-ap-pci")) {
ret = v3_integrator_init(v3);
- if (ret)
+ if (ret) {
+ clk_disable_unprepare(clk);
return ret;
+ }
}
/* Post-init: enable PCI memory and invalidate (master already on) */
--
2.23.0
^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [PATCH v2] PCI: v3: fix missing clk_disable_unprepare() on error in v3_pci_probe
2020-11-03 7:33 [PATCH v2] PCI: v3: fix missing clk_disable_unprepare() on error in v3_pci_probe Qinglang Miao
@ 2020-11-03 14:16 ` Rob Herring
2020-11-06 3:08 ` Qinglang Miao
2020-11-06 3:39 ` Qinglang Miao
0 siblings, 2 replies; 4+ messages in thread
From: Rob Herring @ 2020-11-03 14:16 UTC (permalink / raw)
To: Qinglang Miao
Cc: Linus Walleij, Lorenzo Pieralisi, Bjorn Helgaas, PCI, linux-kernel
On Tue, Nov 3, 2020 at 1:28 AM Qinglang Miao <miaoqinglang@huawei.com> wrote:
>
> Fix the missing clk_disable_unprepare() before return
> from v3_pci_probe() in the error handling case.
>
> Moving the clock enable later to avoid some fixes.
>
> Fixes: 6e0832fa432e (" PCI: Collect all native drivers under drivers/pci/controller/")
I don't think this commit caused the problem.
> Suggested-by: Rob Herring <robh@kernel.org>
> Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com>
> ---
> drivers/pci/controller/pci-v3-semi.c | 40 ++++++++++++++++------------
> 1 file changed, 23 insertions(+), 17 deletions(-)
>
> diff --git a/drivers/pci/controller/pci-v3-semi.c b/drivers/pci/controller/pci-v3-semi.c
> index 154a53986..90520555b 100644
> --- a/drivers/pci/controller/pci-v3-semi.c
> +++ b/drivers/pci/controller/pci-v3-semi.c
> @@ -725,18 +725,6 @@ static int v3_pci_probe(struct platform_device *pdev)
> host->sysdata = v3;
> v3->dev = dev;
>
> - /* Get and enable host clock */
> - clk = devm_clk_get(dev, NULL);
> - if (IS_ERR(clk)) {
> - dev_err(dev, "clock not found\n");
> - return PTR_ERR(clk);
> - }
> - ret = clk_prepare_enable(clk);
> - if (ret) {
> - dev_err(dev, "unable to enable clock\n");
> - return ret;
> - }
> -
> regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> v3->base = devm_ioremap_resource(dev, regs);
> if (IS_ERR(v3->base))
> @@ -761,17 +749,31 @@ static int v3_pci_probe(struct platform_device *pdev)
> if (IS_ERR(v3->config_base))
> return PTR_ERR(v3->config_base);
>
> + /* Get and enable host clock */
> + clk = devm_clk_get(dev, NULL);
> + if (IS_ERR(clk)) {
> + dev_err(dev, "clock not found\n");
> + return PTR_ERR(clk);
> + }
> + ret = clk_prepare_enable(clk);
> + if (ret) {
> + dev_err(dev, "unable to enable clock\n");
> + return ret;
> + }
> +
> /* Get and request error IRQ resource */
> irq = platform_get_irq(pdev, 0);
> - if (irq < 0)
> + if (irq < 0) {
> + clk_disable_unprepare(clk);
> return irq;
> -
> + }
> ret = devm_request_irq(dev, irq, v3_irq, 0,
> "PCIv3 error", v3);
> if (ret < 0) {
> dev_err(dev,
> "unable to request PCIv3 error IRQ %d (%d)\n",
> irq, ret);
> + clk_disable_unprepare(clk);
> return ret;
> }
>
> @@ -814,13 +816,15 @@ static int v3_pci_probe(struct platform_device *pdev)
> ret = v3_pci_setup_resource(v3, host, win);
> if (ret) {
> dev_err(dev, "error setting up resources\n");
> + clk_disable_unprepare(clk);
> return ret;
> }
> }
> ret = v3_pci_parse_map_dma_ranges(v3, np);
> - if (ret)
> + if (ret) {
> + clk_disable_unprepare(clk);
> return ret;
> -
> + }
> /*
> * Disable PCI to host IO cycles, enable I/O buffers @3.3V,
> * set AD_LOW0 to 1 if one of the LB_MAP registers choose
> @@ -862,8 +866,10 @@ static int v3_pci_probe(struct platform_device *pdev)
> /* Special Integrator initialization */
> if (of_device_is_compatible(np, "arm,integrator-ap-pci")) {
> ret = v3_integrator_init(v3);
> - if (ret)
> + if (ret) {
> + clk_disable_unprepare(clk);
You should make all these a goto and just have one clk_disable_unprepare() call.
You are still missing error handling after pci_host_probe().
> return ret;
> + }
> }
>
> /* Post-init: enable PCI memory and invalidate (master already on) */
> --
> 2.23.0
>
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH v2] PCI: v3: fix missing clk_disable_unprepare() on error in v3_pci_probe
2020-11-03 14:16 ` Rob Herring
@ 2020-11-06 3:08 ` Qinglang Miao
2020-11-06 3:39 ` Qinglang Miao
1 sibling, 0 replies; 4+ messages in thread
From: Qinglang Miao @ 2020-11-06 3:08 UTC (permalink / raw)
To: Rob Herring
Cc: Linus Walleij, Lorenzo Pieralisi, Bjorn Helgaas, PCI, linux-kernel
在 2020/11/3 22:16, Rob Herring 写道:
> On Tue, Nov 3, 2020 at 1:28 AM Qinglang Miao <miaoqinglang@huawei.com> wrote:
>>
>> Fix the missing clk_disable_unprepare() before return
>> from v3_pci_probe() in the error handling case.
>>
>> Moving the clock enable later to avoid some fixes.
>>
>> Fixes: 6e0832fa432e (" PCI: Collect all native drivers under drivers/pci/controller/")
>
> I don't think this commit caused the problem.
>
>> Suggested-by: Rob Herring <robh@kernel.org>
>> Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com>
>> ---
>> drivers/pci/controller/pci-v3-semi.c | 40 ++++++++++++++++------------
>> 1 file changed, 23 insertions(+), 17 deletions(-)
>>
>> diff --git a/drivers/pci/controller/pci-v3-semi.c b/drivers/pci/controller/pci-v3-semi.c
>> index 154a53986..90520555b 100644
>> --- a/drivers/pci/controller/pci-v3-semi.c
>> +++ b/drivers/pci/controller/pci-v3-semi.c
>> @@ -725,18 +725,6 @@ static int v3_pci_probe(struct platform_device *pdev)
>> host->sysdata = v3;
>> v3->dev = dev;
>>
>> - /* Get and enable host clock */
>> - clk = devm_clk_get(dev, NULL);
>> - if (IS_ERR(clk)) {
>> - dev_err(dev, "clock not found\n");
>> - return PTR_ERR(clk);
>> - }
>> - ret = clk_prepare_enable(clk);
>> - if (ret) {
>> - dev_err(dev, "unable to enable clock\n");
>> - return ret;
>> - }
>> -
>> regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>> v3->base = devm_ioremap_resource(dev, regs);
>> if (IS_ERR(v3->base))
>> @@ -761,17 +749,31 @@ static int v3_pci_probe(struct platform_device *pdev)
>> if (IS_ERR(v3->config_base))
>> return PTR_ERR(v3->config_base);
>>
>> + /* Get and enable host clock */
>> + clk = devm_clk_get(dev, NULL);
>> + if (IS_ERR(clk)) {
>> + dev_err(dev, "clock not found\n");
>> + return PTR_ERR(clk);
>> + }
>> + ret = clk_prepare_enable(clk);
>> + if (ret) {
>> + dev_err(dev, "unable to enable clock\n");
>> + return ret;
>> + }
>> +
>> /* Get and request error IRQ resource */
>> irq = platform_get_irq(pdev, 0);
>> - if (irq < 0)
>> + if (irq < 0) {
>> + clk_disable_unprepare(clk);
>> return irq;
>> -
>> + }
>> ret = devm_request_irq(dev, irq, v3_irq, 0,
>> "PCIv3 error", v3);
>> if (ret < 0) {
>> dev_err(dev,
>> "unable to request PCIv3 error IRQ %d (%d)\n",
>> irq, ret);
>> + clk_disable_unprepare(clk);
>> return ret;
>> }
>>
>> @@ -814,13 +816,15 @@ static int v3_pci_probe(struct platform_device *pdev)
>> ret = v3_pci_setup_resource(v3, host, win);
>> if (ret) {
>> dev_err(dev, "error setting up resources\n");
>> + clk_disable_unprepare(clk);
>> return ret;
>> }
>> }
>> ret = v3_pci_parse_map_dma_ranges(v3, np);
>> - if (ret)
>> + if (ret) {
>> + clk_disable_unprepare(clk);
>> return ret;
>> -
>> + }
>> /*
>> * Disable PCI to host IO cycles, enable I/O buffers @3.3V,
>> * set AD_LOW0 to 1 if one of the LB_MAP registers choose
>> @@ -862,8 +866,10 @@ static int v3_pci_probe(struct platform_device *pdev)
>> /* Special Integrator initialization */
>> if (of_device_is_compatible(np, "arm,integrator-ap-pci")) {
>> ret = v3_integrator_init(v3);
>> - if (ret)
>> + if (ret) {
>> + clk_disable_unprepare(clk);
>
> You should make all these a goto and just have one clk_disable_unprepare() call.
>
> You are still missing error handling after pci_host_probe().
Hi Rob,
I've sent a v3 patch towards this bug.
Thanks a lot for your advice.
>
>> return ret;
>> + }
>> }
>>
>> /* Post-init: enable PCI memory and invalidate (master already on) */
>> --
>> 2.23.0
>>
> .
>
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH v2] PCI: v3: fix missing clk_disable_unprepare() on error in v3_pci_probe
2020-11-03 14:16 ` Rob Herring
2020-11-06 3:08 ` Qinglang Miao
@ 2020-11-06 3:39 ` Qinglang Miao
1 sibling, 0 replies; 4+ messages in thread
From: Qinglang Miao @ 2020-11-06 3:39 UTC (permalink / raw)
To: Rob Herring
Cc: Linus Walleij, Lorenzo Pieralisi, Bjorn Helgaas, PCI, linux-kernel
在 2020/11/3 22:16, Rob Herring 写道:
> On Tue, Nov 3, 2020 at 1:28 AM Qinglang Miao <miaoqinglang@huawei.com> wrote:
>>
>> Fix the missing clk_disable_unprepare() before return
>> from v3_pci_probe() in the error handling case.
>>
>> Moving the clock enable later to avoid some fixes.
>>
>> Fixes: 6e0832fa432e (" PCI: Collect all native drivers under drivers/pci/controller/")
>
> I don't think this commit caused the problem.
>
>> Suggested-by: Rob Herring <robh@kernel.org>
>> Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com>
>> ---
>> drivers/pci/controller/pci-v3-semi.c | 40 ++++++++++++++++------------
>> 1 file changed, 23 insertions(+), 17 deletions(-)
>>
>> diff --git a/drivers/pci/controller/pci-v3-semi.c b/drivers/pci/controller/pci-v3-semi.c
>> index 154a53986..90520555b 100644
>> --- a/drivers/pci/controller/pci-v3-semi.c
>> +++ b/drivers/pci/controller/pci-v3-semi.c
>> @@ -725,18 +725,6 @@ static int v3_pci_probe(struct platform_device *pdev)
>> host->sysdata = v3;
>> v3->dev = dev;
>>
>> - /* Get and enable host clock */
>> - clk = devm_clk_get(dev, NULL);
>> - if (IS_ERR(clk)) {
>> - dev_err(dev, "clock not found\n");
>> - return PTR_ERR(clk);
>> - }
>> - ret = clk_prepare_enable(clk);
>> - if (ret) {
>> - dev_err(dev, "unable to enable clock\n");
>> - return ret;
>> - }
>> -
>> regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>> v3->base = devm_ioremap_resource(dev, regs);
>> if (IS_ERR(v3->base))
>> @@ -761,17 +749,31 @@ static int v3_pci_probe(struct platform_device *pdev)
>> if (IS_ERR(v3->config_base))
>> return PTR_ERR(v3->config_base);
>>
>> + /* Get and enable host clock */
>> + clk = devm_clk_get(dev, NULL);
>> + if (IS_ERR(clk)) {
>> + dev_err(dev, "clock not found\n");
>> + return PTR_ERR(clk);
>> + }
>> + ret = clk_prepare_enable(clk);
>> + if (ret) {
>> + dev_err(dev, "unable to enable clock\n");
>> + return ret;
>> + }
>> +
>> /* Get and request error IRQ resource */
>> irq = platform_get_irq(pdev, 0);
>> - if (irq < 0)
>> + if (irq < 0) {
>> + clk_disable_unprepare(clk);
>> return irq;
>> -
>> + }
>> ret = devm_request_irq(dev, irq, v3_irq, 0,
>> "PCIv3 error", v3);
>> if (ret < 0) {
>> dev_err(dev,
>> "unable to request PCIv3 error IRQ %d (%d)\n",
>> irq, ret);
>> + clk_disable_unprepare(clk);
>> return ret;
>> }
>>
>> @@ -814,13 +816,15 @@ static int v3_pci_probe(struct platform_device *pdev)
>> ret = v3_pci_setup_resource(v3, host, win);
>> if (ret) {
>> dev_err(dev, "error setting up resources\n");
>> + clk_disable_unprepare(clk);
>> return ret;
>> }
>> }
>> ret = v3_pci_parse_map_dma_ranges(v3, np);
>> - if (ret)
>> + if (ret) {
>> + clk_disable_unprepare(clk);
>> return ret;
>> -
>> + }
>> /*
>> * Disable PCI to host IO cycles, enable I/O buffers @3.3V,
>> * set AD_LOW0 to 1 if one of the LB_MAP registers choose
>> @@ -862,8 +866,10 @@ static int v3_pci_probe(struct platform_device *pdev)
>> /* Special Integrator initialization */
>> if (of_device_is_compatible(np, "arm,integrator-ap-pci")) {
>> ret = v3_integrator_init(v3);
>> - if (ret)
>> + if (ret) {
>> + clk_disable_unprepare(clk);
>
> You should make all these a goto and just have one clk_disable_unprepare() call.
>
> You are still missing error handling after pci_host_probe().
I made a mistake on author name on v3 so resent a v4 on this one.
Sorry about that.
>
>> return ret;
>> + }
>> }
>>
>> /* Post-init: enable PCI memory and invalidate (master already on) */
>> --
>> 2.23.0
>>
> .
>
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2020-11-06 3:39 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-11-03 7:33 [PATCH v2] PCI: v3: fix missing clk_disable_unprepare() on error in v3_pci_probe Qinglang Miao
2020-11-03 14:16 ` Rob Herring
2020-11-06 3:08 ` Qinglang Miao
2020-11-06 3:39 ` Qinglang Miao
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).