From: Sergei Miroshnichenko <s.miroshnichenko@yadro.com>
To: <linux-pci@vger.kernel.org>
Cc: "Bjorn Helgaas" <helgaas@kernel.org>,
"Lukas Wunner" <lukas@wunner.de>, "Stefan Roese" <sr@denx.de>,
"Andy Lavr" <andy.lavr@gmail.com>,
"Christian König" <christian.koenig@amd.com>,
"David Laight" <David.Laight@ACULAB.COM>,
"Rajat Jain" <rajatja@google.com>,
linux@yadro.com,
"Sergei Miroshnichenko" <s.miroshnichenko@yadro.com>
Subject: [PATCH v9 21/26] PCI: Rescan the bus to resize a BAR
Date: Fri, 18 Dec 2020 20:40:06 +0300 [thread overview]
Message-ID: <20201218174011.340514-22-s.miroshnichenko@yadro.com> (raw)
In-Reply-To: <20201218174011.340514-1-s.miroshnichenko@yadro.com>
BAR resizing can be blocked by another BAR, so trigger a bus rescan to be
able to move BARs, increasing the probability of finding a good layout.
Signed-off-by: Sergei Miroshnichenko <s.miroshnichenko@yadro.com>
---
drivers/pci/setup-res.c | 15 ++++++++++++++-
1 file changed, 14 insertions(+), 1 deletion(-)
diff --git a/drivers/pci/setup-res.c b/drivers/pci/setup-res.c
index 28ec3d8c79c8..83a491f6a2c2 100644
--- a/drivers/pci/setup-res.c
+++ b/drivers/pci/setup-res.c
@@ -480,6 +480,9 @@ int pci_resize_resource(struct pci_dev *dev, int resno, int size)
u32 sizes;
u16 cmd;
+ if (pci_dev_bar_fixed(dev, res))
+ return -EOPNOTSUPP;
+
/* Make sure the resource isn't assigned before resizing it. */
if (!(res->flags & IORESOURCE_UNSET))
return -EBUSY;
@@ -506,7 +509,15 @@ int pci_resize_resource(struct pci_dev *dev, int resno, int size)
res->end = res->start + pci_rebar_size_to_bytes(size) - 1;
/* Check if the new config works by trying to assign everything. */
- if (dev->bus->self) {
+ if (pci_can_move_bars) {
+ pci_rescan_bus(dev->bus);
+
+ if (!res->flags || (res->flags & IORESOURCE_UNSET) || !res->parent) {
+ pci_err(dev, "BAR %d resize failed\n", resno);
+ ret = -1;
+ goto error_resize;
+ }
+ } else if (dev->bus->self) {
ret = pci_reassign_bridge_resources(dev->bus->self, res->flags);
if (ret)
goto error_resize;
@@ -516,6 +527,8 @@ int pci_resize_resource(struct pci_dev *dev, int resno, int size)
error_resize:
pci_rebar_set_size(dev, resno, old);
res->end = res->start + pci_rebar_size_to_bytes(old) - 1;
+ if (pci_can_move_bars)
+ pci_rescan_bus(dev->bus);
return ret;
}
EXPORT_SYMBOL(pci_resize_resource);
--
2.24.1
next prev parent reply other threads:[~2020-12-18 17:43 UTC|newest]
Thread overview: 44+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-12-18 17:39 [PATCH v9 00/26] PCI: Allow BAR movement during boot and hotplug Sergei Miroshnichenko
2020-12-18 17:39 ` [PATCH v9 01/26] PCI: Fix race condition in pci_enable/disable_device() Sergei Miroshnichenko
2020-12-28 15:37 ` Sergei Miroshnichenko
2020-12-18 17:39 ` [PATCH v9 02/26] PCI: Ensure a bridge has I/O and MEM access for hot-added devices Sergei Miroshnichenko
2020-12-18 17:39 ` [PATCH v9 03/26] PCI: hotplug: Initial support of the movable BARs feature Sergei Miroshnichenko
2020-12-18 17:39 ` [PATCH v9 04/26] PCI: Add version of release_child_resources() aware of fixed BARs Sergei Miroshnichenko
2020-12-18 17:39 ` [PATCH v9 05/26] PCI: hotplug: Fix reassigning the released BARs Sergei Miroshnichenko
2020-12-18 17:39 ` [PATCH v9 06/26] PCI: hotplug: Recalculate every bridge window during rescan Sergei Miroshnichenko
2020-12-18 17:39 ` [PATCH v9 07/26] PCI: hotplug: Don't allow hot-added devices to steal resources Sergei Miroshnichenko
2020-12-18 17:39 ` [PATCH v9 08/26] PCI: Reassign BARs if BIOS/bootloader had assigned not all of them Sergei Miroshnichenko
2020-12-18 17:39 ` [PATCH v9 09/26] PCI: Movable BARs: Make just a single attempt to assign bridge resources Sergei Miroshnichenko
2020-12-18 17:39 ` [PATCH v9 10/26] PCI: hotplug: Calculate fixed parts of bridge windows Sergei Miroshnichenko
2020-12-18 17:39 ` [PATCH v9 11/26] PCI: Include fixed BARs into the bus size calculating Sergei Miroshnichenko
2020-12-18 17:39 ` [PATCH v9 12/26] PCI: Make sure bridge windows include their fixed BARs Sergei Miroshnichenko
2020-12-18 17:39 ` [PATCH v9 13/26] PCI: hotplug: Add support of fixed BARs to pci_assign_resource() Sergei Miroshnichenko
2020-12-18 17:39 ` [PATCH v9 14/26] PCI: hotplug: Sort fixed BARs before assignment Sergei Miroshnichenko
2020-12-18 17:40 ` [PATCH v9 15/26] x86/PCI/ACPI: Fix up PCIBIOS_MIN_MEM if value computed from e820 is invalid Sergei Miroshnichenko
2020-12-18 17:40 ` [PATCH v9 16/26] PCI: hotplug: Configure MPS after manual bus rescan Sergei Miroshnichenko
2020-12-18 17:40 ` [PATCH v9 17/26] PCI: hotplug: Don't disable the released bridge windows immediately Sergei Miroshnichenko
2020-12-18 17:40 ` [PATCH v9 18/26] PCI: pciehp: Trigger a domain rescan on hp events when enabled movable BARs Sergei Miroshnichenko
2020-12-18 17:40 ` [PATCH v9 19/26] PCI: Don't claim fixed BARs Sergei Miroshnichenko
2020-12-18 17:40 ` [PATCH v9 20/26] PCI: hotplug: Retry bus assignment without reserved space Sergei Miroshnichenko
2020-12-18 17:40 ` Sergei Miroshnichenko [this message]
2020-12-18 17:40 ` [PATCH v9 22/26] PCI: hotplug: Enable the movable BARs feature by default Sergei Miroshnichenko
2020-12-18 17:40 ` [PATCH v9 23/26] PCI/portdrv: Declare support of movable BARs Sergei Miroshnichenko
2020-12-18 17:40 ` [PATCH v9 24/26] nvme-pci: Handle " Sergei Miroshnichenko
2020-12-18 17:40 ` [PATCH v9 25/26] PCI: Add a message for updating BARs Sergei Miroshnichenko
2020-12-18 17:40 ` [PATCH v9 26/26] resource: increase max nesting level for /proc/iomem Sergei Miroshnichenko
2021-01-28 14:53 ` [PATCH v9 00/26] PCI: Allow BAR movement during boot and hotplug Bjorn Helgaas
2021-01-28 20:39 ` Lukas Wunner
2021-02-01 12:55 ` Mika Westerberg
2021-02-03 20:17 ` Sergei Miroshnichenko
2021-02-04 10:49 ` mika.westerberg
2021-02-10 19:40 ` Sergei Miroshnichenko
2021-02-10 21:46 ` Lukas Wunner
2021-02-11 11:39 ` mika.westerberg
2021-02-11 17:45 ` Sergei Miroshnichenko
2021-02-12 12:52 ` mika.westerberg
2021-02-12 20:54 ` Sergei Miroshnichenko
2021-02-15 14:56 ` mika.westerberg
2021-02-03 20:01 ` Sergei Miroshnichenko
2021-02-04 9:34 ` David Laight
2021-02-03 19:59 ` Sergei Miroshnichenko
2021-02-04 8:26 ` Hinko Kocevar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201218174011.340514-22-s.miroshnichenko@yadro.com \
--to=s.miroshnichenko@yadro.com \
--cc=David.Laight@ACULAB.COM \
--cc=andy.lavr@gmail.com \
--cc=christian.koenig@amd.com \
--cc=helgaas@kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=linux@yadro.com \
--cc=lukas@wunner.de \
--cc=rajatja@google.com \
--cc=sr@denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).