[PATCH v4 0/2] ata: ahci_brcm: Fix use of BCM7216 reset controller

[PATCH v4 0/2] ata: ahci_brcm: Fix use of BCM7216 reset controller

[Jim Quinlan]

v4 -- does not rely on a pending commit, unlike v3.

v3 -- discard commit from v2; instead rely on the new function
      reset_control_rearm provided in a recent commit [1] applied
      to reset/next.
   -- New commit to correct pcie-brcmstb.c usage of a reset controller
      to use reset/rearm verses deassert/assert.

v2 -- refactor rescal-reset driver to implement assert/deassert rather than
      reset because the reset call only fires once per lifetime and we need
      to reset after every resume from S2 or S3.
   -- Split the use of "ahci" and "rescal" controllers in separate fields
      to keep things simple.

v1 -- original

Jim Quinlan (2):
  ata: ahci_brcm: Fix use of BCM7216 reset controller
  nPCI: brcmstb: Use reset/rearm instead of deassert/assert

 drivers/ata/ahci_brcm.c               | 46 +++++++++++++--------------
 drivers/pci/controller/pcie-brcmstb.c | 19 +++++++----
 2 files changed, 36 insertions(+), 29 deletions(-)

-- 
2.17.1

[PATCH v4 1/2] ata: ahci_brcm: Fix use of BCM7216 reset controller

[Jim Quinlan]

This driver may use one of two resets controllers.  Keep them in separate
variables to keep things simple.  The reset controller "rescal" is shared
between the AHCI driver and the PCIe driver for the BrcmSTB 7216 chip.  Use
devm_reset_control_get_optional_shared() to handle this sharing.

Fixes: 272ecd60a636 ("ata: ahci_brcm: BCM7216 reset is self de-asserting")
Fixes: c345ec6a50e9 ("ata: ahci_brcm: Support BCM7216 reset controller name")
Signed-off-by: Jim Quinlan <jim2101024@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
---
 drivers/ata/ahci_brcm.c | 46 ++++++++++++++++++++---------------------
 1 file changed, 23 insertions(+), 23 deletions(-)

diff --git a/drivers/ata/ahci_brcm.c b/drivers/ata/ahci_brcm.c
index 5b32df5d33ad..6e9c5ade4c2e 100644
--- a/drivers/ata/ahci_brcm.c
+++ b/drivers/ata/ahci_brcm.c
@@ -86,7 +86,8 @@ struct brcm_ahci_priv {
 	u32 port_mask;
 	u32 quirks;
 	enum brcm_ahci_version version;
-	struct reset_control *rcdev;
+	struct reset_control *rcdev_rescal;
+	struct reset_control *rcdev_ahci;
 };
 
 static inline u32 brcm_sata_readreg(void __iomem *addr)
@@ -352,8 +353,8 @@ static int brcm_ahci_suspend(struct device *dev)
 	else
 		ret = 0;
 
-	if (priv->version != BRCM_SATA_BCM7216)
-		reset_control_assert(priv->rcdev);
+	reset_control_assert(priv->rcdev_ahci);
+	reset_control_rearm(priv->rcdev_rescal);
 
 	return ret;
 }
@@ -365,10 +366,10 @@ static int __maybe_unused brcm_ahci_resume(struct device *dev)
 	struct brcm_ahci_priv *priv = hpriv->plat_data;
 	int ret = 0;
 
-	if (priv->version == BRCM_SATA_BCM7216)
-		ret = reset_control_reset(priv->rcdev);
-	else
-		ret = reset_control_deassert(priv->rcdev);
+	ret = reset_control_deassert(priv->rcdev_ahci);
+	if (ret)
+		return ret;
+	ret = reset_control_reset(priv->rcdev_rescal);
 	if (ret)
 		return ret;
 
@@ -434,7 +435,6 @@ static int brcm_ahci_probe(struct platform_device *pdev)
 {
 	const struct of_device_id *of_id;
 	struct device *dev = &pdev->dev;
-	const char *reset_name = NULL;
 	struct brcm_ahci_priv *priv;
 	struct ahci_host_priv *hpriv;
 	struct resource *res;
@@ -456,15 +456,15 @@ static int brcm_ahci_probe(struct platform_device *pdev)
 	if (IS_ERR(priv->top_ctrl))
 		return PTR_ERR(priv->top_ctrl);
 
-	/* Reset is optional depending on platform and named differently */
-	if (priv->version == BRCM_SATA_BCM7216)
-		reset_name = "rescal";
-	else
-		reset_name = "ahci";
-
-	priv->rcdev = devm_reset_control_get_optional(&pdev->dev, reset_name);
-	if (IS_ERR(priv->rcdev))
-		return PTR_ERR(priv->rcdev);
+	if (priv->version == BRCM_SATA_BCM7216) {
+		priv->rcdev_rescal = devm_reset_control_get_optional_shared(
+			&pdev->dev, "rescal");
+		if (IS_ERR(priv->rcdev_rescal))
+			return PTR_ERR(priv->rcdev_rescal);
+	}
+	priv->rcdev_ahci = devm_reset_control_get_optional(&pdev->dev, "ahci");
+	if (IS_ERR(priv->rcdev_ahci))
+		return PTR_ERR(priv->rcdev_ahci);
 
 	hpriv = ahci_platform_get_resources(pdev, 0);
 	if (IS_ERR(hpriv))
@@ -485,10 +485,10 @@ static int brcm_ahci_probe(struct platform_device *pdev)
 		break;
 	}
 
-	if (priv->version == BRCM_SATA_BCM7216)
-		ret = reset_control_reset(priv->rcdev);
-	else
-		ret = reset_control_deassert(priv->rcdev);
+	ret = reset_control_reset(priv->rcdev_rescal);
+	if (ret)
+		return ret;
+	ret = reset_control_deassert(priv->rcdev_ahci);
 	if (ret)
 		return ret;
 
@@ -539,8 +539,8 @@ static int brcm_ahci_probe(struct platform_device *pdev)
 out_disable_clks:
 	ahci_platform_disable_clks(hpriv);
 out_reset:
-	if (priv->version != BRCM_SATA_BCM7216)
-		reset_control_assert(priv->rcdev);
+	reset_control_assert(priv->rcdev_ahci);
+	reset_control_rearm(priv->rcdev_rescal);
 	return ret;
 }
 
-- 
2.17.1

[PATCH v4 2/2] nPCI: brcmstb: Use reset/rearm instead of deassert/assert

[Jim Quinlan]

The Brcmstb PCIe RC uses a reset control "rescal" for certain chips.  This
reset implements a "pulse reset" so it matches more the reset/rearm
calls instead of the deassert/assert calls.

Also, add reset_control calls in suspend/resume functions.

Fixes: 740d6c3708a9 ("PCI: brcmstb: Add control of rescal reset")
Signed-off-by: Jim Quinlan <jim2101024@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
---
 drivers/pci/controller/pcie-brcmstb.c | 19 +++++++++++++------
 1 file changed, 13 insertions(+), 6 deletions(-)

diff --git a/drivers/pci/controller/pcie-brcmstb.c b/drivers/pci/controller/pcie-brcmstb.c
index e330e6811f0b..18f23cba7e3a 100644
--- a/drivers/pci/controller/pcie-brcmstb.c
+++ b/drivers/pci/controller/pcie-brcmstb.c
@@ -1148,6 +1148,7 @@ static int brcm_pcie_suspend(struct device *dev)
 
 	brcm_pcie_turn_off(pcie);
 	ret = brcm_phy_stop(pcie);
+	reset_control_rearm(pcie->rescal);
 	clk_disable_unprepare(pcie->clk);
 
 	return ret;
@@ -1163,9 +1164,13 @@ static int brcm_pcie_resume(struct device *dev)
 	base = pcie->base;
 	clk_prepare_enable(pcie->clk);
 
+	ret = reset_control_reset(pcie->rescal);
+	if (ret)
+		goto err0;
+
 	ret = brcm_phy_start(pcie);
 	if (ret)
-		goto err;
+		goto err1;
 
 	/* Take bridge out of reset so we can access the SERDES reg */
 	pcie->bridge_sw_init_set(pcie, 0);
@@ -1180,14 +1185,16 @@ static int brcm_pcie_resume(struct device *dev)
 
 	ret = brcm_pcie_setup(pcie);
 	if (ret)
-		goto err;
+		goto err1;
 
 	if (pcie->msi)
 		brcm_msi_set_regs(pcie->msi);
 
 	return 0;
 
-err:
+err1:
+	reset_control_rearm(pcie->rescal);
+err0:
 	clk_disable_unprepare(pcie->clk);
 	return ret;
 }
@@ -1197,7 +1204,7 @@ static void __brcm_pcie_remove(struct brcm_pcie *pcie)
 	brcm_msi_remove(pcie);
 	brcm_pcie_turn_off(pcie);
 	brcm_phy_stop(pcie);
-	reset_control_assert(pcie->rescal);
+	reset_control_rearm(pcie->rescal);
 	clk_disable_unprepare(pcie->clk);
 }
 
@@ -1278,13 +1285,13 @@ static int brcm_pcie_probe(struct platform_device *pdev)
 		return PTR_ERR(pcie->perst_reset);
 	}
 
-	ret = reset_control_deassert(pcie->rescal);
+	ret = reset_control_reset(pcie->rescal);
 	if (ret)
 		dev_err(&pdev->dev, "failed to deassert 'rescal'\n");
 
 	ret = brcm_phy_start(pcie);
 	if (ret) {
-		reset_control_assert(pcie->rescal);
+		reset_control_rearm(pcie->rescal);
 		clk_disable_unprepare(pcie->clk);
 		return ret;
 	}
-- 
2.17.1

Re: [PATCH v4 2/2] nPCI: brcmstb: Use reset/rearm instead of deassert/assert

[Krzysztof Wilczyński]

Hi,

Thank you for sending the patches over!

> The Brcmstb PCIe RC uses a reset control "rescal" for certain chips.  This
[...]

A small suggestion: it would be nicer to mention "Broadcom STB" rather
than "Brcmstb" in the sentence above.

[...]
> +err1:
> +	reset_control_rearm(pcie->rescal);
> +err0:
>  	clk_disable_unprepare(pcie->clk);
>  	return ret;
[...]

A small nitpick.  Now that there are two labels on the error recovery
path, it might be better to name both of these labels a little bit
better.  Some examples from the PCI tree:

  error_clock_unprepare
  err_disable_clock
  err_disable_clk
  err_clk_disable
  
So it could be:

  err_reset:                                <-- or err_rearm or even err_reset_rearm, etc.
  	reset_control_rearm(pcie->rescal);
  err_disable_clk:
   	clk_disable_unprepare(pcie->clk);

What do you think?

Krzysztof

Re: [PATCH v4 2/2] nPCI: brcmstb: Use reset/rearm instead of deassert/assert

[Bjorn Helgaas]

If you update this, please fix the s/nPCI: /PCI: / in the subject

On Mon, Mar 08, 2021 at 02:50:37PM -0500, Jim Quinlan wrote:
> The Brcmstb PCIe RC uses a reset control "rescal" for certain chips.  This
> reset implements a "pulse reset" so it matches more the reset/rearm
> calls instead of the deassert/assert calls.

You say "also" below, but the paragraph above doesn't tell us the
*first* thing this patch does.  It just tells us that some chips use
"rescal" and that "rescal" implements a "pulse reset".

I guess you're replacing reset_control_deassert() with
reset_control_reset(), and reset_control_assert() with
reset_control_rearm().

It's not obvious to me that those are equivalent or why it's safe to
do this for all chips, including those that don't use the "rescal"
(since it sounds like only certain chips have that).

> Also, add reset_control calls in suspend/resume functions.
> 
> Fixes: 740d6c3708a9 ("PCI: brcmstb: Add control of rescal reset")
> Signed-off-by: Jim Quinlan <jim2101024@gmail.com>
> Acked-by: Florian Fainelli <f.fainelli@gmail.com>
> ---
>  drivers/pci/controller/pcie-brcmstb.c | 19 +++++++++++++------
>  1 file changed, 13 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/pci/controller/pcie-brcmstb.c b/drivers/pci/controller/pcie-brcmstb.c
> index e330e6811f0b..18f23cba7e3a 100644
> --- a/drivers/pci/controller/pcie-brcmstb.c
> +++ b/drivers/pci/controller/pcie-brcmstb.c
> @@ -1148,6 +1148,7 @@ static int brcm_pcie_suspend(struct device *dev)
>  
>  	brcm_pcie_turn_off(pcie);
>  	ret = brcm_phy_stop(pcie);
> +	reset_control_rearm(pcie->rescal);
>  	clk_disable_unprepare(pcie->clk);
>  
>  	return ret;
> @@ -1163,9 +1164,13 @@ static int brcm_pcie_resume(struct device *dev)
>  	base = pcie->base;
>  	clk_prepare_enable(pcie->clk);
>  
> +	ret = reset_control_reset(pcie->rescal);
> +	if (ret)
> +		goto err0;
> +
>  	ret = brcm_phy_start(pcie);
>  	if (ret)
> -		goto err;
> +		goto err1;
>  
>  	/* Take bridge out of reset so we can access the SERDES reg */
>  	pcie->bridge_sw_init_set(pcie, 0);
> @@ -1180,14 +1185,16 @@ static int brcm_pcie_resume(struct device *dev)
>  
>  	ret = brcm_pcie_setup(pcie);
>  	if (ret)
> -		goto err;
> +		goto err1;
>  
>  	if (pcie->msi)
>  		brcm_msi_set_regs(pcie->msi);
>  
>  	return 0;
>  
> -err:
> +err1:
> +	reset_control_rearm(pcie->rescal);
> +err0:
>  	clk_disable_unprepare(pcie->clk);
>  	return ret;
>  }
> @@ -1197,7 +1204,7 @@ static void __brcm_pcie_remove(struct brcm_pcie *pcie)
>  	brcm_msi_remove(pcie);
>  	brcm_pcie_turn_off(pcie);
>  	brcm_phy_stop(pcie);
> -	reset_control_assert(pcie->rescal);
> +	reset_control_rearm(pcie->rescal);
>  	clk_disable_unprepare(pcie->clk);
>  }
>  
> @@ -1278,13 +1285,13 @@ static int brcm_pcie_probe(struct platform_device *pdev)
>  		return PTR_ERR(pcie->perst_reset);
>  	}
>  
> -	ret = reset_control_deassert(pcie->rescal);
> +	ret = reset_control_reset(pcie->rescal);
>  	if (ret)
>  		dev_err(&pdev->dev, "failed to deassert 'rescal'\n");
>  
>  	ret = brcm_phy_start(pcie);
>  	if (ret) {
> -		reset_control_assert(pcie->rescal);
> +		reset_control_rearm(pcie->rescal);
>  		clk_disable_unprepare(pcie->clk);
>  		return ret;
>  	}
> -- 
> 2.17.1
>