[PATCH AUTOSEL 5.13 05/53] PCI: ftpci100: Rename macro name collision

[PATCH AUTOSEL 5.13 05/53] PCI: ftpci100: Rename macro name collision

[Sasha Levin]

From: Randy Dunlap <rdunlap@infradead.org>

[ Upstream commit 5be967d5016ac5ffb9c4d0df51b48441ee4d5ed1 ]

PCI_IOSIZE is defined in mach-loongson64/spaces.h, so change the name
of the PCI_* macros in pci-ftpci100.c to use FTPCI_* so that they are
more localized and won't conflict with other drivers or arches.

../drivers/pci/controller/pci-ftpci100.c:37: warning: "PCI_IOSIZE" redefined
   37 | #define PCI_IOSIZE 0x00
      |
In file included from ../arch/mips/include/asm/addrspace.h:13,
...              from ../drivers/pci/controller/pci-ftpci100.c:15:
arch/mips/include/asm/mach-loongson64/spaces.h:11: note: this is the location of the previous definition
   11 | #define PCI_IOSIZE SZ_16M

Suggested-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20210517234117.3660-1-rdunlap@infradead.org
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Krzysztof Wilczyński <kw@linux.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: linux-mips@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/controller/pci-ftpci100.c | 30 +++++++++++++--------------
 1 file changed, 15 insertions(+), 15 deletions(-)

diff --git a/drivers/pci/controller/pci-ftpci100.c b/drivers/pci/controller/pci-ftpci100.c
index da3cd216da00..aefef1986201 100644
--- a/drivers/pci/controller/pci-ftpci100.c
+++ b/drivers/pci/controller/pci-ftpci100.c
@@ -34,12 +34,12 @@
  * Special configuration registers directly in the first few words
  * in I/O space.
  */
-#define PCI_IOSIZE	0x00
-#define PCI_PROT	0x04 /* AHB protection */
-#define PCI_CTRL	0x08 /* PCI control signal */
-#define PCI_SOFTRST	0x10 /* Soft reset counter and response error enable */
-#define PCI_CONFIG	0x28 /* PCI configuration command register */
-#define PCI_DATA	0x2C
+#define FTPCI_IOSIZE	0x00
+#define FTPCI_PROT	0x04 /* AHB protection */
+#define FTPCI_CTRL	0x08 /* PCI control signal */
+#define FTPCI_SOFTRST	0x10 /* Soft reset counter and response error enable */
+#define FTPCI_CONFIG	0x28 /* PCI configuration command register */
+#define FTPCI_DATA	0x2C
 
 #define FARADAY_PCI_STATUS_CMD		0x04 /* Status and command */
 #define FARADAY_PCI_PMC			0x40 /* Power management control */
@@ -195,9 +195,9 @@ static int faraday_raw_pci_read_config(struct faraday_pci *p, int bus_number,
 			PCI_CONF_FUNCTION(PCI_FUNC(fn)) |
 			PCI_CONF_WHERE(config) |
 			PCI_CONF_ENABLE,
-			p->base + PCI_CONFIG);
+			p->base + FTPCI_CONFIG);
 
-	*value = readl(p->base + PCI_DATA);
+	*value = readl(p->base + FTPCI_DATA);
 
 	if (size == 1)
 		*value = (*value >> (8 * (config & 3))) & 0xFF;
@@ -230,17 +230,17 @@ static int faraday_raw_pci_write_config(struct faraday_pci *p, int bus_number,
 			PCI_CONF_FUNCTION(PCI_FUNC(fn)) |
 			PCI_CONF_WHERE(config) |
 			PCI_CONF_ENABLE,
-			p->base + PCI_CONFIG);
+			p->base + FTPCI_CONFIG);
 
 	switch (size) {
 	case 4:
-		writel(value, p->base + PCI_DATA);
+		writel(value, p->base + FTPCI_DATA);
 		break;
 	case 2:
-		writew(value, p->base + PCI_DATA + (config & 3));
+		writew(value, p->base + FTPCI_DATA + (config & 3));
 		break;
 	case 1:
-		writeb(value, p->base + PCI_DATA + (config & 3));
+		writeb(value, p->base + FTPCI_DATA + (config & 3));
 		break;
 	default:
 		ret = PCIBIOS_BAD_REGISTER_NUMBER;
@@ -469,7 +469,7 @@ static int faraday_pci_probe(struct platform_device *pdev)
 		if (!faraday_res_to_memcfg(io->start - win->offset,
 					   resource_size(io), &val)) {
 			/* setup I/O space size */
-			writel(val, p->base + PCI_IOSIZE);
+			writel(val, p->base + FTPCI_IOSIZE);
 		} else {
 			dev_err(dev, "illegal IO mem size\n");
 			return -EINVAL;
@@ -477,11 +477,11 @@ static int faraday_pci_probe(struct platform_device *pdev)
 	}
 
 	/* Setup hostbridge */
-	val = readl(p->base + PCI_CTRL);
+	val = readl(p->base + FTPCI_CTRL);
 	val |= PCI_COMMAND_IO;
 	val |= PCI_COMMAND_MEMORY;
 	val |= PCI_COMMAND_MASTER;
-	writel(val, p->base + PCI_CTRL);
+	writel(val, p->base + FTPCI_CTRL);
 	/* Mask and clear all interrupts */
 	faraday_raw_pci_write_config(p, 0, 0, FARADAY_PCI_CTRL2 + 2, 2, 0xF000);
 	if (variant->cascaded_irq) {
-- 
2.30.2

[PATCH AUTOSEL 5.13 09/53] PCI: hv: Fix a race condition when removing the device

[Sasha Levin]

From: Long Li <longli@microsoft.com>

[ Upstream commit 94d22763207ac6633612b8d8e0ca4fba0f7aa139 ]

On removing the device, any work item (hv_pci_devices_present() or
hv_pci_eject_device()) scheduled on workqueue hbus->wq may still be running
and race with hv_pci_remove().

This can happen because the host may send PCI_EJECT or PCI_BUS_RELATIONS(2)
and decide to rescind the channel immediately after that.

Fix this by flushing/destroying the workqueue of hbus before doing hbus remove.

Link: https://lore.kernel.org/r/1620806800-30983-1-git-send-email-longli@linuxonhyperv.com
Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/controller/pci-hyperv.c | 30 ++++++++++++++++++++++-------
 1 file changed, 23 insertions(+), 7 deletions(-)

diff --git a/drivers/pci/controller/pci-hyperv.c b/drivers/pci/controller/pci-hyperv.c
index 6511648271b2..272c63ac49f9 100644
--- a/drivers/pci/controller/pci-hyperv.c
+++ b/drivers/pci/controller/pci-hyperv.c
@@ -444,7 +444,6 @@ enum hv_pcibus_state {
 	hv_pcibus_probed,
 	hv_pcibus_installed,
 	hv_pcibus_removing,
-	hv_pcibus_removed,
 	hv_pcibus_maximum
 };
 
@@ -3243,8 +3242,9 @@ static int hv_pci_bus_exit(struct hv_device *hdev, bool keep_devs)
 		struct pci_packet teardown_packet;
 		u8 buffer[sizeof(struct pci_message)];
 	} pkt;
-	struct hv_dr_state *dr;
 	struct hv_pci_compl comp_pkt;
+	struct hv_pci_dev *hpdev, *tmp;
+	unsigned long flags;
 	int ret;
 
 	/*
@@ -3256,9 +3256,16 @@ static int hv_pci_bus_exit(struct hv_device *hdev, bool keep_devs)
 
 	if (!keep_devs) {
 		/* Delete any children which might still exist. */
-		dr = kzalloc(sizeof(*dr), GFP_KERNEL);
-		if (dr && hv_pci_start_relations_work(hbus, dr))
-			kfree(dr);
+		spin_lock_irqsave(&hbus->device_list_lock, flags);
+		list_for_each_entry_safe(hpdev, tmp, &hbus->children, list_entry) {
+			list_del(&hpdev->list_entry);
+			if (hpdev->pci_slot)
+				pci_destroy_slot(hpdev->pci_slot);
+			/* For the two refs got in new_pcichild_device() */
+			put_pcichild(hpdev);
+			put_pcichild(hpdev);
+		}
+		spin_unlock_irqrestore(&hbus->device_list_lock, flags);
 	}
 
 	ret = hv_send_resources_released(hdev);
@@ -3301,13 +3308,23 @@ static int hv_pci_remove(struct hv_device *hdev)
 
 	hbus = hv_get_drvdata(hdev);
 	if (hbus->state == hv_pcibus_installed) {
+		tasklet_disable(&hdev->channel->callback_event);
+		hbus->state = hv_pcibus_removing;
+		tasklet_enable(&hdev->channel->callback_event);
+		destroy_workqueue(hbus->wq);
+		hbus->wq = NULL;
+		/*
+		 * At this point, no work is running or can be scheduled
+		 * on hbus-wq. We can't race with hv_pci_devices_present()
+		 * or hv_pci_eject_device(), it's safe to proceed.
+		 */
+
 		/* Remove the bus from PCI's point of view. */
 		pci_lock_rescan_remove();
 		pci_stop_root_bus(hbus->pci_bus);
 		hv_pci_remove_slots(hbus);
 		pci_remove_root_bus(hbus->pci_bus);
 		pci_unlock_rescan_remove();
-		hbus->state = hv_pcibus_removed;
 	}
 
 	ret = hv_pci_bus_exit(hdev, false);
@@ -3322,7 +3339,6 @@ static int hv_pci_remove(struct hv_device *hdev)
 	irq_domain_free_fwnode(hbus->sysdata.fwnode);
 	put_hvpcibus(hbus);
 	wait_for_completion(&hbus->remove_event);
-	destroy_workqueue(hbus->wq);
 
 	hv_put_dom_num(hbus->sysdata.domain);
 
-- 
2.30.2