From: Jim Quinlan <jim2101024@gmail.com>
To: linux-pci@vger.kernel.org, Bjorn Helgaas <bhelgaas@google.com>,
Nicolas Saenz Julienne <nsaenz@kernel.org>,
Rob Herring <robh@kernel.org>, Mark Brown <broonie@kernel.org>,
bcm-kernel-feedback-list@broadcom.com, jim2101024@gmail.com,
james.quinlan@broadcom.com
Cc: Florian Fainelli <f.fainelli@gmail.com>,
Rob Herring <robh+dt@kernel.org>,
Saenz Julienne <nsaenzjulienne@suse.de>,
linux-rpi-kernel@lists.infradead.org (moderated list:BROADCOM
BCM2711/BCM2835 ARM ARCHITECTURE),
linux-arm-kernel@lists.infradead.org (moderated list:BROADCOM
BCM2711/BCM2835 ARM ARCHITECTURE),
devicetree@vger.kernel.org (open list:OPEN FIRMWARE AND
FLATTENED DEVICE TREE BINDINGS),
linux-kernel@vger.kernel.org (open list)
Subject: [PATCH v8 3/8] dt-bindings: PCI: Add bindings for Brcmstb EP voltage regulators
Date: Wed, 10 Nov 2021 17:14:43 -0500 [thread overview]
Message-ID: <20211110221456.11977-4-jim2101024@gmail.com> (raw)
In-Reply-To: <20211110221456.11977-1-jim2101024@gmail.com>
Similar to the regulator bindings found in "rockchip-pcie-host.txt", this
allows optional regulators to be attached and controlled by the PCIe RC
driver. That being said, this driver searches in the DT subnode (the EP
node, eg pci-ep@0,0) for the regulator property.
The use of a regulator property in the pcie EP subnode such as
"vpcie12v-supply" depends on a pending pullreq to the pci-bus.yaml
file at
https://github.com/devicetree-org/dt-schema/pull/63
Signed-off-by: Jim Quinlan <jim2101024@gmail.com>
---
.../bindings/pci/brcm,stb-pcie.yaml | 23 +++++++++++++++++++
1 file changed, 23 insertions(+)
diff --git a/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
index 508e5dce1282..ef2427320b7d 100644
--- a/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
+++ b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
@@ -158,5 +158,28 @@ examples:
<0x42000000 0x1 0x80000000 0x3 0x00000000 0x0 0x80000000>;
brcm,enable-ssc;
brcm,scb-sizes = <0x0000000080000000 0x0000000080000000>;
+
+ /* PCIe bridge */
+ pci@0,0 {
+ #address-cells = <3>;
+ #size-cells = <2>;
+ reg = <0x0 0x0 0x0 0x0 0x0>;
+ compatible = "pciclass,0604";
+ device_type = "pci";
+ vpcie3v3-supply = <&vreg7>;
+ ranges;
+
+ /* PCIe endpoint */
+ pci-ep@0,0 {
+ assigned-addresses =
+ <0x82010000 0x0 0xf8000000 0x6 0x00000000 0x0 0x2000>;
+ reg = <0x0 0x0 0x0 0x0 0x0>;
+ compatible = "pci14e4,1688";
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ ranges;
+ };
+ };
};
};
--
2.17.1
next prev parent reply other threads:[~2021-11-10 22:17 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-11-10 22:14 [PATCH v8 0/8] PCI: brcmstb: have portdrv turn on sub-device power Jim Quinlan
2021-11-10 22:14 ` [PATCH v8 1/8] PCI: brcmstb: Change brcm_phy_stop() to return void Jim Quinlan
2021-11-11 21:57 ` Bjorn Helgaas
2021-11-15 20:56 ` Jim Quinlan
2021-11-16 20:40 ` Bjorn Helgaas
2021-11-10 22:14 ` [PATCH v8 2/8] dt-bindings: PCI: Correct brcmstb interrupts, interrupt-map Jim Quinlan
2021-11-10 22:14 ` Jim Quinlan [this message]
2021-11-11 22:17 ` [PATCH v8 3/8] dt-bindings: PCI: Add bindings for Brcmstb EP voltage regulators Bjorn Helgaas
2021-11-12 18:25 ` Jim Quinlan
2021-11-12 20:20 ` Bjorn Helgaas
2021-11-12 21:46 ` Rob Herring
2021-11-13 11:38 ` Pali Rohár
2021-11-10 22:14 ` [PATCH v8 4/8] PCI/portdrv: Create pcie_is_port_dev() func from existing code Jim Quinlan
2021-11-11 21:51 ` Florian Fainelli
2021-11-11 22:53 ` Rob Herring
2021-11-11 23:50 ` Krzysztof Wilczyński
2021-11-12 18:14 ` Jim Quinlan
2021-11-10 22:14 ` [PATCH v8 5/8] PCI/portdrv: add mechanism to turn on subdev regulators Jim Quinlan
2021-11-11 9:44 ` kernel test robot
2021-11-11 22:12 ` Bjorn Helgaas
2021-11-11 22:50 ` Rob Herring
2021-11-11 22:56 ` Rob Herring
2021-11-15 20:44 ` Jim Quinlan
2021-11-16 17:41 ` Rob Herring
2021-11-16 20:53 ` Pali Rohár
2021-11-17 15:14 ` Jim Quinlan
2021-11-17 15:45 ` Pali Rohár
2021-11-18 15:36 ` Jim Quinlan
2021-11-18 15:50 ` Pali Rohár
2021-11-17 14:46 ` Jim Quinlan
2021-11-11 23:38 ` Krzysztof Wilczyński
2021-11-15 20:26 ` Jim Quinlan
2021-11-10 22:14 ` [PATCH v8 6/8] PCI/portdrv: Do not turn off subdev regulators if EP can wake up Jim Quinlan
2021-11-10 22:14 ` [PATCH v8 7/8] PCI: brcmstb: Split brcm_pcie_setup() into two funcs Jim Quinlan
2021-11-10 22:14 ` [PATCH v8 8/8] PCI: brcmstb: Add control of subdevice voltage regulators Jim Quinlan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211110221456.11977-4-jim2101024@gmail.com \
--to=jim2101024@gmail.com \
--cc=bcm-kernel-feedback-list@broadcom.com \
--cc=bhelgaas@google.com \
--cc=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=f.fainelli@gmail.com \
--cc=james.quinlan@broadcom.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=linux-rpi-kernel@lists.infradead.org \
--cc=nsaenz@kernel.org \
--cc=nsaenzjulienne@suse.de \
--cc=robh+dt@kernel.org \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).