linux-pci.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "Marek Behún" <kabel@kernel.org>
To: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>,
	Bjorn Helgaas <helgaas@kernel.org>
Cc: "Krzysztof Wilczyński" <kw@linux.com>,
	"Marc Zyngier" <maz@kernel.org>,
	pali@kernel.org, linux-pci@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	"Gregory CLEMENT" <gregory.clement@bootlin.com>,
	"Miquel Raynal" <miquel.raynal@bootlin.com>,
	"Marek Behún" <kabel@kernel.org>
Subject: [PATCH 16/18] PCI: aardvark: Add suspend to RAM support
Date: Sun, 20 Feb 2022 20:33:44 +0100	[thread overview]
Message-ID: <20220220193346.23789-17-kabel@kernel.org> (raw)
In-Reply-To: <20220220193346.23789-1-kabel@kernel.org>

From: Miquel Raynal <miquel.raynal@bootlin.com>

Add suspend and resume callbacks. The priority of these are
"_noirq()", to workaround early access to the registers done by the
PCI core through the ->read()/->write() callbacks at resume time.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <kabel@kernel.org>
---
 drivers/pci/controller/pci-aardvark.c | 39 +++++++++++++++++++++++++++
 1 file changed, 39 insertions(+)

diff --git a/drivers/pci/controller/pci-aardvark.c b/drivers/pci/controller/pci-aardvark.c
index 3b51f47abd72..8c9ac7766ac7 100644
--- a/drivers/pci/controller/pci-aardvark.c
+++ b/drivers/pci/controller/pci-aardvark.c
@@ -1896,6 +1896,44 @@ static int advk_pcie_setup_phy(struct advk_pcie *pcie)
 	return ret;
 }
 
+static int __maybe_unused advk_pcie_suspend(struct device *dev)
+{
+	struct advk_pcie *pcie = dev_get_drvdata(dev);
+
+	advk_pcie_disable_phy(pcie);
+
+	clk_disable_unprepare(pcie->clk);
+
+	return 0;
+}
+
+static int __maybe_unused advk_pcie_resume(struct device *dev)
+{
+	struct advk_pcie *pcie = dev_get_drvdata(dev);
+	int ret;
+
+	ret = clk_prepare_enable(pcie->clk);
+	if (ret)
+		return ret;
+
+	ret = advk_pcie_enable_phy(pcie);
+	if (ret)
+		return ret;
+
+	advk_pcie_setup_hw(pcie);
+
+	return 0;
+}
+
+/*
+ * The PCI core will try to reconfigure the bus quite early in the resume path.
+ * We must use the _noirq() alternatives to ensure the controller is ready when
+ * the core uses the ->read()/->write() callbacks.
+ */
+static const struct dev_pm_ops advk_pcie_dev_pm_ops = {
+	SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(advk_pcie_suspend, advk_pcie_resume)
+};
+
 static int advk_pcie_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
@@ -2171,6 +2209,7 @@ static struct platform_driver advk_pcie_driver = {
 	.driver = {
 		.name = "advk-pcie",
 		.of_match_table = advk_pcie_of_match_table,
+		.pm = &advk_pcie_dev_pm_ops,
 	},
 	.probe = advk_pcie_probe,
 	.remove = advk_pcie_remove,
-- 
2.34.1


  parent reply	other threads:[~2022-02-20 19:34 UTC|newest]

Thread overview: 44+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-02-20 19:33 [PATCH 00/18] PCI: aardvark controller changes BATCH 5 Marek Behún
2022-02-20 19:33 ` [PATCH 01/18] PCI: pci-bridge-emul: Re-arrange register tests Marek Behún
2022-02-20 19:33 ` [PATCH 02/18] PCI: pci-bridge-emul: Add support for PCIe extended capabilities Marek Behún
2022-02-20 19:33 ` [PATCH 03/18] PCI: aardvark: Add support for AER registers on emulated bridge Marek Behún
2022-02-20 19:33 ` [PATCH 04/18] PCI: Add PCI_EXP_SLTCAP_*_SHIFT macros Marek Behún
2022-04-28 11:09   ` Lorenzo Pieralisi
2022-04-28 11:16     ` Pali Rohár
2022-05-18 19:23   ` Bjorn Helgaas
2022-05-18 19:26     ` Pali Rohár
2022-05-18 20:05       ` Marek Behún
2022-05-18 20:27         ` Bjorn Helgaas
2022-02-20 19:33 ` [PATCH 05/18] PCI: aardvark: Fix reporting Slot capabilities on emulated bridge Marek Behún
2022-02-20 19:33 ` [PATCH 06/18] PCI: pciehp: Enable DLLSC interrupt only if supported Marek Behún
2022-05-09  3:42   ` Lukas Wunner
2022-05-13 16:57     ` Pali Rohár
2022-05-14  9:14       ` Lukas Wunner
2022-08-18 12:22         ` Marek Behún
2022-02-20 19:33 ` [PATCH 07/18] PCI: pciehp: Enable Command Completed Interrupt " Marek Behún
2022-05-09  4:01   ` Lukas Wunner
2022-05-13 16:59     ` Pali Rohár
2022-02-20 19:33 ` [PATCH 08/18] PCI: aardvark: Add support for DLLSC and hotplug interrupt Marek Behún
2022-02-20 19:33 ` [PATCH 09/18] PCI: Add PCI_EXP_SLTCTL_ASPL_DISABLE macro Marek Behún
2022-02-20 19:33 ` [PATCH 10/18] PCI: Add function for parsing `slot-power-limit-milliwatt` DT property Marek Behún
2022-02-20 19:33 ` [PATCH 11/18] dt-bindings: PCI: aardvark: Describe slot-power-limit-milliwatt Marek Behún
2022-02-20 19:33 ` [PATCH 12/18] PCI: aardvark: Send Set_Slot_Power_Limit message Marek Behún
2022-02-20 19:33 ` [PATCH 13/18] arm64: dts: armada-3720-turris-mox: Define slot-power-limit-milliwatt for PCIe Marek Behún
2022-02-20 19:33 ` [PATCH 14/18] PCI: aardvark: Add clock support Marek Behún
2022-02-20 19:33 ` [PATCH 15/18] arm64: dts: marvell: armada-37xx: Add clock to PCIe node Marek Behún
2022-02-28 15:52   ` Gregory CLEMENT
2022-02-20 19:33 ` Marek Behún [this message]
2022-04-12 11:14   ` [PATCH 16/18] PCI: aardvark: Add suspend to RAM support Lorenzo Pieralisi
2022-02-20 19:33 ` [PATCH 17/18] PCI: aardvark: Run link training in separate worker Marek Behún
2022-04-12 15:25   ` Lorenzo Pieralisi
2022-04-12 17:55     ` Pali Rohár
2022-04-13  9:16       ` Lorenzo Pieralisi
2022-05-04 14:02         ` Marek Behún
2022-02-20 19:33 ` [PATCH 18/18] PCI: aardvark: Optimize PCIe card reset via GPIO Marek Behún
2022-04-11 15:36 ` [PATCH 00/18] PCI: aardvark controller changes BATCH 5 Lorenzo Pieralisi
2022-04-11 16:53   ` Pali Rohár
2022-05-13 10:33 ` Lorenzo Pieralisi
2022-05-13 16:48   ` Pali Rohár
2022-05-18 15:54 ` (subset) " Lorenzo Pieralisi
2022-08-16 16:25 ` Lorenzo Pieralisi
2022-08-18 13:56   ` Marek Behún

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220220193346.23789-17-kabel@kernel.org \
    --to=kabel@kernel.org \
    --cc=gregory.clement@bootlin.com \
    --cc=helgaas@kernel.org \
    --cc=kw@linux.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=lorenzo.pieralisi@arm.com \
    --cc=maz@kernel.org \
    --cc=miquel.raynal@bootlin.com \
    --cc=pali@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).