From: Bjorn Helgaas <helgaas@kernel.org>
To: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>,
Maxime Ripard <mripard@kernel.org>,
Thomas Zimmermann <tzimmermann@suse.de>
Cc: "David Airlie" <airlied@linux.ie>,
"Daniel Vetter" <daniel@ffwll.ch>,
"Xuefeng Li" <lixuefeng@loongson.cn>,
"Huacai Chen" <chenhuacai@loongson.cn>,
linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org,
dri-devel@lists.freedesktop.org,
"Bjorn Helgaas" <bhelgaas@google.com>,
"Bruno Prémont" <bonbons@linux-vserver.org>
Subject: [PATCH v9 03/11] PCI/VGA: Factor out vga_select_framebuffer_device()
Date: Thu, 24 Feb 2022 16:47:45 -0600 [thread overview]
Message-ID: <20220224224753.297579-4-helgaas@kernel.org> (raw)
In-Reply-To: <20220224224753.297579-1-helgaas@kernel.org>
From: Bjorn Helgaas <bhelgaas@google.com>
On x86 and ia64, if a VGA device BARs include a framebuffer reported by
platform firmware, we select the device as the default VGA device. Factor
this code to a separate function. No functional change intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Bruno Prémont <bonbons@linux-vserver.org>
---
drivers/pci/vgaarb.c | 99 ++++++++++++++++++++++++--------------------
1 file changed, 53 insertions(+), 46 deletions(-)
diff --git a/drivers/pci/vgaarb.c b/drivers/pci/vgaarb.c
index 6c57ffb77770..3f8fead49197 100644
--- a/drivers/pci/vgaarb.c
+++ b/drivers/pci/vgaarb.c
@@ -565,6 +565,58 @@ void vga_put(struct pci_dev *pdev, unsigned int rsrc)
}
EXPORT_SYMBOL(vga_put);
+static void __init vga_select_framebuffer_device(struct pci_dev *pdev)
+{
+#if defined(CONFIG_X86) || defined(CONFIG_IA64)
+ struct device *dev = &pdev->dev;
+ u64 base = screen_info.lfb_base;
+ u64 size = screen_info.lfb_size;
+ u64 limit;
+ resource_size_t start, end;
+ unsigned long flags;
+ int i;
+
+ /* Select the device owning the boot framebuffer if there is one */
+
+ if (screen_info.capabilities & VIDEO_CAPABILITY_64BIT_BASE)
+ base |= (u64)screen_info.ext_lfb_base << 32;
+
+ limit = base + size;
+
+ /*
+ * Override vga_arbiter_add_pci_device()'s I/O based detection
+ * as it may take the wrong device (e.g. on Apple system under
+ * EFI).
+ *
+ * Select the device owning the boot framebuffer if there is
+ * one.
+ */
+
+ /* Does firmware framebuffer belong to us? */
+ for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
+ flags = pci_resource_flags(pdev, i);
+
+ if ((flags & IORESOURCE_MEM) == 0)
+ continue;
+
+ start = pci_resource_start(pdev, i);
+ end = pci_resource_end(pdev, i);
+
+ if (!start || !end)
+ continue;
+
+ if (base < start || limit >= end)
+ continue;
+
+ if (!vga_default_device())
+ vgaarb_info(dev, "setting as boot device\n");
+ else if (pdev != vga_default_device())
+ vgaarb_info(dev, "overriding boot device\n");
+ vga_set_default_device(pdev);
+ }
+#endif
+}
+
static bool vga_arb_integrated_gpu(struct device *dev)
{
#if defined(CONFIG_ACPI)
@@ -1446,54 +1498,9 @@ static void __init vga_arb_select_default_device(void)
struct pci_dev *pdev, *found = NULL;
struct vga_device *vgadev;
-#if defined(CONFIG_X86) || defined(CONFIG_IA64)
- u64 base = screen_info.lfb_base;
- u64 size = screen_info.lfb_size;
- u64 limit;
- resource_size_t start, end;
- unsigned long flags;
- int i;
-
- if (screen_info.capabilities & VIDEO_CAPABILITY_64BIT_BASE)
- base |= (u64)screen_info.ext_lfb_base << 32;
-
- limit = base + size;
-
list_for_each_entry(vgadev, &vga_list, list) {
- struct device *dev = &vgadev->pdev->dev;
- /*
- * Override vga_arbiter_add_pci_device()'s I/O based detection
- * as it may take the wrong device (e.g. on Apple system under
- * EFI).
- *
- * Select the device owning the boot framebuffer if there is
- * one.
- */
-
- /* Does firmware framebuffer belong to us? */
- for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
- flags = pci_resource_flags(vgadev->pdev, i);
-
- if ((flags & IORESOURCE_MEM) == 0)
- continue;
-
- start = pci_resource_start(vgadev->pdev, i);
- end = pci_resource_end(vgadev->pdev, i);
-
- if (!start || !end)
- continue;
-
- if (base < start || limit >= end)
- continue;
-
- if (!vga_default_device())
- vgaarb_info(dev, "setting as boot device\n");
- else if (vgadev->pdev != vga_default_device())
- vgaarb_info(dev, "overriding boot device\n");
- vga_set_default_device(vgadev->pdev);
- }
+ vga_select_framebuffer_device(vgadev->pdev);
}
-#endif
if (!vga_default_device()) {
list_for_each_entry_reverse(vgadev, &vga_list, list) {
--
2.25.1
next prev parent reply other threads:[~2022-02-24 22:48 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-02-24 22:47 [PATCH v9 00/11] vgaarb: Rework default VGA device selection Bjorn Helgaas
2022-02-24 22:47 ` [PATCH v9 01/11] PCI/VGA: Move vgaarb to drivers/pci Bjorn Helgaas
2022-02-24 22:47 ` [PATCH v9 02/11] PCI/VGA: Move vga_arb_integrated_gpu() earlier in file Bjorn Helgaas
2022-02-24 22:47 ` Bjorn Helgaas [this message]
2022-02-24 22:47 ` [PATCH v9 04/11] PCI/VGA: Factor out default VGA device selection Bjorn Helgaas
2022-02-24 22:47 ` [PATCH v9 05/11] PCI/VGA: Move firmware default device detection to ADD_DEVICE path Bjorn Helgaas
2022-02-24 22:47 ` [PATCH v9 06/11] PCI/VGA: Move non-legacy VGA " Bjorn Helgaas
2022-02-24 22:47 ` [PATCH v9 07/11] PCI/VGA: Move disabled VGA device " Bjorn Helgaas
2022-02-24 22:47 ` [PATCH v9 08/11] PCI/VGA: Remove empty vga_arb_device_card_gone() Bjorn Helgaas
2022-02-24 22:47 ` [PATCH v9 09/11] PCI/VGA: Log bridge control messages when adding devices Bjorn Helgaas
2022-02-24 22:47 ` [PATCH v9 10/11] PCI/VGA: Use unsigned format string to print lock counts Bjorn Helgaas
2022-02-24 22:47 ` [PATCH v9 11/11] PCI/VGA: Replace full MIT license text with SPDX identifier Bjorn Helgaas
2022-02-25 22:15 ` [PATCH v9 00/11] vgaarb: Rework default VGA device selection Bjorn Helgaas
2022-03-09 16:29 ` Bjorn Helgaas
2022-03-10 3:56 ` Huacai Chen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220224224753.297579-4-helgaas@kernel.org \
--to=helgaas@kernel.org \
--cc=airlied@linux.ie \
--cc=bhelgaas@google.com \
--cc=bonbons@linux-vserver.org \
--cc=chenhuacai@loongson.cn \
--cc=daniel@ffwll.ch \
--cc=dri-devel@lists.freedesktop.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=lixuefeng@loongson.cn \
--cc=maarten.lankhorst@linux.intel.com \
--cc=mripard@kernel.org \
--cc=tzimmermann@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).