linux-pci.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
To: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Cc: "Jingoo Han" <jingoohan1@gmail.com>,
	"Gustavo Pimentel" <gustavo.pimentel@synopsys.com>,
	"Bjorn Helgaas" <bhelgaas@google.com>,
	"Lorenzo Pieralisi" <lorenzo.pieralisi@arm.com>,
	"Rob Herring" <robh@kernel.org>,
	"Krzysztof Wilczyński" <kw@linux.com>,
	"Serge Semin" <fancer.lancer@gmail.com>,
	"Alexey Malahov" <Alexey.Malahov@baikalelectronics.ru>,
	"Pavel Parkhomenko" <Pavel.Parkhomenko@baikalelectronics.ru>,
	"Frank Li" <Frank.Li@nxp.com>,
	linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH 02/12] PCI: dwc: Don't use generic IO-ops for DBI-space access
Date: Thu, 24 Mar 2022 13:57:46 +0530	[thread overview]
Message-ID: <20220324082746.GB2854@thinkpad> (raw)
In-Reply-To: <20220324012524.16784-3-Sergey.Semin@baikalelectronics.ru>

On Thu, Mar 24, 2022 at 04:25:13AM +0300, Serge Semin wrote:
> Commit c2b0c098fbd1 ("PCI: dwc: Use generic config accessors") replaced
> the locally defined DW PCIe host controller config-space accessors with
> the generic methods pci_generic_config_read() and
> pci_generic_config_write(). It was intended that the corresponding
> bus-mapping callback returned a correct virtual address of the passed PCI
> config-space register. The problem of the proposed solution was that it
> didn't take into account the way the host config-space is accessed on the
> DW PCIe. Depending on the DW PCIe IP-core synthesize parameters different
> interfaces can be used to access the host and peripheral config/memory
> spaces. The former one can be accessed via the DBI interface, while the
> later ones is reached via the AHB/AXI application bus. In case if the DW
> PCIe controller is configured to have a dedicated DBI interface, the way
> it is mapped into the IO-memory turns to be platform-specific. For such
> setups the DWC PCIe driver provides a set of the callbacks
> dw_pcie_ops.{read_dbi,write_dbi} so the platforms glue-drivers would be
> able to take into account the DBI bus IO peculiarities. Since
> commit c2b0c098fbd1 ("PCI: dwc: Use generic config accessors") these
> methods haven't been utilized during the generic host initialization
> performed by the PCIe subsystem code.
> 
> I don't really know how come there have been no problems spotted for the
> Histb/Exynos/Kirin PCIe controllers so far, but in our case with dword
> aligned IO requirement the generic config-space accessors can't be
> utilized for the host config-space. Thus in order to make sure the host
> config-space is properly accessed via the DBI bus let's get back the
> dw_pcie_rd_own_conf() and dw_pcie_wr_own_conf() methods. They are going to
> be just wrappers around the already defined
> dw_pcie_read_dbi()/dw_pcie_write_dbi() functions with proper arguments
> conversion. These methods perform the platform-specific config-space IO if
> the DBI accessors are specified, otherwise they call normal MMIO
> operations.
> 

Why can't you override the "pci_ops" in your host driver's "host_init"?

Thanks,
Mani

> Fixes: c2b0c098fbd1 ("PCI: dwc: Use generic config accessors")
> Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
> ---
>  .../pci/controller/dwc/pcie-designware-host.c | 34 +++++++++++++++++--
>  1 file changed, 32 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/pci/controller/dwc/pcie-designware-host.c b/drivers/pci/controller/dwc/pcie-designware-host.c
> index a03619a30c20..f89e6552139b 100644
> --- a/drivers/pci/controller/dwc/pcie-designware-host.c
> +++ b/drivers/pci/controller/dwc/pcie-designware-host.c
> @@ -528,10 +528,40 @@ void __iomem *dw_pcie_own_conf_map_bus(struct pci_bus *bus, unsigned int devfn,
>  }
>  EXPORT_SYMBOL_GPL(dw_pcie_own_conf_map_bus);
>  
> +static int dw_pcie_rd_own_conf(struct pci_bus *bus, unsigned int devfn,
> +			       int where, int size, u32 *val)
> +{
> +	struct pcie_port *pp = bus->sysdata;
> +	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
> +
> +	if (PCI_SLOT(devfn) > 0) {
> +		*val = ~0U;
> +		return PCIBIOS_DEVICE_NOT_FOUND;
> +	}
> +
> +	*val = dw_pcie_read_dbi(pci, where, size);
> +
> +	return PCIBIOS_SUCCESSFUL;
> +}
> +
> +static int dw_pcie_wr_own_conf(struct pci_bus *bus, unsigned int devfn,
> +			       int where, int size, u32 val)
> +{
> +	struct pcie_port *pp = bus->sysdata;
> +	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
> +
> +	if (PCI_SLOT(devfn) > 0)
> +		return PCIBIOS_DEVICE_NOT_FOUND;
> +
> +	dw_pcie_write_dbi(pci, where, size, val);
> +
> +	return PCIBIOS_SUCCESSFUL;
> +}
> +
>  static struct pci_ops dw_pcie_ops = {
>  	.map_bus = dw_pcie_own_conf_map_bus,
> -	.read = pci_generic_config_read,
> -	.write = pci_generic_config_write,
> +	.read = dw_pcie_rd_own_conf,
> +	.write = dw_pcie_wr_own_conf,
>  };
>  
>  void dw_pcie_setup_rc(struct pcie_port *pp)
> -- 
> 2.35.1
> 

  reply	other threads:[~2022-03-24  8:28 UTC|newest]

Thread overview: 29+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-03-24  1:25 [PATCH 00/12] PCI: dwc: Various fixes and cleanups Serge Semin
2022-03-24  1:25 ` [PATCH 01/12] PCI: dwc: Stop link in the host init error and de-initialization Serge Semin
2022-03-24  8:11   ` Manivannan Sadhasivam
2022-03-24  1:25 ` [PATCH 02/12] PCI: dwc: Don't use generic IO-ops for DBI-space access Serge Semin
2022-03-24  8:27   ` Manivannan Sadhasivam [this message]
2022-04-13 21:03     ` Serge Semin
2022-03-24  1:25 ` [PATCH 03/12] PCI: dwc: Add unroll iATU space support to the regions disable method Serge Semin
2022-03-24  8:59   ` Manivannan Sadhasivam
2022-03-28 21:34   ` kernel test robot
2022-03-28 21:34   ` kernel test robot
2022-03-24  1:25 ` [PATCH 04/12] PCI: dwc: Disable outbound windows for controllers with iATU Serge Semin
2022-03-24  9:05   ` Manivannan Sadhasivam
2022-03-24  1:25 ` [PATCH 05/12] PCI: dwc: Set INCREASE_REGION_SIZE flag based on limit address Serge Semin
2022-03-24 12:05   ` Manivannan Sadhasivam
2022-04-13 21:54     ` Serge Semin
2022-03-24  1:25 ` [PATCH 06/12] PCI: dwc: Add braces to the multi-line if-else statements Serge Semin
2022-03-24 12:13   ` Manivannan Sadhasivam
2022-03-24  1:25 ` [PATCH 07/12] PCI: dwc: Add trailing new-line literals to the log messages Serge Semin
2022-03-24 12:16   ` Manivannan Sadhasivam
2022-03-24  1:25 ` [PATCH 08/12] PCI: dwc: Discard IP-core version checking on unrolled iATU detection Serge Semin
2022-03-24 12:19   ` Manivannan Sadhasivam
2022-03-24  1:25 ` [PATCH 09/12] PCI: dwc: Convert Link-up status method to using dw_pcie_readl_dbi() Serge Semin
2022-03-24 12:20   ` Manivannan Sadhasivam
2022-03-24  1:25 ` [PATCH 10/12] PCI: dwc-plat: Simplify the probe method return value handling Serge Semin
2022-03-24 12:23   ` Manivannan Sadhasivam
2022-03-24  1:25 ` [PATCH 11/12] PCI: dwc-plat: Discard unused regmap pointer Serge Semin
2022-03-24 12:24   ` Manivannan Sadhasivam
2022-03-24  1:25 ` [PATCH 12/12] PCI: dwc-plat: Drop dw_plat_pcie_of_match forward declaration Serge Semin
2022-03-24 12:26   ` Manivannan Sadhasivam

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220324082746.GB2854@thinkpad \
    --to=manivannan.sadhasivam@linaro.org \
    --cc=Alexey.Malahov@baikalelectronics.ru \
    --cc=Frank.Li@nxp.com \
    --cc=Pavel.Parkhomenko@baikalelectronics.ru \
    --cc=Sergey.Semin@baikalelectronics.ru \
    --cc=bhelgaas@google.com \
    --cc=fancer.lancer@gmail.com \
    --cc=gustavo.pimentel@synopsys.com \
    --cc=jingoohan1@gmail.com \
    --cc=kw@linux.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=lorenzo.pieralisi@arm.com \
    --cc=robh@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).