From: Bharat Kumar Gogada <bharat.kumar.gogada@xilinx.com>
To: <linux-pci@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<devicetree@vger.kernel.org>
Cc: <lorenzo.pieralisi@arm.com>, <bhelgaas@google.com>,
<michals@xilinx.com>, <robh@kernel.org>,
Bharat Kumar Gogada <bharat.kumar.gogada@xilinx.com>
Subject: [PATCH v4 2/2] PCI: xilinx-cpm: Add support for Versal CPM5 Root Port
Date: Wed, 8 Jun 2022 22:10:46 +0530 [thread overview]
Message-ID: <20220608164046.3474-3-bharat.kumar.gogada@xilinx.com> (raw)
In-Reply-To: <20220608164046.3474-1-bharat.kumar.gogada@xilinx.com>
Xilinx Versal Premium series has CPM5 block which supports Root Port
functioning at Gen5 speed.
Xilinx Versal CPM5 has few changes with existing CPM block.
- CPM5 has dedicated register space for control and status registers.
- CPM5 legacy interrupt handling needs additional register bit
to enable and handle legacy interrupts.
Signed-off-by: Bharat Kumar Gogada <bharat.kumar.gogada@xilinx.com>
---
drivers/pci/controller/pcie-xilinx-cpm.c | 33 +++++++++++++++++++++++-
1 file changed, 32 insertions(+), 1 deletion(-)
diff --git a/drivers/pci/controller/pcie-xilinx-cpm.c b/drivers/pci/controller/pcie-xilinx-cpm.c
index c7cd44ed4dfc..a3b04083b6b3 100644
--- a/drivers/pci/controller/pcie-xilinx-cpm.c
+++ b/drivers/pci/controller/pcie-xilinx-cpm.c
@@ -35,6 +35,10 @@
#define XILINX_CPM_PCIE_MISC_IR_ENABLE 0x00000348
#define XILINX_CPM_PCIE_MISC_IR_LOCAL BIT(1)
+#define XILINX_CPM_PCIE_IR_STATUS 0x000002A0
+#define XILINX_CPM_PCIE_IR_ENABLE 0x000002A8
+#define XILINX_CPM_PCIE_IR_LOCAL BIT(0)
+
/* Interrupt registers definitions */
#define XILINX_CPM_PCIE_INTR_LINK_DOWN 0
#define XILINX_CPM_PCIE_INTR_HOT_RESET 3
@@ -109,6 +113,7 @@
* @intx_irq: legacy interrupt number
* @irq: Error interrupt number
* @lock: lock protecting shared register access
+ * @is_cpm5: value to check cpm version
*/
struct xilinx_cpm_pcie {
struct device *dev;
@@ -120,6 +125,7 @@ struct xilinx_cpm_pcie {
int intx_irq;
int irq;
raw_spinlock_t lock;
+ bool is_cpm5;
};
static u32 pcie_read(struct xilinx_cpm_pcie *port, u32 reg)
@@ -285,6 +291,14 @@ static void xilinx_cpm_pcie_event_flow(struct irq_desc *desc)
generic_handle_domain_irq(port->cpm_domain, i);
pcie_write(port, val, XILINX_CPM_PCIE_REG_IDR);
+ if (port->is_cpm5) {
+ val = readl_relaxed(port->cpm_base + XILINX_CPM_PCIE_IR_STATUS);
+ if (val)
+ writel_relaxed(val,
+ port->cpm_base +
+ XILINX_CPM_PCIE_IR_STATUS);
+ }
+
/*
* XILINX_CPM_PCIE_MISC_IR_STATUS register is mapped to
* CPM SLCR block.
@@ -484,6 +498,12 @@ static void xilinx_cpm_pcie_init_port(struct xilinx_cpm_pcie *port)
*/
writel(XILINX_CPM_PCIE_MISC_IR_LOCAL,
port->cpm_base + XILINX_CPM_PCIE_MISC_IR_ENABLE);
+
+ if (port->is_cpm5) {
+ writel(XILINX_CPM_PCIE_IR_LOCAL,
+ port->cpm_base + XILINX_CPM_PCIE_IR_ENABLE);
+ }
+
/* Enable the Bridge enable bit */
pcie_write(port, pcie_read(port, XILINX_CPM_PCIE_REG_RPSC) |
XILINX_CPM_PCIE_REG_RPSC_BEN,
@@ -504,6 +524,9 @@ static int xilinx_cpm_pcie_parse_dt(struct xilinx_cpm_pcie *port,
struct platform_device *pdev = to_platform_device(dev);
struct resource *res;
+ port->is_cpm5 = of_device_is_compatible(dev->of_node,
+ "xlnx,versal-cpm5-host");
+
port->cpm_base = devm_platform_ioremap_resource_byname(pdev,
"cpm_slcr");
if (IS_ERR(port->cpm_base))
@@ -518,7 +541,14 @@ static int xilinx_cpm_pcie_parse_dt(struct xilinx_cpm_pcie *port,
if (IS_ERR(port->cfg))
return PTR_ERR(port->cfg);
- port->reg_base = port->cfg->win;
+ if (port->is_cpm5) {
+ port->reg_base = devm_platform_ioremap_resource_byname(pdev,
+ "cpm_csr");
+ if (IS_ERR(port->reg_base))
+ return PTR_ERR(port->reg_base);
+ } else {
+ port->reg_base = port->cfg->win;
+ }
return 0;
}
@@ -593,6 +623,7 @@ static int xilinx_cpm_pcie_probe(struct platform_device *pdev)
static const struct of_device_id xilinx_cpm_pcie_of_match[] = {
{ .compatible = "xlnx,versal-cpm-host-1.00", },
+ { .compatible = "xlnx,versal-cpm5-host", },
{}
};
--
2.17.1
next prev parent reply other threads:[~2022-06-08 16:41 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-06-08 16:40 [PATCH v4 0/2] Add support for Xilinx Versal CPM5 Root Port Bharat Kumar Gogada
2022-06-08 16:40 ` [PATCH v4 1/2] dt-bindings: PCI: xilinx-cpm: Add " Bharat Kumar Gogada
2022-06-09 21:10 ` Rob Herring
2022-06-10 8:50 ` Bharat Kumar Gogada
2022-06-08 16:40 ` Bharat Kumar Gogada [this message]
2022-06-08 19:14 ` [PATCH v4 2/2] PCI: xilinx-cpm: Add support for " Bjorn Helgaas
2022-06-09 7:59 ` Michal Simek
2022-06-09 17:32 ` Bjorn Helgaas
2022-06-10 8:49 ` Bharat Kumar Gogada
2022-06-10 8:47 ` Bharat Kumar Gogada
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220608164046.3474-3-bharat.kumar.gogada@xilinx.com \
--to=bharat.kumar.gogada@xilinx.com \
--cc=bhelgaas@google.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=lorenzo.pieralisi@arm.com \
--cc=michals@xilinx.com \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).