[PATCH v25 00/15] PCI: dwc: rcar-gen4: Add R-Car Gen4 PCIe support

[PATCH v25 00/15] PCI: dwc: rcar-gen4: Add R-Car Gen4 PCIe support

[Yoshihiro Shimoda]

Add R-Car S4-8 (R-Car Gen4) PCIe controller for both host and endpoint modes.
To support them, modify PCIe DesignWare common codes.

Changes from v24:
https://lore.kernel.org/linux-pci/20231011071423.249458-1-yoshihiro.shimoda.uh@renesas.com/
 - Based on the latest pci.git / next branch.
 - Reordering the patches. (This is suggested by Bjorn.)
 - Drop "PCI: dwc: Disable two BARs to avoid unnecessary memory assignment"
   because break other platforms.
 - Modify the patch for the latest next branch in the patch 04/15.
 - Add specific-setting by using dbi2 again in the patch 12/15.
 - Modify commend of the specific-setting in the patch 12/15. Serge suggested
   this on v23 but I missed to modify this on v24.
 - Fix for -Wincompatible-function-pointer-types-strict  int the patch 13/15.

Changes from v23:
https://lore.kernel.org/linux-pci/20230926122431.3974714-1-yoshihiro.shimoda.uh@renesas.com/
 - Based on the latest pci.git / next branch.
 - Remove Link tag and Krzysztof's s-o-b tags from all patches.
 - Drop "PCI: dwc: Expose dw_pcie_write_dbi2() to module".
 - Add "PCI: dwc: Disable two BARs to avoid unnecessary memory assignment".
 - Add Reviewed-by in the patch 0[137]/16 and the patch 1[24]/16.
 - Fix typo in the patch 14/16.
 - Fix error messages and commit descriptions in the patch 1[234]/16.
 - Change the subjects in the patch 1[34]/16.
 - Use aplhabetical order on Kconfig in the patch 1[34]/16.
 - Drop DWC spec code in the patch 13/16. 

Changes from v22:
https://lore.kernel.org/linux-pci/20230925072130.3901087-1-yoshihiro.shimoda.uh@renesas.com/
 - Based on the latest pci.git / next branch.
 - Add Reviewed-by in the patch 12/16.
 - Move a few endpoint related code from the patch 13/16 to 14/16.
 - Change subjects in the patch 1[34]/16.
 - Modify the code for readability in the patch 14/16.

Yoshihiro Shimoda (15):
  PCI: Add T_PVPERL macro
  PCI: dwc: Add dw_pcie_link_set_max_link_width()
  PCI: dwc: Add missing PCI_EXP_LNKCAP_MLW handling
  PCI: tegra194: Drop PCI_EXP_LNKSTA_NLW setting
  PCI: dwc: endpoint: Add multiple PFs support for dbi2
  PCI: dwc: Add EDMA_UNROLL capability flag
  PCI: dwc: Expose dw_pcie_ep_exit() to module
  PCI: dwc: endpoint: Introduce .pre_init() and .deinit()
  dt-bindings: PCI: dwc: Update maxItems of reg and reg-names
  dt-bindings: PCI: renesas: Add R-Car Gen4 PCIe Host
  dt-bindings: PCI: renesas: Add R-Car Gen4 PCIe Endpoint
  PCI: rcar-gen4: Add R-Car Gen4 PCIe controller support for host mode
  PCI: rcar-gen4: Add endpoint mode support
  MAINTAINERS: Update PCI DRIVER FOR RENESAS R-CAR for R-Car Gen4
  misc: pci_endpoint_test: Add Device ID for R-Car S4-8 PCIe controller

 .../bindings/pci/rcar-gen4-pci-ep.yaml        | 115 ++++
 .../bindings/pci/rcar-gen4-pci-host.yaml      | 127 +++++
 .../bindings/pci/snps,dw-pcie-common.yaml     |   4 +-
 .../bindings/pci/snps,dw-pcie-ep.yaml         |   4 +-
 .../devicetree/bindings/pci/snps,dw-pcie.yaml |   4 +-
 MAINTAINERS                                   |   1 +
 drivers/misc/pci_endpoint_test.c              |   4 +
 drivers/pci/controller/dwc/Kconfig            |  25 +
 drivers/pci/controller/dwc/Makefile           |   1 +
 .../pci/controller/dwc/pcie-designware-ep.c   |  45 +-
 drivers/pci/controller/dwc/pcie-designware.c  | 101 ++--
 drivers/pci/controller/dwc/pcie-designware.h  |   8 +-
 drivers/pci/controller/dwc/pcie-rcar-gen4.c   | 527 ++++++++++++++++++
 drivers/pci/controller/dwc/pcie-tegra194.c    |   6 -
 drivers/pci/pci.h                             |   3 +
 15 files changed, 906 insertions(+), 69 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/pci/rcar-gen4-pci-ep.yaml
 create mode 100644 Documentation/devicetree/bindings/pci/rcar-gen4-pci-host.yaml
 create mode 100644 drivers/pci/controller/dwc/pcie-rcar-gen4.c

-- 
2.25.1

[PATCH v25 01/15] PCI: Add T_PVPERL macro

[Yoshihiro Shimoda]

According to the PCIe CEM r5.0, sec 2.9.2, Power stable to PERST#
inactive interval is 100 ms as minimum. Add a macro so that the PCIe
controller drivers can make use of it.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
---
 drivers/pci/pci.h | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
index 39a8932dc340..5ecbcf041179 100644
--- a/drivers/pci/pci.h
+++ b/drivers/pci/pci.h
@@ -13,6 +13,9 @@
 
 #define PCIE_LINK_RETRAIN_TIMEOUT_MS	1000
 
+/* Power stable to PERST# inactive from PCIe card Electromechanical Spec */
+#define PCIE_T_PVPERL_MS		100
+
 /*
  * PCIe r6.0, sec 5.3.3.2.1 <PME Synchronization>
  * Recommends 1ms to 10ms timeout to check L2 ready.
-- 
2.25.1

[PATCH v25 02/15] PCI: dwc: Add dw_pcie_link_set_max_link_width()

[Yoshihiro Shimoda]

This is a preparation before adding the Max-Link-width capability
setup which would in its turn complete the max-link-width setup
procedure defined by Synopsys in the HW-manual.

Seeing there is a max-link-speed setup method defined in the DW PCIe
core driver it would be good to have a similar function for the link
width setup.

That's why we need to define a dedicated function first from already
implemented but incomplete link-width setting up code.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
---
 drivers/pci/controller/dwc/pcie-designware.c | 86 ++++++++++----------
 1 file changed, 41 insertions(+), 45 deletions(-)

diff --git a/drivers/pci/controller/dwc/pcie-designware.c b/drivers/pci/controller/dwc/pcie-designware.c
index 1c1c7348972b..da4aba4aee62 100644
--- a/drivers/pci/controller/dwc/pcie-designware.c
+++ b/drivers/pci/controller/dwc/pcie-designware.c
@@ -732,6 +732,46 @@ static void dw_pcie_link_set_max_speed(struct dw_pcie *pci, u32 link_gen)
 
 }
 
+static void dw_pcie_link_set_max_link_width(struct dw_pcie *pci, u32 num_lanes)
+{
+	u32 lwsc, plc;
+
+	if (!num_lanes)
+		return;
+
+	/* Set the number of lanes */
+	plc = dw_pcie_readl_dbi(pci, PCIE_PORT_LINK_CONTROL);
+	plc &= ~PORT_LINK_FAST_LINK_MODE;
+	plc &= ~PORT_LINK_MODE_MASK;
+
+	/* Set link width speed control register */
+	lwsc = dw_pcie_readl_dbi(pci, PCIE_LINK_WIDTH_SPEED_CONTROL);
+	lwsc &= ~PORT_LOGIC_LINK_WIDTH_MASK;
+	switch (num_lanes) {
+	case 1:
+		plc |= PORT_LINK_MODE_1_LANES;
+		lwsc |= PORT_LOGIC_LINK_WIDTH_1_LANES;
+		break;
+	case 2:
+		plc |= PORT_LINK_MODE_2_LANES;
+		lwsc |= PORT_LOGIC_LINK_WIDTH_2_LANES;
+		break;
+	case 4:
+		plc |= PORT_LINK_MODE_4_LANES;
+		lwsc |= PORT_LOGIC_LINK_WIDTH_4_LANES;
+		break;
+	case 8:
+		plc |= PORT_LINK_MODE_8_LANES;
+		lwsc |= PORT_LOGIC_LINK_WIDTH_8_LANES;
+		break;
+	default:
+		dev_err(pci->dev, "num-lanes %u: invalid value\n", num_lanes);
+		return;
+	}
+	dw_pcie_writel_dbi(pci, PCIE_PORT_LINK_CONTROL, plc);
+	dw_pcie_writel_dbi(pci, PCIE_LINK_WIDTH_SPEED_CONTROL, lwsc);
+}
+
 void dw_pcie_iatu_detect(struct dw_pcie *pci)
 {
 	int max_region, ob, ib;
@@ -1013,49 +1053,5 @@ void dw_pcie_setup(struct dw_pcie *pci)
 	val |= PORT_LINK_DLL_LINK_EN;
 	dw_pcie_writel_dbi(pci, PCIE_PORT_LINK_CONTROL, val);
 
-	if (!pci->num_lanes) {
-		dev_dbg(pci->dev, "Using h/w default number of lanes\n");
-		return;
-	}
-
-	/* Set the number of lanes */
-	val &= ~PORT_LINK_FAST_LINK_MODE;
-	val &= ~PORT_LINK_MODE_MASK;
-	switch (pci->num_lanes) {
-	case 1:
-		val |= PORT_LINK_MODE_1_LANES;
-		break;
-	case 2:
-		val |= PORT_LINK_MODE_2_LANES;
-		break;
-	case 4:
-		val |= PORT_LINK_MODE_4_LANES;
-		break;
-	case 8:
-		val |= PORT_LINK_MODE_8_LANES;
-		break;
-	default:
-		dev_err(pci->dev, "num-lanes %u: invalid value\n", pci->num_lanes);
-		return;
-	}
-	dw_pcie_writel_dbi(pci, PCIE_PORT_LINK_CONTROL, val);
-
-	/* Set link width speed control register */
-	val = dw_pcie_readl_dbi(pci, PCIE_LINK_WIDTH_SPEED_CONTROL);
-	val &= ~PORT_LOGIC_LINK_WIDTH_MASK;
-	switch (pci->num_lanes) {
-	case 1:
-		val |= PORT_LOGIC_LINK_WIDTH_1_LANES;
-		break;
-	case 2:
-		val |= PORT_LOGIC_LINK_WIDTH_2_LANES;
-		break;
-	case 4:
-		val |= PORT_LOGIC_LINK_WIDTH_4_LANES;
-		break;
-	case 8:
-		val |= PORT_LOGIC_LINK_WIDTH_8_LANES;
-		break;
-	}
-	dw_pcie_writel_dbi(pci, PCIE_LINK_WIDTH_SPEED_CONTROL, val);
+	dw_pcie_link_set_max_link_width(pci, pci->num_lanes);
 }
-- 
2.25.1

[PATCH v25 03/15] PCI: dwc: Add missing PCI_EXP_LNKCAP_MLW handling

[Yoshihiro Shimoda]

Update dw_pcie_link_set_max_link_width() to set PCI_EXP_LNKCAP_MLW.

In accordance with the DW PCIe RC/EP HW manuals [1,2,3,...] aside with
the PORT_LINK_CTRL_OFF.LINK_CAPABLE and GEN2_CTRL_OFF.NUM_OF_LANES[8:0]
field there is another one which needs to be updated.

It's LINK_CAPABILITIES_REG.PCIE_CAP_MAX_LINK_WIDTH. If it isn't done at
the very least the maximum link-width capability CSR won't expose the
actual maximum capability.

[1] DesignWare Cores PCI Express Controller Databook - DWC PCIe Root Port,
    Version 4.60a, March 2015, p.1032
[2] DesignWare Cores PCI Express Controller Databook - DWC PCIe Root Port,
    Version 4.70a, March 2016, p.1065
[3] DesignWare Cores PCI Express Controller Databook - DWC PCIe Root Port,
    Version 4.90a, March 2016, p.1057
...
[X] DesignWare Cores PCI Express Controller Databook - DWC PCIe Endpoint,
      Version 5.40a, March 2019, p.1396
[X+1] DesignWare Cores PCI Express Controller Databook - DWC PCIe Root Port,
      Version 5.40a, March 2019, p.1266

Suggested-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
---
 drivers/pci/controller/dwc/pcie-designware.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/drivers/pci/controller/dwc/pcie-designware.c b/drivers/pci/controller/dwc/pcie-designware.c
index da4aba4aee62..2b60d20dfdf5 100644
--- a/drivers/pci/controller/dwc/pcie-designware.c
+++ b/drivers/pci/controller/dwc/pcie-designware.c
@@ -734,7 +734,8 @@ static void dw_pcie_link_set_max_speed(struct dw_pcie *pci, u32 link_gen)
 
 static void dw_pcie_link_set_max_link_width(struct dw_pcie *pci, u32 num_lanes)
 {
-	u32 lwsc, plc;
+	u32 lnkcap, lwsc, plc;
+	u8 cap;
 
 	if (!num_lanes)
 		return;
@@ -770,6 +771,12 @@ static void dw_pcie_link_set_max_link_width(struct dw_pcie *pci, u32 num_lanes)
 	}
 	dw_pcie_writel_dbi(pci, PCIE_PORT_LINK_CONTROL, plc);
 	dw_pcie_writel_dbi(pci, PCIE_LINK_WIDTH_SPEED_CONTROL, lwsc);
+
+	cap = dw_pcie_find_capability(pci, PCI_CAP_ID_EXP);
+	lnkcap = dw_pcie_readl_dbi(pci, cap + PCI_EXP_LNKCAP);
+	lnkcap &= ~PCI_EXP_LNKCAP_MLW;
+	lnkcap |= FIELD_PREP(PCI_EXP_LNKCAP_MLW, num_lanes);
+	dw_pcie_writel_dbi(pci, cap + PCI_EXP_LNKCAP, lnkcap);
 }
 
 void dw_pcie_iatu_detect(struct dw_pcie *pci)
-- 
2.25.1

[PATCH v25 04/15] PCI: tegra194: Drop PCI_EXP_LNKSTA_NLW setting

[Yoshihiro Shimoda]

dw_pcie_setup() is already setting PCI_EXP_LNKCAP_MLW to pcie->num_lanes
in the PCI_EXP_LNKCAP register for programming maximum link width.

Hence, remove the redundant setting here.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Jonathan Hunter <jonathanh@nvidia.com>
---
 drivers/pci/controller/dwc/pcie-tegra194.c | 6 ------
 1 file changed, 6 deletions(-)

diff --git a/drivers/pci/controller/dwc/pcie-tegra194.c b/drivers/pci/controller/dwc/pcie-tegra194.c
index a962f2c7794f..e1fe574ce765 100644
--- a/drivers/pci/controller/dwc/pcie-tegra194.c
+++ b/drivers/pci/controller/dwc/pcie-tegra194.c
@@ -916,12 +916,6 @@ static int tegra_pcie_dw_host_init(struct dw_pcie_rp *pp)
 		AMBA_ERROR_RESPONSE_CRS_SHIFT);
 	dw_pcie_writel_dbi(pci, PORT_LOGIC_AMBA_ERROR_RESPONSE_DEFAULT, val);
 
-	/* Configure Max lane width from DT */
-	val = dw_pcie_readl_dbi(pci, pcie->pcie_cap_base + PCI_EXP_LNKCAP);
-	val &= ~PCI_EXP_LNKCAP_MLW;
-	val |= FIELD_PREP(PCI_EXP_LNKCAP_MLW, pcie->num_lanes);
-	dw_pcie_writel_dbi(pci, pcie->pcie_cap_base + PCI_EXP_LNKCAP, val);
-
 	/* Clear Slot Clock Configuration bit if SRNS configuration */
 	if (pcie->enable_srns) {
 		val_16 = dw_pcie_readw_dbi(pci, pcie->pcie_cap_base +
-- 
2.25.1

[PATCH v25 05/15] PCI: dwc: endpoint: Add multiple PFs support for dbi2

[Yoshihiro Shimoda]

The commit 24ede430fa49 ("PCI: designware-ep: Add multiple PFs support
for DWC") added .func_conf_select() to get the configuration space of
different PFs and assumed that the offsets between dbi and dbi2 would
be the same.

However, Renesas R-Car Gen4 PCIe controllers have different offsets of
function 1: dbi (+0x1000) and dbi2 (+0x800). To get the offset for dbi2,
add .get_dbi2_offset() and dw_pcie_ep_get_dbi2_offset().

Note:
 - .func_conf_select() should be renamed later.
 - dw_pcie_ep_get_dbi2_offset() will call .func_conf_select()
   if .get_dbi2_offset() doesn't exist for backward compatibility.
 - dw_pcie_writeX_{dbi/dbi2} APIs accepted the func_no argument,
   so that these offset calculations are contained in the API
   definitions itself as it should.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
---
 .../pci/controller/dwc/pcie-designware-ep.c   | 32 ++++++++++++++-----
 drivers/pci/controller/dwc/pcie-designware.h  |  1 +
 2 files changed, 25 insertions(+), 8 deletions(-)

diff --git a/drivers/pci/controller/dwc/pcie-designware-ep.c b/drivers/pci/controller/dwc/pcie-designware-ep.c
index f9182f8d552f..851538ddec0a 100644
--- a/drivers/pci/controller/dwc/pcie-designware-ep.c
+++ b/drivers/pci/controller/dwc/pcie-designware-ep.c
@@ -52,21 +52,35 @@ static unsigned int dw_pcie_ep_func_select(struct dw_pcie_ep *ep, u8 func_no)
 	return func_offset;
 }
 
+static unsigned int dw_pcie_ep_get_dbi2_offset(struct dw_pcie_ep *ep, u8 func_no)
+{
+	unsigned int dbi2_offset = 0;
+
+	if (ep->ops->get_dbi2_offset)
+		dbi2_offset = ep->ops->get_dbi2_offset(ep, func_no);
+	else if (ep->ops->func_conf_select)     /* for backward compatibility */
+		dbi2_offset = ep->ops->func_conf_select(ep, func_no);
+
+	return dbi2_offset;
+}
+
 static void __dw_pcie_ep_reset_bar(struct dw_pcie *pci, u8 func_no,
 				   enum pci_barno bar, int flags)
 {
-	u32 reg;
-	unsigned int func_offset = 0;
+	unsigned int func_offset, dbi2_offset;
 	struct dw_pcie_ep *ep = &pci->ep;
+	u32 reg, reg_dbi2;
 
 	func_offset = dw_pcie_ep_func_select(ep, func_no);
+	dbi2_offset = dw_pcie_ep_get_dbi2_offset(ep, func_no);
 
 	reg = func_offset + PCI_BASE_ADDRESS_0 + (4 * bar);
+	reg_dbi2 = dbi2_offset + PCI_BASE_ADDRESS_0 + (4 * bar);
 	dw_pcie_dbi_ro_wr_en(pci);
-	dw_pcie_writel_dbi2(pci, reg, 0x0);
+	dw_pcie_writel_dbi2(pci, reg_dbi2, 0x0);
 	dw_pcie_writel_dbi(pci, reg, 0x0);
 	if (flags & PCI_BASE_ADDRESS_MEM_TYPE_64) {
-		dw_pcie_writel_dbi2(pci, reg + 4, 0x0);
+		dw_pcie_writel_dbi2(pci, reg_dbi2 + 4, 0x0);
 		dw_pcie_writel_dbi(pci, reg + 4, 0x0);
 	}
 	dw_pcie_dbi_ro_wr_dis(pci);
@@ -228,16 +242,18 @@ static int dw_pcie_ep_set_bar(struct pci_epc *epc, u8 func_no, u8 vfunc_no,
 {
 	struct dw_pcie_ep *ep = epc_get_drvdata(epc);
 	struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
+	unsigned int func_offset, dbi2_offset;
 	enum pci_barno bar = epf_bar->barno;
 	size_t size = epf_bar->size;
 	int flags = epf_bar->flags;
-	unsigned int func_offset = 0;
+	u32 reg, reg_dbi2;
 	int ret, type;
-	u32 reg;
 
 	func_offset = dw_pcie_ep_func_select(ep, func_no);
+	dbi2_offset = dw_pcie_ep_get_dbi2_offset(ep, func_no);
 
 	reg = PCI_BASE_ADDRESS_0 + (4 * bar) + func_offset;
+	reg_dbi2 = PCI_BASE_ADDRESS_0 + (4 * bar) + dbi2_offset;
 
 	if (!(flags & PCI_BASE_ADDRESS_SPACE))
 		type = PCIE_ATU_TYPE_MEM;
@@ -253,11 +269,11 @@ static int dw_pcie_ep_set_bar(struct pci_epc *epc, u8 func_no, u8 vfunc_no,
 
 	dw_pcie_dbi_ro_wr_en(pci);
 
-	dw_pcie_writel_dbi2(pci, reg, lower_32_bits(size - 1));
+	dw_pcie_writel_dbi2(pci, reg_dbi2, lower_32_bits(size - 1));
 	dw_pcie_writel_dbi(pci, reg, flags);
 
 	if (flags & PCI_BASE_ADDRESS_MEM_TYPE_64) {
-		dw_pcie_writel_dbi2(pci, reg + 4, upper_32_bits(size - 1));
+		dw_pcie_writel_dbi2(pci, reg_dbi2 + 4, upper_32_bits(size - 1));
 		dw_pcie_writel_dbi(pci, reg + 4, 0);
 	}
 
diff --git a/drivers/pci/controller/dwc/pcie-designware.h b/drivers/pci/controller/dwc/pcie-designware.h
index efb4d4754fc8..373358dee447 100644
--- a/drivers/pci/controller/dwc/pcie-designware.h
+++ b/drivers/pci/controller/dwc/pcie-designware.h
@@ -342,6 +342,7 @@ struct dw_pcie_ep_ops {
 	 * driver.
 	 */
 	unsigned int (*func_conf_select)(struct dw_pcie_ep *ep, u8 func_no);
+	unsigned int (*get_dbi2_offset)(struct dw_pcie_ep *ep, u8 func_no);
 };
 
 struct dw_pcie_ep_func {
-- 
2.25.1

[PATCH v25 06/15] PCI: dwc: Add EDMA_UNROLL capability flag

[Yoshihiro Shimoda]

Renesas R-Car Gen4 PCIe controllers have an unexpected register value in
the eDMA CTRL register.

So, add a new capability flag "EDMA_UNROLL" which would force the unrolled
eDMA mapping for the problematic device.

Suggested-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
---
 drivers/pci/controller/dwc/pcie-designware.c | 8 +++++++-
 drivers/pci/controller/dwc/pcie-designware.h | 5 +++--
 2 files changed, 10 insertions(+), 3 deletions(-)

diff --git a/drivers/pci/controller/dwc/pcie-designware.c b/drivers/pci/controller/dwc/pcie-designware.c
index 2b60d20dfdf5..1f900be94556 100644
--- a/drivers/pci/controller/dwc/pcie-designware.c
+++ b/drivers/pci/controller/dwc/pcie-designware.c
@@ -887,8 +887,14 @@ static int dw_pcie_edma_find_chip(struct dw_pcie *pci)
 	 * Indirect eDMA CSRs access has been completely removed since v5.40a
 	 * thus no space is now reserved for the eDMA channels viewport and
 	 * former DMA CTRL register is no longer fixed to FFs.
+	 *
+	 * Note that Renesas R-Car S4-8's PCIe controllers for unknown reason
+	 * have zeros in the eDMA CTRL register even though the HW-manual
+	 * explicitly states there must FFs if the unrolled mapping is enabled.
+	 * For such cases the low-level drivers are supposed to manually
+	 * activate the unrolled mapping to bypass the auto-detection procedure.
 	 */
-	if (dw_pcie_ver_is_ge(pci, 540A))
+	if (dw_pcie_ver_is_ge(pci, 540A) || dw_pcie_cap_is(pci, EDMA_UNROLL))
 		val = 0xFFFFFFFF;
 	else
 		val = dw_pcie_readl_dbi(pci, PCIE_DMA_VIEWPORT_BASE + PCIE_DMA_CTRL);
diff --git a/drivers/pci/controller/dwc/pcie-designware.h b/drivers/pci/controller/dwc/pcie-designware.h
index 373358dee447..85522256a8e5 100644
--- a/drivers/pci/controller/dwc/pcie-designware.h
+++ b/drivers/pci/controller/dwc/pcie-designware.h
@@ -51,8 +51,9 @@
 
 /* DWC PCIe controller capabilities */
 #define DW_PCIE_CAP_REQ_RES		0
-#define DW_PCIE_CAP_IATU_UNROLL		1
-#define DW_PCIE_CAP_CDM_CHECK		2
+#define DW_PCIE_CAP_EDMA_UNROLL		1
+#define DW_PCIE_CAP_IATU_UNROLL		2
+#define DW_PCIE_CAP_CDM_CHECK		3
 
 #define dw_pcie_cap_is(_pci, _cap) \
 	test_bit(DW_PCIE_CAP_ ## _cap, &(_pci)->caps)
-- 
2.25.1

[PATCH v25 07/15] PCI: dwc: Expose dw_pcie_ep_exit() to module

[Yoshihiro Shimoda]

Since no PCIe controller drivers call this, this change is not required
for now. But, Renesas R-Car Gen4 PCIe controller driver will call this
and if the controller driver is built as a kernel module, the following
build error happens:

  ERROR: modpost: "dw_pcie_ep_exit" [drivers/pci/controller/dwc/pcie-rcar-gen4-ep-drv.ko] undefined!

So, expose dw_pcie_ep_exit() for it.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
---
 drivers/pci/controller/dwc/pcie-designware-ep.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/pci/controller/dwc/pcie-designware-ep.c b/drivers/pci/controller/dwc/pcie-designware-ep.c
index 851538ddec0a..a8bcbc57ef86 100644
--- a/drivers/pci/controller/dwc/pcie-designware-ep.c
+++ b/drivers/pci/controller/dwc/pcie-designware-ep.c
@@ -638,6 +638,7 @@ void dw_pcie_ep_exit(struct dw_pcie_ep *ep)
 
 	pci_epc_mem_exit(epc);
 }
+EXPORT_SYMBOL_GPL(dw_pcie_ep_exit);
 
 static unsigned int dw_pcie_ep_find_ext_capability(struct dw_pcie *pci, int cap)
 {
-- 
2.25.1

[PATCH v25 08/15] PCI: dwc: endpoint: Introduce .pre_init() and .deinit()

[Yoshihiro Shimoda]

Renesas R-Car Gen4 PCIe controllers require vendor-specific
initialization before .init().

To use dw->dbi and dw->num-lanes in the initialization code,
introduce .pre_init() into struct dw_pcie_ep_ops. While at it,
also introduce .deinit() to disable the controller by using
vendor-specific de-initialization.

Note that the ep_init in the struct dw_pcie_ep_ops should be
renamed to init later.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
---
 drivers/pci/controller/dwc/pcie-designware-ep.c | 12 +++++++++++-
 drivers/pci/controller/dwc/pcie-designware.h    |  2 ++
 2 files changed, 13 insertions(+), 1 deletion(-)

diff --git a/drivers/pci/controller/dwc/pcie-designware-ep.c b/drivers/pci/controller/dwc/pcie-designware-ep.c
index a8bcbc57ef86..d34a5e87ad18 100644
--- a/drivers/pci/controller/dwc/pcie-designware-ep.c
+++ b/drivers/pci/controller/dwc/pcie-designware-ep.c
@@ -637,6 +637,9 @@ void dw_pcie_ep_exit(struct dw_pcie_ep *ep)
 			      epc->mem->window.page_size);
 
 	pci_epc_mem_exit(epc);
+
+	if (ep->ops->deinit)
+		ep->ops->deinit(ep);
 }
 EXPORT_SYMBOL_GPL(dw_pcie_ep_exit);
 
@@ -740,6 +743,9 @@ int dw_pcie_ep_init(struct dw_pcie_ep *ep)
 	ep->phys_base = res->start;
 	ep->addr_size = resource_size(res);
 
+	if (ep->ops->pre_init)
+		ep->ops->pre_init(ep);
+
 	dw_pcie_version_detect(pci);
 
 	dw_pcie_iatu_detect(pci);
@@ -794,7 +800,7 @@ int dw_pcie_ep_init(struct dw_pcie_ep *ep)
 			       ep->page_size);
 	if (ret < 0) {
 		dev_err(dev, "Failed to initialize address space\n");
-		return ret;
+		goto err_ep_deinit;
 	}
 
 	ep->msi_mem = pci_epc_mem_alloc_addr(epc, &ep->msi_mem_phys,
@@ -831,6 +837,10 @@ int dw_pcie_ep_init(struct dw_pcie_ep *ep)
 err_exit_epc_mem:
 	pci_epc_mem_exit(epc);
 
+err_ep_deinit:
+	if (ep->ops->deinit)
+		ep->ops->deinit(ep);
+
 	return ret;
 }
 EXPORT_SYMBOL_GPL(dw_pcie_ep_init);
diff --git a/drivers/pci/controller/dwc/pcie-designware.h b/drivers/pci/controller/dwc/pcie-designware.h
index 85522256a8e5..55ff76e3d384 100644
--- a/drivers/pci/controller/dwc/pcie-designware.h
+++ b/drivers/pci/controller/dwc/pcie-designware.h
@@ -331,7 +331,9 @@ struct dw_pcie_rp {
 };
 
 struct dw_pcie_ep_ops {
+	void	(*pre_init)(struct dw_pcie_ep *ep);
 	void	(*ep_init)(struct dw_pcie_ep *ep);
+	void	(*deinit)(struct dw_pcie_ep *ep);
 	int	(*raise_irq)(struct dw_pcie_ep *ep, u8 func_no,
 			     enum pci_epc_irq_type type, u16 interrupt_num);
 	const struct pci_epc_features* (*get_features)(struct dw_pcie_ep *ep);
-- 
2.25.1

[PATCH v25 09/15] dt-bindings: PCI: dwc: Update maxItems of reg and reg-names

[Yoshihiro Shimoda]

Update maxItems of reg and reg-names on both host and endpoint
for supporting Renesas R-Car Gen4 PCIe controllers later.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
---
 .../devicetree/bindings/pci/snps,dw-pcie-common.yaml          | 4 ++--
 Documentation/devicetree/bindings/pci/snps,dw-pcie-ep.yaml    | 4 ++--
 Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml       | 4 ++--
 3 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/Documentation/devicetree/bindings/pci/snps,dw-pcie-common.yaml b/Documentation/devicetree/bindings/pci/snps,dw-pcie-common.yaml
index d87e13496834..dc05761c5cf9 100644
--- a/Documentation/devicetree/bindings/pci/snps,dw-pcie-common.yaml
+++ b/Documentation/devicetree/bindings/pci/snps,dw-pcie-common.yaml
@@ -33,11 +33,11 @@ properties:
       specific for each activated function, while the rest of the sub-spaces
       are common for all of them (if there are more than one).
     minItems: 2
-    maxItems: 6
+    maxItems: 7
 
   reg-names:
     minItems: 2
-    maxItems: 6
+    maxItems: 7
 
   interrupts:
     description:
diff --git a/Documentation/devicetree/bindings/pci/snps,dw-pcie-ep.yaml b/Documentation/devicetree/bindings/pci/snps,dw-pcie-ep.yaml
index 8fc2151691a4..bbdb01d22848 100644
--- a/Documentation/devicetree/bindings/pci/snps,dw-pcie-ep.yaml
+++ b/Documentation/devicetree/bindings/pci/snps,dw-pcie-ep.yaml
@@ -33,11 +33,11 @@ properties:
       normal controller functioning. iATU memory IO region is also required
       if the space is unrolled (IP-core version >= 4.80a).
     minItems: 2
-    maxItems: 5
+    maxItems: 7
 
   reg-names:
     minItems: 2
-    maxItems: 5
+    maxItems: 7
     items:
       oneOf:
         - description:
diff --git a/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml b/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml
index 8bbdeb8821f8..022055edbf9e 100644
--- a/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml
+++ b/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml
@@ -42,11 +42,11 @@ properties:
       are required for the normal controller work. iATU memory IO region is
       also required if the space is unrolled (IP-core version >= 4.80a).
     minItems: 2
-    maxItems: 5
+    maxItems: 7
 
   reg-names:
     minItems: 2
-    maxItems: 5
+    maxItems: 7
     items:
       oneOf:
         - description:
-- 
2.25.1

[PATCH v25 10/15] dt-bindings: PCI: renesas: Add R-Car Gen4 PCIe Host

[Yoshihiro Shimoda]

Document bindings for Renesas R-Car Gen4 and R-Car S4-8 (R8A779F0)
PCIe host module.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
---
 .../bindings/pci/rcar-gen4-pci-host.yaml      | 127 ++++++++++++++++++
 1 file changed, 127 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pci/rcar-gen4-pci-host.yaml

diff --git a/Documentation/devicetree/bindings/pci/rcar-gen4-pci-host.yaml b/Documentation/devicetree/bindings/pci/rcar-gen4-pci-host.yaml
new file mode 100644
index 000000000000..ffb34339b637
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/rcar-gen4-pci-host.yaml
@@ -0,0 +1,127 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2022-2023 Renesas Electronics Corp.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/rcar-gen4-pci-host.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas R-Car Gen4 PCIe Host
+
+maintainers:
+  - Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
+
+allOf:
+  - $ref: snps,dw-pcie.yaml#
+
+properties:
+  compatible:
+    items:
+      - const: renesas,r8a779f0-pcie   # R-Car S4-8
+      - const: renesas,rcar-gen4-pcie  # R-Car Gen4
+
+  reg:
+    maxItems: 7
+
+  reg-names:
+    items:
+      - const: dbi
+      - const: dbi2
+      - const: atu
+      - const: dma
+      - const: app
+      - const: phy
+      - const: config
+
+  interrupts:
+    maxItems: 4
+
+  interrupt-names:
+    items:
+      - const: msi
+      - const: dma
+      - const: sft_ce
+      - const: app
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: core
+      - const: ref
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    items:
+      - const: pwr
+
+  max-link-speed:
+    maximum: 4
+
+  num-lanes:
+    maximum: 4
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+  - interrupt-names
+  - clocks
+  - clock-names
+  - power-domains
+  - resets
+  - reset-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r8a779f0-cpg-mssr.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/r8a779f0-sysc.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        pcie: pcie@e65d0000 {
+            compatible = "renesas,r8a779f0-pcie", "renesas,rcar-gen4-pcie";
+            reg = <0 0xe65d0000 0 0x1000>, <0 0xe65d2000 0 0x0800>,
+                  <0 0xe65d3000 0 0x2000>, <0 0xe65d5000 0 0x1200>,
+                  <0 0xe65d6200 0 0x0e00>, <0 0xe65d7000 0 0x0400>,
+                  <0 0xfe000000 0 0x400000>;
+            reg-names = "dbi", "dbi2", "atu", "dma", "app", "phy", "config";
+            interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "msi", "dma", "sft_ce", "app";
+            clocks = <&cpg CPG_MOD 624>, <&pcie0_clkref>;
+            clock-names = "core", "ref";
+            power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
+            resets = <&cpg 624>;
+            reset-names = "pwr";
+            max-link-speed = <4>;
+            num-lanes = <2>;
+            #address-cells = <3>;
+            #size-cells = <2>;
+            bus-range = <0x00 0xff>;
+            device_type = "pci";
+            ranges = <0x01000000 0 0x00000000 0 0xfe000000 0 0x00400000>,
+                     <0x02000000 0 0x30000000 0 0x30000000 0 0x10000000>;
+            dma-ranges = <0x42000000 0 0x00000000 0 0x00000000 1 0x00000000>;
+            #interrupt-cells = <1>;
+            interrupt-map-mask = <0 0 0 7>;
+            interrupt-map = <0 0 0 1 &gic GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
+                            <0 0 0 2 &gic GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
+                            <0 0 0 3 &gic GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
+                            <0 0 0 4 &gic GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>;
+            snps,enable-cdm-check;
+        };
+    };
-- 
2.25.1

[PATCH v25 11/15] dt-bindings: PCI: renesas: Add R-Car Gen4 PCIe Endpoint

[Yoshihiro Shimoda]

Document bindings for Renesas R-Car Gen4 and R-Car S4-8 (R8A779F0)
PCIe endpoint module.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
---
 .../bindings/pci/rcar-gen4-pci-ep.yaml        | 115 ++++++++++++++++++
 1 file changed, 115 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pci/rcar-gen4-pci-ep.yaml

diff --git a/Documentation/devicetree/bindings/pci/rcar-gen4-pci-ep.yaml b/Documentation/devicetree/bindings/pci/rcar-gen4-pci-ep.yaml
new file mode 100644
index 000000000000..fe38f62da066
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/rcar-gen4-pci-ep.yaml
@@ -0,0 +1,115 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2022-2023 Renesas Electronics Corp.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/rcar-gen4-pci-ep.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas R-Car Gen4 PCIe Endpoint
+
+maintainers:
+  - Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
+
+allOf:
+  - $ref: snps,dw-pcie-ep.yaml#
+
+properties:
+  compatible:
+    items:
+      - const: renesas,r8a779f0-pcie-ep   # R-Car S4-8
+      - const: renesas,rcar-gen4-pcie-ep  # R-Car Gen4
+
+  reg:
+    maxItems: 7
+
+  reg-names:
+    items:
+      - const: dbi
+      - const: dbi2
+      - const: atu
+      - const: dma
+      - const: app
+      - const: phy
+      - const: addr_space
+
+  interrupts:
+    maxItems: 3
+
+  interrupt-names:
+    items:
+      - const: dma
+      - const: sft_ce
+      - const: app
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: core
+      - const: ref
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    items:
+      - const: pwr
+
+  max-link-speed:
+    maximum: 4
+
+  num-lanes:
+    maximum: 4
+
+  max-functions:
+    maximum: 2
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+  - interrupt-names
+  - clocks
+  - clock-names
+  - power-domains
+  - resets
+  - reset-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r8a779f0-cpg-mssr.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/r8a779f0-sysc.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        pcie0_ep: pcie-ep@e65d0000 {
+            compatible = "renesas,r8a779f0-pcie-ep", "renesas,rcar-gen4-pcie-ep";
+            reg = <0 0xe65d0000 0 0x2000>, <0 0xe65d2000 0 0x1000>,
+                  <0 0xe65d3000 0 0x2000>, <0 0xe65d5000 0 0x1200>,
+                  <0 0xe65d6200 0 0x0e00>, <0 0xe65d7000 0 0x0400>,
+                  <0 0xfe000000 0 0x400000>;
+            reg-names = "dbi", "dbi2", "atu", "dma", "app", "phy", "addr_space";
+            interrupts = <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "dma", "sft_ce", "app";
+            clocks = <&cpg CPG_MOD 624>, <&pcie0_clkref>;
+            clock-names = "core", "ref";
+            power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
+            resets = <&cpg 624>;
+            reset-names = "pwr";
+            max-link-speed = <4>;
+            num-lanes = <2>;
+            max-functions = /bits/ 8 <2>;
+        };
+    };
-- 
2.25.1

[PATCH v25 12/15] PCI: rcar-gen4: Add R-Car Gen4 PCIe controller support for host mode

[Yoshihiro Shimoda]

Add R-Car Gen4 PCIe controller support for host mode.

This controller is based on Synopsys DesignWare PCIe. However, this
particular controller has a number of vendor-specific registers, and as
such, requires initialization code like mode setting and retraining and
so on.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
---
 drivers/pci/controller/dwc/Kconfig          |  14 +
 drivers/pci/controller/dwc/Makefile         |   1 +
 drivers/pci/controller/dwc/pcie-rcar-gen4.c | 378 ++++++++++++++++++++
 3 files changed, 393 insertions(+)
 create mode 100644 drivers/pci/controller/dwc/pcie-rcar-gen4.c

diff --git a/drivers/pci/controller/dwc/Kconfig b/drivers/pci/controller/dwc/Kconfig
index ab96da43e0c2..306fc71493fc 100644
--- a/drivers/pci/controller/dwc/Kconfig
+++ b/drivers/pci/controller/dwc/Kconfig
@@ -286,6 +286,20 @@ config PCIE_QCOM_EP
 	  to work in endpoint mode. The PCIe controller uses the DesignWare core
 	  plus Qualcomm-specific hardware wrappers.
 
+config PCIE_RCAR_GEN4
+	tristate
+
+config PCIE_RCAR_GEN4_HOST
+	tristate "Renesas R-Car Gen4 PCIe controller (host mode)"
+	depends on ARCH_RENESAS || COMPILE_TEST
+	depends on PCI_MSI
+	select PCIE_DW_HOST
+	select PCIE_RCAR_GEN4
+	help
+	  Say Y here if you want PCIe controller (host mode) on R-Car Gen4 SoCs.
+	  To compile this driver as a module, choose M here: the module will be
+	  called pcie-rcar-gen4.ko. This uses the DesignWare core.
+
 config PCIE_ROCKCHIP_DW_HOST
 	bool "Rockchip DesignWare PCIe controller"
 	select PCIE_DW
diff --git a/drivers/pci/controller/dwc/Makefile b/drivers/pci/controller/dwc/Makefile
index bf5c311875a1..bac103faa523 100644
--- a/drivers/pci/controller/dwc/Makefile
+++ b/drivers/pci/controller/dwc/Makefile
@@ -26,6 +26,7 @@ obj-$(CONFIG_PCIE_TEGRA194) += pcie-tegra194.o
 obj-$(CONFIG_PCIE_UNIPHIER) += pcie-uniphier.o
 obj-$(CONFIG_PCIE_UNIPHIER_EP) += pcie-uniphier-ep.o
 obj-$(CONFIG_PCIE_VISCONTI_HOST) += pcie-visconti.o
+obj-$(CONFIG_PCIE_RCAR_GEN4) += pcie-rcar-gen4.o
 
 # The following drivers are for devices that use the generic ACPI
 # pci_root.c driver but don't support standard ECAM config access.
diff --git a/drivers/pci/controller/dwc/pcie-rcar-gen4.c b/drivers/pci/controller/dwc/pcie-rcar-gen4.c
new file mode 100644
index 000000000000..fe727abd53a1
--- /dev/null
+++ b/drivers/pci/controller/dwc/pcie-rcar-gen4.c
@@ -0,0 +1,378 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * PCIe controller driver for Renesas R-Car Gen4 Series SoCs
+ * Copyright (C) 2022-2023 Renesas Electronics Corporation
+ */
+
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/pci.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/reset.h>
+
+#include "../../pci.h"
+#include "pcie-designware.h"
+
+/* Renesas-specific */
+/* PCIe Mode Setting Register 0 */
+#define PCIEMSR0		0x0000
+#define BIFUR_MOD_SET_ON	BIT(0)
+#define DEVICE_TYPE_RC		BIT(4)
+
+/* PCIe Interrupt Status 0 */
+#define PCIEINTSTS0		0x0084
+
+/* PCIe Interrupt Status 0 Enable */
+#define PCIEINTSTS0EN		0x0310
+#define MSI_CTRL_INT		BIT(26)
+#define SMLH_LINK_UP		BIT(7)
+#define RDLH_LINK_UP		BIT(6)
+
+/* PCIe DMA Interrupt Status Enable */
+#define PCIEDMAINTSTSEN		0x0314
+#define PCIEDMAINTSTSEN_INIT	GENMASK(15, 0)
+
+/* PCIe Reset Control Register 1 */
+#define PCIERSTCTRL1		0x0014
+#define APP_HOLD_PHY_RST	BIT(16)
+#define APP_LTSSM_ENABLE	BIT(0)
+
+#define RCAR_NUM_SPEED_CHANGE_RETRIES	10
+#define RCAR_MAX_LINK_SPEED		4
+
+struct rcar_gen4_pcie {
+	struct dw_pcie dw;
+	void __iomem *base;
+	struct platform_device *pdev;
+	enum dw_pcie_device_mode mode;
+};
+#define to_rcar_gen4_pcie(_dw)	container_of(_dw, struct rcar_gen4_pcie, dw)
+
+static void rcar_gen4_pcie_ltssm_enable(struct rcar_gen4_pcie *rcar,
+					bool enable)
+{
+	u32 val;
+
+	val = readl(rcar->base + PCIERSTCTRL1);
+	if (enable) {
+		val |= APP_LTSSM_ENABLE;
+		val &= ~APP_HOLD_PHY_RST;
+	} else {
+		/*
+		 * Since the datasheet of R-Car doesn't mention how to assert
+		 * the APP_HOLD_PHY_RST, don't assert it again. Otherwise,
+		 * hang-up issue happened in the dw_edma_core_off() when
+		 * the controller didn't detect a PCI device.
+		 */
+		val &= ~APP_LTSSM_ENABLE;
+	}
+	writel(val, rcar->base + PCIERSTCTRL1);
+}
+
+static int rcar_gen4_pcie_link_up(struct dw_pcie *dw)
+{
+	struct rcar_gen4_pcie *rcar = to_rcar_gen4_pcie(dw);
+	u32 val, mask;
+
+	val = readl(rcar->base + PCIEINTSTS0);
+	mask = RDLH_LINK_UP | SMLH_LINK_UP;
+
+	return (val & mask) == mask;
+}
+
+/*
+ * Manually initiate the speed change. Return 0 if change succeeded; otherwise
+ * -ETIMEDOUT.
+ */
+static int rcar_gen4_pcie_speed_change(struct dw_pcie *dw)
+{
+	u32 val;
+	int i;
+
+	val = dw_pcie_readl_dbi(dw, PCIE_LINK_WIDTH_SPEED_CONTROL);
+	val &= ~PORT_LOGIC_SPEED_CHANGE;
+	dw_pcie_writel_dbi(dw, PCIE_LINK_WIDTH_SPEED_CONTROL, val);
+
+	val = dw_pcie_readl_dbi(dw, PCIE_LINK_WIDTH_SPEED_CONTROL);
+	val |= PORT_LOGIC_SPEED_CHANGE;
+	dw_pcie_writel_dbi(dw, PCIE_LINK_WIDTH_SPEED_CONTROL, val);
+
+	for (i = 0; i < RCAR_NUM_SPEED_CHANGE_RETRIES; i++) {
+		val = dw_pcie_readl_dbi(dw, PCIE_LINK_WIDTH_SPEED_CONTROL);
+		if (!(val & PORT_LOGIC_SPEED_CHANGE))
+			return 0;
+		usleep_range(10000, 11000);
+	}
+
+	return -ETIMEDOUT;
+}
+
+/*
+ * Enable LTSSM of this controller and manually initiate the speed change.
+ * Always return 0.
+ */
+static int rcar_gen4_pcie_start_link(struct dw_pcie *dw)
+{
+	struct rcar_gen4_pcie *rcar = to_rcar_gen4_pcie(dw);
+	int i, changes;
+
+	rcar_gen4_pcie_ltssm_enable(rcar, true);
+
+	/*
+	 * Require direct speed change with retrying here if the link_gen is
+	 * PCIe Gen2 or higher.
+	 */
+	changes = min_not_zero(dw->link_gen, RCAR_MAX_LINK_SPEED) - 1;
+
+	/*
+	 * Since dw_pcie_setup_rc() sets it once, PCIe Gen2 will be trained.
+	 * So, this needs remaining times for up to PCIe Gen4 if RC mode.
+	 */
+	if (changes && rcar->mode == DW_PCIE_RC_TYPE)
+		changes--;
+
+	for (i = 0; i < changes; i++) {
+		/* It may not be connected in EP mode yet. So, break the loop */
+		if (rcar_gen4_pcie_speed_change(dw))
+			break;
+	}
+
+	return 0;
+}
+
+static void rcar_gen4_pcie_stop_link(struct dw_pcie *dw)
+{
+	struct rcar_gen4_pcie *rcar = to_rcar_gen4_pcie(dw);
+
+	rcar_gen4_pcie_ltssm_enable(rcar, false);
+}
+
+static int rcar_gen4_pcie_common_init(struct rcar_gen4_pcie *rcar)
+{
+	struct dw_pcie *dw = &rcar->dw;
+	u32 val;
+	int ret;
+
+	ret = clk_bulk_prepare_enable(DW_PCIE_NUM_CORE_CLKS, dw->core_clks);
+	if (ret) {
+		dev_err(dw->dev, "Enabling core clocks failed\n");
+		return ret;
+	}
+
+	if (!reset_control_status(dw->core_rsts[DW_PCIE_PWR_RST].rstc))
+		reset_control_assert(dw->core_rsts[DW_PCIE_PWR_RST].rstc);
+
+	val = readl(rcar->base + PCIEMSR0);
+	if (rcar->mode == DW_PCIE_RC_TYPE) {
+		val |= DEVICE_TYPE_RC;
+	} else {
+		ret = -EINVAL;
+		goto err_unprepare;
+	}
+
+	if (dw->num_lanes < 4)
+		val |= BIFUR_MOD_SET_ON;
+
+	writel(val, rcar->base + PCIEMSR0);
+
+	ret = reset_control_deassert(dw->core_rsts[DW_PCIE_PWR_RST].rstc);
+	if (ret)
+		goto err_unprepare;
+
+	return 0;
+
+err_unprepare:
+	clk_bulk_disable_unprepare(DW_PCIE_NUM_CORE_CLKS, dw->core_clks);
+
+	return ret;
+}
+
+static void rcar_gen4_pcie_common_deinit(struct rcar_gen4_pcie *rcar)
+{
+	struct dw_pcie *dw = &rcar->dw;
+
+	reset_control_assert(dw->core_rsts[DW_PCIE_PWR_RST].rstc);
+	clk_bulk_disable_unprepare(DW_PCIE_NUM_CORE_CLKS, dw->core_clks);
+}
+
+static int rcar_gen4_pcie_prepare(struct rcar_gen4_pcie *rcar)
+{
+	struct device *dev = rcar->dw.dev;
+	int err;
+
+	pm_runtime_enable(dev);
+	err = pm_runtime_resume_and_get(dev);
+	if (err < 0) {
+		dev_err(dev, "Runtime resume failed\n");
+		pm_runtime_disable(dev);
+	}
+
+	return err;
+}
+
+static void rcar_gen4_pcie_unprepare(struct rcar_gen4_pcie *rcar)
+{
+	struct device *dev = rcar->dw.dev;
+
+	pm_runtime_put(dev);
+	pm_runtime_disable(dev);
+}
+
+static int rcar_gen4_pcie_get_resources(struct rcar_gen4_pcie *rcar)
+{
+	/* Renesas-specific registers */
+	rcar->base = devm_platform_ioremap_resource_byname(rcar->pdev, "app");
+
+	return PTR_ERR_OR_ZERO(rcar->base);
+}
+
+static const struct dw_pcie_ops dw_pcie_ops = {
+	.start_link = rcar_gen4_pcie_start_link,
+	.stop_link = rcar_gen4_pcie_stop_link,
+	.link_up = rcar_gen4_pcie_link_up,
+};
+
+static struct rcar_gen4_pcie *rcar_gen4_pcie_alloc(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct rcar_gen4_pcie *rcar;
+
+	rcar = devm_kzalloc(dev, sizeof(*rcar), GFP_KERNEL);
+	if (!rcar)
+		return ERR_PTR(-ENOMEM);
+
+	rcar->dw.ops = &dw_pcie_ops;
+	rcar->dw.dev = dev;
+	rcar->pdev = pdev;
+	dw_pcie_cap_set(&rcar->dw, EDMA_UNROLL);
+	dw_pcie_cap_set(&rcar->dw, REQ_RES);
+	platform_set_drvdata(pdev, rcar);
+
+	return rcar;
+}
+
+/* Host mode */
+static int rcar_gen4_pcie_host_init(struct dw_pcie_rp *pp)
+{
+	struct dw_pcie *dw = to_dw_pcie_from_pp(pp);
+	struct rcar_gen4_pcie *rcar = to_rcar_gen4_pcie(dw);
+	int ret;
+	u32 val;
+
+	gpiod_set_value_cansleep(dw->pe_rst, 1);
+
+	ret = rcar_gen4_pcie_common_init(rcar);
+	if (ret)
+		return ret;
+
+	/*
+	 * According to the section 3.5.7.2 "RC Mode" in DWC PCIe Dual Mode
+	 * Rev.5.20a and 3.5.6.1 "RC mode" in DWC PCIe RC databook v5.20a, we
+	 * should disable two BARs to avoid unnecessary memory assignment
+	 * during device enumeration.
+	 */
+	dw_pcie_writel_dbi2(dw, PCI_BASE_ADDRESS_0, 0x0);
+	dw_pcie_writel_dbi2(dw, PCI_BASE_ADDRESS_1, 0x0);
+
+	/* Enable MSI interrupt signal */
+	val = readl(rcar->base + PCIEINTSTS0EN);
+	val |= MSI_CTRL_INT;
+	writel(val, rcar->base + PCIEINTSTS0EN);
+
+	msleep(PCIE_T_PVPERL_MS);	/* pe_rst requires 100msec delay */
+
+	gpiod_set_value_cansleep(dw->pe_rst, 0);
+
+	return 0;
+}
+
+static void rcar_gen4_pcie_host_deinit(struct dw_pcie_rp *pp)
+{
+	struct dw_pcie *dw = to_dw_pcie_from_pp(pp);
+	struct rcar_gen4_pcie *rcar = to_rcar_gen4_pcie(dw);
+
+	gpiod_set_value_cansleep(dw->pe_rst, 1);
+	rcar_gen4_pcie_common_deinit(rcar);
+}
+
+static const struct dw_pcie_host_ops rcar_gen4_pcie_host_ops = {
+	.host_init = rcar_gen4_pcie_host_init,
+	.host_deinit = rcar_gen4_pcie_host_deinit,
+};
+
+static int rcar_gen4_add_dw_pcie_rp(struct rcar_gen4_pcie *rcar)
+{
+	struct dw_pcie_rp *pp = &rcar->dw.pp;
+
+	pp->num_vectors = MAX_MSI_IRQS;
+	pp->ops = &rcar_gen4_pcie_host_ops;
+	rcar->mode = DW_PCIE_RC_TYPE;
+
+	return dw_pcie_host_init(pp);
+}
+
+static void rcar_gen4_remove_dw_pcie_rp(struct rcar_gen4_pcie *rcar)
+{
+	dw_pcie_host_deinit(&rcar->dw.pp);
+}
+
+static int rcar_gen4_pcie_probe(struct platform_device *pdev)
+{
+	struct rcar_gen4_pcie *rcar;
+	int err;
+
+	rcar = rcar_gen4_pcie_alloc(pdev);
+	if (IS_ERR(rcar))
+		return PTR_ERR(rcar);
+
+	err = rcar_gen4_pcie_get_resources(rcar);
+	if (err)
+		return err;
+
+	err = rcar_gen4_pcie_prepare(rcar);
+	if (err)
+		return err;
+
+	err = rcar_gen4_add_dw_pcie_rp(rcar);
+	if (err)
+		goto err_unprepare;
+
+	return 0;
+
+err_unprepare:
+	rcar_gen4_pcie_unprepare(rcar);
+
+	return err;
+}
+
+static void rcar_gen4_pcie_remove(struct platform_device *pdev)
+{
+	struct rcar_gen4_pcie *rcar = platform_get_drvdata(pdev);
+
+	rcar_gen4_remove_dw_pcie_rp(rcar);
+	rcar_gen4_pcie_unprepare(rcar);
+}
+
+static const struct of_device_id rcar_gen4_pcie_of_match[] = {
+	{ .compatible = "renesas,rcar-gen4-pcie", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, rcar_gen4_pcie_of_match);
+
+static struct platform_driver rcar_gen4_pcie_driver = {
+	.driver = {
+		.name = "pcie-rcar-gen4",
+		.of_match_table = rcar_gen4_pcie_of_match,
+		.probe_type = PROBE_PREFER_ASYNCHRONOUS,
+	},
+	.probe = rcar_gen4_pcie_probe,
+	.remove_new = rcar_gen4_pcie_remove,
+};
+module_platform_driver(rcar_gen4_pcie_driver);
+
+MODULE_DESCRIPTION("Renesas R-Car Gen4 PCIe controller driver");
+MODULE_LICENSE("GPL");
-- 
2.25.1

[PATCH v25 13/15] PCI: rcar-gen4: Add endpoint mode support

[Yoshihiro Shimoda]

Add R-Car Gen4 PCIe controller for endpoint mode. This controller is based
on Synopsys DesignWare PCIe.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
---
 drivers/pci/controller/dwc/Kconfig          |  11 ++
 drivers/pci/controller/dwc/pcie-rcar-gen4.c | 157 +++++++++++++++++++-
 2 files changed, 164 insertions(+), 4 deletions(-)

diff --git a/drivers/pci/controller/dwc/Kconfig b/drivers/pci/controller/dwc/Kconfig
index 306fc71493fc..5ac021dbd46a 100644
--- a/drivers/pci/controller/dwc/Kconfig
+++ b/drivers/pci/controller/dwc/Kconfig
@@ -300,6 +300,17 @@ config PCIE_RCAR_GEN4_HOST
 	  To compile this driver as a module, choose M here: the module will be
 	  called pcie-rcar-gen4.ko. This uses the DesignWare core.
 
+config PCIE_RCAR_GEN4_EP
+	tristate "Renesas R-Car Gen4 PCIe controller (endpoint mode)"
+	depends on ARCH_RENESAS || COMPILE_TEST
+	depends on PCI_ENDPOINT
+	select PCIE_DW_EP
+	select PCIE_RCAR_GEN4
+	help
+	  Say Y here if you want PCIe controller (endpoint mode) on R-Car Gen4
+	  SoCs. To compile this driver as a module, choose M here: the module
+	  will be called pcie-rcar-gen4.ko. This uses the DesignWare core.
+
 config PCIE_ROCKCHIP_DW_HOST
 	bool "Rockchip DesignWare PCIe controller"
 	select PCIE_DW
diff --git a/drivers/pci/controller/dwc/pcie-rcar-gen4.c b/drivers/pci/controller/dwc/pcie-rcar-gen4.c
index fe727abd53a1..3bc45e513b3d 100644
--- a/drivers/pci/controller/dwc/pcie-rcar-gen4.c
+++ b/drivers/pci/controller/dwc/pcie-rcar-gen4.c
@@ -21,6 +21,7 @@
 /* PCIe Mode Setting Register 0 */
 #define PCIEMSR0		0x0000
 #define BIFUR_MOD_SET_ON	BIT(0)
+#define DEVICE_TYPE_EP		0
 #define DEVICE_TYPE_RC		BIT(4)
 
 /* PCIe Interrupt Status 0 */
@@ -44,6 +45,9 @@
 #define RCAR_NUM_SPEED_CHANGE_RETRIES	10
 #define RCAR_MAX_LINK_SPEED		4
 
+#define RCAR_GEN4_PCIE_EP_FUNC_DBI_OFFSET	0x1000
+#define RCAR_GEN4_PCIE_EP_FUNC_DBI2_OFFSET	0x800
+
 struct rcar_gen4_pcie {
 	struct dw_pcie dw;
 	void __iomem *base;
@@ -52,6 +56,7 @@ struct rcar_gen4_pcie {
 };
 #define to_rcar_gen4_pcie(_dw)	container_of(_dw, struct rcar_gen4_pcie, dw)
 
+/* Common */
 static void rcar_gen4_pcie_ltssm_enable(struct rcar_gen4_pcie *rcar,
 					bool enable)
 {
@@ -169,6 +174,8 @@ static int rcar_gen4_pcie_common_init(struct rcar_gen4_pcie *rcar)
 	val = readl(rcar->base + PCIEMSR0);
 	if (rcar->mode == DW_PCIE_RC_TYPE) {
 		val |= DEVICE_TYPE_RC;
+	} else if (rcar->mode == DW_PCIE_EP_TYPE) {
+		val |= DEVICE_TYPE_EP;
 	} else {
 		ret = -EINVAL;
 		goto err_unprepare;
@@ -308,9 +315,11 @@ static int rcar_gen4_add_dw_pcie_rp(struct rcar_gen4_pcie *rcar)
 {
 	struct dw_pcie_rp *pp = &rcar->dw.pp;
 
+	if (!IS_ENABLED(CONFIG_PCIE_RCAR_GEN4_HOST))
+		return -ENODEV;
+
 	pp->num_vectors = MAX_MSI_IRQS;
 	pp->ops = &rcar_gen4_pcie_host_ops;
-	rcar->mode = DW_PCIE_RC_TYPE;
 
 	return dw_pcie_host_init(pp);
 }
@@ -320,6 +329,125 @@ static void rcar_gen4_remove_dw_pcie_rp(struct rcar_gen4_pcie *rcar)
 	dw_pcie_host_deinit(&rcar->dw.pp);
 }
 
+/* Endpoint mode */
+static void rcar_gen4_pcie_ep_pre_init(struct dw_pcie_ep *ep)
+{
+	struct dw_pcie *dw = to_dw_pcie_from_ep(ep);
+	struct rcar_gen4_pcie *rcar = to_rcar_gen4_pcie(dw);
+	int ret;
+
+	ret = rcar_gen4_pcie_common_init(rcar);
+	if (ret)
+		return;
+
+	writel(PCIEDMAINTSTSEN_INIT, rcar->base + PCIEDMAINTSTSEN);
+}
+
+static void rcar_gen4_pcie_ep_init(struct dw_pcie_ep *ep)
+{
+	struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
+	enum pci_barno bar;
+
+	for (bar = 0; bar < PCI_STD_NUM_BARS; bar++)
+		dw_pcie_ep_reset_bar(pci, bar);
+}
+
+static void rcar_gen4_pcie_ep_deinit(struct dw_pcie_ep *ep)
+{
+	struct dw_pcie *dw = to_dw_pcie_from_ep(ep);
+	struct rcar_gen4_pcie *rcar = to_rcar_gen4_pcie(dw);
+
+	writel(0, rcar->base + PCIEDMAINTSTSEN);
+	rcar_gen4_pcie_common_deinit(rcar);
+}
+
+static int rcar_gen4_pcie_ep_raise_irq(struct dw_pcie_ep *ep, u8 func_no,
+				       enum pci_epc_irq_type type,
+				       u16 interrupt_num)
+{
+	struct dw_pcie *dw = to_dw_pcie_from_ep(ep);
+
+	switch (type) {
+	case PCI_EPC_IRQ_LEGACY:
+		return dw_pcie_ep_raise_legacy_irq(ep, func_no);
+	case PCI_EPC_IRQ_MSI:
+		return dw_pcie_ep_raise_msi_irq(ep, func_no, interrupt_num);
+	default:
+		dev_err(dw->dev, "Unknown IRQ type\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static const struct pci_epc_features rcar_gen4_pcie_epc_features = {
+	.linkup_notifier = false,
+	.msi_capable = true,
+	.msix_capable = false,
+	.reserved_bar = 1 << BAR_1 | 1 << BAR_3 | 1 << BAR_5,
+	.align = SZ_1M,
+};
+
+static const struct pci_epc_features*
+rcar_gen4_pcie_ep_get_features(struct dw_pcie_ep *ep)
+{
+	return &rcar_gen4_pcie_epc_features;
+}
+
+static unsigned int rcar_gen4_pcie_ep_func_conf_select(struct dw_pcie_ep *ep,
+						       u8 func_no)
+{
+	return func_no * RCAR_GEN4_PCIE_EP_FUNC_DBI_OFFSET;
+}
+
+static unsigned int rcar_gen4_pcie_ep_get_dbi2_offset(struct dw_pcie_ep *ep,
+						      u8 func_no)
+{
+	return func_no * RCAR_GEN4_PCIE_EP_FUNC_DBI2_OFFSET;
+}
+
+static const struct dw_pcie_ep_ops pcie_ep_ops = {
+	.pre_init = rcar_gen4_pcie_ep_pre_init,
+	.ep_init = rcar_gen4_pcie_ep_init,
+	.deinit = rcar_gen4_pcie_ep_deinit,
+	.raise_irq = rcar_gen4_pcie_ep_raise_irq,
+	.get_features = rcar_gen4_pcie_ep_get_features,
+	.func_conf_select = rcar_gen4_pcie_ep_func_conf_select,
+	.get_dbi2_offset = rcar_gen4_pcie_ep_get_dbi2_offset,
+};
+
+static int rcar_gen4_add_dw_pcie_ep(struct rcar_gen4_pcie *rcar)
+{
+	struct dw_pcie_ep *ep = &rcar->dw.ep;
+
+	if (!IS_ENABLED(CONFIG_PCIE_RCAR_GEN4_EP))
+		return -ENODEV;
+
+	ep->ops = &pcie_ep_ops;
+
+	return dw_pcie_ep_init(ep);
+}
+
+static void rcar_gen4_remove_dw_pcie_ep(struct rcar_gen4_pcie *rcar)
+{
+	dw_pcie_ep_exit(&rcar->dw.ep);
+}
+
+/* Common */
+static int rcar_gen4_add_dw_pcie(struct rcar_gen4_pcie *rcar)
+{
+	rcar->mode = (enum dw_pcie_device_mode)of_device_get_match_data(&rcar->pdev->dev);
+
+	switch (rcar->mode) {
+	case DW_PCIE_RC_TYPE:
+		return rcar_gen4_add_dw_pcie_rp(rcar);
+	case DW_PCIE_EP_TYPE:
+		return rcar_gen4_add_dw_pcie_ep(rcar);
+	default:
+		return -EINVAL;
+	}
+}
+
 static int rcar_gen4_pcie_probe(struct platform_device *pdev)
 {
 	struct rcar_gen4_pcie *rcar;
@@ -337,7 +465,7 @@ static int rcar_gen4_pcie_probe(struct platform_device *pdev)
 	if (err)
 		return err;
 
-	err = rcar_gen4_add_dw_pcie_rp(rcar);
+	err = rcar_gen4_add_dw_pcie(rcar);
 	if (err)
 		goto err_unprepare;
 
@@ -349,16 +477,37 @@ static int rcar_gen4_pcie_probe(struct platform_device *pdev)
 	return err;
 }
 
+static void rcar_gen4_remove_dw_pcie(struct rcar_gen4_pcie *rcar)
+{
+	switch (rcar->mode) {
+	case DW_PCIE_RC_TYPE:
+		rcar_gen4_remove_dw_pcie_rp(rcar);
+		break;
+	case DW_PCIE_EP_TYPE:
+		rcar_gen4_remove_dw_pcie_ep(rcar);
+		break;
+	default:
+		break;
+	}
+}
+
 static void rcar_gen4_pcie_remove(struct platform_device *pdev)
 {
 	struct rcar_gen4_pcie *rcar = platform_get_drvdata(pdev);
 
-	rcar_gen4_remove_dw_pcie_rp(rcar);
+	rcar_gen4_remove_dw_pcie(rcar);
 	rcar_gen4_pcie_unprepare(rcar);
 }
 
 static const struct of_device_id rcar_gen4_pcie_of_match[] = {
-	{ .compatible = "renesas,rcar-gen4-pcie", },
+	{
+		.compatible = "renesas,rcar-gen4-pcie",
+		.data = (void *)DW_PCIE_RC_TYPE,
+	},
+	{
+		.compatible = "renesas,rcar-gen4-pcie-ep",
+		.data = (void *)DW_PCIE_EP_TYPE,
+	},
 	{},
 };
 MODULE_DEVICE_TABLE(of, rcar_gen4_pcie_of_match);
-- 
2.25.1

[PATCH v25 14/15] MAINTAINERS: Update PCI DRIVER FOR RENESAS R-CAR for R-Car Gen4

[Yoshihiro Shimoda]

Update this entry for R-Car Gen4's source code.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
---
 MAINTAINERS | 1 +
 1 file changed, 1 insertion(+)

diff --git a/MAINTAINERS b/MAINTAINERS
index 90f13281d297..4115e648b4af 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -16424,6 +16424,7 @@ L:	linux-renesas-soc@vger.kernel.org
 S:	Maintained
 F:	Documentation/devicetree/bindings/pci/*rcar*
 F:	drivers/pci/controller/*rcar*
+F:	drivers/pci/controller/dwc/*rcar*
 
 PCI DRIVER FOR SAMSUNG EXYNOS
 M:	Jingoo Han <jingoohan1@gmail.com>
-- 
2.25.1

[PATCH v25 15/15] misc: pci_endpoint_test: Add Device ID for R-Car S4-8 PCIe controller

[Yoshihiro Shimoda]

Add Renesas R8A779F0 in pci_device_id table so that pci-epf-test
can be used for testing PCIe EP on R-Car S4-8.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
---
 drivers/misc/pci_endpoint_test.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/misc/pci_endpoint_test.c b/drivers/misc/pci_endpoint_test.c
index ed4d0ef5e5c3..150083dab71a 100644
--- a/drivers/misc/pci_endpoint_test.c
+++ b/drivers/misc/pci_endpoint_test.c
@@ -81,6 +81,7 @@
 #define PCI_DEVICE_ID_RENESAS_R8A774B1		0x002b
 #define PCI_DEVICE_ID_RENESAS_R8A774C0		0x002d
 #define PCI_DEVICE_ID_RENESAS_R8A774E1		0x0025
+#define PCI_DEVICE_ID_RENESAS_R8A779F0		0x0031
 
 static DEFINE_IDA(pci_endpoint_test_ida);
 
@@ -990,6 +991,9 @@ static const struct pci_device_id pci_endpoint_test_tbl[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_RENESAS, PCI_DEVICE_ID_RENESAS_R8A774B1),},
 	{ PCI_DEVICE(PCI_VENDOR_ID_RENESAS, PCI_DEVICE_ID_RENESAS_R8A774C0),},
 	{ PCI_DEVICE(PCI_VENDOR_ID_RENESAS, PCI_DEVICE_ID_RENESAS_R8A774E1),},
+	{ PCI_DEVICE(PCI_VENDOR_ID_RENESAS, PCI_DEVICE_ID_RENESAS_R8A779F0),
+	  .driver_data = (kernel_ulong_t)&default_data,
+	},
 	{ PCI_DEVICE(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_J721E),
 	  .driver_data = (kernel_ulong_t)&j721e_data,
 	},
-- 
2.25.1

Re: [PATCH v25 12/15] PCI: rcar-gen4: Add R-Car Gen4 PCIe controller support for host mode

[Manivannan Sadhasivam]

On Wed, Oct 18, 2023 at 05:56:28PM +0900, Yoshihiro Shimoda wrote:
> Add R-Car Gen4 PCIe controller support for host mode.
> 
> This controller is based on Synopsys DesignWare PCIe. However, this
> particular controller has a number of vendor-specific registers, and as
> such, requires initialization code like mode setting and retraining and
> so on.
> 
> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>

Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>

- Mani

> Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
> ---
>  drivers/pci/controller/dwc/Kconfig          |  14 +
>  drivers/pci/controller/dwc/Makefile         |   1 +
>  drivers/pci/controller/dwc/pcie-rcar-gen4.c | 378 ++++++++++++++++++++
>  3 files changed, 393 insertions(+)
>  create mode 100644 drivers/pci/controller/dwc/pcie-rcar-gen4.c
> 
> diff --git a/drivers/pci/controller/dwc/Kconfig b/drivers/pci/controller/dwc/Kconfig
> index ab96da43e0c2..306fc71493fc 100644
> --- a/drivers/pci/controller/dwc/Kconfig
> +++ b/drivers/pci/controller/dwc/Kconfig
> @@ -286,6 +286,20 @@ config PCIE_QCOM_EP
>  	  to work in endpoint mode. The PCIe controller uses the DesignWare core
>  	  plus Qualcomm-specific hardware wrappers.
>  
> +config PCIE_RCAR_GEN4
> +	tristate
> +
> +config PCIE_RCAR_GEN4_HOST
> +	tristate "Renesas R-Car Gen4 PCIe controller (host mode)"
> +	depends on ARCH_RENESAS || COMPILE_TEST
> +	depends on PCI_MSI
> +	select PCIE_DW_HOST
> +	select PCIE_RCAR_GEN4
> +	help
> +	  Say Y here if you want PCIe controller (host mode) on R-Car Gen4 SoCs.
> +	  To compile this driver as a module, choose M here: the module will be
> +	  called pcie-rcar-gen4.ko. This uses the DesignWare core.
> +
>  config PCIE_ROCKCHIP_DW_HOST
>  	bool "Rockchip DesignWare PCIe controller"
>  	select PCIE_DW
> diff --git a/drivers/pci/controller/dwc/Makefile b/drivers/pci/controller/dwc/Makefile
> index bf5c311875a1..bac103faa523 100644
> --- a/drivers/pci/controller/dwc/Makefile
> +++ b/drivers/pci/controller/dwc/Makefile
> @@ -26,6 +26,7 @@ obj-$(CONFIG_PCIE_TEGRA194) += pcie-tegra194.o
>  obj-$(CONFIG_PCIE_UNIPHIER) += pcie-uniphier.o
>  obj-$(CONFIG_PCIE_UNIPHIER_EP) += pcie-uniphier-ep.o
>  obj-$(CONFIG_PCIE_VISCONTI_HOST) += pcie-visconti.o
> +obj-$(CONFIG_PCIE_RCAR_GEN4) += pcie-rcar-gen4.o
>  
>  # The following drivers are for devices that use the generic ACPI
>  # pci_root.c driver but don't support standard ECAM config access.
> diff --git a/drivers/pci/controller/dwc/pcie-rcar-gen4.c b/drivers/pci/controller/dwc/pcie-rcar-gen4.c
> new file mode 100644
> index 000000000000..fe727abd53a1
> --- /dev/null
> +++ b/drivers/pci/controller/dwc/pcie-rcar-gen4.c
> @@ -0,0 +1,378 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * PCIe controller driver for Renesas R-Car Gen4 Series SoCs
> + * Copyright (C) 2022-2023 Renesas Electronics Corporation
> + */
> +
> +#include <linux/delay.h>
> +#include <linux/interrupt.h>
> +#include <linux/io.h>
> +#include <linux/module.h>
> +#include <linux/of_device.h>
> +#include <linux/pci.h>
> +#include <linux/platform_device.h>
> +#include <linux/pm_runtime.h>
> +#include <linux/reset.h>
> +
> +#include "../../pci.h"
> +#include "pcie-designware.h"
> +
> +/* Renesas-specific */
> +/* PCIe Mode Setting Register 0 */
> +#define PCIEMSR0		0x0000
> +#define BIFUR_MOD_SET_ON	BIT(0)
> +#define DEVICE_TYPE_RC		BIT(4)
> +
> +/* PCIe Interrupt Status 0 */
> +#define PCIEINTSTS0		0x0084
> +
> +/* PCIe Interrupt Status 0 Enable */
> +#define PCIEINTSTS0EN		0x0310
> +#define MSI_CTRL_INT		BIT(26)
> +#define SMLH_LINK_UP		BIT(7)
> +#define RDLH_LINK_UP		BIT(6)
> +
> +/* PCIe DMA Interrupt Status Enable */
> +#define PCIEDMAINTSTSEN		0x0314
> +#define PCIEDMAINTSTSEN_INIT	GENMASK(15, 0)
> +
> +/* PCIe Reset Control Register 1 */
> +#define PCIERSTCTRL1		0x0014
> +#define APP_HOLD_PHY_RST	BIT(16)
> +#define APP_LTSSM_ENABLE	BIT(0)
> +
> +#define RCAR_NUM_SPEED_CHANGE_RETRIES	10
> +#define RCAR_MAX_LINK_SPEED		4
> +
> +struct rcar_gen4_pcie {
> +	struct dw_pcie dw;
> +	void __iomem *base;
> +	struct platform_device *pdev;
> +	enum dw_pcie_device_mode mode;
> +};
> +#define to_rcar_gen4_pcie(_dw)	container_of(_dw, struct rcar_gen4_pcie, dw)
> +
> +static void rcar_gen4_pcie_ltssm_enable(struct rcar_gen4_pcie *rcar,
> +					bool enable)
> +{
> +	u32 val;
> +
> +	val = readl(rcar->base + PCIERSTCTRL1);
> +	if (enable) {
> +		val |= APP_LTSSM_ENABLE;
> +		val &= ~APP_HOLD_PHY_RST;
> +	} else {
> +		/*
> +		 * Since the datasheet of R-Car doesn't mention how to assert
> +		 * the APP_HOLD_PHY_RST, don't assert it again. Otherwise,
> +		 * hang-up issue happened in the dw_edma_core_off() when
> +		 * the controller didn't detect a PCI device.
> +		 */
> +		val &= ~APP_LTSSM_ENABLE;
> +	}
> +	writel(val, rcar->base + PCIERSTCTRL1);
> +}
> +
> +static int rcar_gen4_pcie_link_up(struct dw_pcie *dw)
> +{
> +	struct rcar_gen4_pcie *rcar = to_rcar_gen4_pcie(dw);
> +	u32 val, mask;
> +
> +	val = readl(rcar->base + PCIEINTSTS0);
> +	mask = RDLH_LINK_UP | SMLH_LINK_UP;
> +
> +	return (val & mask) == mask;
> +}
> +
> +/*
> + * Manually initiate the speed change. Return 0 if change succeeded; otherwise
> + * -ETIMEDOUT.
> + */
> +static int rcar_gen4_pcie_speed_change(struct dw_pcie *dw)
> +{
> +	u32 val;
> +	int i;
> +
> +	val = dw_pcie_readl_dbi(dw, PCIE_LINK_WIDTH_SPEED_CONTROL);
> +	val &= ~PORT_LOGIC_SPEED_CHANGE;
> +	dw_pcie_writel_dbi(dw, PCIE_LINK_WIDTH_SPEED_CONTROL, val);
> +
> +	val = dw_pcie_readl_dbi(dw, PCIE_LINK_WIDTH_SPEED_CONTROL);
> +	val |= PORT_LOGIC_SPEED_CHANGE;
> +	dw_pcie_writel_dbi(dw, PCIE_LINK_WIDTH_SPEED_CONTROL, val);
> +
> +	for (i = 0; i < RCAR_NUM_SPEED_CHANGE_RETRIES; i++) {
> +		val = dw_pcie_readl_dbi(dw, PCIE_LINK_WIDTH_SPEED_CONTROL);
> +		if (!(val & PORT_LOGIC_SPEED_CHANGE))
> +			return 0;
> +		usleep_range(10000, 11000);
> +	}
> +
> +	return -ETIMEDOUT;
> +}
> +
> +/*
> + * Enable LTSSM of this controller and manually initiate the speed change.
> + * Always return 0.
> + */
> +static int rcar_gen4_pcie_start_link(struct dw_pcie *dw)
> +{
> +	struct rcar_gen4_pcie *rcar = to_rcar_gen4_pcie(dw);
> +	int i, changes;
> +
> +	rcar_gen4_pcie_ltssm_enable(rcar, true);
> +
> +	/*
> +	 * Require direct speed change with retrying here if the link_gen is
> +	 * PCIe Gen2 or higher.
> +	 */
> +	changes = min_not_zero(dw->link_gen, RCAR_MAX_LINK_SPEED) - 1;
> +
> +	/*
> +	 * Since dw_pcie_setup_rc() sets it once, PCIe Gen2 will be trained.
> +	 * So, this needs remaining times for up to PCIe Gen4 if RC mode.
> +	 */
> +	if (changes && rcar->mode == DW_PCIE_RC_TYPE)
> +		changes--;
> +
> +	for (i = 0; i < changes; i++) {
> +		/* It may not be connected in EP mode yet. So, break the loop */
> +		if (rcar_gen4_pcie_speed_change(dw))
> +			break;
> +	}
> +
> +	return 0;
> +}
> +
> +static void rcar_gen4_pcie_stop_link(struct dw_pcie *dw)
> +{
> +	struct rcar_gen4_pcie *rcar = to_rcar_gen4_pcie(dw);
> +
> +	rcar_gen4_pcie_ltssm_enable(rcar, false);
> +}
> +
> +static int rcar_gen4_pcie_common_init(struct rcar_gen4_pcie *rcar)
> +{
> +	struct dw_pcie *dw = &rcar->dw;
> +	u32 val;
> +	int ret;
> +
> +	ret = clk_bulk_prepare_enable(DW_PCIE_NUM_CORE_CLKS, dw->core_clks);
> +	if (ret) {
> +		dev_err(dw->dev, "Enabling core clocks failed\n");
> +		return ret;
> +	}
> +
> +	if (!reset_control_status(dw->core_rsts[DW_PCIE_PWR_RST].rstc))
> +		reset_control_assert(dw->core_rsts[DW_PCIE_PWR_RST].rstc);
> +
> +	val = readl(rcar->base + PCIEMSR0);
> +	if (rcar->mode == DW_PCIE_RC_TYPE) {
> +		val |= DEVICE_TYPE_RC;
> +	} else {
> +		ret = -EINVAL;
> +		goto err_unprepare;
> +	}
> +
> +	if (dw->num_lanes < 4)
> +		val |= BIFUR_MOD_SET_ON;
> +
> +	writel(val, rcar->base + PCIEMSR0);
> +
> +	ret = reset_control_deassert(dw->core_rsts[DW_PCIE_PWR_RST].rstc);
> +	if (ret)
> +		goto err_unprepare;
> +
> +	return 0;
> +
> +err_unprepare:
> +	clk_bulk_disable_unprepare(DW_PCIE_NUM_CORE_CLKS, dw->core_clks);
> +
> +	return ret;
> +}
> +
> +static void rcar_gen4_pcie_common_deinit(struct rcar_gen4_pcie *rcar)
> +{
> +	struct dw_pcie *dw = &rcar->dw;
> +
> +	reset_control_assert(dw->core_rsts[DW_PCIE_PWR_RST].rstc);
> +	clk_bulk_disable_unprepare(DW_PCIE_NUM_CORE_CLKS, dw->core_clks);
> +}
> +
> +static int rcar_gen4_pcie_prepare(struct rcar_gen4_pcie *rcar)
> +{
> +	struct device *dev = rcar->dw.dev;
> +	int err;
> +
> +	pm_runtime_enable(dev);
> +	err = pm_runtime_resume_and_get(dev);
> +	if (err < 0) {
> +		dev_err(dev, "Runtime resume failed\n");
> +		pm_runtime_disable(dev);
> +	}
> +
> +	return err;
> +}
> +
> +static void rcar_gen4_pcie_unprepare(struct rcar_gen4_pcie *rcar)
> +{
> +	struct device *dev = rcar->dw.dev;
> +
> +	pm_runtime_put(dev);
> +	pm_runtime_disable(dev);
> +}
> +
> +static int rcar_gen4_pcie_get_resources(struct rcar_gen4_pcie *rcar)
> +{
> +	/* Renesas-specific registers */
> +	rcar->base = devm_platform_ioremap_resource_byname(rcar->pdev, "app");
> +
> +	return PTR_ERR_OR_ZERO(rcar->base);
> +}
> +
> +static const struct dw_pcie_ops dw_pcie_ops = {
> +	.start_link = rcar_gen4_pcie_start_link,
> +	.stop_link = rcar_gen4_pcie_stop_link,
> +	.link_up = rcar_gen4_pcie_link_up,
> +};
> +
> +static struct rcar_gen4_pcie *rcar_gen4_pcie_alloc(struct platform_device *pdev)
> +{
> +	struct device *dev = &pdev->dev;
> +	struct rcar_gen4_pcie *rcar;
> +
> +	rcar = devm_kzalloc(dev, sizeof(*rcar), GFP_KERNEL);
> +	if (!rcar)
> +		return ERR_PTR(-ENOMEM);
> +
> +	rcar->dw.ops = &dw_pcie_ops;
> +	rcar->dw.dev = dev;
> +	rcar->pdev = pdev;
> +	dw_pcie_cap_set(&rcar->dw, EDMA_UNROLL);
> +	dw_pcie_cap_set(&rcar->dw, REQ_RES);
> +	platform_set_drvdata(pdev, rcar);
> +
> +	return rcar;
> +}
> +
> +/* Host mode */
> +static int rcar_gen4_pcie_host_init(struct dw_pcie_rp *pp)
> +{
> +	struct dw_pcie *dw = to_dw_pcie_from_pp(pp);
> +	struct rcar_gen4_pcie *rcar = to_rcar_gen4_pcie(dw);
> +	int ret;
> +	u32 val;
> +
> +	gpiod_set_value_cansleep(dw->pe_rst, 1);
> +
> +	ret = rcar_gen4_pcie_common_init(rcar);
> +	if (ret)
> +		return ret;
> +
> +	/*
> +	 * According to the section 3.5.7.2 "RC Mode" in DWC PCIe Dual Mode
> +	 * Rev.5.20a and 3.5.6.1 "RC mode" in DWC PCIe RC databook v5.20a, we
> +	 * should disable two BARs to avoid unnecessary memory assignment
> +	 * during device enumeration.
> +	 */
> +	dw_pcie_writel_dbi2(dw, PCI_BASE_ADDRESS_0, 0x0);
> +	dw_pcie_writel_dbi2(dw, PCI_BASE_ADDRESS_1, 0x0);
> +
> +	/* Enable MSI interrupt signal */
> +	val = readl(rcar->base + PCIEINTSTS0EN);
> +	val |= MSI_CTRL_INT;
> +	writel(val, rcar->base + PCIEINTSTS0EN);
> +
> +	msleep(PCIE_T_PVPERL_MS);	/* pe_rst requires 100msec delay */
> +
> +	gpiod_set_value_cansleep(dw->pe_rst, 0);
> +
> +	return 0;
> +}
> +
> +static void rcar_gen4_pcie_host_deinit(struct dw_pcie_rp *pp)
> +{
> +	struct dw_pcie *dw = to_dw_pcie_from_pp(pp);
> +	struct rcar_gen4_pcie *rcar = to_rcar_gen4_pcie(dw);
> +
> +	gpiod_set_value_cansleep(dw->pe_rst, 1);
> +	rcar_gen4_pcie_common_deinit(rcar);
> +}
> +
> +static const struct dw_pcie_host_ops rcar_gen4_pcie_host_ops = {
> +	.host_init = rcar_gen4_pcie_host_init,
> +	.host_deinit = rcar_gen4_pcie_host_deinit,
> +};
> +
> +static int rcar_gen4_add_dw_pcie_rp(struct rcar_gen4_pcie *rcar)
> +{
> +	struct dw_pcie_rp *pp = &rcar->dw.pp;
> +
> +	pp->num_vectors = MAX_MSI_IRQS;
> +	pp->ops = &rcar_gen4_pcie_host_ops;
> +	rcar->mode = DW_PCIE_RC_TYPE;
> +
> +	return dw_pcie_host_init(pp);
> +}
> +
> +static void rcar_gen4_remove_dw_pcie_rp(struct rcar_gen4_pcie *rcar)
> +{
> +	dw_pcie_host_deinit(&rcar->dw.pp);
> +}
> +
> +static int rcar_gen4_pcie_probe(struct platform_device *pdev)
> +{
> +	struct rcar_gen4_pcie *rcar;
> +	int err;
> +
> +	rcar = rcar_gen4_pcie_alloc(pdev);
> +	if (IS_ERR(rcar))
> +		return PTR_ERR(rcar);
> +
> +	err = rcar_gen4_pcie_get_resources(rcar);
> +	if (err)
> +		return err;
> +
> +	err = rcar_gen4_pcie_prepare(rcar);
> +	if (err)
> +		return err;
> +
> +	err = rcar_gen4_add_dw_pcie_rp(rcar);
> +	if (err)
> +		goto err_unprepare;
> +
> +	return 0;
> +
> +err_unprepare:
> +	rcar_gen4_pcie_unprepare(rcar);
> +
> +	return err;
> +}
> +
> +static void rcar_gen4_pcie_remove(struct platform_device *pdev)
> +{
> +	struct rcar_gen4_pcie *rcar = platform_get_drvdata(pdev);
> +
> +	rcar_gen4_remove_dw_pcie_rp(rcar);
> +	rcar_gen4_pcie_unprepare(rcar);
> +}
> +
> +static const struct of_device_id rcar_gen4_pcie_of_match[] = {
> +	{ .compatible = "renesas,rcar-gen4-pcie", },
> +	{},
> +};
> +MODULE_DEVICE_TABLE(of, rcar_gen4_pcie_of_match);
> +
> +static struct platform_driver rcar_gen4_pcie_driver = {
> +	.driver = {
> +		.name = "pcie-rcar-gen4",
> +		.of_match_table = rcar_gen4_pcie_of_match,
> +		.probe_type = PROBE_PREFER_ASYNCHRONOUS,
> +	},
> +	.probe = rcar_gen4_pcie_probe,
> +	.remove_new = rcar_gen4_pcie_remove,
> +};
> +module_platform_driver(rcar_gen4_pcie_driver);
> +
> +MODULE_DESCRIPTION("Renesas R-Car Gen4 PCIe controller driver");
> +MODULE_LICENSE("GPL");
> -- 
> 2.25.1
> 

-- 
மணிவண்ணன் சதாசிவம்

Re: [PATCH v25 00/15] PCI: dwc: rcar-gen4: Add R-Car Gen4 PCIe support

[Bjorn Helgaas]

On Wed, Oct 18, 2023 at 05:56:16PM +0900, Yoshihiro Shimoda wrote:
> Add R-Car S4-8 (R-Car Gen4) PCIe controller for both host and endpoint modes.
> To support them, modify PCIe DesignWare common codes.
> 
> Changes from v24:
> https://lore.kernel.org/linux-pci/20231011071423.249458-1-yoshihiro.shimoda.uh@renesas.com/
>  - Based on the latest pci.git / next branch.
>  - Reordering the patches. (This is suggested by Bjorn.)
>  - Drop "PCI: dwc: Disable two BARs to avoid unnecessary memory assignment"
>    because break other platforms.

Does R-Car Gen4 still work without this patch?

The previous commit log said host mode didn't work:

  PCI: dwc: Disable two BARs to avoid unnecessary memory assignment

  According to the section 3.5.7.2 "RC Mode" in DWC PCIe Dual Mode
  Rev.5.20a, we should disable two BARs to avoid unnecessary memory
  assignment during device enumeration. Otherwise, Renesas R-Car Gen4
  PCIe controllers cannot work correctly in host mode.

(from
https://lore.kernel.org/r/20231011071423.249458-9-yoshihiro.shimoda.uh@renesas.com)

I don't think we want to merge the driver unless it actually works.

Bjorn

RE: [PATCH v25 00/15] PCI: dwc: rcar-gen4: Add R-Car Gen4 PCIe support

[Yoshihiro Shimoda]

Hello Bjorn,

> From: Bjorn Helgaas, Sent: Thursday, October 19, 2023 12:11 PM
> 
> On Wed, Oct 18, 2023 at 05:56:16PM +0900, Yoshihiro Shimoda wrote:
> > Add R-Car S4-8 (R-Car Gen4) PCIe controller for both host and endpoint modes.
> > To support them, modify PCIe DesignWare common codes.
> >
> > Changes from v24:
> >
<snip URL>
> >  - Based on the latest pci.git / next branch.
> >  - Reordering the patches. (This is suggested by Bjorn.)
> >  - Drop "PCI: dwc: Disable two BARs to avoid unnecessary memory assignment"
> >    because break other platforms.
> 
> Does R-Car Gen4 still work without this patch?

Yes, R-Car Gen4 still work without this patch because I added this code into
the patch 12/15 again:

---
+static int rcar_gen4_pcie_host_init(struct dw_pcie_rp *pp)
+{
...
+	/*
+	 * According to the section 3.5.7.2 "RC Mode" in DWC PCIe Dual Mode
+	 * Rev.5.20a and 3.5.6.1 "RC mode" in DWC PCIe RC databook v5.20a, we
+	 * should disable two BARs to avoid unnecessary memory assignment
+	 * during device enumeration.
+	 */
+	dw_pcie_writel_dbi2(dw, PCI_BASE_ADDRESS_0, 0x0);
+	dw_pcie_writel_dbi2(dw, PCI_BASE_ADDRESS_1, 0x0);
---

I also mentioned about this on the cover-letter like below, but it may be difficult
to understand. I'm sorry about lack explanation... I should have explained one sentence
about that...

>> - Add specific-setting by using dbi2 again in the patch 12/15.
>> - Modify commend of the specific-setting in the patch 12/15. Serge suggested
>>   this on v23 but I missed to modify this on v24.

> The previous commit log said host mode didn't work:
> 
>   PCI: dwc: Disable two BARs to avoid unnecessary memory assignment
> 
>   According to the section 3.5.7.2 "RC Mode" in DWC PCIe Dual Mode
>   Rev.5.20a, we should disable two BARs to avoid unnecessary memory
>   assignment during device enumeration. Otherwise, Renesas R-Car Gen4
>   PCIe controllers cannot work correctly in host mode.
> 
> (from https://lore.kernel.org/all/20231011071423.249458-9-yoshihiro.shimoda.uh@renesas.com/)
> 
> I don't think we want to merge the driver unless it actually works.

I understood it.

Best regards,
Yoshihiro Shimoda

> Bjorn

Re: [PATCH v25 00/15] PCI: dwc: rcar-gen4: Add R-Car Gen4 PCIe support

[Bjorn Helgaas]

On Thu, Oct 19, 2023 at 04:08:52AM +0000, Yoshihiro Shimoda wrote:
> > From: Bjorn Helgaas, Sent: Thursday, October 19, 2023 12:11 PM
> > On Wed, Oct 18, 2023 at 05:56:16PM +0900, Yoshihiro Shimoda wrote:
> > > Add R-Car S4-8 (R-Car Gen4) PCIe controller for both host and endpoint modes.
> > > To support them, modify PCIe DesignWare common codes.
> > >
> > > Changes from v24:
> > >
> <snip URL>
> > >  - Based on the latest pci.git / next branch.
> > >  - Reordering the patches. (This is suggested by Bjorn.)
> > >  - Drop "PCI: dwc: Disable two BARs to avoid unnecessary memory assignment"
> > >    because break other platforms.
> > 
> > Does R-Car Gen4 still work without this patch?
> 
> Yes, R-Car Gen4 still work without this patch because I added this code into
> the patch 12/15 again:
> 
> ---
> +static int rcar_gen4_pcie_host_init(struct dw_pcie_rp *pp)
> +{
> ...
> +	/*
> +	 * According to the section 3.5.7.2 "RC Mode" in DWC PCIe Dual Mode
> +	 * Rev.5.20a and 3.5.6.1 "RC mode" in DWC PCIe RC databook v5.20a, we
> +	 * should disable two BARs to avoid unnecessary memory assignment
> +	 * during device enumeration.
> +	 */
> +	dw_pcie_writel_dbi2(dw, PCI_BASE_ADDRESS_0, 0x0);
> +	dw_pcie_writel_dbi2(dw, PCI_BASE_ADDRESS_1, 0x0);

Great, thanks!

Bjorn

Re: [PATCH v25 00/15] PCI: dwc: rcar-gen4: Add R-Car Gen4 PCIe support

[Krzysztof Wilczyński]

Hello,

> Add R-Car S4-8 (R-Car Gen4) PCIe controller for both host and endpoint modes.
> To support them, modify PCIe DesignWare common codes.
[...]

Applied to controller/rcar, thank you!

[01/15] PCI: Add T_PVPERL macro
        https://git.kernel.org/pci/pci/c/164f66be0c25
[02/15] PCI: dwc: Add dw_pcie_link_set_max_link_width()
        https://git.kernel.org/pci/pci/c/a9a1bcba9025
[03/15] PCI: dwc: Add missing PCI_EXP_LNKCAP_MLW handling
        https://git.kernel.org/pci/pci/c/89db0793c9f2
[04/15] PCI: tegra194: Drop PCI_EXP_LNKSTA_NLW setting
        https://git.kernel.org/pci/pci/c/1a9745476cae
[05/15] PCI: dwc: endpoint: Add multiple PFs support for dbi2
        https://git.kernel.org/pci/pci/c/7873b49b41b9
[06/15] PCI: dwc: Add EDMA_UNROLL capability flag
        https://git.kernel.org/pci/pci/c/1896d17f9168
[07/15] PCI: dwc: Expose dw_pcie_ep_exit() to module
        https://git.kernel.org/pci/pci/c/2066b41a2ef8
[08/15] PCI: dwc: endpoint: Introduce .pre_init() and .deinit()
        https://git.kernel.org/pci/pci/c/52b4edbc304c
[09/15] dt-bindings: PCI: dwc: Update maxItems of reg and reg-names
        https://git.kernel.org/pci/pci/c/7e8fcf83c48a
[10/15] dt-bindings: PCI: renesas: Add R-Car Gen4 PCIe Host
        https://git.kernel.org/pci/pci/c/e8858cc55f62
[11/15] dt-bindings: PCI: renesas: Add R-Car Gen4 PCIe Endpoint
        https://git.kernel.org/pci/pci/c/5df0306d03c9
[12/15] PCI: rcar-gen4: Add R-Car Gen4 PCIe controller support for host mode
        https://git.kernel.org/pci/pci/c/8227bf7a81e6
[13/15] PCI: rcar-gen4: Add endpoint mode support
        https://git.kernel.org/pci/pci/c/d3c54d8ba855
[14/15] MAINTAINERS: Update PCI DRIVER FOR RENESAS R-CAR for R-Car Gen4
        https://git.kernel.org/pci/pci/c/2c1cca77c894
[15/15] misc: pci_endpoint_test: Add Device ID for R-Car S4-8 PCIe controller
        https://git.kernel.org/pci/pci/c/a21169341a16

	Krzysztof