Re: [PATCH V5] PCI: rcar: Use runtime PM to control controller clock

[Marek Vasut <marek.vasut@gmail.com>]

On 04/09/2018 10:07 AM, Geert Uytterhoeven wrote:
> Hi Marek,
> 
> On Sun, Apr 8, 2018 at 3:09 PM, Marek Vasut <marek.vasut@gmail.com> wrote:
>> From: Dien Pham <dien.pham.ry@rvc.renesas.com>
>>
>> The controller clock can be switched off during suspend/resume,
>> let runtime PM take care of that.
>>
>> Signed-off-by: Dien Pham <dien.pham.ry@rvc.renesas.com>
>> Signed-off-by: Hien Dang <hien.dang.eb@renesas.com>
>> Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
>> Cc: Geert Uytterhoeven <geert+renesas@glider.be>
>> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
>> Cc: Phil Edworthy <phil.edworthy@renesas.com>
>> Cc: Simon Horman <horms+renesas@verge.net.au>
>> Cc: Wolfram Sang <wsa@the-dreams.de>
>> Cc: linux-renesas-soc@vger.kernel.org
>> To: linux-pci@vger.kernel.org
>> ---
>> V2: - Reorder the fail path in rcar_pcie_probe() to cater for the
>>       reordering of function calls in probe
>>     - Dispose of fail_clk in rcar_pcie_get_resources()
>> V3: - Fix up the failpath in probe function
>> V4: - Rebase on recent linux-next
>> V5: - Do not call pci_free_resource_list(&pcie->resources) if
>>       rcar_pcie_parse_request_of_pci_ranges() fails, since that
>>       functiona calls pci_free_resource_list() already.
> 
> Thanks for the update!
> 
>> --- a/drivers/pci/host/pcie-rcar.c
>> +++ b/drivers/pci/host/pcie-rcar.c
> 
>> @@ -1124,22 +1111,22 @@ static int rcar_pcie_probe(struct platform_device *pdev)
>>         if (err)
>>                 goto err_free_bridge;
>>
>> +       pm_runtime_enable(pcie->dev);
>> +       err = pm_runtime_get_sync(pcie->dev);
>> +       if (err < 0) {
>> +               dev_err(pcie->dev, "pm_runtime_get_sync failed\n");
>> +               goto err_pm_disable;
>> +       }
>> +
> 
> As you moved the pm_runtime setup up...
> 
>>         err = rcar_pcie_get_resources(pcie);
>>         if (err < 0) {
>>                 dev_err(dev, "failed to request resources: %d\n", err);
>> -               goto err_free_resource_list;
>> +               goto err_pm_put;
>>         }
>>
>>         err = rcar_pcie_parse_map_dma_ranges(pcie, dev->of_node);
>>         if (err)
>> -               goto err_free_resource_list;
>> -
>> -       pm_runtime_enable(dev);
>> -       err = pm_runtime_get_sync(dev);
>> -       if (err < 0) {
>> -               dev_err(dev, "pm_runtime_get_sync failed\n");
>> -               goto err_pm_disable;
>> -       }
>> +               goto err_pm_put;
>>
>>         /* Failure to get a link might just be that no cards are inserted */
>>         hw_init_fn = of_device_get_match_data(dev);
>> @@ -1174,9 +1161,8 @@ static int rcar_pcie_probe(struct platform_device *pdev)
>>
>>  err_pm_disable:
>>         pm_runtime_disable(dev);
> 
> ... shouldn't it be moved down here, for symmetry?

I am reasonably certain the failpath should be correct now. Did I still
miss something ?

-- 
Best regards,
Marek Vasut