From: Joao Pinto <Joao.Pinto@synopsys.com>
To: Kishon Vijay Abraham I <kishon@ti.com>,
Bjorn Helgaas <bhelgaas@google.com>,
Jingoo Han <jingoohan1@gmail.com>,
Joao Pinto <Joao.Pinto@synopsys.com>
Cc: devicetree@vger.kernel.org, linux-doc@vger.kernel.org,
linux-pci@vger.kernel.org, nsekhar@ti.com,
linux-kernel@vger.kernel.org, linux-omap@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v2 08/22] PCI: dwc: designware: Add EP mode support
Date: Fri, 17 Feb 2017 17:20:39 +0000 [thread overview]
Message-ID: <45e5288e-d11f-c855-af9b-692a42d878c6@synopsys.com> (raw)
In-Reply-To: <1487325042-28227-9-git-send-email-kishon@ti.com>
=C0s 9:50 AM de 2/17/2017, Kishon Vijay Abraham I escreveu:
> Add endpoint mode support to designware driver. This uses the
> EP Core layer introduced recently to add endpoint mode support.
> *Any* function driver can now use this designware device
> in order to achieve the EP functionality.
> =
> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
> ---
> drivers/pci/dwc/Kconfig | 5 +
> drivers/pci/dwc/Makefile | 1 +
> drivers/pci/dwc/pcie-designware-ep.c | 342 ++++++++++++++++++++++++++++=
++++++
> drivers/pci/dwc/pcie-designware.c | 51 +++++
> drivers/pci/dwc/pcie-designware.h | 72 +++++++
> 5 files changed, 471 insertions(+)
> create mode 100644 drivers/pci/dwc/pcie-designware-ep.c
> =
> diff --git a/drivers/pci/dwc/Kconfig b/drivers/pci/dwc/Kconfig
> index dfb8a69..00335c7 100644
> --- a/drivers/pci/dwc/Kconfig
> +++ b/drivers/pci/dwc/Kconfig
> @@ -9,6 +9,11 @@ config PCIE_DW_HOST
> depends on PCI_MSI_IRQ_DOMAIN
> select PCIE_DW
> =
> +config PCIE_DW_EP
> + bool
> + depends on PCI_ENDPOINT
> + select PCIE_DW
> +
> config PCI_DRA7XX
> bool "TI DRA7xx PCIe controller"
> depends on PCI
> diff --git a/drivers/pci/dwc/Makefile b/drivers/pci/dwc/Makefile
> index a2df13c..b38425d 100644
> --- a/drivers/pci/dwc/Makefile
> +++ b/drivers/pci/dwc/Makefile
> @@ -1,5 +1,6 @@
> obj-$(CONFIG_PCIE_DW) +=3D pcie-designware.o
> obj-$(CONFIG_PCIE_DW_HOST) +=3D pcie-designware-host.o
> +obj-$(CONFIG_PCIE_DW_EP) +=3D pcie-designware-ep.o
> obj-$(CONFIG_PCIE_DW_PLAT) +=3D pcie-designware-plat.o
> obj-$(CONFIG_PCI_DRA7XX) +=3D pci-dra7xx.o
> obj-$(CONFIG_PCI_EXYNOS) +=3D pci-exynos.o
> diff --git a/drivers/pci/dwc/pcie-designware-ep.c b/drivers/pci/dwc/pcie-=
designware-ep.c
> new file mode 100644
> index 0000000..e465c5e
> --- /dev/null
> +++ b/drivers/pci/dwc/pcie-designware-ep.c
> @@ -0,0 +1,342 @@
> +/**
> + * Synopsys Designware PCIe Endpoint controller driver
> + *
> + * Copyright (C) 2017 Texas Instruments
> + * Author: Kishon Vijay Abraham I <kishon@ti.com>
> + *
> + * This program is free software: you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 of
> + * the License as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program. If not, see <https://urldefense.proofpoint.=
com/v2/url?u=3Dhttp-3A__www.gnu.org_licenses_&d=3DDwIBAg&c=3DDPL6_X_6JkXFx7=
AXWqB0tg&r=3Ds2fO0hii0OGNOv9qQy_HRXy-xAJUD1NNoEcc3io_kx0&m=3DWif-q5OZ-YZwRC=
xX1bBAl5itP28aoQ8Fv7NmxvWSvyg&s=3DN2kaSPkx7uqpiP9O357WPoXruWEiOzF6AhCVChKmd=
xc&e=3D >.
> + */
> +
> +#include <linux/of.h>
> +
> +#include "pcie-designware.h"
> +#include <linux/pci-epc.h>
> +#include <linux/pci-epf.h>
> +
> +void dw_pcie_ep_linkup(struct dw_pcie_ep *ep)
> +{
> + struct pci_epc *epc =3D ep->epc;
> + struct pci_epf *epf;
> +
> + list_for_each_entry(epf, &epc->pci_epf, list)
> + pci_epf_linkup(epf);
> +}
> +
> +static void dw_pcie_ep_reset_bar(struct dw_pcie *pci, enum pci_barno bar)
> +{
> + u32 reg;
> +
> + reg =3D PCI_BASE_ADDRESS_0 + (4 * bar);
> + dw_pcie_write_dbi(pci, pci->dbi_base2, reg, 0x4, 0x0);
> + dw_pcie_write_dbi(pci, pci->dbi_base, reg, 0x4, 0x0);
> +}
> +
> +static int dw_pcie_ep_write_header(struct pci_epc *epc,
> + struct pci_epf_header *hdr)
> +{
> + struct dw_pcie_ep *ep =3D epc_get_drvdata(epc);
> + struct dw_pcie *pci =3D to_dw_pcie_from_ep(ep);
> + void __iomem *base =3D pci->dbi_base;
> +
> + dw_pcie_write_dbi(pci, base, PCI_VENDOR_ID, 0x2, hdr->vendorid);
> + dw_pcie_write_dbi(pci, base, PCI_DEVICE_ID, 0x2, hdr->deviceid);
> + dw_pcie_write_dbi(pci, base, PCI_REVISION_ID, 0x1, hdr->revid);
> + dw_pcie_write_dbi(pci, base, PCI_CLASS_PROG, 0x1, hdr->progif_code);
> + dw_pcie_write_dbi(pci, base, PCI_CLASS_DEVICE, 0x2,
> + hdr->subclass_code | hdr->baseclass_code << 8);
> + dw_pcie_write_dbi(pci, base, PCI_CACHE_LINE_SIZE, 0x1,
> + hdr->cache_line_size);
> + dw_pcie_write_dbi(pci, base, PCI_SUBSYSTEM_VENDOR_ID, 0x2,
> + hdr->subsys_vendor_id);
> + dw_pcie_write_dbi(pci, base, PCI_SUBSYSTEM_ID, 0x2, hdr->subsys_id);
> + dw_pcie_write_dbi(pci, base, PCI_INTERRUPT_PIN, 0x1,
> + hdr->interrupt_pin);
> +
> + return 0;
> +}
> +
> +static int dw_pcie_ep_inbound_atu(struct dw_pcie_ep *ep, enum pci_barno =
bar,
> + dma_addr_t cpu_addr,
> + enum dw_pcie_as_type as_type)
> +{
> + int ret;
> + u32 free_win;
> + struct dw_pcie *pci =3D to_dw_pcie_from_ep(ep);
> +
> + free_win =3D find_first_zero_bit(&ep->ib_window_map,
> + sizeof(ep->ib_window_map));
> + if (free_win >=3D ep->num_ib_windows) {
> + dev_err(pci->dev, "no free inbound window\n");
> + return -EINVAL;
> + }
> +
> + ret =3D dw_pcie_prog_inbound_atu(pci, free_win, bar, cpu_addr,
> + as_type);
> + if (ret < 0) {
> + dev_err(pci->dev, "Failed to program IB window\n");
> + return ret;
> + }
> +
> + ep->bar_to_atu[bar] =3D free_win;
> + set_bit(free_win, &ep->ib_window_map);
> +
> + return 0;
> +}
> +
> +static int dw_pcie_ep_outbound_atu(struct dw_pcie_ep *ep, phys_addr_t ph=
ys_addr,
> + u64 pci_addr, size_t size)
> +{
> + u32 free_win;
> + struct dw_pcie *pci =3D to_dw_pcie_from_ep(ep);
> +
> + free_win =3D find_first_zero_bit(&ep->ob_window_map,
> + sizeof(ep->ob_window_map));
> + if (free_win >=3D ep->num_ob_windows) {
> + dev_err(pci->dev, "no free outbound window\n");
> + return -EINVAL;
> + }
> +
> + dw_pcie_prog_outbound_atu(pci, free_win, PCIE_ATU_TYPE_MEM,
> + phys_addr, pci_addr, size);
> +
> + set_bit(free_win, &ep->ob_window_map);
> + ep->outbound_addr[free_win] =3D phys_addr;
> +
> + return 0;
> +}
> +
> +static void dw_pcie_ep_clear_bar(struct pci_epc *epc, enum pci_barno bar)
> +{
> + struct dw_pcie_ep *ep =3D epc_get_drvdata(epc);
> + struct dw_pcie *pci =3D to_dw_pcie_from_ep(ep);
> + u32 atu_index =3D ep->bar_to_atu[bar];
> +
> + dw_pcie_ep_reset_bar(pci, bar);
> +
> + dw_pcie_disable_atu(pci, atu_index, DW_PCIE_REGION_INBOUND);
> + clear_bit(atu_index, &ep->ib_window_map);
> +}
> +
> +static int dw_pcie_ep_set_bar(struct pci_epc *epc, enum pci_barno bar,
> + dma_addr_t bar_phys, size_t size, int flags)
> +{
> + int ret;
> + struct dw_pcie_ep *ep =3D epc_get_drvdata(epc);
> + struct dw_pcie *pci =3D to_dw_pcie_from_ep(ep);
> + enum dw_pcie_as_type as_type;
> + u32 reg =3D PCI_BASE_ADDRESS_0 + (4 * bar);
> +
> + if (!(flags & PCI_BASE_ADDRESS_SPACE))
> + as_type =3D DW_PCIE_AS_MEM;
> + else
> + as_type =3D DW_PCIE_AS_IO;
> +
> + ret =3D dw_pcie_ep_inbound_atu(ep, bar, bar_phys, as_type);
> + if (ret)
> + return ret;
> +
> + dw_pcie_write_dbi(pci, pci->dbi_base2, reg, 0x4, size - 1);
> + dw_pcie_write_dbi(pci, pci->dbi_base, reg, 0x4, flags);
> +
> + return 0;
> +}
> +
> +static int dw_pcie_find_index(struct dw_pcie_ep *ep, phys_addr_t addr,
> + u32 *atu_index)
> +{
> + u32 index;
> +
> + for (index =3D 0; index < ep->num_ob_windows; index++) {
> + if (ep->outbound_addr[index] !=3D addr)
> + continue;
> + *atu_index =3D index;
> + return 0;
> + }
> +
> + return -EINVAL;
> +}
> +
> +static void dw_pcie_ep_unmap_addr(struct pci_epc *epc, phys_addr_t addr)
> +{
> + int ret;
> + u32 atu_index;
> + struct dw_pcie_ep *ep =3D epc_get_drvdata(epc);
> + struct dw_pcie *pci =3D to_dw_pcie_from_ep(ep);
> +
> + ret =3D dw_pcie_find_index(ep, addr, &atu_index);
> + if (ret < 0)
> + return;
> +
> + dw_pcie_disable_atu(pci, atu_index, DW_PCIE_REGION_OUTBOUND);
> + clear_bit(atu_index, &ep->ob_window_map);
> +}
> +
> +static int dw_pcie_ep_map_addr(struct pci_epc *epc, phys_addr_t addr,
> + u64 pci_addr, size_t size)
> +{
> + int ret;
> + struct dw_pcie_ep *ep =3D epc_get_drvdata(epc);
> + struct dw_pcie *pci =3D to_dw_pcie_from_ep(ep);
> +
> + ret =3D dw_pcie_ep_outbound_atu(ep, addr, pci_addr, size);
> + if (ret) {
> + dev_err(pci->dev, "failed to enable address\n");
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +static int dw_pcie_ep_get_msi(struct pci_epc *epc)
> +{
> + int val;
> + u32 lower_addr;
> + u32 upper_addr;
> + struct dw_pcie_ep *ep =3D epc_get_drvdata(epc);
> + struct dw_pcie *pci =3D to_dw_pcie_from_ep(ep);
> +
> + val =3D dw_pcie_read_dbi(pci, pci->dbi_base, MSI_MESSAGE_CONTROL, 0x2);
> + val =3D (val & MSI_CAP_MME_MASK) >> MSI_CAP_MME_SHIFT;
> +
> + lower_addr =3D dw_pcie_read_dbi(pci, pci->dbi_base, MSI_MESSAGE_ADDR_L3=
2,
> + 0x4);
> + upper_addr =3D dw_pcie_read_dbi(pci, pci->dbi_base, MSI_MESSAGE_ADDR_U3=
2,
> + 0x4);
> +
> + if (!(lower_addr || upper_addr))
> + return -EINVAL;
> +
> + return val;
> +}
> +
> +static int dw_pcie_ep_set_msi(struct pci_epc *epc, u8 encode_int)
> +{
> + int val;
> + struct dw_pcie_ep *ep =3D epc_get_drvdata(epc);
> + struct dw_pcie *pci =3D to_dw_pcie_from_ep(ep);
> +
> + val =3D (encode_int << MSI_CAP_MMC_SHIFT);
> + dw_pcie_write_dbi(pci, pci->dbi_base, MSI_MESSAGE_CONTROL, 0x2, val);
> +
> + return 0;
> +}
> +
> +static int dw_pcie_ep_raise_irq(struct pci_epc *epc,
> + enum pci_epc_irq_type type, u8 interrupt_num)
> +{
> + struct dw_pcie_ep *ep =3D epc_get_drvdata(epc);
> +
> + if (!ep->ops->raise_irq)
> + return -EINVAL;
> +
> + return ep->ops->raise_irq(ep, type, interrupt_num);
> +}
> +
> +static void dw_pcie_ep_stop(struct pci_epc *epc)
> +{
> + struct dw_pcie_ep *ep =3D epc_get_drvdata(epc);
> + struct dw_pcie *pci =3D to_dw_pcie_from_ep(ep);
> +
> + if (!pci->ops->stop_link)
> + return;
> +
> + pci->ops->stop_link(pci);
> +}
> +
> +static int dw_pcie_ep_start(struct pci_epc *epc)
> +{
> + struct dw_pcie_ep *ep =3D epc_get_drvdata(epc);
> + struct dw_pcie *pci =3D to_dw_pcie_from_ep(ep);
> +
> + if (!pci->ops->start_link)
> + return -EINVAL;
> +
> + return pci->ops->start_link(pci);
> +}
> +
> +static const struct pci_epc_ops epc_ops =3D {
> + .write_header =3D dw_pcie_ep_write_header,
> + .set_bar =3D dw_pcie_ep_set_bar,
> + .clear_bar =3D dw_pcie_ep_clear_bar,
> + .map_addr =3D dw_pcie_ep_map_addr,
> + .unmap_addr =3D dw_pcie_ep_unmap_addr,
> + .set_msi =3D dw_pcie_ep_set_msi,
> + .get_msi =3D dw_pcie_ep_get_msi,
> + .raise_irq =3D dw_pcie_ep_raise_irq,
> + .start =3D dw_pcie_ep_start,
> + .stop =3D dw_pcie_ep_stop,
> +};
> +
> +void dw_pcie_ep_exit(struct dw_pcie_ep *ep)
> +{
> + struct pci_epc *epc =3D ep->epc;
> +
> + pci_epc_mem_exit(epc);
> +}
> +
> +int dw_pcie_ep_init(struct dw_pcie_ep *ep)
> +{
> + int ret;
> + void *addr;
> + enum pci_barno bar;
> + struct pci_epc *epc;
> + struct dw_pcie *pci =3D to_dw_pcie_from_ep(ep);
> + struct device *dev =3D pci->dev;
> + struct device_node *np =3D dev->of_node;
> +
> + ret =3D of_property_read_u32(np, "num-ib-windows", &ep->num_ib_windows);
> + if (ret < 0) {
> + dev_err(dev, "unable to read *num-ib-windows* property\n");
> + return ret;
> + }
> +
> + ret =3D of_property_read_u32(np, "num-ob-windows", &ep->num_ob_windows);
> + if (ret < 0) {
> + dev_err(dev, "unable to read *num-ob-windows* property\n");
> + return ret;
> + }
> +
> + addr =3D devm_kzalloc(dev, sizeof(phys_addr_t) * ep->num_ob_windows,
> + GFP_KERNEL);
> + if (!addr)
> + return -ENOMEM;
> + ep->outbound_addr =3D addr;
> +
> + for (bar =3D BAR_0; bar <=3D BAR_5; bar++)
> + dw_pcie_ep_reset_bar(pci, bar);
> +
> + if (ep->ops->ep_init)
> + ep->ops->ep_init(ep);
> +
> + epc =3D devm_pci_epc_create(dev, &epc_ops);
> + if (IS_ERR(epc)) {
> + dev_err(dev, "failed to create epc device\n");
> + return PTR_ERR(epc);
> + }
> +
> + ret =3D of_property_read_u8(np, "max-functions", &epc->max_functions);
> + if (ret < 0)
> + epc->max_functions =3D 1;
> +
> + ret =3D pci_epc_mem_init(epc, ep->phys_base, ep->addr_size);
> + if (ret < 0) {
> + dev_err(dev, "Failed to initialize address space\n");
> + return ret;
> + }
> +
> + ep->epc =3D epc;
> + epc_set_drvdata(epc, ep);
> + dw_pcie_setup(pci);
> +
> + return 0;
> +}
> diff --git a/drivers/pci/dwc/pcie-designware.c b/drivers/pci/dwc/pcie-des=
ignware.c
> index 686945d..49b28c8 100644
> --- a/drivers/pci/dwc/pcie-designware.c
> +++ b/drivers/pci/dwc/pcie-designware.c
> @@ -173,6 +173,57 @@ void dw_pcie_prog_outbound_atu(struct dw_pcie *pci, =
int index, int type,
> dev_err(pci->dev, "iATU is not being enabled\n");
> }
> =
> +int dw_pcie_prog_inbound_atu(struct dw_pcie *pci, int index, int bar,
> + u64 cpu_addr, enum dw_pcie_as_type as_type)
> +{
> + int type;
> + void __iomem *base =3D pci->dbi_base;
> +
> + dw_pcie_write_dbi(pci, base, PCIE_ATU_VIEWPORT, 0x4,
> + PCIE_ATU_REGION_INBOUND | index);
> + dw_pcie_write_dbi(pci, base, PCIE_ATU_LOWER_TARGET, 0x4,
> + lower_32_bits(cpu_addr));
> + dw_pcie_write_dbi(pci, base, PCIE_ATU_UPPER_TARGET, 0x4,
> + upper_32_bits(cpu_addr));
> +
> + switch (as_type) {
> + case DW_PCIE_AS_MEM:
> + type =3D PCIE_ATU_TYPE_MEM;
> + break;
> + case DW_PCIE_AS_IO:
> + type =3D PCIE_ATU_TYPE_IO;
> + break;
> + default:
> + return -EINVAL;
> + }
> +
> + dw_pcie_write_dbi(pci, base, PCIE_ATU_CR1, 0x4, type);
> + dw_pcie_write_dbi(pci, base, PCIE_ATU_CR2, 0x4, PCIE_ATU_ENABLE |
> + PCIE_ATU_BAR_MODE_ENABLE | (bar << 8));
> + return 0;
> +}
> +
This Atu programming is for PCI Cores <=3D 4.70. Please follow the same app=
roach as:
https://git.kernel.org/cgit/linux/kernel/git/helgaas/pci.git/tree/drivers/p=
ci/dwc/pcie-designware.c?h=3Dpci/host-designware#n95
> +void dw_pcie_disable_atu(struct dw_pcie *pci, int index,
> + enum dw_pcie_region_type type)
> +{
> + int region;
> + void __iomem *base =3D pci->dbi_base;
> +
> + switch (type) {
> + case DW_PCIE_REGION_INBOUND:
> + region =3D PCIE_ATU_REGION_INBOUND;
> + break;
> + case DW_PCIE_REGION_OUTBOUND:
> + region =3D PCIE_ATU_REGION_OUTBOUND;
> + break;
> + default:
> + return;
> + }
> +
> + dw_pcie_write_dbi(pci, base, PCIE_ATU_VIEWPORT, 0x4, region | index);
> + dw_pcie_write_dbi(pci, base, PCIE_ATU_CR2, 0x4, ~PCIE_ATU_ENABLE);
> +}
> +
> int dw_pcie_wait_for_link(struct dw_pcie *pci)
> {
> int retries;
> diff --git a/drivers/pci/dwc/pcie-designware.h b/drivers/pci/dwc/pcie-des=
ignware.h
> index 0ef6ae7..7476234 100644
> --- a/drivers/pci/dwc/pcie-designware.h
> +++ b/drivers/pci/dwc/pcie-designware.h
> @@ -18,6 +18,9 @@
> #include <linux/msi.h>
> #include <linux/pci.h>
> =
> +#include <linux/pci-epc.h>
> +#include <linux/pci-epf.h>
> +
> /* Parameters for the waiting for link up routine */
> #define LINK_WAIT_MAX_RETRIES 10
> #define LINK_WAIT_USLEEP_MIN 90000
> @@ -89,6 +92,13 @@
> #define PCIE_GET_ATU_OUTB_UNR_REG_OFFSET(region) \
> ((0x3 << 20) | ((region) << 9))
> =
> +#define MSI_MESSAGE_CONTROL 0x52
> +#define MSI_CAP_MMC_SHIFT 1
> +#define MSI_CAP_MME_SHIFT 4
> +#define MSI_CAP_MME_MASK (7 << MSI_CAP_MME_SHIFT)
> +#define MSI_MESSAGE_ADDR_L32 0x54
> +#define MSI_MESSAGE_ADDR_U32 0x58
> +
> /*
> * Maximum number of MSI IRQs can be 256 per controller. But keep
> * it 32 as of now. Probably we will never need more than 32. If needed,
> @@ -99,6 +109,13 @@
> =
> struct pcie_port;
> struct dw_pcie;
> +struct dw_pcie_ep;
> +
> +enum dw_pcie_region_type {
> + DW_PCIE_REGION_UNKNOWN,
> + DW_PCIE_REGION_INBOUND,
> + DW_PCIE_REGION_OUTBOUND,
> +};
> =
> struct dw_pcie_host_ops {
> int (*rd_own_conf)(struct pcie_port *pp, int where, int size, u32 *val);
> @@ -142,6 +159,31 @@ struct pcie_port {
> DECLARE_BITMAP(msi_irq_in_use, MAX_MSI_IRQS);
> };
> =
> +enum dw_pcie_as_type {
> + DW_PCIE_AS_UNKNOWN,
> + DW_PCIE_AS_MEM,
> + DW_PCIE_AS_IO,
> +};
> +
> +struct dw_pcie_ep_ops {
> + void (*ep_init)(struct dw_pcie_ep *ep);
> + int (*raise_irq)(struct dw_pcie_ep *ep, enum pci_epc_irq_type type,
> + u8 interrupt_num);
> +};
> +
> +struct dw_pcie_ep {
> + struct pci_epc *epc;
> + struct dw_pcie_ep_ops *ops;
> + phys_addr_t phys_base;
> + size_t addr_size;
> + u8 bar_to_atu[6];
> + phys_addr_t *outbound_addr;
> + unsigned long ib_window_map;
> + unsigned long ob_window_map;
> + u32 num_ib_windows;
> + u32 num_ob_windows;
> +};
> +
> struct dw_pcie_ops {
> u64 (*cpu_addr_fixup)(u64 cpu_addr);
> u32 (*read_dbi)(struct dw_pcie *pcie, void __iomem *base, u32 reg,
> @@ -149,19 +191,26 @@ struct dw_pcie_ops {
> void (*write_dbi)(struct dw_pcie *pcie, void __iomem *base, u32 reg,
> int size, u32 val);
> int (*link_up)(struct dw_pcie *pcie);
> + int (*start_link)(struct dw_pcie *pcie);
> + void (*stop_link)(struct dw_pcie *pcie);
> };
> =
> struct dw_pcie {
> struct device *dev;
> void __iomem *dbi_base;
> + void __iomem *dbi_base2;
> u32 num_viewport;
> u8 iatu_unroll_enabled;
> struct pcie_port pp;
> + struct dw_pcie_ep ep;
> const struct dw_pcie_ops *ops;
> };
> =
> #define to_dw_pcie_from_pp(port) container_of((port), struct dw_pcie, pp)
> =
> +#define to_dw_pcie_from_ep(endpoint) \
> + container_of((endpoint), struct dw_pcie, ep)
> +
> int dw_pcie_read(void __iomem *addr, int size, u32 *val);
> int dw_pcie_write(void __iomem *addr, int size, u32 val);
> =
> @@ -174,6 +223,10 @@ void dw_pcie_write_dbi(struct dw_pcie *pci, void __i=
omem *base, u32 reg,
> void dw_pcie_prog_outbound_atu(struct dw_pcie *pci, int index,
> int type, u64 cpu_addr, u64 pci_addr,
> u32 size);
> +int dw_pcie_prog_inbound_atu(struct dw_pcie *pci, int index, int bar,
> + u64 cpu_addr, enum dw_pcie_as_type as_type);
> +void dw_pcie_disable_atu(struct dw_pcie *pci, int index,
> + enum dw_pcie_region_type type);
> void dw_pcie_setup(struct dw_pcie *pci);
> =
> #ifdef CONFIG_PCIE_DW_HOST
> @@ -200,4 +253,23 @@ static inline int dw_pcie_host_init(struct pcie_port=
*pp)
> return 0;
> }
> #endif
> +
> +#ifdef CONFIG_PCIE_DW_EP
> +void dw_pcie_ep_linkup(struct dw_pcie_ep *ep);
> +int dw_pcie_ep_init(struct dw_pcie_ep *ep);
> +void dw_pcie_ep_exit(struct dw_pcie_ep *ep);
> +#else
> +static inline void dw_pcie_ep_linkup(struct dw_pcie_ep *ep)
> +{
> +}
> +
> +static inline int dw_pcie_ep_init(struct dw_pcie_ep *ep)
> +{
> + return 0;
> +}
> +
> +static inline void dw_pcie_ep_exit(struct dw_pcie_ep *ep)
> +{
> +}
> +#endif
> #endif /* _PCIE_DESIGNWARE_H */
> =
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2017-02-17 17:20 UTC|newest]
Thread overview: 49+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-02-17 9:50 [PATCH v2 00/22] PCI: Support for configurable PCI endpoint Kishon Vijay Abraham I
2017-02-17 9:50 ` [PATCH v2 01/22] PCI: endpoint: Add EP core layer to enable EP controller and EP functions Kishon Vijay Abraham I
2017-02-17 11:26 ` Joao Pinto
2017-02-17 11:37 ` Kishon Vijay Abraham I
2017-02-17 11:39 ` Joao Pinto
2017-02-17 9:50 ` [PATCH v2 02/22] Documentation: PCI: Guide to use PCI Endpoint Core Layer Kishon Vijay Abraham I
2017-02-17 11:43 ` Joao Pinto
2017-02-17 9:50 ` [PATCH v2 03/22] PCI: endpoint: Introduce configfs entry for configuring EP functions Kishon Vijay Abraham I
2017-02-17 12:01 ` Kishon Vijay Abraham I
2017-02-17 17:04 ` Christoph Hellwig
2017-03-06 9:41 ` Kishon Vijay Abraham I
2017-02-17 9:50 ` [PATCH v2 04/22] Documentation: PCI: Guide to use pci endpoint configfs Kishon Vijay Abraham I
2017-02-17 13:05 ` Joao Pinto
2017-02-17 17:15 ` Christoph Hellwig
2017-03-06 10:16 ` Kishon Vijay Abraham I
2017-02-17 9:50 ` [PATCH v2 05/22] Documentation: PCI: Add specification for the *pci test* function device Kishon Vijay Abraham I
2017-02-17 9:50 ` [PATCH v2 06/22] PCI: endpoint: functions: Add an EP function to test PCI Kishon Vijay Abraham I
2017-02-17 9:50 ` [PATCH v2 07/22] Documentation: PCI: Add binding documentation for pci-test endpoint function Kishon Vijay Abraham I
2017-02-17 9:50 ` [PATCH v2 08/22] PCI: dwc: designware: Add EP mode support Kishon Vijay Abraham I
2017-02-17 13:15 ` Kishon Vijay Abraham I
2017-02-17 17:20 ` Joao Pinto [this message]
2017-03-06 9:55 ` Kishon Vijay Abraham I
2017-03-07 5:18 ` Kishon Vijay Abraham I
2017-03-07 11:10 ` Joao Pinto
2017-03-08 11:32 ` Joao Pinto
2017-03-08 11:35 ` Kishon Vijay Abraham I
2017-03-08 11:37 ` Joao Pinto
2017-03-08 13:31 ` Kishon Vijay Abraham I
2017-03-08 15:32 ` Joao Pinto
2017-03-08 15:33 ` Joao Pinto
2017-03-08 19:14 ` Christoph Hellwig
2017-03-09 11:55 ` Joao Pinto
2017-02-17 9:50 ` [PATCH v2 09/22] dt-bindings: PCI: Add dt bindings for pci designware EP mode Kishon Vijay Abraham I
2017-02-17 9:50 ` [PATCH v2 10/22] PCI: dwc: dra7xx: Facilitate wrapper and msi interrupts to be enabled independently Kishon Vijay Abraham I
2017-02-17 9:50 ` [PATCH v2 11/22] PCI: dwc: dra7xx: Add EP mode support Kishon Vijay Abraham I
2017-02-17 9:50 ` [PATCH v2 12/22] dt-bindings: PCI: dra7xx: Add dt bindings for pci dra7xx EP mode Kishon Vijay Abraham I
2017-02-17 9:50 ` [PATCH v2 13/22] PCI: dwc: dra7xx: Workaround for errata id i870 Kishon Vijay Abraham I
2017-02-17 9:50 ` [PATCH v2 14/22] dt-bindings: PCI: dra7xx: Add dt bindings to enable legacy mode Kishon Vijay Abraham I
2017-02-27 16:40 ` Rob Herring
2017-02-28 3:28 ` Kishon Vijay Abraham I
2017-03-06 9:56 ` Kishon Vijay Abraham I
2017-02-17 9:50 ` [PATCH v2 15/22] PCI: Add device IDs for DRA74x and DRA72x Kishon Vijay Abraham I
2017-02-17 9:50 ` [PATCH v2 16/22] misc: Add host side pci driver for pci test function device Kishon Vijay Abraham I
2017-02-17 9:50 ` [PATCH v2 17/22] Documentation: misc-devices: Add Documentation for pci-endpoint-test driver Kishon Vijay Abraham I
2017-02-17 9:50 ` [PATCH v2 18/22] tools: PCI: Add a userspace tool to test PCI endpoint Kishon Vijay Abraham I
2017-02-17 9:50 ` [PATCH v2 19/22] tools: PCI: Add sample test script to invoke pcitest Kishon Vijay Abraham I
2017-02-17 9:50 ` [PATCH v2 20/22] Documentation: PCI: Add userguide for PCI endpoint test function Kishon Vijay Abraham I
2017-02-17 9:50 ` [PATCH v2 21/22] MAINTAINERS: add PCI EP maintainer Kishon Vijay Abraham I
2017-02-17 9:50 ` [PATCH v2 22/22] ARM: DRA7: clockdomain: Change the CLKTRCTRL of CM_PCIE_CLKSTCTRL to SW_WKUP Kishon Vijay Abraham I
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=45e5288e-d11f-c855-af9b-692a42d878c6@synopsys.com \
--to=joao.pinto@synopsys.com \
--cc=bhelgaas@google.com \
--cc=devicetree@vger.kernel.org \
--cc=jingoohan1@gmail.com \
--cc=kishon@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-doc@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=nsekhar@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).