Re: [PATCH v4 09/12] dt-bindings: PCI: qcom: Add SM8550 compatible

[Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>]

On 23/01/2023 11:44, Abel Vesa wrote:
> On 23-01-22 15:10:59, Krzysztof Kozlowski wrote:
>> On 19/01/2023 15:04, Abel Vesa wrote:
>>> Add the SM8550 platform to the binding.
>>>
>>> Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
>>> ---
>>>
>>> The v3 of this patchset is:
>>> https://lore.kernel.org/all/20230119112453.3393911-1-abel.vesa@linaro.org/
>>>
>>> Changes since v3:
>>>  * renamed noc_aggr to noc_aggr_4, as found in the driver
>>>
>>> Changes since v2:
>>>  * dropped the pipe from clock-names
>>>  * removed the pcie instance number from aggre clock-names comment
>>>  * renamed aggre clock-names to noc_aggr
>>>  * dropped the _pcie infix from cnoc_pcie_sf_axi
>>>  * renamed pcie_1_link_down_reset to simply link_down
>>>  * added enable-gpios back, since pcie1 node will use it
>>>
>>> Changes since v1:
>>>  * Switched to single compatible for both PCIes (qcom,pcie-sm8550)
>>>  * dropped enable-gpios property
>>>  * dropped interconnects related properties, the power-domains
>>>  * properties
>>>    and resets related properties the sm8550 specific allOf:if:then
>>>  * dropped pipe_mux, phy_pipe and ref clocks from the sm8550 specific
>>>    allOf:if:then clock-names array and decreased the minItems and
>>>    maxItems for clocks property accordingly
>>>  * added "minItems: 1" to interconnects, since sm8550 pcie uses just
>>>  * one,
>>>    same for interconnect-names
>>>
>>>
>>>  .../devicetree/bindings/pci/qcom,pcie.yaml    | 44 +++++++++++++++++++
>>>  1 file changed, 44 insertions(+)
>>>
>>> diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie.yaml
>>> index a5859bb3dc28..58f926666332 100644
>>> --- a/Documentation/devicetree/bindings/pci/qcom,pcie.yaml
>>> +++ b/Documentation/devicetree/bindings/pci/qcom,pcie.yaml
>>> @@ -34,6 +34,7 @@ properties:
>>>        - qcom,pcie-sm8250
>>>        - qcom,pcie-sm8450-pcie0
>>>        - qcom,pcie-sm8450-pcie1
>>> +      - qcom,pcie-sm8550
>>>        - qcom,pcie-ipq6018
>>>  
>>>    reg:
>>> @@ -65,9 +66,11 @@ properties:
>>>    dma-coherent: true
>>>  
>>>    interconnects:
>>> +    minItems: 1
>>>      maxItems: 2
>>>  
>>
>> I don't see my concerns from v3 answered.
> 
> Check the dates for v4 and your reply to v3.
> 
> v4 was sent a day before you sent your v3 comments. :)
> 
>>
>> This is a friendly reminder during the review process.
>>
>> It seems my previous comments were not fully addressed. Maybe my
>> feedback got lost between the quotes, maybe you just forgot to apply it.
>> Please go back to the previous discussion and either implement all
>> requested changes or keep discussing them.
> 
> Will address your comments in next version.

Ah, then ok :)

Best regards,
Krzysztof