linux-pci.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
To: bhelgaas@google.com, lorenzo.pieralisi@arm.com,
	Joao.Pinto@synopsys.com, jingoohan1@gmail.com, kishon@ti.com,
	adouglas@cadence.com, jesper.nilsson@axis.com
Cc: linux-pci@vger.kernel.org, linux-doc@vger.kernel.org,
	linux-kernel@vger.kernel.org, gustavo.pimentel@synopsys.com
Subject: [PATCH 01/10] PCI: endpoint: Add MSI-X interfaces
Date: Fri, 27 Apr 2018 17:57:38 +0100	[thread overview]
Message-ID: <52506677a350a3e37ba604bcbf00bba885192094.1524845816.git.gustavo.pimentel@synopsys.com> (raw)
In-Reply-To: <cover.1524845816.git.gustavo.pimentel@synopsys.com>
In-Reply-To: <cover.1524845816.git.gustavo.pimentel@synopsys.com>

Add PCI_EPC_IRQ_MSIX type.

Add MSI-X callbacks signatures to ops structure.

Add sysfs interface for set/get MSI-X capability maximum number.

Signed-off-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
---
 drivers/pci/endpoint/pci-ep-cfs.c   | 24 ++++++++++++++++
 drivers/pci/endpoint/pci-epc-core.c | 57 +++++++++++++++++++++++++++++++++++++
 include/linux/pci-epc.h             | 11 ++++++-
 include/linux/pci-epf.h             |  1 +
 4 files changed, 92 insertions(+), 1 deletion(-)

diff --git a/drivers/pci/endpoint/pci-ep-cfs.c b/drivers/pci/endpoint/pci-ep-cfs.c
index 018ea34..d1288a0 100644
--- a/drivers/pci/endpoint/pci-ep-cfs.c
+++ b/drivers/pci/endpoint/pci-ep-cfs.c
@@ -286,6 +286,28 @@ static ssize_t pci_epf_msi_interrupts_show(struct config_item *item,
 		       to_pci_epf_group(item)->epf->msi_interrupts);
 }
 
+static ssize_t pci_epf_msix_interrupts_store(struct config_item *item,
+					     const char *page, size_t len)
+{
+	u16 val;
+	int ret;
+
+	ret = kstrtou16(page, 0, &val);
+	if (ret)
+		return ret;
+
+	to_pci_epf_group(item)->epf->msix_interrupts = val;
+
+	return len;
+}
+
+static ssize_t pci_epf_msix_interrupts_show(struct config_item *item,
+					    char *page)
+{
+	return sprintf(page, "%d\n",
+		       to_pci_epf_group(item)->epf->msix_interrupts);
+}
+
 PCI_EPF_HEADER_R(vendorid)
 PCI_EPF_HEADER_W_u16(vendorid)
 
@@ -327,6 +349,7 @@ CONFIGFS_ATTR(pci_epf_, subsys_vendor_id);
 CONFIGFS_ATTR(pci_epf_, subsys_id);
 CONFIGFS_ATTR(pci_epf_, interrupt_pin);
 CONFIGFS_ATTR(pci_epf_, msi_interrupts);
+CONFIGFS_ATTR(pci_epf_, msix_interrupts);
 
 static struct configfs_attribute *pci_epf_attrs[] = {
 	&pci_epf_attr_vendorid,
@@ -340,6 +363,7 @@ static struct configfs_attribute *pci_epf_attrs[] = {
 	&pci_epf_attr_subsys_id,
 	&pci_epf_attr_interrupt_pin,
 	&pci_epf_attr_msi_interrupts,
+	&pci_epf_attr_msix_interrupts,
 	NULL,
 };
 
diff --git a/drivers/pci/endpoint/pci-epc-core.c b/drivers/pci/endpoint/pci-epc-core.c
index b0ee427..7d77bd0 100644
--- a/drivers/pci/endpoint/pci-epc-core.c
+++ b/drivers/pci/endpoint/pci-epc-core.c
@@ -218,6 +218,63 @@ int pci_epc_set_msi(struct pci_epc *epc, u8 func_no, u8 interrupts)
 EXPORT_SYMBOL_GPL(pci_epc_set_msi);
 
 /**
+ * pci_epc_get_msix() - get the number of MSI-X interrupt numbers allocated
+ * @epc: the EPC device to which MSI-X interrupts was requested
+ * @func_no: the endpoint function number in the EPC device
+ *
+ * Invoke to get the number of MSI-X interrupts allocated by the RC
+ */
+int pci_epc_get_msix(struct pci_epc *epc, u8 func_no)
+{
+	int interrupt;
+	unsigned long flags;
+
+	if (IS_ERR_OR_NULL(epc) || func_no >= epc->max_functions)
+		return 0;
+
+	if (!epc->ops->get_msix)
+		return 0;
+
+	spin_lock_irqsave(&epc->lock, flags);
+	interrupt = epc->ops->get_msix(epc, func_no);
+	spin_unlock_irqrestore(&epc->lock, flags);
+
+	if (interrupt < 0)
+		return 0;
+
+	return interrupt + 1;
+}
+EXPORT_SYMBOL_GPL(pci_epc_get_msix);
+
+/**
+ * pci_epc_set_msix() - set the number of MSI-X interrupt numbers required
+ * @epc: the EPC device on which MSI-X has to be configured
+ * @func_no: the endpoint function number in the EPC device
+ * @interrupts: number of MSI-X interrupts required by the EPF
+ *
+ * Invoke to set the required number of MSI-X interrupts.
+ */
+int pci_epc_set_msix(struct pci_epc *epc, u8 func_no, u16 interrupts)
+{
+	int ret;
+	unsigned long flags;
+
+	if (IS_ERR_OR_NULL(epc) || func_no >= epc->max_functions ||
+	    interrupts < 1 || interrupts > 2048)
+		return -EINVAL;
+
+	if (!epc->ops->set_msix)
+		return 0;
+
+	spin_lock_irqsave(&epc->lock, flags);
+	ret = epc->ops->set_msix(epc, func_no, interrupts - 1);
+	spin_unlock_irqrestore(&epc->lock, flags);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(pci_epc_set_msix);
+
+/**
  * pci_epc_unmap_addr() - unmap CPU address from PCI address
  * @epc: the EPC device on which address is allocated
  * @func_no: the endpoint function number in the EPC device
diff --git a/include/linux/pci-epc.h b/include/linux/pci-epc.h
index af657ca..32e8961 100644
--- a/include/linux/pci-epc.h
+++ b/include/linux/pci-epc.h
@@ -17,6 +17,7 @@ enum pci_epc_irq_type {
 	PCI_EPC_IRQ_UNKNOWN,
 	PCI_EPC_IRQ_LEGACY,
 	PCI_EPC_IRQ_MSI,
+	PCI_EPC_IRQ_MSIX,
 };
 
 /**
@@ -30,6 +31,10 @@ enum pci_epc_irq_type {
  *	     capability register
  * @get_msi: ops to get the number of MSI interrupts allocated by the RC from
  *	     the MSI capability register
+ * @set_msix: ops to set the requested number of MSI-X interrupts in the
+ *	     MSI-X capability register
+ * @get_msix: ops to get the number of MSI-X interrupts allocated by the RC
+ *	     from the MSI-X capability register
  * @raise_irq: ops to raise a legacy or MSI interrupt
  * @start: ops to start the PCI link
  * @stop: ops to stop the PCI link
@@ -48,8 +53,10 @@ struct pci_epc_ops {
 			      phys_addr_t addr);
 	int	(*set_msi)(struct pci_epc *epc, u8 func_no, u8 interrupts);
 	int	(*get_msi)(struct pci_epc *epc, u8 func_no);
+	int	(*set_msix)(struct pci_epc *epc, u8 func_no, u16 interrupts);
+	int	(*get_msix)(struct pci_epc *epc, u8 func_no);
 	int	(*raise_irq)(struct pci_epc *epc, u8 func_no,
-			     enum pci_epc_irq_type type, u8 interrupt_num);
+			     enum pci_epc_irq_type type, u16 interrupt_num);
 	int	(*start)(struct pci_epc *epc);
 	void	(*stop)(struct pci_epc *epc);
 	struct module *owner;
@@ -136,6 +143,8 @@ void pci_epc_unmap_addr(struct pci_epc *epc, u8 func_no,
 			phys_addr_t phys_addr);
 int pci_epc_set_msi(struct pci_epc *epc, u8 func_no, u8 interrupts);
 int pci_epc_get_msi(struct pci_epc *epc, u8 func_no);
+int pci_epc_set_msix(struct pci_epc *epc, u8 func_no, u16 interrupts);
+int pci_epc_get_msix(struct pci_epc *epc, u8 func_no);
 int pci_epc_raise_irq(struct pci_epc *epc, u8 func_no,
 		      enum pci_epc_irq_type type, u8 interrupt_num);
 int pci_epc_start(struct pci_epc *epc);
diff --git a/include/linux/pci-epf.h b/include/linux/pci-epf.h
index 4e77649..ec02f587 100644
--- a/include/linux/pci-epf.h
+++ b/include/linux/pci-epf.h
@@ -119,6 +119,7 @@ struct pci_epf {
 	struct pci_epf_header	*header;
 	struct pci_epf_bar	bar[6];
 	u8			msi_interrupts;
+	u16			msix_interrupts;
 	u8			func_no;
 
 	struct pci_epc		*epc;
-- 
2.7.4

  reply	other threads:[~2018-04-27 16:57 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-04-27 16:57 [PATCH 00/10] Add MSI-X support on pcitest tool Gustavo Pimentel
2018-04-27 16:57 ` Gustavo Pimentel [this message]
2018-04-27 16:57 ` [PATCH 02/10] PCI: dwc: Add MSI-X callbacks handler Gustavo Pimentel
2018-04-27 16:57 ` [PATCH 03/10] PCI: cadence: Update cdns_pcie_ep_raise_irq function signature Gustavo Pimentel
2018-04-27 16:57 ` [PATCH 04/10] PCI: dwc: Rework MSI callbacks handler Gustavo Pimentel
2018-04-27 16:57 ` [PATCH 05/10] PCI: dwc: Add legacy interrupt callback handler Gustavo Pimentel
2018-04-27 16:57 ` [PATCH 06/10] misc: pci_endpoint_test: Add MSI-X support Gustavo Pimentel
2018-04-30 15:35   ` Alan Douglas
2018-04-30 16:30     ` Gustavo Pimentel
2018-04-27 16:57 ` [PATCH 07/10] misc: pci_endpoint_test: Replace lower into upper case characters Gustavo Pimentel
2018-04-27 16:57 ` [PATCH 08/10] PCI: endpoint: functions/pci-epf-test: " Gustavo Pimentel
2018-04-27 16:57 ` [PATCH 09/10] tools: PCI: Add MSI-X support Gustavo Pimentel
2018-04-27 16:57 ` [PATCH 10/10] misc: pci_endpoint_test: Use pci_irq_vector function Gustavo Pimentel

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=52506677a350a3e37ba604bcbf00bba885192094.1524845816.git.gustavo.pimentel@synopsys.com \
    --to=gustavo.pimentel@synopsys.com \
    --cc=Joao.Pinto@synopsys.com \
    --cc=adouglas@cadence.com \
    --cc=bhelgaas@google.com \
    --cc=jesper.nilsson@axis.com \
    --cc=jingoohan1@gmail.com \
    --cc=kishon@ti.com \
    --cc=linux-doc@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=lorenzo.pieralisi@arm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).