linux-pci.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Jay Vosburgh <jay.vosburgh@canonical.com>
To: sathyanarayanan.kuppuswamy@linux.intel.com
Cc: bhelgaas@google.com, linux-pci@vger.kernel.org,
	linux-kernel@vger.kernel.org, ashok.raj@intel.com,
	Yicong Yang <yangyicong@hisilicon.com>,
	liudongdong 00290354 <liudongdong3@huawei.com>,
	Linuxarm <linuxarm@huawei.com>
Subject: Re: [PATCH v1 1/1] PCI/ERR: Handle fatal error recovery for non-hotplug capable devices
Date: Tue, 12 May 2020 12:20:30 -0700	[thread overview]
Message-ID: <9908.1589311230@famine> (raw)
In-Reply-To: <f4bbacd3af453285271c8fc733652969e11b84f8.1588821160.git.sathyanarayanan.kuppuswamy@linux.intel.com>

sathyanarayanan.kuppuswamy@linux.intel.com wrote:

>From: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
>
>If there are non-hotplug capable devices connected to a given
>port, then during the fatal error recovery(triggered by DPC or
>AER), after calling reset_link() function, we cannot rely on
>hotplug handler to detach and re-enumerate the device drivers
>in the affected bus. Instead, we will have to let the error
>recovery handler call report_slot_reset() for all devices in
>the bus to notify about the reset operation. Although this is
>only required for non hot-plug capable devices, doing it for
>hotplug capable devices should not affect the functionality.

	Yicong,

	Does the patch below also resolve the issue for you, as with
your changed version of my original patch?

	-J

>Along with above issue, this fix also applicable to following
>issue.
>
>Commit 6d2c89441571 ("PCI/ERR: Update error status after
>reset_link()") added support to store status of reset_link()
>call. Although this fixed the error recovery issue observed if
>the initial value of error status is PCI_ERS_RESULT_DISCONNECT
>or PCI_ERS_RESULT_NO_AER_DRIVER, it also discarded the status
>result from report_frozen_detected. This can cause a failure to
>recover if _NEED_RESET is returned by report_frozen_detected and
>report_slot_reset is not invoked.
>
>Such an event can be induced for testing purposes by reducing the
>Max_Payload_Size of a PCIe bridge to less than that of a device
>downstream from the bridge, and then initiating I/O through the
>device, resulting in oversize transactions.  In the presence of DPC,
>this results in a containment event and attempted reset and recovery
>via pcie_do_recovery.  After 6d2c89441571 report_slot_reset is not
>invoked, and the device does not recover.
>
>[original patch is from jay.vosburgh@canonical.com]
>[original patch link https://lore.kernel.org/linux-pci/18609.1588812972@famine/]
>Fixes: 6d2c89441571 ("PCI/ERR: Update error status after reset_link()")
>Signed-off-by: Jay Vosburgh <jay.vosburgh@canonical.com>
>Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
>---
> drivers/pci/pcie/err.c | 19 +++++++++++++++----
> 1 file changed, 15 insertions(+), 4 deletions(-)
>
>diff --git a/drivers/pci/pcie/err.c b/drivers/pci/pcie/err.c
>index 14bb8f54723e..db80e1ecb2dc 100644
>--- a/drivers/pci/pcie/err.c
>+++ b/drivers/pci/pcie/err.c
>@@ -165,13 +165,24 @@ pci_ers_result_t pcie_do_recovery(struct pci_dev *dev,
> 	pci_dbg(dev, "broadcast error_detected message\n");
> 	if (state == pci_channel_io_frozen) {
> 		pci_walk_bus(bus, report_frozen_detected, &status);
>-		status = reset_link(dev);
>-		if (status != PCI_ERS_RESULT_RECOVERED) {
>+		status = PCI_ERS_RESULT_NEED_RESET;
>+	} else {
>+		pci_walk_bus(bus, report_normal_detected, &status);
>+	}
>+
>+	if (status == PCI_ERS_RESULT_NEED_RESET) {
>+		if (reset_link) {
>+			if (reset_link(dev) != PCI_ERS_RESULT_RECOVERED)
>+				status = PCI_ERS_RESULT_DISCONNECT;
>+		} else {
>+			if (pci_bus_error_reset(dev))
>+				status = PCI_ERS_RESULT_DISCONNECT;
>+		}
>+
>+		if (status == PCI_ERS_RESULT_DISCONNECT) {
> 			pci_warn(dev, "link reset failed\n");
> 			goto failed;
> 		}
>-	} else {
>-		pci_walk_bus(bus, report_normal_detected, &status);
> 	}
> 
> 	if (status == PCI_ERS_RESULT_CAN_RECOVER) {
>-- 
>2.17.1
>

---
	-Jay Vosburgh, jay.vosburgh@canonical.com

  reply	other threads:[~2020-05-12 19:20 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <20200506203249.GA453633@bjorn-Precision-5520>
2020-05-07  0:56 ` [PATCH] PCI/ERR: Resolve regression in pcie_do_recovery Jay Vosburgh
2020-05-07  3:32   ` [PATCH v1 1/1] PCI/ERR: Handle fatal error recovery for non-hotplug capable devices sathyanarayanan.kuppuswamy
2020-05-12 19:20     ` Jay Vosburgh [this message]
2020-05-13  1:50       ` Yicong Yang
2020-05-13 22:44     ` Bjorn Helgaas
2020-05-14 20:36       ` Kuppuswamy, Sathyanarayanan
2020-05-20  8:28     ` Yicong Yang
2020-05-20 17:04       ` Kuppuswamy, Sathyanarayanan
2020-05-21 10:58         ` Yicong Yang
2020-05-21 19:31           ` Kuppuswamy, Sathyanarayanan
2020-05-22  2:56             ` Yicong Yang
2020-05-27  1:31               ` Kuppuswamy, Sathyanarayanan
2020-05-27  3:00                 ` Oliver O'Halloran
2020-05-27  3:06                   ` Kuppuswamy, Sathyanarayanan
2020-05-27  3:35                     ` Oliver O'Halloran
2020-05-27  3:50                 ` Yicong Yang
2020-05-27  4:04                   ` Kuppuswamy, Sathyanarayanan
2020-05-27  6:41                     ` Yicong Yang
2020-05-28  3:57                       ` Kuppuswamy, Sathyanarayanan

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=9908.1589311230@famine \
    --to=jay.vosburgh@canonical.com \
    --cc=ashok.raj@intel.com \
    --cc=bhelgaas@google.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=linuxarm@huawei.com \
    --cc=liudongdong3@huawei.com \
    --cc=sathyanarayanan.kuppuswamy@linux.intel.com \
    --cc=yangyicong@hisilicon.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).