linux-pci.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Kai-Heng Feng <kai.heng.feng@canonical.com>
To: Lu Baolu <baolu.lu@linux.intel.com>
Cc: bhelgaas@google.com, mika.westerberg@linux.intel.com,
	koba.ko@canonical.com, Russell Currey <ruscur@russell.cc>,
	"Oliver O'Halloran" <oohall@gmail.com>,
	Lalithambika Krishnakumar <lalithambika.krishnakumar@intel.com>,
	Joerg Roedel <jroedel@suse.de>,
	linuxppc-dev@lists.ozlabs.org, linux-pci@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2 1/2] PCI/AER: Disable AER service when link is in L2/L3 ready, L2 and L3 state
Date: Thu, 27 Jan 2022 19:14:25 +0800	[thread overview]
Message-ID: <CAAd53p6+KPAJchh9Jx59Fkkj5FidSxsW0yHjLqooFjvu-Y9u7w@mail.gmail.com> (raw)
In-Reply-To: <0259955f-8bbb-1778-f234-398f1356db8b@linux.intel.com>

On Thu, Jan 27, 2022 at 3:01 PM Lu Baolu <baolu.lu@linux.intel.com> wrote:
>
> On 2022/1/27 10:54, Kai-Heng Feng wrote:
> > Commit 50310600ebda ("iommu/vt-d: Enable PCI ACS for platform opt in
> > hint") enables ACS, and some platforms lose its NVMe after resume from
> > S3:
> > [   50.947816] pcieport 0000:00:1b.0: DPC: containment event, status:0x1f01 source:0x0000
> > [   50.947817] pcieport 0000:00:1b.0: DPC: unmasked uncorrectable error detected
> > [   50.947829] pcieport 0000:00:1b.0: PCIe Bus Error: severity=Uncorrected (Non-Fatal), type=Transaction Layer, (Receiver ID)
> > [   50.947830] pcieport 0000:00:1b.0:   device [8086:06ac] error status/mask=00200000/00010000
> > [   50.947831] pcieport 0000:00:1b.0:    [21] ACSViol                (First)
> > [   50.947841] pcieport 0000:00:1b.0: AER: broadcast error_detected message
> > [   50.947843] nvme nvme0: frozen state error detected, reset controller
> >
> > It happens right after ACS gets enabled during resume.
> >
> > There's another case, when Thunderbolt reaches D3cold:
> > [   30.100211] pcieport 0000:00:1d.0: AER: Uncorrected (Non-Fatal) error received: 0000:00:1d.0
> > [   30.100251] pcieport 0000:00:1d.0: PCIe Bus Error: severity=Uncorrected (Non-Fatal), type=Transaction Layer, (Requester ID)
> > [   30.100256] pcieport 0000:00:1d.0:   device [8086:7ab0] error status/mask=00100000/00004000
> > [   30.100262] pcieport 0000:00:1d.0:    [20] UnsupReq               (First)
> > [   30.100267] pcieport 0000:00:1d.0: AER:   TLP Header: 34000000 08000052 00000000 00000000
> > [   30.100372] thunderbolt 0000:0a:00.0: AER: can't recover (no error_detected callback)
> > [   30.100401] xhci_hcd 0000:3e:00.0: AER: can't recover (no error_detected callback)
> > [   30.100427] pcieport 0000:00:1d.0: AER: device recovery failed
> >
> > So disable AER service to avoid the noises from turning power rails
> > on/off when the device is in low power states (D3hot and D3cold), as
> > PCIe spec "5.2 Link State Power Management" states that TLP and DLLP
> > transmission is disabled for a Link in L2/L3 Ready (D3hot), L2 (D3cold
> > with aux power) and L3 (D3cold).
> >
> > Bugzilla:https://bugzilla.kernel.org/show_bug.cgi?id=209149
> > Bugzilla:https://bugzilla.kernel.org/show_bug.cgi?id=215453
> > Fixes: 50310600ebda ("iommu/vt-d: Enable PCI ACS for platform opt in hint")
>
> I don't know what this fix has to do with the commit 50310600ebda.

Commit 50310600ebda only exposed the underlying issue. Do you think
"Fixes:" tag should change to other commits?

> Commit 50310600ebda only makes sure that PCI ACS is enabled whenever
> Intel IOMMU is on. Before this commit, PCI ACS could also be enabled
> and result in the same problem. Or anything I missed?

The system in question didn't enable ACS before commit 50310600ebda.

Kai-Heng

>
> Best regards,
> baolu

  reply	other threads:[~2022-01-27 11:14 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-01-27  2:54 [PATCH v2 1/2] PCI/AER: Disable AER service when link is in L2/L3 ready, L2 and L3 state Kai-Heng Feng
2022-01-27  2:54 ` [PATCH v2 2/2] PCI/DPC: Disable DPC " Kai-Heng Feng
2022-01-27  6:31   ` Mika Westerberg
2022-03-19 20:40   ` Sathyanarayanan Kuppuswamy
2022-01-27  6:30 ` [PATCH v2 1/2] PCI/AER: Disable AER " Mika Westerberg
2022-01-27  7:01 ` Lu Baolu
2022-01-27 11:14   ` Kai-Heng Feng [this message]
2022-01-28  2:53     ` Lu Baolu
2022-01-28  3:29       ` Kai-Heng Feng
2022-03-19 20:38 ` Sathyanarayanan Kuppuswamy
2022-03-21  2:38   ` Kai-Heng Feng
2022-03-21  3:52     ` Sathyanarayanan Kuppuswamy

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=CAAd53p6+KPAJchh9Jx59Fkkj5FidSxsW0yHjLqooFjvu-Y9u7w@mail.gmail.com \
    --to=kai.heng.feng@canonical.com \
    --cc=baolu.lu@linux.intel.com \
    --cc=bhelgaas@google.com \
    --cc=jroedel@suse.de \
    --cc=koba.ko@canonical.com \
    --cc=lalithambika.krishnakumar@intel.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=mika.westerberg@linux.intel.com \
    --cc=oohall@gmail.com \
    --cc=ruscur@russell.cc \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).