* 64 bit address to a pcie card @ 2012-07-04 6:33 sumit chaudhary 2012-07-04 13:59 ` Bjorn Helgaas 0 siblings, 1 reply; 7+ messages in thread From: sumit chaudhary @ 2012-07-04 6:33 UTC (permalink / raw) To: linux-pci Hi, I have a 64 bit PCIe card that is connected to 64 bit PC running ubuntu (Linux ubuntu 3.0.0-12-generic #20-Ubuntu SMP Fri Oct 7 14:56:25 UTC 2011 x86_64 x86_64 x86_64 GNU/Linux). Linux enumerate this PCIe card and assign 64 bit addresses to 64 bit BARS. Problem is that higher 4 bytes of these addresses are zero, even if they are 64 bit address they lies in 32 bit range. Is it somehow possible to assign real 64 bit addresses ? This is lspci output on my ubuntu PC. Region 0: Memory at fddff000 (64-bit, non-prefetchable) [size=4K] Region 2: Memory at fd000000 (64-bit, prefetchable) [size=8M] Region 4: Memory at fc800000 (64-bit, prefetchable) [size=8M] Regards, Flyingbee. ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: 64 bit address to a pcie card 2012-07-04 6:33 64 bit address to a pcie card sumit chaudhary @ 2012-07-04 13:59 ` Bjorn Helgaas [not found] ` <CAJkVMNpZaMKm8tc+axdOBySpp68_j=EegEUOO+B=cYudsxNCgw@mail.gmail.com> 0 siblings, 1 reply; 7+ messages in thread From: Bjorn Helgaas @ 2012-07-04 13:59 UTC (permalink / raw) To: sumit chaudhary; +Cc: linux-pci On Wed, Jul 4, 2012 at 12:33 AM, sumit chaudhary <flyingbee.linux@gmail.com> wrote: > Hi, > I have a 64 bit PCIe card that is connected to 64 bit PC running > ubuntu (Linux ubuntu 3.0.0-12-generic #20-Ubuntu SMP Fri Oct 7 > 14:56:25 UTC 2011 x86_64 x86_64 x86_64 GNU/Linux). Linux enumerate > this PCIe card and assign 64 bit addresses to 64 bit BARS. > > Problem is that higher 4 bytes of these addresses are zero, even if > they are 64 bit address > they lies in 32 bit range. > > Is it somehow possible to assign real 64 bit addresses ? > > This is lspci output on my ubuntu PC. > > Region 0: Memory at fddff000 (64-bit, non-prefetchable) [size=4K] > Region 2: Memory at fd000000 (64-bit, prefetchable) [size=8M] > Region 4: Memory at fc800000 (64-bit, prefetchable) [size=8M] Thanks for this report. 64-bit addresses should work, so there must be a problem here. Can you collect the complete dmesg log? That will contain more details about exactly what's going on. A dmesg log from a more recent kernel, e.g., 3.4, would also be useful, just in case this problem has already been fixed. Bjorn ^ permalink raw reply [flat|nested] 7+ messages in thread
[parent not found: <CAJkVMNpZaMKm8tc+axdOBySpp68_j=EegEUOO+B=cYudsxNCgw@mail.gmail.com>]
* Re: 64 bit address to a pcie card [not found] ` <CAJkVMNpZaMKm8tc+axdOBySpp68_j=EegEUOO+B=cYudsxNCgw@mail.gmail.com> @ 2012-07-05 15:16 ` Bjorn Helgaas 2012-07-06 0:14 ` Yinghai Lu 2012-07-09 5:39 ` sumit chaudhary 0 siblings, 2 replies; 7+ messages in thread From: Bjorn Helgaas @ 2012-07-05 15:16 UTC (permalink / raw) To: sumit chaudhary; +Cc: linux-pci [Added back cc: linux-pci so others can help, too] What exactly is the problem? Is there a device that isn't working as expected? The device at 07:00.0 does indeed have 64-bit BARs, and they happen to be assigned addresses below 4GB: pci 0000:07:00.0: reg 10: [mem 0xfddff000-0xfddfffff 64bit] pci 0000:07:00.0: reg 18: [mem 0xbf000000-0xbfffffff 64bit pref] pci 0000:07:00.0: reg 20: [mem 0x40000000-0x7fffffff 64bit pref] This is perfectly normal. The fact that the BAR supports a full 64-bit address doesn't mean it has to be assigned space above 4GB. The BIOS assigned these addresses, and Linux found no reason to change them, so we just left them alone. On Thu, Jul 5, 2012 at 5:29 AM, sumit chaudhary <flyingbee.linux@gmail.com> wrote: > Hi Bjorn, > > Thanks for your quick response. > Here are dmesg logs and lspci output on my ubuntu system(3.0.0). > Let me know if this information is good enough to point out issue. > Mean while I will try with recent kernel. > > Dmesg logs: > > [ 0.000000] Initializing cgroup subsys cpuset > [ 0.000000] Initializing cgroup subsys cpu > [ 0.000000] Linux version 3.0.0-12-generic (buildd@crested) (gcc > version 4.6.1 (Ubuntu/Linaro 4.6.1-9ubuntu3) ) #20-Ubuntu SMP Fri Oct > 7 14:56:25 UTC 2011 (Ubuntu 3.0.0-12.20-generic 3.0.4) > [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.0.0-12-generic > root=UUID=4ffbaf90-4493-453d-ae3e-008a7176bfc5 ro pci=assign-busses > quiet splash pci=assign-busses vt.handoff=7 > [ 0.000000] KERNEL supported cpus: > [ 0.000000] Intel GenuineIntel > [ 0.000000] AMD AuthenticAMD > [ 0.000000] Centaur CentaurHauls > [ 0.000000] BIOS-provided physical RAM map: > [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) > [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) > [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) > [ 0.000000] BIOS-e820: 0000000000100000 - 000000003fee0000 (usable) > [ 0.000000] BIOS-e820: 000000003fee0000 - 000000003fee3000 (ACPI NVS) > [ 0.000000] BIOS-e820: 000000003fee3000 - 000000003fef0000 (ACPI data) > [ 0.000000] BIOS-e820: 000000003fef0000 - 000000003ff00000 (reserved) > [ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) > [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) > [ 0.000000] NX (Execute Disable) protection: active > [ 0.000000] DMI 2.3 present. > [ 0.000000] DMI: System manufacturer System Product Name/M2N32-SLI > DELUXE, BIOS ASUS M2N32-SLI DELUXE ACPI BIOS Revision 0706 08/21/2006 > [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 > (usable) ==> (reserved) > [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) > [ 0.000000] No AGP bridge found > [ 0.000000] last_pfn = 0x3fee0 max_arch_pfn = 0x400000000 > [ 0.000000] MTRR default type: uncachable > [ 0.000000] MTRR fixed ranges enabled: > [ 0.000000] 00000-9FFFF write-back > [ 0.000000] A0000-BFFFF uncachable > [ 0.000000] C0000-C7FFF write-protect > [ 0.000000] C8000-FFFFF uncachable > [ 0.000000] MTRR variable ranges enabled: > [ 0.000000] 0 base 0000000000 mask FFC0000000 write-back > [ 0.000000] 1 base 003FF00000 mask FFFFF00000 uncachable > [ 0.000000] 2 disabled > [ 0.000000] 3 disabled > [ 0.000000] 4 disabled > [ 0.000000] 5 disabled > [ 0.000000] 6 disabled > [ 0.000000] 7 disabled > [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 > [ 0.000000] original variable MTRRs > [ 0.000000] reg 0, base: 0GB, range: 1GB, type WB > [ 0.000000] reg 1, base: 1023MB, range: 1MB, type UC > [ 0.000000] total RAM covered: 1023M > [ 0.000000] Found optimal setting for mtrr clean up > [ 0.000000] gran_size: 64K chunk_size: 2M num_reg: 2 lose cover RAM: 0G > [ 0.000000] New variable MTRRs > [ 0.000000] reg 0, base: 0GB, range: 1GB, type WB > [ 0.000000] reg 1, base: 1023MB, range: 1MB, type UC > [ 0.000000] found SMP MP-table at [ffff8800000f5fa0] f5fa0 > [ 0.000000] initial memory mapped : 0 - 20000000 > [ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480 > [ 0.000000] init_memory_mapping: 0000000000000000-000000003fee0000 > [ 0.000000] 0000000000 - 003fe00000 page 2M > [ 0.000000] 003fe00000 - 003fee0000 page 4k > [ 0.000000] kernel direct mapping tables up to 3fee0000 @ 3fedd000-3fee0000 > [ 0.000000] RAMDISK: 365bc000 - 372d6000 > [ 0.000000] ACPI: RSDP 00000000000f7c70 00014 (v00 Nvidia) > [ 0.000000] ACPI: RSDT 000000003fee3040 00030 (v01 Nvidia AWRDACPI > 42302E31 AWRD 00000000) > [ 0.000000] ACPI: FACP 000000003fee30c0 00074 (v01 Nvidia AWRDACPI > 42302E31 AWRD 00000000) > [ 0.000000] ACPI: DSDT 000000003fee3180 09348 (v01 NVIDIA AWRDACPI > 00001000 MSFT 0100000E) > [ 0.000000] ACPI: FACS 000000003fee0000 00040 > [ 0.000000] ACPI: MCFG 000000003feec600 0003C (v01 Nvidia AWRDACPI > 42302E31 AWRD 00000000) > [ 0.000000] ACPI: APIC 000000003feec540 00072 (v01 Nvidia AWRDACPI > 42302E31 AWRD 00000000) > [ 0.000000] ACPI: Local APIC address 0xfee00000 > [ 0.000000] Scanning NUMA topology in Northbridge 24 > [ 0.000000] No NUMA configuration found > [ 0.000000] Faking a node at 0000000000000000-000000003fee0000 > [ 0.000000] Initmem setup node 0 0000000000000000-000000003fee0000 > [ 0.000000] NODE_DATA [000000003fed8000 - 000000003fedcfff] > [ 0.000000] [ffffea0000000000-ffffea0000dfffff] PMD -> > [ffff88003e600000-ffff88003f3fffff] on node 0 > [ 0.000000] Zone PFN ranges: > [ 0.000000] DMA 0x00000010 -> 0x00001000 > [ 0.000000] DMA32 0x00001000 -> 0x00100000 > [ 0.000000] Normal empty > [ 0.000000] Movable zone start PFN for each node > [ 0.000000] early_node_map[2] active PFN ranges > [ 0.000000] 0: 0x00000010 -> 0x0000009f > [ 0.000000] 0: 0x00000100 -> 0x0003fee0 > [ 0.000000] On node 0 totalpages: 261743 > [ 0.000000] DMA zone: 56 pages used for memmap > [ 0.000000] DMA zone: 5 pages reserved > [ 0.000000] DMA zone: 3922 pages, LIFO batch:0 > [ 0.000000] DMA32 zone: 3525 pages used for memmap > [ 0.000000] DMA32 zone: 254235 pages, LIFO batch:31 > [ 0.000000] Nvidia board detected. Ignoring ACPI timer override. > [ 0.000000] If you got timer trouble try acpi_use_timer_override > [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 > [ 0.000000] ACPI: Local APIC address 0xfee00000 > [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) > [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled) > [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) > [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) > [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) > [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 > [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) > [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) > [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) > [ 0.000000] ACPI: IRQ9 used by override. > [ 0.000000] ACPI: IRQ14 used by override. > [ 0.000000] ACPI: IRQ15 used by override. > [ 0.000000] Using ACPI (MADT) for SMP configuration information > [ 0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs > [ 0.000000] nr_irqs_gsi: 40 > [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 > [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 > [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 > [ 0.000000] Allocating PCI resources starting at 3ff00000 (gap: > 3ff00000:b0100000) > [ 0.000000] Booting paravirtualized kernel on bare hardware > [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 > nr_cpu_ids:2 nr_node_ids:1 > [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88003fc00000 s79616 > r8192 d22784 u1048576 > [ 0.000000] pcpu-alloc: s79616 r8192 d22784 u1048576 alloc=1*2097152 > [ 0.000000] pcpu-alloc: [0] 0 1 > [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. > Total pages: 258157 > [ 0.000000] Policy zone: DMA32 > [ 0.000000] Kernel command line: > BOOT_IMAGE=/boot/vmlinuz-3.0.0-12-generic > root=UUID=4ffbaf90-4493-453d-ae3e-008a7176bfc5 ro pci=assign-busses > quiet splash pci=assign-busses vt.handoff=7 > [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) > [ 0.000000] Checking aperture... > [ 0.000000] No AGP bridge found > [ 0.000000] Node 0: aperture @ f1c000000 size 32 MB > [ 0.000000] Aperture beyond 4GB. Ignoring. > [ 0.000000] Memory: 1005520k/1047424k available (6104k kernel code, > 452k absent, 41452k reserved, 4880k data, 984k init) > [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, > CPUs=2, Nodes=1 > [ 0.000000] Hierarchical RCU implementation. > [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. > [ 0.000000] NR_IRQS:16640 nr_irqs:512 16 > [ 0.000000] spurious 8259A interrupt: IRQ7. > [ 0.000000] vt handoff: transparent VT on vt#7 > [ 0.000000] Console: colour dummy device 80x25 > [ 0.000000] console [tty0] enabled > [ 0.000000] allocated 8388608 bytes of page_cgroup > [ 0.000000] please try 'cgroup_disable=memory' option if you don't > want memory cgroups > [ 0.000000] Fast TSC calibration using PIT > [ 0.000000] Detected 2009.142 MHz processor. > [ 0.000000] Marking TSC unstable due to TSCs unsynchronized > [ 0.008007] Calibrating delay loop (skipped), value calculated > using timer frequency.. 4018.28 BogoMIPS (lpj=8036568) > [ 0.008012] pid_max: default: 32768 minimum: 301 > [ 0.008049] Security Framework initialized > [ 0.008074] AppArmor: AppArmor initialized > [ 0.008075] Yama: becoming mindful. > [ 0.008268] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) > [ 0.012494] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) > [ 0.012882] Mount-cache hash table entries: 256 > [ 0.013068] Initializing cgroup subsys cpuacct > [ 0.013075] Initializing cgroup subsys memory > [ 0.013086] Initializing cgroup subsys devices > [ 0.013089] Initializing cgroup subsys freezer > [ 0.013091] Initializing cgroup subsys net_cls > [ 0.013094] Initializing cgroup subsys blkio > [ 0.013102] Initializing cgroup subsys perf_event > [ 0.013141] tseg: 003ff00000 > [ 0.013144] mce: CPU supports 5 MCE banks > [ 0.013159] using AMD E400 aware idle routine > [ 0.013197] SMP alternatives: switching to UP code > [ 0.021136] ACPI: Core revision 20110413 > [ 0.028014] ftrace: allocating 25651 entries in 101 pages > [ 0.032637] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1 > [ 0.073689] CPU0: AMD Athlon(tm) 64 Processor 3200+ stepping 02 > [ 0.076004] Performance Events: AMD PMU driver. > [ 0.076004] ... version: 0 > [ 0.076004] ... bit width: 48 > [ 0.076004] ... generic registers: 4 > [ 0.076004] ... value mask: 0000ffffffffffff > [ 0.076004] ... max period: 00007fffffffffff > [ 0.076004] ... fixed-purpose events: 0 > [ 0.076004] ... event mask: 000000000000000f > [ 0.076004] Brought up 1 CPUs > [ 0.076004] Total of 1 processors activated (4018.28 BogoMIPS). > [ 0.076004] devtmpfs: initialized > [ 0.076004] PM: Registering ACPI NVS region at 3fee0000 (12288 bytes) > [ 0.076004] print_constraints: dummy: > [ 0.076004] Time: 10:15:27 Date: 07/05/12 > [ 0.076004] NET: Registered protocol family 16 > [ 0.076004] node 0 link 0: io port [8000, ffff] > [ 0.076004] TOM: 0000000040000000 aka 1024M > [ 0.076004] node 0 link 0: mmio [a0000, bffff] > [ 0.076004] node 0 link 0: mmio [40000000, efffffff] > [ 0.076004] node 0 link 0: mmio [f4000000, fe02ffff] > [ 0.076004] node 0 link 0: mmio [f0000000, f07fffff] > [ 0.076004] bus: [00, 07] on node 0 link 0 > [ 0.076004] bus: 00 index 0 [io 0x0000-0xffff] > [ 0.076004] bus: 00 index 1 [mem 0x000a0000-0x000bffff] > [ 0.076004] bus: 00 index 2 [mem 0x40000000-0xf3ffffff] > [ 0.076004] bus: 00 index 3 [mem 0xf4000000-0xfcffffffff] > [ 0.076004] ACPI: bus type pci registered > [ 0.076004] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem > 0xf0000000-0xf3ffffff] (base 0xf0000000) > [ 0.076004] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820 > [ 0.080216] PCI: Using configuration type 1 for base access > [ 0.081104] bio: create slab <bio-0> at 0 > [ 0.083134] ACPI: EC: Look up EC in DSDT > [ 0.091179] ACPI: Interpreter enabled > [ 0.091185] ACPI: (supports S0 S1 S3 S4 S5) > [ 0.091211] ACPI: Using IOAPIC for interrupt routing > [ 0.099460] ACPI: No dock devices found. > [ 0.099465] HEST: Table not found. > [ 0.099470] PCI: Ignoring host bridge windows from ACPI; if > necessary, use "pci=use_crs" and report a bug > [ 0.100096] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-07]) > [ 0.101293] pci_root PNP0A08:00: host bridge window [io > 0x0000-0x03af] (ignored) > [ 0.101297] pci_root PNP0A08:00: host bridge window [io > 0x03e0-0x0cf7] (ignored) > [ 0.101300] pci_root PNP0A08:00: host bridge window [io > 0x1c00-0x1c7f] (ignored) > [ 0.101303] pci_root PNP0A08:00: host bridge window [io > 0x8000-0xffff] (ignored) > [ 0.101306] pci_root PNP0A08:00: host bridge window [io > 0x03b0-0x03df] (ignored) > [ 0.101309] pci_root PNP0A08:00: host bridge window [mem > 0x000a0000-0x000bffff] (ignored) > [ 0.101312] pci_root PNP0A08:00: host bridge window [mem > 0x40000000-0xefffffff] (ignored) > [ 0.101315] pci_root PNP0A08:00: host bridge window [mem > 0xf4000000-0xfe02ffff] (ignored) > [ 0.101318] pci_root PNP0A08:00: host bridge window [mem > 0xfec80000-0xfecbffff] (ignored) > [ 0.101331] pci 0000:00:00.0: [10de:02f4] type 0 class 0x000500 > [ 0.101378] pci 0000:00:00.1: [10de:02fa] type 0 class 0x000500 > [ 0.101408] pci 0000:00:00.2: [10de:02fe] type 0 class 0x000500 > [ 0.101447] pci 0000:00:00.3: [10de:02f8] type 0 class 0x000500 > [ 0.101484] pci 0000:00:00.4: [10de:02f9] type 0 class 0x000500 > [ 0.101523] pci 0000:00:00.5: [10de:02ff] type 0 class 0x000500 > [ 0.101557] pci 0000:00:00.6: [10de:027f] type 0 class 0x000500 > [ 0.101590] pci 0000:00:00.7: [10de:027e] type 0 class 0x000500 > [ 0.101633] pci 0000:00:03.0: [10de:02fd] type 1 class 0x000604 > [ 0.101658] pci 0000:00:03.0: PME# supported from D0 D1 D2 D3hot D3cold > [ 0.101661] pci 0000:00:03.0: PME# disabled > [ 0.101677] pci 0000:00:04.0: [10de:02fb] type 1 class 0x000604 > [ 0.101699] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold > [ 0.101702] pci 0000:00:04.0: PME# disabled > [ 0.101734] pci 0000:00:08.0: [10de:0369] type 0 class 0x000500 > [ 0.101904] pci 0000:00:09.0: [10de:0360] type 0 class 0x000601 > [ 0.101939] HPET not enabled in BIOS. You might try hpet=force boot option > [ 0.101957] pci 0000:00:09.1: [10de:0368] type 0 class 0x000c05 > [ 0.101973] pci 0000:00:09.1: reg 10: [io 0xfc00-0xfc3f] > [ 0.101996] pci 0000:00:09.1: reg 20: [io 0x1c00-0x1c3f] > [ 0.102003] pci 0000:00:09.1: reg 24: [io 0x1c40-0x1c7f] > [ 0.102029] pci 0000:00:09.1: PME# supported from D3hot D3cold > [ 0.102035] pci 0000:00:09.1: PME# disabled > [ 0.102050] pci 0000:00:09.2: [10de:036a] type 0 class 0x000500 > [ 0.102109] pci 0000:00:0a.0: [10de:036c] type 0 class 0x000c03 > [ 0.102121] pci 0000:00:0a.0: reg 10: [mem 0xfe02f000-0xfe02ffff] > [ 0.102159] pci 0000:00:0a.0: supports D1 D2 > [ 0.102162] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold > [ 0.102166] pci 0000:00:0a.0: PME# disabled > [ 0.102183] pci 0000:00:0a.1: [10de:036d] type 0 class 0x000c03 > [ 0.102195] pci 0000:00:0a.1: reg 10: [mem 0xfe02e000-0xfe02e0ff] > [ 0.102234] pci 0000:00:0a.1: supports D1 D2 > [ 0.102236] pci 0000:00:0a.1: PME# supported from D0 D1 D2 D3hot D3cold > [ 0.102240] pci 0000:00:0a.1: PME# disabled > [ 0.102262] pci 0000:00:0c.0: [10de:036e] type 0 class 0x000101 > [ 0.102287] pci 0000:00:0c.0: reg 20: [io 0xf000-0xf00f] > [ 0.102320] pci 0000:00:0d.0: [10de:037f] type 0 class 0x000101 > [ 0.102333] pci 0000:00:0d.0: reg 10: [io 0x09f0-0x09f7] > [ 0.102339] pci 0000:00:0d.0: reg 14: [io 0x0bf0-0x0bf3] > [ 0.102345] pci 0000:00:0d.0: reg 18: [io 0x0970-0x0977] > [ 0.102352] pci 0000:00:0d.0: reg 1c: [io 0x0b70-0x0b73] > [ 0.102358] pci 0000:00:0d.0: reg 20: [io 0xdc00-0xdc0f] > [ 0.102365] pci 0000:00:0d.0: reg 24: [mem 0xfe02d000-0xfe02dfff] > [ 0.102401] pci 0000:00:0d.1: [10de:037f] type 0 class 0x000101 > [ 0.102414] pci 0000:00:0d.1: reg 10: [io 0x09e0-0x09e7] > [ 0.102420] pci 0000:00:0d.1: reg 14: [io 0x0be0-0x0be3] > [ 0.102427] pci 0000:00:0d.1: reg 18: [io 0x0960-0x0967] > [ 0.102433] pci 0000:00:0d.1: reg 1c: [io 0x0b60-0x0b63] > [ 0.102440] pci 0000:00:0d.1: reg 20: [io 0xc800-0xc80f] > [ 0.102446] pci 0000:00:0d.1: reg 24: [mem 0xfe02c000-0xfe02cfff] > [ 0.102482] pci 0000:00:0d.2: [10de:037f] type 0 class 0x000101 > [ 0.102495] pci 0000:00:0d.2: reg 10: [io 0xc400-0xc407] > [ 0.102501] pci 0000:00:0d.2: reg 14: [io 0xc000-0xc003] > [ 0.102508] pci 0000:00:0d.2: reg 18: [io 0xbc00-0xbc07] > [ 0.102514] pci 0000:00:0d.2: reg 1c: [io 0xb800-0xb803] > [ 0.102521] pci 0000:00:0d.2: reg 20: [io 0xb400-0xb40f] > [ 0.102527] pci 0000:00:0d.2: reg 24: [mem 0xfe02b000-0xfe02bfff] > [ 0.102567] pci 0000:00:0e.0: [10de:0370] type 1 class 0x000604 > [ 0.102611] pci 0000:00:0e.1: [10de:0371] type 0 class 0x000403 > [ 0.102625] pci 0000:00:0e.1: reg 10: [mem 0xfe020000-0xfe023fff] > [ 0.102668] pci 0000:00:0e.1: PME# supported from D3hot D3cold > [ 0.102672] pci 0000:00:0e.1: PME# disabled > [ 0.102701] pci 0000:00:10.0: [10de:0373] type 0 class 0x000680 > [ 0.102717] pci 0000:00:10.0: reg 10: [mem 0xfe02a000-0xfe02afff] > [ 0.102724] pci 0000:00:10.0: reg 14: [io 0xb000-0xb007] > [ 0.102730] pci 0000:00:10.0: reg 18: [mem 0xfe029000-0xfe0290ff] > [ 0.102737] pci 0000:00:10.0: reg 1c: [mem 0xfe028000-0xfe02800f] > [ 0.102771] pci 0000:00:10.0: supports D1 D2 > [ 0.102773] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold > [ 0.102778] pci 0000:00:10.0: PME# disabled > [ 0.102803] pci 0000:00:11.0: [10de:0373] type 0 class 0x000680 > [ 0.102818] pci 0000:00:11.0: reg 10: [mem 0xfe027000-0xfe027fff] > [ 0.102825] pci 0000:00:11.0: reg 14: [io 0xac00-0xac07] > [ 0.102831] pci 0000:00:11.0: reg 18: [mem 0xfe026000-0xfe0260ff] > [ 0.102838] pci 0000:00:11.0: reg 1c: [mem 0xfe025000-0xfe02500f] > [ 0.102872] pci 0000:00:11.0: supports D1 D2 > [ 0.102874] pci 0000:00:11.0: PME# supported from D0 D1 D2 D3hot D3cold > [ 0.102879] pci 0000:00:11.0: PME# disabled > [ 0.102900] pci 0000:00:12.0: [10de:0376] type 1 class 0x000604 > [ 0.102934] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold > [ 0.102937] pci 0000:00:12.0: PME# disabled > [ 0.102959] pci 0000:00:14.0: [10de:0374] type 1 class 0x000604 > [ 0.102992] pci 0000:00:14.0: PME# supported from D0 D1 D2 D3hot D3cold > [ 0.102996] pci 0000:00:14.0: PME# disabled > [ 0.103017] pci 0000:00:16.0: [10de:0375] type 1 class 0x000604 > [ 0.103051] pci 0000:00:16.0: PME# supported from D0 D1 D2 D3hot D3cold > [ 0.103054] pci 0000:00:16.0: PME# disabled > [ 0.103075] pci 0000:00:17.0: [10de:0377] type 1 class 0x000604 > [ 0.103108] pci 0000:00:17.0: PME# supported from D0 D1 D2 D3hot D3cold > [ 0.103111] pci 0000:00:17.0: PME# disabled > [ 0.103126] pci 0000:00:18.0: [1022:1100] type 0 class 0x000600 > [ 0.103146] pci 0000:00:18.1: [1022:1101] type 0 class 0x000600 > [ 0.103164] pci 0000:00:18.2: [1022:1102] type 0 class 0x000600 > [ 0.103183] pci 0000:00:18.3: [1022:1103] type 0 class 0x000600 > [ 0.103211] PCI: peer root bus 00 res updated from pci conf > [ 0.103255] pci 0000:00:03.0: PCI bridge to [bus 01-ff] > [ 0.103259] pci 0000:00:03.0: bridge window [io 0xf000-0x0000] (disabled) > [ 0.103263] pci 0000:00:03.0: bridge window [mem > 0xfff00000-0x000fffff] (disabled) > [ 0.103267] pci 0000:00:03.0: bridge window [mem > 0xfff00000-0x000fffff pref] (disabled) > [ 0.103300] pci 0000:02:00.0: [10de:0161] type 0 class 0x000300 > [ 0.103308] pci 0000:02:00.0: reg 10: [mem 0xfa000000-0xfaffffff] > [ 0.103318] pci 0000:02:00.0: reg 14: [mem 0xe0000000-0xefffffff 64bit pref] > [ 0.103327] pci 0000:02:00.0: reg 1c: [mem 0xfb000000-0xfbffffff 64bit] > [ 0.103337] pci 0000:02:00.0: reg 30: [mem 0xfcfe0000-0xfcffffff pref] > [ 0.103360] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe > device. You can enable it with 'pcie_aspm=force' > [ 0.103368] pci 0000:00:04.0: PCI bridge to [bus 02-ff] > [ 0.103372] pci 0000:00:04.0: bridge window [io 0xf000-0x0000] (disabled) > [ 0.103375] pci 0000:00:04.0: bridge window [mem 0xfa000000-0xfcffffff] > [ 0.103380] pci 0000:00:04.0: bridge window [mem > 0xe0000000-0xefffffff 64bit pref] > [ 0.103416] pci 0000:03:07.0: [10ec:8139] type 0 class 0x000200 > [ 0.103430] pci 0000:03:07.0: reg 10: [io 0x9c00-0x9cff] > [ 0.103439] pci 0000:03:07.0: reg 14: [mem 0xfdfff000-0xfdfff0ff] > [ 0.103471] pci 0000:03:07.0: reg 30: [mem 0xfdfe0000-0xfdfeffff pref] > [ 0.103486] pci 0000:03:07.0: supports D1 D2 > [ 0.103489] pci 0000:03:07.0: PME# supported from D1 D2 D3hot D3cold > [ 0.103493] pci 0000:03:07.0: PME# disabled > [ 0.103512] pci 0000:03:0b.0: [104c:8023] type 0 class 0x000c00 > [ 0.103526] pci 0000:03:0b.0: reg 10: [mem 0xfdffe000-0xfdffe7ff] > [ 0.103535] pci 0000:03:0b.0: reg 14: [mem 0xfdff8000-0xfdffbfff] > [ 0.103581] pci 0000:03:0b.0: supports D1 D2 > [ 0.103583] pci 0000:03:0b.0: PME# supported from D0 D1 D2 D3hot > [ 0.103588] pci 0000:03:0b.0: PME# disabled > [ 0.103613] pci 0000:00:0e.0: PCI bridge to [bus 03-ff] (subtractive decode) > [ 0.103617] pci 0000:00:0e.0: bridge window [io 0x9000-0x9fff] > [ 0.103621] pci 0000:00:0e.0: bridge window [mem 0xfdf00000-0xfdffffff] > [ 0.103625] pci 0000:00:0e.0: bridge window [mem > 0xfff00000-0x000fffff pref] (disabled) > [ 0.103628] pci 0000:00:0e.0: bridge window [io 0x0000-0xffff] > (subtractive decode) > [ 0.103631] pci 0000:00:0e.0: bridge window [mem > 0x000a0000-0x000bffff] (subtractive decode) > [ 0.103634] pci 0000:00:0e.0: bridge window [mem > 0x40000000-0xf3ffffff] (subtractive decode) > [ 0.103637] pci 0000:00:0e.0: bridge window [mem > 0xf4000000-0xfcffffffff] (subtractive decode) > [ 0.103672] pci 0000:00:12.0: PCI bridge to [bus 04-ff] > [ 0.103677] pci 0000:00:12.0: bridge window [io 0xf000-0x0000] (disabled) > [ 0.103680] pci 0000:00:12.0: bridge window [mem > 0xfff00000-0x000fffff] (disabled) > [ 0.103685] pci 0000:00:12.0: bridge window [mem > 0xfff00000-0x000fffff pref] (disabled) > [ 0.103720] pci 0000:00:14.0: PCI bridge to [bus 05-ff] > [ 0.103725] pci 0000:00:14.0: bridge window [io 0xf000-0x0000] (disabled) > [ 0.103728] pci 0000:00:14.0: bridge window [mem > 0xfff00000-0x000fffff] (disabled) > [ 0.103733] pci 0000:00:14.0: bridge window [mem > 0xfff00000-0x000fffff pref] (disabled) > [ 0.103786] pci 0000:06:00.0: [1095:3132] type 0 class 0x000180 > [ 0.103809] pci 0000:06:00.0: reg 10: [mem 0xfdeff000-0xfdeff07f 64bit] > [ 0.103827] pci 0000:06:00.0: reg 18: [mem 0xfdef8000-0xfdefbfff 64bit] > [ 0.103840] pci 0000:06:00.0: reg 20: [io 0x8c00-0x8c7f] > [ 0.103862] pci 0000:06:00.0: reg 30: [mem 0xfde00000-0xfde7ffff pref] > [ 0.103896] pci 0000:06:00.0: supports D1 D2 > [ 0.103914] pci 0000:06:00.0: disabling ASPM on pre-1.1 PCIe > device. You can enable it with 'pcie_aspm=force' > [ 0.103926] pci 0000:00:16.0: PCI bridge to [bus 06-ff] > [ 0.103930] pci 0000:00:16.0: bridge window [io 0x8000-0x8fff] > [ 0.103934] pci 0000:00:16.0: bridge window [mem 0xfde00000-0xfdefffff] > [ 0.103939] pci 0000:00:16.0: bridge window [mem > 0xfff00000-0x000fffff pref] (disabled) > [ 0.103986] pci 0000:07:00.0: [104c:b800] type 0 class 0x000400 > [ 0.104014] pci 0000:07:00.0: reg 10: [mem 0xfddff000-0xfddfffff 64bit] > [ 0.104028] pci 0000:07:00.0: reg 18: [mem 0xbf000000-0xbfffffff 64bit pref] > [ 0.104041] pci 0000:07:00.0: reg 20: [mem 0x40000000-0x7fffffff 64bit pref] > [ 0.112023] pci 0000:00:17.0: PCI bridge to [bus 07-ff] > [ 0.112028] pci 0000:00:17.0: bridge window [io 0xf000-0x0000] (disabled) > [ 0.112032] pci 0000:00:17.0: bridge window [mem 0xfdd00000-0xfddfffff] > [ 0.112037] pci 0000:00:17.0: bridge window [mem > 0x40000000-0xbfffffff 64bit pref] > [ 0.112044] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] > [ 0.112317] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] > [ 0.112519] pci0000:00: Requesting ACPI _OSC control (0x1d) > [ 0.112524] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), > returned control mask: 0x1d > [ 0.112526] ACPI _OSC control for PCIe not granted, disabling ASPM > [ 0.186782] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 *10 11 14 15) > [ 0.186841] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 *10 11 14 15) > [ 0.186895] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 > 15) *0, disabled. > [ 0.186949] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 > 15) *0, disabled. > [ 0.187005] ACPI: PCI Interrupt Link [LNK5] (IRQs *5 7 9 10 11 14 15) > [ 0.187060] ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 *11 14 15) > [ 0.187115] ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 *11 14 15) > [ 0.187174] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 > 15) *0, disabled. > [ 0.187229] ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 > 15) *0, disabled. > [ 0.187286] ACPI: PCI Interrupt Link [LUBA] (IRQs 5 *7 9 10 11 14 15) > [ 0.187345] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 10 *11 14 15) > [ 0.187409] ACPI: PCI Interrupt Link [LMC1] (IRQs *5 7 9 10 11 14 15) > [ 0.187464] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 *10 11 14 15) > [ 0.187519] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 > 15) *0, disabled. > [ 0.187575] ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 *10 11 14 15) > [ 0.187636] ACPI: PCI Interrupt Link [LUB2] (IRQs *5 7 9 10 11 14 15) > [ 0.187691] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 > 15) *0, disabled. > [ 0.187747] ACPI: PCI Interrupt Link [LSID] (IRQs *5 7 9 10 11 14 15) > [ 0.187802] ACPI: PCI Interrupt Link [LFID] (IRQs *5 7 9 10 11 14 15) > [ 0.187858] ACPI: PCI Interrupt Link [LSA2] (IRQs *5 7 9 10 11 14 15) > [ 0.187955] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0 > [ 0.188048] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0 > [ 0.188131] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled. > [ 0.188213] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled. > [ 0.188296] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0 > [ 0.188379] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0 > [ 0.188461] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0 > [ 0.188543] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled. > [ 0.188627] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0 > [ 0.188711] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0 > [ 0.188795] ACPI: PCI Interrupt Link [AMC1] (IRQs 20 21 22 23) *0 > [ 0.188880] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled. > [ 0.188965] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0 > [ 0.189050] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0 > [ 0.189135] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0 > [ 0.189223] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled. > [ 0.189313] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled. > [ 0.189398] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0 > [ 0.189483] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0 > [ 0.189567] ACPI: PCI Interrupt Link [ASA2] (IRQs 20 21 22 23) *0 > [ 0.189712] vgaarb: device added: > PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none > [ 0.189717] vgaarb: loaded > [ 0.189718] vgaarb: bridge control possible 0000:02:00.0 > [ 0.189943] SCSI subsystem initialized > [ 0.190030] libata version 3.00 loaded. > [ 0.190085] usbcore: registered new interface driver usbfs > [ 0.190096] usbcore: registered new interface driver hub > [ 0.190125] usbcore: registered new device driver usb > [ 0.190225] PCI: Using ACPI for IRQ routing > [ 0.191684] PCI: pci_cache_line_size set to 64 bytes > [ 0.191786] reserve RAM buffer: 000000000009f800 - 000000000009ffff > [ 0.191789] reserve RAM buffer: 000000003fee0000 - 000000003fffffff > [ 0.191909] NetLabel: Initializing > [ 0.191911] NetLabel: domain hash size = 128 > [ 0.191913] NetLabel: protocols = UNLABELED CIPSOv4 > [ 0.191927] NetLabel: unlabeled traffic allowed by default > [ 0.200075] AppArmor: AppArmor Filesystem Enabled > [ 0.200122] pnp: PnP ACPI init > [ 0.200142] ACPI: bus type pnp registered > [ 0.200844] pnp 00:00: [bus 00-07] > [ 0.200847] pnp 00:00: [io 0x0cf8-0x0cff] > [ 0.200850] pnp 00:00: [io 0x0000-0x03af window] > [ 0.200857] pnp 00:00: [io 0x03e0-0x0cf7 window] > [ 0.200859] pnp 00:00: [io 0x1c00-0x1c7f window] > [ 0.200862] pnp 00:00: [io 0x8000-0xffff window] > [ 0.200865] pnp 00:00: [io 0x03b0-0x03df window] > [ 0.200867] pnp 00:00: [mem 0x000a0000-0x000bffff window] > [ 0.200870] pnp 00:00: [mem 0x40000000-0xefffffff window] > [ 0.200873] pnp 00:00: [mem 0xf4000000-0xfe02ffff window] > [ 0.200876] pnp 00:00: [mem 0xfec80000-0xfecbffff window] > [ 0.200970] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 > PNP0a03 (active) > [ 0.200994] pnp 00:01: [io 0x1000-0x107f] > [ 0.200997] pnp 00:01: [io 0x1080-0x10ff] > [ 0.200999] pnp 00:01: [io 0x1400-0x147f] > [ 0.201002] pnp 00:01: [io 0x1480-0x14ff] > [ 0.201004] pnp 00:01: [io 0x1800-0x187f] > [ 0.201006] pnp 00:01: [io 0x1880-0x18ff] > [ 0.201088] system 00:01: [io 0x1000-0x107f] has been reserved > [ 0.201091] system 00:01: [io 0x1080-0x10ff] has been reserved > [ 0.201094] system 00:01: [io 0x1400-0x147f] has been reserved > [ 0.201097] system 00:01: [io 0x1480-0x14ff] has been reserved > [ 0.201101] system 00:01: [io 0x1800-0x187f] has been reserved > [ 0.201104] system 00:01: [io 0x1880-0x18ff] has been reserved > [ 0.201108] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) > [ 0.202001] pnp 00:02: [io 0x0010-0x001f] > [ 0.202004] pnp 00:02: [io 0x0022-0x003f] > [ 0.202006] pnp 00:02: [io 0x0044-0x005f] > [ 0.202008] pnp 00:02: [io 0x0062-0x0063] > [ 0.202011] pnp 00:02: [io 0x0065-0x006f] > [ 0.202013] pnp 00:02: [io 0x0074-0x007f] > [ 0.202015] pnp 00:02: [io 0x0091-0x0093] > [ 0.202018] pnp 00:02: [io 0x00a2-0x00bf] > [ 0.202020] pnp 00:02: [io 0x00e0-0x00ef] > [ 0.202022] pnp 00:02: [io 0x04d0-0x04d1] > [ 0.202025] pnp 00:02: [io 0x0800-0x087f] > [ 0.202027] pnp 00:02: [io 0x0290-0x0297] > [ 0.202121] system 00:02: [io 0x04d0-0x04d1] has been reserved > [ 0.202127] system 00:02: [io 0x0800-0x087f] has been reserved > [ 0.202130] system 00:02: [io 0x0290-0x0297] has been reserved > [ 0.202134] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) > [ 0.202149] pnp 00:03: [dma 4] > [ 0.202151] pnp 00:03: [io 0x0000-0x000f] > [ 0.202154] pnp 00:03: [io 0x0080-0x0090] > [ 0.202156] pnp 00:03: [io 0x0094-0x009f] > [ 0.202158] pnp 00:03: [io 0x00c0-0x00df] > [ 0.202212] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active) > [ 0.202225] pnp 00:04: [io 0x0070-0x0073] > [ 0.202243] pnp 00:04: [irq 8] > [ 0.202297] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active) > [ 0.202308] pnp 00:05: [io 0x0061] > [ 0.202365] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active) > [ 0.202376] pnp 00:06: [io 0x00f0-0x00ff] > [ 0.202385] pnp 00:06: [irq 13] > [ 0.202440] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active) > [ 0.202629] pnp 00:07: [io 0x03f0-0x03f5] > [ 0.202632] pnp 00:07: [io 0x03f7] > [ 0.202641] pnp 00:07: [irq 6] > [ 0.202643] pnp 00:07: [dma 2] > [ 0.202709] pnp 00:07: Plug and Play ACPI device, IDs PNP0700 (active) > [ 0.202970] pnp 00:08: [io 0x03f8-0x03ff] > [ 0.202979] pnp 00:08: [irq 4] > [ 0.203065] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active) > [ 0.203461] pnp 00:09: [io 0x0378-0x037f] > [ 0.203471] pnp 00:09: [irq 7] > [ 0.203547] pnp 00:09: Plug and Play ACPI device, IDs PNP0400 (active) > [ 0.203688] pnp 00:0a: [io 0x0060] > [ 0.203691] pnp 00:0a: [io 0x0064] > [ 0.203699] pnp 00:0a: [irq 1] > [ 0.203762] pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 > PNP030b (active) > [ 0.203800] pnp 00:0b: [mem 0x00000000-0xffffffffffffffff disabled] > [ 0.203884] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active) > [ 0.204052] pnp 00:0c: [mem 0x000cec00-0x000cffff] > [ 0.204055] pnp 00:0c: [mem 0x000f0000-0x000f7fff] > [ 0.204057] pnp 00:0c: [mem 0x000f8000-0x000fbfff] > [ 0.204060] pnp 00:0c: [mem 0x000fc000-0x000fffff] > [ 0.204062] pnp 00:0c: [mem 0x3fee0000-0x3fefffff] > [ 0.204065] pnp 00:0c: [mem 0xffff0000-0xffffffff] > [ 0.204067] pnp 00:0c: [mem 0x00000000-0x0009ffff] > [ 0.204069] pnp 00:0c: [mem 0x00100000-0x3fedffff] > [ 0.204072] pnp 00:0c: [mem 0xfec00000-0xfec00fff] > [ 0.204074] pnp 00:0c: [mem 0xfee00000-0xfeefffff] > [ 0.204077] pnp 00:0c: [mem 0xfefff000-0xfeffffff] > [ 0.204079] pnp 00:0c: [mem 0xfff80000-0xfff80fff] > [ 0.204082] pnp 00:0c: [mem 0xfff90000-0xfffbffff] > [ 0.204084] pnp 00:0c: [mem 0xfffed000-0xfffeffff] > [ 0.204190] system 00:0c: [mem 0x000cec00-0x000cffff] has been reserved > [ 0.204194] system 00:0c: [mem 0x000f0000-0x000f7fff] could not be reserved > [ 0.204197] system 00:0c: [mem 0x000f8000-0x000fbfff] could not be reserved > [ 0.204201] system 00:0c: [mem 0x000fc000-0x000fffff] could not be reserved > [ 0.204204] system 00:0c: [mem 0x3fee0000-0x3fefffff] could not be reserved > [ 0.204208] system 00:0c: [mem 0xffff0000-0xffffffff] has been reserved > [ 0.204212] system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved > [ 0.204215] system 00:0c: [mem 0x00100000-0x3fedffff] could not be reserved > [ 0.204219] system 00:0c: [mem 0xfec00000-0xfec00fff] could not be reserved > [ 0.204222] system 00:0c: [mem 0xfee00000-0xfeefffff] has been reserved > [ 0.204226] system 00:0c: [mem 0xfefff000-0xfeffffff] has been reserved > [ 0.204229] system 00:0c: [mem 0xfff80000-0xfff80fff] has been reserved > [ 0.204232] system 00:0c: [mem 0xfff90000-0xfffbffff] has been reserved > [ 0.204236] system 00:0c: [mem 0xfffed000-0xfffeffff] has been reserved > [ 0.204239] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active) > [ 0.204268] pnp: PnP ACPI: found 13 devices > [ 0.204270] ACPI: ACPI bus type pnp unregistered > [ 0.210548] Switching to clocksource acpi_pm > [ 0.210594] PCI: max bus depth: 1 pci_try_num: 2 > [ 0.210640] pci 0000:00:03.0: PCI bridge to [bus 01-01] > [ 0.210643] pci 0000:00:03.0: bridge window [io disabled] > [ 0.210646] pci 0000:00:03.0: bridge window [mem disabled] > [ 0.210649] pci 0000:00:03.0: bridge window [mem pref disabled] > [ 0.210653] pci 0000:00:04.0: PCI bridge to [bus 02-02] > [ 0.210655] pci 0000:00:04.0: bridge window [io disabled] > [ 0.210659] pci 0000:00:04.0: bridge window [mem 0xfa000000-0xfcffffff] > [ 0.210663] pci 0000:00:04.0: bridge window [mem > 0xe0000000-0xefffffff 64bit pref] > [ 0.210668] pci 0000:00:0e.0: PCI bridge to [bus 03-03] > [ 0.210671] pci 0000:00:0e.0: bridge window [io 0x9000-0x9fff] > [ 0.210675] pci 0000:00:0e.0: bridge window [mem 0xfdf00000-0xfdffffff] > [ 0.210678] pci 0000:00:0e.0: bridge window [mem pref disabled] > [ 0.210682] pci 0000:00:12.0: PCI bridge to [bus 04-04] > [ 0.210685] pci 0000:00:12.0: bridge window [io disabled] > [ 0.210688] pci 0000:00:12.0: bridge window [mem disabled] > [ 0.210691] pci 0000:00:12.0: bridge window [mem pref disabled] > [ 0.210696] pci 0000:00:14.0: PCI bridge to [bus 05-05] > [ 0.210698] pci 0000:00:14.0: bridge window [io disabled] > [ 0.210702] pci 0000:00:14.0: bridge window [mem disabled] > [ 0.210705] pci 0000:00:14.0: bridge window [mem pref disabled] > [ 0.210710] pci 0000:00:16.0: PCI bridge to [bus 06-06] > [ 0.210713] pci 0000:00:16.0: bridge window [io 0x8000-0x8fff] > [ 0.210717] pci 0000:00:16.0: bridge window [mem 0xfde00000-0xfdefffff] > [ 0.210720] pci 0000:00:16.0: bridge window [mem pref disabled] > [ 0.210725] pci 0000:00:17.0: PCI bridge to [bus 07-07] > [ 0.210727] pci 0000:00:17.0: bridge window [io disabled] > [ 0.210731] pci 0000:00:17.0: bridge window [mem 0xfdd00000-0xfddfffff] > [ 0.210735] pci 0000:00:17.0: bridge window [mem > 0x40000000-0xbfffffff 64bit pref] > [ 0.210748] pci 0000:00:03.0: setting latency timer to 64 > [ 0.210753] pci 0000:00:04.0: setting latency timer to 64 > [ 0.210758] pci 0000:00:0e.0: setting latency timer to 64 > [ 0.210765] pci 0000:00:12.0: setting latency timer to 64 > [ 0.210771] pci 0000:00:14.0: setting latency timer to 64 > [ 0.210777] pci 0000:00:16.0: setting latency timer to 64 > [ 0.210783] pci 0000:00:17.0: setting latency timer to 64 > [ 0.210787] pci_bus 0000:00: resource 4 [io 0x0000-0xffff] > [ 0.210790] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff] > [ 0.210793] pci_bus 0000:00: resource 6 [mem 0x40000000-0xf3ffffff] > [ 0.210796] pci_bus 0000:00: resource 7 [mem 0xf4000000-0xfcffffffff] > [ 0.210799] pci_bus 0000:02: resource 1 [mem 0xfa000000-0xfcffffff] > [ 0.210802] pci_bus 0000:02: resource 2 [mem 0xe0000000-0xefffffff > 64bit pref] > [ 0.210805] pci_bus 0000:03: resource 0 [io 0x9000-0x9fff] > [ 0.210808] pci_bus 0000:03: resource 1 [mem 0xfdf00000-0xfdffffff] > [ 0.210811] pci_bus 0000:03: resource 4 [io 0x0000-0xffff] > [ 0.210814] pci_bus 0000:03: resource 5 [mem 0x000a0000-0x000bffff] > [ 0.210817] pci_bus 0000:03: resource 6 [mem 0x40000000-0xf3ffffff] > [ 0.210819] pci_bus 0000:03: resource 7 [mem 0xf4000000-0xfcffffffff] > [ 0.210823] pci_bus 0000:06: resource 0 [io 0x8000-0x8fff] > [ 0.210825] pci_bus 0000:06: resource 1 [mem 0xfde00000-0xfdefffff] > [ 0.210829] pci_bus 0000:07: resource 1 [mem 0xfdd00000-0xfddfffff] > [ 0.210832] pci_bus 0000:07: resource 2 [mem 0x40000000-0xbfffffff > 64bit pref] > [ 0.210889] NET: Registered protocol family 2 > [ 0.210997] IP route cache hash table entries: 32768 (order: 6, 262144 bytes) > [ 0.211618] TCP established hash table entries: 131072 (order: 9, > 2097152 bytes) > [ 0.211618] Switched to NOHz mode on CPU #0 > [ 0.211618] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) > [ 0.211618] TCP: Hash tables configured (established 131072 bind 65536) > [ 0.211618] TCP reno registered > [ 0.211618] UDP hash table entries: 512 (order: 2, 16384 bytes) > [ 0.211618] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) > [ 0.211618] NET: Registered protocol family 1 > [ 0.211618] pci 0000:00:00.0: Found enabled HT MSI Mapping > [ 0.211618] pci 0000:00:00.0: Found enabled HT MSI Mapping > [ 0.284092] pci 0000:00:0d.0: Enabling HT MSI Mapping > [ 0.284144] pci 0000:00:0d.1: Enabling HT MSI Mapping > [ 0.284195] pci 0000:00:0d.2: Enabling HT MSI Mapping > [ 0.284246] pci 0000:00:0e.0: Enabling HT MSI Mapping > [ 0.284302] pci 0000:00:0e.1: Enabling HT MSI Mapping > [ 0.284369] pci 0000:00:10.0: Enabling HT MSI Mapping > [ 0.284444] pci 0000:00:11.0: Enabling HT MSI Mapping > [ 0.284522] pci 0000:00:12.0: Enabling HT MSI Mapping > [ 0.284607] pci 0000:00:14.0: Enabling HT MSI Mapping > [ 0.284700] pci 0000:00:16.0: Enabling HT MSI Mapping > [ 0.284799] pci 0000:00:17.0: Enabling HT MSI Mapping > [ 0.284819] pci 0000:02:00.0: Boot video device > [ 0.284831] PCI: CLS 32 bytes, default 64 > [ 0.285098] Trying to unpack rootfs image as initramfs... > [ 0.344652] audit: initializing netlink socket (disabled) > [ 0.344669] type=2000 audit(1341483327.344:1): initialized > [ 0.404317] HugeTLB registered 2 MB page size, pre-allocated 0 pages > [ 0.424439] VFS: Disk quotas dquot_6.5.2 > [ 0.424513] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) > [ 0.425308] fuse init (API version 7.16) > [ 0.425414] msgmni has been set to 1963 > [ 0.440402] Block layer SCSI generic (bsg) driver version 0.4 > loaded (major 253) > [ 0.440477] io scheduler noop registered > [ 0.440480] io scheduler deadline registered > [ 0.440534] io scheduler cfq registered (default) > [ 0.440728] pcieport 0000:00:03.0: setting latency timer to 64 > [ 0.440760] pcieport 0000:00:03.0: irq 40 for MSI/MSI-X > [ 0.444244] pcieport 0000:00:04.0: setting latency timer to 64 > [ 0.444282] pcieport 0000:00:04.0: irq 41 for MSI/MSI-X > [ 0.444432] pcieport 0000:00:12.0: setting latency timer to 64 > [ 0.444466] pcieport 0000:00:12.0: irq 42 for MSI/MSI-X > [ 0.448208] pcieport 0000:00:14.0: setting latency timer to 64 > [ 0.448254] pcieport 0000:00:14.0: irq 43 for MSI/MSI-X > [ 0.448412] pcieport 0000:00:16.0: setting latency timer to 64 > [ 0.448442] pcieport 0000:00:16.0: irq 44 for MSI/MSI-X > [ 0.452176] pcieport 0000:00:17.0: setting latency timer to 64 > [ 0.452222] pcieport 0000:00:17.0: irq 45 for MSI/MSI-X > [ 0.452360] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 > [ 0.452392] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 > [ 0.452556] input: Power Button as > /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 > [ 0.452563] ACPI: Power Button [PWRB] > [ 0.452629] input: Power Button as > /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 > [ 0.452632] ACPI: Power Button [PWRF] > [ 0.452690] ACPI: Fan [FAN] (on) > [ 0.452701] ACPI: acpi_idle registered with cpuidle > [ 0.456108] thermal LNXTHERM:00: registered as thermal_zone0 > [ 0.456111] ACPI: Thermal Zone [THRM] (40 C) > [ 0.456141] ERST: Table is not found! > [ 0.456253] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled > [ 0.476673] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A > [ 0.517837] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A > [ 0.540414] Linux agpgart interface v0.103 > [ 0.541735] brd: module loaded > [ 0.542323] loop: module loaded > [ 0.548199] pata_acpi 0000:00:0c.0: setting latency timer to 64 > [ 0.548563] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23 > [ 0.548588] pata_acpi 0000:00:0d.0: PCI INT A -> Link[APSI] -> GSI > 23 (level, low) -> IRQ 23 > [ 0.548612] pata_acpi 0000:00:0d.0: setting latency timer to 64 > [ 0.548621] pata_acpi 0000:00:0d.0: PCI INT A disabled > [ 0.548822] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 22 > [ 0.548834] pata_acpi 0000:00:0d.1: PCI INT B -> Link[APSJ] -> GSI > 22 (level, low) -> IRQ 22 > [ 0.548852] pata_acpi 0000:00:0d.1: setting latency timer to 64 > [ 0.548860] pata_acpi 0000:00:0d.1: PCI INT B disabled > [ 0.552361] ACPI: PCI Interrupt Link [ASA2] enabled at IRQ 21 > [ 0.552388] pata_acpi 0000:00:0d.2: PCI INT C -> Link[ASA2] -> GSI > 21 (level, low) -> IRQ 21 > [ 0.552432] pata_acpi 0000:00:0d.2: setting latency timer to 64 > [ 0.552447] pata_acpi 0000:00:0d.2: PCI INT C disabled > [ 0.560554] Fixed MDIO Bus: probed > [ 0.560588] PPP generic driver version 2.4.2 > [ 0.560665] tun: Universal TUN/TAP device driver, 1.6 > [ 0.560667] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> > [ 0.560794] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver > [ 0.561141] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 20 > [ 0.561166] ehci_hcd 0000:00:0a.1: PCI INT B -> Link[APCL] -> GSI > 20 (level, low) -> IRQ 20 > [ 0.561191] ehci_hcd 0000:00:0a.1: setting latency timer to 64 > [ 0.561195] ehci_hcd 0000:00:0a.1: EHCI Host Controller > [ 0.561250] ehci_hcd 0000:00:0a.1: new USB bus registered, assigned > bus number 1 > [ 0.561282] ehci_hcd 0000:00:0a.1: debug port 1 > [ 0.561291] ehci_hcd 0000:00:0a.1: cache line size of 32 is not supported > [ 0.561321] ehci_hcd 0000:00:0a.1: irq 20, io mem 0xfe02e000 > [ 0.572237] ehci_hcd 0000:00:0a.1: USB 2.0 started, EHCI 1.00 > [ 0.572474] hub 1-0:1.0: USB hub found > [ 0.572480] hub 1-0:1.0: 10 ports detected > [ 0.572634] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver > [ 0.576406] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23 > [ 0.576417] ohci_hcd 0000:00:0a.0: PCI INT A -> Link[APCF] -> GSI > 23 (level, low) -> IRQ 23 > [ 0.576445] ohci_hcd 0000:00:0a.0: setting latency timer to 64 > [ 0.576449] ohci_hcd 0000:00:0a.0: OHCI Host Controller > [ 0.576545] ohci_hcd 0000:00:0a.0: new USB bus registered, assigned > bus number 2 > [ 0.576597] ohci_hcd 0000:00:0a.0: irq 23, io mem 0xfe02f000 > [ 0.634403] hub 2-0:1.0: USB hub found > [ 0.634413] hub 2-0:1.0: 10 ports detected > [ 0.634541] uhci_hcd: USB Universal Host Controller Interface driver > [ 0.634647] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 > [ 0.634649] i8042: PNP: PS/2 appears to have AUX port disabled, if > this is incorrect please boot with i8042.nopnp > [ 0.634812] serio: i8042 KBD port at 0x60,0x64 irq 1 > [ 0.634905] mousedev: PS/2 mouse device common for all mice > [ 0.635028] rtc_cmos 00:04: RTC can wake from S4 > [ 0.635158] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 > [ 0.635192] rtc0: alarms up to one year, y3k, 242 bytes nvram > [ 0.635323] device-mapper: uevent: version 1.0.3 > [ 0.635409] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) > initialised: dm-devel@redhat.com > [ 0.635422] cpuidle: using governor ladder > [ 0.635424] cpuidle: using governor menu > [ 0.635426] EFI Variables Facility v0.08 2004-May-17 > [ 0.635689] TCP cubic registered > [ 0.635836] NET: Registered protocol family 10 > [ 0.636519] NET: Registered protocol family 17 > [ 0.636542] Registering the dns_resolver key type > [ 0.636666] PM: Hibernation image not present or could not be loaded. > [ 0.636680] registered taskstats version 1 > [ 0.658231] input: AT Translated Set 2 keyboard as > /devices/platform/i8042/serio0/input/input2 > [ 0.719135] Freeing initrd memory: 13416k freed > [ 0.736443] Magic number: 4:160:274 > [ 0.736494] tty tty11: hash matches > [ 0.736575] rtc_cmos 00:04: setting system clock to 2012-07-05 > 10:15:28 UTC (1341483328) > [ 0.736581] powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3200+ > (1 cpu cores) (version 2.20.00) > [ 0.742743] [Firmware Bug]: powernow-k8: No PSB or ACPI _PSS objects > [ 0.742745] powernow-k8: Make sure that your BIOS is up to date and > Cool'N'Quiet support is enabled in BIOS setup > [ 0.742785] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found > [ 0.742787] EDD information not available. > [ 0.745106] Freeing unused kernel memory: 984k freed > [ 0.745639] Write protecting the kernel read-only data: 10240k > [ 0.745920] Freeing unused kernel memory: 20k freed > [ 0.751792] Freeing unused kernel memory: 1400k freed > [ 0.781490] udevd[128]: starting version 173 > [ 0.936395] Floppy drive(s): fd0 is 1.44M > [ 0.940091] usb 1-9: new high speed USB device number 3 using ehci_hcd > [ 0.955957] FDC 0 is a post-1991 82077 > [ 1.072155] sata_nv 0000:00:0d.0: version 3.5 > [ 1.072178] sata_nv 0000:00:0d.0: PCI INT A -> Link[APSI] -> GSI 23 > (level, low) -> IRQ 23 > [ 1.072182] sata_nv 0000:00:0d.0: Using SWNCQ mode > [ 1.072254] sata_nv 0000:00:0d.0: setting latency timer to 64 > [ 1.075515] scsi0 : sata_nv > [ 1.078274] scsi1 : sata_nv > [ 1.078464] ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xdc00 irq 23 > [ 1.078468] ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xdc08 irq 23 > [ 1.082123] sata_nv 0000:00:0d.1: PCI INT B -> Link[APSJ] -> GSI 22 > (level, low) -> IRQ 22 > [ 1.082128] sata_nv 0000:00:0d.1: Using SWNCQ mode > [ 1.082190] sata_nv 0000:00:0d.1: setting latency timer to 64 > [ 1.083654] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) > [ 1.085284] scsi2 : sata_nv > [ 1.085422] scsi3 : sata_nv > [ 1.085569] ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xc800 irq 22 > [ 1.085573] ata4: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xc808 irq 22 > [ 1.088699] sata_nv 0000:00:0d.2: PCI INT C -> Link[ASA2] -> GSI 21 > (level, low) -> IRQ 21 > [ 1.088705] sata_nv 0000:00:0d.2: Using SWNCQ mode > [ 1.088766] sata_nv 0000:00:0d.2: setting latency timer to 64 > [ 1.091302] scsi4 : sata_nv > [ 1.092468] 8139cp 0000:03:07.0: This (id 10ec:8139 rev 10) is not > an 8139C+ compatible chip, use 8139too > [ 1.092511] scsi5 : sata_nv > [ 1.092691] ata5: SATA max UDMA/133 cmd 0xc400 ctl 0xc000 bmdma 0xb400 irq 21 > [ 1.092695] ata6: SATA max UDMA/133 cmd 0xbc00 ctl 0xb800 bmdma 0xb408 irq 21 > [ 1.096098] forcedeth: Reverse Engineered nForce ethernet driver. > Version 0.64. > [ 1.096346] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22 > [ 1.096354] forcedeth 0000:00:10.0: PCI INT A -> Link[APCH] -> GSI > 22 (level, low) -> IRQ 22 > [ 1.096360] forcedeth 0000:00:10.0: setting latency timer to 64 > [ 1.105488] sata_sil24 0000:06:00.0: version 1.1 > [ 1.105719] ACPI: PCI Interrupt Link [APC7] enabled at IRQ 16 > [ 1.105742] sata_sil24 0000:06:00.0: PCI INT A -> Link[APC7] -> GSI > 16 (level, low) -> IRQ 16 > [ 1.105817] sata_sil24 0000:06:00.0: setting latency timer to 64 > [ 1.108129] scsi6 : sata_sil24 > [ 1.110239] scsi7 : sata_sil24 > [ 1.110314] ata7: SATA max UDMA/100 host m128@0xfdeff000 port > 0xfdef8000 irq 16 > [ 1.110319] ata8: SATA max UDMA/100 host m128@0xfdeff000 port > 0xfdefa000 irq 16 > [ 1.384023] usb 2-4: new low speed USB device number 2 using ohci_hcd > [ 1.388026] ata1: SATA link down (SStatus 0 SControl 300) > [ 1.400025] ata3: SATA link down (SStatus 0 SControl 300) > [ 1.404022] ata5: SATA link down (SStatus 0 SControl 300) > [ 1.620740] forcedeth 0000:00:10.0: ifname eth0, PHY OUI 0x5043 @ > 1, addr 00:18:f3:91:04:61 > [ 1.620746] forcedeth 0000:00:10.0: highdma csum vlan pwrctl mgmt > gbit lnktim msi desc-v3 > [ 1.621174] ACPI: PCI Interrupt Link [AMC1] enabled at IRQ 21 > [ 1.621182] forcedeth 0000:00:11.0: PCI INT A -> Link[AMC1] -> GSI > 21 (level, low) -> IRQ 21 > [ 1.621188] forcedeth 0000:00:11.0: setting latency timer to 64 > [ 1.856034] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) > [ 1.864394] ata2.00: ATA-8: ST3500413AS, JC45, max UDMA/133 > [ 1.864397] ata2.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 31/32) > [ 1.880387] ata2.00: configured for UDMA/133 > [ 1.880521] scsi 1:0:0:0: Direct-Access ATA ST3500413AS > JC45 PQ: 0 ANSI: 5 > [ 1.880726] sd 1:0:0:0: Attached scsi generic sg0 type 0 > [ 1.880864] sd 1:0:0:0: [sda] 976773168 512-byte logical blocks: > (500 GB/465 GiB) > [ 1.880919] sd 1:0:0:0: [sda] Write Protect is off > [ 1.880923] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 > [ 1.880947] sd 1:0:0:0: [sda] Write cache: enabled, read cache: > enabled, doesn't support DPO or FUA > [ 1.927481] sda: sda1 < sda5 sda6 > sda2 sda3 sda4 > [ 1.928075] sd 1:0:0:0: [sda] Attached SCSI disk > [ 2.144831] forcedeth 0000:00:11.0: ifname eth1, PHY OUI 0x5043 @ > 1, addr 00:18:f3:91:0e:29 > [ 2.144837] forcedeth 0000:00:11.0: highdma csum vlan pwrctl mgmt > gbit lnktim msi desc-v3 > [ 2.145185] pata_amd 0000:00:0c.0: version 0.4.1 > [ 2.145239] pata_amd 0000:00:0c.0: setting latency timer to 64 > [ 2.145780] scsi8 : pata_amd > [ 2.145904] scsi9 : pata_amd > [ 2.146407] ata9: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14 > [ 2.146410] ata10: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15 > [ 2.192030] ata4: SATA link down (SStatus 0 SControl 300) > [ 2.340297] ata9.01: ATAPI: TSSTcorp CD-ROM SH-C522C, TS03, max UDMA/33 > [ 2.340307] ata9: nv_mode_filter: 0x739f&0x739f->0x739f, > BIOS=0x7000 (0xc00000) ACPI=0x701f (600:60:0x1c) > [ 2.380226] ata9.01: configured for UDMA/33 > [ 2.504023] ata6: SATA link down (SStatus 0 SControl 300) > [ 3.192034] ata7: SATA link down (SStatus 0 SControl 0) > [ 5.272040] ata8: SATA link down (SStatus 0 SControl 0) > [ 5.272939] scsi 8:0:1:0: CD-ROM TSSTcorp CD-ROM > SH-C522C TS03 PQ: 0 ANSI: 5 > [ 5.274823] sr0: scsi3-mmc drive: 52x/52x cd/rw xa/form2 cdda tray > [ 5.274827] cdrom: Uniform CD-ROM driver Revision: 3.20 > [ 5.274977] sr 8:0:1:0: Attached scsi CD-ROM sr0 > [ 5.275052] sr 8:0:1:0: Attached scsi generic sg1 type 5 > [ 5.275125] ata10: port disabled. ignoring. > [ 5.276568] 8139too: 8139too Fast Ethernet driver 0.9.28 > [ 5.281197] ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17 > [ 5.281223] 8139too 0000:03:07.0: PCI INT A -> Link[APC2] -> GSI 17 > (level, low) -> IRQ 17 > [ 5.282164] 8139too 0000:03:07.0: eth2: RealTek RTL8139 at 0x9c00, > 00:80:48:5c:e6:a2, IRQ 17 > [ 5.286270] ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16 > [ 5.286280] firewire_ohci 0000:03:0b.0: PCI INT A -> Link[APC1] -> > GSI 16 (level, low) -> IRQ 16 > [ 5.293641] input: Logitech USB Optical Mouse as > /devices/pci0000:00/0000:00:0a.0/usb2/2-4/2-4:1.0/input/input3 > [ 5.293879] generic-usb 0003:046D:C05A.0001: input,hidraw0: USB HID > v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:0a.0-4/input0 > [ 5.293902] usbcore: registered new interface driver usbhid > [ 5.293905] usbhid: USB HID core driver > [ 5.340080] firewire_ohci: Added fw-ohci device 0000:03:0b.0, OHCI > v1.10, 4 IR + 8 IT contexts, quirks 0x2 > [ 5.728585] EXT4-fs (sda2): INFO: recovery required on readonly filesystem > [ 5.728590] EXT4-fs (sda2): write access will be enabled during recovery > [ 5.840621] firewire_core: created device fw0: GUID 0011d80000ec6fc1, S400 > [ 7.195079] EXT4-fs (sda2): orphan cleanup on readonly fs > [ 7.195094] EXT4-fs (sda2): ext4_orphan_cleanup: deleting > unreferenced inode 4857639 > [ 7.195135] EXT4-fs (sda2): ext4_orphan_cleanup: deleting > unreferenced inode 4857637 > [ 7.195203] EXT4-fs (sda2): ext4_orphan_cleanup: deleting > unreferenced inode 4857631 > [ 7.195218] EXT4-fs (sda2): ext4_orphan_cleanup: deleting > unreferenced inode 4857627 > [ 7.195232] EXT4-fs (sda2): ext4_orphan_cleanup: deleting > unreferenced inode 4857597 > [ 7.195246] EXT4-fs (sda2): ext4_orphan_cleanup: deleting > unreferenced inode 4850628 > [ 7.195260] EXT4-fs (sda2): ext4_orphan_cleanup: deleting > unreferenced inode 4857592 > [ 7.195274] EXT4-fs (sda2): ext4_orphan_cleanup: deleting > unreferenced inode 4857583 > [ 7.195290] EXT4-fs (sda2): ext4_orphan_cleanup: deleting > unreferenced inode 13893783 > [ 7.195304] EXT4-fs (sda2): ext4_orphan_cleanup: deleting > unreferenced inode 13893706 > [ 7.195318] EXT4-fs (sda2): ext4_orphan_cleanup: deleting > unreferenced inode 4857595 > [ 7.195331] EXT4-fs (sda2): ext4_orphan_cleanup: deleting > unreferenced inode 4857585 > [ 7.195344] EXT4-fs (sda2): ext4_orphan_cleanup: deleting > unreferenced inode 4857579 > [ 7.195358] EXT4-fs (sda2): ext4_orphan_cleanup: deleting > unreferenced inode 4857416 > [ 7.195382] EXT4-fs (sda2): ext4_orphan_cleanup: deleting > unreferenced inode 4850568 > [ 7.195396] EXT4-fs (sda2): ext4_orphan_cleanup: deleting > unreferenced inode 4857636 > [ 7.195408] EXT4-fs (sda2): ext4_orphan_cleanup: deleting > unreferenced inode 4857607 > [ 7.195420] EXT4-fs (sda2): 17 orphan inodes deleted > [ 7.195423] EXT4-fs (sda2): recovery complete > [ 7.390720] EXT4-fs (sda2): mounted filesystem with ordered data > mode. Opts: (null) > [ 17.609843] udevd[430]: starting version 173 > [ 17.678138] Adding 1046524k swap on /dev/sda4. Priority:-1 > extents:1 across:1046524k > [ 17.685130] lp: driver loaded but no devices found > [ 17.717282] Adding 3905532k swap on /dev/sda6. Priority:-2 > extents:1 across:3905532k > [ 17.944071] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro > [ 18.120312] parport_pc 00:09: reported by Plug and Play ACPI > [ 18.120344] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP] > [ 18.257270] type=1400 audit(1341463546.017:2): apparmor="STATUS" > operation="profile_load" name="/sbin/dhclient" pid=597 > comm="apparmor_parser" > [ 18.258326] type=1400 audit(1341463546.017:3): apparmor="STATUS" > operation="profile_load" > name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=597 > comm="apparmor_parser" > [ 18.258670] type=1400 audit(1341463546.017:4): apparmor="STATUS" > operation="profile_load" > name="/usr/lib/connman/scripts/dhclient-script" pid=597 > comm="apparmor_parser" > [ 18.292885] lp0: using parport0 (interrupt-driven). > [ 18.631761] 8139too 0000:03:07.0: eth2: link down > [ 18.632622] ADDRCONF(NETDEV_UP): eth2: link is not ready > [ 18.649923] forcedeth 0000:00:10.0: irq 46 for MSI/MSI-X > [ 18.650131] forcedeth 0000:00:10.0: eth0: no link during initialization > [ 18.652588] ADDRCONF(NETDEV_UP): eth0: link is not ready > [ 18.671024] forcedeth 0000:00:11.0: irq 47 for MSI/MSI-X > [ 18.671233] forcedeth 0000:00:11.0: eth1: no link during initialization > [ 18.675447] ADDRCONF(NETDEV_UP): eth1: link is not ready > [ 18.788941] wmi: Mapper loaded > [ 18.797503] i2c i2c-0: nForce2 SMBus adapter at 0x1c00 > [ 18.797554] i2c i2c-1: nForce2 SMBus adapter at 0x1c40 > [ 18.799984] NV_TCO: NV TCO WatchDog Timer Driver v0.01 > [ 18.800497] NV_TCO: Watchdog reboot not detected. > [ 18.801744] NV_TCO: initialized (0x1440). heartbeat=30 sec (nowayout=0) > [ 18.931558] [drm] Initialized drm 1.1.0 20060810 > [ 19.053511] MCE: In-kernel MCE decoding enabled. > [ 19.072466] EDAC MC: Ver: 2.1.0 > [ 19.075335] cfg80211: Calling CRDA to update world regulatory domain > [ 19.086226] k8temp 0000:00:18.3: Temperature readouts might be > wrong - check erratum #141 > [ 19.107406] AMD64 EDAC driver v3.4.0 > [ 19.115078] EDAC amd64: DRAM ECC disabled. > [ 19.115086] EDAC amd64: ECC disabled in the BIOS or no ECC > capability, module will not load. > [ 19.115088] Either enable ECC checking or force module loading by > setting 'ecc_enable_override'. > [ 19.115090] (Note that use of the override may cause unknown side effects.) > [ 19.136313] ACPI: PCI Interrupt Link [APC5] enabled at IRQ 16 > [ 19.136324] nouveau 0000:02:00.0: PCI INT A -> Link[APC5] -> GSI 16 > (level, low) -> IRQ 16 > [ 19.136330] nouveau 0000:02:00.0: setting latency timer to 64 > [ 19.137724] [drm] nouveau 0000:02:00.0: Detected an NV40 generation > card (0x044100a2) > [ 19.139271] [drm] nouveau 0000:02:00.0: Attempting to load BIOS > image from PRAMIN > [ 19.219623] [drm] nouveau 0000:02:00.0: ... appears to be valid > [ 19.219627] [drm] nouveau 0000:02:00.0: BIT BIOS found > [ 19.219631] [drm] nouveau 0000:02:00.0: Bios version 05.44.02.14 > [ 19.219635] [drm] nouveau 0000:02:00.0: TMDS table version 1.1 > [ 19.219638] [drm] nouveau 0000:02:00.0: BIT table 'd' not found > [ 19.219641] [drm] nouveau 0000:02:00.0: Found Display Configuration > Block version 3.0 > [ 19.219645] [drm] nouveau 0000:02:00.0: Raw DCB entry 0: 01000300 00000028 > [ 19.219649] [drm] nouveau 0000:02:00.0: Raw DCB entry 1: 02011310 00000028 > [ 19.219652] [drm] nouveau 0000:02:00.0: Raw DCB entry 2: 01011312 00000000 > [ 19.219654] [drm] nouveau 0000:02:00.0: Raw DCB entry 3: 020203f1 0080c033 > [ 19.219658] [drm] nouveau 0000:02:00.0: DCB connector table: VHER 0x30 5 7 2 > [ 19.219667] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 0 > at offset 0xEC14 > [ 19.219846] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 1 > at offset 0xEEE9 > [ 19.232970] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 2 > at offset 0xF321 > [ 19.232994] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 3 > at offset 0xF47E > [ 19.234105] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 4 > at offset 0xF52C > [ 19.234109] [drm] nouveau 0000:02:00.0: mem timing table length unknown: 14 > [ 19.234116] [drm] nouveau 0000:02:00.0: timingset 255 does not exist > [ 19.283633] [drm] nouveau 0000:02:00.0: 1 available performance level(s) > [ 19.283641] [drm] nouveau 0000:02:00.0: 0: memory 400MHz core > 350MHz fanspeed 100% > [ 19.283652] [drm] nouveau 0000:02:00.0: c: memory 399MHz core 199MHz > [ 19.285459] [TTM] Zone kernel: Available graphics memory: 510670 kiB. > [ 19.285463] [TTM] Initializing pool allocator. > [ 19.285485] [drm] nouveau 0000:02:00.0: Detected 128MiB VRAM > [ 19.291005] [drm] nouveau 0000:02:00.0: 512 MiB GART (aperture) > [ 19.302265] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). > [ 19.302269] [drm] No driver support for vblank timestamp query. > [ 19.302751] [drm] nouveau 0000:02:00.0: Setting dpms mode 3 on vga > encoder (output 0) > [ 19.302755] [drm] nouveau 0000:02:00.0: Setting dpms mode 3 on vga > encoder (output 1) > [ 19.302759] [drm] nouveau 0000:02:00.0: Setting dpms mode 3 on tmds > encoder (output 2) > [ 19.302762] [drm] nouveau 0000:02:00.0: Setting dpms mode 3 on TV > encoder (output 3) > [ 19.476604] [drm:drm_edid_block_valid] *ERROR* EDID checksum is > invalid, remainder is 65 > [ 19.476609] Raw EDID: > [ 19.476613] <3>ff ff ff ff ff 00 4c 2d 17 01 37 31 52 41 02 12 > ......L-..71RA.. > [ 19.476616] <3>01 03 68 1f 17 78 2e ee 91 a3 54 4c 99 26 0f 50 > ..h..x....TL.&.P > [ 19.476619] <3>54 bf ee 80 61 59 45 59 31 59 81 80 71 4f 01 01 > T...aYEY1Y..qO.. > [ 19.476621] <3>01 01 01 01 ea 24 00 60 41 00 28 30 30 60 13 00 > .....$.`A.(00`.. > [ 19.476624] <3>38 ea 10 00 00 1e 00 00 00 fd 00 32 a0 1e 47 0b > 8..........2..G. > [ 19.476626] <3>00 0a 20 20 20 20 20 20 00 00 00 fc 00 53 79 6e .. > .....Syn > [ 19.476629] <3>63 4d 61 73 74 65 72 0a 20 20 00 00 00 ff 00 48 > cMaster. .....H > [ 19.476632] <3>48 41 51 31 30 39 32 33 36 0a 20 20 00 22 40 00 > HAQ109236. ."@. > [ 19.476634] > [ 20.004439] [drm] nouveau 0000:02:00.0: allocated 1024x768 fb: > 0x49000, bo ffff88003c2e1c00 > [ 20.004561] fbcon: nouveaufb (fb0) is primary device > [ 20.004647] Console: switching to colour frame buffer device 128x48 > [ 20.004672] fb0: nouveaufb frame buffer device > [ 20.004674] drm: registered panic notifier > [ 20.004684] [drm] Initialized nouveau 0.0.16 20090420 for > 0000:02:00.0 on minor 0 > [ 20.018971] cfg80211: Updating information on frequency 2412 MHz > for a 20 MHz width channel with regulatory rule: > [ 20.018976] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm) > [ 20.018979] cfg80211: Updating information on frequency 2417 MHz > for a 20 MHz width channel with regulatory rule: > [ 20.018982] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm) > [ 20.018985] cfg80211: Updating information on frequency 2422 MHz > for a 20 MHz width channel with regulatory rule: > [ 20.018988] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm) > [ 20.018990] cfg80211: Updating information on frequency 2427 MHz > for a 20 MHz width channel with regulatory rule: > [ 20.018993] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm) > [ 20.018996] cfg80211: Updating information on frequency 2432 MHz > for a 20 MHz width channel with regulatory rule: > [ 20.018999] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm) > [ 20.019001] cfg80211: Updating information on frequency 2437 MHz > for a 20 MHz width channel with regulatory rule: > [ 20.019004] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm) > [ 20.019007] cfg80211: Updating information on frequency 2442 MHz > for a 20 MHz width channel with regulatory rule: > [ 20.019010] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm) > [ 20.019012] cfg80211: Updating information on frequency 2447 MHz > for a 20 MHz width channel with regulatory rule: > [ 20.019015] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm) > [ 20.019018] cfg80211: Updating information on frequency 2452 MHz > for a 20 MHz width channel with regulatory rule: > [ 20.019021] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm) > [ 20.019023] cfg80211: Updating information on frequency 2457 MHz > for a 20 MHz width channel with regulatory rule: > [ 20.019026] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm) > [ 20.019029] cfg80211: Updating information on frequency 2462 MHz > for a 20 MHz width channel with regulatory rule: > [ 20.019032] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm) > [ 20.019034] cfg80211: Updating information on frequency 2467 MHz > for a 20 MHz width channel with regulatory rule: > [ 20.019038] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (600 mBi, 2000 mBm) > [ 20.019040] cfg80211: Updating information on frequency 2472 MHz > for a 20 MHz width channel with regulatory rule: > [ 20.019043] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (600 mBi, 2000 mBm) > [ 20.019046] cfg80211: Updating information on frequency 2484 MHz > for a 20 MHz width channel with regulatory rule: > [ 20.019049] cfg80211: 2474000 KHz - 2494000 KHz @ KHz), (600 mBi, 2000 mBm) > [ 20.062553] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' > [ 20.068259] ieee80211 phy0: hwaddr 00:15:af:09:cf:bc, RTL8187vB > (default) V1 + rtl8225z2, rfkill mask 2 > [ 20.090376] rtl8187: Customer ID is 0x00 > [ 20.090502] Registered led device: rtl8187-phy0::radio > [ 20.090546] Registered led device: rtl8187-phy0::tx > [ 20.090597] Registered led device: rtl8187-phy0::rx > [ 20.091480] rtl8187: wireless switch is on > [ 20.091606] usbcore: registered new interface driver rtl8187 > [ 20.204900] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 20 > [ 20.204911] HDA Intel 0000:00:0e.1: PCI INT B -> Link[AAZA] -> GSI > 20 (level, low) -> IRQ 20 > [ 20.204915] hda_intel: msi for device 1043:81f6 set to 0 > [ 20.204955] HDA Intel 0000:00:0e.1: setting latency timer to 64 > [ 20.273135] type=1400 audit(1341463548.033:5): apparmor="STATUS" > operation="profile_load" > name="/usr/lib/lightdm/lightdm-guest-session-wrapper" pid=960 > comm="apparmor_parser" > [ 20.278014] type=1400 audit(1341463548.037:6): apparmor="STATUS" > operation="profile_replace" name="/sbin/dhclient" pid=968 > comm="apparmor_parser" > [ 20.280796] type=1400 audit(1341463548.041:7): apparmor="STATUS" > operation="profile_replace" > name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=968 > comm="apparmor_parser" > [ 20.281144] type=1400 audit(1341463548.041:8): apparmor="STATUS" > operation="profile_replace" > name="/usr/lib/connman/scripts/dhclient-script" pid=968 > comm="apparmor_parser" > [ 20.356095] ppdev: user-space parallel port driver > [ 20.398789] type=1400 audit(1341463548.157:9): apparmor="STATUS" > operation="profile_load" name="/usr/bin/evince" pid=969 > comm="apparmor_parser" > [ 20.439742] type=1400 audit(1341463548.197:10): apparmor="STATUS" > operation="profile_load" name="/usr/bin/evince-previewer" pid=969 > comm="apparmor_parser" > [ 20.462781] type=1400 audit(1341463548.221:11): apparmor="STATUS" > operation="profile_load" name="/usr/bin/evince-thumbnailer" pid=969 > comm="apparmor_parser" > [ 20.577367] cfg80211: Updating information on frequency 2412 MHz > for a 20 MHz width channel with regulatory rule: > [ 20.577373] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) > [ 20.577376] cfg80211: Updating information on frequency 2417 MHz > for a 20 MHz width channel with regulatory rule: > [ 20.577380] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) > [ 20.577382] cfg80211: Updating information on frequency 2422 MHz > for a 20 MHz width channel with regulatory rule: > [ 20.577385] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) > [ 20.577388] cfg80211: Updating information on frequency 2427 MHz > for a 20 MHz width channel with regulatory rule: > [ 20.577391] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) > [ 20.577393] cfg80211: Updating information on frequency 2432 MHz > for a 20 MHz width channel with regulatory rule: > [ 20.577396] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) > [ 20.577399] cfg80211: Updating information on frequency 2437 MHz > for a 20 MHz width channel with regulatory rule: > [ 20.577402] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) > [ 20.577404] cfg80211: Updating information on frequency 2442 MHz > for a 20 MHz width channel with regulatory rule: > [ 20.577407] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) > [ 20.577410] cfg80211: Updating information on frequency 2447 MHz > for a 20 MHz width channel with regulatory rule: > [ 20.577413] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) > [ 20.577415] cfg80211: Updating information on frequency 2452 MHz > for a 20 MHz width channel with regulatory rule: > [ 20.577418] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) > [ 20.577421] cfg80211: Updating information on frequency 2457 MHz > for a 20 MHz width channel with regulatory rule: > [ 20.577424] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) > [ 20.577426] cfg80211: Updating information on frequency 2462 MHz > for a 20 MHz width channel with regulatory rule: > [ 20.577429] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) > [ 20.577432] cfg80211: Updating information on frequency 2467 MHz > for a 20 MHz width channel with regulatory rule: > [ 20.577435] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (300 mBi, 2000 mBm) > [ 20.577437] cfg80211: Updating information on frequency 2472 MHz > for a 20 MHz width channel with regulatory rule: > [ 20.577440] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (300 mBi, 2000 mBm) > [ 20.577443] cfg80211: Updating information on frequency 2484 MHz > for a 20 MHz width channel with regulatory rule: > [ 20.577445] cfg80211: 2474000 KHz - 2494000 KHz @ KHz), (300 mBi, 2000 mBm) > [ 20.577449] cfg80211: World regulatory domain updated: > [ 20.577451] cfg80211: (start_freq - end_freq @ bandwidth), > (max_antenna_gain, max_eirp) > [ 20.577454] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), > (300 mBi, 2000 mBm) > [ 20.577457] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), > (300 mBi, 2000 mBm) > [ 20.577460] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), > (300 mBi, 2000 mBm) > [ 20.577463] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), > (300 mBi, 2000 mBm) > [ 20.577465] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), > (300 mBi, 2000 mBm) > [ 20.865411] init: failsafe main process (874) killed by TERM signal > [ 20.874553] init: apport pre-start process (1035) terminated with status 1 > [ 20.875814] init: alsa-restore main process (1039) terminated with status 19 > [ 20.940981] init: apport post-stop process (1061) terminated with status 1 > [ 21.186367] [drm:drm_edid_block_valid] *ERROR* EDID checksum is > invalid, remainder is 65 > [ 21.186372] Raw EDID: > [ 21.186375] <3>ff ff ff ff ff 00 4c 2d 17 01 37 31 52 41 02 12 > ......L-..71RA.. > [ 21.186378] <3>01 03 68 1f 17 78 2e ee 91 a3 54 4c 99 26 0f 50 > ..h..x....TL.&.P > [ 21.186380] <3>54 bf ee 80 61 59 45 59 31 59 81 80 71 4f 01 01 > T...aYEY1Y..qO.. > [ 21.186383] <3>01 01 01 01 ea 24 00 60 41 00 28 30 30 60 13 00 > .....$.`A.(00`.. > [ 21.186386] <3>38 ea 10 00 00 1e 00 00 00 fd 00 32 a0 1e 47 0b > 8..........2..G. > [ 21.186388] <3>00 0a 20 20 20 20 20 20 00 00 00 fc 00 53 79 6e .. > .....Syn > [ 21.186391] <3>63 4d 61 73 74 65 72 0a 20 20 00 00 00 ff 00 48 > cMaster. .....H > [ 21.186393] <3>48 41 51 31 30 39 32 33 36 0a 20 20 00 22 40 00 > HAQ109236. ."@. > [ 21.186395] > [ 21.546958] [drm:drm_edid_block_valid] *ERROR* EDID checksum is > invalid, remainder is 65 > [ 21.546963] Raw EDID: > [ 21.546966] <3>ff ff ff ff ff 00 4c 2d 17 01 37 31 52 41 02 12 > ......L-..71RA.. > [ 21.546969] <3>01 03 68 1f 17 78 2e ee 91 a3 54 4c 99 26 0f 50 > ..h..x....TL.&.P > [ 21.546972] <3>54 bf ee 80 61 59 45 59 31 59 81 80 71 4f 01 01 > T...aYEY1Y..qO.. > [ 21.546975] <3>01 01 01 01 ea 24 00 60 41 00 28 30 30 60 13 00 > .....$.`A.(00`.. > [ 21.546977] <3>38 ea 10 00 00 1e 00 00 00 fd 00 32 a0 1e 47 0b > 8..........2..G. > [ 21.546980] <3>00 0a 20 20 20 20 20 20 00 00 00 fc 00 53 79 6e .. > .....Syn > [ 21.546983] <3>63 4d 61 73 74 65 72 0a 20 20 00 00 00 ff 00 48 > cMaster. .....H > [ 21.546985] <3>48 41 51 31 30 39 32 33 36 0a 20 20 00 22 40 00 > HAQ109236. ."@. > [ 21.546987] > [ 21.716233] Bluetooth: Core ver 2.16 > [ 21.716360] NET: Registered protocol family 31 > [ 21.716362] Bluetooth: HCI device and connection manager initialized > [ 21.716366] Bluetooth: HCI socket layer initialized > [ 21.716368] Bluetooth: L2CAP socket layer initialized > [ 21.717277] Bluetooth: SCO socket layer initialized > [ 21.768895] Bluetooth: RFCOMM TTY layer initialized > [ 21.768903] Bluetooth: RFCOMM socket layer initialized > [ 21.768905] Bluetooth: RFCOMM ver 1.11 > [ 21.829060] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 > [ 21.829066] Bluetooth: BNEP filters: protocol multicast > [ 21.885383] [drm] nouveau 0000:02:00.0: Setting dpms mode 0 on vga > encoder (output 0) > [ 21.885390] [drm] nouveau 0000:02:00.0: Output VGA-1 is running on > CRTC 0 using output A > [ 23.243710] [drm:drm_edid_block_valid] *ERROR* EDID checksum is > invalid, remainder is 65 > [ 23.243716] Raw EDID: > [ 23.243719] <3>ff ff ff ff ff 00 4c 2d 17 01 37 31 52 41 02 12 > ......L-..71RA.. > [ 23.243722] <3>01 03 68 1f 17 78 2e ee 91 a3 54 4c 99 26 0f 50 > ..h..x....TL.&.P > [ 23.243725] <3>54 bf ee 80 61 59 45 59 31 59 81 80 71 4f 01 01 > T...aYEY1Y..qO.. > [ 23.243727] <3>01 01 01 01 ea 24 00 60 41 00 28 30 30 60 13 00 > .....$.`A.(00`.. > [ 23.243730] <3>38 ea 10 00 00 1e 00 00 00 fd 00 32 a0 1e 47 0b > 8..........2..G. > [ 23.243732] <3>00 0a 20 20 20 20 20 20 00 00 00 fc 00 53 79 6e .. > .....Syn > [ 23.243735] <3>63 4d 61 73 74 65 72 0a 20 20 00 00 00 ff 00 48 > cMaster. .....H > [ 23.243738] <3>48 41 51 31 30 39 32 33 36 0a 20 20 00 22 40 00 > HAQ109236. ."@. > [ 23.243739] > [ 23.558169] [drm:drm_edid_block_valid] *ERROR* EDID checksum is > invalid, remainder is 170 > [ 23.558174] Raw EDID: > [ 23.558178] <3>ff ff ff ff ff 00 4c 2d 17 01 37 31 52 41 02 12 > ......L-..71RA.. > [ 23.558180] <3>01 03 68 1f 17 78 2e ee 91 a3 54 4c 99 26 0f 50 > ..h..x....TL.&.P > [ 23.558183] <3>54 bf ee 80 61 59 45 59 31 59 81 80 71 4f 01 01 > T...aYEY1Y..qO.. > [ 23.558186] <3>01 01 01 01 ea 24 00 60 41 00 28 30 30 60 13 00 > .....$.`A.(00`.. > [ 23.558188] <3>38 ea 10 00 00 1e 00 00 00 fd 00 32 a0 1e 47 0b > 8..........2..G. > [ 23.558191] <3>00 0a 20 20 20 20 20 20 00 00 00 fc 00 53 79 6e .. > .....Syn > [ 23.558193] <3>63 4d 61 73 74 65 72 0a 20 20 00 00 00 ff 00 48 > cMaster. .....H > [ 23.558196] <3>48 41 51 31 30 39 32 33 36 0a 20 20 00 22 a9 00 > HAQ109236. .".. > [ 23.558198] > [ 23.668561] ADDRCONF(NETDEV_UP): wlan0: link is not ready > [ 23.906269] [drm:drm_edid_block_valid] *ERROR* EDID checksum is > invalid, remainder is 170 > [ 23.906274] Raw EDID: > [ 23.906277] <3>ff ff ff ff ff 00 4c 2d 17 01 37 31 52 41 02 12 > ......L-..71RA.. > [ 23.906280] <3>01 03 68 1f 17 78 2e ee 91 a3 54 4c 99 26 0f 50 > ..h..x....TL.&.P > [ 23.906283] <3>54 bf ee 80 61 59 45 59 31 59 81 80 71 4f 01 01 > T...aYEY1Y..qO.. > [ 23.906285] <3>01 01 01 01 ea 24 00 60 41 00 28 30 30 60 13 00 > .....$.`A.(00`.. > [ 23.906288] <3>38 ea 10 00 00 1e 00 00 00 fd 00 32 a0 1e 47 0b > 8..........2..G. > [ 23.906291] <3>00 0a 20 20 20 20 20 20 00 00 00 fc 00 53 79 6e .. > .....Syn > [ 23.906293] <3>63 4d 61 73 74 65 72 0a 20 20 00 00 00 ff 00 48 > cMaster. .....H > [ 23.906296] <3>48 41 51 31 30 39 32 33 36 0a 20 20 00 22 a9 00 > HAQ109236. .".. > [ 23.906298] > [ 24.391130] [drm:drm_edid_block_valid] *ERROR* EDID checksum is > invalid, remainder is 170 > [ 24.391135] Raw EDID: > [ 24.391139] <3>ff ff ff ff ff 00 4c 2d 17 01 37 31 52 41 02 12 > ......L-..71RA.. > [ 24.391142] <3>01 03 68 1f 17 78 2e ee 91 a3 54 4c 99 26 0f 50 > ..h..x....TL.&.P > [ 24.391145] <3>54 bf ee 80 61 59 45 59 31 59 81 80 71 4f 01 01 > T...aYEY1Y..qO.. > [ 24.391147] <3>01 01 01 01 ea 24 00 60 41 00 28 30 30 60 13 00 > .....$.`A.(00`.. > [ 24.391150] <3>38 ea 10 00 00 1e 00 00 00 fd 00 32 a0 1e 47 0b > 8..........2..G. > [ 24.391152] <3>00 0a 20 20 20 20 20 20 00 00 00 fc 00 53 79 6e .. > .....Syn > [ 24.391155] <3>63 4d 61 73 74 65 72 0a 20 20 00 00 00 ff 00 48 > cMaster. .....H > [ 24.391158] <3>48 41 51 31 30 39 32 33 36 0a 20 20 00 22 a9 00 > HAQ109236. .".. > [ 24.391160] > [ 24.794986] [drm:drm_edid_block_valid] *ERROR* EDID checksum is > invalid, remainder is 170 > [ 24.794991] Raw EDID: > [ 24.794995] <3>ff ff ff ff ff 00 4c 2d 17 01 37 31 52 41 02 12 > ......L-..71RA.. > [ 24.794998] <3>01 03 68 1f 17 78 2e ee 91 a3 54 4c 99 26 0f 50 > ..h..x....TL.&.P > [ 24.795000] <3>54 bf ee 80 61 59 45 59 31 59 81 80 71 4f 01 01 > T...aYEY1Y..qO.. > [ 24.795003] <3>01 01 01 01 ea 24 00 60 41 00 28 30 30 60 13 00 > .....$.`A.(00`.. > [ 24.795006] <3>38 ea 10 00 00 1e 00 00 00 fd 00 32 a0 1e 47 0b > 8..........2..G. > [ 24.795008] <3>00 0a 20 20 20 20 20 20 00 00 00 fc 00 53 79 6e .. > .....Syn > [ 24.795011] <3>63 4d 61 73 74 65 72 0a 20 20 00 00 00 ff 00 48 > cMaster. .....H > [ 24.795013] <3>48 41 51 31 30 39 32 33 36 0a 20 20 00 22 a9 00 > HAQ109236. .".. > [ 24.795015] > [ 25.060335] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro,commit=0 > [ 25.449511] init: plymouth-stop pre-start process (1448) terminated > with status 1 > [ 26.967958] [drm:drm_edid_block_valid] *ERROR* EDID checksum is > invalid, remainder is 170 > [ 26.967963] Raw EDID: > [ 26.967967] <3>ff ff ff ff ff 00 4c 2d 17 01 37 31 52 41 02 12 > ......L-..71RA.. > [ 26.967970] <3>01 03 68 1f 17 78 2e ee 91 a3 54 4c 99 26 0f 50 > ..h..x....TL.&.P > [ 26.967972] <3>54 bf ee 80 61 59 45 59 31 59 81 80 71 4f 01 01 > T...aYEY1Y..qO.. > [ 26.967975] <3>01 01 01 01 ea 24 00 60 41 00 28 30 30 60 13 00 > .....$.`A.(00`.. > [ 26.967978] <3>38 ea 10 00 00 1e 00 00 00 fd 00 32 a0 1e 47 0b > 8..........2..G. > [ 26.967980] <3>00 0a 20 20 20 20 20 20 00 00 00 fc 00 53 79 6e .. > .....Syn > [ 26.967983] <3>63 4d 61 73 74 65 72 0a 20 20 00 00 00 ff 00 48 > cMaster. .....H > [ 26.967985] <3>48 41 51 31 30 39 32 33 36 0a 20 20 00 22 a9 00 > HAQ109236. .".. > [ 26.967987] > [ 27.295395] [drm:drm_edid_block_valid] *ERROR* EDID checksum is > invalid, remainder is 170 > [ 27.295401] Raw EDID: > [ 27.295404] <3>ff ff ff ff ff 00 4c 2d 17 01 37 31 52 41 02 12 > ......L-..71RA.. > [ 27.295407] <3>01 03 68 1f 17 78 2e ee 91 a3 54 4c 99 26 0f 50 > ..h..x....TL.&.P > [ 27.295409] <3>54 bf ee 80 61 59 45 59 31 59 81 80 71 4f 01 01 > T...aYEY1Y..qO.. > [ 27.295412] <3>01 01 01 01 ea 24 00 60 41 00 28 30 30 60 13 00 > .....$.`A.(00`.. > [ 27.295414] <3>38 ea 10 00 00 1e 00 00 00 fd 00 32 a0 1e 47 0b > 8..........2..G. > [ 27.295417] <3>00 0a 20 20 20 20 20 20 00 00 00 fc 00 53 79 6e .. > .....Syn > [ 27.295420] <3>63 4d 61 73 74 65 72 0a 20 20 00 00 00 ff 00 48 > cMaster. .....H > [ 27.295422] <3>48 41 51 31 30 39 32 33 36 0a 20 20 00 22 a9 00 > HAQ109236. .".. > [ 27.295424] > [ 30.189439] [drm:drm_edid_block_valid] *ERROR* EDID checksum is > invalid, remainder is 41 > [ 30.189445] Raw EDID: > [ 30.189448] <3>ff ff ff ff ff 00 4c 2d 17 01 37 31 52 41 02 12 > ......L-..71RA.. > [ 30.189451] <3>01 03 68 1f 17 78 2e ee 91 a3 54 4c 99 26 0f 50 > ..h..x....TL.&.P > [ 30.189454] <3>54 bf ee 80 61 59 45 59 31 59 81 80 71 4f 01 01 > T...aYEY1Y..qO.. > [ 30.189456] <3>01 01 01 01 ea 24 00 60 41 00 28 30 30 60 13 00 > .....$.`A.(00`.. > [ 30.189459] <3>38 ea 10 00 00 1e 00 00 00 fd 00 32 a0 1e 47 0b > 8..........2..G. > [ 30.189461] <3>00 0a 20 20 20 20 20 20 00 00 00 fc 00 53 79 6e .. > .....Syn > [ 30.189464] <3>63 4d 61 73 74 65 72 0a 20 20 00 00 00 ff 00 48 > cMaster. .....H > [ 30.189466] <3>48 41 51 31 30 39 32 33 36 0a 20 20 00 22 28 00 > HAQ109236. ."(. > [ 30.189468] > [ 30.518309] [drm:drm_edid_block_valid] *ERROR* EDID checksum is > invalid, remainder is 41 > [ 30.518314] Raw EDID: > [ 30.518317] <3>ff ff ff ff ff 00 4c 2d 17 01 37 31 52 41 02 12 > ......L-..71RA.. > [ 30.518320] <3>01 03 68 1f 17 78 2e ee 91 a3 54 4c 99 26 0f 50 > ..h..x....TL.&.P > [ 30.518323] <3>54 bf ee 80 61 59 45 59 31 59 81 80 71 4f 01 01 > T...aYEY1Y..qO.. > [ 30.518326] <3>01 01 01 01 ea 24 00 60 41 00 28 30 30 60 13 00 > .....$.`A.(00`.. > [ 30.518328] <3>38 ea 10 00 00 1e 00 00 00 fd 00 32 a0 1e 47 0b > 8..........2..G. > [ 30.518331] <3>00 0a 20 20 20 20 20 20 00 00 00 fc 00 53 79 6e .. > .....Syn > [ 30.518333] <3>63 4d 61 73 74 65 72 0a 20 20 00 00 00 ff 00 48 > cMaster. .....H > [ 30.518336] <3>48 41 51 31 30 39 32 33 36 0a 20 20 00 22 28 00 > HAQ109236. ."(. > [ 30.518338] > [ 31.052805] [drm:drm_edid_block_valid] *ERROR* EDID checksum is > invalid, remainder is 41 > [ 31.052811] Raw EDID: > [ 31.052814] <3>ff ff ff ff ff 00 4c 2d 17 01 37 31 52 41 02 12 > ......L-..71RA.. > [ 31.052817] <3>01 03 68 1f 17 78 2e ee 91 a3 54 4c 99 26 0f 50 > ..h..x....TL.&.P > [ 31.052819] <3>54 bf ee 80 61 59 45 59 31 59 81 80 71 4f 01 01 > T...aYEY1Y..qO.. > [ 31.052822] <3>01 01 01 01 ea 24 00 60 41 00 28 30 30 60 13 00 > .....$.`A.(00`.. > [ 31.052824] <3>38 ea 10 00 00 1e 00 00 00 fd 00 32 a0 1e 47 0b > 8..........2..G. > [ 31.052827] <3>00 0a 20 20 20 20 20 20 00 00 00 fc 00 53 79 6e .. > .....Syn > [ 31.052830] <3>63 4d 61 73 74 65 72 0a 20 20 00 00 00 ff 00 48 > cMaster. .....H > [ 31.052832] <3>48 41 51 31 30 39 32 33 36 0a 20 20 00 22 28 00 > HAQ109236. ."(. > [ 31.052834] > [ 31.394156] [drm:drm_edid_block_valid] *ERROR* EDID checksum is > invalid, remainder is 41 > [ 31.394161] Raw EDID: > [ 31.394164] <3>ff ff ff ff ff 00 4c 2d 17 01 37 31 52 41 02 12 > ......L-..71RA.. > [ 31.394167] <3>01 03 68 1f 17 78 2e ee 91 a3 54 4c 99 26 0f 50 > ..h..x....TL.&.P > [ 31.394169] <3>54 bf ee 80 61 59 45 59 31 59 81 80 71 4f 01 01 > T...aYEY1Y..qO.. > [ 31.394172] <3>01 01 01 01 ea 24 00 60 41 00 28 30 30 60 13 00 > .....$.`A.(00`.. > [ 31.394175] <3>38 ea 10 00 00 1e 00 00 00 fd 00 32 a0 1e 47 0b > 8..........2..G. > [ 31.394177] <3>00 0a 20 20 20 20 20 20 00 00 00 fc 00 53 79 6e .. > .....Syn > [ 31.394180] <3>63 4d 61 73 74 65 72 0a 20 20 00 00 00 ff 00 48 > cMaster. .....H > [ 31.394182] <3>48 41 51 31 30 39 32 33 36 0a 20 20 00 22 28 00 > HAQ109236. ."(. > [ 31.394184] > [ 31.727736] [drm:drm_edid_block_valid] *ERROR* EDID checksum is > invalid, remainder is 41 > [ 31.727741] Raw EDID: > [ 31.727745] <3>ff ff ff ff ff 00 4c 2d 17 01 37 31 52 41 02 12 > ......L-..71RA.. > [ 31.727748] <3>01 03 68 1f 17 78 2e ee 91 a3 54 4c 99 26 0f 50 > ..h..x....TL.&.P > [ 31.727750] <3>54 bf ee 80 61 59 45 59 31 59 81 80 71 4f 01 01 > T...aYEY1Y..qO.. > [ 31.727753] <3>01 01 01 01 ea 24 00 60 41 00 28 30 30 60 13 00 > .....$.`A.(00`.. > [ 31.727756] <3>38 ea 10 00 00 1e 00 00 00 fd 00 32 a0 1e 47 0b > 8..........2..G. > [ 31.727758] <3>00 0a 20 20 20 20 20 20 00 00 00 fc 00 53 79 6e .. > .....Syn > [ 31.727761] <3>63 4d 61 73 74 65 72 0a 20 20 00 00 00 ff 00 48 > cMaster. .....H > [ 31.727763] <3>48 41 51 31 30 39 32 33 36 0a 20 20 00 22 28 00 > HAQ109236. ."(. > [ 31.727765] > [ 32.111167] [drm:drm_edid_block_valid] *ERROR* EDID checksum is > invalid, remainder is 41 > [ 32.111172] Raw EDID: > [ 32.111176] <3>ff ff ff ff ff 00 4c 2d 17 01 37 31 52 41 02 12 > ......L-..71RA.. > [ 32.111179] <3>01 03 68 1f 17 78 2e ee 91 a3 54 4c 99 26 0f 50 > ..h..x....TL.&.P > [ 32.111181] <3>54 bf ee 80 61 59 45 59 31 59 81 80 71 4f 01 01 > T...aYEY1Y..qO.. > [ 32.111184] <3>01 01 01 01 ea 24 00 60 41 00 28 30 30 60 13 00 > .....$.`A.(00`.. > [ 32.111187] <3>38 ea 10 00 00 1e 00 00 00 fd 00 32 a0 1e 47 0b > 8..........2..G. > [ 32.111189] <3>00 0a 20 20 20 20 20 20 00 00 00 fc 00 53 79 6e .. > .....Syn > [ 32.111192] <3>63 4d 61 73 74 65 72 0a 20 20 00 00 00 ff 00 48 > cMaster. .....H > [ 32.111194] <3>48 41 51 31 30 39 32 33 36 0a 20 20 00 22 28 00 > HAQ109236. ."(. > [ 32.111196] > [ 32.619148] [drm:drm_edid_block_valid] *ERROR* EDID checksum is > invalid, remainder is 41 > [ 32.619153] Raw EDID: > [ 32.619157] <3>ff ff ff ff ff 00 4c 2d 17 01 37 31 52 41 02 12 > ......L-..71RA.. > [ 32.619160] <3>01 03 68 1f 17 78 2e ee 91 a3 54 4c 99 26 0f 50 > ..h..x....TL.&.P > [ 32.619162] <3>54 bf ee 80 61 59 45 59 31 59 81 80 71 4f 01 01 > T...aYEY1Y..qO.. > [ 32.619165] <3>01 01 01 01 ea 24 00 60 41 00 28 30 30 60 13 00 > .....$.`A.(00`.. > [ 32.619168] <3>38 ea 10 00 00 1e 00 00 00 fd 00 32 a0 1e 47 0b > 8..........2..G. > [ 32.619170] <3>00 0a 20 20 20 20 20 20 00 00 00 fc 00 53 79 6e .. > .....Syn > [ 32.619173] <3>63 4d 61 73 74 65 72 0a 20 20 00 00 00 ff 00 48 > cMaster. .....H > [ 32.619175] <3>48 41 51 31 30 39 32 33 36 0a 20 20 00 22 28 00 > HAQ109236. ."(. > [ 32.619177] > > > lspci output: > > 07:00.0 Multimedia video controller: Texas Instruments Device b800 (rev 01) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 32 bytes > Interrupt: pin A routed to IRQ 11 > Region 0: Memory at fddff000 (64-bit, non-prefetchable) [size=4K] > Region 2: Memory at bf000000 (64-bit, prefetchable) [size=16M] > Region 4: Memory at 40000000 (64-bit, prefetchable) [size=1G] > Capabilities: [40] Power Management version 3 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+ > Address: 0000000000000000 Data: 0000 > Capabilities: [70] Express (v2) Endpoint, MSI 00 > DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <1us, L1 <8us > ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- > DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- > RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ > MaxPayload 128 bytes, MaxReadReq 512 bytes > DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr- TransPend- > LnkCap: Port #0, Speed 5GT/s, Width x2, ASPM L0s, Latency L0 <512ns, L1 <64us > ClockPM- Surprise- LLActRep- BwNot- > LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- > LnkSta: Speed 2.5GT/s, Width x2, TrErr- Train- SlotClk+ DLActive- > BWMgmt- ABWMgmt- > DevCap2: Completion Timeout: Range ABCD, TimeoutDis+ > DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- > LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, > Selectable De-emphasis: -6dB > Transmit Margin: Normal Operating Range, EnterModifiedCompliance- > ComplianceSOS- > Compliance De-emphasis: -6dB > LnkSta2: Current De-emphasis Level: -3.5dB > Capabilities: [100 v1] Advanced Error Reporting > UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- > MalfTLP- ECRC- UnsupReq- ACSViol- > UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- > MalfTLP- ECRC- UnsupReq- ACSViol- > UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ > MalfTLP+ ECRC- UnsupReq- ACSViol- > CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+ > CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+ > AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn- > 00: 4c 10 00 b8 07 00 10 00 01 00 00 04 08 00 00 00 > 10: 04 f0 df fd 00 00 00 00 0c 00 00 bf 00 00 00 00 > 20: 0c 00 00 40 00 00 00 00 00 00 00 00 00 00 01 00 > 30: 00 00 00 00 40 00 00 00 00 00 00 00 0b 01 00 00 > 40: 01 50 03 00 00 00 00 00 00 00 00 00 00 00 00 00 > 50: 05 70 80 00 00 00 00 00 00 00 00 00 00 00 00 00 > 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 70: 10 00 02 00 01 87 00 00 10 28 09 00 22 34 03 00 > 80: 40 00 21 10 00 00 00 00 00 00 00 00 00 00 00 00 > 90: 00 00 00 00 1f 00 00 00 00 00 00 00 00 00 00 00 > a0: 02 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 > b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > > Regards, > Flyingbee. > > > On Wed, Jul 4, 2012 at 7:29 PM, Bjorn Helgaas <bhelgaas@google.com> wrote: >> On Wed, Jul 4, 2012 at 12:33 AM, sumit chaudhary >> <flyingbee.linux@gmail.com> wrote: >>> Hi, >>> I have a 64 bit PCIe card that is connected to 64 bit PC running >>> ubuntu (Linux ubuntu 3.0.0-12-generic #20-Ubuntu SMP Fri Oct 7 >>> 14:56:25 UTC 2011 x86_64 x86_64 x86_64 GNU/Linux). Linux enumerate >>> this PCIe card and assign 64 bit addresses to 64 bit BARS. >>> >>> Problem is that higher 4 bytes of these addresses are zero, even if >>> they are 64 bit address >>> they lies in 32 bit range. >>> >>> Is it somehow possible to assign real 64 bit addresses ? >>> >>> This is lspci output on my ubuntu PC. >>> >>> Region 0: Memory at fddff000 (64-bit, non-prefetchable) [size=4K] >>> Region 2: Memory at fd000000 (64-bit, prefetchable) [size=8M] >>> Region 4: Memory at fc800000 (64-bit, prefetchable) [size=8M] >> >> Thanks for this report. 64-bit addresses should work, so there must >> be a problem here. Can you collect the complete dmesg log? That will >> contain more details about exactly what's going on. A dmesg log from >> a more recent kernel, e.g., 3.4, would also be useful, just in case >> this problem has already been fixed. >> >> Bjorn ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: 64 bit address to a pcie card 2012-07-05 15:16 ` Bjorn Helgaas @ 2012-07-06 0:14 ` Yinghai Lu 2012-07-06 3:49 ` Bjorn Helgaas 2012-07-09 5:39 ` sumit chaudhary 1 sibling, 1 reply; 7+ messages in thread From: Yinghai Lu @ 2012-07-06 0:14 UTC (permalink / raw) To: Bjorn Helgaas; +Cc: sumit chaudhary, linux-pci On Thu, Jul 5, 2012 at 8:16 AM, Bjorn Helgaas <bhelgaas@google.com> wrote: > [Added back cc: linux-pci so others can help, too] > > What exactly is the problem? Is there a device that isn't working as expected? > > The device at 07:00.0 does indeed have 64-bit BARs, and they happen to > be assigned addresses below 4GB: > > pci 0000:07:00.0: reg 10: [mem 0xfddff000-0xfddfffff 64bit] > pci 0000:07:00.0: reg 18: [mem 0xbf000000-0xbfffffff 64bit pref] > pci 0000:07:00.0: reg 20: [mem 0x40000000-0x7fffffff 64bit pref] > > This is perfectly normal. The fact that the BAR supports a full > 64-bit address doesn't mean it has to be assigned space above 4GB. > The BIOS assigned these addresses, and Linux found no reason to change > them, so we just left them alone. The system only has 1G ram installed, and the card need 1G 64bit pref. Maybe BIOS could push that above 4G, if the system get 4G RAM installed. Yinghai ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: 64 bit address to a pcie card 2012-07-06 0:14 ` Yinghai Lu @ 2012-07-06 3:49 ` Bjorn Helgaas 0 siblings, 0 replies; 7+ messages in thread From: Bjorn Helgaas @ 2012-07-06 3:49 UTC (permalink / raw) To: Yinghai Lu; +Cc: sumit chaudhary, linux-pci On Thu, Jul 5, 2012 at 6:14 PM, Yinghai Lu <yinghai@kernel.org> wrote: > On Thu, Jul 5, 2012 at 8:16 AM, Bjorn Helgaas <bhelgaas@google.com> wrote: >> [Added back cc: linux-pci so others can help, too] >> >> What exactly is the problem? Is there a device that isn't working as expected? >> >> The device at 07:00.0 does indeed have 64-bit BARs, and they happen to >> be assigned addresses below 4GB: >> >> pci 0000:07:00.0: reg 10: [mem 0xfddff000-0xfddfffff 64bit] >> pci 0000:07:00.0: reg 18: [mem 0xbf000000-0xbfffffff 64bit pref] >> pci 0000:07:00.0: reg 20: [mem 0x40000000-0x7fffffff 64bit pref] >> >> This is perfectly normal. The fact that the BAR supports a full >> 64-bit address doesn't mean it has to be assigned space above 4GB. >> The BIOS assigned these addresses, and Linux found no reason to change >> them, so we just left them alone. > > The system only has 1G ram installed, and the card need 1G 64bit pref. > > Maybe BIOS could push that above 4G, if the system get 4G RAM installed. Maybe. I doubt it, because BIOS didn't report any host bridge apertures above 4GB. But I haven't heard about a problem yet. If there's no problem, there's no problem. ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: 64 bit address to a pcie card 2012-07-05 15:16 ` Bjorn Helgaas 2012-07-06 0:14 ` Yinghai Lu @ 2012-07-09 5:39 ` sumit chaudhary 2012-07-09 8:41 ` Yinghai Lu 1 sibling, 1 reply; 7+ messages in thread From: sumit chaudhary @ 2012-07-09 5:39 UTC (permalink / raw) To: Bjorn Helgaas; +Cc: linux-pci Hi Bjorn, Device is working as expected but problem is that I want to test this device with real 64 bit addresses that lies above 4GB. is there a way to allocate addresses above 4GB range ? If I try to allocate BAR size more than 2GB i.e. to push allocated address above 4GB, I increase resource size asked from OS than host system stopped booting and hangs. I also tried enumerating PCI subsystem using kernel command line option pci_assign = buses, but same problem persist. I also tried Increasing RAM of my system to 4 GB but still address allocation is in 32 bit range. Regards, Flyingbee. On Thu, Jul 5, 2012 at 8:46 PM, Bjorn Helgaas <bhelgaas@google.com> wrote: > [Added back cc: linux-pci so others can help, too] > > What exactly is the problem? Is there a device that isn't working as expected? > > The device at 07:00.0 does indeed have 64-bit BARs, and they happen to > be assigned addresses below 4GB: > > pci 0000:07:00.0: reg 10: [mem 0xfddff000-0xfddfffff 64bit] > pci 0000:07:00.0: reg 18: [mem 0xbf000000-0xbfffffff 64bit pref] > pci 0000:07:00.0: reg 20: [mem 0x40000000-0x7fffffff 64bit pref] > > This is perfectly normal. The fact that the BAR supports a full > 64-bit address doesn't mean it has to be assigned space above 4GB. > The BIOS assigned these addresses, and Linux found no reason to change > them, so we just left them alone. > > On Thu, Jul 5, 2012 at 5:29 AM, sumit chaudhary > <flyingbee.linux@gmail.com> wrote: >> Hi Bjorn, >> >> Thanks for your quick response. >> Here are dmesg logs and lspci output on my ubuntu system(3.0.0). >> Let me know if this information is good enough to point out issue. >> Mean while I will try with recent kernel. >> >> Dmesg logs: >> >> [ 0.000000] Initializing cgroup subsys cpuset >> [ 0.000000] Initializing cgroup subsys cpu >> [ 0.000000] Linux version 3.0.0-12-generic (buildd@crested) (gcc >> version 4.6.1 (Ubuntu/Linaro 4.6.1-9ubuntu3) ) #20-Ubuntu SMP Fri Oct >> 7 14:56:25 UTC 2011 (Ubuntu 3.0.0-12.20-generic 3.0.4) >> [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.0.0-12-generic >> root=UUID=4ffbaf90-4493-453d-ae3e-008a7176bfc5 ro pci=assign-busses >> quiet splash pci=assign-busses vt.handoff=7 >> [ 0.000000] KERNEL supported cpus: >> [ 0.000000] Intel GenuineIntel >> [ 0.000000] AMD AuthenticAMD >> [ 0.000000] Centaur CentaurHauls >> [ 0.000000] BIOS-provided physical RAM map: >> [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) >> [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) >> [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) >> [ 0.000000] BIOS-e820: 0000000000100000 - 000000003fee0000 (usable) >> [ 0.000000] BIOS-e820: 000000003fee0000 - 000000003fee3000 (ACPI NVS) >> [ 0.000000] BIOS-e820: 000000003fee3000 - 000000003fef0000 (ACPI data) >> [ 0.000000] BIOS-e820: 000000003fef0000 - 000000003ff00000 (reserved) >> [ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) >> [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) >> [ 0.000000] NX (Execute Disable) protection: active >> [ 0.000000] DMI 2.3 present. >> [ 0.000000] DMI: System manufacturer System Product Name/M2N32-SLI >> DELUXE, BIOS ASUS M2N32-SLI DELUXE ACPI BIOS Revision 0706 08/21/2006 >> [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 >> (usable) ==> (reserved) >> [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) >> [ 0.000000] No AGP bridge found >> [ 0.000000] last_pfn = 0x3fee0 max_arch_pfn = 0x400000000 >> [ 0.000000] MTRR default type: uncachable >> [ 0.000000] MTRR fixed ranges enabled: >> [ 0.000000] 00000-9FFFF write-back >> [ 0.000000] A0000-BFFFF uncachable >> [ 0.000000] C0000-C7FFF write-protect >> [ 0.000000] C8000-FFFFF uncachable >> [ 0.000000] MTRR variable ranges enabled: >> [ 0.000000] 0 base 0000000000 mask FFC0000000 write-back >> [ 0.000000] 1 base 003FF00000 mask FFFFF00000 uncachable >> [ 0.000000] 2 disabled >> [ 0.000000] 3 disabled >> [ 0.000000] 4 disabled >> [ 0.000000] 5 disabled >> [ 0.000000] 6 disabled >> [ 0.000000] 7 disabled >> [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 >> [ 0.000000] original variable MTRRs >> [ 0.000000] reg 0, base: 0GB, range: 1GB, type WB >> [ 0.000000] reg 1, base: 1023MB, range: 1MB, type UC >> [ 0.000000] total RAM covered: 1023M >> [ 0.000000] Found optimal setting for mtrr clean up >> [ 0.000000] gran_size: 64K chunk_size: 2M num_reg: 2 lose cover RAM: 0G >> [ 0.000000] New variable MTRRs >> [ 0.000000] reg 0, base: 0GB, range: 1GB, type WB >> [ 0.000000] reg 1, base: 1023MB, range: 1MB, type UC >> [ 0.000000] found SMP MP-table at [ffff8800000f5fa0] f5fa0 >> [ 0.000000] initial memory mapped : 0 - 20000000 >> [ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480 >> [ 0.000000] init_memory_mapping: 0000000000000000-000000003fee0000 >> [ 0.000000] 0000000000 - 003fe00000 page 2M >> [ 0.000000] 003fe00000 - 003fee0000 page 4k >> [ 0.000000] kernel direct mapping tables up to 3fee0000 @ 3fedd000-3fee0000 >> [ 0.000000] RAMDISK: 365bc000 - 372d6000 >> [ 0.000000] ACPI: RSDP 00000000000f7c70 00014 (v00 Nvidia) >> [ 0.000000] ACPI: RSDT 000000003fee3040 00030 (v01 Nvidia AWRDACPI >> 42302E31 AWRD 00000000) >> [ 0.000000] ACPI: FACP 000000003fee30c0 00074 (v01 Nvidia AWRDACPI >> 42302E31 AWRD 00000000) >> [ 0.000000] ACPI: DSDT 000000003fee3180 09348 (v01 NVIDIA AWRDACPI >> 00001000 MSFT 0100000E) >> [ 0.000000] ACPI: FACS 000000003fee0000 00040 >> [ 0.000000] ACPI: MCFG 000000003feec600 0003C (v01 Nvidia AWRDACPI >> 42302E31 AWRD 00000000) >> [ 0.000000] ACPI: APIC 000000003feec540 00072 (v01 Nvidia AWRDACPI >> 42302E31 AWRD 00000000) >> [ 0.000000] ACPI: Local APIC address 0xfee00000 >> [ 0.000000] Scanning NUMA topology in Northbridge 24 >> [ 0.000000] No NUMA configuration found >> [ 0.000000] Faking a node at 0000000000000000-000000003fee0000 >> [ 0.000000] Initmem setup node 0 0000000000000000-000000003fee0000 >> [ 0.000000] NODE_DATA [000000003fed8000 - 000000003fedcfff] >> [ 0.000000] [ffffea0000000000-ffffea0000dfffff] PMD -> >> [ffff88003e600000-ffff88003f3fffff] on node 0 >> [ 0.000000] Zone PFN ranges: >> [ 0.000000] DMA 0x00000010 -> 0x00001000 >> [ 0.000000] DMA32 0x00001000 -> 0x00100000 >> [ 0.000000] Normal empty >> [ 0.000000] Movable zone start PFN for each node >> [ 0.000000] early_node_map[2] active PFN ranges >> [ 0.000000] 0: 0x00000010 -> 0x0000009f >> [ 0.000000] 0: 0x00000100 -> 0x0003fee0 >> [ 0.000000] On node 0 totalpages: 261743 >> [ 0.000000] DMA zone: 56 pages used for memmap >> [ 0.000000] DMA zone: 5 pages reserved >> [ 0.000000] DMA zone: 3922 pages, LIFO batch:0 >> [ 0.000000] DMA32 zone: 3525 pages used for memmap >> [ 0.000000] DMA32 zone: 254235 pages, LIFO batch:31 >> [ 0.000000] Nvidia board detected. Ignoring ACPI timer override. >> [ 0.000000] If you got timer trouble try acpi_use_timer_override >> [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 >> [ 0.000000] ACPI: Local APIC address 0xfee00000 >> [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) >> [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled) >> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) >> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) >> [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) >> [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 >> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) >> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) >> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) >> [ 0.000000] ACPI: IRQ9 used by override. >> [ 0.000000] ACPI: IRQ14 used by override. >> [ 0.000000] ACPI: IRQ15 used by override. >> [ 0.000000] Using ACPI (MADT) for SMP configuration information >> [ 0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs >> [ 0.000000] nr_irqs_gsi: 40 >> [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 >> [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 >> [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 >> [ 0.000000] Allocating PCI resources starting at 3ff00000 (gap: >> 3ff00000:b0100000) >> [ 0.000000] Booting paravirtualized kernel on bare hardware >> [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 >> nr_cpu_ids:2 nr_node_ids:1 >> [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88003fc00000 s79616 >> r8192 d22784 u1048576 >> [ 0.000000] pcpu-alloc: s79616 r8192 d22784 u1048576 alloc=1*2097152 >> [ 0.000000] pcpu-alloc: [0] 0 1 >> [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. >> Total pages: 258157 >> [ 0.000000] Policy zone: DMA32 >> [ 0.000000] Kernel command line: >> BOOT_IMAGE=/boot/vmlinuz-3.0.0-12-generic >> root=UUID=4ffbaf90-4493-453d-ae3e-008a7176bfc5 ro pci=assign-busses >> quiet splash pci=assign-busses vt.handoff=7 >> [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) >> [ 0.000000] Checking aperture... >> [ 0.000000] No AGP bridge found >> [ 0.000000] Node 0: aperture @ f1c000000 size 32 MB >> [ 0.000000] Aperture beyond 4GB. Ignoring. >> [ 0.000000] Memory: 1005520k/1047424k available (6104k kernel code, >> 452k absent, 41452k reserved, 4880k data, 984k init) >> [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, >> CPUs=2, Nodes=1 >> [ 0.000000] Hierarchical RCU implementation. >> [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. >> [ 0.000000] NR_IRQS:16640 nr_irqs:512 16 >> [ 0.000000] spurious 8259A interrupt: IRQ7. >> [ 0.000000] vt handoff: transparent VT on vt#7 >> [ 0.000000] Console: colour dummy device 80x25 >> [ 0.000000] console [tty0] enabled >> [ 0.000000] allocated 8388608 bytes of page_cgroup >> [ 0.000000] please try 'cgroup_disable=memory' option if you don't >> want memory cgroups >> [ 0.000000] Fast TSC calibration using PIT >> [ 0.000000] Detected 2009.142 MHz processor. >> [ 0.000000] Marking TSC unstable due to TSCs unsynchronized >> [ 0.008007] Calibrating delay loop (skipped), value calculated >> using timer frequency.. 4018.28 BogoMIPS (lpj=8036568) >> [ 0.008012] pid_max: default: 32768 minimum: 301 >> [ 0.008049] Security Framework initialized >> [ 0.008074] AppArmor: AppArmor initialized >> [ 0.008075] Yama: becoming mindful. >> [ 0.008268] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) >> [ 0.012494] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) >> [ 0.012882] Mount-cache hash table entries: 256 >> [ 0.013068] Initializing cgroup subsys cpuacct >> [ 0.013075] Initializing cgroup subsys memory >> [ 0.013086] Initializing cgroup subsys devices >> [ 0.013089] Initializing cgroup subsys freezer >> [ 0.013091] Initializing cgroup subsys net_cls >> [ 0.013094] Initializing cgroup subsys blkio >> [ 0.013102] Initializing cgroup subsys perf_event >> [ 0.013141] tseg: 003ff00000 >> [ 0.013144] mce: CPU supports 5 MCE banks >> [ 0.013159] using AMD E400 aware idle routine >> [ 0.013197] SMP alternatives: switching to UP code >> [ 0.021136] ACPI: Core revision 20110413 >> [ 0.028014] ftrace: allocating 25651 entries in 101 pages >> [ 0.032637] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1 >> [ 0.073689] CPU0: AMD Athlon(tm) 64 Processor 3200+ stepping 02 >> [ 0.076004] Performance Events: AMD PMU driver. >> [ 0.076004] ... version: 0 >> [ 0.076004] ... bit width: 48 >> [ 0.076004] ... generic registers: 4 >> [ 0.076004] ... value mask: 0000ffffffffffff >> [ 0.076004] ... max period: 00007fffffffffff >> [ 0.076004] ... fixed-purpose events: 0 >> [ 0.076004] ... event mask: 000000000000000f >> [ 0.076004] Brought up 1 CPUs >> [ 0.076004] Total of 1 processors activated (4018.28 BogoMIPS). >> [ 0.076004] devtmpfs: initialized >> [ 0.076004] PM: Registering ACPI NVS region at 3fee0000 (12288 bytes) >> [ 0.076004] print_constraints: dummy: >> [ 0.076004] Time: 10:15:27 Date: 07/05/12 >> [ 0.076004] NET: Registered protocol family 16 >> [ 0.076004] node 0 link 0: io port [8000, ffff] >> [ 0.076004] TOM: 0000000040000000 aka 1024M >> [ 0.076004] node 0 link 0: mmio [a0000, bffff] >> [ 0.076004] node 0 link 0: mmio [40000000, efffffff] >> [ 0.076004] node 0 link 0: mmio [f4000000, fe02ffff] >> [ 0.076004] node 0 link 0: mmio [f0000000, f07fffff] >> [ 0.076004] bus: [00, 07] on node 0 link 0 >> [ 0.076004] bus: 00 index 0 [io 0x0000-0xffff] >> [ 0.076004] bus: 00 index 1 [mem 0x000a0000-0x000bffff] >> [ 0.076004] bus: 00 index 2 [mem 0x40000000-0xf3ffffff] >> [ 0.076004] bus: 00 index 3 [mem 0xf4000000-0xfcffffffff] >> [ 0.076004] ACPI: bus type pci registered >> [ 0.076004] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem >> 0xf0000000-0xf3ffffff] (base 0xf0000000) >> [ 0.076004] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820 >> [ 0.080216] PCI: Using configuration type 1 for base access >> [ 0.081104] bio: create slab <bio-0> at 0 >> [ 0.083134] ACPI: EC: Look up EC in DSDT >> [ 0.091179] ACPI: Interpreter enabled >> [ 0.091185] ACPI: (supports S0 S1 S3 S4 S5) >> [ 0.091211] ACPI: Using IOAPIC for interrupt routing >> [ 0.099460] ACPI: No dock devices found. >> [ 0.099465] HEST: Table not found. >> [ 0.099470] PCI: Ignoring host bridge windows from ACPI; if >> necessary, use "pci=use_crs" and report a bug >> [ 0.100096] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-07]) >> [ 0.101293] pci_root PNP0A08:00: host bridge window [io >> 0x0000-0x03af] (ignored) >> [ 0.101297] pci_root PNP0A08:00: host bridge window [io >> 0x03e0-0x0cf7] (ignored) >> [ 0.101300] pci_root PNP0A08:00: host bridge window [io >> 0x1c00-0x1c7f] (ignored) >> [ 0.101303] pci_root PNP0A08:00: host bridge window [io >> 0x8000-0xffff] (ignored) >> [ 0.101306] pci_root PNP0A08:00: host bridge window [io >> 0x03b0-0x03df] (ignored) >> [ 0.101309] pci_root PNP0A08:00: host bridge window [mem >> 0x000a0000-0x000bffff] (ignored) >> [ 0.101312] pci_root PNP0A08:00: host bridge window [mem >> 0x40000000-0xefffffff] (ignored) >> [ 0.101315] pci_root PNP0A08:00: host bridge window [mem >> 0xf4000000-0xfe02ffff] (ignored) >> [ 0.101318] pci_root PNP0A08:00: host bridge window [mem >> 0xfec80000-0xfecbffff] (ignored) >> [ 0.101331] pci 0000:00:00.0: [10de:02f4] type 0 class 0x000500 >> [ 0.101378] pci 0000:00:00.1: [10de:02fa] type 0 class 0x000500 >> [ 0.101408] pci 0000:00:00.2: [10de:02fe] type 0 class 0x000500 >> [ 0.101447] pci 0000:00:00.3: [10de:02f8] type 0 class 0x000500 >> [ 0.101484] pci 0000:00:00.4: [10de:02f9] type 0 class 0x000500 >> [ 0.101523] pci 0000:00:00.5: [10de:02ff] type 0 class 0x000500 >> [ 0.101557] pci 0000:00:00.6: [10de:027f] type 0 class 0x000500 >> [ 0.101590] pci 0000:00:00.7: [10de:027e] type 0 class 0x000500 >> [ 0.101633] pci 0000:00:03.0: [10de:02fd] type 1 class 0x000604 >> [ 0.101658] pci 0000:00:03.0: PME# supported from D0 D1 D2 D3hot D3cold >> [ 0.101661] pci 0000:00:03.0: PME# disabled >> [ 0.101677] pci 0000:00:04.0: [10de:02fb] type 1 class 0x000604 >> [ 0.101699] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold >> [ 0.101702] pci 0000:00:04.0: PME# disabled >> [ 0.101734] pci 0000:00:08.0: [10de:0369] type 0 class 0x000500 >> [ 0.101904] pci 0000:00:09.0: [10de:0360] type 0 class 0x000601 >> [ 0.101939] HPET not enabled in BIOS. You might try hpet=force boot option >> [ 0.101957] pci 0000:00:09.1: [10de:0368] type 0 class 0x000c05 >> [ 0.101973] pci 0000:00:09.1: reg 10: [io 0xfc00-0xfc3f] >> [ 0.101996] pci 0000:00:09.1: reg 20: [io 0x1c00-0x1c3f] >> [ 0.102003] pci 0000:00:09.1: reg 24: [io 0x1c40-0x1c7f] >> [ 0.102029] pci 0000:00:09.1: PME# supported from D3hot D3cold >> [ 0.102035] pci 0000:00:09.1: PME# disabled >> [ 0.102050] pci 0000:00:09.2: [10de:036a] type 0 class 0x000500 >> [ 0.102109] pci 0000:00:0a.0: [10de:036c] type 0 class 0x000c03 >> [ 0.102121] pci 0000:00:0a.0: reg 10: [mem 0xfe02f000-0xfe02ffff] >> [ 0.102159] pci 0000:00:0a.0: supports D1 D2 >> [ 0.102162] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold >> [ 0.102166] pci 0000:00:0a.0: PME# disabled >> [ 0.102183] pci 0000:00:0a.1: [10de:036d] type 0 class 0x000c03 >> [ 0.102195] pci 0000:00:0a.1: reg 10: [mem 0xfe02e000-0xfe02e0ff] >> [ 0.102234] pci 0000:00:0a.1: supports D1 D2 >> [ 0.102236] pci 0000:00:0a.1: PME# supported from D0 D1 D2 D3hot D3cold >> [ 0.102240] pci 0000:00:0a.1: PME# disabled >> [ 0.102262] pci 0000:00:0c.0: [10de:036e] type 0 class 0x000101 >> [ 0.102287] pci 0000:00:0c.0: reg 20: [io 0xf000-0xf00f] >> [ 0.102320] pci 0000:00:0d.0: [10de:037f] type 0 class 0x000101 >> [ 0.102333] pci 0000:00:0d.0: reg 10: [io 0x09f0-0x09f7] >> [ 0.102339] pci 0000:00:0d.0: reg 14: [io 0x0bf0-0x0bf3] >> [ 0.102345] pci 0000:00:0d.0: reg 18: [io 0x0970-0x0977] >> [ 0.102352] pci 0000:00:0d.0: reg 1c: [io 0x0b70-0x0b73] >> [ 0.102358] pci 0000:00:0d.0: reg 20: [io 0xdc00-0xdc0f] >> [ 0.102365] pci 0000:00:0d.0: reg 24: [mem 0xfe02d000-0xfe02dfff] >> [ 0.102401] pci 0000:00:0d.1: [10de:037f] type 0 class 0x000101 >> [ 0.102414] pci 0000:00:0d.1: reg 10: [io 0x09e0-0x09e7] >> [ 0.102420] pci 0000:00:0d.1: reg 14: [io 0x0be0-0x0be3] >> [ 0.102427] pci 0000:00:0d.1: reg 18: [io 0x0960-0x0967] >> [ 0.102433] pci 0000:00:0d.1: reg 1c: [io 0x0b60-0x0b63] >> [ 0.102440] pci 0000:00:0d.1: reg 20: [io 0xc800-0xc80f] >> [ 0.102446] pci 0000:00:0d.1: reg 24: [mem 0xfe02c000-0xfe02cfff] >> [ 0.102482] pci 0000:00:0d.2: [10de:037f] type 0 class 0x000101 >> [ 0.102495] pci 0000:00:0d.2: reg 10: [io 0xc400-0xc407] >> [ 0.102501] pci 0000:00:0d.2: reg 14: [io 0xc000-0xc003] >> [ 0.102508] pci 0000:00:0d.2: reg 18: [io 0xbc00-0xbc07] >> [ 0.102514] pci 0000:00:0d.2: reg 1c: [io 0xb800-0xb803] >> [ 0.102521] pci 0000:00:0d.2: reg 20: [io 0xb400-0xb40f] >> [ 0.102527] pci 0000:00:0d.2: reg 24: [mem 0xfe02b000-0xfe02bfff] >> [ 0.102567] pci 0000:00:0e.0: [10de:0370] type 1 class 0x000604 >> [ 0.102611] pci 0000:00:0e.1: [10de:0371] type 0 class 0x000403 >> [ 0.102625] pci 0000:00:0e.1: reg 10: [mem 0xfe020000-0xfe023fff] >> [ 0.102668] pci 0000:00:0e.1: PME# supported from D3hot D3cold >> [ 0.102672] pci 0000:00:0e.1: PME# disabled >> [ 0.102701] pci 0000:00:10.0: [10de:0373] type 0 class 0x000680 >> [ 0.102717] pci 0000:00:10.0: reg 10: [mem 0xfe02a000-0xfe02afff] >> [ 0.102724] pci 0000:00:10.0: reg 14: [io 0xb000-0xb007] >> [ 0.102730] pci 0000:00:10.0: reg 18: [mem 0xfe029000-0xfe0290ff] >> [ 0.102737] pci 0000:00:10.0: reg 1c: [mem 0xfe028000-0xfe02800f] >> [ 0.102771] pci 0000:00:10.0: supports D1 D2 >> [ 0.102773] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold >> [ 0.102778] pci 0000:00:10.0: PME# disabled >> [ 0.102803] pci 0000:00:11.0: [10de:0373] type 0 class 0x000680 >> [ 0.102818] pci 0000:00:11.0: reg 10: [mem 0xfe027000-0xfe027fff] >> [ 0.102825] pci 0000:00:11.0: reg 14: [io 0xac00-0xac07] >> [ 0.102831] pci 0000:00:11.0: reg 18: [mem 0xfe026000-0xfe0260ff] >> [ 0.102838] pci 0000:00:11.0: reg 1c: [mem 0xfe025000-0xfe02500f] >> [ 0.102872] pci 0000:00:11.0: supports D1 D2 >> [ 0.102874] pci 0000:00:11.0: PME# supported from D0 D1 D2 D3hot D3cold >> [ 0.102879] pci 0000:00:11.0: PME# disabled >> [ 0.102900] pci 0000:00:12.0: [10de:0376] type 1 class 0x000604 >> [ 0.102934] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold >> [ 0.102937] pci 0000:00:12.0: PME# disabled >> [ 0.102959] pci 0000:00:14.0: [10de:0374] type 1 class 0x000604 >> [ 0.102992] pci 0000:00:14.0: PME# supported from D0 D1 D2 D3hot D3cold >> [ 0.102996] pci 0000:00:14.0: PME# disabled >> [ 0.103017] pci 0000:00:16.0: [10de:0375] type 1 class 0x000604 >> [ 0.103051] pci 0000:00:16.0: PME# supported from D0 D1 D2 D3hot D3cold >> [ 0.103054] pci 0000:00:16.0: PME# disabled >> [ 0.103075] pci 0000:00:17.0: [10de:0377] type 1 class 0x000604 >> [ 0.103108] pci 0000:00:17.0: PME# supported from D0 D1 D2 D3hot D3cold >> [ 0.103111] pci 0000:00:17.0: PME# disabled >> [ 0.103126] pci 0000:00:18.0: [1022:1100] type 0 class 0x000600 >> [ 0.103146] pci 0000:00:18.1: [1022:1101] type 0 class 0x000600 >> [ 0.103164] pci 0000:00:18.2: [1022:1102] type 0 class 0x000600 >> [ 0.103183] pci 0000:00:18.3: [1022:1103] type 0 class 0x000600 >> [ 0.103211] PCI: peer root bus 00 res updated from pci conf >> [ 0.103255] pci 0000:00:03.0: PCI bridge to [bus 01-ff] >> [ 0.103259] pci 0000:00:03.0: bridge window [io 0xf000-0x0000] (disabled) >> [ 0.103263] pci 0000:00:03.0: bridge window [mem >> 0xfff00000-0x000fffff] (disabled) >> [ 0.103267] pci 0000:00:03.0: bridge window [mem >> 0xfff00000-0x000fffff pref] (disabled) >> [ 0.103300] pci 0000:02:00.0: [10de:0161] type 0 class 0x000300 >> [ 0.103308] pci 0000:02:00.0: reg 10: [mem 0xfa000000-0xfaffffff] >> [ 0.103318] pci 0000:02:00.0: reg 14: [mem 0xe0000000-0xefffffff 64bit pref] >> [ 0.103327] pci 0000:02:00.0: reg 1c: [mem 0xfb000000-0xfbffffff 64bit] >> [ 0.103337] pci 0000:02:00.0: reg 30: [mem 0xfcfe0000-0xfcffffff pref] >> [ 0.103360] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe >> device. You can enable it with 'pcie_aspm=force' >> [ 0.103368] pci 0000:00:04.0: PCI bridge to [bus 02-ff] >> [ 0.103372] pci 0000:00:04.0: bridge window [io 0xf000-0x0000] (disabled) >> [ 0.103375] pci 0000:00:04.0: bridge window [mem 0xfa000000-0xfcffffff] >> [ 0.103380] pci 0000:00:04.0: bridge window [mem >> 0xe0000000-0xefffffff 64bit pref] >> [ 0.103416] pci 0000:03:07.0: [10ec:8139] type 0 class 0x000200 >> [ 0.103430] pci 0000:03:07.0: reg 10: [io 0x9c00-0x9cff] >> [ 0.103439] pci 0000:03:07.0: reg 14: [mem 0xfdfff000-0xfdfff0ff] >> [ 0.103471] pci 0000:03:07.0: reg 30: [mem 0xfdfe0000-0xfdfeffff pref] >> [ 0.103486] pci 0000:03:07.0: supports D1 D2 >> [ 0.103489] pci 0000:03:07.0: PME# supported from D1 D2 D3hot D3cold >> [ 0.103493] pci 0000:03:07.0: PME# disabled >> [ 0.103512] pci 0000:03:0b.0: [104c:8023] type 0 class 0x000c00 >> [ 0.103526] pci 0000:03:0b.0: reg 10: [mem 0xfdffe000-0xfdffe7ff] >> [ 0.103535] pci 0000:03:0b.0: reg 14: [mem 0xfdff8000-0xfdffbfff] >> [ 0.103581] pci 0000:03:0b.0: supports D1 D2 >> [ 0.103583] pci 0000:03:0b.0: PME# supported from D0 D1 D2 D3hot >> [ 0.103588] pci 0000:03:0b.0: PME# disabled >> [ 0.103613] pci 0000:00:0e.0: PCI bridge to [bus 03-ff] (subtractive decode) >> [ 0.103617] pci 0000:00:0e.0: bridge window [io 0x9000-0x9fff] >> [ 0.103621] pci 0000:00:0e.0: bridge window [mem 0xfdf00000-0xfdffffff] >> [ 0.103625] pci 0000:00:0e.0: bridge window [mem >> 0xfff00000-0x000fffff pref] (disabled) >> [ 0.103628] pci 0000:00:0e.0: bridge window [io 0x0000-0xffff] >> (subtractive decode) >> [ 0.103631] pci 0000:00:0e.0: bridge window [mem >> 0x000a0000-0x000bffff] (subtractive decode) >> [ 0.103634] pci 0000:00:0e.0: bridge window [mem >> 0x40000000-0xf3ffffff] (subtractive decode) >> [ 0.103637] pci 0000:00:0e.0: bridge window [mem >> 0xf4000000-0xfcffffffff] (subtractive decode) >> [ 0.103672] pci 0000:00:12.0: PCI bridge to [bus 04-ff] >> [ 0.103677] pci 0000:00:12.0: bridge window [io 0xf000-0x0000] (disabled) >> [ 0.103680] pci 0000:00:12.0: bridge window [mem >> 0xfff00000-0x000fffff] (disabled) >> [ 0.103685] pci 0000:00:12.0: bridge window [mem >> 0xfff00000-0x000fffff pref] (disabled) >> [ 0.103720] pci 0000:00:14.0: PCI bridge to [bus 05-ff] >> [ 0.103725] pci 0000:00:14.0: bridge window [io 0xf000-0x0000] (disabled) >> [ 0.103728] pci 0000:00:14.0: bridge window [mem >> 0xfff00000-0x000fffff] (disabled) >> [ 0.103733] pci 0000:00:14.0: bridge window [mem >> 0xfff00000-0x000fffff pref] (disabled) >> [ 0.103786] pci 0000:06:00.0: [1095:3132] type 0 class 0x000180 >> [ 0.103809] pci 0000:06:00.0: reg 10: [mem 0xfdeff000-0xfdeff07f 64bit] >> [ 0.103827] pci 0000:06:00.0: reg 18: [mem 0xfdef8000-0xfdefbfff 64bit] >> [ 0.103840] pci 0000:06:00.0: reg 20: [io 0x8c00-0x8c7f] >> [ 0.103862] pci 0000:06:00.0: reg 30: [mem 0xfde00000-0xfde7ffff pref] >> [ 0.103896] pci 0000:06:00.0: supports D1 D2 >> [ 0.103914] pci 0000:06:00.0: disabling ASPM on pre-1.1 PCIe >> device. You can enable it with 'pcie_aspm=force' >> [ 0.103926] pci 0000:00:16.0: PCI bridge to [bus 06-ff] >> [ 0.103930] pci 0000:00:16.0: bridge window [io 0x8000-0x8fff] >> [ 0.103934] pci 0000:00:16.0: bridge window [mem 0xfde00000-0xfdefffff] >> [ 0.103939] pci 0000:00:16.0: bridge window [mem >> 0xfff00000-0x000fffff pref] (disabled) >> [ 0.103986] pci 0000:07:00.0: [104c:b800] type 0 class 0x000400 >> [ 0.104014] pci 0000:07:00.0: reg 10: [mem 0xfddff000-0xfddfffff 64bit] >> [ 0.104028] pci 0000:07:00.0: reg 18: [mem 0xbf000000-0xbfffffff 64bit pref] >> [ 0.104041] pci 0000:07:00.0: reg 20: [mem 0x40000000-0x7fffffff 64bit pref] >> [ 0.112023] pci 0000:00:17.0: PCI bridge to [bus 07-ff] >> [ 0.112028] pci 0000:00:17.0: bridge window [io 0xf000-0x0000] (disabled) >> [ 0.112032] pci 0000:00:17.0: bridge window [mem 0xfdd00000-0xfddfffff] >> [ 0.112037] pci 0000:00:17.0: bridge window [mem >> 0x40000000-0xbfffffff 64bit pref] >> [ 0.112044] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] >> [ 0.112317] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] >> [ 0.112519] pci0000:00: Requesting ACPI _OSC control (0x1d) >> [ 0.112524] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), >> returned control mask: 0x1d >> [ 0.112526] ACPI _OSC control for PCIe not granted, disabling ASPM >> [ 0.186782] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 *10 11 14 15) >> [ 0.186841] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 *10 11 14 15) >> [ 0.186895] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 >> 15) *0, disabled. >> [ 0.186949] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 >> 15) *0, disabled. >> [ 0.187005] ACPI: PCI Interrupt Link [LNK5] (IRQs *5 7 9 10 11 14 15) >> [ 0.187060] ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 *11 14 15) >> [ 0.187115] ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 *11 14 15) >> [ 0.187174] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 >> 15) *0, disabled. >> [ 0.187229] ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 >> 15) *0, disabled. >> [ 0.187286] ACPI: PCI Interrupt Link [LUBA] (IRQs 5 *7 9 10 11 14 15) >> [ 0.187345] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 10 *11 14 15) >> [ 0.187409] ACPI: PCI Interrupt Link [LMC1] (IRQs *5 7 9 10 11 14 15) >> [ 0.187464] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 *10 11 14 15) >> [ 0.187519] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 >> 15) *0, disabled. >> [ 0.187575] ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 *10 11 14 15) >> [ 0.187636] ACPI: PCI Interrupt Link [LUB2] (IRQs *5 7 9 10 11 14 15) >> [ 0.187691] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 >> 15) *0, disabled. >> [ 0.187747] ACPI: PCI Interrupt Link [LSID] (IRQs *5 7 9 10 11 14 15) >> [ 0.187802] ACPI: PCI Interrupt Link [LFID] (IRQs *5 7 9 10 11 14 15) >> [ 0.187858] ACPI: PCI Interrupt Link [LSA2] (IRQs *5 7 9 10 11 14 15) >> [ 0.187955] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0 >> [ 0.188048] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0 >> [ 0.188131] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled. >> [ 0.188213] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled. >> [ 0.188296] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0 >> [ 0.188379] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0 >> [ 0.188461] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0 >> [ 0.188543] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled. >> [ 0.188627] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0 >> [ 0.188711] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0 >> [ 0.188795] ACPI: PCI Interrupt Link [AMC1] (IRQs 20 21 22 23) *0 >> [ 0.188880] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled. >> [ 0.188965] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0 >> [ 0.189050] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0 >> [ 0.189135] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0 >> [ 0.189223] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled. >> [ 0.189313] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled. >> [ 0.189398] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0 >> [ 0.189483] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0 >> [ 0.189567] ACPI: PCI Interrupt Link [ASA2] (IRQs 20 21 22 23) *0 >> [ 0.189712] vgaarb: device added: >> PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none >> [ 0.189717] vgaarb: loaded >> [ 0.189718] vgaarb: bridge control possible 0000:02:00.0 >> [ 0.189943] SCSI subsystem initialized >> [ 0.190030] libata version 3.00 loaded. >> [ 0.190085] usbcore: registered new interface driver usbfs >> [ 0.190096] usbcore: registered new interface driver hub >> [ 0.190125] usbcore: registered new device driver usb >> [ 0.190225] PCI: Using ACPI for IRQ routing >> [ 0.191684] PCI: pci_cache_line_size set to 64 bytes >> [ 0.191786] reserve RAM buffer: 000000000009f800 - 000000000009ffff >> [ 0.191789] reserve RAM buffer: 000000003fee0000 - 000000003fffffff >> [ 0.191909] NetLabel: Initializing >> [ 0.191911] NetLabel: domain hash size = 128 >> [ 0.191913] NetLabel: protocols = UNLABELED CIPSOv4 >> [ 0.191927] NetLabel: unlabeled traffic allowed by default >> [ 0.200075] AppArmor: AppArmor Filesystem Enabled >> [ 0.200122] pnp: PnP ACPI init >> [ 0.200142] ACPI: bus type pnp registered >> [ 0.200844] pnp 00:00: [bus 00-07] >> [ 0.200847] pnp 00:00: [io 0x0cf8-0x0cff] >> [ 0.200850] pnp 00:00: [io 0x0000-0x03af window] >> [ 0.200857] pnp 00:00: [io 0x03e0-0x0cf7 window] >> [ 0.200859] pnp 00:00: [io 0x1c00-0x1c7f window] >> [ 0.200862] pnp 00:00: [io 0x8000-0xffff window] >> [ 0.200865] pnp 00:00: [io 0x03b0-0x03df window] >> [ 0.200867] pnp 00:00: [mem 0x000a0000-0x000bffff window] >> [ 0.200870] pnp 00:00: [mem 0x40000000-0xefffffff window] >> [ 0.200873] pnp 00:00: [mem 0xf4000000-0xfe02ffff window] >> [ 0.200876] pnp 00:00: [mem 0xfec80000-0xfecbffff window] >> [ 0.200970] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 >> PNP0a03 (active) >> [ 0.200994] pnp 00:01: [io 0x1000-0x107f] >> [ 0.200997] pnp 00:01: [io 0x1080-0x10ff] >> [ 0.200999] pnp 00:01: [io 0x1400-0x147f] >> [ 0.201002] pnp 00:01: [io 0x1480-0x14ff] >> [ 0.201004] pnp 00:01: [io 0x1800-0x187f] >> [ 0.201006] pnp 00:01: [io 0x1880-0x18ff] >> [ 0.201088] system 00:01: [io 0x1000-0x107f] has been reserved >> [ 0.201091] system 00:01: [io 0x1080-0x10ff] has been reserved >> [ 0.201094] system 00:01: [io 0x1400-0x147f] has been reserved >> [ 0.201097] system 00:01: [io 0x1480-0x14ff] has been reserved >> [ 0.201101] system 00:01: [io 0x1800-0x187f] has been reserved >> [ 0.201104] system 00:01: [io 0x1880-0x18ff] has been reserved >> [ 0.201108] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) >> [ 0.202001] pnp 00:02: [io 0x0010-0x001f] >> [ 0.202004] pnp 00:02: [io 0x0022-0x003f] >> [ 0.202006] pnp 00:02: [io 0x0044-0x005f] >> [ 0.202008] pnp 00:02: [io 0x0062-0x0063] >> [ 0.202011] pnp 00:02: [io 0x0065-0x006f] >> [ 0.202013] pnp 00:02: [io 0x0074-0x007f] >> [ 0.202015] pnp 00:02: [io 0x0091-0x0093] >> [ 0.202018] pnp 00:02: [io 0x00a2-0x00bf] >> [ 0.202020] pnp 00:02: [io 0x00e0-0x00ef] >> [ 0.202022] pnp 00:02: [io 0x04d0-0x04d1] >> [ 0.202025] pnp 00:02: [io 0x0800-0x087f] >> [ 0.202027] pnp 00:02: [io 0x0290-0x0297] >> [ 0.202121] system 00:02: [io 0x04d0-0x04d1] has been reserved >> [ 0.202127] system 00:02: [io 0x0800-0x087f] has been reserved >> [ 0.202130] system 00:02: [io 0x0290-0x0297] has been reserved >> [ 0.202134] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) >> [ 0.202149] pnp 00:03: [dma 4] >> [ 0.202151] pnp 00:03: [io 0x0000-0x000f] >> [ 0.202154] pnp 00:03: [io 0x0080-0x0090] >> [ 0.202156] pnp 00:03: [io 0x0094-0x009f] >> [ 0.202158] pnp 00:03: [io 0x00c0-0x00df] >> [ 0.202212] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active) >> [ 0.202225] pnp 00:04: [io 0x0070-0x0073] >> [ 0.202243] pnp 00:04: [irq 8] >> [ 0.202297] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active) >> [ 0.202308] pnp 00:05: [io 0x0061] >> [ 0.202365] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active) >> [ 0.202376] pnp 00:06: [io 0x00f0-0x00ff] >> [ 0.202385] pnp 00:06: [irq 13] >> [ 0.202440] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active) >> [ 0.202629] pnp 00:07: [io 0x03f0-0x03f5] >> [ 0.202632] pnp 00:07: [io 0x03f7] >> [ 0.202641] pnp 00:07: [irq 6] >> [ 0.202643] pnp 00:07: [dma 2] >> [ 0.202709] pnp 00:07: Plug and Play ACPI device, IDs PNP0700 (active) >> [ 0.202970] pnp 00:08: [io 0x03f8-0x03ff] >> [ 0.202979] pnp 00:08: [irq 4] >> [ 0.203065] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active) >> [ 0.203461] pnp 00:09: [io 0x0378-0x037f] >> [ 0.203471] pnp 00:09: [irq 7] >> [ 0.203547] pnp 00:09: Plug and Play ACPI device, IDs PNP0400 (active) >> [ 0.203688] pnp 00:0a: [io 0x0060] >> [ 0.203691] pnp 00:0a: [io 0x0064] >> [ 0.203699] pnp 00:0a: [irq 1] >> [ 0.203762] pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 >> PNP030b (active) >> [ 0.203800] pnp 00:0b: [mem 0x00000000-0xffffffffffffffff disabled] >> [ 0.203884] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active) >> [ 0.204052] pnp 00:0c: [mem 0x000cec00-0x000cffff] >> [ 0.204055] pnp 00:0c: [mem 0x000f0000-0x000f7fff] >> [ 0.204057] pnp 00:0c: [mem 0x000f8000-0x000fbfff] >> [ 0.204060] pnp 00:0c: [mem 0x000fc000-0x000fffff] >> [ 0.204062] pnp 00:0c: [mem 0x3fee0000-0x3fefffff] >> [ 0.204065] pnp 00:0c: [mem 0xffff0000-0xffffffff] >> [ 0.204067] pnp 00:0c: [mem 0x00000000-0x0009ffff] >> [ 0.204069] pnp 00:0c: [mem 0x00100000-0x3fedffff] >> [ 0.204072] pnp 00:0c: [mem 0xfec00000-0xfec00fff] >> [ 0.204074] pnp 00:0c: [mem 0xfee00000-0xfeefffff] >> [ 0.204077] pnp 00:0c: [mem 0xfefff000-0xfeffffff] >> [ 0.204079] pnp 00:0c: [mem 0xfff80000-0xfff80fff] >> [ 0.204082] pnp 00:0c: [mem 0xfff90000-0xfffbffff] >> [ 0.204084] pnp 00:0c: [mem 0xfffed000-0xfffeffff] >> [ 0.204190] system 00:0c: [mem 0x000cec00-0x000cffff] has been reserved >> [ 0.204194] system 00:0c: [mem 0x000f0000-0x000f7fff] could not be reserved >> [ 0.204197] system 00:0c: [mem 0x000f8000-0x000fbfff] could not be reserved >> [ 0.204201] system 00:0c: [mem 0x000fc000-0x000fffff] could not be reserved >> [ 0.204204] system 00:0c: [mem 0x3fee0000-0x3fefffff] could not be reserved >> [ 0.204208] system 00:0c: [mem 0xffff0000-0xffffffff] has been reserved >> [ 0.204212] system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved >> [ 0.204215] system 00:0c: [mem 0x00100000-0x3fedffff] could not be reserved >> [ 0.204219] system 00:0c: [mem 0xfec00000-0xfec00fff] could not be reserved >> [ 0.204222] system 00:0c: [mem 0xfee00000-0xfeefffff] has been reserved >> [ 0.204226] system 00:0c: [mem 0xfefff000-0xfeffffff] has been reserved >> [ 0.204229] system 00:0c: [mem 0xfff80000-0xfff80fff] has been reserved >> [ 0.204232] system 00:0c: [mem 0xfff90000-0xfffbffff] has been reserved >> [ 0.204236] system 00:0c: [mem 0xfffed000-0xfffeffff] has been reserved >> [ 0.204239] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active) >> [ 0.204268] pnp: PnP ACPI: found 13 devices >> [ 0.204270] ACPI: ACPI bus type pnp unregistered >> [ 0.210548] Switching to clocksource acpi_pm >> [ 0.210594] PCI: max bus depth: 1 pci_try_num: 2 >> [ 0.210640] pci 0000:00:03.0: PCI bridge to [bus 01-01] >> [ 0.210643] pci 0000:00:03.0: bridge window [io disabled] >> [ 0.210646] pci 0000:00:03.0: bridge window [mem disabled] >> [ 0.210649] pci 0000:00:03.0: bridge window [mem pref disabled] >> [ 0.210653] pci 0000:00:04.0: PCI bridge to [bus 02-02] >> [ 0.210655] pci 0000:00:04.0: bridge window [io disabled] >> [ 0.210659] pci 0000:00:04.0: bridge window [mem 0xfa000000-0xfcffffff] >> [ 0.210663] pci 0000:00:04.0: bridge window [mem >> 0xe0000000-0xefffffff 64bit pref] >> [ 0.210668] pci 0000:00:0e.0: PCI bridge to [bus 03-03] >> [ 0.210671] pci 0000:00:0e.0: bridge window [io 0x9000-0x9fff] >> [ 0.210675] pci 0000:00:0e.0: bridge window [mem 0xfdf00000-0xfdffffff] >> [ 0.210678] pci 0000:00:0e.0: bridge window [mem pref disabled] >> [ 0.210682] pci 0000:00:12.0: PCI bridge to [bus 04-04] >> [ 0.210685] pci 0000:00:12.0: bridge window [io disabled] >> [ 0.210688] pci 0000:00:12.0: bridge window [mem disabled] >> [ 0.210691] pci 0000:00:12.0: bridge window [mem pref disabled] >> [ 0.210696] pci 0000:00:14.0: PCI bridge to [bus 05-05] >> [ 0.210698] pci 0000:00:14.0: bridge window [io disabled] >> [ 0.210702] pci 0000:00:14.0: bridge window [mem disabled] >> [ 0.210705] pci 0000:00:14.0: bridge window [mem pref disabled] >> [ 0.210710] pci 0000:00:16.0: PCI bridge to [bus 06-06] >> [ 0.210713] pci 0000:00:16.0: bridge window [io 0x8000-0x8fff] >> [ 0.210717] pci 0000:00:16.0: bridge window [mem 0xfde00000-0xfdefffff] >> [ 0.210720] pci 0000:00:16.0: bridge window [mem pref disabled] >> [ 0.210725] pci 0000:00:17.0: PCI bridge to [bus 07-07] >> [ 0.210727] pci 0000:00:17.0: bridge window [io disabled] >> [ 0.210731] pci 0000:00:17.0: bridge window [mem 0xfdd00000-0xfddfffff] >> [ 0.210735] pci 0000:00:17.0: bridge window [mem >> 0x40000000-0xbfffffff 64bit pref] >> [ 0.210748] pci 0000:00:03.0: setting latency timer to 64 >> [ 0.210753] pci 0000:00:04.0: setting latency timer to 64 >> [ 0.210758] pci 0000:00:0e.0: setting latency timer to 64 >> [ 0.210765] pci 0000:00:12.0: setting latency timer to 64 >> [ 0.210771] pci 0000:00:14.0: setting latency timer to 64 >> [ 0.210777] pci 0000:00:16.0: setting latency timer to 64 >> [ 0.210783] pci 0000:00:17.0: setting latency timer to 64 >> [ 0.210787] pci_bus 0000:00: resource 4 [io 0x0000-0xffff] >> [ 0.210790] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff] >> [ 0.210793] pci_bus 0000:00: resource 6 [mem 0x40000000-0xf3ffffff] >> [ 0.210796] pci_bus 0000:00: resource 7 [mem 0xf4000000-0xfcffffffff] >> [ 0.210799] pci_bus 0000:02: resource 1 [mem 0xfa000000-0xfcffffff] >> [ 0.210802] pci_bus 0000:02: resource 2 [mem 0xe0000000-0xefffffff >> 64bit pref] >> [ 0.210805] pci_bus 0000:03: resource 0 [io 0x9000-0x9fff] >> [ 0.210808] pci_bus 0000:03: resource 1 [mem 0xfdf00000-0xfdffffff] >> [ 0.210811] pci_bus 0000:03: resource 4 [io 0x0000-0xffff] >> [ 0.210814] pci_bus 0000:03: resource 5 [mem 0x000a0000-0x000bffff] >> [ 0.210817] pci_bus 0000:03: resource 6 [mem 0x40000000-0xf3ffffff] >> [ 0.210819] pci_bus 0000:03: resource 7 [mem 0xf4000000-0xfcffffffff] >> [ 0.210823] pci_bus 0000:06: resource 0 [io 0x8000-0x8fff] >> [ 0.210825] pci_bus 0000:06: resource 1 [mem 0xfde00000-0xfdefffff] >> [ 0.210829] pci_bus 0000:07: resource 1 [mem 0xfdd00000-0xfddfffff] >> [ 0.210832] pci_bus 0000:07: resource 2 [mem 0x40000000-0xbfffffff >> 64bit pref] >> [ 0.210889] NET: Registered protocol family 2 >> [ 0.210997] IP route cache hash table entries: 32768 (order: 6, 262144 bytes) >> [ 0.211618] TCP established hash table entries: 131072 (order: 9, >> 2097152 bytes) >> [ 0.211618] Switched to NOHz mode on CPU #0 >> [ 0.211618] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) >> [ 0.211618] TCP: Hash tables configured (established 131072 bind 65536) >> [ 0.211618] TCP reno registered >> [ 0.211618] UDP hash table entries: 512 (order: 2, 16384 bytes) >> [ 0.211618] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) >> [ 0.211618] NET: Registered protocol family 1 >> [ 0.211618] pci 0000:00:00.0: Found enabled HT MSI Mapping >> [ 0.211618] pci 0000:00:00.0: Found enabled HT MSI Mapping >> [ 0.284092] pci 0000:00:0d.0: Enabling HT MSI Mapping >> [ 0.284144] pci 0000:00:0d.1: Enabling HT MSI Mapping >> [ 0.284195] pci 0000:00:0d.2: Enabling HT MSI Mapping >> [ 0.284246] pci 0000:00:0e.0: Enabling HT MSI Mapping >> [ 0.284302] pci 0000:00:0e.1: Enabling HT MSI Mapping >> [ 0.284369] pci 0000:00:10.0: Enabling HT MSI Mapping >> [ 0.284444] pci 0000:00:11.0: Enabling HT MSI Mapping >> [ 0.284522] pci 0000:00:12.0: Enabling HT MSI Mapping >> [ 0.284607] pci 0000:00:14.0: Enabling HT MSI Mapping >> [ 0.284700] pci 0000:00:16.0: Enabling HT MSI Mapping >> [ 0.284799] pci 0000:00:17.0: Enabling HT MSI Mapping >> [ 0.284819] pci 0000:02:00.0: Boot video device >> [ 0.284831] PCI: CLS 32 bytes, default 64 >> [ 0.285098] Trying to unpack rootfs image as initramfs... >> [ 0.344652] audit: initializing netlink socket (disabled) >> [ 0.344669] type=2000 audit(1341483327.344:1): initialized >> [ 0.404317] HugeTLB registered 2 MB page size, pre-allocated 0 pages >> [ 0.424439] VFS: Disk quotas dquot_6.5.2 >> [ 0.424513] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) >> [ 0.425308] fuse init (API version 7.16) >> [ 0.425414] msgmni has been set to 1963 >> [ 0.440402] Block layer SCSI generic (bsg) driver version 0.4 >> loaded (major 253) >> [ 0.440477] io scheduler noop registered >> [ 0.440480] io scheduler deadline registered >> [ 0.440534] io scheduler cfq registered (default) >> [ 0.440728] pcieport 0000:00:03.0: setting latency timer to 64 >> [ 0.440760] pcieport 0000:00:03.0: irq 40 for MSI/MSI-X >> [ 0.444244] pcieport 0000:00:04.0: setting latency timer to 64 >> [ 0.444282] pcieport 0000:00:04.0: irq 41 for MSI/MSI-X >> [ 0.444432] pcieport 0000:00:12.0: setting latency timer to 64 >> [ 0.444466] pcieport 0000:00:12.0: irq 42 for MSI/MSI-X >> [ 0.448208] pcieport 0000:00:14.0: setting latency timer to 64 >> [ 0.448254] pcieport 0000:00:14.0: irq 43 for MSI/MSI-X >> [ 0.448412] pcieport 0000:00:16.0: setting latency timer to 64 >> [ 0.448442] pcieport 0000:00:16.0: irq 44 for MSI/MSI-X >> [ 0.452176] pcieport 0000:00:17.0: setting latency timer to 64 >> [ 0.452222] pcieport 0000:00:17.0: irq 45 for MSI/MSI-X >> [ 0.452360] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 >> [ 0.452392] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 >> [ 0.452556] input: Power Button as >> /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 >> [ 0.452563] ACPI: Power Button [PWRB] >> [ 0.452629] input: Power Button as >> /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 >> [ 0.452632] ACPI: Power Button [PWRF] >> [ 0.452690] ACPI: Fan [FAN] (on) >> [ 0.452701] ACPI: acpi_idle registered with cpuidle >> [ 0.456108] thermal LNXTHERM:00: registered as thermal_zone0 >> [ 0.456111] ACPI: Thermal Zone [THRM] (40 C) >> [ 0.456141] ERST: Table is not found! >> [ 0.456253] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled >> [ 0.476673] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A >> [ 0.517837] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A >> [ 0.540414] Linux agpgart interface v0.103 >> [ 0.541735] brd: module loaded >> [ 0.542323] loop: module loaded >> [ 0.548199] pata_acpi 0000:00:0c.0: setting latency timer to 64 >> [ 0.548563] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23 >> [ 0.548588] pata_acpi 0000:00:0d.0: PCI INT A -> Link[APSI] -> GSI >> 23 (level, low) -> IRQ 23 >> [ 0.548612] pata_acpi 0000:00:0d.0: setting latency timer to 64 >> [ 0.548621] pata_acpi 0000:00:0d.0: PCI INT A disabled >> [ 0.548822] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 22 >> [ 0.548834] pata_acpi 0000:00:0d.1: PCI INT B -> Link[APSJ] -> GSI >> 22 (level, low) -> IRQ 22 >> [ 0.548852] pata_acpi 0000:00:0d.1: setting latency timer to 64 >> [ 0.548860] pata_acpi 0000:00:0d.1: PCI INT B disabled >> [ 0.552361] ACPI: PCI Interrupt Link [ASA2] enabled at IRQ 21 >> [ 0.552388] pata_acpi 0000:00:0d.2: PCI INT C -> Link[ASA2] -> GSI >> 21 (level, low) -> IRQ 21 >> [ 0.552432] pata_acpi 0000:00:0d.2: setting latency timer to 64 >> [ 0.552447] pata_acpi 0000:00:0d.2: PCI INT C disabled >> [ 0.560554] Fixed MDIO Bus: probed >> [ 0.560588] PPP generic driver version 2.4.2 >> [ 0.560665] tun: Universal TUN/TAP device driver, 1.6 >> [ 0.560667] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> >> [ 0.560794] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver >> [ 0.561141] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 20 >> [ 0.561166] ehci_hcd 0000:00:0a.1: PCI INT B -> Link[APCL] -> GSI >> 20 (level, low) -> IRQ 20 >> [ 0.561191] ehci_hcd 0000:00:0a.1: setting latency timer to 64 >> [ 0.561195] ehci_hcd 0000:00:0a.1: EHCI Host Controller >> [ 0.561250] ehci_hcd 0000:00:0a.1: new USB bus registered, assigned >> bus number 1 >> [ 0.561282] ehci_hcd 0000:00:0a.1: debug port 1 >> [ 0.561291] ehci_hcd 0000:00:0a.1: cache line size of 32 is not supported >> [ 0.561321] ehci_hcd 0000:00:0a.1: irq 20, io mem 0xfe02e000 >> [ 0.572237] ehci_hcd 0000:00:0a.1: USB 2.0 started, EHCI 1.00 >> [ 0.572474] hub 1-0:1.0: USB hub found >> [ 0.572480] hub 1-0:1.0: 10 ports detected >> [ 0.572634] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver >> [ 0.576406] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23 >> [ 0.576417] ohci_hcd 0000:00:0a.0: PCI INT A -> Link[APCF] -> GSI >> 23 (level, low) -> IRQ 23 >> [ 0.576445] ohci_hcd 0000:00:0a.0: setting latency timer to 64 >> [ 0.576449] ohci_hcd 0000:00:0a.0: OHCI Host Controller >> [ 0.576545] ohci_hcd 0000:00:0a.0: new USB bus registered, assigned >> bus number 2 >> [ 0.576597] ohci_hcd 0000:00:0a.0: irq 23, io mem 0xfe02f000 >> [ 0.634403] hub 2-0:1.0: USB hub found >> [ 0.634413] hub 2-0:1.0: 10 ports detected >> [ 0.634541] uhci_hcd: USB Universal Host Controller Interface driver >> [ 0.634647] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 >> [ 0.634649] i8042: PNP: PS/2 appears to have AUX port disabled, if >> this is incorrect please boot with i8042.nopnp >> [ 0.634812] serio: i8042 KBD port at 0x60,0x64 irq 1 >> [ 0.634905] mousedev: PS/2 mouse device common for all mice >> [ 0.635028] rtc_cmos 00:04: RTC can wake from S4 >> [ 0.635158] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 >> [ 0.635192] rtc0: alarms up to one year, y3k, 242 bytes nvram >> [ 0.635323] device-mapper: uevent: version 1.0.3 >> [ 0.635409] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) >> initialised: dm-devel@redhat.com >> [ 0.635422] cpuidle: using governor ladder >> [ 0.635424] cpuidle: using governor menu >> [ 0.635426] EFI Variables Facility v0.08 2004-May-17 >> [ 0.635689] TCP cubic registered >> [ 0.635836] NET: Registered protocol family 10 >> [ 0.636519] NET: Registered protocol family 17 >> [ 0.636542] Registering the dns_resolver key type >> [ 0.636666] PM: Hibernation image not present or could not be loaded. >> [ 0.636680] registered taskstats version 1 >> [ 0.658231] input: AT Translated Set 2 keyboard as >> /devices/platform/i8042/serio0/input/input2 >> [ 0.719135] Freeing initrd memory: 13416k freed >> [ 0.736443] Magic number: 4:160:274 >> [ 0.736494] tty tty11: hash matches >> [ 0.736575] rtc_cmos 00:04: setting system clock to 2012-07-05 >> 10:15:28 UTC (1341483328) >> [ 0.736581] powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3200+ >> (1 cpu cores) (version 2.20.00) >> [ 0.742743] [Firmware Bug]: powernow-k8: No PSB or ACPI _PSS objects >> [ 0.742745] powernow-k8: Make sure that your BIOS is up to date and >> Cool'N'Quiet support is enabled in BIOS setup >> [ 0.742785] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found >> [ 0.742787] EDD information not available. >> [ 0.745106] Freeing unused kernel memory: 984k freed >> [ 0.745639] Write protecting the kernel read-only data: 10240k >> [ 0.745920] Freeing unused kernel memory: 20k freed >> [ 0.751792] Freeing unused kernel memory: 1400k freed >> [ 0.781490] udevd[128]: starting version 173 >> [ 0.936395] Floppy drive(s): fd0 is 1.44M >> [ 0.940091] usb 1-9: new high speed USB device number 3 using ehci_hcd >> [ 0.955957] FDC 0 is a post-1991 82077 >> [ 1.072155] sata_nv 0000:00:0d.0: version 3.5 >> [ 1.072178] sata_nv 0000:00:0d.0: PCI INT A -> Link[APSI] -> GSI 23 >> (level, low) -> IRQ 23 >> [ 1.072182] sata_nv 0000:00:0d.0: Using SWNCQ mode >> [ 1.072254] sata_nv 0000:00:0d.0: setting latency timer to 64 >> [ 1.075515] scsi0 : sata_nv >> [ 1.078274] scsi1 : sata_nv >> [ 1.078464] ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xdc00 irq 23 >> [ 1.078468] ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xdc08 irq 23 >> [ 1.082123] sata_nv 0000:00:0d.1: PCI INT B -> Link[APSJ] -> GSI 22 >> (level, low) -> IRQ 22 >> [ 1.082128] sata_nv 0000:00:0d.1: Using SWNCQ mode >> [ 1.082190] sata_nv 0000:00:0d.1: setting latency timer to 64 >> [ 1.083654] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) >> [ 1.085284] scsi2 : sata_nv >> [ 1.085422] scsi3 : sata_nv >> [ 1.085569] ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xc800 irq 22 >> [ 1.085573] ata4: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xc808 irq 22 >> [ 1.088699] sata_nv 0000:00:0d.2: PCI INT C -> Link[ASA2] -> GSI 21 >> (level, low) -> IRQ 21 >> [ 1.088705] sata_nv 0000:00:0d.2: Using SWNCQ mode >> [ 1.088766] sata_nv 0000:00:0d.2: setting latency timer to 64 >> [ 1.091302] scsi4 : sata_nv >> [ 1.092468] 8139cp 0000:03:07.0: This (id 10ec:8139 rev 10) is not >> an 8139C+ compatible chip, use 8139too >> [ 1.092511] scsi5 : sata_nv >> [ 1.092691] ata5: SATA max UDMA/133 cmd 0xc400 ctl 0xc000 bmdma 0xb400 irq 21 >> [ 1.092695] ata6: SATA max UDMA/133 cmd 0xbc00 ctl 0xb800 bmdma 0xb408 irq 21 >> [ 1.096098] forcedeth: Reverse Engineered nForce ethernet driver. >> Version 0.64. >> [ 1.096346] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22 >> [ 1.096354] forcedeth 0000:00:10.0: PCI INT A -> Link[APCH] -> GSI >> 22 (level, low) -> IRQ 22 >> [ 1.096360] forcedeth 0000:00:10.0: setting latency timer to 64 >> [ 1.105488] sata_sil24 0000:06:00.0: version 1.1 >> [ 1.105719] ACPI: PCI Interrupt Link [APC7] enabled at IRQ 16 >> [ 1.105742] sata_sil24 0000:06:00.0: PCI INT A -> Link[APC7] -> GSI >> 16 (level, low) -> IRQ 16 >> [ 1.105817] sata_sil24 0000:06:00.0: setting latency timer to 64 >> [ 1.108129] scsi6 : sata_sil24 >> [ 1.110239] scsi7 : sata_sil24 >> [ 1.110314] ata7: SATA max UDMA/100 host m128@0xfdeff000 port >> 0xfdef8000 irq 16 >> [ 1.110319] ata8: SATA max UDMA/100 host m128@0xfdeff000 port >> 0xfdefa000 irq 16 >> [ 1.384023] usb 2-4: new low speed USB device number 2 using ohci_hcd >> [ 1.388026] ata1: SATA link down (SStatus 0 SControl 300) >> [ 1.400025] ata3: SATA link down (SStatus 0 SControl 300) >> [ 1.404022] ata5: SATA link down (SStatus 0 SControl 300) >> [ 1.620740] forcedeth 0000:00:10.0: ifname eth0, PHY OUI 0x5043 @ >> 1, addr 00:18:f3:91:04:61 >> [ 1.620746] forcedeth 0000:00:10.0: highdma csum vlan pwrctl mgmt >> gbit lnktim msi desc-v3 >> [ 1.621174] ACPI: PCI Interrupt Link [AMC1] enabled at IRQ 21 >> [ 1.621182] forcedeth 0000:00:11.0: PCI INT A -> Link[AMC1] -> GSI >> 21 (level, low) -> IRQ 21 >> [ 1.621188] forcedeth 0000:00:11.0: setting latency timer to 64 >> [ 1.856034] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) >> [ 1.864394] ata2.00: ATA-8: ST3500413AS, JC45, max UDMA/133 >> [ 1.864397] ata2.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 31/32) >> [ 1.880387] ata2.00: configured for UDMA/133 >> [ 1.880521] scsi 1:0:0:0: Direct-Access ATA ST3500413AS >> JC45 PQ: 0 ANSI: 5 >> [ 1.880726] sd 1:0:0:0: Attached scsi generic sg0 type 0 >> [ 1.880864] sd 1:0:0:0: [sda] 976773168 512-byte logical blocks: >> (500 GB/465 GiB) >> [ 1.880919] sd 1:0:0:0: [sda] Write Protect is off >> [ 1.880923] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 >> [ 1.880947] sd 1:0:0:0: [sda] Write cache: enabled, read cache: >> enabled, doesn't support DPO or FUA >> [ 1.927481] sda: sda1 < sda5 sda6 > sda2 sda3 sda4 >> [ 1.928075] sd 1:0:0:0: [sda] Attached SCSI disk >> [ 2.144831] forcedeth 0000:00:11.0: ifname eth1, PHY OUI 0x5043 @ >> 1, addr 00:18:f3:91:0e:29 >> [ 2.144837] forcedeth 0000:00:11.0: highdma csum vlan pwrctl mgmt >> gbit lnktim msi desc-v3 >> [ 2.145185] pata_amd 0000:00:0c.0: version 0.4.1 >> [ 2.145239] pata_amd 0000:00:0c.0: setting latency timer to 64 >> [ 2.145780] scsi8 : pata_amd >> [ 2.145904] scsi9 : pata_amd >> [ 2.146407] ata9: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14 >> [ 2.146410] ata10: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15 >> [ 2.192030] ata4: SATA link down (SStatus 0 SControl 300) >> [ 2.340297] ata9.01: ATAPI: TSSTcorp CD-ROM SH-C522C, TS03, max UDMA/33 >> [ 2.340307] ata9: nv_mode_filter: 0x739f&0x739f->0x739f, >> BIOS=0x7000 (0xc00000) ACPI=0x701f (600:60:0x1c) >> [ 2.380226] ata9.01: configured for UDMA/33 >> [ 2.504023] ata6: SATA link down (SStatus 0 SControl 300) >> [ 3.192034] ata7: SATA link down (SStatus 0 SControl 0) >> [ 5.272040] ata8: SATA link down (SStatus 0 SControl 0) >> [ 5.272939] scsi 8:0:1:0: CD-ROM TSSTcorp CD-ROM >> SH-C522C TS03 PQ: 0 ANSI: 5 >> [ 5.274823] sr0: scsi3-mmc drive: 52x/52x cd/rw xa/form2 cdda tray >> [ 5.274827] cdrom: Uniform CD-ROM driver Revision: 3.20 >> [ 5.274977] sr 8:0:1:0: Attached scsi CD-ROM sr0 >> [ 5.275052] sr 8:0:1:0: Attached scsi generic sg1 type 5 >> [ 5.275125] ata10: port disabled. ignoring. >> [ 5.276568] 8139too: 8139too Fast Ethernet driver 0.9.28 >> [ 5.281197] ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17 >> [ 5.281223] 8139too 0000:03:07.0: PCI INT A -> Link[APC2] -> GSI 17 >> (level, low) -> IRQ 17 >> [ 5.282164] 8139too 0000:03:07.0: eth2: RealTek RTL8139 at 0x9c00, >> 00:80:48:5c:e6:a2, IRQ 17 >> [ 5.286270] ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16 >> [ 5.286280] firewire_ohci 0000:03:0b.0: PCI INT A -> Link[APC1] -> >> GSI 16 (level, low) -> IRQ 16 >> [ 5.293641] input: Logitech USB Optical Mouse as >> /devices/pci0000:00/0000:00:0a.0/usb2/2-4/2-4:1.0/input/input3 >> [ 5.293879] generic-usb 0003:046D:C05A.0001: input,hidraw0: USB HID >> v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:0a.0-4/input0 >> [ 5.293902] usbcore: registered new interface driver usbhid >> [ 5.293905] usbhid: USB HID core driver >> [ 5.340080] firewire_ohci: Added fw-ohci device 0000:03:0b.0, OHCI >> v1.10, 4 IR + 8 IT contexts, quirks 0x2 >> [ 5.728585] EXT4-fs (sda2): INFO: recovery required on readonly filesystem >> [ 5.728590] EXT4-fs (sda2): write access will be enabled during recovery >> [ 5.840621] firewire_core: created device fw0: GUID 0011d80000ec6fc1, S400 >> [ 7.195079] EXT4-fs (sda2): orphan cleanup on readonly fs >> [ 7.195094] EXT4-fs (sda2): ext4_orphan_cleanup: deleting >> unreferenced inode 4857639 >> [ 7.195135] EXT4-fs (sda2): ext4_orphan_cleanup: deleting >> unreferenced inode 4857637 >> [ 7.195203] EXT4-fs (sda2): ext4_orphan_cleanup: deleting >> unreferenced inode 4857631 >> [ 7.195218] EXT4-fs (sda2): ext4_orphan_cleanup: deleting >> unreferenced inode 4857627 >> [ 7.195232] EXT4-fs (sda2): ext4_orphan_cleanup: deleting >> unreferenced inode 4857597 >> [ 7.195246] EXT4-fs (sda2): ext4_orphan_cleanup: deleting >> unreferenced inode 4850628 >> [ 7.195260] EXT4-fs (sda2): ext4_orphan_cleanup: deleting >> unreferenced inode 4857592 >> [ 7.195274] EXT4-fs (sda2): ext4_orphan_cleanup: deleting >> unreferenced inode 4857583 >> [ 7.195290] EXT4-fs (sda2): ext4_orphan_cleanup: deleting >> unreferenced inode 13893783 >> [ 7.195304] EXT4-fs (sda2): ext4_orphan_cleanup: deleting >> unreferenced inode 13893706 >> [ 7.195318] EXT4-fs (sda2): ext4_orphan_cleanup: deleting >> unreferenced inode 4857595 >> [ 7.195331] EXT4-fs (sda2): ext4_orphan_cleanup: deleting >> unreferenced inode 4857585 >> [ 7.195344] EXT4-fs (sda2): ext4_orphan_cleanup: deleting >> unreferenced inode 4857579 >> [ 7.195358] EXT4-fs (sda2): ext4_orphan_cleanup: deleting >> unreferenced inode 4857416 >> [ 7.195382] EXT4-fs (sda2): ext4_orphan_cleanup: deleting >> unreferenced inode 4850568 >> [ 7.195396] EXT4-fs (sda2): ext4_orphan_cleanup: deleting >> unreferenced inode 4857636 >> [ 7.195408] EXT4-fs (sda2): ext4_orphan_cleanup: deleting >> unreferenced inode 4857607 >> [ 7.195420] EXT4-fs (sda2): 17 orphan inodes deleted >> [ 7.195423] EXT4-fs (sda2): recovery complete >> [ 7.390720] EXT4-fs (sda2): mounted filesystem with ordered data >> mode. Opts: (null) >> [ 17.609843] udevd[430]: starting version 173 >> [ 17.678138] Adding 1046524k swap on /dev/sda4. Priority:-1 >> extents:1 across:1046524k >> [ 17.685130] lp: driver loaded but no devices found >> [ 17.717282] Adding 3905532k swap on /dev/sda6. Priority:-2 >> extents:1 across:3905532k >> [ 17.944071] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro >> [ 18.120312] parport_pc 00:09: reported by Plug and Play ACPI >> [ 18.120344] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP] >> [ 18.257270] type=1400 audit(1341463546.017:2): apparmor="STATUS" >> operation="profile_load" name="/sbin/dhclient" pid=597 >> comm="apparmor_parser" >> [ 18.258326] type=1400 audit(1341463546.017:3): apparmor="STATUS" >> operation="profile_load" >> name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=597 >> comm="apparmor_parser" >> [ 18.258670] type=1400 audit(1341463546.017:4): apparmor="STATUS" >> operation="profile_load" >> name="/usr/lib/connman/scripts/dhclient-script" pid=597 >> comm="apparmor_parser" >> [ 18.292885] lp0: using parport0 (interrupt-driven). >> [ 18.631761] 8139too 0000:03:07.0: eth2: link down >> [ 18.632622] ADDRCONF(NETDEV_UP): eth2: link is not ready >> [ 18.649923] forcedeth 0000:00:10.0: irq 46 for MSI/MSI-X >> [ 18.650131] forcedeth 0000:00:10.0: eth0: no link during initialization >> [ 18.652588] ADDRCONF(NETDEV_UP): eth0: link is not ready >> [ 18.671024] forcedeth 0000:00:11.0: irq 47 for MSI/MSI-X >> [ 18.671233] forcedeth 0000:00:11.0: eth1: no link during initialization >> [ 18.675447] ADDRCONF(NETDEV_UP): eth1: link is not ready >> [ 18.788941] wmi: Mapper loaded >> [ 18.797503] i2c i2c-0: nForce2 SMBus adapter at 0x1c00 >> [ 18.797554] i2c i2c-1: nForce2 SMBus adapter at 0x1c40 >> [ 18.799984] NV_TCO: NV TCO WatchDog Timer Driver v0.01 >> [ 18.800497] NV_TCO: Watchdog reboot not detected. >> [ 18.801744] NV_TCO: initialized (0x1440). heartbeat=30 sec (nowayout=0) >> [ 18.931558] [drm] Initialized drm 1.1.0 20060810 >> [ 19.053511] MCE: In-kernel MCE decoding enabled. >> [ 19.072466] EDAC MC: Ver: 2.1.0 >> [ 19.075335] cfg80211: Calling CRDA to update world regulatory domain >> [ 19.086226] k8temp 0000:00:18.3: Temperature readouts might be >> wrong - check erratum #141 >> [ 19.107406] AMD64 EDAC driver v3.4.0 >> [ 19.115078] EDAC amd64: DRAM ECC disabled. >> [ 19.115086] EDAC amd64: ECC disabled in the BIOS or no ECC >> capability, module will not load. >> [ 19.115088] Either enable ECC checking or force module loading by >> setting 'ecc_enable_override'. >> [ 19.115090] (Note that use of the override may cause unknown side effects.) >> [ 19.136313] ACPI: PCI Interrupt Link [APC5] enabled at IRQ 16 >> [ 19.136324] nouveau 0000:02:00.0: PCI INT A -> Link[APC5] -> GSI 16 >> (level, low) -> IRQ 16 >> [ 19.136330] nouveau 0000:02:00.0: setting latency timer to 64 >> [ 19.137724] [drm] nouveau 0000:02:00.0: Detected an NV40 generation >> card (0x044100a2) >> [ 19.139271] [drm] nouveau 0000:02:00.0: Attempting to load BIOS >> image from PRAMIN >> [ 19.219623] [drm] nouveau 0000:02:00.0: ... appears to be valid >> [ 19.219627] [drm] nouveau 0000:02:00.0: BIT BIOS found >> [ 19.219631] [drm] nouveau 0000:02:00.0: Bios version 05.44.02.14 >> [ 19.219635] [drm] nouveau 0000:02:00.0: TMDS table version 1.1 >> [ 19.219638] [drm] nouveau 0000:02:00.0: BIT table 'd' not found >> [ 19.219641] [drm] nouveau 0000:02:00.0: Found Display Configuration >> Block version 3.0 >> [ 19.219645] [drm] nouveau 0000:02:00.0: Raw DCB entry 0: 01000300 00000028 >> [ 19.219649] [drm] nouveau 0000:02:00.0: Raw DCB entry 1: 02011310 00000028 >> [ 19.219652] [drm] nouveau 0000:02:00.0: Raw DCB entry 2: 01011312 00000000 >> [ 19.219654] [drm] nouveau 0000:02:00.0: Raw DCB entry 3: 020203f1 0080c033 >> [ 19.219658] [drm] nouveau 0000:02:00.0: DCB connector table: VHER 0x30 5 7 2 >> [ 19.219667] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 0 >> at offset 0xEC14 >> [ 19.219846] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 1 >> at offset 0xEEE9 >> [ 19.232970] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 2 >> at offset 0xF321 >> [ 19.232994] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 3 >> at offset 0xF47E >> [ 19.234105] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 4 >> at offset 0xF52C >> [ 19.234109] [drm] nouveau 0000:02:00.0: mem timing table length unknown: 14 >> [ 19.234116] [drm] nouveau 0000:02:00.0: timingset 255 does not exist >> [ 19.283633] [drm] nouveau 0000:02:00.0: 1 available performance level(s) >> [ 19.283641] [drm] nouveau 0000:02:00.0: 0: memory 400MHz core >> 350MHz fanspeed 100% >> [ 19.283652] [drm] nouveau 0000:02:00.0: c: memory 399MHz core 199MHz >> [ 19.285459] [TTM] Zone kernel: Available graphics memory: 510670 kiB. >> [ 19.285463] [TTM] Initializing pool allocator. >> [ 19.285485] [drm] nouveau 0000:02:00.0: Detected 128MiB VRAM >> [ 19.291005] [drm] nouveau 0000:02:00.0: 512 MiB GART (aperture) >> [ 19.302265] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). >> [ 19.302269] [drm] No driver support for vblank timestamp query. >> [ 19.302751] [drm] nouveau 0000:02:00.0: Setting dpms mode 3 on vga >> encoder (output 0) >> [ 19.302755] [drm] nouveau 0000:02:00.0: Setting dpms mode 3 on vga >> encoder (output 1) >> [ 19.302759] [drm] nouveau 0000:02:00.0: Setting dpms mode 3 on tmds >> encoder (output 2) >> [ 19.302762] [drm] nouveau 0000:02:00.0: Setting dpms mode 3 on TV >> encoder (output 3) >> [ 19.476604] [drm:drm_edid_block_valid] *ERROR* EDID checksum is >> invalid, remainder is 65 >> [ 19.476609] Raw EDID: >> [ 19.476613] <3>ff ff ff ff ff 00 4c 2d 17 01 37 31 52 41 02 12 >> ......L-..71RA.. >> [ 19.476616] <3>01 03 68 1f 17 78 2e ee 91 a3 54 4c 99 26 0f 50 >> ..h..x....TL.&.P >> [ 19.476619] <3>54 bf ee 80 61 59 45 59 31 59 81 80 71 4f 01 01 >> T...aYEY1Y..qO.. >> [ 19.476621] <3>01 01 01 01 ea 24 00 60 41 00 28 30 30 60 13 00 >> .....$.`A.(00`.. >> [ 19.476624] <3>38 ea 10 00 00 1e 00 00 00 fd 00 32 a0 1e 47 0b >> 8..........2..G. >> [ 19.476626] <3>00 0a 20 20 20 20 20 20 00 00 00 fc 00 53 79 6e .. >> .....Syn >> [ 19.476629] <3>63 4d 61 73 74 65 72 0a 20 20 00 00 00 ff 00 48 >> cMaster. .....H >> [ 19.476632] <3>48 41 51 31 30 39 32 33 36 0a 20 20 00 22 40 00 >> HAQ109236. ."@. >> [ 19.476634] >> [ 20.004439] [drm] nouveau 0000:02:00.0: allocated 1024x768 fb: >> 0x49000, bo ffff88003c2e1c00 >> [ 20.004561] fbcon: nouveaufb (fb0) is primary device >> [ 20.004647] Console: switching to colour frame buffer device 128x48 >> [ 20.004672] fb0: nouveaufb frame buffer device >> [ 20.004674] drm: registered panic notifier >> [ 20.004684] [drm] Initialized nouveau 0.0.16 20090420 for >> 0000:02:00.0 on minor 0 >> [ 20.018971] cfg80211: Updating information on frequency 2412 MHz >> for a 20 MHz width channel with regulatory rule: >> [ 20.018976] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm) >> [ 20.018979] cfg80211: Updating information on frequency 2417 MHz >> for a 20 MHz width channel with regulatory rule: >> [ 20.018982] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm) >> [ 20.018985] cfg80211: Updating information on frequency 2422 MHz >> for a 20 MHz width channel with regulatory rule: >> [ 20.018988] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm) >> [ 20.018990] cfg80211: Updating information on frequency 2427 MHz >> for a 20 MHz width channel with regulatory rule: >> [ 20.018993] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm) >> [ 20.018996] cfg80211: Updating information on frequency 2432 MHz >> for a 20 MHz width channel with regulatory rule: >> [ 20.018999] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm) >> [ 20.019001] cfg80211: Updating information on frequency 2437 MHz >> for a 20 MHz width channel with regulatory rule: >> [ 20.019004] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm) >> [ 20.019007] cfg80211: Updating information on frequency 2442 MHz >> for a 20 MHz width channel with regulatory rule: >> [ 20.019010] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm) >> [ 20.019012] cfg80211: Updating information on frequency 2447 MHz >> for a 20 MHz width channel with regulatory rule: >> [ 20.019015] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm) >> [ 20.019018] cfg80211: Updating information on frequency 2452 MHz >> for a 20 MHz width channel with regulatory rule: >> [ 20.019021] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm) >> [ 20.019023] cfg80211: Updating information on frequency 2457 MHz >> for a 20 MHz width channel with regulatory rule: >> [ 20.019026] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm) >> [ 20.019029] cfg80211: Updating information on frequency 2462 MHz >> for a 20 MHz width channel with regulatory rule: >> [ 20.019032] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm) >> [ 20.019034] cfg80211: Updating information on frequency 2467 MHz >> for a 20 MHz width channel with regulatory rule: >> [ 20.019038] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (600 mBi, 2000 mBm) >> [ 20.019040] cfg80211: Updating information on frequency 2472 MHz >> for a 20 MHz width channel with regulatory rule: >> [ 20.019043] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (600 mBi, 2000 mBm) >> [ 20.019046] cfg80211: Updating information on frequency 2484 MHz >> for a 20 MHz width channel with regulatory rule: >> [ 20.019049] cfg80211: 2474000 KHz - 2494000 KHz @ KHz), (600 mBi, 2000 mBm) >> [ 20.062553] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' >> [ 20.068259] ieee80211 phy0: hwaddr 00:15:af:09:cf:bc, RTL8187vB >> (default) V1 + rtl8225z2, rfkill mask 2 >> [ 20.090376] rtl8187: Customer ID is 0x00 >> [ 20.090502] Registered led device: rtl8187-phy0::radio >> [ 20.090546] Registered led device: rtl8187-phy0::tx >> [ 20.090597] Registered led device: rtl8187-phy0::rx >> [ 20.091480] rtl8187: wireless switch is on >> [ 20.091606] usbcore: registered new interface driver rtl8187 >> [ 20.204900] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 20 >> [ 20.204911] HDA Intel 0000:00:0e.1: PCI INT B -> Link[AAZA] -> GSI >> 20 (level, low) -> IRQ 20 >> [ 20.204915] hda_intel: msi for device 1043:81f6 set to 0 >> [ 20.204955] HDA Intel 0000:00:0e.1: setting latency timer to 64 >> [ 20.273135] type=1400 audit(1341463548.033:5): apparmor="STATUS" >> operation="profile_load" >> name="/usr/lib/lightdm/lightdm-guest-session-wrapper" pid=960 >> comm="apparmor_parser" >> [ 20.278014] type=1400 audit(1341463548.037:6): apparmor="STATUS" >> operation="profile_replace" name="/sbin/dhclient" pid=968 >> comm="apparmor_parser" >> [ 20.280796] type=1400 audit(1341463548.041:7): apparmor="STATUS" >> operation="profile_replace" >> name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=968 >> comm="apparmor_parser" >> [ 20.281144] type=1400 audit(1341463548.041:8): apparmor="STATUS" >> operation="profile_replace" >> name="/usr/lib/connman/scripts/dhclient-script" pid=968 >> comm="apparmor_parser" >> [ 20.356095] ppdev: user-space parallel port driver >> [ 20.398789] type=1400 audit(1341463548.157:9): apparmor="STATUS" >> operation="profile_load" name="/usr/bin/evince" pid=969 >> comm="apparmor_parser" >> [ 20.439742] type=1400 audit(1341463548.197:10): apparmor="STATUS" >> operation="profile_load" name="/usr/bin/evince-previewer" pid=969 >> comm="apparmor_parser" >> [ 20.462781] type=1400 audit(1341463548.221:11): apparmor="STATUS" >> operation="profile_load" name="/usr/bin/evince-thumbnailer" pid=969 >> comm="apparmor_parser" >> [ 20.577367] cfg80211: Updating information on frequency 2412 MHz >> for a 20 MHz width channel with regulatory rule: >> [ 20.577373] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) >> [ 20.577376] cfg80211: Updating information on frequency 2417 MHz >> for a 20 MHz width channel with regulatory rule: >> [ 20.577380] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) >> [ 20.577382] cfg80211: Updating information on frequency 2422 MHz >> for a 20 MHz width channel with regulatory rule: >> [ 20.577385] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) >> [ 20.577388] cfg80211: Updating information on frequency 2427 MHz >> for a 20 MHz width channel with regulatory rule: >> [ 20.577391] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) >> [ 20.577393] cfg80211: Updating information on frequency 2432 MHz >> for a 20 MHz width channel with regulatory rule: >> [ 20.577396] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) >> [ 20.577399] cfg80211: Updating information on frequency 2437 MHz >> for a 20 MHz width channel with regulatory rule: >> [ 20.577402] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) >> [ 20.577404] cfg80211: Updating information on frequency 2442 MHz >> for a 20 MHz width channel with regulatory rule: >> [ 20.577407] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) >> [ 20.577410] cfg80211: Updating information on frequency 2447 MHz >> for a 20 MHz width channel with regulatory rule: >> [ 20.577413] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) >> [ 20.577415] cfg80211: Updating information on frequency 2452 MHz >> for a 20 MHz width channel with regulatory rule: >> [ 20.577418] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) >> [ 20.577421] cfg80211: Updating information on frequency 2457 MHz >> for a 20 MHz width channel with regulatory rule: >> [ 20.577424] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) >> [ 20.577426] cfg80211: Updating information on frequency 2462 MHz >> for a 20 MHz width channel with regulatory rule: >> [ 20.577429] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) >> [ 20.577432] cfg80211: Updating information on frequency 2467 MHz >> for a 20 MHz width channel with regulatory rule: >> [ 20.577435] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (300 mBi, 2000 mBm) >> [ 20.577437] cfg80211: Updating information on frequency 2472 MHz >> for a 20 MHz width channel with regulatory rule: >> [ 20.577440] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (300 mBi, 2000 mBm) >> [ 20.577443] cfg80211: Updating information on frequency 2484 MHz >> for a 20 MHz width channel with regulatory rule: >> [ 20.577445] cfg80211: 2474000 KHz - 2494000 KHz @ KHz), (300 mBi, 2000 mBm) >> [ 20.577449] cfg80211: World regulatory domain updated: >> [ 20.577451] cfg80211: (start_freq - end_freq @ bandwidth), >> (max_antenna_gain, max_eirp) >> [ 20.577454] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), >> (300 mBi, 2000 mBm) >> [ 20.577457] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), >> (300 mBi, 2000 mBm) >> [ 20.577460] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), >> (300 mBi, 2000 mBm) >> [ 20.577463] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), >> (300 mBi, 2000 mBm) >> [ 20.577465] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), >> (300 mBi, 2000 mBm) >> [ 20.865411] init: failsafe main process (874) killed by TERM signal >> [ 20.874553] init: apport pre-start process (1035) terminated with status 1 >> [ 20.875814] init: alsa-restore main process (1039) terminated with status 19 >> [ 20.940981] init: apport post-stop process (1061) terminated with status 1 >> [ 21.186367] [drm:drm_edid_block_valid] *ERROR* EDID checksum is >> invalid, remainder is 65 >> [ 21.186372] Raw EDID: >> [ 21.186375] <3>ff ff ff ff ff 00 4c 2d 17 01 37 31 52 41 02 12 >> ......L-..71RA.. >> [ 21.186378] <3>01 03 68 1f 17 78 2e ee 91 a3 54 4c 99 26 0f 50 >> ..h..x....TL.&.P >> [ 21.186380] <3>54 bf ee 80 61 59 45 59 31 59 81 80 71 4f 01 01 >> T...aYEY1Y..qO.. >> [ 21.186383] <3>01 01 01 01 ea 24 00 60 41 00 28 30 30 60 13 00 >> .....$.`A.(00`.. >> [ 21.186386] <3>38 ea 10 00 00 1e 00 00 00 fd 00 32 a0 1e 47 0b >> 8..........2..G. >> [ 21.186388] <3>00 0a 20 20 20 20 20 20 00 00 00 fc 00 53 79 6e .. >> .....Syn >> [ 21.186391] <3>63 4d 61 73 74 65 72 0a 20 20 00 00 00 ff 00 48 >> cMaster. .....H >> [ 21.186393] <3>48 41 51 31 30 39 32 33 36 0a 20 20 00 22 40 00 >> HAQ109236. ."@. >> [ 21.186395] >> [ 21.546958] [drm:drm_edid_block_valid] *ERROR* EDID checksum is >> invalid, remainder is 65 >> [ 21.546963] Raw EDID: >> [ 21.546966] <3>ff ff ff ff ff 00 4c 2d 17 01 37 31 52 41 02 12 >> ......L-..71RA.. >> [ 21.546969] <3>01 03 68 1f 17 78 2e ee 91 a3 54 4c 99 26 0f 50 >> ..h..x....TL.&.P >> [ 21.546972] <3>54 bf ee 80 61 59 45 59 31 59 81 80 71 4f 01 01 >> T...aYEY1Y..qO.. >> [ 21.546975] <3>01 01 01 01 ea 24 00 60 41 00 28 30 30 60 13 00 >> .....$.`A.(00`.. >> [ 21.546977] <3>38 ea 10 00 00 1e 00 00 00 fd 00 32 a0 1e 47 0b >> 8..........2..G. >> [ 21.546980] <3>00 0a 20 20 20 20 20 20 00 00 00 fc 00 53 79 6e .. >> .....Syn >> [ 21.546983] <3>63 4d 61 73 74 65 72 0a 20 20 00 00 00 ff 00 48 >> cMaster. .....H >> [ 21.546985] <3>48 41 51 31 30 39 32 33 36 0a 20 20 00 22 40 00 >> HAQ109236. ."@. >> [ 21.546987] >> [ 21.716233] Bluetooth: Core ver 2.16 >> [ 21.716360] NET: Registered protocol family 31 >> [ 21.716362] Bluetooth: HCI device and connection manager initialized >> [ 21.716366] Bluetooth: HCI socket layer initialized >> [ 21.716368] Bluetooth: L2CAP socket layer initialized >> [ 21.717277] Bluetooth: SCO socket layer initialized >> [ 21.768895] Bluetooth: RFCOMM TTY layer initialized >> [ 21.768903] Bluetooth: RFCOMM socket layer initialized >> [ 21.768905] Bluetooth: RFCOMM ver 1.11 >> [ 21.829060] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 >> [ 21.829066] Bluetooth: BNEP filters: protocol multicast >> [ 21.885383] [drm] nouveau 0000:02:00.0: Setting dpms mode 0 on vga >> encoder (output 0) >> [ 21.885390] [drm] nouveau 0000:02:00.0: Output VGA-1 is running on >> CRTC 0 using output A >> [ 23.243710] [drm:drm_edid_block_valid] *ERROR* EDID checksum is >> invalid, remainder is 65 >> [ 23.243716] Raw EDID: >> [ 23.243719] <3>ff ff ff ff ff 00 4c 2d 17 01 37 31 52 41 02 12 >> ......L-..71RA.. >> [ 23.243722] <3>01 03 68 1f 17 78 2e ee 91 a3 54 4c 99 26 0f 50 >> ..h..x....TL.&.P >> [ 23.243725] <3>54 bf ee 80 61 59 45 59 31 59 81 80 71 4f 01 01 >> T...aYEY1Y..qO.. >> [ 23.243727] <3>01 01 01 01 ea 24 00 60 41 00 28 30 30 60 13 00 >> .....$.`A.(00`.. >> [ 23.243730] <3>38 ea 10 00 00 1e 00 00 00 fd 00 32 a0 1e 47 0b >> 8..........2..G. >> [ 23.243732] <3>00 0a 20 20 20 20 20 20 00 00 00 fc 00 53 79 6e .. >> .....Syn >> [ 23.243735] <3>63 4d 61 73 74 65 72 0a 20 20 00 00 00 ff 00 48 >> cMaster. .....H >> [ 23.243738] <3>48 41 51 31 30 39 32 33 36 0a 20 20 00 22 40 00 >> HAQ109236. ."@. >> [ 23.243739] >> [ 23.558169] [drm:drm_edid_block_valid] *ERROR* EDID checksum is >> invalid, remainder is 170 >> [ 23.558174] Raw EDID: >> [ 23.558178] <3>ff ff ff ff ff 00 4c 2d 17 01 37 31 52 41 02 12 >> ......L-..71RA.. >> [ 23.558180] <3>01 03 68 1f 17 78 2e ee 91 a3 54 4c 99 26 0f 50 >> ..h..x....TL.&.P >> [ 23.558183] <3>54 bf ee 80 61 59 45 59 31 59 81 80 71 4f 01 01 >> T...aYEY1Y..qO.. >> [ 23.558186] <3>01 01 01 01 ea 24 00 60 41 00 28 30 30 60 13 00 >> .....$.`A.(00`.. >> [ 23.558188] <3>38 ea 10 00 00 1e 00 00 00 fd 00 32 a0 1e 47 0b >> 8..........2..G. >> [ 23.558191] <3>00 0a 20 20 20 20 20 20 00 00 00 fc 00 53 79 6e .. >> .....Syn >> [ 23.558193] <3>63 4d 61 73 74 65 72 0a 20 20 00 00 00 ff 00 48 >> cMaster. .....H >> [ 23.558196] <3>48 41 51 31 30 39 32 33 36 0a 20 20 00 22 a9 00 >> HAQ109236. .".. >> [ 23.558198] >> [ 23.668561] ADDRCONF(NETDEV_UP): wlan0: link is not ready >> [ 23.906269] [drm:drm_edid_block_valid] *ERROR* EDID checksum is >> invalid, remainder is 170 >> [ 23.906274] Raw EDID: >> [ 23.906277] <3>ff ff ff ff ff 00 4c 2d 17 01 37 31 52 41 02 12 >> ......L-..71RA.. >> [ 23.906280] <3>01 03 68 1f 17 78 2e ee 91 a3 54 4c 99 26 0f 50 >> ..h..x....TL.&.P >> [ 23.906283] <3>54 bf ee 80 61 59 45 59 31 59 81 80 71 4f 01 01 >> T...aYEY1Y..qO.. >> [ 23.906285] <3>01 01 01 01 ea 24 00 60 41 00 28 30 30 60 13 00 >> .....$.`A.(00`.. >> [ 23.906288] <3>38 ea 10 00 00 1e 00 00 00 fd 00 32 a0 1e 47 0b >> 8..........2..G. >> [ 23.906291] <3>00 0a 20 20 20 20 20 20 00 00 00 fc 00 53 79 6e .. >> .....Syn >> [ 23.906293] <3>63 4d 61 73 74 65 72 0a 20 20 00 00 00 ff 00 48 >> cMaster. .....H >> [ 23.906296] <3>48 41 51 31 30 39 32 33 36 0a 20 20 00 22 a9 00 >> HAQ109236. .".. >> [ 23.906298] >> [ 24.391130] [drm:drm_edid_block_valid] *ERROR* EDID checksum is >> invalid, remainder is 170 >> [ 24.391135] Raw EDID: >> [ 24.391139] <3>ff ff ff ff ff 00 4c 2d 17 01 37 31 52 41 02 12 >> ......L-..71RA.. >> [ 24.391142] <3>01 03 68 1f 17 78 2e ee 91 a3 54 4c 99 26 0f 50 >> ..h..x....TL.&.P >> [ 24.391145] <3>54 bf ee 80 61 59 45 59 31 59 81 80 71 4f 01 01 >> T...aYEY1Y..qO.. >> [ 24.391147] <3>01 01 01 01 ea 24 00 60 41 00 28 30 30 60 13 00 >> .....$.`A.(00`.. >> [ 24.391150] <3>38 ea 10 00 00 1e 00 00 00 fd 00 32 a0 1e 47 0b >> 8..........2..G. >> [ 24.391152] <3>00 0a 20 20 20 20 20 20 00 00 00 fc 00 53 79 6e .. >> .....Syn >> [ 24.391155] <3>63 4d 61 73 74 65 72 0a 20 20 00 00 00 ff 00 48 >> cMaster. .....H >> [ 24.391158] <3>48 41 51 31 30 39 32 33 36 0a 20 20 00 22 a9 00 >> HAQ109236. .".. >> [ 24.391160] >> [ 24.794986] [drm:drm_edid_block_valid] *ERROR* EDID checksum is >> invalid, remainder is 170 >> [ 24.794991] Raw EDID: >> [ 24.794995] <3>ff ff ff ff ff 00 4c 2d 17 01 37 31 52 41 02 12 >> ......L-..71RA.. >> [ 24.794998] <3>01 03 68 1f 17 78 2e ee 91 a3 54 4c 99 26 0f 50 >> ..h..x....TL.&.P >> [ 24.795000] <3>54 bf ee 80 61 59 45 59 31 59 81 80 71 4f 01 01 >> T...aYEY1Y..qO.. >> [ 24.795003] <3>01 01 01 01 ea 24 00 60 41 00 28 30 30 60 13 00 >> .....$.`A.(00`.. >> [ 24.795006] <3>38 ea 10 00 00 1e 00 00 00 fd 00 32 a0 1e 47 0b >> 8..........2..G. >> [ 24.795008] <3>00 0a 20 20 20 20 20 20 00 00 00 fc 00 53 79 6e .. >> .....Syn >> [ 24.795011] <3>63 4d 61 73 74 65 72 0a 20 20 00 00 00 ff 00 48 >> cMaster. .....H >> [ 24.795013] <3>48 41 51 31 30 39 32 33 36 0a 20 20 00 22 a9 00 >> HAQ109236. .".. >> [ 24.795015] >> [ 25.060335] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro,commit=0 >> [ 25.449511] init: plymouth-stop pre-start process (1448) terminated >> with status 1 >> [ 26.967958] [drm:drm_edid_block_valid] *ERROR* EDID checksum is >> invalid, remainder is 170 >> [ 26.967963] Raw EDID: >> [ 26.967967] <3>ff ff ff ff ff 00 4c 2d 17 01 37 31 52 41 02 12 >> ......L-..71RA.. >> [ 26.967970] <3>01 03 68 1f 17 78 2e ee 91 a3 54 4c 99 26 0f 50 >> ..h..x....TL.&.P >> [ 26.967972] <3>54 bf ee 80 61 59 45 59 31 59 81 80 71 4f 01 01 >> T...aYEY1Y..qO.. >> [ 26.967975] <3>01 01 01 01 ea 24 00 60 41 00 28 30 30 60 13 00 >> .....$.`A.(00`.. >> [ 26.967978] <3>38 ea 10 00 00 1e 00 00 00 fd 00 32 a0 1e 47 0b >> 8..........2..G. >> [ 26.967980] <3>00 0a 20 20 20 20 20 20 00 00 00 fc 00 53 79 6e .. >> .....Syn >> [ 26.967983] <3>63 4d 61 73 74 65 72 0a 20 20 00 00 00 ff 00 48 >> cMaster. .....H >> [ 26.967985] <3>48 41 51 31 30 39 32 33 36 0a 20 20 00 22 a9 00 >> HAQ109236. .".. >> [ 26.967987] >> [ 27.295395] [drm:drm_edid_block_valid] *ERROR* EDID checksum is >> invalid, remainder is 170 >> [ 27.295401] Raw EDID: >> [ 27.295404] <3>ff ff ff ff ff 00 4c 2d 17 01 37 31 52 41 02 12 >> ......L-..71RA.. >> [ 27.295407] <3>01 03 68 1f 17 78 2e ee 91 a3 54 4c 99 26 0f 50 >> ..h..x....TL.&.P >> [ 27.295409] <3>54 bf ee 80 61 59 45 59 31 59 81 80 71 4f 01 01 >> T...aYEY1Y..qO.. >> [ 27.295412] <3>01 01 01 01 ea 24 00 60 41 00 28 30 30 60 13 00 >> .....$.`A.(00`.. >> [ 27.295414] <3>38 ea 10 00 00 1e 00 00 00 fd 00 32 a0 1e 47 0b >> 8..........2..G. >> [ 27.295417] <3>00 0a 20 20 20 20 20 20 00 00 00 fc 00 53 79 6e .. >> .....Syn >> [ 27.295420] <3>63 4d 61 73 74 65 72 0a 20 20 00 00 00 ff 00 48 >> cMaster. .....H >> [ 27.295422] <3>48 41 51 31 30 39 32 33 36 0a 20 20 00 22 a9 00 >> HAQ109236. .".. >> [ 27.295424] >> [ 30.189439] [drm:drm_edid_block_valid] *ERROR* EDID checksum is >> invalid, remainder is 41 >> [ 30.189445] Raw EDID: >> [ 30.189448] <3>ff ff ff ff ff 00 4c 2d 17 01 37 31 52 41 02 12 >> ......L-..71RA.. >> [ 30.189451] <3>01 03 68 1f 17 78 2e ee 91 a3 54 4c 99 26 0f 50 >> ..h..x....TL.&.P >> [ 30.189454] <3>54 bf ee 80 61 59 45 59 31 59 81 80 71 4f 01 01 >> T...aYEY1Y..qO.. >> [ 30.189456] <3>01 01 01 01 ea 24 00 60 41 00 28 30 30 60 13 00 >> .....$.`A.(00`.. >> [ 30.189459] <3>38 ea 10 00 00 1e 00 00 00 fd 00 32 a0 1e 47 0b >> 8..........2..G. >> [ 30.189461] <3>00 0a 20 20 20 20 20 20 00 00 00 fc 00 53 79 6e .. >> .....Syn >> [ 30.189464] <3>63 4d 61 73 74 65 72 0a 20 20 00 00 00 ff 00 48 >> cMaster. .....H >> [ 30.189466] <3>48 41 51 31 30 39 32 33 36 0a 20 20 00 22 28 00 >> HAQ109236. ."(. >> [ 30.189468] >> [ 30.518309] [drm:drm_edid_block_valid] *ERROR* EDID checksum is >> invalid, remainder is 41 >> [ 30.518314] Raw EDID: >> [ 30.518317] <3>ff ff ff ff ff 00 4c 2d 17 01 37 31 52 41 02 12 >> ......L-..71RA.. >> [ 30.518320] <3>01 03 68 1f 17 78 2e ee 91 a3 54 4c 99 26 0f 50 >> ..h..x....TL.&.P >> [ 30.518323] <3>54 bf ee 80 61 59 45 59 31 59 81 80 71 4f 01 01 >> T...aYEY1Y..qO.. >> [ 30.518326] <3>01 01 01 01 ea 24 00 60 41 00 28 30 30 60 13 00 >> .....$.`A.(00`.. >> [ 30.518328] <3>38 ea 10 00 00 1e 00 00 00 fd 00 32 a0 1e 47 0b >> 8..........2..G. >> [ 30.518331] <3>00 0a 20 20 20 20 20 20 00 00 00 fc 00 53 79 6e .. >> .....Syn >> [ 30.518333] <3>63 4d 61 73 74 65 72 0a 20 20 00 00 00 ff 00 48 >> cMaster. .....H >> [ 30.518336] <3>48 41 51 31 30 39 32 33 36 0a 20 20 00 22 28 00 >> HAQ109236. ."(. >> [ 30.518338] >> [ 31.052805] [drm:drm_edid_block_valid] *ERROR* EDID checksum is >> invalid, remainder is 41 >> [ 31.052811] Raw EDID: >> [ 31.052814] <3>ff ff ff ff ff 00 4c 2d 17 01 37 31 52 41 02 12 >> ......L-..71RA.. >> [ 31.052817] <3>01 03 68 1f 17 78 2e ee 91 a3 54 4c 99 26 0f 50 >> ..h..x....TL.&.P >> [ 31.052819] <3>54 bf ee 80 61 59 45 59 31 59 81 80 71 4f 01 01 >> T...aYEY1Y..qO.. >> [ 31.052822] <3>01 01 01 01 ea 24 00 60 41 00 28 30 30 60 13 00 >> .....$.`A.(00`.. >> [ 31.052824] <3>38 ea 10 00 00 1e 00 00 00 fd 00 32 a0 1e 47 0b >> 8..........2..G. >> [ 31.052827] <3>00 0a 20 20 20 20 20 20 00 00 00 fc 00 53 79 6e .. >> .....Syn >> [ 31.052830] <3>63 4d 61 73 74 65 72 0a 20 20 00 00 00 ff 00 48 >> cMaster. .....H >> [ 31.052832] <3>48 41 51 31 30 39 32 33 36 0a 20 20 00 22 28 00 >> HAQ109236. ."(. >> [ 31.052834] >> [ 31.394156] [drm:drm_edid_block_valid] *ERROR* EDID checksum is >> invalid, remainder is 41 >> [ 31.394161] Raw EDID: >> [ 31.394164] <3>ff ff ff ff ff 00 4c 2d 17 01 37 31 52 41 02 12 >> ......L-..71RA.. >> [ 31.394167] <3>01 03 68 1f 17 78 2e ee 91 a3 54 4c 99 26 0f 50 >> ..h..x....TL.&.P >> [ 31.394169] <3>54 bf ee 80 61 59 45 59 31 59 81 80 71 4f 01 01 >> T...aYEY1Y..qO.. >> [ 31.394172] <3>01 01 01 01 ea 24 00 60 41 00 28 30 30 60 13 00 >> .....$.`A.(00`.. >> [ 31.394175] <3>38 ea 10 00 00 1e 00 00 00 fd 00 32 a0 1e 47 0b >> 8..........2..G. >> [ 31.394177] <3>00 0a 20 20 20 20 20 20 00 00 00 fc 00 53 79 6e .. >> .....Syn >> [ 31.394180] <3>63 4d 61 73 74 65 72 0a 20 20 00 00 00 ff 00 48 >> cMaster. .....H >> [ 31.394182] <3>48 41 51 31 30 39 32 33 36 0a 20 20 00 22 28 00 >> HAQ109236. ."(. >> [ 31.394184] >> [ 31.727736] [drm:drm_edid_block_valid] *ERROR* EDID checksum is >> invalid, remainder is 41 >> [ 31.727741] Raw EDID: >> [ 31.727745] <3>ff ff ff ff ff 00 4c 2d 17 01 37 31 52 41 02 12 >> ......L-..71RA.. >> [ 31.727748] <3>01 03 68 1f 17 78 2e ee 91 a3 54 4c 99 26 0f 50 >> ..h..x....TL.&.P >> [ 31.727750] <3>54 bf ee 80 61 59 45 59 31 59 81 80 71 4f 01 01 >> T...aYEY1Y..qO.. >> [ 31.727753] <3>01 01 01 01 ea 24 00 60 41 00 28 30 30 60 13 00 >> .....$.`A.(00`.. >> [ 31.727756] <3>38 ea 10 00 00 1e 00 00 00 fd 00 32 a0 1e 47 0b >> 8..........2..G. >> [ 31.727758] <3>00 0a 20 20 20 20 20 20 00 00 00 fc 00 53 79 6e .. >> .....Syn >> [ 31.727761] <3>63 4d 61 73 74 65 72 0a 20 20 00 00 00 ff 00 48 >> cMaster. .....H >> [ 31.727763] <3>48 41 51 31 30 39 32 33 36 0a 20 20 00 22 28 00 >> HAQ109236. ."(. >> [ 31.727765] >> [ 32.111167] [drm:drm_edid_block_valid] *ERROR* EDID checksum is >> invalid, remainder is 41 >> [ 32.111172] Raw EDID: >> [ 32.111176] <3>ff ff ff ff ff 00 4c 2d 17 01 37 31 52 41 02 12 >> ......L-..71RA.. >> [ 32.111179] <3>01 03 68 1f 17 78 2e ee 91 a3 54 4c 99 26 0f 50 >> ..h..x....TL.&.P >> [ 32.111181] <3>54 bf ee 80 61 59 45 59 31 59 81 80 71 4f 01 01 >> T...aYEY1Y..qO.. >> [ 32.111184] <3>01 01 01 01 ea 24 00 60 41 00 28 30 30 60 13 00 >> .....$.`A.(00`.. >> [ 32.111187] <3>38 ea 10 00 00 1e 00 00 00 fd 00 32 a0 1e 47 0b >> 8..........2..G. >> [ 32.111189] <3>00 0a 20 20 20 20 20 20 00 00 00 fc 00 53 79 6e .. >> .....Syn >> [ 32.111192] <3>63 4d 61 73 74 65 72 0a 20 20 00 00 00 ff 00 48 >> cMaster. .....H >> [ 32.111194] <3>48 41 51 31 30 39 32 33 36 0a 20 20 00 22 28 00 >> HAQ109236. ."(. >> [ 32.111196] >> [ 32.619148] [drm:drm_edid_block_valid] *ERROR* EDID checksum is >> invalid, remainder is 41 >> [ 32.619153] Raw EDID: >> [ 32.619157] <3>ff ff ff ff ff 00 4c 2d 17 01 37 31 52 41 02 12 >> ......L-..71RA.. >> [ 32.619160] <3>01 03 68 1f 17 78 2e ee 91 a3 54 4c 99 26 0f 50 >> ..h..x....TL.&.P >> [ 32.619162] <3>54 bf ee 80 61 59 45 59 31 59 81 80 71 4f 01 01 >> T...aYEY1Y..qO.. >> [ 32.619165] <3>01 01 01 01 ea 24 00 60 41 00 28 30 30 60 13 00 >> .....$.`A.(00`.. >> [ 32.619168] <3>38 ea 10 00 00 1e 00 00 00 fd 00 32 a0 1e 47 0b >> 8..........2..G. >> [ 32.619170] <3>00 0a 20 20 20 20 20 20 00 00 00 fc 00 53 79 6e .. >> .....Syn >> [ 32.619173] <3>63 4d 61 73 74 65 72 0a 20 20 00 00 00 ff 00 48 >> cMaster. .....H >> [ 32.619175] <3>48 41 51 31 30 39 32 33 36 0a 20 20 00 22 28 00 >> HAQ109236. ."(. >> [ 32.619177] >> >> >> lspci output: >> >> 07:00.0 Multimedia video controller: Texas Instruments Device b800 (rev 01) >> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- >> Stepping- SERR- FastB2B- DisINTx- >> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- >> <TAbort- <MAbort- >SERR- <PERR- INTx- >> Latency: 0, Cache Line Size: 32 bytes >> Interrupt: pin A routed to IRQ 11 >> Region 0: Memory at fddff000 (64-bit, non-prefetchable) [size=4K] >> Region 2: Memory at bf000000 (64-bit, prefetchable) [size=16M] >> Region 4: Memory at 40000000 (64-bit, prefetchable) [size=1G] >> Capabilities: [40] Power Management version 3 >> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) >> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- >> Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+ >> Address: 0000000000000000 Data: 0000 >> Capabilities: [70] Express (v2) Endpoint, MSI 00 >> DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <1us, L1 <8us >> ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- >> DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- >> RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ >> MaxPayload 128 bytes, MaxReadReq 512 bytes >> DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr- TransPend- >> LnkCap: Port #0, Speed 5GT/s, Width x2, ASPM L0s, Latency L0 <512ns, L1 <64us >> ClockPM- Surprise- LLActRep- BwNot- >> LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ >> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- >> LnkSta: Speed 2.5GT/s, Width x2, TrErr- Train- SlotClk+ DLActive- >> BWMgmt- ABWMgmt- >> DevCap2: Completion Timeout: Range ABCD, TimeoutDis+ >> DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- >> LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, >> Selectable De-emphasis: -6dB >> Transmit Margin: Normal Operating Range, EnterModifiedCompliance- >> ComplianceSOS- >> Compliance De-emphasis: -6dB >> LnkSta2: Current De-emphasis Level: -3.5dB >> Capabilities: [100 v1] Advanced Error Reporting >> UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- >> MalfTLP- ECRC- UnsupReq- ACSViol- >> UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- >> MalfTLP- ECRC- UnsupReq- ACSViol- >> UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ >> MalfTLP+ ECRC- UnsupReq- ACSViol- >> CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+ >> CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+ >> AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn- >> 00: 4c 10 00 b8 07 00 10 00 01 00 00 04 08 00 00 00 >> 10: 04 f0 df fd 00 00 00 00 0c 00 00 bf 00 00 00 00 >> 20: 0c 00 00 40 00 00 00 00 00 00 00 00 00 00 01 00 >> 30: 00 00 00 00 40 00 00 00 00 00 00 00 0b 01 00 00 >> 40: 01 50 03 00 00 00 00 00 00 00 00 00 00 00 00 00 >> 50: 05 70 80 00 00 00 00 00 00 00 00 00 00 00 00 00 >> 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >> 70: 10 00 02 00 01 87 00 00 10 28 09 00 22 34 03 00 >> 80: 40 00 21 10 00 00 00 00 00 00 00 00 00 00 00 00 >> 90: 00 00 00 00 1f 00 00 00 00 00 00 00 00 00 00 00 >> a0: 02 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 >> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >> >> Regards, >> Flyingbee. >> >> >> On Wed, Jul 4, 2012 at 7:29 PM, Bjorn Helgaas <bhelgaas@google.com> wrote: >>> On Wed, Jul 4, 2012 at 12:33 AM, sumit chaudhary >>> <flyingbee.linux@gmail.com> wrote: >>>> Hi, >>>> I have a 64 bit PCIe card that is connected to 64 bit PC running >>>> ubuntu (Linux ubuntu 3.0.0-12-generic #20-Ubuntu SMP Fri Oct 7 >>>> 14:56:25 UTC 2011 x86_64 x86_64 x86_64 GNU/Linux). Linux enumerate >>>> this PCIe card and assign 64 bit addresses to 64 bit BARS. >>>> >>>> Problem is that higher 4 bytes of these addresses are zero, even if >>>> they are 64 bit address >>>> they lies in 32 bit range. >>>> >>>> Is it somehow possible to assign real 64 bit addresses ? >>>> >>>> This is lspci output on my ubuntu PC. >>>> >>>> Region 0: Memory at fddff000 (64-bit, non-prefetchable) [size=4K] >>>> Region 2: Memory at fd000000 (64-bit, prefetchable) [size=8M] >>>> Region 4: Memory at fc800000 (64-bit, prefetchable) [size=8M] >>> >>> Thanks for this report. 64-bit addresses should work, so there must >>> be a problem here. Can you collect the complete dmesg log? That will >>> contain more details about exactly what's going on. A dmesg log from >>> a more recent kernel, e.g., 3.4, would also be useful, just in case >>> this problem has already been fixed. >>> >>> Bjorn ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: 64 bit address to a pcie card 2012-07-09 5:39 ` sumit chaudhary @ 2012-07-09 8:41 ` Yinghai Lu 0 siblings, 0 replies; 7+ messages in thread From: Yinghai Lu @ 2012-07-09 8:41 UTC (permalink / raw) To: sumit chaudhary; +Cc: Bjorn Helgaas, linux-pci [-- Attachment #1: Type: text/plain, Size: 972 bytes --] On Sun, Jul 8, 2012 at 10:39 PM, sumit chaudhary <flyingbee.linux@gmail.com> wrote: > Hi Bjorn, > > Device is working as expected but problem is that I want to test this > device with real 64 bit addresses that lies above 4GB. > is there a way to allocate addresses above 4GB range ? > If I try to allocate BAR size more than 2GB i.e. to push allocated > address above 4GB, I increase resource size asked from OS > than host system stopped booting and hangs. > I also tried enumerating PCI subsystem using kernel command line > option pci_assign = buses, but same problem persist. > I also tried Increasing RAM of my system to 4 GB but still address > allocation is in 32 bit range. you can check my for-pci-res_alloc branch and attached patch. git://git.kernel.org/pub/scm/linux/kernel/git/yinghai/linux-yinghai.git for-pci-res-alloc and you need to boot with pci=pref_bar. it will clear pref_bar and assign mem64 bar to above at first. Thanks Yinghai [-- Attachment #2: pci_assign_pref.patch --] [-- Type: application/octet-stream, Size: 2689 bytes --] Subject: [PATCH] PCI, x86: Add pci=pref_bar to realloc pref bars So could reallocate 64bit pref mem above 4g. Signed-off-by: Yinghai Lu <yinghai@kernel.org> --- arch/x86/include/asm/pci_x86.h | 1 + arch/x86/pci/common.c | 3 +++ arch/x86/pci/i386.c | 20 +++++++++++++------- 3 files changed, 17 insertions(+), 7 deletions(-) Index: linux-2.6/arch/x86/include/asm/pci_x86.h =================================================================== --- linux-2.6.orig/arch/x86/include/asm/pci_x86.h +++ linux-2.6/arch/x86/include/asm/pci_x86.h @@ -35,6 +35,7 @@ do { \ #define PCI_NOASSIGN_ROMS 0x80000 #define PCI_ROOT_NO_CRS 0x100000 #define PCI_NOASSIGN_BARS 0x200000 +#define PCI_ASSIGN_PREF_BARS 0x400000 extern unsigned int pci_probe; extern unsigned long pirq_table_addr; Index: linux-2.6/arch/x86/pci/common.c =================================================================== --- linux-2.6.orig/arch/x86/pci/common.c +++ linux-2.6/arch/x86/pci/common.c @@ -573,6 +573,9 @@ char * __devinit pcibios_setup(char *st } else if (!strcmp(str, "assign-busses")) { pci_probe |= PCI_ASSIGN_ALL_BUSSES; return NULL; + } else if (!strcmp(str, "pref_bar")) { + pci_probe |= PCI_ASSIGN_PREF_BARS; + return NULL; } else if (!strcmp(str, "use_crs")) { pci_probe |= PCI_USE__CRS; return NULL; Index: linux-2.6/arch/x86/pci/i386.c =================================================================== --- linux-2.6.orig/arch/x86/pci/i386.c +++ linux-2.6/arch/x86/pci/i386.c @@ -212,7 +212,9 @@ static void pcibios_allocate_bridge_reso continue; if (!r->flags) continue; - if (!r->start || pci_claim_resource(dev, idx) < 0) { + if (((r->flags & IORESOURCE_PREFETCH) && + (pci_probe & PCI_ASSIGN_PREF_BARS)) || + !r->start || pci_claim_resource(dev, idx) < 0) { /* * Something is wrong with the region. * Invalidate the resource to prevent @@ -253,15 +255,19 @@ static void pcibios_allocate_dev_resourc else disabled = !(command & PCI_COMMAND_MEMORY); if (pass == disabled) { + if ((r->flags & IORESOURCE_PREFETCH) && + (pci_probe & PCI_ASSIGN_PREF_BARS)) + goto clear_start; dev_dbg(&dev->dev, "BAR %d: reserving %pr (d=%d, p=%d)\n", idx, r, disabled, pass); - if (pci_claim_resource(dev, idx) < 0) { - /* We'll assign a new address later */ - pcibios_save_fw_addr(dev, idx, r->start); - r->end -= r->start; - r->start = 0; - } + if (!pci_claim_resource(dev, idx)) + continue; +clear_start: + /* We'll assign a new address later */ + pcibios_save_fw_addr(dev, idx, r->start); + r->end -= r->start; + r->start = 0; } } if (!pass) { ^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2012-07-09 8:41 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2012-07-04 6:33 64 bit address to a pcie card sumit chaudhary
2012-07-04 13:59 ` Bjorn Helgaas
[not found] ` <CAJkVMNpZaMKm8tc+axdOBySpp68_j=EegEUOO+B=cYudsxNCgw@mail.gmail.com>
2012-07-05 15:16 ` Bjorn Helgaas
2012-07-06 0:14 ` Yinghai Lu
2012-07-06 3:49 ` Bjorn Helgaas
2012-07-09 5:39 ` sumit chaudhary
2012-07-09 8:41 ` Yinghai Lu
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).