* linux <=4.9.5, 4.10-rc7 ok, 4.9.6 - 4.9.8 nok with realtek wlan, atom
@ 2017-02-09 14:45 rupert THURNER
2017-02-09 19:43 ` Bjorn Helgaas
0 siblings, 1 reply; 4+ messages in thread
From: rupert THURNER @ 2017-02-09 14:45 UTC (permalink / raw)
To: linux-pci
hi,
not technical expert enough, i just wanted to give a short user
feedback. for realtek wlan on atom, kernels up to 4.9.5 are ok, and
kernel 4.10.0-rc7-g926af6273fc6 (arch linux-git version numbering) as
well. kernels 4.9.6, 4.9.7, and 4.9.8 fail, i.e. connection to a WLAN
hotspot is possible then drops, or connecting to wlan fails
alltogether.
24: PCI 300.0: 0282 WLAN controller
[Created at pci.366]
Model: "Realtek RTL8188CE 802.11b/g/n WiFi Adapter"
Device: pci 0x8176 "RTL8188CE 802.11b/g/n WiFi Adapter"
Revision: 0x01
Driver: "rtl8192ce"
Driver Modules: "rtl8192ce"
Device File: wlp3s0
Features: WLAN
best
rupert
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: linux <=4.9.5, 4.10-rc7 ok, 4.9.6 - 4.9.8 nok with realtek wlan, atom
2017-02-09 14:45 linux <=4.9.5, 4.10-rc7 ok, 4.9.6 - 4.9.8 nok with realtek wlan, atom rupert THURNER
@ 2017-02-09 19:43 ` Bjorn Helgaas
2017-02-09 20:09 ` Larry Finger
0 siblings, 1 reply; 4+ messages in thread
From: Bjorn Helgaas @ 2017-02-09 19:43 UTC (permalink / raw)
To: rupert THURNER
Cc: linux-pci, Larry Finger, Chaoming Li, Kalle Valo, linux-wireless,
netdev, linux-kernel
[+cc rtl8192ce folks in case they've seen this]
On Thu, Feb 09, 2017 at 03:45:01PM +0100, rupert THURNER wrote:
> hi,
>
> not technical expert enough, i just wanted to give a short user
> feedback. for realtek wlan on atom, kernels up to 4.9.5 are ok, and
> kernel 4.10.0-rc7-g926af6273fc6 (arch linux-git version numbering) as
> well. kernels 4.9.6, 4.9.7, and 4.9.8 fail, i.e. connection to a WLAN
> hotspot is possible then drops, or connecting to wlan fails
> alltogether.
Thanks very much for your report, and sorry for the inconvenience.
v4.10-rc7 works, so I guess we don't need to worry about fixing v4.10.
But the stable kernels v4.9.6, v4.9.7, and v4.9.8 are broken, so we
need to figure out why and make sure we fix the v4.9 stable series.
I can't tell yet whether this is PCI-related or not. If it is,
4922a6a5cfa7 ("PCI: Enumerate switches below PCI-to-PCIe bridges")
appeared in v4.9.6, and there is a known issue with that. The issue
should be fixed by 610c2b7ff8f6 ("PCI/ASPM: Handle PCI-to-PCIe bridges
as roots of PCIe hierarchies"), which appeared in v4.9.9, so I guess
the first thing to do would be to test v4.9.9.
If it's not fixed in v4.9.9, can you share the complete dmesg log
(output of "dmesg" command) and "lspci -vv" output for v4.9.5 (last
known working version) and v4.9.6 (first known broken version)? On
v4.9.6, collect the dmesg output after the failure occurs.
> 24: PCI 300.0: 0282 WLAN controller
> [Created at pci.366]
> Model: "Realtek RTL8188CE 802.11b/g/n WiFi Adapter"
> Device: pci 0x8176 "RTL8188CE 802.11b/g/n WiFi Adapter"
> Revision: 0x01
> Driver: "rtl8192ce"
> Driver Modules: "rtl8192ce"
> Device File: wlp3s0
> Features: WLAN
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: linux <=4.9.5, 4.10-rc7 ok, 4.9.6 - 4.9.8 nok with realtek wlan, atom
2017-02-09 19:43 ` Bjorn Helgaas
@ 2017-02-09 20:09 ` Larry Finger
2017-02-11 17:42 ` rupert THURNER
0 siblings, 1 reply; 4+ messages in thread
From: Larry Finger @ 2017-02-09 20:09 UTC (permalink / raw)
To: Bjorn Helgaas, rupert THURNER
Cc: linux-pci, Chaoming Li, Kalle Valo, linux-wireless, netdev, linux-kernel
On 02/09/2017 01:43 PM, Bjorn Helgaas wrote:
> [+cc rtl8192ce folks in case they've seen this]
>
> On Thu, Feb 09, 2017 at 03:45:01PM +0100, rupert THURNER wrote:
>> hi,
>>
>> not technical expert enough, i just wanted to give a short user
>> feedback. for realtek wlan on atom, kernels up to 4.9.5 are ok, and
>> kernel 4.10.0-rc7-g926af6273fc6 (arch linux-git version numbering) as
>> well. kernels 4.9.6, 4.9.7, and 4.9.8 fail, i.e. connection to a WLAN
>> hotspot is possible then drops, or connecting to wlan fails
>> alltogether.
>
> Thanks very much for your report, and sorry for the inconvenience.
>
> v4.10-rc7 works, so I guess we don't need to worry about fixing v4.10.
>
> But the stable kernels v4.9.6, v4.9.7, and v4.9.8 are broken, so we
> need to figure out why and make sure we fix the v4.9 stable series.
>
> I can't tell yet whether this is PCI-related or not. If it is,
> 4922a6a5cfa7 ("PCI: Enumerate switches below PCI-to-PCIe bridges")
> appeared in v4.9.6, and there is a known issue with that. The issue
> should be fixed by 610c2b7ff8f6 ("PCI/ASPM: Handle PCI-to-PCIe bridges
> as roots of PCIe hierarchies"), which appeared in v4.9.9, so I guess
> the first thing to do would be to test v4.9.9.
>
> If it's not fixed in v4.9.9, can you share the complete dmesg log
> (output of "dmesg" command) and "lspci -vv" output for v4.9.5 (last
> known working version) and v4.9.6 (first known broken version)? On
> v4.9.6, collect the dmesg output after the failure occurs.
>
>> 24: PCI 300.0: 0282 WLAN controller
>> [Created at pci.366]
>> Model: "Realtek RTL8188CE 802.11b/g/n WiFi Adapter"
>> Device: pci 0x8176 "RTL8188CE 802.11b/g/n WiFi Adapter"
>> Revision: 0x01
>> Driver: "rtl8192ce"
>> Driver Modules: "rtl8192ce"
>> Device File: wlp3s0
>> Features: WLAN
It would be helpful if someone were to bisect this issue. The only issue that
comes to mind was fixed in commit 52f5631a4c05 ("rtlwifi: rtl8192ce: Fix loading
of incorrect firmware") which is in 4.10-rc7 and will be backported to 4.9.
The above issue is one that could not be reproduced on my hardware, thus it took
Jurij Smakov to find the fix. Without his bisection of the problem, who knows
how long it would have taken to find my edit mistake.
Larry
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: linux <=4.9.5, 4.10-rc7 ok, 4.9.6 - 4.9.8 nok with realtek wlan, atom
2017-02-09 20:09 ` Larry Finger
@ 2017-02-11 17:42 ` rupert THURNER
0 siblings, 0 replies; 4+ messages in thread
From: rupert THURNER @ 2017-02-11 17:42 UTC (permalink / raw)
To: Larry Finger
Cc: Bjorn Helgaas, linux-pci, Chaoming Li, Kalle Valo,
linux-wireless, netdev, linux-kernel
On Thu, Feb 9, 2017 at 9:09 PM, Larry Finger <Larry.Finger@lwfinger.net> wrote:
> On 02/09/2017 01:43 PM, Bjorn Helgaas wrote:
>>
>> [+cc rtl8192ce folks in case they've seen this]
>>
>> On Thu, Feb 09, 2017 at 03:45:01PM +0100, rupert THURNER wrote:
>>>
>>> hi,
>>>
>>> not technical expert enough, i just wanted to give a short user
>>> feedback. for realtek wlan on atom, kernels up to 4.9.5 are ok, and
>>> kernel 4.10.0-rc7-g926af6273fc6 (arch linux-git version numbering) as
>>> well. kernels 4.9.6, 4.9.7, and 4.9.8 fail, i.e. connection to a WLAN
>>> hotspot is possible then drops, or connecting to wlan fails
>>> alltogether.
>>
>>
>> Thanks very much for your report, and sorry for the inconvenience.
>>
>> v4.10-rc7 works, so I guess we don't need to worry about fixing v4.10.
>>
>> But the stable kernels v4.9.6, v4.9.7, and v4.9.8 are broken, so we
>> need to figure out why and make sure we fix the v4.9 stable series.
>>
>> I can't tell yet whether this is PCI-related or not. If it is,
>> 4922a6a5cfa7 ("PCI: Enumerate switches below PCI-to-PCIe bridges")
>> appeared in v4.9.6, and there is a known issue with that. The issue
>> should be fixed by 610c2b7ff8f6 ("PCI/ASPM: Handle PCI-to-PCIe bridges
>> as roots of PCIe hierarchies"), which appeared in v4.9.9, so I guess
>> the first thing to do would be to test v4.9.9.
>>
>> If it's not fixed in v4.9.9, can you share the complete dmesg log
>> (output of "dmesg" command) and "lspci -vv" output for v4.9.5 (last
>> known working version) and v4.9.6 (first known broken version)? On
>> v4.9.6, collect the dmesg output after the failure occurs.
>
> It would be helpful if someone were to bisect this issue. The only issue
> that comes to mind was fixed in commit 52f5631a4c05 ("rtlwifi: rtl8192ce:
> Fix loading of incorrect firmware") which is in 4.10-rc7 and will be
> backported to 4.9.
thanks for the quick and very helpful hints! larry, it matches what
you write - 4.9.9 dropped the connection after a couple of hours.
lspci -vv is the same for 4.9.5 and 4.9.6. dmesg for both below. in
this case with 4.9.6 it did never get a network connection after boot.
$ sudo lspci -vv
00:00.0 Host bridge: Intel Corporation Atom Processor
D4xx/D5xx/N4xx/N5xx DMI Bridge (rev 02)
Subsystem: Intel Corporation Atom Processor D4xx/D5xx/N4xx/N5xx DMI Bridge
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: [e0] Vendor Specific Information: Len=08 <?>
Kernel modules: intel_agp
00:1b.0 Audio device: Intel Corporation NM10/ICH7 Family High
Definition Audio Controller (rev 02)
Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device 2005
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 27
Region 0: Memory at fcffc000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee0f00c Data: 4152
Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0
ExtTag- RBE-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
Status: NegoPending- InProgress-
VC1: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable- ID=0 ArbSelect=Fixed TC/VC=00
Status: NegoPending- InProgress-
Capabilities: [130 v1] Root Complex Link
Desc: PortNumber=0f ComponentID=00 EltType=Config
Link0: Desc: TargetPort=00 TargetComponent=00 AssocRCRB-
LinkType=MemMapped LinkValid+
Addr: 00000000fed1c000
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00:1c.0 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express
Port 1 (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 24
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: fd000000-fe9fffff
Prefetchable memory behind bridge: 00000000ce000000-00000000dfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0
ExtTag- RBE-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency
L0s <256ns, L1 <4us
ClockPM- Surprise- LLActRep+ BwNot- ASPMOptComp-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+
BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
Slot #32, PowerLimit 10.000W; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet+ LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee0f00c Data: 41a1
Capabilities: [90] Subsystem: Holco Enterprise Co, Ltd/Shuttle
Computer Device 2005
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed+ WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
Status: NegoPending- InProgress-
VC1: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable- ID=0 ArbSelect=Fixed TC/VC=00
Status: NegoPending- InProgress-
Capabilities: [180 v1] Root Complex Link
Desc: PortNumber=01 ComponentID=00 EltType=Config
Link0: Desc: TargetPort=00 TargetComponent=00 AssocRCRB-
LinkType=MemMapped LinkValid+
Addr: 00000000fed1c001
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.1 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express
Port 2 (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 25
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fea00000-feafffff
Prefetchable memory behind bridge: 0000000080000000-00000000801fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0
ExtTag- RBE-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #2, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency
L0s <256ns, L1 <4us
ClockPM- Surprise- LLActRep+ BwNot- ASPMOptComp-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+
BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
Slot #33, PowerLimit 10.000W; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet+ LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee0f00c Data: 41c1
Capabilities: [90] Subsystem: Holco Enterprise Co, Ltd/Shuttle
Computer Device 2005
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed+ WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
Status: NegoPending- InProgress-
VC1: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable- ID=0 ArbSelect=Fixed TC/VC=00
Status: NegoPending- InProgress-
Capabilities: [180 v1] Root Complex Link
Desc: PortNumber=02 ComponentID=00 EltType=Config
Link0: Desc: TargetPort=00 TargetComponent=00 AssocRCRB-
LinkType=MemMapped LinkValid+
Addr: 00000000fed1c001
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.3 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express
Port 4 (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin D routed to IRQ 26
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: feb00000-febfffff
Prefetchable memory behind bridge: 0000000080200000-00000000803fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0
ExtTag- RBE-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #4, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency
L0s <256ns, L1 <4us
ClockPM- Surprise- LLActRep+ BwNot- ASPMOptComp-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+
BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
Slot #35, PowerLimit 10.000W; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet- LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee0f00c Data: 41e1
Capabilities: [90] Subsystem: Holco Enterprise Co, Ltd/Shuttle
Computer Device 2005
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed+ WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
Status: NegoPending- InProgress-
VC1: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable- ID=0 ArbSelect=Fixed TC/VC=00
Status: NegoPending- InProgress-
Capabilities: [180 v1] Root Complex Link
Desc: PortNumber=04 ComponentID=00 EltType=Config
Link0: Desc: TargetPort=00 TargetComponent=00 AssocRCRB-
LinkType=MemMapped LinkValid+
Addr: 00000000fed1c001
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1d.0 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI
Controller #1 (rev 02) (prog-if 00 [UHCI])
Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device 2005
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at bc00 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci_hcd
00:1d.1 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI
Controller #2 (rev 02) (prog-if 00 [UHCI])
Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device 2005
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at b880 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci_hcd
00:1d.2 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI
Controller #3 (rev 02) (prog-if 00 [UHCI])
Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device 2005
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at b800 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci_hcd
00:1d.3 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI
Controller #4 (rev 02) (prog-if 00 [UHCI])
Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device 2005
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 16
Region 4: I/O ports at b480 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci_hcd
00:1d.7 USB controller: Intel Corporation NM10/ICH7 Family USB2 EHCI
Controller (rev 02) (prog-if 20 [EHCI])
Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device 2005
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at fcffbc00 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Debug port: BAR=1 offset=00a0
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
(prog-if 01 [Subtractive decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=04, subordinate=04, sec-latency=32
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Subsystem: Holco Enterprise Co, Ltd/Shuttle
Computer Device 2005
00:1f.0 ISA bridge: Intel Corporation NM10 Family LPC Controller (rev 02)
Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device 2005
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: [e0] Vendor Specific Information: Len=0c <?>
Kernel driver in use: lpc_ich
Kernel modules: lpc_ich
00:1f.2 IDE interface: Intel Corporation NM10/ICH7 Family SATA
Controller [IDE mode] (rev 02) (prog-if 8a [Master SecP PriP])
Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device 2005
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374
Region 4: I/O ports at ff90 [size=16]
Region 5: Memory at 80400000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [70] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: ata_piix
Kernel modules: ata_piix, pata_acpi, ata_generic
00:1f.3 SMBus: Intel Corporation NM10/ICH7 Family SMBus Controller (rev 02)
Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device 2005
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at 0400 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c_i801
01:00.0 VGA compatible controller: NVIDIA Corporation GT218 [ION] (rev
a2) (prog-if 00 [VGA controller])
Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device 4003
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 28
Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at ce000000 (64-bit, prefetchable) [size=32M]
Region 5: I/O ports at cc00 [size=128]
Expansion ROM at 000c0000 [disabled] [size=128K]
Capabilities: [60] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [68] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee0f00c Data: 4162
Capabilities: [78] Express (v2) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 <64us
ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset- SlotPowerLimit 10.000W
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Exit Latency
L0s <256ns, L1 <4us
ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp-
LnkCtl: ASPM Disabled; RCB 128 bytes Disabled- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive-
BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Not Supported, TimeoutDis+, LTR-, OBFF
Not Supported
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-,
EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
Capabilities: [b4] Vendor Specific Information: Len=14 <?>
Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
Status: NegoPending- InProgress-
Capabilities: [128 v1] Power Budgeting <?>
Capabilities: [600 v1] Vendor Specific Information: ID=0001 Rev=1 Len=024 <?>
Kernel driver in use: nouveau
Kernel modules: nouveau
01:00.1 Audio device: NVIDIA Corporation High Definition Audio
Controller (rev a1)
Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device 4003
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at fe97c000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [60] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [78] Express (v2) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1 <64us
ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset- SlotPowerLimit 10.000W
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Exit Latency
L0s <256ns, L1 <1us
ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp-
LnkCtl: ASPM L0s L1 Enabled; RCB 128 bytes Disabled- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive-
BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Not Supported, TimeoutDis+, LTR-, OBFF
Not Supported
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled
LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-,
EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
02:00.0 System peripheral: JMicron Technology Corp. SD/MMC Host
Controller (rev 80)
Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device 2005
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 18
Region 0: Memory at feaffc00 (32-bit, non-prefetchable) [size=256]
Capabilities: [a4] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [80] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- SlotPowerLimit 0.000W
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency
L0s unlimited, L1 unlimited
ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive-
BWMgmt- ABWMgmt-
Capabilities: [94] MSI: Enable- Count=1/1 Maskable- 64bit-
Address: fffffffc Data: 0000
Kernel driver in use: sdhci-pci
Kernel modules: sdhci_pci
02:00.2 SD Host controller: JMicron Technology Corp. Standard SD Host
Controller (rev 80) (prog-if 01)
Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device 2005
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 18
Region 0: Memory at feaff800 (32-bit, non-prefetchable) [size=256]
Capabilities: [a4] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [80] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- SlotPowerLimit 0.000W
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency
L0s unlimited, L1 unlimited
ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive-
BWMgmt- ABWMgmt-
Capabilities: [94] MSI: Enable- Count=1/1 Maskable- 64bit-
Address: fffffffc Data: 0000
Kernel modules: sdhci_pci
02:00.3 System peripheral: JMicron Technology Corp. MS Host Controller (rev 80)
Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device 2005
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 18
Region 0: Memory at feaff400 (32-bit, non-prefetchable) [size=256]
Capabilities: [a4] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [80] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- SlotPowerLimit 0.000W
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency
L0s unlimited, L1 unlimited
ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive-
BWMgmt- ABWMgmt-
Capabilities: [94] MSI: Enable- Count=1/1 Maskable- 64bit-
Address: fffffffc Data: 0000
Kernel driver in use: jmb38x_ms
Kernel modules: jmb38x_ms
02:00.5 Ethernet controller: JMicron Technology Corp. JMC250 PCI
Express Gigabit Ethernet Controller (rev 03)
Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device 2005
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at feaf4000 (32-bit, non-prefetchable) [size=16K]
Region 2: I/O ports at dc00 [size=128]
Region 3: I/O ports at d800 [size=256]
Capabilities: [68] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] Express (v1) Legacy Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency
L0s <64ns, L1 <1us
ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive-
BWMgmt- ABWMgmt-
Capabilities: [40] MSI-X: Enable- Count=8 Masked-
Vector table: BAR=0 offset=00002000
PBA: BAR=0 offset=00003000
Capabilities: [70] MSI: Enable- Count=1/8 Maskable+ 64bit+
Address: 0000000000000000 Data: 0000
Masking: 00000000 Pending: 00000000
Kernel driver in use: jme
Kernel modules: jme
03:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8188CE
802.11b/g/n WiFi Adapter (rev 01)
Subsystem: Realtek Semiconductor Co., Ltd. RTL8188CE 802.11b/g/n WiFi Adapter
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 19
Region 0: I/O ports at e800 [size=256]
Region 2: Memory at febfc000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [40] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [70] Express (v2) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- SlotPowerLimit 10.000W
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency
L0s <512ns, L1 <64us
ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp-
LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- CommClk+
ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive-
BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Not Supported, TimeoutDis+, LTR-, OBFF
Not Supported
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis+, LTR-, OBFF Disabled
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-,
EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF-
MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF-
MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+
MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
Capabilities: [140 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
Status: NegoPending- InProgress-
Capabilities: [160 v1] Device Serial Number 02-91-41-ff-af-4c-e0-10
Kernel driver in use: rtl8192ce
Kernel modules: rtl8192ce
$ dmesg
[ 0.000000] Linux version 4.9.5-1-ARCH (builduser@tobias) (gcc
version 6.3.1 20170109 (GCC) ) #1 SMP PREEMPT Fri Jan 20 12:11:50 CET
2017
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux
root=UUID=399040bd-474e-4c19-84b5-ae6235771846 rw quiet
[ 0.000000] x86/fpu: Legacy x87 FPU detected.
[ 0.000000] x86/fpu: Using 'eager' FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ffaffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007ffb0000-0x000000007ffbdfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000007ffbe000-0x000000007ffeffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000007fff0000-0x000000007fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.6 present.
[ 0.000000] DMI: Standard XS35/B10IE01, BIOS 080015 06/23/2011
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x7ffb0 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-D3FFF write-protect
[ 0.000000] D4000-DFFFF uncachable
[ 0.000000] E0000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f]
mapped at [ffff8800000ff780]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[ 0.000000] BRK [0x01d56000, 0x01d56fff] PGTABLE
[ 0.000000] BRK [0x01d57000, 0x01d57fff] PGTABLE
[ 0.000000] BRK [0x01d58000, 0x01d58fff] PGTABLE
[ 0.000000] BRK [0x01d59000, 0x01d59fff] PGTABLE
[ 0.000000] BRK [0x01d5a000, 0x01d5afff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x374c2000-0x37a58fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F9ED0 000024 (v02 ACPIAM)
[ 0.000000] ACPI: XSDT 0x000000007FFB0100 000054 (v01 Shuttl
Shuttle 20110623 MSFT 00000097)
[ 0.000000] ACPI: FACP 0x000000007FFB0290 0000F4 (v04 062311
FACP1651 20110623 MSFT 00000097)
[ 0.000000] ACPI: DSDT 0x000000007FFB05C0 006645 (v02 XS35V
XS35V10 00000200 INTL 20051117)
[ 0.000000] ACPI: FACS 0x000000007FFBE000 000040
[ 0.000000] ACPI: FACS 0x000000007FFBE000 000040
[ 0.000000] ACPI: APIC 0x000000007FFB0390 00006C (v02 062311
APIC1651 20110623 MSFT 00000097)
[ 0.000000] ACPI: MCFG 0x000000007FFB0400 00003C (v01 062311
OEMMCFG 20110623 MSFT 00000097)
[ 0.000000] ACPI: SLIC 0x000000007FFB0440 000176 (v01 Shuttl
Shuttle 20110623 MSFT 00000097)
[ 0.000000] ACPI: OEMB 0x000000007FFBE040 000072 (v01 062311
OEMB1651 20110623 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x000000007FFBA5C0 000038 (v01 062311
OEMHPET 20110623 MSFT 00000097)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000007ffaffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x7ffab000-0x7ffaffff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x000000007ffaffff]
[ 0.000000] Normal empty
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000007ffaffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000007ffaffff]
[ 0.000000] On node 0 totalpages: 524110
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 8127 pages used for memmap
[ 0.000000] DMA32 zone: 520112 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] e820: [mem 0x80000000-0xfedfffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff
max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128
nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] percpu: Embedded 35 pages/cpu @ffff88007fc00000 s103448
r8192 d31720 u524288
[ 0.000000] pcpu-alloc: s103448 r8192 d31720 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on.
Total pages: 515898
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux
root=UUID=399040bd-474e-4c19-84b5-ae6235771846 rw quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 2043544K/2096440K available (6198K kernel code,
1069K rwdata, 1940K rodata, 1276K init, 1032K bss, 52896K reserved, 0K
cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[ 0.000000] NR_IRQS:8448 nr_irqs:456 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles:
0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 1795.383 MHz processor
[ 0.003353] Calibrating delay loop (skipped), value calculated
using timer frequency.. 3592.38 BogoMIPS (lpj=5984610)
[ 0.003360] pid_max: default: 32768 minimum: 301
[ 0.003398] ACPI: Core revision 20160831
[ 0.019273] ACPI: 1 ACPI AML tables successfully acquired and loaded
[ 0.019367] Security Framework initialized
[ 0.019371] Yama: becoming mindful.
[ 0.019715] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.021447] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.022254] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.022265] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.022929] CPU: Physical Processor ID: 0
[ 0.022933] CPU: Processor Core ID: 0
[ 0.022936] mce: CPU supports 5 MCE banks
[ 0.022947] CPU0: Thermal monitoring enabled (TM1)
[ 0.022954] process: using mwait in idle threads
[ 0.022962] Last level iTLB entries: 4KB 32, 2MB 0, 4MB 0
[ 0.022964] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 8, 1GB 0
[ 0.023519] Freeing SMP alternatives memory: 24K (ffffffff81c4c000
- ffffffff81c52000)
[ 0.026683] ftrace: allocating 24600 entries in 97 pages
[ 0.043559] smpboot: Max logical packages: 2
[ 0.043992] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.079999] smpboot: CPU0: Intel(R) Atom(TM) CPU D525 @ 1.80GHz
(family: 0x6, model: 0x1c, stepping: 0xa)
[ 0.079999] Performance Events: PEBS fmt0+, Atom events, 8-deep
LBR, Intel PMU driver.
[ 0.079999] ... version: 3
[ 0.079999] ... bit width: 40
[ 0.079999] ... generic registers: 2
[ 0.079999] ... value mask: 000000ffffffffff
[ 0.079999] ... max period: 000000007fffffff
[ 0.079999] ... fixed-purpose events: 3
[ 0.079999] ... event mask: 0000000700000003
[ 0.110238] NMI watchdog: enabled on all CPUs, permanently consumes
one hw-PMU counter.
[ 0.143383] x86: Booting SMP configuration:
[ 0.143387] .... node #0, CPUs: #1
[ 0.006666] Disabled fast string operations
[ 0.253376] #2
[ 0.006666] Disabled fast string operations
[ 0.363382] #3
[ 0.006666] Disabled fast string operations
[ 0.448688] TSC synchronization [CPU#0 -> CPU#3]:
[ 0.448691] Measured 54 cycles TSC warp between CPUs, turning off TSC clock.
[ 0.448701] tsc: Marking TSC unstable due to check_tsc_sync_source failed
[ 0.448803] x86: Booted up 1 node, 4 CPUs
[ 0.448803] smpboot: Total of 4 processors activated (14369.93 BogoMIPS)
[ 0.450655] devtmpfs: initialized
[ 0.450655] x86/mm: Memory block size: 128MB
[ 0.459784] PM: Registering ACPI NVS region [mem
0x7ffbe000-0x7ffeffff] (204800 bytes)
[ 0.460105] clocksource: jiffies: mask: 0xffffffff max_cycles:
0xffffffff, max_idle_ns: 6370867519511994 ns
[ 0.460219] pinctrl core: initialized pinctrl subsystem
[ 0.460315] RTC time: 19:08:56, date: 02/10/17
[ 0.460573] NET: Registered protocol family 16
[ 0.470016] cpuidle: using governor ladder
[ 0.483348] cpuidle: using governor menu
[ 0.483411] ACPI: bus type PCI registered
[ 0.483415] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.483592] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem
0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.483597] PCI: not using MMCONFIG
[ 0.483599] PCI: Using configuration type 1 for base access
[ 0.483755] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.483757] mtrr: probably your BIOS does not setup all CPUs.
[ 0.483758] mtrr: corrected configuration.
[ 0.496770] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.496882] ACPI: Added _OSI(Module Device)
[ 0.496886] ACPI: Added _OSI(Processor Device)
[ 0.496888] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.496891] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.497213] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.503049] ACPI Error: No handler for Region [ECRM]
(ffff88007d09b360) [EmbeddedControl] (20160831/evregion-166)
[ 0.503074] ACPI Error: Region EmbeddedControl (ID=3) has no
handler (20160831/exfldio-299)
[ 0.503092] ACPI Error: Method parse/execution failed
[\_SB.PCI0.SBRG.EC0._REG] (Node ffff88007d09d280), AE_NOT_EXIST
(20160831/psparse-543)
[ 0.504921] ACPI : EC: EC started
[ 0.983443] ACPI: \_SB_.PCI0.SBRG.EC0_: Used as first EC
[ 0.983448] ACPI: \_SB_.PCI0.SBRG.EC0_: GPE=0x1d,
EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.983452] ACPI: \_SB_.PCI0.SBRG.EC0_: Used as boot DSDT EC to
handle transactions
[ 0.983453] ACPI: Interpreter enabled
[ 0.983499] ACPI: (supports S0 S3 S4 S5)
[ 0.983502] ACPI: Using IOAPIC for interrupt routing
[ 0.983589] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem
0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.985989] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved
in ACPI motherboard resources
[ 0.986033] PCI: Using host bridge windows from ACPI; if necessary,
use "pci=nocrs" and report a bug
[ 0.999129] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.999143] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM
ClockPM Segments MSI]
[ 0.999154] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.999771] PCI host bridge to bus 0000:00
[ 0.999778] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.999782] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.999786] pci_bus 0000:00: root bus resource [mem
0x000a0000-0x000bffff window]
[ 0.999790] pci_bus 0000:00: root bus resource [mem
0x000d0000-0x000dffff window]
[ 0.999794] pci_bus 0000:00: root bus resource [mem
0x80000000-0xdfffffff window]
[ 0.999798] pci_bus 0000:00: root bus resource [mem
0xf0000000-0xfed8ffff window]
[ 0.999802] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.999818] pci 0000:00:00.0: [8086:a000] type 00 class 0x060000
[ 1.000097] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
[ 1.000119] pci 0000:00:1b.0: reg 0x10: [mem 0xfcffc000-0xfcffffff 64bit]
[ 1.000204] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 1.000328] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 1.000442] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
[ 1.000529] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 1.000644] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 1.000760] pci 0000:00:1c.1: [8086:27d2] type 01 class 0x060400
[ 1.000844] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 1.000960] pci 0000:00:1c.1: System wakeup disabled by ACPI
[ 1.001073] pci 0000:00:1c.3: [8086:27d6] type 01 class 0x060400
[ 1.001157] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 1.001410] pci 0000:00:1c.3: System wakeup disabled by ACPI
[ 1.001526] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
[ 1.001569] pci 0000:00:1d.0: reg 0x20: [io 0xbc00-0xbc1f]
[ 1.001747] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 1.001862] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
[ 1.001905] pci 0000:00:1d.1: reg 0x20: [io 0xb880-0xb89f]
[ 1.002084] pci 0000:00:1d.1: System wakeup disabled by ACPI
[ 1.002196] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
[ 1.002239] pci 0000:00:1d.2: reg 0x20: [io 0xb800-0xb81f]
[ 1.002411] pci 0000:00:1d.2: System wakeup disabled by ACPI
[ 1.002521] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
[ 1.002564] pci 0000:00:1d.3: reg 0x20: [io 0xb480-0xb49f]
[ 1.002741] pci 0000:00:1d.3: System wakeup disabled by ACPI
[ 1.002859] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
[ 1.002880] pci 0000:00:1d.7: reg 0x10: [mem 0xfcffbc00-0xfcffbfff]
[ 1.002969] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 1.003079] pci 0000:00:1d.7: System wakeup disabled by ACPI
[ 1.003190] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[ 1.003375] pci 0000:00:1e.0: System wakeup disabled by ACPI
[ 1.003493] pci 0000:00:1f.0: [8086:27bc] type 00 class 0x060100
[ 1.003579] pci 0000:00:1f.0: [Firmware Bug]: TigerPoint LPC.BM_STS cleared
[ 1.003805] pci 0000:00:1f.2: [8086:27c0] type 00 class 0x01018a
[ 1.003821] pci 0000:00:1f.2: reg 0x10: [io 0x0000-0x0007]
[ 1.003831] pci 0000:00:1f.2: reg 0x14: [io 0x0000-0x0003]
[ 1.003841] pci 0000:00:1f.2: reg 0x18: [io 0x0000-0x0007]
[ 1.003850] pci 0000:00:1f.2: reg 0x1c: [io 0x0000-0x0003]
[ 1.003860] pci 0000:00:1f.2: reg 0x20: [io 0xff90-0xff9f]
[ 1.003870] pci 0000:00:1f.2: reg 0x24: [mem 0x0000fc00-0x0000ffff]
[ 1.003883] pci 0000:00:1f.2: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 1.003886] pci 0000:00:1f.2: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 1.003890] pci 0000:00:1f.2: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 1.003893] pci 0000:00:1f.2: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 1.003926] pci 0000:00:1f.2: PME# supported from D3hot
[ 1.004132] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
[ 1.004185] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f]
[ 1.004496] pci 0000:01:00.0: [10de:0a6f] type 00 class 0x030000
[ 1.004520] pci 0000:01:00.0: reg 0x10: [mem 0xfd000000-0xfdffffff]
[ 1.004538] pci 0000:01:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff
64bit pref]
[ 1.004557] pci 0000:01:00.0: reg 0x1c: [mem 0xce000000-0xcfffffff
64bit pref]
[ 1.004570] pci 0000:01:00.0: reg 0x24: [io 0xcc00-0xcc7f]
[ 1.004583] pci 0000:01:00.0: reg 0x30: [mem 0xfe980000-0xfe9fffff pref]
[ 1.004785] pci 0000:01:00.1: [10de:0be3] type 00 class 0x040300
[ 1.004807] pci 0000:01:00.1: reg 0x10: [mem 0xfe97c000-0xfe97ffff]
[ 1.013374] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 1.013380] pci 0000:00:1c.0: bridge window [io 0xc000-0xcfff]
[ 1.013386] pci 0000:00:1c.0: bridge window [mem 0xfd000000-0xfe9fffff]
[ 1.013394] pci 0000:00:1c.0: bridge window [mem
0xce000000-0xdfffffff 64bit pref]
[ 1.013548] pci 0000:02:00.0: [197b:2382] type 00 class 0x088000
[ 1.013576] pci 0000:02:00.0: reg 0x10: [mem 0xfeaffc00-0xfeaffcff]
[ 1.013879] pci 0000:02:00.2: [197b:2381] type 00 class 0x080501
[ 1.013906] pci 0000:02:00.2: reg 0x10: [mem 0xfeaff800-0xfeaff8ff]
[ 1.014185] pci 0000:02:00.3: [197b:2383] type 00 class 0x088000
[ 1.014212] pci 0000:02:00.3: reg 0x10: [mem 0xfeaff400-0xfeaff4ff]
[ 1.014493] pci 0000:02:00.5: [197b:0250] type 00 class 0x020000
[ 1.014520] pci 0000:02:00.5: reg 0x10: [mem 0xfeaf4000-0xfeaf7fff]
[ 1.014547] pci 0000:02:00.5: reg 0x18: [io 0xdc00-0xdc7f]
[ 1.014563] pci 0000:02:00.5: reg 0x1c: [io 0xd800-0xd8ff]
[ 1.014687] pci 0000:02:00.5: PME# supported from D0 D3hot D3cold
[ 1.014757] pci 0000:02:00.5: System wakeup disabled by ACPI
[ 1.023368] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 1.023375] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff]
[ 1.023380] pci 0000:00:1c.1: bridge window [mem 0xfea00000-0xfeafffff]
[ 1.023524] pci 0000:03:00.0: [10ec:8176] type 00 class 0x028000
[ 1.023550] pci 0000:03:00.0: reg 0x10: [io 0xe800-0xe8ff]
[ 1.023585] pci 0000:03:00.0: reg 0x18: [mem 0xfebfc000-0xfebfffff 64bit]
[ 1.023713] pci 0000:03:00.0: supports D1 D2
[ 1.023717] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.033366] pci 0000:00:1c.3: PCI bridge to [bus 03]
[ 1.033372] pci 0000:00:1c.3: bridge window [io 0xe000-0xefff]
[ 1.033378] pci 0000:00:1c.3: bridge window [mem 0xfeb00000-0xfebfffff]
[ 1.033511] pci 0000:00:1e.0: PCI bridge to [bus 04] (subtractive decode)
[ 1.033524] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7
window] (subtractive decode)
[ 1.033528] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff
window] (subtractive decode)
[ 1.033532] pci 0000:00:1e.0: bridge window [mem
0x000a0000-0x000bffff window] (subtractive decode)
[ 1.033536] pci 0000:00:1e.0: bridge window [mem
0x000d0000-0x000dffff window] (subtractive decode)
[ 1.033540] pci 0000:00:1e.0: bridge window [mem
0x80000000-0xdfffffff window] (subtractive decode)
[ 1.033544] pci 0000:00:1e.0: bridge window [mem
0xf0000000-0xfed8ffff window] (subtractive decode)
[ 1.035190] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 *10 11 12 14 15)
[ 1.035348] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 *11 12 14 15)
[ 1.035516] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 *7 10 11 12 14 15)
[ 1.035671] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 7 10 11 12 14 15)
[ 1.035825] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12
14 15) *0, disabled.
[ 1.035980] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12
14 15) *0, disabled.
[ 1.036135] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12
14 15) *0, disabled.
[ 1.036290] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 7 10 11 12 14 15)
[ 1.036544] ACPI: Enabled 3 GPEs in block 00 to 1F
[ 1.036739] ACPI : EC: event unblocked
[ 1.036750] ACPI: \_SB_.PCI0.SBRG.EC0_: GPE=0x1d,
EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 1.036754] ACPI: \_SB_.PCI0.SBRG.EC0_: Used as boot DSDT EC to
handle transactions and events
[ 1.037063] vgaarb: setting as boot device: PCI:0000:01:00.0
[ 1.037063] vgaarb: device added:
PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 1.037063] vgaarb: loaded
[ 1.037063] vgaarb: bridge control possible 0000:01:00.0
[ 1.037063] PCI: Using ACPI for IRQ routing
[ 1.041104] PCI: pci_cache_line_size set to 64 bytes
[ 1.041189] pci 0000:00:1f.2: can't claim BAR 5 [mem
0x0000fc00-0x0000ffff]: no compatible bridge window
[ 1.041197] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
[ 1.041201] e820: reserve RAM buffer [mem 0x7ffb0000-0x7fffffff]
[ 1.041506] NetLabel: Initializing
[ 1.041508] NetLabel: domain hash size = 128
[ 1.041510] NetLabel: protocols = UNLABELED CIPSOv4
[ 1.041542] NetLabel: unlabeled traffic allowed by default
[ 1.043406] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 1.043412] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 1.043420] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 1.046720] clocksource: Switched to clocksource hpet
[ 1.069286] VFS: Disk quotas dquot_6.6.0
[ 1.069342] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.069574] pnp: PnP ACPI init
[ 1.069778] system 00:00: [mem 0xfed14000-0xfed19fff] has been reserved
[ 1.069783] system 00:00: [mem 0xfed90000-0xfed93fff] has been reserved
[ 1.069793] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 1.069977] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 1.070161] pnp 00:02: Plug and Play ACPI device, IDs PNP0303
PNP030b (active)
[ 1.070343] pnp 00:03: Plug and Play ACPI device, IDs PNP0f03
PNP0f13 (active)
[ 1.070693] system 00:04: [io 0x04d0-0x04d1] has been reserved
[ 1.070698] system 00:04: [io 0x0800-0x087f] has been reserved
[ 1.070703] system 00:04: [io 0x0480-0x04bf] has been reserved
[ 1.070709] system 00:04: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 1.070713] system 00:04: [mem 0xfed20000-0xfed8ffff] has been reserved
[ 1.070722] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.071004] system 00:05: [mem 0xffc00000-0xffefffff] has been reserved
[ 1.071012] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.071335] system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 1.071340] system 00:06: [mem 0xfee00000-0xfee00fff] has been reserved
[ 1.071349] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.071528] system 00:07: [mem 0xe0000000-0xefffffff] has been reserved
[ 1.071537] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.072026] system 00:08: [mem 0x00000000-0x0009ffff] could not be reserved
[ 1.072032] system 00:08: [mem 0x000c0000-0x000cffff] could not be reserved
[ 1.072037] system 00:08: [mem 0x000e0000-0x000fffff] could not be reserved
[ 1.072041] system 00:08: [mem 0x00100000-0x7fffffff] could not be reserved
[ 1.072046] system 00:08: [mem 0xfed90000-0xffffffff] could not be reserved
[ 1.072054] system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 1.072404] pnp: PnP ACPI: found 9 devices
[ 1.083644] clocksource: acpi_pm: mask: 0xffffff max_cycles:
0xffffff, max_idle_ns: 2085701024 ns
[ 1.083695] pci 0000:00:1c.1: bridge window [mem
0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
add_align 100000
[ 1.083707] pci 0000:00:1c.3: bridge window [mem
0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
add_align 100000
[ 1.083729] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff
64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 1.083734] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x002fffff
64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 1.083739] pci 0000:00:1c.3: res[15]=[mem 0x00100000-0x000fffff
64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 1.083744] pci 0000:00:1c.3: res[15]=[mem 0x00100000-0x002fffff
64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 1.083760] pci 0000:00:1c.1: BAR 15: assigned [mem
0x80000000-0x801fffff 64bit pref]
[ 1.085003] pci 0000:00:1c.3: BAR 15: assigned [mem
0x80200000-0x803fffff 64bit pref]
[ 1.085009] pci 0000:00:1f.2: BAR 5: assigned [mem 0x80400000-0x804003ff]
[ 1.085021] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 1.085026] pci 0000:00:1c.0: bridge window [io 0xc000-0xcfff]
[ 1.085033] pci 0000:00:1c.0: bridge window [mem 0xfd000000-0xfe9fffff]
[ 1.085038] pci 0000:00:1c.0: bridge window [mem
0xce000000-0xdfffffff 64bit pref]
[ 1.085047] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 1.085052] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff]
[ 1.085058] pci 0000:00:1c.1: bridge window [mem 0xfea00000-0xfeafffff]
[ 1.085064] pci 0000:00:1c.1: bridge window [mem
0x80000000-0x801fffff 64bit pref]
[ 1.085071] pci 0000:00:1c.3: PCI bridge to [bus 03]
[ 1.085075] pci 0000:00:1c.3: bridge window [io 0xe000-0xefff]
[ 1.085082] pci 0000:00:1c.3: bridge window [mem 0xfeb00000-0xfebfffff]
[ 1.085087] pci 0000:00:1c.3: bridge window [mem
0x80200000-0x803fffff 64bit pref]
[ 1.085096] pci 0000:00:1e.0: PCI bridge to [bus 04]
[ 1.085110] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 1.085114] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 1.085118] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 1.085122] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window]
[ 1.085126] pci_bus 0000:00: resource 8 [mem 0x80000000-0xdfffffff window]
[ 1.085130] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfed8ffff window]
[ 1.085134] pci_bus 0000:01: resource 0 [io 0xc000-0xcfff]
[ 1.085138] pci_bus 0000:01: resource 1 [mem 0xfd000000-0xfe9fffff]
[ 1.085142] pci_bus 0000:01: resource 2 [mem 0xce000000-0xdfffffff
64bit pref]
[ 1.085146] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
[ 1.085150] pci_bus 0000:02: resource 1 [mem 0xfea00000-0xfeafffff]
[ 1.085154] pci_bus 0000:02: resource 2 [mem 0x80000000-0x801fffff
64bit pref]
[ 1.085158] pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
[ 1.085162] pci_bus 0000:03: resource 1 [mem 0xfeb00000-0xfebfffff]
[ 1.085166] pci_bus 0000:03: resource 2 [mem 0x80200000-0x803fffff
64bit pref]
[ 1.085170] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7 window]
[ 1.085174] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff window]
[ 1.085178] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff window]
[ 1.085182] pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000dffff window]
[ 1.085186] pci_bus 0000:04: resource 8 [mem 0x80000000-0xdfffffff window]
[ 1.085190] pci_bus 0000:04: resource 9 [mem 0xf0000000-0xfed8ffff window]
[ 1.085398] NET: Registered protocol family 2
[ 1.085824] TCP established hash table entries: 16384 (order: 5,
131072 bytes)
[ 1.085951] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[ 1.086083] TCP: Hash tables configured (established 16384 bind 16384)
[ 1.086183] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[ 1.086215] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[ 1.086381] NET: Registered protocol family 1
[ 1.087755] pci 0000:01:00.0: Video device with shadowed ROM at
[mem 0x000c0000-0x000dffff]
[ 1.087792] PCI: CLS 32 bytes, default 64
[ 1.087949] Unpacking initramfs...
[ 1.302264] Freeing initrd memory: 5724K (ffff8800374c2000 -
ffff880037a59000)
[ 1.302399] clocksource: tsc: mask: 0xffffffffffffffff max_cycles:
0x19e12014cc1, max_idle_ns: 440795292848 ns
[ 1.302543] Scanning for low memory corruption every 60 seconds
[ 1.303465] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 1.304311] Initialise system trusted keyrings
[ 1.304581] workingset: timestamp_bits=40 max_order=19 bucket_order=0
[ 1.310230] zbud: loaded
[ 1.311551] Key type asymmetric registered
[ 1.311683] Block layer SCSI generic (bsg) driver version 0.4
loaded (major 249)
[ 1.311792] io scheduler noop registered
[ 1.311795] io scheduler deadline registered
[ 1.311818] io scheduler cfq registered (default)
[ 1.313022] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.313039] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.313074] vesafb: mode is 640x480x32, linelength=2560, pages=0
[ 1.313076] vesafb: scrolling: redraw
[ 1.313080] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 1.313108] vesafb: framebuffer at 0xcf000000, mapped to
0xffffc90000600000, using 1216k, total 1216k
[ 1.371153] Console: switching to colour frame buffer device 80x30
[ 1.428816] fb0: VESA VGA frame buffer device
[ 1.428876] intel_idle: MWAIT substates: 0x10
[ 1.428879] intel_idle: v0.4.1 model 0x1C
[ 1.429076] intel_idle: lapic_timer_reliable_states 0x2
[ 1.429459] GHES: HEST is not enabled!
[ 1.429688] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.430970] Linux agpgart interface v0.103
[ 1.431895] rtc_cmos 00:01: RTC can wake from S4
[ 1.432152] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 1.432193] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes
nvram, hpet irqs
[ 1.432329] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.433013] NET: Registered protocol family 10
[ 1.433701] NET: Registered protocol family 17
[ 1.434306] microcode: sig=0x106ca, pf=0x8, revision=0x107
[ 1.434484] microcode: Microcode Update Driver: v2.01
<tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 1.434912] registered taskstats version 1
[ 1.434935] Loading compiled-in X.509 certificates
[ 1.434983] zswap: loaded using pool lzo/zbud
[ 1.435870] Magic number: 5:805:141
[ 1.435962] acpi device:12: hash matches
[ 1.436057] rtc_cmos 00:01: setting system clock to 2017-02-10
19:08:57 UTC (1486753737)
[ 1.436158] PM: Hibernation image not present or could not be loaded.
[ 1.439940] Freeing unused kernel memory: 1276K (ffffffff81b0d000 -
ffffffff81c4c000)
[ 1.439945] Write protecting the kernel read-only data: 10240k
[ 1.441897] Freeing unused kernel memory: 1980K (ffff880001611000 -
ffff880001800000)
[ 1.442817] Freeing unused kernel memory: 108K (ffff8800019e5000 -
ffff880001a00000)
[ 1.469252] random: systemd-tmpfile: uninitialized urandom read (16
bytes read)
[ 1.475758] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.475946] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.478858] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.478930] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.493809] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.493869] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.493896] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.494769] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.494866] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.581507] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M]
at 0x60,0x64 irq 1,12
[ 1.584238] i8042: Detected active multiplexing controller, rev 1.0
[ 1.585086] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.585266] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 1.585472] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 1.585648] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 1.585657] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 1.603178] sdhci: Secure Digital Host Controller Interface driver
[ 1.603181] sdhci: Copyright(c) Pierre Ossman
[ 1.604451] sdhci-pci 0000:02:00.0: SDHCI controller found
[197b:2382] (rev 80)
[ 1.609223] mmc0: SDHCI controller on PCI [0000:02:00.0] using ADMA
[ 1.609334] sdhci-pci 0000:02:00.2: SDHCI controller found
[197b:2381] (rev 80)
[ 1.609514] sdhci-pci 0000:02:00.2: Refusing to bind to secondary interface.
[ 1.610615] ACPI: bus type USB registered
[ 1.610759] usbcore: registered new interface driver usbfs
[ 1.610815] usbcore: registered new interface driver hub
[ 1.610930] usbcore: registered new device driver usb
[ 1.613153] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.614157] ehci-pci: EHCI PCI platform driver
[ 1.614518] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 1.614537] ehci-pci 0000:00:1d.7: new USB bus registered, assigned
bus number 1
[ 1.614559] ehci-pci 0000:00:1d.7: debug port 1
[ 1.618489] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
[ 1.618531] ehci-pci 0000:00:1d.7: irq 23, io mem 0xfcffbc00
[ 1.621710] SCSI subsystem initialized
[ 1.627795] libata version 3.00 loaded.
[ 1.633408] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.634363] hub 1-0:1.0: USB hub found
[ 1.634388] hub 1-0:1.0: 8 ports detected
[ 1.635090] ata_piix 0000:00:1f.2: version 2.13
[ 1.635107] ata_piix 0000:00:1f.2: enabling device (0005 -> 0007)
[ 1.635924] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 1.636592] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.639251] scsi host0: ata_piix
[ 1.639618] scsi host1: ata_piix
[ 1.639787] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xff90 irq 14
[ 1.639791] ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xff98 irq 15
[ 1.640225] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.640254] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned
bus number 2
[ 1.640272] uhci_hcd 0000:00:1d.0: detected 2 ports
[ 1.640310] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000bc00
[ 1.641127] hub 2-0:1.0: USB hub found
[ 1.641167] hub 2-0:1.0: 2 ports detected
[ 1.641949] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.641989] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned
bus number 3
[ 1.642007] uhci_hcd 0000:00:1d.1: detected 2 ports
[ 1.642068] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b880
[ 1.642883] hub 3-0:1.0: USB hub found
[ 1.642919] hub 3-0:1.0: 2 ports detected
[ 1.643768] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.643795] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned
bus number 4
[ 1.643815] uhci_hcd 0000:00:1d.2: detected 2 ports
[ 1.643851] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b800
[ 1.644692] hub 4-0:1.0: USB hub found
[ 1.644726] hub 4-0:1.0: 2 ports detected
[ 1.645511] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 1.645541] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned
bus number 5
[ 1.645560] uhci_hcd 0000:00:1d.3: detected 2 ports
[ 1.645621] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000b480
[ 1.646431] hub 5-0:1.0: USB hub found
[ 1.646469] hub 5-0:1.0: 2 ports detected
[ 1.695304] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input0
[ 1.802604] ata1.00: ATA-8: HGST HTS721010A9E630, JB0OA3B0, max UDMA/133
[ 1.802609] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.803510] ata2.01: NODEV after polling detection
[ 1.807358] ata1.00: configured for UDMA/133
[ 1.807815] scsi 0:0:0:0: Direct-Access ATA HGST
HTS721010A9 A3B0 PQ: 0 ANSI: 5
[ 1.823512] ata2.00: ATAPI: HL-DT-STDVDRAM GT32N, 1.00, max UDMA/100
[ 1.846849] ata2.00: configured for UDMA/100
[ 1.850212] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GT32N
1.00 PQ: 0 ANSI: 5
[ 1.871953] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks:
(1.00 TB/932 GiB)
[ 1.871962] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 1.872299] sd 0:0:0:0: [sda] Write Protect is off
[ 1.872308] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.872418] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 1.886316] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer
dvd-ram cd/rw xa/form2 cdda tray
[ 1.886321] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.887031] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.944130] sda: sda1 sda2 sda3 sda4
[ 1.945761] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.150035] usb 5-2: new full-speed USB device number 2 using uhci_hcd
[ 2.351049] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.359889] usbcore: registered new interface driver usbhid
[ 2.359892] usbhid: USB HID core driver
[ 2.362730] random: fast init done
[ 2.366335] logitech-djreceiver 0003:046D:C52B.0003:
hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on
usb-0000:00:1d.3-2/input2
[ 2.733502] EXT4-fs (sda1): mounted filesystem with ordered data
mode. Opts: (null)
[ 2.870056] input: Logitech K400 as
/devices/pci0000:00/0000:00:1d.3/usb5/5-2/5-2:1.2/0003:046D:C52B.0003/0003:046D:400E.0004/input/input5
[ 2.870205] logitech-hidpp-device 0003:046D:400E.0004:
input,hidraw1: USB HID v1.11 Keyboard [Logitech K400] on
usb-0000:00:1d.3-2:1
[ 3.789505] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 3.805779] systemd[1]: systemd 232 running in system mode. (+PAM
-AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP
+GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[ 3.806261] systemd[1]: Detected architecture x86-64.
[ 3.813099] systemd[1]: Set hostname to <stube>.
[ 4.276962] random: crng init done
[ 4.722249] systemd[1]: Created slice System Slice.
[ 4.722971] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 4.723139] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 4.723737] systemd[1]: Created slice User and Session Slice.
[ 4.765971] systemd[1]: Mounting POSIX Message Queue File System...
[ 4.766642] systemd[1]: Set up automount Arbitrary Executable File
Formats File System Automount Point.
[ 4.766881] systemd[1]: Reached target Slices.
[ 5.022975] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 5.023096] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 5.314742] EXT4-fs (sda1): re-mounted. Opts: data=ordered
[ 6.574332] systemd-journald[141]: Received request to flush
runtime journal from PID 1
[ 7.583508] input: Sleep Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input6
[ 7.583518] ACPI: Sleep Button [SLPB]
[ 7.583738] input: Power Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input7
[ 7.583745] ACPI: Power Button [PWRB]
[ 7.583945] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input8
[ 7.583952] ACPI: Power Button [PWRF]
[ 7.608859] wmi: Mapper loaded
[ 8.010852] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 8.185412] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 8.235898] ACPI Warning: SystemIO range
0x0000000000000828-0x000000000000082F conflicts with OpRegion
0x0000000000000800-0x000000000000083F (\PMS0) (20160831/utaddress-247)
[ 8.235914] ACPI Warning: SystemIO range
0x0000000000000828-0x000000000000082F conflicts with OpRegion
0x0000000000000800-0x000000000000087F (\_SB.PCI0.SBRG.EC0.PMIO)
(20160831/utaddress-247)
[ 8.235924] ACPI: If an ACPI driver is available for this device,
you should use it instead of the native driver
[ 8.236002] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 8.270253] thermal LNXTHERM:00: registered as thermal_zone0
[ 8.270259] ACPI: Thermal Zone [TZ00] (61 C)
[ 8.361327] FUJITSU Extended Socket Network Device Driver - version
1.1 - Copyright (c) 2015 FUJITSU LIMITED
[ 8.479031] input: PC Speaker as /devices/platform/pcspkr/input/input13
[ 8.579305] jme: JMicron JMC2XX ethernet driver version 1.0.8
[ 8.579374] jme 0000:02:00.5: can't disable ASPM; OS doesn't have
ASPM control
[ 8.580804] jme 0000:02:00.5 eth0: JMC250 Gigabit Ethernet
chiprev:23 pcirev:3 macaddr:80:ee:73:1f:ec:4a
[ 9.035897] iTCO_vendor_support: vendor-support=0
[ 9.041109] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 9.041213] iTCO_wdt: Found a NM10 TCO device (Version=2, TCOBASE=0x0860)
[ 9.041584] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 9.166142] intel_powerclamp: No package C-state available
[ 9.210946] intel_powerclamp: No package C-state available
[ 9.218659] gpio_ich: GPIO from 462 to 511 on gpio_ich
[ 9.308343] asus_wmi: Asus Management GUID not found
[ 9.319552] snd_hda_intel 0000:01:00.1: Disabling MSI
[ 9.319565] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[ 9.530612] jme 0000:02:00.5 enp2s0f5: renamed from eth0
[ 9.632884] mousedev: PS/2 mouse device common for all mice
[ 9.665305] [drm] Initialized
[ 9.935590] rtl8192ce: Using firmware rtlwifi/rtl8192cfwU.bin
[ 10.220647] checking generic (cf000000 130000) vs hw (d0000000 10000000)
[ 10.220652] checking generic (cf000000 130000) vs hw (ce000000 2000000)
[ 10.220654] fb: switching to nouveaufb from VESA VGA
[ 10.220728] Console: switching to colour dummy device 80x25
[ 10.222037] nouveau 0000:01:00.0: NVIDIA GT218 (0a8780b1)
[ 10.323932] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[ 10.324598] rtlwifi: rtlwifi: wireless switch is on
[ 10.332311] snd_hda_codec_idt hdaudioC0D0: autoconfig for
92HD81B1X5: line_outs=1 (0xd/0x0/0x0/0x0/0x0) type:speaker
[ 10.332318] snd_hda_codec_idt hdaudioC0D0: speaker_outs=0
(0x0/0x0/0x0/0x0/0x0)
[ 10.332322] snd_hda_codec_idt hdaudioC0D0: hp_outs=1 (0xb/0x0/0x0/0x0/0x0)
[ 10.332326] snd_hda_codec_idt hdaudioC0D0: mono: mono_out=0x0
[ 10.332328] snd_hda_codec_idt hdaudioC0D0: inputs:
[ 10.332333] snd_hda_codec_idt hdaudioC0D0: Internal Mic=0xc
[ 10.332337] snd_hda_codec_idt hdaudioC0D0: Mic=0xa
[ 10.372366] nouveau 0000:01:00.0: bios: version 70.18.64.00.0e
[ 10.374341] nouveau 0000:01:00.0: fb: 512 MiB DDR3
[ 10.428486] [TTM] Zone kernel: Available graphics memory: 1026328 kiB
[ 10.428489] [TTM] Initializing pool allocator
[ 10.428503] [TTM] Initializing DMA pool allocator
[ 10.428549] nouveau 0000:01:00.0: DRM: VRAM: 512 MiB
[ 10.428553] nouveau 0000:01:00.0: DRM: GART: 1048576 MiB
[ 10.428561] nouveau 0000:01:00.0: DRM: TMDS table version 2.0
[ 10.428565] nouveau 0000:01:00.0: DRM: DCB version 4.0
[ 10.428570] nouveau 0000:01:00.0: DRM: DCB outp 01: 02011300 00000000
[ 10.428575] nouveau 0000:01:00.0: DRM: DCB outp 02: 02022362 00020010
[ 10.428580] nouveau 0000:01:00.0: DRM: DCB conn 01: 00000100
[ 10.428583] nouveau 0000:01:00.0: DRM: DCB conn 02: 00001261
[ 10.456148] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 10.456152] [drm] Driver supports precise vblank timestamp query.
[ 10.484389] rtl8192ce 0000:03:00.0 wlp3s0: renamed from wlan0
[ 10.515448] nouveau 0000:01:00.0: DRM: MM: using COPY for buffer copies
[ 10.623104] nouveau 0000:01:00.0: DRM: allocated 1920x1080 fb:
0x70000, bo ffff880076137800
[ 10.623430] fbcon: nouveaufb (fb0) is primary device
[ 10.691367] Console: switching to colour frame buffer device 240x67
[ 10.693917] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
[ 10.720037] [drm] Initialized nouveau 1.3.1 20120801 for
0000:01:00.0 on minor 0
[ 11.378440] input: HDA Digital PCBeep as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[ 11.379790] input: HDA Intel Mic as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input18
[ 11.380186] input: HDA Intel Front Headphone as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input19
[ 11.633372] snd_hda_codec_hdmi hdaudioC1D1: HDMI: audio coding type
0 not expected
[ 11.684797] EXT4-fs (sda3): mounted filesystem with ordered data
mode. Opts: data=ordered
[ 11.738837] input: HDA NVidia HDMI/DP,pcm=3 as
/devices/pci0000:00/0000:00:1c.0/0000:01:00.1/sound/card1/input14
[ 11.739181] input: HDA NVidia HDMI/DP,pcm=7 as
/devices/pci0000:00/0000:00:1c.0/0000:01:00.1/sound/card1/input15
[ 11.739522] input: HDA NVidia HDMI/DP,pcm=8 as
/devices/pci0000:00/0000:00:1c.0/0000:01:00.1/sound/card1/input16
[ 11.739865] input: HDA NVidia HDMI/DP,pcm=9 as
/devices/pci0000:00/0000:00:1c.0/0000:01:00.1/sound/card1/input20
[ 12.960048] snd_hda_codec_hdmi hdaudioC1D1: HDMI: audio coding type
0 not expected
[ 13.227036] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 14.674263] wlp3s0: authenticate with 08:96:d7:7a:7f:0e
[ 14.693808] wlp3s0: send auth to 08:96:d7:7a:7f:0e (try 1/3)
[ 14.697978] wlp3s0: authenticated
[ 14.700066] wlp3s0: associate with 08:96:d7:7a:7f:0e (try 1/3)
[ 14.708938] wlp3s0: RX AssocResp from 08:96:d7:7a:7f:0e
(capab=0x431 status=0 aid=3)
[ 14.709202] wlp3s0: associated
[ 14.709220] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[ 0.000000] Linux version 4.9.6-1-ARCH (builduser@tobias) (gcc
version 6.3.1 20170109 (GCC) ) #1 SMP PREEMPT Thu Jan 26 09:22:26 CET
2017
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux
root=UUID=399040bd-474e-4c19-84b5-ae6235771846 rw quiet
[ 0.000000] x86/fpu: Legacy x87 FPU detected.
[ 0.000000] x86/fpu: Using 'eager' FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ffaffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007ffb0000-0x000000007ffbdfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000007ffbe000-0x000000007ffeffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000007fff0000-0x000000007fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.6 present.
[ 0.000000] DMI: Standard XS35/B10IE01, BIOS 080015 06/23/2011
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x7ffb0 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-D3FFF write-protect
[ 0.000000] D4000-DFFFF uncachable
[ 0.000000] E0000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f]
mapped at [ffff8800000ff780]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[ 0.000000] BRK [0x01d57000, 0x01d57fff] PGTABLE
[ 0.000000] BRK [0x01d58000, 0x01d58fff] PGTABLE
[ 0.000000] BRK [0x01d59000, 0x01d59fff] PGTABLE
[ 0.000000] BRK [0x01d5a000, 0x01d5afff] PGTABLE
[ 0.000000] BRK [0x01d5b000, 0x01d5bfff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x374c2000-0x37a58fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F9ED0 000024 (v02 ACPIAM)
[ 0.000000] ACPI: XSDT 0x000000007FFB0100 000054 (v01 Shuttl
Shuttle 20110623 MSFT 00000097)
[ 0.000000] ACPI: FACP 0x000000007FFB0290 0000F4 (v04 062311
FACP1651 20110623 MSFT 00000097)
[ 0.000000] ACPI: DSDT 0x000000007FFB05C0 006645 (v02 XS35V
XS35V10 00000200 INTL 20051117)
[ 0.000000] ACPI: FACS 0x000000007FFBE000 000040
[ 0.000000] ACPI: FACS 0x000000007FFBE000 000040
[ 0.000000] ACPI: APIC 0x000000007FFB0390 00006C (v02 062311
APIC1651 20110623 MSFT 00000097)
[ 0.000000] ACPI: MCFG 0x000000007FFB0400 00003C (v01 062311
OEMMCFG 20110623 MSFT 00000097)
[ 0.000000] ACPI: SLIC 0x000000007FFB0440 000176 (v01 Shuttl
Shuttle 20110623 MSFT 00000097)
[ 0.000000] ACPI: OEMB 0x000000007FFBE040 000072 (v01 062311
OEMB1651 20110623 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x000000007FFBA5C0 000038 (v01 062311
OEMHPET 20110623 MSFT 00000097)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000007ffaffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x7ffab000-0x7ffaffff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x000000007ffaffff]
[ 0.000000] Normal empty
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000007ffaffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000007ffaffff]
[ 0.000000] On node 0 totalpages: 524110
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 8127 pages used for memmap
[ 0.000000] DMA32 zone: 520112 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] e820: [mem 0x80000000-0xfedfffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff
max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128
nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] percpu: Embedded 35 pages/cpu @ffff88007fc00000 s103512
r8192 d31656 u524288
[ 0.000000] pcpu-alloc: s103512 r8192 d31656 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on.
Total pages: 515898
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux
root=UUID=399040bd-474e-4c19-84b5-ae6235771846 rw quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 2043540K/2096440K available (6205K kernel code,
1071K rwdata, 1940K rodata, 1280K init, 1032K bss, 52900K reserved, 0K
cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[ 0.000000] NR_IRQS:8448 nr_irqs:456 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles:
0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 1795.514 MHz processor
[ 0.003352] Calibrating delay loop (skipped), value calculated
using timer frequency.. 3592.65 BogoMIPS (lpj=5985046)
[ 0.003359] pid_max: default: 32768 minimum: 301
[ 0.003398] ACPI: Core revision 20160831
[ 0.020066] ACPI: 1 ACPI AML tables successfully acquired and loaded
[ 0.020163] Security Framework initialized
[ 0.020166] Yama: becoming mindful.
[ 0.020520] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.022230] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.023039] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.023050] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.023754] CPU: Physical Processor ID: 0
[ 0.023758] CPU: Processor Core ID: 0
[ 0.023761] mce: CPU supports 5 MCE banks
[ 0.023772] CPU0: Thermal monitoring enabled (TM1)
[ 0.023780] process: using mwait in idle threads
[ 0.023787] Last level iTLB entries: 4KB 32, 2MB 0, 4MB 0
[ 0.023790] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 8, 1GB 0
[ 0.024323] Freeing SMP alternatives memory: 24K (ffffffff81c4d000
- ffffffff81c53000)
[ 0.026684] ftrace: allocating 24613 entries in 97 pages
[ 0.043561] smpboot: Max logical packages: 2
[ 0.043996] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.079999] smpboot: CPU0: Intel(R) Atom(TM) CPU D525 @ 1.80GHz
(family: 0x6, model: 0x1c, stepping: 0xa)
[ 0.079999] Performance Events: PEBS fmt0+, Atom events, 8-deep
LBR, Intel PMU driver.
[ 0.079999] ... version: 3
[ 0.079999] ... bit width: 40
[ 0.079999] ... generic registers: 2
[ 0.079999] ... value mask: 000000ffffffffff
[ 0.079999] ... max period: 000000007fffffff
[ 0.079999] ... fixed-purpose events: 3
[ 0.079999] ... event mask: 0000000700000003
[ 0.110239] NMI watchdog: enabled on all CPUs, permanently consumes
one hw-PMU counter.
[ 0.143383] x86: Booting SMP configuration:
[ 0.143387] .... node #0, CPUs: #1
[ 0.006666] Disabled fast string operations
[ 0.253377] #2
[ 0.006666] Disabled fast string operations
[ 0.363384] #3
[ 0.006666] Disabled fast string operations
[ 0.448712] x86: Booted up 1 node, 4 CPUs
[ 0.448712] smpboot: Total of 4 processors activated (14369.18 BogoMIPS)
[ 0.450641] devtmpfs: initialized
[ 0.450641] x86/mm: Memory block size: 128MB
[ 0.459458] PM: Registering ACPI NVS region [mem
0x7ffbe000-0x7ffeffff] (204800 bytes)
[ 0.459458] clocksource: jiffies: mask: 0xffffffff max_cycles:
0xffffffff, max_idle_ns: 6370867519511994 ns
[ 0.459458] pinctrl core: initialized pinctrl subsystem
[ 0.459458] RTC time: 13:42:16, date: 02/11/17
[ 0.460241] NET: Registered protocol family 16
[ 0.470017] cpuidle: using governor ladder
[ 0.483349] cpuidle: using governor menu
[ 0.483412] ACPI: bus type PCI registered
[ 0.483416] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.483595] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem
0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.483599] PCI: not using MMCONFIG
[ 0.483602] PCI: Using configuration type 1 for base access
[ 0.483758] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.483760] mtrr: probably your BIOS does not setup all CPUs.
[ 0.483761] mtrr: corrected configuration.
[ 0.496769] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.496882] ACPI: Added _OSI(Module Device)
[ 0.496886] ACPI: Added _OSI(Processor Device)
[ 0.496888] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.496890] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.497211] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.503017] ACPI Error: No handler for Region [ECRM]
(ffff88007d09bee8) [EmbeddedControl] (20160831/evregion-166)
[ 0.503041] ACPI Error: Region EmbeddedControl (ID=3) has no
handler (20160831/exfldio-299)
[ 0.503059] ACPI Error: Method parse/execution failed
[\_SB.PCI0.SBRG.EC0._REG] (Node ffff88007d09da00), AE_NOT_EXIST
(20160831/psparse-543)
[ 0.504864] ACPI : EC: EC started
[ 0.983441] ACPI: \_SB_.PCI0.SBRG.EC0_: Used as first EC
[ 0.983446] ACPI: \_SB_.PCI0.SBRG.EC0_: GPE=0x1d,
EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.983450] ACPI: \_SB_.PCI0.SBRG.EC0_: Used as boot DSDT EC to
handle transactions
[ 0.983451] ACPI: Interpreter enabled
[ 0.983498] ACPI: (supports S0 S3 S4 S5)
[ 0.983501] ACPI: Using IOAPIC for interrupt routing
[ 0.983589] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem
0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.985979] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved
in ACPI motherboard resources
[ 0.986021] PCI: Using host bridge windows from ACPI; if necessary,
use "pci=nocrs" and report a bug
[ 0.999228] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.999242] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM
ClockPM Segments MSI]
[ 0.999254] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.999877] PCI host bridge to bus 0000:00
[ 0.999884] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.999888] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.999892] pci_bus 0000:00: root bus resource [mem
0x000a0000-0x000bffff window]
[ 0.999896] pci_bus 0000:00: root bus resource [mem
0x000d0000-0x000dffff window]
[ 0.999900] pci_bus 0000:00: root bus resource [mem
0x80000000-0xdfffffff window]
[ 0.999904] pci_bus 0000:00: root bus resource [mem
0xf0000000-0xfed8ffff window]
[ 0.999909] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.999925] pci 0000:00:00.0: [8086:a000] type 00 class 0x060000
[ 1.000199] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
[ 1.000222] pci 0000:00:1b.0: reg 0x10: [mem 0xfcffc000-0xfcffffff 64bit]
[ 1.000307] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 1.000430] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 1.000542] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
[ 1.000628] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 1.000742] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 1.000863] pci 0000:00:1c.1: [8086:27d2] type 01 class 0x060400
[ 1.000949] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 1.001064] pci 0000:00:1c.1: System wakeup disabled by ACPI
[ 1.001175] pci 0000:00:1c.3: [8086:27d6] type 01 class 0x060400
[ 1.001260] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 1.001510] pci 0000:00:1c.3: System wakeup disabled by ACPI
[ 1.001624] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
[ 1.001668] pci 0000:00:1d.0: reg 0x20: [io 0xbc00-0xbc1f]
[ 1.001847] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 1.001961] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
[ 1.002004] pci 0000:00:1d.1: reg 0x20: [io 0xb880-0xb89f]
[ 1.002182] pci 0000:00:1d.1: System wakeup disabled by ACPI
[ 1.002292] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
[ 1.002335] pci 0000:00:1d.2: reg 0x20: [io 0xb800-0xb81f]
[ 1.003464] pci 0000:00:1d.2: System wakeup disabled by ACPI
[ 1.003576] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
[ 1.003619] pci 0000:00:1d.3: reg 0x20: [io 0xb480-0xb49f]
[ 1.003801] pci 0000:00:1d.3: System wakeup disabled by ACPI
[ 1.003917] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
[ 1.003938] pci 0000:00:1d.7: reg 0x10: [mem 0xfcffbc00-0xfcffbfff]
[ 1.004028] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 1.004137] pci 0000:00:1d.7: System wakeup disabled by ACPI
[ 1.004247] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[ 1.004403] pci 0000:00:1e.0: System wakeup disabled by ACPI
[ 1.004519] pci 0000:00:1f.0: [8086:27bc] type 00 class 0x060100
[ 1.004605] pci 0000:00:1f.0: [Firmware Bug]: TigerPoint LPC.BM_STS cleared
[ 1.004830] pci 0000:00:1f.2: [8086:27c0] type 00 class 0x01018a
[ 1.004847] pci 0000:00:1f.2: reg 0x10: [io 0x0000-0x0007]
[ 1.004857] pci 0000:00:1f.2: reg 0x14: [io 0x0000-0x0003]
[ 1.004867] pci 0000:00:1f.2: reg 0x18: [io 0x0000-0x0007]
[ 1.004876] pci 0000:00:1f.2: reg 0x1c: [io 0x0000-0x0003]
[ 1.004886] pci 0000:00:1f.2: reg 0x20: [io 0xff90-0xff9f]
[ 1.004897] pci 0000:00:1f.2: reg 0x24: [mem 0x0000fc00-0x0000ffff]
[ 1.004909] pci 0000:00:1f.2: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 1.004913] pci 0000:00:1f.2: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 1.004917] pci 0000:00:1f.2: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 1.004920] pci 0000:00:1f.2: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 1.004952] pci 0000:00:1f.2: PME# supported from D3hot
[ 1.005166] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
[ 1.005220] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f]
[ 1.005532] pci 0000:01:00.0: [10de:0a6f] type 00 class 0x030000
[ 1.005555] pci 0000:01:00.0: reg 0x10: [mem 0xfd000000-0xfdffffff]
[ 1.005574] pci 0000:01:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff
64bit pref]
[ 1.005592] pci 0000:01:00.0: reg 0x1c: [mem 0xce000000-0xcfffffff
64bit pref]
[ 1.005605] pci 0000:01:00.0: reg 0x24: [io 0xcc00-0xcc7f]
[ 1.005619] pci 0000:01:00.0: reg 0x30: [mem 0xfe980000-0xfe9fffff pref]
[ 1.005819] pci 0000:01:00.1: [10de:0be3] type 00 class 0x040300
[ 1.005841] pci 0000:01:00.1: reg 0x10: [mem 0xfe97c000-0xfe97ffff]
[ 1.013375] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 1.013382] pci 0000:00:1c.0: bridge window [io 0xc000-0xcfff]
[ 1.013388] pci 0000:00:1c.0: bridge window [mem 0xfd000000-0xfe9fffff]
[ 1.013395] pci 0000:00:1c.0: bridge window [mem
0xce000000-0xdfffffff 64bit pref]
[ 1.013551] pci 0000:02:00.0: [197b:2382] type 00 class 0x088000
[ 1.013578] pci 0000:02:00.0: reg 0x10: [mem 0xfeaffc00-0xfeaffcff]
[ 1.013878] pci 0000:02:00.2: [197b:2381] type 00 class 0x080501
[ 1.013905] pci 0000:02:00.2: reg 0x10: [mem 0xfeaff800-0xfeaff8ff]
[ 1.014185] pci 0000:02:00.3: [197b:2383] type 00 class 0x088000
[ 1.014212] pci 0000:02:00.3: reg 0x10: [mem 0xfeaff400-0xfeaff4ff]
[ 1.014492] pci 0000:02:00.5: [197b:0250] type 00 class 0x020000
[ 1.014519] pci 0000:02:00.5: reg 0x10: [mem 0xfeaf4000-0xfeaf7fff]
[ 1.014547] pci 0000:02:00.5: reg 0x18: [io 0xdc00-0xdc7f]
[ 1.014562] pci 0000:02:00.5: reg 0x1c: [io 0xd800-0xd8ff]
[ 1.014686] pci 0000:02:00.5: PME# supported from D0 D3hot D3cold
[ 1.014757] pci 0000:02:00.5: System wakeup disabled by ACPI
[ 1.023368] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 1.023374] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff]
[ 1.023380] pci 0000:00:1c.1: bridge window [mem 0xfea00000-0xfeafffff]
[ 1.023523] pci 0000:03:00.0: [10ec:8176] type 00 class 0x028000
[ 1.023550] pci 0000:03:00.0: reg 0x10: [io 0xe800-0xe8ff]
[ 1.023584] pci 0000:03:00.0: reg 0x18: [mem 0xfebfc000-0xfebfffff 64bit]
[ 1.023711] pci 0000:03:00.0: supports D1 D2
[ 1.023715] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.033366] pci 0000:00:1c.3: PCI bridge to [bus 03]
[ 1.033372] pci 0000:00:1c.3: bridge window [io 0xe000-0xefff]
[ 1.033378] pci 0000:00:1c.3: bridge window [mem 0xfeb00000-0xfebfffff]
[ 1.033503] pci 0000:00:1e.0: PCI bridge to [bus 04] (subtractive decode)
[ 1.033516] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7
window] (subtractive decode)
[ 1.033520] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff
window] (subtractive decode)
[ 1.033524] pci 0000:00:1e.0: bridge window [mem
0x000a0000-0x000bffff window] (subtractive decode)
[ 1.033528] pci 0000:00:1e.0: bridge window [mem
0x000d0000-0x000dffff window] (subtractive decode)
[ 1.033532] pci 0000:00:1e.0: bridge window [mem
0x80000000-0xdfffffff window] (subtractive decode)
[ 1.033536] pci 0000:00:1e.0: bridge window [mem
0xf0000000-0xfed8ffff window] (subtractive decode)
[ 1.035188] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 *10 11 12 14 15)
[ 1.035350] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 *11 12 14 15)
[ 1.035518] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 *7 10 11 12 14 15)
[ 1.035677] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 7 10 11 12 14 15)
[ 1.035834] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12
14 15) *0, disabled.
[ 1.035993] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12
14 15) *0, disabled.
[ 1.036152] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12
14 15) *0, disabled.
[ 1.036311] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 7 10 11 12 14 15)
[ 1.036567] ACPI: Enabled 3 GPEs in block 00 to 1F
[ 1.036764] ACPI : EC: event unblocked
[ 1.036776] ACPI: \_SB_.PCI0.SBRG.EC0_: GPE=0x1d,
EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 1.036780] ACPI: \_SB_.PCI0.SBRG.EC0_: Used as boot DSDT EC to
handle transactions and events
[ 1.037091] vgaarb: setting as boot device: PCI:0000:01:00.0
[ 1.037091] vgaarb: device added:
PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 1.037091] vgaarb: loaded
[ 1.037091] vgaarb: bridge control possible 0000:01:00.0
[ 1.037091] PCI: Using ACPI for IRQ routing
[ 1.041208] PCI: pci_cache_line_size set to 64 bytes
[ 1.041293] pci 0000:00:1f.2: can't claim BAR 5 [mem
0x0000fc00-0x0000ffff]: no compatible bridge window
[ 1.041308] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
[ 1.041312] e820: reserve RAM buffer [mem 0x7ffb0000-0x7fffffff]
[ 1.041646] NetLabel: Initializing
[ 1.041649] NetLabel: domain hash size = 128
[ 1.041650] NetLabel: protocols = UNLABELED CIPSOv4
[ 1.041683] NetLabel: unlabeled traffic allowed by default
[ 1.043409] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 1.043416] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 1.043424] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 1.046718] clocksource: Switched to clocksource hpet
[ 1.068040] VFS: Disk quotas dquot_6.6.0
[ 1.068098] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.068344] pnp: PnP ACPI init
[ 1.068553] system 00:00: [mem 0xfed14000-0xfed19fff] has been reserved
[ 1.068559] system 00:00: [mem 0xfed90000-0xfed93fff] has been reserved
[ 1.068569] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 1.068746] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 1.068896] pnp 00:02: Plug and Play ACPI device, IDs PNP0303
PNP030b (active)
[ 1.069070] pnp 00:03: Plug and Play ACPI device, IDs PNP0f03
PNP0f13 (active)
[ 1.069412] system 00:04: [io 0x04d0-0x04d1] has been reserved
[ 1.069418] system 00:04: [io 0x0800-0x087f] has been reserved
[ 1.069422] system 00:04: [io 0x0480-0x04bf] has been reserved
[ 1.069428] system 00:04: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 1.069433] system 00:04: [mem 0xfed20000-0xfed8ffff] has been reserved
[ 1.069441] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.069718] system 00:05: [mem 0xffc00000-0xffefffff] has been reserved
[ 1.069727] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.070090] system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 1.070096] system 00:06: [mem 0xfee00000-0xfee00fff] has been reserved
[ 1.070105] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.070294] system 00:07: [mem 0xe0000000-0xefffffff] has been reserved
[ 1.070303] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.070781] system 00:08: [mem 0x00000000-0x0009ffff] could not be reserved
[ 1.070788] system 00:08: [mem 0x000c0000-0x000cffff] could not be reserved
[ 1.070792] system 00:08: [mem 0x000e0000-0x000fffff] could not be reserved
[ 1.070797] system 00:08: [mem 0x00100000-0x7fffffff] could not be reserved
[ 1.070802] system 00:08: [mem 0xfed90000-0xffffffff] could not be reserved
[ 1.070810] system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 1.071159] pnp: PnP ACPI: found 9 devices
[ 1.082436] clocksource: acpi_pm: mask: 0xffffff max_cycles:
0xffffff, max_idle_ns: 2085701024 ns
[ 1.082488] pci 0000:00:1c.1: bridge window [mem
0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
add_align 100000
[ 1.082501] pci 0000:00:1c.3: bridge window [mem
0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
add_align 100000
[ 1.082523] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff
64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 1.082528] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x002fffff
64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 1.082533] pci 0000:00:1c.3: res[15]=[mem 0x00100000-0x000fffff
64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 1.082537] pci 0000:00:1c.3: res[15]=[mem 0x00100000-0x002fffff
64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 1.082554] pci 0000:00:1c.1: BAR 15: assigned [mem
0x80000000-0x801fffff 64bit pref]
[ 1.082564] pci 0000:00:1c.3: BAR 15: assigned [mem
0x80200000-0x803fffff 64bit pref]
[ 1.082570] pci 0000:00:1f.2: BAR 5: assigned [mem 0x80400000-0x804003ff]
[ 1.082581] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 1.082586] pci 0000:00:1c.0: bridge window [io 0xc000-0xcfff]
[ 1.082593] pci 0000:00:1c.0: bridge window [mem 0xfd000000-0xfe9fffff]
[ 1.082599] pci 0000:00:1c.0: bridge window [mem
0xce000000-0xdfffffff 64bit pref]
[ 1.082608] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 1.082613] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff]
[ 1.082619] pci 0000:00:1c.1: bridge window [mem 0xfea00000-0xfeafffff]
[ 1.082625] pci 0000:00:1c.1: bridge window [mem
0x80000000-0x801fffff 64bit pref]
[ 1.082632] pci 0000:00:1c.3: PCI bridge to [bus 03]
[ 1.082637] pci 0000:00:1c.3: bridge window [io 0xe000-0xefff]
[ 1.082643] pci 0000:00:1c.3: bridge window [mem 0xfeb00000-0xfebfffff]
[ 1.082649] pci 0000:00:1c.3: bridge window [mem
0x80200000-0x803fffff 64bit pref]
[ 1.082657] pci 0000:00:1e.0: PCI bridge to [bus 04]
[ 1.082671] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 1.082675] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 1.082679] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 1.082683] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window]
[ 1.082687] pci_bus 0000:00: resource 8 [mem 0x80000000-0xdfffffff window]
[ 1.082691] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfed8ffff window]
[ 1.082695] pci_bus 0000:01: resource 0 [io 0xc000-0xcfff]
[ 1.082699] pci_bus 0000:01: resource 1 [mem 0xfd000000-0xfe9fffff]
[ 1.082703] pci_bus 0000:01: resource 2 [mem 0xce000000-0xdfffffff
64bit pref]
[ 1.082707] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
[ 1.082711] pci_bus 0000:02: resource 1 [mem 0xfea00000-0xfeafffff]
[ 1.082715] pci_bus 0000:02: resource 2 [mem 0x80000000-0x801fffff
64bit pref]
[ 1.082719] pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
[ 1.082723] pci_bus 0000:03: resource 1 [mem 0xfeb00000-0xfebfffff]
[ 1.082727] pci_bus 0000:03: resource 2 [mem 0x80200000-0x803fffff
64bit pref]
[ 1.082731] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7 window]
[ 1.082735] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff window]
[ 1.082739] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff window]
[ 1.082743] pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000dffff window]
[ 1.082747] pci_bus 0000:04: resource 8 [mem 0x80000000-0xdfffffff window]
[ 1.082751] pci_bus 0000:04: resource 9 [mem 0xf0000000-0xfed8ffff window]
[ 1.082956] NET: Registered protocol family 2
[ 1.083393] TCP established hash table entries: 16384 (order: 5,
131072 bytes)
[ 1.083517] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[ 1.083648] TCP: Hash tables configured (established 16384 bind 16384)
[ 1.083748] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[ 1.083781] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[ 1.083939] NET: Registered protocol family 1
[ 1.085289] pci 0000:01:00.0: Video device with shadowed ROM at
[mem 0x000c0000-0x000dffff]
[ 1.085328] PCI: CLS 32 bytes, default 64
[ 1.085481] Unpacking initramfs...
[ 1.301116] Freeing initrd memory: 5724K (ffff8800374c2000 -
ffff880037a59000)
[ 1.301375] Scanning for low memory corruption every 60 seconds
[ 1.302263] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 1.303104] Initialise system trusted keyrings
[ 1.303414] workingset: timestamp_bits=40 max_order=19 bucket_order=0
[ 1.308826] zbud: loaded
[ 1.310211] Key type asymmetric registered
[ 1.310336] Block layer SCSI generic (bsg) driver version 0.4
loaded (major 249)
[ 1.310437] io scheduler noop registered
[ 1.310440] io scheduler deadline registered
[ 1.310463] io scheduler cfq registered (default)
[ 1.311684] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.311707] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.311743] vesafb: mode is 640x480x32, linelength=2560, pages=0
[ 1.311744] vesafb: scrolling: redraw
[ 1.311748] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 1.311775] vesafb: framebuffer at 0xcf000000, mapped to
0xffffc90000600000, using 1216k, total 1216k
[ 1.369776] Console: switching to colour frame buffer device 80x30
[ 1.427452] fb0: VESA VGA frame buffer device
[ 1.427504] intel_idle: MWAIT substates: 0x10
[ 1.427507] intel_idle: v0.4.1 model 0x1C
[ 1.427700] intel_idle: lapic_timer_reliable_states 0x2
[ 1.428076] GHES: HEST is not enabled!
[ 1.428344] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.429603] Linux agpgart interface v0.103
[ 1.430540] rtc_cmos 00:01: RTC can wake from S4
[ 1.430802] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 1.430842] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes
nvram, hpet irqs
[ 1.430978] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.431656] NET: Registered protocol family 10
[ 1.432312] NET: Registered protocol family 17
[ 1.432914] microcode: sig=0x106ca, pf=0x8, revision=0x107
[ 1.433071] microcode: Microcode Update Driver: v2.01
<tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 1.433519] registered taskstats version 1
[ 1.433540] Loading compiled-in X.509 certificates
[ 1.433607] zswap: loaded using pool lzo/zbud
[ 1.434469] Magic number: 5:862:735
[ 1.434652] rtc_cmos 00:01: setting system clock to 2017-02-11
13:42:17 UTC (1486820537)
[ 1.434756] PM: Hibernation image not present or could not be loaded.
[ 1.438535] Freeing unused kernel memory: 1280K (ffffffff81b0d000 -
ffffffff81c4d000)
[ 1.438540] Write protecting the kernel read-only data: 10240k
[ 1.440500] Freeing unused kernel memory: 1972K (ffff880001613000 -
ffff880001800000)
[ 1.441425] Freeing unused kernel memory: 108K (ffff8800019e5000 -
ffff880001a00000)
[ 1.467935] random: systemd-tmpfile: uninitialized urandom read (16
bytes read)
[ 1.474416] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.474612] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.478163] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.478259] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.493269] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.493382] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.493418] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.494489] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.494587] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.581498] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M]
at 0x60,0x64 irq 1,12
[ 1.584360] i8042: Detected active multiplexing controller, rev 1.0
[ 1.585186] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.585418] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 1.585600] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 1.585787] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 1.586021] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 1.607369] sdhci: Secure Digital Host Controller Interface driver
[ 1.607372] sdhci: Copyright(c) Pierre Ossman
[ 1.608445] sdhci-pci 0000:02:00.0: SDHCI controller found
[197b:2382] (rev 80)
[ 1.610906] mmc0: SDHCI controller on PCI [0000:02:00.0] using ADMA
[ 1.611073] sdhci-pci 0000:02:00.2: SDHCI controller found
[197b:2381] (rev 80)
[ 1.611402] sdhci-pci 0000:02:00.2: Refusing to bind to secondary interface.
[ 1.617929] ACPI: bus type USB registered
[ 1.618047] usbcore: registered new interface driver usbfs
[ 1.618116] usbcore: registered new interface driver hub
[ 1.618252] usbcore: registered new device driver usb
[ 1.620506] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.621355] ehci-pci: EHCI PCI platform driver
[ 1.621778] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 1.621808] ehci-pci 0000:00:1d.7: new USB bus registered, assigned
bus number 1
[ 1.621835] ehci-pci 0000:00:1d.7: debug port 1
[ 1.625770] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
[ 1.625822] ehci-pci 0000:00:1d.7: irq 23, io mem 0xfcffbc00
[ 1.627408] SCSI subsystem initialized
[ 1.632658] libata version 3.00 loaded.
[ 1.636768] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.637496] hub 1-0:1.0: USB hub found
[ 1.637542] hub 1-0:1.0: 8 ports detected
[ 1.638309] ata_piix 0000:00:1f.2: version 2.13
[ 1.638326] ata_piix 0000:00:1f.2: enabling device (0005 -> 0007)
[ 1.639581] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.639595] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 1.642662] scsi host0: ata_piix
[ 1.643029] scsi host1: ata_piix
[ 1.643193] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xff90 irq 14
[ 1.643197] ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xff98 irq 15
[ 1.643639] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.643671] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned
bus number 2
[ 1.643691] uhci_hcd 0000:00:1d.0: detected 2 ports
[ 1.643731] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000bc00
[ 1.644537] hub 2-0:1.0: USB hub found
[ 1.644574] hub 2-0:1.0: 2 ports detected
[ 1.645351] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.645380] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned
bus number 3
[ 1.645399] uhci_hcd 0000:00:1d.1: detected 2 ports
[ 1.645461] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b880
[ 1.646291] hub 3-0:1.0: USB hub found
[ 1.646331] hub 3-0:1.0: 2 ports detected
[ 1.647087] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.647110] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned
bus number 4
[ 1.647127] uhci_hcd 0000:00:1d.2: detected 2 ports
[ 1.647164] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b800
[ 1.647992] hub 4-0:1.0: USB hub found
[ 1.648032] hub 4-0:1.0: 2 ports detected
[ 1.648822] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 1.648850] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned
bus number 5
[ 1.648870] uhci_hcd 0000:00:1d.3: detected 2 ports
[ 1.648935] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000b480
[ 1.649763] hub 5-0:1.0: USB hub found
[ 1.649802] hub 5-0:1.0: 2 ports detected
[ 1.685985] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input0
[ 1.800340] ata2.01: NODEV after polling detection
[ 1.802685] ata1.00: ATA-8: HGST HTS721010A9E630, JB0OA3B0, max UDMA/133
[ 1.802690] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.807430] ata1.00: configured for UDMA/133
[ 1.807892] scsi 0:0:0:0: Direct-Access ATA HGST
HTS721010A9 A3B0 PQ: 0 ANSI: 5
[ 1.820173] ata2.00: ATAPI: HL-DT-STDVDRAM GT32N, 1.00, max UDMA/100
[ 1.824714] ata2.00: configured for UDMA/100
[ 1.866059] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GT32N
1.00 PQ: 0 ANSI: 5
[ 1.885104] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks:
(1.00 TB/932 GiB)
[ 1.885113] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 1.885402] sd 0:0:0:0: [sda] Write Protect is off
[ 1.885411] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.885530] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 1.907146] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer
dvd-ram cd/rw xa/form2 cdda tray
[ 1.907151] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.907708] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.954957] sda: sda1 sda2 sda3 sda4
[ 1.956186] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.153396] usb 5-2: new full-speed USB device number 2 using uhci_hcd
[ 2.320046] tsc: Refined TSC clocksource calibration: 1795.499 MHz
[ 2.320061] clocksource: tsc: mask: 0xffffffffffffffff max_cycles:
0x19e18da41a2, max_idle_ns: 440795250832 ns
[ 2.354439] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.363227] usbcore: registered new interface driver usbhid
[ 2.363230] usbhid: USB HID core driver
[ 2.364064] random: fast init done
[ 2.371419] logitech-djreceiver 0003:046D:C52B.0003:
hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on
usb-0000:00:1d.3-2/input2
[ 2.719332] EXT4-fs (sda1): mounted filesystem with ordered data
mode. Opts: (null)
[ 2.755373] input: Logitech K400 as
/devices/pci0000:00/0000:00:1d.3/usb5/5-2/5-2:1.2/0003:046D:C52B.0003/0003:046D:400E.0004/input/input5
[ 2.755508] logitech-hidpp-device 0003:046D:400E.0004:
input,hidraw1: USB HID v1.11 Keyboard [Logitech K400] on
usb-0000:00:1d.3-2:1
[ 3.333558] clocksource: Switched to clocksource tsc
[ 3.652932] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 3.666611] systemd[1]: systemd 232 running in system mode. (+PAM
-AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP
+GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[ 3.667117] systemd[1]: Detected architecture x86-64.
[ 3.673923] systemd[1]: Set hostname to <stube>.
[ 4.383658] random: crng init done
[ 4.531697] systemd[1]: Listening on Journal Socket (/dev/log).
[ 4.531872] systemd[1]: Reached target Remote File Systems.
[ 4.533229] systemd[1]: Created slice System Slice.
[ 4.533873] systemd[1]: Created slice User and Session Slice.
[ 4.534030] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 4.536850] systemd[1]: Listening on Process Core Dump Socket.
[ 4.537043] systemd[1]: Listening on udev Control Socket.
[ 4.707588] EXT4-fs (sda1): re-mounted. Opts: data=ordered
[ 4.973933] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 4.974065] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 7.470645] systemd-journald[153]: Received request to flush
runtime journal from PID 1
[ 7.685018] input: Sleep Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input6
[ 7.685028] ACPI: Sleep Button [SLPB]
[ 7.685198] input: Power Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input7
[ 7.685203] ACPI: Power Button [PWRB]
[ 7.685358] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input8
[ 7.685363] ACPI: Power Button [PWRF]
[ 7.753394] wmi: Mapper loaded
[ 8.355540] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 8.370249] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 8.378647] ACPI Warning: SystemIO range
0x0000000000000828-0x000000000000082F conflicts with OpRegion
0x0000000000000800-0x000000000000083F (\PMS0) (20160831/utaddress-247)
[ 8.378668] ACPI Warning: SystemIO range
0x0000000000000828-0x000000000000082F conflicts with OpRegion
0x0000000000000800-0x000000000000087F (\_SB.PCI0.SBRG.EC0.PMIO)
(20160831/utaddress-247)
[ 8.378682] ACPI: If an ACPI driver is available for this device,
you should use it instead of the native driver
[ 8.378801] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 8.410080] FUJITSU Extended Socket Network Device Driver - version
1.1 - Copyright (c) 2015 FUJITSU LIMITED
[ 8.460276] thermal LNXTHERM:00: registered as thermal_zone0
[ 8.460282] ACPI: Thermal Zone [TZ00] (64 C)
[ 8.610606] input: PC Speaker as /devices/platform/pcspkr/input/input9
[ 8.948744] snd_hda_intel 0000:01:00.1: Disabling MSI
[ 8.948757] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[ 9.174637] jme: JMicron JMC2XX ethernet driver version 1.0.8
[ 9.174718] jme 0000:02:00.5: can't disable ASPM; OS doesn't have
ASPM control
[ 9.176270] jme 0000:02:00.5 eth0: JMC250 Gigabit Ethernet
chiprev:23 pcirev:3 macaddr:80:ee:73:1f:ec:4a
[ 9.202546] intel_powerclamp: No package C-state available
[ 9.206721] iTCO_vendor_support: vendor-support=0
[ 9.208801] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 9.208931] iTCO_wdt: Found a NM10 TCO device (Version=2, TCOBASE=0x0860)
[ 9.210454] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 9.322629] snd_hda_codec_idt hdaudioC0D0: autoconfig for
92HD81B1X5: line_outs=1 (0xd/0x0/0x0/0x0/0x0) type:speaker
[ 9.322636] snd_hda_codec_idt hdaudioC0D0: speaker_outs=0
(0x0/0x0/0x0/0x0/0x0)
[ 9.322640] snd_hda_codec_idt hdaudioC0D0: hp_outs=1 (0xb/0x0/0x0/0x0/0x0)
[ 9.322644] snd_hda_codec_idt hdaudioC0D0: mono: mono_out=0x0
[ 9.322646] snd_hda_codec_idt hdaudioC0D0: inputs:
[ 9.322651] snd_hda_codec_idt hdaudioC0D0: Internal Mic=0xc
[ 9.322654] snd_hda_codec_idt hdaudioC0D0: Mic=0xa
[ 9.361697] input: HDA Digital PCBeep as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 9.362939] input: HDA Intel Mic as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[ 9.363249] input: HDA Intel Front Headphone as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[ 9.436577] gpio_ich: GPIO from 462 to 511 on gpio_ich
[ 9.499684] jme 0000:02:00.5 enp2s0f5: renamed from eth0
[ 9.662371] asus_wmi: Asus Management GUID not found
[ 9.684667] rtl8192ce: Using firmware rtlwifi/rtl8192cfwU.bin
[ 9.732261] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[ 9.732920] rtlwifi: rtlwifi: wireless switch is on
[ 10.025730] mousedev: PS/2 mouse device common for all mice
[ 10.184505] rtl8192ce 0000:03:00.0 wlp3s0: renamed from wlan0
[ 10.565634] [drm] Initialized
[ 10.661629] input: HDA NVidia HDMI/DP,pcm=3 as
/devices/pci0000:00/0000:00:1c.0/0000:01:00.1/sound/card1/input17
[ 10.661862] input: HDA NVidia HDMI/DP,pcm=7 as
/devices/pci0000:00/0000:00:1c.0/0000:01:00.1/sound/card1/input18
[ 10.662080] input: HDA NVidia HDMI/DP,pcm=8 as
/devices/pci0000:00/0000:00:1c.0/0000:01:00.1/sound/card1/input19
[ 10.662299] input: HDA NVidia HDMI/DP,pcm=9 as
/devices/pci0000:00/0000:00:1c.0/0000:01:00.1/sound/card1/input20
[ 11.539671] checking generic (cf000000 130000) vs hw (d0000000 10000000)
[ 11.539677] checking generic (cf000000 130000) vs hw (ce000000 2000000)
[ 11.539680] fb: switching to nouveaufb from VESA VGA
[ 11.539768] Console: switching to colour dummy device 80x25
[ 11.540381] nouveau 0000:01:00.0: NVIDIA GT218 (0a8780b1)
[ 11.685702] nouveau 0000:01:00.0: bios: version 70.18.64.00.0e
[ 11.688334] nouveau 0000:01:00.0: fb: 512 MiB DDR3
[ 11.742110] [TTM] Zone kernel: Available graphics memory: 1026324 kiB
[ 11.742113] [TTM] Initializing pool allocator
[ 11.742127] [TTM] Initializing DMA pool allocator
[ 11.742171] nouveau 0000:01:00.0: DRM: VRAM: 512 MiB
[ 11.742175] nouveau 0000:01:00.0: DRM: GART: 1048576 MiB
[ 11.742183] nouveau 0000:01:00.0: DRM: TMDS table version 2.0
[ 11.742187] nouveau 0000:01:00.0: DRM: DCB version 4.0
[ 11.742192] nouveau 0000:01:00.0: DRM: DCB outp 01: 02011300 00000000
[ 11.742197] nouveau 0000:01:00.0: DRM: DCB outp 02: 02022362 00020010
[ 11.742202] nouveau 0000:01:00.0: DRM: DCB conn 01: 00000100
[ 11.742205] nouveau 0000:01:00.0: DRM: DCB conn 02: 00001261
[ 11.768840] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 11.768845] [drm] Driver supports precise vblank timestamp query.
[ 11.826828] nouveau 0000:01:00.0: DRM: MM: using COPY for buffer copies
[ 11.943203] nouveau 0000:01:00.0: DRM: allocated 1920x1080 fb:
0x70000, bo ffff880074f27c00
[ 11.943495] fbcon: nouveaufb (fb0) is primary device
[ 12.017175] Console: switching to colour frame buffer device 240x67
[ 12.019733] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
[ 12.033400] [drm] Initialized nouveau 1.3.1 20120801 for
0000:01:00.0 on minor 0
[ 12.510479] EXT4-fs (sda3): mounted filesystem with ordered data
mode. Opts: data=ordered
[ 12.933367] snd_hda_codec_hdmi hdaudioC1D1: HDMI: audio coding type
0 not expected
[ 15.078250] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 16.524370] wlp3s0: authenticate with 08:96:d7:7a:7f:0e
[ 16.543819] wlp3s0: send auth to 08:96:d7:7a:7f:0e (try 1/3)
[ 16.547448] wlp3s0: authenticated
[ 16.550045] wlp3s0: associate with 08:96:d7:7a:7f:0e (try 1/3)
[ 16.559965] wlp3s0: RX AssocResp from 08:96:d7:7a:7f:0e
(capab=0x431 status=0 aid=3)
[ 16.560230] wlp3s0: associated
[ 16.560248] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
best,
rupert
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2017-02-11 17:42 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-02-09 14:45 linux <=4.9.5, 4.10-rc7 ok, 4.9.6 - 4.9.8 nok with realtek wlan, atom rupert THURNER
2017-02-09 19:43 ` Bjorn Helgaas
2017-02-09 20:09 ` Larry Finger
2017-02-11 17:42 ` rupert THURNER
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).