From: "Z.q. Hou" <zhiqiang.hou@nxp.com>
To: Andrew Murray <andrew.murray@arm.com>
Cc: "linux-pci@vger.kernel.org" <linux-pci@vger.kernel.org>,
"linux-arm-kernel@lists.infradead.org"
<linux-arm-kernel@lists.infradead.org>,
"devicetree@vger.kernel.org" <devicetree@vger.kernel.org>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
"bhelgaas@google.com" <bhelgaas@google.com>,
"robh+dt@kernel.org" <robh+dt@kernel.org>,
"arnd@arndb.de" <arnd@arndb.de>,
"mark.rutland@arm.com" <mark.rutland@arm.com>,
"l.subrahmanya@mobiveil.co.in" <l.subrahmanya@mobiveil.co.in>,
"shawnguo@kernel.org" <shawnguo@kernel.org>,
"m.karthikeyan@mobiveil.co.in" <m.karthikeyan@mobiveil.co.in>,
Leo Li <leoyang.li@nxp.com>,
"lorenzo.pieralisi@arm.com" <lorenzo.pieralisi@arm.com>,
"catalin.marinas@arm.com" <catalin.marinas@arm.com>,
"will.deacon@arm.com" <will.deacon@arm.com>,
Mingkai Hu <mingkai.hu@nxp.com>,
"M.h. Lian" <minghuan.lian@nxp.com>,
Xiaowei Bao <xiaowei.bao@nxp.com>
Subject: RE: [PATCHv9 03/12] PCI: mobiveil: Collect the interrupt related operations into a routine
Date: Thu, 6 Feb 2020 11:30:26 +0000 [thread overview]
Message-ID: <DB8PR04MB6747A8CA819635359CDC73B1841D0@DB8PR04MB6747.eurprd04.prod.outlook.com> (raw)
In-Reply-To: <20200113103431.GI42593@e119886-lin.cambridge.arm.com>
Hi Andrew,
Thanks a lot for your comments!
> -----Original Message-----
> From: Andrew Murray <andrew.murray@arm.com>
> Sent: 2020年1月13日 18:35
> To: Z.q. Hou <zhiqiang.hou@nxp.com>
> Cc: linux-pci@vger.kernel.org; linux-arm-kernel@lists.infradead.org;
> devicetree@vger.kernel.org; linux-kernel@vger.kernel.org;
> bhelgaas@google.com; robh+dt@kernel.org; arnd@arndb.de;
> mark.rutland@arm.com; l.subrahmanya@mobiveil.co.in;
> shawnguo@kernel.org; m.karthikeyan@mobiveil.co.in; Leo Li
> <leoyang.li@nxp.com>; lorenzo.pieralisi@arm.com;
> catalin.marinas@arm.com; will.deacon@arm.com; Mingkai Hu
> <mingkai.hu@nxp.com>; M.h. Lian <minghuan.lian@nxp.com>; Xiaowei Bao
> <xiaowei.bao@nxp.com>
> Subject: Re: [PATCHv9 03/12] PCI: mobiveil: Collect the interrupt related
> operations into a routine
>
> On Wed, Nov 20, 2019 at 03:45:37AM +0000, Z.q. Hou wrote:
> > From: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
> >
> > Collect the interrupt initialization related operations into a new
> > routine to make it more readable.
>
> I prefer the word 'function' instead of routine. Also indicate why, not only is it
> nicer but it is in preparation for EP support.
Will replace the 'routine' with 'function', it is only used in RC mode, not used in EP mode.
>
> >
> > Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
> > ---
> > V9:
> > - New patch splited from the #1 of V8 patches to make it easy to review.
> >
> > drivers/pci/controller/pcie-mobiveil.c | 65
> > +++++++++++++++++---------
> > 1 file changed, 42 insertions(+), 23 deletions(-)
> >
> > diff --git a/drivers/pci/controller/pcie-mobiveil.c
> > b/drivers/pci/controller/pcie-mobiveil.c
> > index 97f682ca7c7a..512b27a0536e 100644
> > --- a/drivers/pci/controller/pcie-mobiveil.c
> > +++ b/drivers/pci/controller/pcie-mobiveil.c
> > @@ -454,12 +454,6 @@ static int mobiveil_pcie_parse_dt(struct
> mobiveil_pcie *pcie)
> > return PTR_ERR(pcie->csr_axi_slave_base);
> > pcie->pcie_reg_base = res->start;
> >
> > - /* map MSI config resource */
> > - res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
> "apb_csr");
> > - pcie->apb_csr_base = devm_pci_remap_cfg_resource(dev, res);
> > - if (IS_ERR(pcie->apb_csr_base))
> > - return PTR_ERR(pcie->apb_csr_base);
> > -
> > /* read the number of windows requested */
> > if (of_property_read_u32(node, "apio-wins", &pcie->apio_wins))
> > pcie->apio_wins = MAX_PIO_WINDOWS;
> > @@ -467,12 +461,6 @@ static int mobiveil_pcie_parse_dt(struct
> mobiveil_pcie *pcie)
> > if (of_property_read_u32(node, "ppio-wins", &pcie->ppio_wins))
> > pcie->ppio_wins = MAX_PIO_WINDOWS;
> >
> > - rp->irq = platform_get_irq(pdev, 0);
> > - if (rp->irq <= 0) {
> > - dev_err(dev, "failed to map IRQ: %d\n", rp->irq);
> > - return -ENODEV;
> > - }
> > -
> > return 0;
> > }
> >
> > @@ -618,9 +606,6 @@ static int mobiveil_host_init(struct mobiveil_pcie
> *pcie)
> > pab_ctrl |= (1 << AMBA_PIO_ENABLE_SHIFT) | (1 <<
> PEX_PIO_ENABLE_SHIFT);
> > mobiveil_csr_writel(pcie, pab_ctrl, PAB_CTRL);
> >
> > - mobiveil_csr_writel(pcie, (PAB_INTP_INTX_MASK |
> PAB_INTP_MSI_MASK),
> > - PAB_INTP_AMBA_MISC_ENB);
> > -
> > /*
> > * program PIO Enable Bit to 1 and Config Window Enable Bit to 1 in
> > * PAB_AXI_PIO_CTRL Register
> > @@ -670,9 +655,6 @@ static int mobiveil_host_init(struct mobiveil_pcie
> *pcie)
> > value |= (PCI_CLASS_BRIDGE_PCI << 16);
> > mobiveil_csr_writel(pcie, value, PAB_INTP_AXI_PIO_CLASS);
> >
> > - /* setup MSI hardware registers */
> > - mobiveil_pcie_enable_msi(pcie);
> > -
> > return 0;
> > }
> >
> > @@ -873,6 +855,46 @@ static int mobiveil_pcie_init_irq_domain(struct
> mobiveil_pcie *pcie)
> > return 0;
> > }
> >
> > +static int mobiveil_pcie_interrupt_init(struct mobiveil_pcie *pcie) {
> > + struct platform_device *pdev = pcie->pdev;
> > + struct device *dev = &pdev->dev;
> > + struct root_port *rp = &pcie->rp;
> > + struct resource *res;
> > + int ret;
> > +
> > + /* map MSI config resource */
> > + res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
> "apb_csr");
> > + pcie->apb_csr_base = devm_pci_remap_cfg_resource(dev, res);
> > + if (IS_ERR(pcie->apb_csr_base))
> > + return PTR_ERR(pcie->apb_csr_base);
> > +
> > + /* setup MSI hardware registers */
> > + mobiveil_pcie_enable_msi(pcie);
>
> Does this need to come after mobiveil_pcie_init_irq_domain - given that this
> function sets up the irq domain for MSI?
No, I don't think so, because I didn't change the relative order of the 2 functions
you mentioned.
Thanks,
Zhiqiang
>
> Thanks,
>
> Andrew Murray
>
> > +
> > + rp->irq = platform_get_irq(pdev, 0);
> > + if (rp->irq <= 0) {
> > + dev_err(dev, "failed to map IRQ: %d\n", rp->irq);
> > + return -ENODEV;
> > + }
> > +
> > + /* initialize the IRQ domains */
> > + ret = mobiveil_pcie_init_irq_domain(pcie);
> > + if (ret) {
> > + dev_err(dev, "Failed creating IRQ Domain\n");
> > + return ret;
> > + }
> > +
> > + irq_set_chained_handler_and_data(rp->irq, mobiveil_pcie_isr, pcie);
> > +
> > + /* Enable interrupts */
> > + mobiveil_csr_writel(pcie, (PAB_INTP_INTX_MASK |
> PAB_INTP_MSI_MASK),
> > + PAB_INTP_AMBA_MISC_ENB);
> > +
> > +
> > + return 0;
> > +}
> > +
> > int mobiveil_pcie_host_probe(struct mobiveil_pcie *pcie) {
> > struct root_port *rp = &pcie->rp;
> > @@ -906,15 +928,12 @@ int mobiveil_pcie_host_probe(struct
> mobiveil_pcie *pcie)
> > return ret;
> > }
> >
> > - /* initialize the IRQ domains */
> > - ret = mobiveil_pcie_init_irq_domain(pcie);
> > + ret = mobiveil_pcie_interrupt_init(pcie);
> > if (ret) {
> > - dev_err(dev, "Failed creating IRQ Domain\n");
> > + dev_err(dev, "Interrupt init failed\n");
> > return ret;
> > }
> >
> > - irq_set_chained_handler_and_data(rp->irq, mobiveil_pcie_isr, pcie);
> > -
> > /* Initialize bridge */
> > bridge->dev.parent = dev;
> > bridge->sysdata = pcie;
> > --
> > 2.17.1
> >
next prev parent reply other threads:[~2020-02-06 11:30 UTC|newest]
Thread overview: 64+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-11-20 3:45 [PATCHv9 00/12] PCI: Recode Mobiveil driver and add PCIe Gen4 driver for NXP Layerscape SoCs Z.q. Hou
2019-11-20 3:45 ` [PATCHv9 01/12] PCI: mobiveil: Re-abstract the private structure Z.q. Hou
2020-01-13 10:09 ` Andrew Murray
2020-02-06 11:04 ` Z.q. Hou
2020-02-06 11:27 ` Andrew Murray
2019-11-20 3:45 ` [PATCHv9 02/12] PCI: mobiveil: Move the host initialization into a routine Z.q. Hou
2020-01-13 10:19 ` Andrew Murray
2020-02-06 11:14 ` Z.q. Hou
2019-11-20 3:45 ` [PATCHv9 03/12] PCI: mobiveil: Collect the interrupt related operations " Z.q. Hou
2020-01-13 10:34 ` Andrew Murray
2020-02-06 11:30 ` Z.q. Hou [this message]
2019-11-20 3:45 ` [PATCHv9 04/12] PCI: mobiveil: Modularize the Mobiveil PCIe Host Bridge IP driver Z.q. Hou
2020-01-13 11:05 ` Andrew Murray
2020-02-06 12:25 ` Z.q. Hou
2019-11-20 3:45 ` [PATCHv9 05/12] PCI: mobiveil: Add callback function for interrupt initialization Z.q. Hou
2020-01-13 11:19 ` Andrew Murray
2020-02-06 13:25 ` Z.q. Hou
2019-11-20 3:45 ` [PATCHv9 06/12] PCI: mobiveil: Add callback function for link up check Z.q. Hou
2020-01-13 11:22 ` Andrew Murray
2020-02-06 13:25 ` Z.q. Hou
2019-11-20 3:46 ` [PATCHv9 07/12] PCI: mobiveil: Make mobiveil_host_init() can be used to re-init host Z.q. Hou
2020-01-13 11:26 ` Andrew Murray
2020-02-06 13:27 ` Z.q. Hou
2019-11-20 3:46 ` [PATCHv9 08/12] PCI: mobiveil: Add 8-bit and 16-bit CSR register accessors Z.q. Hou
2020-01-13 11:31 ` Andrew Murray
2020-02-06 13:45 ` Z.q. Hou
2019-11-20 3:46 ` [PATCHv9 09/12] dt-bindings: PCI: Add NXP Layerscape SoCs PCIe Gen4 controller Z.q. Hou
2019-11-20 3:46 ` [PATCHv9 10/12] PCI: mobiveil: Add PCIe Gen4 RC driver for NXP Layerscape SoCs Z.q. Hou
2020-01-13 12:02 ` Andrew Murray
2020-02-06 13:45 ` Z.q. Hou
2020-02-06 14:29 ` Andrew Murray
2019-11-20 3:46 ` [PATCHv9 11/12] arm64: dts: lx2160a: Add PCIe controller DT nodes Z.q. Hou
2019-11-20 3:46 ` [PATCHv9 12/12] arm64: defconfig: Enable CONFIG_PCIE_LAYERSCAPE_GEN4 Z.q. Hou
2019-11-20 9:57 ` [PATCHv9 00/12] PCI: Recode Mobiveil driver and add PCIe Gen4 driver for NXP Layerscape SoCs Russell King - ARM Linux admin
2019-11-20 10:30 ` Z.q. Hou
2019-12-13 18:37 ` Olof Johansson
2019-12-17 2:50 ` Z.q. Hou
2020-01-10 15:33 ` Lorenzo Pieralisi
2020-01-10 17:05 ` Olof Johansson
2020-02-06 10:57 ` Z.q. Hou
2020-02-10 15:12 ` Olof Johansson
2020-02-10 15:22 ` Russell King - ARM Linux admin
2020-02-10 15:28 ` Olof Johansson
2020-02-10 16:15 ` Russell King - ARM Linux admin
2020-02-10 17:20 ` Russell King - ARM Linux admin
2020-02-10 18:33 ` Olof Johansson
2020-02-10 18:41 ` Li Yang
2020-02-10 19:48 ` Li Yang
2020-02-11 12:13 ` Laurentiu Tudor
2020-02-11 13:04 ` Robin Murphy
2020-02-11 13:55 ` Laurentiu Tudor
2020-02-11 14:51 ` Robin Murphy
2020-02-11 14:48 ` Olof Johansson
2020-02-11 15:14 ` Laurentiu Tudor
2020-02-29 9:55 ` Russell King - ARM Linux admin
2020-02-29 11:04 ` Russell King - ARM Linux admin
2020-02-29 12:08 ` Russell King - ARM Linux admin
2020-02-29 13:32 ` Russell King - ARM Linux admin
2020-02-29 15:19 ` Theodore Y. Ts'o
2020-02-29 17:03 ` Russell King - ARM Linux admin
2020-02-29 18:03 ` Theodore Y. Ts'o
2020-06-05 23:53 ` Russell King - ARM Linux admin
2020-06-06 10:19 ` Russell King - ARM Linux admin
2020-02-10 15:33 ` Lorenzo Pieralisi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=DB8PR04MB6747A8CA819635359CDC73B1841D0@DB8PR04MB6747.eurprd04.prod.outlook.com \
--to=zhiqiang.hou@nxp.com \
--cc=andrew.murray@arm.com \
--cc=arnd@arndb.de \
--cc=bhelgaas@google.com \
--cc=catalin.marinas@arm.com \
--cc=devicetree@vger.kernel.org \
--cc=l.subrahmanya@mobiveil.co.in \
--cc=leoyang.li@nxp.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=lorenzo.pieralisi@arm.com \
--cc=m.karthikeyan@mobiveil.co.in \
--cc=mark.rutland@arm.com \
--cc=minghuan.lian@nxp.com \
--cc=mingkai.hu@nxp.com \
--cc=robh+dt@kernel.org \
--cc=shawnguo@kernel.org \
--cc=will.deacon@arm.com \
--cc=xiaowei.bao@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).