From: Rob Herring <robh@kernel.org>
To: Mark Kettenis <mark.kettenis@xs4all.nl>
Cc: devicetree@vger.kernel.org, alyssa@rosenzweig.io,
Mark Kettenis <kettenis@openbsd.org>,
Thomas Gleixner <tglx@linutronix.de>,
Marc Zyngier <maz@kernel.org>, Hector Martin <marcan@marcan.st>,
Bjorn Helgaas <bhelgaas@google.com>,
Jim Quinlan <jim2101024@gmail.com>,
Nicolas Saenz Julienne <nsaenz@kernel.org>,
Florian Fainelli <f.fainelli@gmail.com>,
bcm-kernel-feedback-list@broadcom.com,
Daire McNamara <daire.mcnamara@microchip.com>,
Saenz Julienne <nsaenzjulienne@suse.de>,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, linux-pci@vger.kernel.org,
linux-rpi-kernel@lists.infradead.org
Subject: Re: [PATCH v4 3/4] dt-bindings: pci: Add DT bindings for apple,pcie
Date: Tue, 31 Aug 2021 16:21:28 -0500 [thread overview]
Message-ID: <YS6dWI4wwg7XkuNA@robh.at.kernel.org> (raw)
In-Reply-To: <20210827171534.62380-4-mark.kettenis@xs4all.nl>
On Fri, Aug 27, 2021 at 07:15:28PM +0200, Mark Kettenis wrote:
> From: Mark Kettenis <kettenis@openbsd.org>
>
> The Apple PCIe host controller is a PCIe host controller with
> multiple root ports present in Apple ARM SoC platforms, including
> various iPhone and iPad devices and the "Apple Silicon" Macs.
>
> Signed-off-by: Mark Kettenis <kettenis@openbsd.org>
> ---
> .../devicetree/bindings/pci/apple,pcie.yaml | 165 ++++++++++++++++++
> MAINTAINERS | 1 +
> 2 files changed, 166 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/pci/apple,pcie.yaml
>
> diff --git a/Documentation/devicetree/bindings/pci/apple,pcie.yaml b/Documentation/devicetree/bindings/pci/apple,pcie.yaml
> new file mode 100644
> index 000000000000..97a126db935a
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pci/apple,pcie.yaml
> @@ -0,0 +1,165 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/pci/apple,pcie.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Apple PCIe host controller
> +
> +maintainers:
> + - Mark Kettenis <kettenis@openbsd.org>
> +
> +description: |
> + The Apple PCIe host controller is a PCIe host controller with
> + multiple root ports present in Apple ARM SoC platforms, including
> + various iPhone and iPad devices and the "Apple Silicon" Macs.
> + The controller incorporates Synopsys DesigWare PCIe logic to
> + implements its root ports. But the ATU found on most DesignWare
> + PCIe host bridges is absent.
> +
> + All root ports share a single ECAM space, but separate GPIOs are
> + used to take the PCI devices on those ports out of reset. Therefore
> + the standard "reset-gpios" and "max-link-speed" properties appear on
> + the child nodes that represent the PCI bridges that correspond to
> + the individual root ports.
> +
> + MSIs are handled by the PCIe controller and translated into regular
> + interrupts. A range of 32 MSIs is provided. These 32 MSIs can be
> + distributed over the root ports as the OS sees fit by programming
> + the PCIe controller's port registers.
> +
> +allOf:
> + - $ref: /schemas/pci/pci-bus.yaml#
> + - $ref: ../interrupt-controller/msi-controller.yaml#
> +
> +properties:
> + compatible:
> + items:
> + - const: apple,t8103-pcie
> + - const: apple,pcie
> +
> + reg:
> + minItems: 3
> + maxItems: 5
> +
> + reg-names:
> + minItems: 3
> + maxItems: 5
> + items:
> + - const: config
> + - const: rc
> + - const: port0
> + - const: port1
> + - const: port2
> +
> + ranges:
> + minItems: 2
> + maxItems: 2
> +
> + interrupts:
> + description:
> + Interrupt specifiers, one for each root port.
> + minItems: 1
> + maxItems: 3
> +
> + msi-parent: true
I still think this should be dropped as it is meaningless with
'msi-controller' present.
> +
> +# msi-ranges:
> +# description:
> +# A list of pairs <intid span>, where "intid" is the first
> +# interrupt number that can be used as an MSI, and "span" the size
> +# of that range.
> +# $ref: /schemas/types.yaml#/definitions/phandle-array
Here, you'll want just 'maxItems: 1' as there's only 1 entry.
> +
> + iommu-map: true
> + iommu-map-mask: true
> +
> +required:
> + - compatible
> + - reg
> + - reg-names
> + - bus-range
> + - interrupts
> + - msi-controller
> + - msi-parent
> + - msi-ranges
> +
> +unevaluatedProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/interrupt-controller/apple-aic.h>
> +
> + soc {
> + #address-cells = <2>;
> + #size-cells = <2>;
> +
> + pcie0: pcie@690000000 {
> + compatible = "apple,t8103-pcie", "apple,pcie";
> + device_type = "pci";
> +
> + reg = <0x6 0x90000000 0x0 0x1000000>,
> + <0x6 0x80000000 0x0 0x4000>,
> + <0x6 0x81000000 0x0 0x8000>,
> + <0x6 0x82000000 0x0 0x8000>,
> + <0x6 0x83000000 0x0 0x8000>;
> + reg-names = "config", "rc", "port0", "port1", "port2";
> +
> + interrupt-parent = <&aic>;
> + interrupts = <AIC_IRQ 695 IRQ_TYPE_LEVEL_HIGH>,
> + <AIC_IRQ 698 IRQ_TYPE_LEVEL_HIGH>,
> + <AIC_IRQ 701 IRQ_TYPE_LEVEL_HIGH>;
> +
> + msi-controller;
> + msi-parent = <&pcie0>;
> + msi-ranges = <&aic AIC_IRQ 704 IRQ_TYPE_EDGE_RISING 32>;
> +
> + iommu-map = <0x100 &dart0 1 1>,
> + <0x200 &dart1 1 1>,
> + <0x300 &dart2 1 1>;
> + iommu-map-mask = <0xff00>;
> +
> + bus-range = <0 3>;
> + #address-cells = <3>;
> + #size-cells = <2>;
> + ranges = <0x43000000 0x6 0xa0000000 0x6 0xa0000000 0x0 0x20000000>,
> + <0x02000000 0x0 0xc0000000 0x6 0xc0000000 0x0 0x40000000>;
> +
> + clocks = <&pcie_core_clk>, <&pcie_aux_clk>, <&pcie_ref_clk>;
> + pinctrl-0 = <&pcie_pins>;
> + pinctrl-names = "default";
> +
> + pci@0,0 {
> + device_type = "pci";
> + reg = <0x0 0x0 0x0 0x0 0x0>;
> + reset-gpios = <&pinctrl_ap 152 0>;
> + max-link-speed = <2>;
> +
> + #address-cells = <3>;
> + #size-cells = <2>;
> + ranges;
> + };
> +
> + pci@1,0 {
> + device_type = "pci";
> + reg = <0x800 0x0 0x0 0x0 0x0>;
> + reset-gpios = <&pinctrl_ap 153 0>;
> + max-link-speed = <2>;
> +
> + #address-cells = <3>;
> + #size-cells = <2>;
> + ranges;
> + };
> +
> + pci@2,0 {
> + device_type = "pci";
> + reg = <0x1000 0x0 0x0 0x0 0x0>;
> + reset-gpios = <&pinctrl_ap 33 0>;
> + max-link-speed = <1>;
> +
> + #address-cells = <3>;
> + #size-cells = <2>;
> + ranges;
> + };
> + };
> + };
> diff --git a/MAINTAINERS b/MAINTAINERS
> index c6b8a720c0bc..30bea4042e7e 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -1694,6 +1694,7 @@ C: irc://chat.freenode.net/asahi-dev
> T: git https://github.com/AsahiLinux/linux.git
> F: Documentation/devicetree/bindings/arm/apple.yaml
> F: Documentation/devicetree/bindings/interrupt-controller/apple,aic.yaml
> +F: Documentation/devicetree/bindings/pci/apple,pcie.yaml
> F: Documentation/devicetree/bindings/pinctrl/apple,pinctrl.yaml
> F: arch/arm64/boot/dts/apple/
> F: drivers/irqchip/irq-apple-aic.c
> --
> 2.32.0
>
>
next prev parent reply other threads:[~2021-08-31 21:21 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-08-27 17:15 [PATCH v4 0/4] Apple M1 PCIe DT bindings Mark Kettenis
2021-08-27 17:15 ` [PATCH v4 1/4] dt-bindings: interrupt-controller: Convert MSI controller to json-schema Mark Kettenis
2021-08-27 19:15 ` Mark Kettenis
2021-08-31 21:04 ` Rob Herring
2021-08-31 20:57 ` Rob Herring
2021-09-01 10:56 ` Mark Kettenis
2021-08-31 20:58 ` Rob Herring
2021-08-27 17:15 ` [PATCH v4 2/4] dt-bindings: interrupt-controller: msi: Add msi-ranges property Mark Kettenis
2021-08-31 21:16 ` Rob Herring
2021-09-21 17:52 ` Mark Kettenis
2021-08-27 17:15 ` [PATCH v4 3/4] dt-bindings: pci: Add DT bindings for apple,pcie Mark Kettenis
2021-08-27 17:58 ` Alyssa Rosenzweig
2021-08-27 18:22 ` Mark Kettenis
2021-08-31 21:21 ` Rob Herring [this message]
2021-09-01 11:29 ` Mark Kettenis
2021-09-12 20:13 ` Marc Zyngier
2021-09-13 20:55 ` Rob Herring
2021-08-27 17:15 ` [PATCH v4 4/4] arm64: apple: Add PCIe node Mark Kettenis
2021-08-27 17:59 ` Alyssa Rosenzweig
2021-08-27 18:24 ` Mark Kettenis
2021-08-27 20:09 ` Alyssa Rosenzweig
2021-08-30 11:37 ` Marc Zyngier
2021-08-30 14:57 ` Mark Kettenis
2021-08-30 20:40 ` Marc Zyngier
2021-08-30 15:57 ` Rob Herring
2021-08-30 20:20 ` Marc Zyngier
2021-09-12 21:30 ` Marc Zyngier
2021-09-13 18:35 ` Mark Kettenis
2021-09-21 11:01 ` [PATCH v4 0/4] Apple M1 PCIe DT bindings Marc Zyngier
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=YS6dWI4wwg7XkuNA@robh.at.kernel.org \
--to=robh@kernel.org \
--cc=alyssa@rosenzweig.io \
--cc=bcm-kernel-feedback-list@broadcom.com \
--cc=bhelgaas@google.com \
--cc=daire.mcnamara@microchip.com \
--cc=devicetree@vger.kernel.org \
--cc=f.fainelli@gmail.com \
--cc=jim2101024@gmail.com \
--cc=kettenis@openbsd.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=linux-rpi-kernel@lists.infradead.org \
--cc=marcan@marcan.st \
--cc=mark.kettenis@xs4all.nl \
--cc=maz@kernel.org \
--cc=nsaenz@kernel.org \
--cc=nsaenzjulienne@suse.de \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).