linux-pci.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
To: Vinod Koul <vkoul@kernel.org>,
	Bjorn Helgaas <bhelgaas@google.com>,
	Rob Herring <robh@kernel.org>
Cc: linuxarm@huawei.com, mauro.chehab@huawei.com,
	"Mauro Carvalho Chehab" <mchehab+huawei@kernel.org>,
	"Krzysztof Wilczyński" <kw@linux.com>,
	"Binghui Wang" <wangbinghui@hisilicon.com>,
	"Lorenzo Pieralisi" <lorenzo.pieralisi@arm.com>,
	"Xiaowei Song" <songxiaowei@hisilicon.com>,
	linux-kernel@vger.kernel.org, linux-pci@vger.kernel.org
Subject: [PATCH v7 03/10] PCI: kirin: Use regmap for APB registers
Date: Wed, 21 Jul 2021 10:39:05 +0200	[thread overview]
Message-ID: <f94dfbe5e0d288bc23fde6ed362f1205e9a57b78.1626855713.git.mchehab+huawei@kernel.org> (raw)
In-Reply-To: <cover.1626855713.git.mchehab+huawei@kernel.org>

The PHY layer need to access APB registers too, for Kirin 970.
So, place them into a named regmap.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 drivers/pci/controller/dwc/pcie-kirin.c | 39 +++++++++++++++++--------
 1 file changed, 27 insertions(+), 12 deletions(-)

diff --git a/drivers/pci/controller/dwc/pcie-kirin.c b/drivers/pci/controller/dwc/pcie-kirin.c
index 31514a5d4bb4..5fe0cd0af572 100644
--- a/drivers/pci/controller/dwc/pcie-kirin.c
+++ b/drivers/pci/controller/dwc/pcie-kirin.c
@@ -61,8 +61,8 @@ struct kirin_pcie {
 	enum pcie_kirin_phy_type	type;
 
 	struct dw_pcie	*pci;
+	struct regmap   *apb;
 	struct phy	*phy;
-	void __iomem	*apb_base;
 	void		*phy_priv;	/* only for PCIE_KIRIN_INTERNAL_PHY */
 };
 
@@ -340,6 +340,13 @@ static int hi3660_pcie_phy_init(struct platform_device *pdev,
  * The non-PHY part starts here
  */
 
+static const struct regmap_config pcie_kirin_regmap_conf = {
+	.name = "kirin_pcie_apb",
+	.reg_bits = 32,
+	.val_bits = 32,
+	.reg_stride = 4,
+};
+
 /* Registers in PCIeCTRL */
 static inline void kirin_apb_ctrl_writel(struct kirin_pcie *kirin_pcie,
 					 u32 val, u32 reg)
@@ -355,10 +362,17 @@ static inline u32 kirin_apb_ctrl_readl(struct kirin_pcie *kirin_pcie, u32 reg)
 static long kirin_pcie_get_resource(struct kirin_pcie *kirin_pcie,
 				    struct platform_device *pdev)
 {
-	kirin_pcie->apb_base =
-		devm_platform_ioremap_resource_byname(pdev, "apb");
-	if (IS_ERR(kirin_pcie->apb_base))
-		return PTR_ERR(kirin_pcie->apb_base);
+	struct device *dev = &pdev->dev;
+	void __iomem *apb_base;
+
+	apb_base = devm_platform_ioremap_resource_byname(pdev, "apb");
+	if (IS_ERR(apb_base))
+		return PTR_ERR(apb_base);
+
+	kirin_pcie->apb = devm_regmap_init_mmio(dev, apb_base,
+						&pcie_kirin_regmap_conf);
+	if (IS_ERR(kirin_pcie->apb))
+		return PTR_ERR(kirin_pcie->apb);
 
 	return 0;
 }
@@ -368,13 +382,13 @@ static void kirin_pcie_sideband_dbi_w_mode(struct kirin_pcie *kirin_pcie,
 {
 	u32 val;
 
-	val = kirin_apb_ctrl_readl(kirin_pcie, SOC_PCIECTRL_CTRL0_ADDR);
+	regmap_read(kirin_pcie->apb, SOC_PCIECTRL_CTRL0_ADDR, &val);
 	if (on)
 		val = val | PCIE_ELBI_SLV_DBI_ENABLE;
 	else
 		val = val & ~PCIE_ELBI_SLV_DBI_ENABLE;
 
-	kirin_apb_ctrl_writel(kirin_pcie, val, SOC_PCIECTRL_CTRL0_ADDR);
+	regmap_write(kirin_pcie->apb, SOC_PCIECTRL_CTRL0_ADDR, val);
 }
 
 static void kirin_pcie_sideband_dbi_r_mode(struct kirin_pcie *kirin_pcie,
@@ -382,13 +396,13 @@ static void kirin_pcie_sideband_dbi_r_mode(struct kirin_pcie *kirin_pcie,
 {
 	u32 val;
 
-	val = kirin_apb_ctrl_readl(kirin_pcie, SOC_PCIECTRL_CTRL1_ADDR);
+	regmap_read(kirin_pcie->apb, SOC_PCIECTRL_CTRL1_ADDR, &val);
 	if (on)
 		val = val | PCIE_ELBI_SLV_DBI_ENABLE;
 	else
 		val = val & ~PCIE_ELBI_SLV_DBI_ENABLE;
 
-	kirin_apb_ctrl_writel(kirin_pcie, val, SOC_PCIECTRL_CTRL1_ADDR);
+	regmap_write(kirin_pcie->apb, SOC_PCIECTRL_CTRL1_ADDR, val);
 }
 
 static int kirin_pcie_rd_own_conf(struct pci_bus *bus, unsigned int devfn,
@@ -448,8 +462,9 @@ static void kirin_pcie_write_dbi(struct dw_pcie *pci, void __iomem *base,
 static int kirin_pcie_link_up(struct dw_pcie *pci)
 {
 	struct kirin_pcie *kirin_pcie = to_kirin_pcie(pci);
-	u32 val = kirin_apb_ctrl_readl(kirin_pcie, PCIE_APB_PHY_STATUS0);
+	u32 val;
 
+	regmap_read(kirin_pcie->apb, PCIE_APB_PHY_STATUS0, &val);
 	if ((val & PCIE_LINKUP_ENABLE) == PCIE_LINKUP_ENABLE)
 		return 1;
 
@@ -461,8 +476,8 @@ static int kirin_pcie_start_link(struct dw_pcie *pci)
 	struct kirin_pcie *kirin_pcie = to_kirin_pcie(pci);
 
 	/* assert LTSSM enable */
-	kirin_apb_ctrl_writel(kirin_pcie, PCIE_LTSSM_ENABLE_BIT,
-			      PCIE_APP_LTSSM_ENABLE);
+	regmap_write(kirin_pcie->apb, PCIE_APP_LTSSM_ENABLE,
+		     PCIE_LTSSM_ENABLE_BIT);
 
 	return 0;
 }
-- 
2.31.1


  parent reply	other threads:[~2021-07-21  9:00 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-07-21  8:39 [PATCH v7 00/10] Add support for Hikey 970 PCIe Mauro Carvalho Chehab
2021-07-21  8:39 ` [PATCH v7 01/10] PCI: kirin: Reorganize the PHY logic inside the driver Mauro Carvalho Chehab
2021-07-21  8:39 ` [PATCH v7 02/10] PCI: kirin: Add support for a PHY layer Mauro Carvalho Chehab
2021-07-21  8:39 ` Mauro Carvalho Chehab [this message]
2021-07-21  8:39 ` [PATCH v7 04/10] PCI: kirin: Add MODULE_* macros Mauro Carvalho Chehab
2021-07-21  8:39 ` [PATCH v7 05/10] dt-bindings: PCI: kirin: Fix compatible string Mauro Carvalho Chehab
2021-07-21  8:39 ` [PATCH v7 07/10] phy: HiSilicon: Add driver for Kirin 970 PCIe PHY Mauro Carvalho Chehab
2021-07-21  8:39 ` [PATCH v7 08/10] arm64: dts: HiSilicon: Add support for HiKey 970 PCIe controller hardware Mauro Carvalho Chehab
2021-07-22 13:36   ` Manivannan Sadhasivam
2021-07-23  6:53     ` Mauro Carvalho Chehab
2021-07-24  4:11       ` Manivannan Sadhasivam
2021-08-03  4:25         ` Mauro Carvalho Chehab
2021-08-16 18:26   ` Rob Herring
2021-07-21  8:39 ` [PATCH v7 09/10] dt-bindings: PCI: kirin-pcie.txt: Convert it to yaml Mauro Carvalho Chehab
2021-07-23 22:56   ` Rob Herring
2021-07-21 10:15 ` [PATCH v7 11/10] PCI: kirin: Allow building it as a module Mauro Carvalho Chehab
2021-07-21 11:55   ` Arnd Bergmann
2021-07-21 13:10     ` Mauro Carvalho Chehab

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=f94dfbe5e0d288bc23fde6ed362f1205e9a57b78.1626855713.git.mchehab+huawei@kernel.org \
    --to=mchehab+huawei@kernel.org \
    --cc=bhelgaas@google.com \
    --cc=kw@linux.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=linuxarm@huawei.com \
    --cc=lorenzo.pieralisi@arm.com \
    --cc=mauro.chehab@huawei.com \
    --cc=robh@kernel.org \
    --cc=songxiaowei@hisilicon.com \
    --cc=vkoul@kernel.org \
    --cc=wangbinghui@hisilicon.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).