linux-pci.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* v5.10-rc2 kernel unable to initialize RK3399 pcie root complex
@ 2020-11-04 12:16 Qu Wenruo
  0 siblings, 0 replies; only message in thread
From: Qu Wenruo @ 2020-11-04 12:16 UTC (permalink / raw)
  To: linux-arm-kernel, Linux Kernel Mailing List, linux-pci

Hi,

Recently I tried to run v5.10-rc2 kernel on my RK3399 board (Rock Pi 4B,
4G ram version), most drivers work, but the PCIE RC of the board fails
to register, without obvious dmesg error.


My previous v5.9 kernel runs pretty fine on that board, and can boot
from root on LVM on NVME device without any problem.

But for v5.10-rc2 kernel, the root complex just refuses to initialize.
Although the rockchip pcie seems to be detected, but no PCIE bus added
at all.

Also tried to add CONFIG_PCI_DEBUG, but still no pci related dmesg
except the rockchip pcie controller trying to initialize.

Manjaro ARM's linux-rc kernel has the same problem too, so it doesn't
seem to be a bug in my kernel config.

For the dmesg extracted from initramfs:
https://gist.github.com/adam900710/0415c1f19c07f65f892eeb848fd8dfbe


Is there any known bug related to pci to cause such problem?

Thanks,
Qu


^ permalink raw reply	[flat|nested] only message in thread

only message in thread, other threads:[~2020-11-04 12:17 UTC | newest]

Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-11-04 12:16 v5.10-rc2 kernel unable to initialize RK3399 pcie root complex Qu Wenruo

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).