* Re: [PATCH 1/3] dt-bindings: phy: convert Broadcom NS USB 2.0 to the json-schema
[not found] <20210226114501.31086-1-zajec5@gmail.com>
@ 2021-03-05 17:24 ` Rafał Miłecki
[not found] ` <20210226114501.31086-3-zajec5@gmail.com>
` (2 subsequent siblings)
3 siblings, 0 replies; 6+ messages in thread
From: Rafał Miłecki @ 2021-03-05 17:24 UTC (permalink / raw)
To: Kishon Vijay Abraham I, Vinod Koul, Rob Herring
Cc: linux-kernel, devicetree, Florian Fainelli, Vivek Unune,
bcm-kernel-feedback-list, Rafał Miłecki, linux-phy
Cc linux-phy@
On 26.02.2021 12:44, Rafał Miłecki wrote:
> From: Rafał Miłecki <rafal@milecki.pl>
>
> Minor example fixes:
> 1. Include bcm-nsp.h
> 2. Add address to the node name
>
> Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
> ---
> This has been verified using dt_binding_check
> ---
> .../bindings/phy/bcm-ns-usb2-phy.txt | 21 -------
> .../bindings/phy/brcm,ns-usb2-phy.yaml | 55 +++++++++++++++++++
> 2 files changed, 55 insertions(+), 21 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/phy/bcm-ns-usb2-phy.txt
> create mode 100644 Documentation/devicetree/bindings/phy/brcm,ns-usb2-phy.yaml
>
> diff --git a/Documentation/devicetree/bindings/phy/bcm-ns-usb2-phy.txt b/Documentation/devicetree/bindings/phy/bcm-ns-usb2-phy.txt
> deleted file mode 100644
> index a7aee9ea8926..000000000000
> --- a/Documentation/devicetree/bindings/phy/bcm-ns-usb2-phy.txt
> +++ /dev/null
> @@ -1,21 +0,0 @@
> -Driver for Broadcom Northstar USB 2.0 PHY
> -
> -Required properties:
> -- compatible: brcm,ns-usb2-phy
> -- reg: iomem address range of DMU (Device Management Unit)
> -- reg-names: "dmu", the only needed & supported reg right now
> -- clocks: USB PHY reference clock
> -- clock-names: "phy-ref-clk", the only needed & supported clock right now
> -
> -To initialize USB 2.0 PHY driver needs to setup PLL correctly. To do this it
> -requires passing phandle to the USB PHY reference clock.
> -
> -Example:
> - usb2-phy {
> - compatible = "brcm,ns-usb2-phy";
> - reg = <0x1800c000 0x1000>;
> - reg-names = "dmu";
> - #phy-cells = <0>;
> - clocks = <&genpll BCM_NSP_GENPLL_USB_PHY_REF_CLK>;
> - clock-names = "phy-ref-clk";
> - };
> diff --git a/Documentation/devicetree/bindings/phy/brcm,ns-usb2-phy.yaml b/Documentation/devicetree/bindings/phy/brcm,ns-usb2-phy.yaml
> new file mode 100644
> index 000000000000..b8b683ce8fa9
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/phy/brcm,ns-usb2-phy.yaml
> @@ -0,0 +1,55 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/phy/brcm,ns-usb2-phy.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Broadcom Northstar USB 2.0 PHY
> +
> +description: Broadcom's USB 2.0 PHY integrated into Northstar family SoCs
> +
> +maintainers:
> + - Rafał Miłecki <rafal@milecki.pl>
> +
> +properties:
> + compatible:
> + const: brcm,ns-usb2-phy
> +
> + reg:
> + maxItems: 1
> + description: DMU (Device Management Unit) address range
> +
> + reg-names:
> + const: dmu
> +
> + clocks:
> + maxItems: 1
> + description: USB PHY reference clock
> +
> + clock-names:
> + const: phy-ref-clk
> +
> + "#phy-cells":
> + const: 0
> +
> +required:
> + - reg
> + - reg-names
> + - clocks
> + - clock-names
> + - "#phy-cells"
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/clock/bcm-nsp.h>
> +
> + usb2-phy@1800c000 {
> + compatible = "brcm,ns-usb2-phy";
> + reg = <0x1800c000 0x1000>;
> + reg-names = "dmu";
> + clocks = <&genpll BCM_NSP_GENPLL_USB_PHY_REF_CLK>;
> + clock-names = "phy-ref-clk";
> + #phy-cells = <0>;
> + };
>
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH 2/3] dt-bindings: phy: brcm,ns-usb2-phy: bind single CRU reg
[not found] ` <20210226114501.31086-2-zajec5@gmail.com>
@ 2021-03-05 17:24 ` Rafał Miłecki
2021-03-05 21:50 ` Rafał Miłecki
1 sibling, 0 replies; 6+ messages in thread
From: Rafał Miłecki @ 2021-03-05 17:24 UTC (permalink / raw)
To: Kishon Vijay Abraham I, Vinod Koul, Rob Herring
Cc: linux-kernel, devicetree, Florian Fainelli, Vivek Unune,
bcm-kernel-feedback-list, Rafał Miłecki, linux-phy
Cc linux-phy@
On 26.02.2021 12:45, Rafał Miłecki wrote:
> From: Rafał Miłecki <rafal@milecki.pl>
>
> The old binding was using whole DMU space. It was an overkill. DMU is a
> big block which contains e.g. CRU which contains e.g. PLLs, PHY, pinctrl
> and thermal blocks.
>
> Rework the binding to directly use a single CRU register that controls
> USB 2.0 PHY. It's still required to reference CRU generic clkset
> register so add a syscon for that.
>
> For a full DMU & CRU description see arch/arm/boot/dts/bcm5301x.dtsi .
>
> The old binding is deprecated now.
>
> Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
> ---
> This has been verified using dt_binding_check
>
> I'd really like to get Rob's ack to make sure I don't do anything stupid
>
> It's a reworked version of my abonded 2019 patch:
> [PATCH V2 1/2] dt-bindings: bcm-ns-usb2-phy: rework binding to use CRU syscon
> https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20190108123907.19816-1-zajec5@gmail.com/
> ---
> .../bindings/phy/brcm,ns-usb2-phy.yaml | 46 +++++++++++++++----
> 1 file changed, 36 insertions(+), 10 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/phy/brcm,ns-usb2-phy.yaml b/Documentation/devicetree/bindings/phy/brcm,ns-usb2-phy.yaml
> index b8b683ce8fa9..8e056d4d205a 100644
> --- a/Documentation/devicetree/bindings/phy/brcm,ns-usb2-phy.yaml
> +++ b/Documentation/devicetree/bindings/phy/brcm,ns-usb2-phy.yaml
> @@ -16,11 +16,20 @@ properties:
> const: brcm,ns-usb2-phy
>
> reg:
> - maxItems: 1
> - description: DMU (Device Management Unit) address range
> + anyOf:
> + - maxItems: 1
> + description: PHY control register
> + - maxItems: 1
> + description: DMU (Device Management Unit) address range
> + deprecated: true
>
> reg-names:
> const: dmu
> + deprecated: true
> +
> + brcm,syscon-clkset:
> + description: phandle to syscon for clkset register
> + $ref: /schemas/types.yaml#/definitions/phandle
>
> clocks:
> maxItems: 1
> @@ -34,22 +43,39 @@ properties:
>
> required:
> - reg
> - - reg-names
> - clocks
> - clock-names
> - "#phy-cells"
>
> +oneOf:
> + - required:
> + - brcm,syscon-clkset
> + - required:
> + - reg-names
> +
> additionalProperties: false
>
> examples:
> - |
> #include <dt-bindings/clock/bcm-nsp.h>
>
> - usb2-phy@1800c000 {
> - compatible = "brcm,ns-usb2-phy";
> - reg = <0x1800c000 0x1000>;
> - reg-names = "dmu";
> - clocks = <&genpll BCM_NSP_GENPLL_USB_PHY_REF_CLK>;
> - clock-names = "phy-ref-clk";
> - #phy-cells = <0>;
> + cru-bus@1800c100 {
> + compatible = "simple-bus";
> + ranges = <0 0x1800c100 0x1a4>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> +
> + usb2-phy@64 {
> + compatible = "brcm,ns-usb2-phy";
> + reg = <0x64 0x4>;
> + brcm,syscon-clkset = <&clkset>;
> + clocks = <&genpll BCM_NSP_GENPLL_USB_PHY_REF_CLK>;
> + clock-names = "phy-ref-clk";
> + #phy-cells = <0>;
> + };
> +
> + clkset: syscon@80 {
> + compatible = "brcm,cru-clkset", "syscon";
> + reg = <0x80 0x4>;
> + };
> };
>
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH 3/3] phy: bcm-ns-usb2: support updated single CRU reg DT binding
[not found] ` <20210226114501.31086-3-zajec5@gmail.com>
@ 2021-03-05 17:25 ` Rafał Miłecki
2021-03-05 21:50 ` Rafał Miłecki
1 sibling, 0 replies; 6+ messages in thread
From: Rafał Miłecki @ 2021-03-05 17:25 UTC (permalink / raw)
To: Kishon Vijay Abraham I, Vinod Koul, Rob Herring
Cc: linux-kernel, devicetree, Florian Fainelli, Vivek Unune,
bcm-kernel-feedback-list, Rafał Miłecki, linux-phy
Cc linux-phy@
On 26.02.2021 12:45, Rafał Miłecki wrote:
> From: Rafał Miłecki <rafal@milecki.pl>
>
> Updated DT binding maps a single CRU register that is directly used for
> the PHY control. Accessing common CRU reg is handled using syscon &
> regmap.
>
> The old binding has been deprecated and stays as a fallback method.
>
> Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
> ---
> It's a reworked version of my abonded 2019 patch:
> [PATCH V2 2/2] phy: bcm-ns-usb2: support updated DT binding with the CRU syscon
> https://lore.kernel.org/patchwork/patch/1029863/
> ---
> drivers/phy/broadcom/phy-bcm-ns-usb2.c | 52 +++++++++++++++++++++-----
> 1 file changed, 43 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/phy/broadcom/phy-bcm-ns-usb2.c b/drivers/phy/broadcom/phy-bcm-ns-usb2.c
> index 4b015b8a71c3..98d32729a45d 100644
> --- a/drivers/phy/broadcom/phy-bcm-ns-usb2.c
> +++ b/drivers/phy/broadcom/phy-bcm-ns-usb2.c
> @@ -9,17 +9,23 @@
> #include <linux/clk.h>
> #include <linux/delay.h>
> #include <linux/err.h>
> +#include <linux/mfd/syscon.h>
> #include <linux/module.h>
> #include <linux/of_address.h>
> #include <linux/of_platform.h>
> #include <linux/phy/phy.h>
> #include <linux/platform_device.h>
> +#include <linux/regmap.h>
> #include <linux/slab.h>
>
> struct bcm_ns_usb2 {
> struct device *dev;
> struct clk *ref_clk;
> struct phy *phy;
> + struct regmap *clkset;
> + void __iomem *base;
> +
> + /* Deprecated binding */
> void __iomem *dmu;
> };
>
> @@ -27,7 +33,6 @@ static int bcm_ns_usb2_phy_init(struct phy *phy)
> {
> struct bcm_ns_usb2 *usb2 = phy_get_drvdata(phy);
> struct device *dev = usb2->dev;
> - void __iomem *dmu = usb2->dmu;
> u32 ref_clk_rate, usb2ctl, usb_pll_ndiv, usb_pll_pdiv;
> int err = 0;
>
> @@ -44,7 +49,10 @@ static int bcm_ns_usb2_phy_init(struct phy *phy)
> goto err_clk_off;
> }
>
> - usb2ctl = readl(dmu + BCMA_DMU_CRU_USB2_CONTROL);
> + if (usb2->base)
> + usb2ctl = readl(usb2->base);
> + else
> + usb2ctl = readl(usb2->dmu + BCMA_DMU_CRU_USB2_CONTROL);
>
> if (usb2ctl & BCMA_DMU_CRU_USB2_CONTROL_USB_PLL_PDIV_MASK) {
> usb_pll_pdiv = usb2ctl;
> @@ -58,15 +66,24 @@ static int bcm_ns_usb2_phy_init(struct phy *phy)
> usb_pll_ndiv = (1920000000 * usb_pll_pdiv) / ref_clk_rate;
>
> /* Unlock DMU PLL settings with some magic value */
> - writel(0x0000ea68, dmu + BCMA_DMU_CRU_CLKSET_KEY);
> + if (usb2->clkset)
> + regmap_write(usb2->clkset, 0, 0x0000ea68);
> + else
> + writel(0x0000ea68, usb2->dmu + BCMA_DMU_CRU_CLKSET_KEY);
>
> /* Write USB 2.0 PLL control setting */
> usb2ctl &= ~BCMA_DMU_CRU_USB2_CONTROL_USB_PLL_NDIV_MASK;
> usb2ctl |= usb_pll_ndiv << BCMA_DMU_CRU_USB2_CONTROL_USB_PLL_NDIV_SHIFT;
> - writel(usb2ctl, dmu + BCMA_DMU_CRU_USB2_CONTROL);
> + if (usb2->base)
> + writel(usb2ctl, usb2->base);
> + else
> + writel(usb2ctl, usb2->dmu + BCMA_DMU_CRU_USB2_CONTROL);
>
> /* Lock DMU PLL settings */
> - writel(0x00000000, dmu + BCMA_DMU_CRU_CLKSET_KEY);
> + if (usb2->clkset)
> + regmap_write(usb2->clkset, 0, 0x00000000);
> + else
> + writel(0x00000000, usb2->dmu + BCMA_DMU_CRU_CLKSET_KEY);
>
> err_clk_off:
> clk_disable_unprepare(usb2->ref_clk);
> @@ -90,10 +107,27 @@ static int bcm_ns_usb2_probe(struct platform_device *pdev)
> return -ENOMEM;
> usb2->dev = dev;
>
> - usb2->dmu = devm_platform_ioremap_resource_byname(pdev, "dmu");
> - if (IS_ERR(usb2->dmu)) {
> - dev_err(dev, "Failed to map DMU regs\n");
> - return PTR_ERR(usb2->dmu);
> + if (of_find_property(dev->of_node, "brcm,syscon-clkset", NULL)) {
> + usb2->base = devm_platform_ioremap_resource(pdev, 0);
> + if (IS_ERR(usb2->base)) {
> + dev_err(dev, "Failed to map control reg\n");
> + return PTR_ERR(usb2->base);
> + }
> +
> + usb2->clkset = syscon_regmap_lookup_by_phandle(dev->of_node,
> + "brcm,syscon-clkset");
> + if (IS_ERR(usb2->clkset)) {
> + dev_err(dev, "Failed to lookup clkset regmap\n");
> + return PTR_ERR(usb2->clkset);
> + }
> + } else {
> + usb2->dmu = devm_platform_ioremap_resource_byname(pdev, "dmu");
> + if (IS_ERR(usb2->dmu)) {
> + dev_err(dev, "Failed to map DMU regs\n");
> + return PTR_ERR(usb2->dmu);
> + }
> +
> + dev_warn(dev, "using deprecated DT binding\n");
> }
>
> usb2->ref_clk = devm_clk_get(dev, "phy-ref-clk");
>
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH 1/3] dt-bindings: phy: convert Broadcom NS USB 2.0 to the json-schema
[not found] <20210226114501.31086-1-zajec5@gmail.com>
2021-03-05 17:24 ` [PATCH 1/3] dt-bindings: phy: convert Broadcom NS USB 2.0 to the json-schema Rafał Miłecki
[not found] ` <20210226114501.31086-3-zajec5@gmail.com>
@ 2021-03-05 21:48 ` Rafał Miłecki
[not found] ` <20210226114501.31086-2-zajec5@gmail.com>
3 siblings, 0 replies; 6+ messages in thread
From: Rafał Miłecki @ 2021-03-05 21:48 UTC (permalink / raw)
To: Kishon Vijay Abraham I, Vinod Koul, Rob Herring
Cc: linux-kernel, devicetree, Florian Fainelli, Vivek Unune,
bcm-kernel-feedback-list, Rafał Miłecki, linux-phy
Cc linux-phy@ again (after fixing recipients limit)
On 26.02.2021 12:44, Rafał Miłecki wrote:
> From: Rafał Miłecki <rafal@milecki.pl>
>
> Minor example fixes:
> 1. Include bcm-nsp.h
> 2. Add address to the node name
>
> Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
> ---
> This has been verified using dt_binding_check
> ---
> .../bindings/phy/bcm-ns-usb2-phy.txt | 21 -------
> .../bindings/phy/brcm,ns-usb2-phy.yaml | 55 +++++++++++++++++++
> 2 files changed, 55 insertions(+), 21 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/phy/bcm-ns-usb2-phy.txt
> create mode 100644 Documentation/devicetree/bindings/phy/brcm,ns-usb2-phy.yaml
>
> diff --git a/Documentation/devicetree/bindings/phy/bcm-ns-usb2-phy.txt b/Documentation/devicetree/bindings/phy/bcm-ns-usb2-phy.txt
> deleted file mode 100644
> index a7aee9ea8926..000000000000
> --- a/Documentation/devicetree/bindings/phy/bcm-ns-usb2-phy.txt
> +++ /dev/null
> @@ -1,21 +0,0 @@
> -Driver for Broadcom Northstar USB 2.0 PHY
> -
> -Required properties:
> -- compatible: brcm,ns-usb2-phy
> -- reg: iomem address range of DMU (Device Management Unit)
> -- reg-names: "dmu", the only needed & supported reg right now
> -- clocks: USB PHY reference clock
> -- clock-names: "phy-ref-clk", the only needed & supported clock right now
> -
> -To initialize USB 2.0 PHY driver needs to setup PLL correctly. To do this it
> -requires passing phandle to the USB PHY reference clock.
> -
> -Example:
> - usb2-phy {
> - compatible = "brcm,ns-usb2-phy";
> - reg = <0x1800c000 0x1000>;
> - reg-names = "dmu";
> - #phy-cells = <0>;
> - clocks = <&genpll BCM_NSP_GENPLL_USB_PHY_REF_CLK>;
> - clock-names = "phy-ref-clk";
> - };
> diff --git a/Documentation/devicetree/bindings/phy/brcm,ns-usb2-phy.yaml b/Documentation/devicetree/bindings/phy/brcm,ns-usb2-phy.yaml
> new file mode 100644
> index 000000000000..b8b683ce8fa9
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/phy/brcm,ns-usb2-phy.yaml
> @@ -0,0 +1,55 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/phy/brcm,ns-usb2-phy.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Broadcom Northstar USB 2.0 PHY
> +
> +description: Broadcom's USB 2.0 PHY integrated into Northstar family SoCs
> +
> +maintainers:
> + - Rafał Miłecki <rafal@milecki.pl>
> +
> +properties:
> + compatible:
> + const: brcm,ns-usb2-phy
> +
> + reg:
> + maxItems: 1
> + description: DMU (Device Management Unit) address range
> +
> + reg-names:
> + const: dmu
> +
> + clocks:
> + maxItems: 1
> + description: USB PHY reference clock
> +
> + clock-names:
> + const: phy-ref-clk
> +
> + "#phy-cells":
> + const: 0
> +
> +required:
> + - reg
> + - reg-names
> + - clocks
> + - clock-names
> + - "#phy-cells"
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/clock/bcm-nsp.h>
> +
> + usb2-phy@1800c000 {
> + compatible = "brcm,ns-usb2-phy";
> + reg = <0x1800c000 0x1000>;
> + reg-names = "dmu";
> + clocks = <&genpll BCM_NSP_GENPLL_USB_PHY_REF_CLK>;
> + clock-names = "phy-ref-clk";
> + #phy-cells = <0>;
> + };
>
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH 2/3] dt-bindings: phy: brcm,ns-usb2-phy: bind single CRU reg
[not found] ` <20210226114501.31086-2-zajec5@gmail.com>
2021-03-05 17:24 ` [PATCH 2/3] dt-bindings: phy: brcm,ns-usb2-phy: bind single CRU reg Rafał Miłecki
@ 2021-03-05 21:50 ` Rafał Miłecki
1 sibling, 0 replies; 6+ messages in thread
From: Rafał Miłecki @ 2021-03-05 21:50 UTC (permalink / raw)
To: Kishon Vijay Abraham I, Vinod Koul, Rob Herring
Cc: linux-kernel, devicetree, Florian Fainelli, Vivek Unune,
bcm-kernel-feedback-list, Rafał Miłecki, linux-phy
Cc linux-phy@ again (after fixing recipients ML limit)
On 26.02.2021 12:45, Rafał Miłecki wrote:
> From: Rafał Miłecki <rafal@milecki.pl>
>
> The old binding was using whole DMU space. It was an overkill. DMU is a
> big block which contains e.g. CRU which contains e.g. PLLs, PHY, pinctrl
> and thermal blocks.
>
> Rework the binding to directly use a single CRU register that controls
> USB 2.0 PHY. It's still required to reference CRU generic clkset
> register so add a syscon for that.
>
> For a full DMU & CRU description see arch/arm/boot/dts/bcm5301x.dtsi .
>
> The old binding is deprecated now.
>
> Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
> ---
> This has been verified using dt_binding_check
>
> I'd really like to get Rob's ack to make sure I don't do anything stupid
>
> It's a reworked version of my abonded 2019 patch:
> [PATCH V2 1/2] dt-bindings: bcm-ns-usb2-phy: rework binding to use CRU syscon
> https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20190108123907.19816-1-zajec5@gmail.com/
> ---
> .../bindings/phy/brcm,ns-usb2-phy.yaml | 46 +++++++++++++++----
> 1 file changed, 36 insertions(+), 10 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/phy/brcm,ns-usb2-phy.yaml b/Documentation/devicetree/bindings/phy/brcm,ns-usb2-phy.yaml
> index b8b683ce8fa9..8e056d4d205a 100644
> --- a/Documentation/devicetree/bindings/phy/brcm,ns-usb2-phy.yaml
> +++ b/Documentation/devicetree/bindings/phy/brcm,ns-usb2-phy.yaml
> @@ -16,11 +16,20 @@ properties:
> const: brcm,ns-usb2-phy
>
> reg:
> - maxItems: 1
> - description: DMU (Device Management Unit) address range
> + anyOf:
> + - maxItems: 1
> + description: PHY control register
> + - maxItems: 1
> + description: DMU (Device Management Unit) address range
> + deprecated: true
>
> reg-names:
> const: dmu
> + deprecated: true
> +
> + brcm,syscon-clkset:
> + description: phandle to syscon for clkset register
> + $ref: /schemas/types.yaml#/definitions/phandle
>
> clocks:
> maxItems: 1
> @@ -34,22 +43,39 @@ properties:
>
> required:
> - reg
> - - reg-names
> - clocks
> - clock-names
> - "#phy-cells"
>
> +oneOf:
> + - required:
> + - brcm,syscon-clkset
> + - required:
> + - reg-names
> +
> additionalProperties: false
>
> examples:
> - |
> #include <dt-bindings/clock/bcm-nsp.h>
>
> - usb2-phy@1800c000 {
> - compatible = "brcm,ns-usb2-phy";
> - reg = <0x1800c000 0x1000>;
> - reg-names = "dmu";
> - clocks = <&genpll BCM_NSP_GENPLL_USB_PHY_REF_CLK>;
> - clock-names = "phy-ref-clk";
> - #phy-cells = <0>;
> + cru-bus@1800c100 {
> + compatible = "simple-bus";
> + ranges = <0 0x1800c100 0x1a4>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> +
> + usb2-phy@64 {
> + compatible = "brcm,ns-usb2-phy";
> + reg = <0x64 0x4>;
> + brcm,syscon-clkset = <&clkset>;
> + clocks = <&genpll BCM_NSP_GENPLL_USB_PHY_REF_CLK>;
> + clock-names = "phy-ref-clk";
> + #phy-cells = <0>;
> + };
> +
> + clkset: syscon@80 {
> + compatible = "brcm,cru-clkset", "syscon";
> + reg = <0x80 0x4>;
> + };
> };
>
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH 3/3] phy: bcm-ns-usb2: support updated single CRU reg DT binding
[not found] ` <20210226114501.31086-3-zajec5@gmail.com>
2021-03-05 17:25 ` [PATCH 3/3] phy: bcm-ns-usb2: support updated single CRU reg DT binding Rafał Miłecki
@ 2021-03-05 21:50 ` Rafał Miłecki
1 sibling, 0 replies; 6+ messages in thread
From: Rafał Miłecki @ 2021-03-05 21:50 UTC (permalink / raw)
To: Kishon Vijay Abraham I, Vinod Koul, Rob Herring
Cc: linux-kernel, devicetree, Florian Fainelli, Vivek Unune,
bcm-kernel-feedback-list, Rafał Miłecki, linux-phy
Cc linux-phy@ again (after fixing recipients ML limit)
On 26.02.2021 12:45, Rafał Miłecki wrote:
> From: Rafał Miłecki <rafal@milecki.pl>
>
> Updated DT binding maps a single CRU register that is directly used for
> the PHY control. Accessing common CRU reg is handled using syscon &
> regmap.
>
> The old binding has been deprecated and stays as a fallback method.
>
> Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
> ---
> It's a reworked version of my abonded 2019 patch:
> [PATCH V2 2/2] phy: bcm-ns-usb2: support updated DT binding with the CRU syscon
> https://lore.kernel.org/patchwork/patch/1029863/
> ---
> drivers/phy/broadcom/phy-bcm-ns-usb2.c | 52 +++++++++++++++++++++-----
> 1 file changed, 43 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/phy/broadcom/phy-bcm-ns-usb2.c b/drivers/phy/broadcom/phy-bcm-ns-usb2.c
> index 4b015b8a71c3..98d32729a45d 100644
> --- a/drivers/phy/broadcom/phy-bcm-ns-usb2.c
> +++ b/drivers/phy/broadcom/phy-bcm-ns-usb2.c
> @@ -9,17 +9,23 @@
> #include <linux/clk.h>
> #include <linux/delay.h>
> #include <linux/err.h>
> +#include <linux/mfd/syscon.h>
> #include <linux/module.h>
> #include <linux/of_address.h>
> #include <linux/of_platform.h>
> #include <linux/phy/phy.h>
> #include <linux/platform_device.h>
> +#include <linux/regmap.h>
> #include <linux/slab.h>
>
> struct bcm_ns_usb2 {
> struct device *dev;
> struct clk *ref_clk;
> struct phy *phy;
> + struct regmap *clkset;
> + void __iomem *base;
> +
> + /* Deprecated binding */
> void __iomem *dmu;
> };
>
> @@ -27,7 +33,6 @@ static int bcm_ns_usb2_phy_init(struct phy *phy)
> {
> struct bcm_ns_usb2 *usb2 = phy_get_drvdata(phy);
> struct device *dev = usb2->dev;
> - void __iomem *dmu = usb2->dmu;
> u32 ref_clk_rate, usb2ctl, usb_pll_ndiv, usb_pll_pdiv;
> int err = 0;
>
> @@ -44,7 +49,10 @@ static int bcm_ns_usb2_phy_init(struct phy *phy)
> goto err_clk_off;
> }
>
> - usb2ctl = readl(dmu + BCMA_DMU_CRU_USB2_CONTROL);
> + if (usb2->base)
> + usb2ctl = readl(usb2->base);
> + else
> + usb2ctl = readl(usb2->dmu + BCMA_DMU_CRU_USB2_CONTROL);
>
> if (usb2ctl & BCMA_DMU_CRU_USB2_CONTROL_USB_PLL_PDIV_MASK) {
> usb_pll_pdiv = usb2ctl;
> @@ -58,15 +66,24 @@ static int bcm_ns_usb2_phy_init(struct phy *phy)
> usb_pll_ndiv = (1920000000 * usb_pll_pdiv) / ref_clk_rate;
>
> /* Unlock DMU PLL settings with some magic value */
> - writel(0x0000ea68, dmu + BCMA_DMU_CRU_CLKSET_KEY);
> + if (usb2->clkset)
> + regmap_write(usb2->clkset, 0, 0x0000ea68);
> + else
> + writel(0x0000ea68, usb2->dmu + BCMA_DMU_CRU_CLKSET_KEY);
>
> /* Write USB 2.0 PLL control setting */
> usb2ctl &= ~BCMA_DMU_CRU_USB2_CONTROL_USB_PLL_NDIV_MASK;
> usb2ctl |= usb_pll_ndiv << BCMA_DMU_CRU_USB2_CONTROL_USB_PLL_NDIV_SHIFT;
> - writel(usb2ctl, dmu + BCMA_DMU_CRU_USB2_CONTROL);
> + if (usb2->base)
> + writel(usb2ctl, usb2->base);
> + else
> + writel(usb2ctl, usb2->dmu + BCMA_DMU_CRU_USB2_CONTROL);
>
> /* Lock DMU PLL settings */
> - writel(0x00000000, dmu + BCMA_DMU_CRU_CLKSET_KEY);
> + if (usb2->clkset)
> + regmap_write(usb2->clkset, 0, 0x00000000);
> + else
> + writel(0x00000000, usb2->dmu + BCMA_DMU_CRU_CLKSET_KEY);
>
> err_clk_off:
> clk_disable_unprepare(usb2->ref_clk);
> @@ -90,10 +107,27 @@ static int bcm_ns_usb2_probe(struct platform_device *pdev)
> return -ENOMEM;
> usb2->dev = dev;
>
> - usb2->dmu = devm_platform_ioremap_resource_byname(pdev, "dmu");
> - if (IS_ERR(usb2->dmu)) {
> - dev_err(dev, "Failed to map DMU regs\n");
> - return PTR_ERR(usb2->dmu);
> + if (of_find_property(dev->of_node, "brcm,syscon-clkset", NULL)) {
> + usb2->base = devm_platform_ioremap_resource(pdev, 0);
> + if (IS_ERR(usb2->base)) {
> + dev_err(dev, "Failed to map control reg\n");
> + return PTR_ERR(usb2->base);
> + }
> +
> + usb2->clkset = syscon_regmap_lookup_by_phandle(dev->of_node,
> + "brcm,syscon-clkset");
> + if (IS_ERR(usb2->clkset)) {
> + dev_err(dev, "Failed to lookup clkset regmap\n");
> + return PTR_ERR(usb2->clkset);
> + }
> + } else {
> + usb2->dmu = devm_platform_ioremap_resource_byname(pdev, "dmu");
> + if (IS_ERR(usb2->dmu)) {
> + dev_err(dev, "Failed to map DMU regs\n");
> + return PTR_ERR(usb2->dmu);
> + }
> +
> + dev_warn(dev, "using deprecated DT binding\n");
> }
>
> usb2->ref_clk = devm_clk_get(dev, "phy-ref-clk");
>
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2021-03-08 6:09 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
[not found] <20210226114501.31086-1-zajec5@gmail.com>
2021-03-05 17:24 ` [PATCH 1/3] dt-bindings: phy: convert Broadcom NS USB 2.0 to the json-schema Rafał Miłecki
[not found] ` <20210226114501.31086-3-zajec5@gmail.com>
2021-03-05 17:25 ` [PATCH 3/3] phy: bcm-ns-usb2: support updated single CRU reg DT binding Rafał Miłecki
2021-03-05 21:50 ` Rafał Miłecki
2021-03-05 21:48 ` [PATCH 1/3] dt-bindings: phy: convert Broadcom NS USB 2.0 to the json-schema Rafał Miłecki
[not found] ` <20210226114501.31086-2-zajec5@gmail.com>
2021-03-05 17:24 ` [PATCH 2/3] dt-bindings: phy: brcm,ns-usb2-phy: bind single CRU reg Rafał Miłecki
2021-03-05 21:50 ` Rafał Miłecki
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).