[PATCHv2 0/7] phy-rockchip-inno-usb2: add RK3588 support

[PATCHv2 0/7] phy-rockchip-inno-usb2: add RK3588 support

[Sebastian Reichel]

Hi,

This adds RK3588 to the Rockchip Inno USB2 PHY driver. I have tested this
with USB2_0 and USB2_1.

Changes since PATCHv1:
 * https://lore.kernel.org/all/20230331163812.6124-1-sebastian.reichel@collabora.com/
 * Added patch simplifying phyclk handling
 * Added patch simplifying matchdata handling
 * Added patches for reset handling and PHY tuning; after doing more
   testing I noticed my previous patchset does not support hotplug and
   USB devices need to be plugged in at boot time (more specifically
   in PATCHv1 it had to be plugged before the PHY is suspended). This
   fixes the issue.

-- Sebastian

Sebastian Reichel (7):
  dt-bindings: soc: rockchip: add rk3588 usb2phy syscon
  dt-bindings: phy: rockchip,inno-usb2phy: add rk3588
  phy: phy-rockchip-inno-usb2: add rk3588 support
  phy: phy-rockchip-inno-usb2: add reset support
  phy: phy-rockchip-inno-usb2: add rk3588 phy tuning support
  phy: phy-rockchip-inno-usb2: simplify phy clock handling
  phy: phy-rockchip-inno-usb2: simplify getting match data

 .../bindings/phy/rockchip,inno-usb2phy.yaml   |  21 +-
 .../devicetree/bindings/soc/rockchip/grf.yaml |   2 +
 drivers/phy/rockchip/phy-rockchip-inno-usb2.c | 352 ++++++++++++++++--
 3 files changed, 339 insertions(+), 36 deletions(-)

-- 
2.39.2


-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

[PATCHv2 1/7] dt-bindings: soc: rockchip: add rk3588 usb2phy syscon

[Sebastian Reichel]

The usb2phy is accessible via a syscon registers on RK3588, similar
to rk3399.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
 Documentation/devicetree/bindings/soc/rockchip/grf.yaml | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/soc/rockchip/grf.yaml b/Documentation/devicetree/bindings/soc/rockchip/grf.yaml
index e697c928900d..a873f74564f2 100644
--- a/Documentation/devicetree/bindings/soc/rockchip/grf.yaml
+++ b/Documentation/devicetree/bindings/soc/rockchip/grf.yaml
@@ -52,6 +52,7 @@ properties:
               - rockchip,rk3399-pmugrf
               - rockchip,rk3568-grf
               - rockchip,rk3568-pmugrf
+              - rockchip,rk3588-usb2phy-grf
               - rockchip,rv1108-grf
               - rockchip,rv1108-pmugrf
               - rockchip,rv1126-grf
@@ -195,6 +196,7 @@ allOf:
               - rockchip,rk3308-usb2phy-grf
               - rockchip,rk3328-usb2phy-grf
               - rockchip,rk3399-grf
+              - rockchip,rk3588-usb2phy-grf
               - rockchip,rv1108-grf
 
     then:
-- 
2.39.2


-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

[PATCHv2 2/7] dt-bindings: phy: rockchip,inno-usb2phy: add rk3588

[Sebastian Reichel]

Add compatible for the USB2 phy in the Rockchip RK3588 SoC.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
 .../bindings/phy/rockchip,inno-usb2phy.yaml   | 21 ++++++++++++++++---
 1 file changed, 18 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/phy/rockchip,inno-usb2phy.yaml b/Documentation/devicetree/bindings/phy/rockchip,inno-usb2phy.yaml
index 0d6b8c28be07..5254413137c6 100644
--- a/Documentation/devicetree/bindings/phy/rockchip,inno-usb2phy.yaml
+++ b/Documentation/devicetree/bindings/phy/rockchip,inno-usb2phy.yaml
@@ -20,6 +20,7 @@ properties:
       - rockchip,rk3366-usb2phy
       - rockchip,rk3399-usb2phy
       - rockchip,rk3568-usb2phy
+      - rockchip,rk3588-usb2phy
       - rockchip,rv1108-usb2phy
 
   reg:
@@ -56,6 +57,14 @@ properties:
     description: Muxed interrupt for both ports
     maxItems: 1
 
+  resets:
+    maxItems: 2
+
+  reset-names:
+    items:
+      - const: phy
+      - const: apb
+
   rockchip,usbgrf:
     $ref: /schemas/types.yaml#/definitions/phandle
     description:
@@ -120,15 +129,21 @@ required:
   - reg
   - clock-output-names
   - "#clock-cells"
-  - host-port
-  - otg-port
+
+anyOf:
+  - required:
+      - otg-port
+  - required:
+      - host-port
 
 allOf:
   - if:
       properties:
         compatible:
           contains:
-            const: rockchip,rk3568-usb2phy
+            enum:
+              - rockchip,rk3568-usb2phy
+              - rockchip,rk3588-usb2phy
 
     then:
       properties:
-- 
2.39.2


-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

[PATCHv2 3/7] phy: phy-rockchip-inno-usb2: add rk3588 support

[Sebastian Reichel]

Add basic support for the USB2 PHY found in the Rockchip RK3588.

Co-developed-by: William Wu <william.wu@rock-chips.com>
Signed-off-by: William Wu <william.wu@rock-chips.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
 drivers/phy/rockchip/phy-rockchip-inno-usb2.c | 224 ++++++++++++++++--
 1 file changed, 210 insertions(+), 14 deletions(-)

diff --git a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
index a0bc10aa7961..b75712bd20c9 100644
--- a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
+++ b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
@@ -116,6 +116,12 @@ struct rockchip_chg_det_reg {
  * @bvalid_det_en: vbus valid rise detection enable register.
  * @bvalid_det_st: vbus valid rise detection status register.
  * @bvalid_det_clr: vbus valid rise detection clear register.
+ * @disfall_en: host disconnect fall edge detection enable.
+ * @disfall_st: host disconnect fall edge detection state.
+ * @disfall_clr: host disconnect fall edge detection clear.
+ * @disrise_en: host disconnect rise edge detection enable.
+ * @disrise_st: host disconnect rise edge detection state.
+ * @disrise_clr: host disconnect rise edge detection clear.
  * @id_det_en: id detection enable register.
  * @id_det_st: id detection state register.
  * @id_det_clr: id detection clear register.
@@ -133,6 +139,12 @@ struct rockchip_usb2phy_port_cfg {
 	struct usb2phy_reg	bvalid_det_en;
 	struct usb2phy_reg	bvalid_det_st;
 	struct usb2phy_reg	bvalid_det_clr;
+	struct usb2phy_reg      disfall_en;
+	struct usb2phy_reg      disfall_st;
+	struct usb2phy_reg      disfall_clr;
+	struct usb2phy_reg      disrise_en;
+	struct usb2phy_reg      disrise_st;
+	struct usb2phy_reg      disrise_clr;
 	struct usb2phy_reg	id_det_en;
 	struct usb2phy_reg	id_det_st;
 	struct usb2phy_reg	id_det_clr;
@@ -168,6 +180,7 @@ struct rockchip_usb2phy_cfg {
  * @port_id: flag for otg port or host port.
  * @suspended: phy suspended flag.
  * @vbus_attached: otg device vbus status.
+ * @host_disconnect: usb host disconnect status.
  * @bvalid_irq: IRQ number assigned for vbus valid rise detection.
  * @id_irq: IRQ number assigned for ID pin detection.
  * @ls_irq: IRQ number assigned for linestate detection.
@@ -187,6 +200,7 @@ struct rockchip_usb2phy_port {
 	unsigned int	port_id;
 	bool		suspended;
 	bool		vbus_attached;
+	bool            host_disconnect;
 	int		bvalid_irq;
 	int		id_irq;
 	int		ls_irq;
@@ -405,6 +419,27 @@ static int rockchip_usb2phy_extcon_register(struct rockchip_usb2phy *rphy)
 	return 0;
 }
 
+static int rockchip_usb2phy_enable_host_disc_irq(struct rockchip_usb2phy *rphy,
+						 struct rockchip_usb2phy_port *rport,
+						 bool en)
+{
+	int ret;
+
+	ret = property_enable(rphy->grf, &rport->port_cfg->disfall_clr, true);
+	if (ret)
+		return ret;
+
+	ret = property_enable(rphy->grf, &rport->port_cfg->disfall_en, en);
+	if (ret)
+		return ret;
+
+	ret = property_enable(rphy->grf, &rport->port_cfg->disrise_clr, true);
+	if (ret)
+		return ret;
+
+	return property_enable(rphy->grf, &rport->port_cfg->disrise_en, en);
+}
+
 static int rockchip_usb2phy_init(struct phy *phy)
 {
 	struct rockchip_usb2phy_port *rport = phy_get_drvdata(phy);
@@ -449,6 +484,15 @@ static int rockchip_usb2phy_init(struct phy *phy)
 			dev_dbg(&rport->phy->dev, "mode %d\n", rport->mode);
 		}
 	} else if (rport->port_id == USB2PHY_PORT_HOST) {
+		if (rport->port_cfg->disfall_en.offset) {
+			rport->host_disconnect = true;
+			ret = rockchip_usb2phy_enable_host_disc_irq(rphy, rport, true);
+			if (ret) {
+				dev_err(rphy->dev, "failed to enable disconnect irq\n");
+				goto out;
+			}
+		}
+
 		/* clear linestate and enable linestate detect irq */
 		ret = property_enable(rphy->grf,
 				      &rport->port_cfg->ls_det_clr, true);
@@ -810,9 +854,7 @@ static void rockchip_usb2phy_sm_work(struct work_struct *work)
 	struct rockchip_usb2phy_port *rport =
 		container_of(work, struct rockchip_usb2phy_port, sm_work.work);
 	struct rockchip_usb2phy *rphy = dev_get_drvdata(rport->phy->dev.parent);
-	unsigned int sh = rport->port_cfg->utmi_hstdet.bitend -
-			  rport->port_cfg->utmi_hstdet.bitstart + 1;
-	unsigned int ul, uhd, state;
+	unsigned int sh, ul, uhd, state;
 	unsigned int ul_mask, uhd_mask;
 	int ret;
 
@@ -822,18 +864,26 @@ static void rockchip_usb2phy_sm_work(struct work_struct *work)
 	if (ret < 0)
 		goto next_schedule;
 
-	ret = regmap_read(rphy->grf, rport->port_cfg->utmi_hstdet.offset, &uhd);
-	if (ret < 0)
-		goto next_schedule;
-
-	uhd_mask = GENMASK(rport->port_cfg->utmi_hstdet.bitend,
-			   rport->port_cfg->utmi_hstdet.bitstart);
 	ul_mask = GENMASK(rport->port_cfg->utmi_ls.bitend,
 			  rport->port_cfg->utmi_ls.bitstart);
 
-	/* stitch on utmi_ls and utmi_hstdet as phy state */
-	state = ((uhd & uhd_mask) >> rport->port_cfg->utmi_hstdet.bitstart) |
-		(((ul & ul_mask) >> rport->port_cfg->utmi_ls.bitstart) << sh);
+	if (rport->port_cfg->utmi_hstdet.offset) {
+		ret = regmap_read(rphy->grf, rport->port_cfg->utmi_hstdet.offset, &uhd);
+		if (ret < 0)
+			goto next_schedule;
+
+		uhd_mask = GENMASK(rport->port_cfg->utmi_hstdet.bitend,
+				   rport->port_cfg->utmi_hstdet.bitstart);
+
+		sh = rport->port_cfg->utmi_hstdet.bitend -
+		     rport->port_cfg->utmi_hstdet.bitstart + 1;
+		/* stitch on utmi_ls and utmi_hstdet as phy state */
+		state = ((uhd & uhd_mask) >> rport->port_cfg->utmi_hstdet.bitstart) |
+			(((ul & ul_mask) >> rport->port_cfg->utmi_ls.bitstart) << sh);
+	} else {
+		state = ((ul & ul_mask) >> rport->port_cfg->utmi_ls.bitstart) << 1 |
+			rport->host_disconnect;
+	}
 
 	switch (state) {
 	case PHY_STATE_HS_ONLINE:
@@ -966,6 +1016,31 @@ static irqreturn_t rockchip_usb2phy_otg_mux_irq(int irq, void *data)
 	return ret;
 }
 
+static irqreturn_t rockchip_usb2phy_host_disc_irq(int irq, void *data)
+{
+	struct rockchip_usb2phy_port *rport = data;
+	struct rockchip_usb2phy *rphy = dev_get_drvdata(rport->phy->dev.parent);
+
+	if (!property_enabled(rphy->grf, &rport->port_cfg->disfall_st) &&
+	    !property_enabled(rphy->grf, &rport->port_cfg->disrise_st))
+		return IRQ_NONE;
+
+	mutex_lock(&rport->mutex);
+
+	/* clear disconnect fall or rise detect irq pending status */
+	if (property_enabled(rphy->grf, &rport->port_cfg->disfall_st)) {
+		property_enable(rphy->grf, &rport->port_cfg->disfall_clr, true);
+		rport->host_disconnect = false;
+	} else if (property_enabled(rphy->grf, &rport->port_cfg->disrise_st)) {
+		property_enable(rphy->grf, &rport->port_cfg->disrise_clr, true);
+		rport->host_disconnect = true;
+	}
+
+	mutex_unlock(&rport->mutex);
+
+	return IRQ_HANDLED;
+}
+
 static irqreturn_t rockchip_usb2phy_irq(int irq, void *data)
 {
 	struct rockchip_usb2phy *rphy = data;
@@ -978,6 +1053,10 @@ static irqreturn_t rockchip_usb2phy_irq(int irq, void *data)
 		if (!rport->phy)
 			continue;
 
+		if (rport->port_id == USB2PHY_PORT_HOST &&
+		    rport->port_cfg->disfall_en.offset)
+			ret |= rockchip_usb2phy_host_disc_irq(irq, rport);
+
 		switch (rport->port_id) {
 		case USB2PHY_PORT_OTG:
 			if (rport->mode != USB_DR_MODE_HOST &&
@@ -1254,14 +1333,14 @@ static int rockchip_usb2phy_probe(struct platform_device *pdev)
 
 	/* find out a proper config which can be matched with dt. */
 	index = 0;
-	while (phy_cfgs[index].reg) {
+	do {
 		if (phy_cfgs[index].reg == reg) {
 			rphy->phy_cfg = &phy_cfgs[index];
 			break;
 		}
 
 		++index;
-	}
+	} while (phy_cfgs[index].reg);
 
 	if (!rphy->phy_cfg) {
 		dev_err(dev, "no phy-config can be matched with %pOFn node\n",
@@ -1664,6 +1743,122 @@ static const struct rockchip_usb2phy_cfg rk3568_phy_cfgs[] = {
 	{ /* sentinel */ }
 };
 
+static const struct rockchip_usb2phy_cfg rk3588_phy_cfgs[] = {
+	{
+		.reg = 0x0000,
+		.num_ports	= 1,
+		.clkout_ctl	= { 0x0000, 0, 0, 1, 0 },
+		.port_cfgs	= {
+			[USB2PHY_PORT_OTG] = {
+				.phy_sus	= { 0x000c, 11, 11, 0, 1 },
+				.bvalid_det_en	= { 0x0080, 1, 1, 0, 1 },
+				.bvalid_det_st	= { 0x0084, 1, 1, 0, 1 },
+				.bvalid_det_clr = { 0x0088, 1, 1, 0, 1 },
+				.ls_det_en	= { 0x0080, 0, 0, 0, 1 },
+				.ls_det_st	= { 0x0084, 0, 0, 0, 1 },
+				.ls_det_clr	= { 0x0088, 0, 0, 0, 1 },
+				.disfall_en	= { 0x0080, 6, 6, 0, 1 },
+				.disfall_st	= { 0x0084, 6, 6, 0, 1 },
+				.disfall_clr	= { 0x0088, 6, 6, 0, 1 },
+				.disrise_en	= { 0x0080, 5, 5, 0, 1 },
+				.disrise_st	= { 0x0084, 5, 5, 0, 1 },
+				.disrise_clr	= { 0x0088, 5, 5, 0, 1 },
+				.utmi_avalid	= { 0x00c0, 7, 7, 0, 1 },
+				.utmi_bvalid	= { 0x00c0, 6, 6, 0, 1 },
+				.utmi_ls	= { 0x00c0, 10, 9, 0, 1 },
+			}
+		},
+		.chg_det = {
+			.cp_det		= { 0x00c0, 0, 0, 0, 1 },
+			.dcp_det	= { 0x00c0, 0, 0, 0, 1 },
+			.dp_det		= { 0x00c0, 1, 1, 1, 0 },
+			.idm_sink_en	= { 0x0008, 5, 5, 1, 0 },
+			.idp_sink_en	= { 0x0008, 5, 5, 0, 1 },
+			.idp_src_en	= { 0x0008, 14, 14, 0, 1 },
+			.rdm_pdwn_en	= { 0x0008, 14, 14, 0, 1 },
+			.vdm_src_en	= { 0x0008, 7, 6, 0, 3 },
+			.vdp_src_en	= { 0x0008, 7, 6, 0, 3 },
+		},
+	},
+	{
+		.reg = 0x4000,
+		.num_ports	= 1,
+		.clkout_ctl	= { 0x0000, 0, 0, 1, 0 },
+		.port_cfgs	= {
+			[USB2PHY_PORT_OTG] = {
+				.phy_sus	= { 0x000c, 11, 11, 0, 1 },
+				.bvalid_det_en	= { 0x0080, 1, 1, 0, 1 },
+				.bvalid_det_st	= { 0x0084, 1, 1, 0, 1 },
+				.bvalid_det_clr = { 0x0088, 1, 1, 0, 1 },
+				.ls_det_en	= { 0x0080, 0, 0, 0, 1 },
+				.ls_det_st	= { 0x0084, 0, 0, 0, 1 },
+				.ls_det_clr	= { 0x0088, 0, 0, 0, 1 },
+				.disfall_en	= { 0x0080, 6, 6, 0, 1 },
+				.disfall_st	= { 0x0084, 6, 6, 0, 1 },
+				.disfall_clr	= { 0x0088, 6, 6, 0, 1 },
+				.disrise_en	= { 0x0080, 5, 5, 0, 1 },
+				.disrise_st	= { 0x0084, 5, 5, 0, 1 },
+				.disrise_clr	= { 0x0088, 5, 5, 0, 1 },
+				.utmi_avalid	= { 0x00c0, 7, 7, 0, 1 },
+				.utmi_bvalid	= { 0x00c0, 6, 6, 0, 1 },
+				.utmi_ls	= { 0x00c0, 10, 9, 0, 1 },
+			}
+		},
+		.chg_det = {
+			.cp_det		= { 0x00c0, 0, 0, 0, 1 },
+			.dcp_det	= { 0x00c0, 0, 0, 0, 1 },
+			.dp_det		= { 0x00c0, 1, 1, 1, 0 },
+			.idm_sink_en	= { 0x0008, 5, 5, 1, 0 },
+			.idp_sink_en	= { 0x0008, 5, 5, 0, 1 },
+			.idp_src_en	= { 0x0008, 14, 14, 0, 1 },
+			.rdm_pdwn_en	= { 0x0008, 14, 14, 0, 1 },
+			.vdm_src_en	= { 0x0008, 7, 6, 0, 3 },
+			.vdp_src_en	= { 0x0008, 7, 6, 0, 3 },
+		},
+	},
+	{
+		.reg = 0x8000,
+		.num_ports	= 1,
+		.clkout_ctl	= { 0x0000, 0, 0, 1, 0 },
+		.port_cfgs	= {
+			[USB2PHY_PORT_HOST] = {
+				.phy_sus	= { 0x0008, 2, 2, 0, 1 },
+				.ls_det_en	= { 0x0080, 0, 0, 0, 1 },
+				.ls_det_st	= { 0x0084, 0, 0, 0, 1 },
+				.ls_det_clr	= { 0x0088, 0, 0, 0, 1 },
+				.disfall_en	= { 0x0080, 6, 6, 0, 1 },
+				.disfall_st	= { 0x0084, 6, 6, 0, 1 },
+				.disfall_clr	= { 0x0088, 6, 6, 0, 1 },
+				.disrise_en	= { 0x0080, 5, 5, 0, 1 },
+				.disrise_st	= { 0x0084, 5, 5, 0, 1 },
+				.disrise_clr	= { 0x0088, 5, 5, 0, 1 },
+				.utmi_ls	= { 0x00c0, 10, 9, 0, 1 },
+			}
+		},
+	},
+	{
+		.reg = 0xc000,
+		.num_ports	= 1,
+		.clkout_ctl	= { 0x0000, 0, 0, 1, 0 },
+		.port_cfgs	= {
+			[USB2PHY_PORT_HOST] = {
+				.phy_sus	= { 0x0008, 2, 2, 0, 1 },
+				.ls_det_en	= { 0x0080, 0, 0, 0, 1 },
+				.ls_det_st	= { 0x0084, 0, 0, 0, 1 },
+				.ls_det_clr	= { 0x0088, 0, 0, 0, 1 },
+				.disfall_en	= { 0x0080, 6, 6, 0, 1 },
+				.disfall_st	= { 0x0084, 6, 6, 0, 1 },
+				.disfall_clr	= { 0x0088, 6, 6, 0, 1 },
+				.disrise_en	= { 0x0080, 5, 5, 0, 1 },
+				.disrise_st	= { 0x0084, 5, 5, 0, 1 },
+				.disrise_clr	= { 0x0088, 5, 5, 0, 1 },
+				.utmi_ls	= { 0x00c0, 10, 9, 0, 1 },
+			}
+		},
+	},
+	{ /* sentinel */ }
+};
+
 static const struct rockchip_usb2phy_cfg rv1108_phy_cfgs[] = {
 	{
 		.reg = 0x100,
@@ -1714,6 +1909,7 @@ static const struct of_device_id rockchip_usb2phy_dt_match[] = {
 	{ .compatible = "rockchip,rk3366-usb2phy", .data = &rk3366_phy_cfgs },
 	{ .compatible = "rockchip,rk3399-usb2phy", .data = &rk3399_phy_cfgs },
 	{ .compatible = "rockchip,rk3568-usb2phy", .data = &rk3568_phy_cfgs },
+	{ .compatible = "rockchip,rk3588-usb2phy", .data = &rk3588_phy_cfgs },
 	{ .compatible = "rockchip,rv1108-usb2phy", .data = &rv1108_phy_cfgs },
 	{}
 };
-- 
2.39.2


-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

[PATCHv2 4/7] phy: phy-rockchip-inno-usb2: add reset support

[Sebastian Reichel]

Add reset handling support, which is needed for proper
operation with RK3588.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
 drivers/phy/rockchip/phy-rockchip-inno-usb2.c | 38 +++++++++++++++++++
 1 file changed, 38 insertions(+)

diff --git a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
index b75712bd20c9..3a78c5bf11d4 100644
--- a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
+++ b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
@@ -24,6 +24,7 @@
 #include <linux/platform_device.h>
 #include <linux/power_supply.h>
 #include <linux/regmap.h>
+#include <linux/reset.h>
 #include <linux/mfd/syscon.h>
 #include <linux/usb/of.h>
 #include <linux/usb/otg.h>
@@ -223,6 +224,7 @@ struct rockchip_usb2phy_port {
  * @clk: clock struct of phy input clk.
  * @clk480m: clock struct of phy output clk.
  * @clk480m_hw: clock struct of phy output clk management.
+ * @phy_reset: phy reset control.
  * @chg_state: states involved in USB charger detection.
  * @chg_type: USB charger types.
  * @dcd_retries: The retry count used to track Data contact
@@ -239,6 +241,7 @@ struct rockchip_usb2phy {
 	struct clk	*clk;
 	struct clk	*clk480m;
 	struct clk_hw	clk480m_hw;
+	struct reset_control	*phy_reset;
 	enum usb_chg_state	chg_state;
 	enum power_supply_type	chg_type;
 	u8			dcd_retries;
@@ -280,6 +283,25 @@ static inline bool property_enabled(struct regmap *base,
 	return tmp != reg->disable;
 }
 
+static int rockchip_usb2phy_reset(struct rockchip_usb2phy *rphy)
+{
+	int ret;
+
+	ret = reset_control_assert(rphy->phy_reset);
+	if (ret)
+		return ret;
+
+	udelay(10);
+
+	ret = reset_control_deassert(rphy->phy_reset);
+	if (ret)
+		return ret;
+
+	usleep_range(100, 200);
+
+	return 0;
+}
+
 static int rockchip_usb2phy_clk480m_prepare(struct clk_hw *hw)
 {
 	struct rockchip_usb2phy *rphy =
@@ -534,6 +556,18 @@ static int rockchip_usb2phy_power_on(struct phy *phy)
 		return ret;
 	}
 
+	/*
+	 * For rk3588, it needs to reset phy when exit from
+	 * suspend mode with common_on_n 1'b1(aka REFCLK_LOGIC,
+	 * Bias, and PLL blocks are powered down) for lower
+	 * power consumption. If you don't want to reset phy,
+	 * please keep the common_on_n 1'b0 to set these blocks
+	 * remain powered.
+	 */
+	ret = rockchip_usb2phy_reset(rphy);
+	if (ret)
+		return ret;
+
 	/* waiting for the utmi_clk to become stable */
 	usleep_range(1500, 2000);
 
@@ -1348,6 +1382,10 @@ static int rockchip_usb2phy_probe(struct platform_device *pdev)
 		return -EINVAL;
 	}
 
+	rphy->phy_reset = devm_reset_control_get_optional(dev, "phy");
+	if (IS_ERR(rphy->phy_reset))
+		return PTR_ERR(rphy->phy_reset);
+
 	rphy->clk = of_clk_get_by_name(np, "phyclk");
 	if (!IS_ERR(rphy->clk)) {
 		clk_prepare_enable(rphy->clk);
-- 
2.39.2


-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

[PATCHv2 5/7] phy: phy-rockchip-inno-usb2: add rk3588 phy tuning support

[Sebastian Reichel]

On RK3588 some registers need to be tweaked to support waking up from
suspend when a USB device is plugged into a port from a suspended PHY.
Without this change USB devices only work when they are plugged at
boot time.

Apart from that it optimizes settings to avoid devices toggling
between fullspeed and highspeed mode.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
 drivers/phy/rockchip/phy-rockchip-inno-usb2.c | 63 +++++++++++++++++++
 1 file changed, 63 insertions(+)

diff --git a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
index 3a78c5bf11d4..9f6d09da7fbd 100644
--- a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
+++ b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
@@ -33,6 +33,8 @@
 #define SCHEDULE_DELAY		(60 * HZ)
 #define OTG_SCHEDULE_DELAY	(2 * HZ)
 
+struct rockchip_usb2phy;
+
 enum rockchip_usb2phy_port_id {
 	USB2PHY_PORT_OTG,
 	USB2PHY_PORT_HOST,
@@ -163,6 +165,7 @@ struct rockchip_usb2phy_port_cfg {
  * struct rockchip_usb2phy_cfg - usb-phy configuration.
  * @reg: the address offset of grf for usb-phy config.
  * @num_ports: specify how many ports that the phy has.
+ * @phy_tuning: phy default parameters tuning.
  * @clkout_ctl: keep on/turn off output clk of phy.
  * @port_cfgs: usb-phy port configurations.
  * @chg_det: charger detection registers.
@@ -170,6 +173,7 @@ struct rockchip_usb2phy_port_cfg {
 struct rockchip_usb2phy_cfg {
 	unsigned int	reg;
 	unsigned int	num_ports;
+	int (*phy_tuning)(struct rockchip_usb2phy *rphy);
 	struct usb2phy_reg	clkout_ctl;
 	const struct rockchip_usb2phy_port_cfg	port_cfgs[USB2PHY_NUM_PORTS];
 	const struct rockchip_chg_det_reg	chg_det;
@@ -1400,6 +1404,12 @@ static int rockchip_usb2phy_probe(struct platform_device *pdev)
 		goto disable_clks;
 	}
 
+	if (rphy->phy_cfg->phy_tuning) {
+		ret = rphy->phy_cfg->phy_tuning(rphy);
+		if (ret)
+			goto disable_clks;
+	}
+
 	index = 0;
 	for_each_available_child_of_node(np, child_np) {
 		struct rockchip_usb2phy_port *rport = &rphy->ports[index];
@@ -1468,6 +1478,55 @@ static int rockchip_usb2phy_probe(struct platform_device *pdev)
 	return ret;
 }
 
+static int rk3588_usb2phy_tuning(struct rockchip_usb2phy *rphy)
+{
+	int ret = 0;
+	bool usb3otg = false;
+	/*
+	 * utmi_termselect = 1'b1 (en FS terminations)
+	 * utmi_xcvrselect = 2'b01 (FS transceiver)
+	 */
+	int suspend_cfg = 0x14;
+
+	if (rphy->phy_cfg->reg == 0x0000 || rphy->phy_cfg->reg == 0x4000) {
+		/* USB2 config for USB3_0 and USB3_1 */
+		suspend_cfg |= 0x01; /* utmi_opmode = 2'b01 (no-driving) */
+		usb3otg = true;
+	} else if (rphy->phy_cfg->reg == 0x8000 || rphy->phy_cfg->reg == 0xc000) {
+		/* USB2 config for USB2_0 and USB2_1 */
+		suspend_cfg |= 0x00; /* utmi_opmode = 2'b00 (normal) */
+	} else {
+		return -EINVAL;
+	}
+
+	/* Deassert SIDDQ to power on analog block */
+	ret = regmap_write(rphy->grf, 0x0008, GENMASK(29, 29) | 0x0000);
+	if (ret)
+		return ret;
+
+	/* Do reset after exit IDDQ mode */
+	ret = rockchip_usb2phy_reset(rphy);
+	if (ret)
+		return ret;
+
+	/* suspend configuration */
+	ret |= regmap_write(rphy->grf, 0x000c, GENMASK(20, 16) | suspend_cfg);
+
+	/* HS DC Voltage Level Adjustment 4'b1001 : +5.89% */
+	ret |= regmap_write(rphy->grf, 0x0004, GENMASK(27, 24) | 0x0900);
+
+	/* HS Transmitter Pre-Emphasis Current Control 2'b10 : 2x */
+	ret |= regmap_write(rphy->grf, 0x0008, GENMASK(20, 19) | 0x0010);
+
+	if (!usb3otg)
+		return ret;
+
+	/* Pullup iddig pin for USB3_0 OTG mode */
+	ret |= regmap_write(rphy->grf, 0x0010, GENMASK(17, 16) | 0x0003);
+
+	return ret;
+}
+
 static const struct rockchip_usb2phy_cfg rk3228_phy_cfgs[] = {
 	{
 		.reg = 0x760,
@@ -1785,6 +1844,7 @@ static const struct rockchip_usb2phy_cfg rk3588_phy_cfgs[] = {
 	{
 		.reg = 0x0000,
 		.num_ports	= 1,
+		.phy_tuning	= rk3588_usb2phy_tuning,
 		.clkout_ctl	= { 0x0000, 0, 0, 1, 0 },
 		.port_cfgs	= {
 			[USB2PHY_PORT_OTG] = {
@@ -1821,6 +1881,7 @@ static const struct rockchip_usb2phy_cfg rk3588_phy_cfgs[] = {
 	{
 		.reg = 0x4000,
 		.num_ports	= 1,
+		.phy_tuning	= rk3588_usb2phy_tuning,
 		.clkout_ctl	= { 0x0000, 0, 0, 1, 0 },
 		.port_cfgs	= {
 			[USB2PHY_PORT_OTG] = {
@@ -1857,6 +1918,7 @@ static const struct rockchip_usb2phy_cfg rk3588_phy_cfgs[] = {
 	{
 		.reg = 0x8000,
 		.num_ports	= 1,
+		.phy_tuning	= rk3588_usb2phy_tuning,
 		.clkout_ctl	= { 0x0000, 0, 0, 1, 0 },
 		.port_cfgs	= {
 			[USB2PHY_PORT_HOST] = {
@@ -1877,6 +1939,7 @@ static const struct rockchip_usb2phy_cfg rk3588_phy_cfgs[] = {
 	{
 		.reg = 0xc000,
 		.num_ports	= 1,
+		.phy_tuning	= rk3588_usb2phy_tuning,
 		.clkout_ctl	= { 0x0000, 0, 0, 1, 0 },
 		.port_cfgs	= {
 			[USB2PHY_PORT_HOST] = {
-- 
2.39.2


-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

[PATCHv2 6/7] phy: phy-rockchip-inno-usb2: simplify phy clock handling

[Sebastian Reichel]

Simplify phyclk handling by using devm_clk_get_optional_enabled to
acquire and enable the optional clock. This also fixes a resource
leak in driver remove path and adds proper error handling.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
 drivers/phy/rockchip/phy-rockchip-inno-usb2.c | 19 ++++++-------------
 1 file changed, 6 insertions(+), 13 deletions(-)

diff --git a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
index 9f6d09da7fbd..2de1408eaa60 100644
--- a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
+++ b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
@@ -1390,24 +1390,22 @@ static int rockchip_usb2phy_probe(struct platform_device *pdev)
 	if (IS_ERR(rphy->phy_reset))
 		return PTR_ERR(rphy->phy_reset);
 
-	rphy->clk = of_clk_get_by_name(np, "phyclk");
-	if (!IS_ERR(rphy->clk)) {
-		clk_prepare_enable(rphy->clk);
-	} else {
-		dev_info(&pdev->dev, "no phyclk specified\n");
-		rphy->clk = NULL;
+	rphy->clk = devm_clk_get_optional_enabled(dev, "phyclk");
+	if (IS_ERR(rphy->clk)) {
+		return dev_err_probe(&pdev->dev, PTR_ERR(rphy->clk),
+				     "failed to get phyclk\n");
 	}
 
 	ret = rockchip_usb2phy_clk480m_register(rphy);
 	if (ret) {
 		dev_err(dev, "failed to register 480m output clock\n");
-		goto disable_clks;
+		return ret;
 	}
 
 	if (rphy->phy_cfg->phy_tuning) {
 		ret = rphy->phy_cfg->phy_tuning(rphy);
 		if (ret)
-			goto disable_clks;
+			return ret;
 	}
 
 	index = 0;
@@ -1470,11 +1468,6 @@ static int rockchip_usb2phy_probe(struct platform_device *pdev)
 
 put_child:
 	of_node_put(child_np);
-disable_clks:
-	if (rphy->clk) {
-		clk_disable_unprepare(rphy->clk);
-		clk_put(rphy->clk);
-	}
 	return ret;
 }
 
-- 
2.39.2


-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

[PATCHv2 7/7] phy: phy-rockchip-inno-usb2: simplify getting match data

[Sebastian Reichel]

Simplify the code by directly getting the match data via
device_get_match_data() instead of open coding its functionality.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
 drivers/phy/rockchip/phy-rockchip-inno-usb2.c | 12 ++++--------
 1 file changed, 4 insertions(+), 8 deletions(-)

diff --git a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
index 2de1408eaa60..e978c73ba1e5 100644
--- a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
+++ b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
@@ -1305,7 +1305,6 @@ static int rockchip_usb2phy_probe(struct platform_device *pdev)
 	struct phy_provider *provider;
 	struct rockchip_usb2phy *rphy;
 	const struct rockchip_usb2phy_cfg *phy_cfgs;
-	const struct of_device_id *match;
 	unsigned int reg;
 	int index, ret;
 
@@ -1313,12 +1312,6 @@ static int rockchip_usb2phy_probe(struct platform_device *pdev)
 	if (!rphy)
 		return -ENOMEM;
 
-	match = of_match_device(dev->driver->of_match_table, dev);
-	if (!match || !match->data) {
-		dev_err(dev, "phy configs are not assigned!\n");
-		return -EINVAL;
-	}
-
 	if (!dev->parent || !dev->parent->of_node) {
 		rphy->grf = syscon_regmap_lookup_by_phandle(np, "rockchip,usbgrf");
 		if (IS_ERR(rphy->grf)) {
@@ -1359,12 +1352,15 @@ static int rockchip_usb2phy_probe(struct platform_device *pdev)
 	}
 
 	rphy->dev = dev;
-	phy_cfgs = match->data;
+	phy_cfgs = device_get_match_data(dev);
 	rphy->chg_state = USB_CHG_STATE_UNDEFINED;
 	rphy->chg_type = POWER_SUPPLY_TYPE_UNKNOWN;
 	rphy->irq = platform_get_irq_optional(pdev, 0);
 	platform_set_drvdata(pdev, rphy);
 
+	if (!phy_cfgs)
+		return dev_err_probe(dev, -EINVAL, "phy configs are not assigned!\n");
+
 	ret = rockchip_usb2phy_extcon_register(rphy);
 	if (ret)
 		return ret;
-- 
2.39.2


-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

Re: [PATCHv2 1/7] dt-bindings: soc: rockchip: add rk3588 usb2phy syscon

[Rob Herring]

On Mon, 03 Apr 2023 22:23:01 +0200, Sebastian Reichel wrote:
> The usb2phy is accessible via a syscon registers on RK3588, similar
> to rk3399.
> 
> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
> ---
>  Documentation/devicetree/bindings/soc/rockchip/grf.yaml | 2 ++
>  1 file changed, 2 insertions(+)
> 

Acked-by: Rob Herring <robh@kernel.org>


-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

Re: [PATCHv2 2/7] dt-bindings: phy: rockchip,inno-usb2phy: add rk3588

[Rob Herring]

On Mon, 03 Apr 2023 22:23:02 +0200, Sebastian Reichel wrote:
> Add compatible for the USB2 phy in the Rockchip RK3588 SoC.
> 
> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
> ---
>  .../bindings/phy/rockchip,inno-usb2phy.yaml   | 21 ++++++++++++++++---
>  1 file changed, 18 insertions(+), 3 deletions(-)
> 

Reviewed-by: Rob Herring <robh@kernel.org>


-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

Re: [PATCHv2 5/7] phy: phy-rockchip-inno-usb2: add rk3588 phy tuning support

[Vinod Koul]

On 03-04-23, 22:23, Sebastian Reichel wrote:
> On RK3588 some registers need to be tweaked to support waking up from
> suspend when a USB device is plugged into a port from a suspended PHY.
> Without this change USB devices only work when they are plugged at
> boot time.
> 
> Apart from that it optimizes settings to avoid devices toggling
> between fullspeed and highspeed mode.
> 
> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
> ---
>  drivers/phy/rockchip/phy-rockchip-inno-usb2.c | 63 +++++++++++++++++++
>  1 file changed, 63 insertions(+)
> 
> diff --git a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
> index 3a78c5bf11d4..9f6d09da7fbd 100644
> --- a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
> +++ b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
> @@ -33,6 +33,8 @@
>  #define SCHEDULE_DELAY		(60 * HZ)
>  #define OTG_SCHEDULE_DELAY	(2 * HZ)
>  
> +struct rockchip_usb2phy;
> +
>  enum rockchip_usb2phy_port_id {
>  	USB2PHY_PORT_OTG,
>  	USB2PHY_PORT_HOST,
> @@ -163,6 +165,7 @@ struct rockchip_usb2phy_port_cfg {
>   * struct rockchip_usb2phy_cfg - usb-phy configuration.
>   * @reg: the address offset of grf for usb-phy config.
>   * @num_ports: specify how many ports that the phy has.
> + * @phy_tuning: phy default parameters tuning.
>   * @clkout_ctl: keep on/turn off output clk of phy.
>   * @port_cfgs: usb-phy port configurations.
>   * @chg_det: charger detection registers.
> @@ -170,6 +173,7 @@ struct rockchip_usb2phy_port_cfg {
>  struct rockchip_usb2phy_cfg {
>  	unsigned int	reg;
>  	unsigned int	num_ports;
> +	int (*phy_tuning)(struct rockchip_usb2phy *rphy);
>  	struct usb2phy_reg	clkout_ctl;
>  	const struct rockchip_usb2phy_port_cfg	port_cfgs[USB2PHY_NUM_PORTS];
>  	const struct rockchip_chg_det_reg	chg_det;
> @@ -1400,6 +1404,12 @@ static int rockchip_usb2phy_probe(struct platform_device *pdev)
>  		goto disable_clks;
>  	}
>  
> +	if (rphy->phy_cfg->phy_tuning) {
> +		ret = rphy->phy_cfg->phy_tuning(rphy);
> +		if (ret)
> +			goto disable_clks;
> +	}
> +
>  	index = 0;
>  	for_each_available_child_of_node(np, child_np) {
>  		struct rockchip_usb2phy_port *rport = &rphy->ports[index];
> @@ -1468,6 +1478,55 @@ static int rockchip_usb2phy_probe(struct platform_device *pdev)
>  	return ret;
>  }
>  
> +static int rk3588_usb2phy_tuning(struct rockchip_usb2phy *rphy)
> +{
> +	int ret = 0;

superfluous init

> +	bool usb3otg = false;
> +	/*
> +	 * utmi_termselect = 1'b1 (en FS terminations)
> +	 * utmi_xcvrselect = 2'b01 (FS transceiver)
> +	 */
> +	int suspend_cfg = 0x14;
> +
> +	if (rphy->phy_cfg->reg == 0x0000 || rphy->phy_cfg->reg == 0x4000) {
> +		/* USB2 config for USB3_0 and USB3_1 */
> +		suspend_cfg |= 0x01; /* utmi_opmode = 2'b01 (no-driving) */
> +		usb3otg = true;
> +	} else if (rphy->phy_cfg->reg == 0x8000 || rphy->phy_cfg->reg == 0xc000) {
> +		/* USB2 config for USB2_0 and USB2_1 */
> +		suspend_cfg |= 0x00; /* utmi_opmode = 2'b00 (normal) */
> +	} else {
> +		return -EINVAL;
> +	}
> +
> +	/* Deassert SIDDQ to power on analog block */
> +	ret = regmap_write(rphy->grf, 0x0008, GENMASK(29, 29) | 0x0000);
> +	if (ret)
> +		return ret;
> +
> +	/* Do reset after exit IDDQ mode */
> +	ret = rockchip_usb2phy_reset(rphy);
> +	if (ret)
> +		return ret;
> +
> +	/* suspend configuration */
> +	ret |= regmap_write(rphy->grf, 0x000c, GENMASK(20, 16) | suspend_cfg);
> +
> +	/* HS DC Voltage Level Adjustment 4'b1001 : +5.89% */
> +	ret |= regmap_write(rphy->grf, 0x0004, GENMASK(27, 24) | 0x0900);
> +
> +	/* HS Transmitter Pre-Emphasis Current Control 2'b10 : 2x */
> +	ret |= regmap_write(rphy->grf, 0x0008, GENMASK(20, 19) | 0x0010);
> +
> +	if (!usb3otg)
> +		return ret;
> +
> +	/* Pullup iddig pin for USB3_0 OTG mode */
> +	ret |= regmap_write(rphy->grf, 0x0010, GENMASK(17, 16) | 0x0003);
> +
> +	return ret;
> +}
> +
>  static const struct rockchip_usb2phy_cfg rk3228_phy_cfgs[] = {
>  	{
>  		.reg = 0x760,
> @@ -1785,6 +1844,7 @@ static const struct rockchip_usb2phy_cfg rk3588_phy_cfgs[] = {
>  	{
>  		.reg = 0x0000,
>  		.num_ports	= 1,
> +		.phy_tuning	= rk3588_usb2phy_tuning,
>  		.clkout_ctl	= { 0x0000, 0, 0, 1, 0 },
>  		.port_cfgs	= {
>  			[USB2PHY_PORT_OTG] = {
> @@ -1821,6 +1881,7 @@ static const struct rockchip_usb2phy_cfg rk3588_phy_cfgs[] = {
>  	{
>  		.reg = 0x4000,
>  		.num_ports	= 1,
> +		.phy_tuning	= rk3588_usb2phy_tuning,
>  		.clkout_ctl	= { 0x0000, 0, 0, 1, 0 },
>  		.port_cfgs	= {
>  			[USB2PHY_PORT_OTG] = {
> @@ -1857,6 +1918,7 @@ static const struct rockchip_usb2phy_cfg rk3588_phy_cfgs[] = {
>  	{
>  		.reg = 0x8000,
>  		.num_ports	= 1,
> +		.phy_tuning	= rk3588_usb2phy_tuning,
>  		.clkout_ctl	= { 0x0000, 0, 0, 1, 0 },
>  		.port_cfgs	= {
>  			[USB2PHY_PORT_HOST] = {
> @@ -1877,6 +1939,7 @@ static const struct rockchip_usb2phy_cfg rk3588_phy_cfgs[] = {
>  	{
>  		.reg = 0xc000,
>  		.num_ports	= 1,
> +		.phy_tuning	= rk3588_usb2phy_tuning,
>  		.clkout_ctl	= { 0x0000, 0, 0, 1, 0 },
>  		.port_cfgs	= {
>  			[USB2PHY_PORT_HOST] = {
> -- 
> 2.39.2

-- 
~Vinod

-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

Re: (subset) [PATCHv2 0/7] phy-rockchip-inno-usb2: add RK3588 support

[Heiko Stuebner]

On Mon, 3 Apr 2023 22:23:00 +0200, Sebastian Reichel wrote:
> This adds RK3588 to the Rockchip Inno USB2 PHY driver. I have tested this
> with USB2_0 and USB2_1.
> 
> Changes since PATCHv1:
>  * https://lore.kernel.org/all/20230331163812.6124-1-sebastian.reichel@collabora.com/
>  * Added patch simplifying phyclk handling
>  * Added patch simplifying matchdata handling
>  * Added patches for reset handling and PHY tuning; after doing more
>    testing I noticed my previous patchset does not support hotplug and
>    USB devices need to be plugged in at boot time (more specifically
>    in PATCHv1 it had to be plugged before the PHY is suspended). This
>    fixes the issue.
> 
> [...]

Applied, thanks!

[1/7] dt-bindings: soc: rockchip: add rk3588 usb2phy syscon
      commit: 980cb53be481a6900fc08e6bbb77a6fe2986b211

Best regards,
-- 
Heiko Stuebner <heiko@sntech.de>

-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy