* [PATCH v5 0/2] Enable USB SS qmp phy for Qualcomm SM6115 SoC
@ 2023-04-05 19:16 Bhupesh Sharma
2023-04-05 19:16 ` [PATCH v5 1/2] dt-bindings: phy: qcom,qmp-usb: Fix phy subnode for SM6115 & QCM2290 USB3 PHY Bhupesh Sharma
2023-04-05 19:16 ` [PATCH v5 2/2] arm64: dts: qcom: sm6115: Add USB SS qmp phy node Bhupesh Sharma
0 siblings, 2 replies; 6+ messages in thread
From: Bhupesh Sharma @ 2023-04-05 19:16 UTC (permalink / raw)
To: linux-arm-msm, devicetree, linux-phy
Cc: agross, linux-kernel, andersson, bhupesh.sharma, bhupesh.linux,
krzysztof.kozlowski, robh+dt, konrad.dybcio, kishon, vkoul,
krzysztof.kozlowski+dt
Changes since v4:
-----------------
- v4 can be seen here: https://lore.kernel.org/linux-arm-msm/20230401154725.1059563-1-bhupesh.sharma@linaro.org/
- Collected Krzysztof's Ack for [PATCH 1/2].
- Added more descriptive commit logs as per Dmitry's comments on v4.
Changes since v3:
-----------------
- v3 can be seen here: https://lore.kernel.org/linux-arm-msm/20221215094532.589291-4-bhupesh.sharma@linaro.org/
- Fixed v4 as per the downstream driver code: https://android.googlesource.com/kernel/msm-extra/devicetree/+/refs/heads/android-msm-bramble-4.19-android11-qpr1/qcom/bengal-usb.dtsi#296
This patchset adds the support for USB SS qmp phy for Qualcomm SM6115
SoC. For the previous versions of this patch there were conversations
on irc as to whether this was a 'qcom,usb-ssphy-qmp-usb3-or-dp' or a
'qcom,usb-ssphy-qmp-dp-combo' as per downstream code and hardware
documentation.
But after a careful look at downstream dtsi (see [1]) it appears that
this indeed is a 'qcom,usb-ssphy-qmp-usb3-or-dp' phy and not a
'dp-combo' phy.
[1]. https://android.googlesource.com/kernel/msm-extra/devicetree/+/refs/heads/android-msm-bramble-4.19-android11-qpr1/qcom/bengal-usb.dtsi#296
Bhupesh Sharma (2):
dt-bindings: phy: qcom,qmp-usb: Fix phy subnode for SM6115 & QCM2290
USB3 PHY
arm64: dts: qcom: sm6115: Add USB SS qmp phy node
.../phy/qcom,msm8996-qmp-usb3-phy.yaml | 4 +--
.../boot/dts/qcom/sm4250-oneplus-billie2.dts | 3 ++
arch/arm64/boot/dts/qcom/sm6115.dtsi | 36 +++++++++++++++++--
.../boot/dts/qcom/sm6115p-lenovo-j606f.dts | 3 ++
4 files changed, 42 insertions(+), 4 deletions(-)
--
2.38.1
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
^ permalink raw reply [flat|nested] 6+ messages in thread* [PATCH v5 1/2] dt-bindings: phy: qcom,qmp-usb: Fix phy subnode for SM6115 & QCM2290 USB3 PHY 2023-04-05 19:16 [PATCH v5 0/2] Enable USB SS qmp phy for Qualcomm SM6115 SoC Bhupesh Sharma @ 2023-04-05 19:16 ` Bhupesh Sharma 2023-04-05 19:38 ` Dmitry Baryshkov 2023-04-05 19:16 ` [PATCH v5 2/2] arm64: dts: qcom: sm6115: Add USB SS qmp phy node Bhupesh Sharma 1 sibling, 1 reply; 6+ messages in thread From: Bhupesh Sharma @ 2023-04-05 19:16 UTC (permalink / raw) To: linux-arm-msm, devicetree, linux-phy Cc: agross, linux-kernel, andersson, bhupesh.sharma, bhupesh.linux, krzysztof.kozlowski, robh+dt, konrad.dybcio, kishon, vkoul, krzysztof.kozlowski+dt The USB3 SS (QMP) PHY found on Qualcomm SM6115 & QCM2290 SoCs is similar to sm8150 QMP PHY (which is named as 'usb_1_qmpphy' in sm8150 dtsi file, see [1]) in the sense that the phy subnode supports 6 regs, namely TX lane 1, RX lane 1, PCS, TX lane 2, RX lane 2 and PCS_MISC. Update the dt-bindings document to reflect the same. [1]. https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/tree/arch/arm64/boot/dts/qcom/sm8150.dtsi#n3394 Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org> --- .../devicetree/bindings/phy/qcom,msm8996-qmp-usb3-phy.yaml | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/Documentation/devicetree/bindings/phy/qcom,msm8996-qmp-usb3-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,msm8996-qmp-usb3-phy.yaml index e81a38281f8c..1575dc70bcf2 100644 --- a/Documentation/devicetree/bindings/phy/qcom,msm8996-qmp-usb3-phy.yaml +++ b/Documentation/devicetree/bindings/phy/qcom,msm8996-qmp-usb3-phy.yaml @@ -276,7 +276,9 @@ allOf: compatible: contains: enum: + - qcom,qcm2290-qmp-usb3-phy - qcom,sdm845-qmp-usb3-phy + - qcom,sm6115-qmp-usb3-phy - qcom,sm8150-qmp-usb3-phy - qcom,sm8350-qmp-usb3-phy - qcom,sm8450-qmp-usb3-phy @@ -318,12 +320,10 @@ allOf: enum: - qcom,ipq6018-qmp-usb3-phy - qcom,ipq8074-qmp-usb3-phy - - qcom,qcm2290-qmp-usb3-phy - qcom,sc7180-qmp-usb3-phy - qcom,sc8180x-qmp-usb3-phy - qcom,sdx55-qmp-usb3-uni-phy - qcom,sdx65-qmp-usb3-uni-phy - - qcom,sm6115-qmp-usb3-phy - qcom,sm8150-qmp-usb3-uni-phy - qcom,sm8250-qmp-usb3-phy then: -- 2.38.1 -- linux-phy mailing list linux-phy@lists.infradead.org https://lists.infradead.org/mailman/listinfo/linux-phy ^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH v5 1/2] dt-bindings: phy: qcom,qmp-usb: Fix phy subnode for SM6115 & QCM2290 USB3 PHY 2023-04-05 19:16 ` [PATCH v5 1/2] dt-bindings: phy: qcom,qmp-usb: Fix phy subnode for SM6115 & QCM2290 USB3 PHY Bhupesh Sharma @ 2023-04-05 19:38 ` Dmitry Baryshkov 0 siblings, 0 replies; 6+ messages in thread From: Dmitry Baryshkov @ 2023-04-05 19:38 UTC (permalink / raw) To: Bhupesh Sharma, linux-arm-msm, devicetree, linux-phy Cc: agross, linux-kernel, andersson, bhupesh.linux, krzysztof.kozlowski, robh+dt, konrad.dybcio, kishon, vkoul, krzysztof.kozlowski+dt On 05/04/2023 22:16, Bhupesh Sharma wrote: > The USB3 SS (QMP) PHY found on Qualcomm SM6115 & QCM2290 SoCs is > similar to sm8150 QMP PHY (which is named as 'usb_1_qmpphy' in > sm8150 dtsi file, see [1]) in the sense that the phy subnode supports usb_1_qmpphy on sm8150 is a USB+DP PHY, see https://patchwork.kernel.org/project/linux-phy/patch/20230324215550.1966809-4-dmitry.baryshkov@linaro.org/ > 6 regs, namely TX lane 1, RX lane 1, PCS, TX lane 2, RX lane 2 and > PCS_MISC. > > Update the dt-bindings document to reflect the same. > > [1]. https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/tree/arch/arm64/boot/dts/qcom/sm8150.dtsi#n3394 > > Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> > Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org> > --- > .../devicetree/bindings/phy/qcom,msm8996-qmp-usb3-phy.yaml | 4 ++-- > 1 file changed, 2 insertions(+), 2 deletions(-) > > diff --git a/Documentation/devicetree/bindings/phy/qcom,msm8996-qmp-usb3-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,msm8996-qmp-usb3-phy.yaml > index e81a38281f8c..1575dc70bcf2 100644 > --- a/Documentation/devicetree/bindings/phy/qcom,msm8996-qmp-usb3-phy.yaml > +++ b/Documentation/devicetree/bindings/phy/qcom,msm8996-qmp-usb3-phy.yaml > @@ -276,7 +276,9 @@ allOf: > compatible: > contains: > enum: > + - qcom,qcm2290-qmp-usb3-phy > - qcom,sdm845-qmp-usb3-phy > + - qcom,sm6115-qmp-usb3-phy > - qcom,sm8150-qmp-usb3-phy > - qcom,sm8350-qmp-usb3-phy > - qcom,sm8450-qmp-usb3-phy > @@ -318,12 +320,10 @@ allOf: > enum: > - qcom,ipq6018-qmp-usb3-phy > - qcom,ipq8074-qmp-usb3-phy > - - qcom,qcm2290-qmp-usb3-phy > - qcom,sc7180-qmp-usb3-phy > - qcom,sc8180x-qmp-usb3-phy > - qcom,sdx55-qmp-usb3-uni-phy > - qcom,sdx65-qmp-usb3-uni-phy > - - qcom,sm6115-qmp-usb3-phy > - qcom,sm8150-qmp-usb3-uni-phy > - qcom,sm8250-qmp-usb3-phy > then: -- With best wishes Dmitry -- linux-phy mailing list linux-phy@lists.infradead.org https://lists.infradead.org/mailman/listinfo/linux-phy ^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH v5 2/2] arm64: dts: qcom: sm6115: Add USB SS qmp phy node 2023-04-05 19:16 [PATCH v5 0/2] Enable USB SS qmp phy for Qualcomm SM6115 SoC Bhupesh Sharma 2023-04-05 19:16 ` [PATCH v5 1/2] dt-bindings: phy: qcom,qmp-usb: Fix phy subnode for SM6115 & QCM2290 USB3 PHY Bhupesh Sharma @ 2023-04-05 19:16 ` Bhupesh Sharma 2023-04-05 19:36 ` Dmitry Baryshkov 1 sibling, 1 reply; 6+ messages in thread From: Bhupesh Sharma @ 2023-04-05 19:16 UTC (permalink / raw) To: linux-arm-msm, devicetree, linux-phy Cc: agross, linux-kernel, andersson, bhupesh.sharma, bhupesh.linux, krzysztof.kozlowski, robh+dt, konrad.dybcio, kishon, vkoul, krzysztof.kozlowski+dt Add USB superspeed qmp phy node to dtsi. Make sure that the various board dts files (which include sm4250.dtsi file) continue to work as intended. Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org> --- .../boot/dts/qcom/sm4250-oneplus-billie2.dts | 3 ++ arch/arm64/boot/dts/qcom/sm6115.dtsi | 36 +++++++++++++++++-- .../boot/dts/qcom/sm6115p-lenovo-j606f.dts | 3 ++ 3 files changed, 40 insertions(+), 2 deletions(-) diff --git a/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts b/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts index a1f0622db5a0..75951fd439df 100644 --- a/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts +++ b/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts @@ -242,6 +242,9 @@ &usb { &usb_dwc3 { maximum-speed = "high-speed"; dr_mode = "peripheral"; + + phys = <&usb_hsphy>; + phy-names = "usb2-phy"; }; &usb_hsphy { diff --git a/arch/arm64/boot/dts/qcom/sm6115.dtsi b/arch/arm64/boot/dts/qcom/sm6115.dtsi index 2a51c938bbcb..b2fa565e4816 100644 --- a/arch/arm64/boot/dts/qcom/sm6115.dtsi +++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi @@ -650,6 +650,38 @@ usb_hsphy: phy@1613000 { status = "disabled"; }; + usb_qmpphy: phy@1615000 { + compatible = "qcom,sm6115-qmp-usb3-phy"; + reg = <0x0 0x01615000 0x0 0x200>; + clocks = <&gcc GCC_AHB2PHY_USB_CLK>, + <&gcc GCC_USB3_PRIM_CLKREF_CLK>, + <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>; + clock-names = "cfg_ahb", + "ref", + "com_aux"; + resets = <&gcc GCC_USB3PHY_PHY_PRIM_SP0_BCR>, + <&gcc GCC_USB3_PHY_PRIM_SP0_BCR>; + reset-names = "phy_phy", "phy"; + status = "disabled"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + usb_ssphy: phy@1615200 { + reg = <0x0 0x01615200 0x0 0x200>, + <0x0 0x01615400 0x0 0x200>, + <0x0 0x01615c00 0x0 0x400>, + <0x0 0x01615600 0x0 0x200>, + <0x0 0x01615800 0x0 0x200>, + <0x0 0x01615a00 0x0 0x100>; + #clock-cells = <0>; + #phy-cells = <0>; + clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; + clock-names = "pipe0"; + clock-output-names = "usb3_phy_pipe_clk_src"; + }; + }; + qfprom@1b40000 { compatible = "qcom,sm6115-qfprom", "qcom,qfprom"; reg = <0x0 0x01b40000 0x0 0x7000>; @@ -1100,8 +1132,8 @@ usb_dwc3: usb@4e00000 { compatible = "snps,dwc3"; reg = <0x0 0x04e00000 0x0 0xcd00>; interrupts = <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>; - phys = <&usb_hsphy>; - phy-names = "usb2-phy"; + phys = <&usb_hsphy>, <&usb_ssphy>; + phy-names = "usb2-phy", "usb3-phy"; iommus = <&apps_smmu 0x120 0x0>; snps,dis_u2_susphy_quirk; snps,dis_enblslpm_quirk; diff --git a/arch/arm64/boot/dts/qcom/sm6115p-lenovo-j606f.dts b/arch/arm64/boot/dts/qcom/sm6115p-lenovo-j606f.dts index 10c9d338446c..d60cc024749b 100644 --- a/arch/arm64/boot/dts/qcom/sm6115p-lenovo-j606f.dts +++ b/arch/arm64/boot/dts/qcom/sm6115p-lenovo-j606f.dts @@ -280,6 +280,9 @@ &usb { &usb_dwc3 { maximum-speed = "high-speed"; dr_mode = "peripheral"; + + phys = <&usb_hsphy>; + phy-names = "usb2-phy"; }; &usb_hsphy { -- 2.38.1 -- linux-phy mailing list linux-phy@lists.infradead.org https://lists.infradead.org/mailman/listinfo/linux-phy ^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH v5 2/2] arm64: dts: qcom: sm6115: Add USB SS qmp phy node 2023-04-05 19:16 ` [PATCH v5 2/2] arm64: dts: qcom: sm6115: Add USB SS qmp phy node Bhupesh Sharma @ 2023-04-05 19:36 ` Dmitry Baryshkov 2023-04-05 19:55 ` Bhupesh Sharma 0 siblings, 1 reply; 6+ messages in thread From: Dmitry Baryshkov @ 2023-04-05 19:36 UTC (permalink / raw) To: Bhupesh Sharma Cc: linux-arm-msm, devicetree, linux-phy, agross, linux-kernel, andersson, bhupesh.linux, krzysztof.kozlowski, robh+dt, konrad.dybcio, kishon, vkoul, krzysztof.kozlowski+dt On Wed, 5 Apr 2023 at 22:19, Bhupesh Sharma <bhupesh.sharma@linaro.org> wrote: > > Add USB superspeed qmp phy node to dtsi. > > Make sure that the various board dts files (which include sm4250.dtsi file) > continue to work as intended. > > Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org> > --- > .../boot/dts/qcom/sm4250-oneplus-billie2.dts | 3 ++ > arch/arm64/boot/dts/qcom/sm6115.dtsi | 36 +++++++++++++++++-- > .../boot/dts/qcom/sm6115p-lenovo-j606f.dts | 3 ++ > 3 files changed, 40 insertions(+), 2 deletions(-) > > diff --git a/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts b/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts > index a1f0622db5a0..75951fd439df 100644 > --- a/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts > +++ b/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts > @@ -242,6 +242,9 @@ &usb { > &usb_dwc3 { > maximum-speed = "high-speed"; > dr_mode = "peripheral"; > + > + phys = <&usb_hsphy>; > + phy-names = "usb2-phy"; > }; > > &usb_hsphy { > diff --git a/arch/arm64/boot/dts/qcom/sm6115.dtsi b/arch/arm64/boot/dts/qcom/sm6115.dtsi > index 2a51c938bbcb..b2fa565e4816 100644 > --- a/arch/arm64/boot/dts/qcom/sm6115.dtsi > +++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi > @@ -650,6 +650,38 @@ usb_hsphy: phy@1613000 { > status = "disabled"; > }; > > + usb_qmpphy: phy@1615000 { > + compatible = "qcom,sm6115-qmp-usb3-phy"; > + reg = <0x0 0x01615000 0x0 0x200>; > + clocks = <&gcc GCC_AHB2PHY_USB_CLK>, > + <&gcc GCC_USB3_PRIM_CLKREF_CLK>, > + <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>; > + clock-names = "cfg_ahb", > + "ref", > + "com_aux"; > + resets = <&gcc GCC_USB3PHY_PHY_PRIM_SP0_BCR>, > + <&gcc GCC_USB3_PHY_PRIM_SP0_BCR>; > + reset-names = "phy_phy", "phy"; > + status = "disabled"; > + #address-cells = <2>; > + #size-cells = <2>; > + ranges; > + > + usb_ssphy: phy@1615200 { > + reg = <0x0 0x01615200 0x0 0x200>, > + <0x0 0x01615400 0x0 0x200>, > + <0x0 0x01615c00 0x0 0x400>, > + <0x0 0x01615600 0x0 0x200>, > + <0x0 0x01615800 0x0 0x200>, > + <0x0 0x01615a00 0x0 0x100>; > + #clock-cells = <0>; > + #phy-cells = <0>; > + clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; > + clock-names = "pipe0"; > + clock-output-names = "usb3_phy_pipe_clk_src"; > + }; > + }; I can repeat previous message: Please update this to newer style bindings (see qcom,sc8280xp-qmp-usb3-uni-phy.yaml). We are going to switch all QMP PHYs to use a newer style of bindings. I have started the work to convert existing usecases. As you are adding a new DT node, please add it in a good shape from the beginning. > + > qfprom@1b40000 { > compatible = "qcom,sm6115-qfprom", "qcom,qfprom"; > reg = <0x0 0x01b40000 0x0 0x7000>; > @@ -1100,8 +1132,8 @@ usb_dwc3: usb@4e00000 { > compatible = "snps,dwc3"; > reg = <0x0 0x04e00000 0x0 0xcd00>; > interrupts = <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>; > - phys = <&usb_hsphy>; > - phy-names = "usb2-phy"; > + phys = <&usb_hsphy>, <&usb_ssphy>; > + phy-names = "usb2-phy", "usb3-phy"; > iommus = <&apps_smmu 0x120 0x0>; > snps,dis_u2_susphy_quirk; > snps,dis_enblslpm_quirk; > diff --git a/arch/arm64/boot/dts/qcom/sm6115p-lenovo-j606f.dts b/arch/arm64/boot/dts/qcom/sm6115p-lenovo-j606f.dts > index 10c9d338446c..d60cc024749b 100644 > --- a/arch/arm64/boot/dts/qcom/sm6115p-lenovo-j606f.dts > +++ b/arch/arm64/boot/dts/qcom/sm6115p-lenovo-j606f.dts > @@ -280,6 +280,9 @@ &usb { > &usb_dwc3 { > maximum-speed = "high-speed"; > dr_mode = "peripheral"; > + > + phys = <&usb_hsphy>; > + phy-names = "usb2-phy"; > }; > > &usb_hsphy { > -- > 2.38.1 > -- With best wishes Dmitry -- linux-phy mailing list linux-phy@lists.infradead.org https://lists.infradead.org/mailman/listinfo/linux-phy ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH v5 2/2] arm64: dts: qcom: sm6115: Add USB SS qmp phy node 2023-04-05 19:36 ` Dmitry Baryshkov @ 2023-04-05 19:55 ` Bhupesh Sharma 0 siblings, 0 replies; 6+ messages in thread From: Bhupesh Sharma @ 2023-04-05 19:55 UTC (permalink / raw) To: Dmitry Baryshkov Cc: linux-arm-msm, devicetree, linux-phy, agross, linux-kernel, andersson, bhupesh.linux, krzysztof.kozlowski, robh+dt, konrad.dybcio, kishon, vkoul, krzysztof.kozlowski+dt On Thu, 6 Apr 2023 at 01:06, Dmitry Baryshkov <dmitry.baryshkov@linaro.org> wrote: > > On Wed, 5 Apr 2023 at 22:19, Bhupesh Sharma <bhupesh.sharma@linaro.org> wrote: > > > > Add USB superspeed qmp phy node to dtsi. > > > > Make sure that the various board dts files (which include sm4250.dtsi file) > > continue to work as intended. > > > > Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org> > > --- > > .../boot/dts/qcom/sm4250-oneplus-billie2.dts | 3 ++ > > arch/arm64/boot/dts/qcom/sm6115.dtsi | 36 +++++++++++++++++-- > > .../boot/dts/qcom/sm6115p-lenovo-j606f.dts | 3 ++ > > 3 files changed, 40 insertions(+), 2 deletions(-) > > > > diff --git a/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts b/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts > > index a1f0622db5a0..75951fd439df 100644 > > --- a/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts > > +++ b/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts > > @@ -242,6 +242,9 @@ &usb { > > &usb_dwc3 { > > maximum-speed = "high-speed"; > > dr_mode = "peripheral"; > > + > > + phys = <&usb_hsphy>; > > + phy-names = "usb2-phy"; > > }; > > > > &usb_hsphy { > > diff --git a/arch/arm64/boot/dts/qcom/sm6115.dtsi b/arch/arm64/boot/dts/qcom/sm6115.dtsi > > index 2a51c938bbcb..b2fa565e4816 100644 > > --- a/arch/arm64/boot/dts/qcom/sm6115.dtsi > > +++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi > > @@ -650,6 +650,38 @@ usb_hsphy: phy@1613000 { > > status = "disabled"; > > }; > > > > + usb_qmpphy: phy@1615000 { > > + compatible = "qcom,sm6115-qmp-usb3-phy"; > > + reg = <0x0 0x01615000 0x0 0x200>; > > + clocks = <&gcc GCC_AHB2PHY_USB_CLK>, > > + <&gcc GCC_USB3_PRIM_CLKREF_CLK>, > > + <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>; > > + clock-names = "cfg_ahb", > > + "ref", > > + "com_aux"; > > + resets = <&gcc GCC_USB3PHY_PHY_PRIM_SP0_BCR>, > > + <&gcc GCC_USB3_PHY_PRIM_SP0_BCR>; > > + reset-names = "phy_phy", "phy"; > > + status = "disabled"; > > + #address-cells = <2>; > > + #size-cells = <2>; > > + ranges; > > + > > + usb_ssphy: phy@1615200 { > > + reg = <0x0 0x01615200 0x0 0x200>, > > + <0x0 0x01615400 0x0 0x200>, > > + <0x0 0x01615c00 0x0 0x400>, > > + <0x0 0x01615600 0x0 0x200>, > > + <0x0 0x01615800 0x0 0x200>, > > + <0x0 0x01615a00 0x0 0x100>; > > + #clock-cells = <0>; > > + #phy-cells = <0>; > > + clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; > > + clock-names = "pipe0"; > > + clock-output-names = "usb3_phy_pipe_clk_src"; > > + }; > > + }; > > I can repeat previous message: > > Please update this to newer style bindings (see > qcom,sc8280xp-qmp-usb3-uni-phy.yaml). > > We are going to switch all QMP PHYs to use a newer style of bindings. > I have started the work to convert existing usecases. As you are > adding a new DT node, please add it in a good shape from the > beginning. Your earlier message was not clear and I sent out a reply for the cover letter query you had, but got no reply. I think a pointer to <https://patchwork.kernel.org/project/linux-phy/list/?series=733714> would have been more clear. I will rework and send v6 accordingly. Thanks, Bhupesh -- linux-phy mailing list linux-phy@lists.infradead.org https://lists.infradead.org/mailman/listinfo/linux-phy ^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2023-04-05 19:55 UTC | newest] Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2023-04-05 19:16 [PATCH v5 0/2] Enable USB SS qmp phy for Qualcomm SM6115 SoC Bhupesh Sharma 2023-04-05 19:16 ` [PATCH v5 1/2] dt-bindings: phy: qcom,qmp-usb: Fix phy subnode for SM6115 & QCM2290 USB3 PHY Bhupesh Sharma 2023-04-05 19:38 ` Dmitry Baryshkov 2023-04-05 19:16 ` [PATCH v5 2/2] arm64: dts: qcom: sm6115: Add USB SS qmp phy node Bhupesh Sharma 2023-04-05 19:36 ` Dmitry Baryshkov 2023-04-05 19:55 ` Bhupesh Sharma
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).