[PATCH v6 0/8] Enable IPQ9754 USB

[PATCH v6 0/8] Enable IPQ9754 USB

[Varadarajan Narayanan]

This patch series adds the relevant phy and controller
configurations for enabling USB on IPQ9754

Depends on:
https://lore.kernel.org/all/20230217142030.16012-1-quic_devipriy@quicinc.com/

[v6]:
        - Incorporated review comments
	- Resolve make dtbs_check messages
	- Fixed pcs_usb offset
	- Board dts file name changed

[v5]:
        - Incorporated review comments
	- 'make dtbs_check' giving the following messages since
	  ipq9574 doesn't have power domains. Hope this is ok

		/local/mnt/workspace/varada/varda-linux/arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dtb: phy@7d000: 'power-domains' is a required property
        	From schema: /local/mnt/workspace/varada/varda-linux/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml
		/local/mnt/workspace/varada/varda-linux/arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dtb: usb@8a00000: 'power-domains' is a required property
        	From schema: /local/mnt/workspace/varada/varda-linux/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml

	- Move qmp phy DT node to newer specification

[v4]:
        - Incorporated review comments
	- Address all 'make dtbs_check' errors

[v3]:
        - Incorporated review comments regarding coding style

[v2]:
        - Incorporated review comments regarding coding style,
          maintaining sorted order of entries and unused phy register
          offsets
        - Removed NOC clock entries from DT node (will be implemented
          later with interconnect support)
        - Fixed 'make dtbs_check' errors/warnings

[v1]:
        https://lore.kernel.org/linux-arm-msm/5dac3aa4-8dc7-f9eb-5cf3-b361efdc9494@linaro.org/T/

Varadarajan Narayanan (8):
  dt-bindings: phy: qcom,qusb2: Document IPQ9574 compatible
  dt-bindings: phy: qcom,qmp-usb: Add IPQ9574 USB3 PHY
  dt-bindings: usb: dwc3: Add IPQ9574 compatible
  clk: qcom: gcc-ipq9574: Add USB related clocks
  phy: qcom-qusb2: add QUSB2 support for IPQ9574
  phy: qcom: qmp: Update IPQ9574 USB Phy initialization Sequence
  arm64: dts: qcom: ipq9574: Add USB related nodes
  arm64: dts: qcom: ipq9574: Enable USB

 .../devicetree/bindings/phy/qcom,qusb2-phy.yaml    |   3 +-
 .../phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml        |   2 +-
 .../devicetree/bindings/usb/qcom,dwc3.yaml         |  22 +++-
 arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts        |  16 +++
 arch/arm64/boot/dts/qcom/ipq9574.dtsi              | 120 +++++++++++++++++++++
 drivers/clk/qcom/gcc-ipq9574.c                     |  37 +++++++
 drivers/phy/qualcomm/phy-qcom-qmp-usb.c            | 115 ++++++++++++++++++++
 drivers/phy/qualcomm/phy-qcom-qusb2.c              |   3 +
 include/dt-bindings/clock/qcom,ipq9574-gcc.h       |   2 +
 9 files changed, 317 insertions(+), 3 deletions(-)

-- 
2.7.4


-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

[PATCH v6 1/8] dt-bindings: phy: qcom,qusb2: Document IPQ9574 compatible

[Varadarajan Narayanan]

Document the compatible string used for the qusb2 phy in IPQ9574.

Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>

---
 Changes in v5:
	- Undo v4 changes

 Changes in v4:
	- Remove constraints not applicable to IPQ9574

 Changes in v3:
	- Maintain the proper sorted order

 Changes in v2:
	- Moved ipq6018 to the proper place and placed ipq9574
	  next to it as suggested by Dmitry
---
 Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml
index 543c1a2..95eecba 100644
--- a/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml
@@ -18,13 +18,14 @@ properties:
     oneOf:
       - items:
           - enum:
+              - qcom,ipq6018-qusb2-phy
               - qcom,ipq8074-qusb2-phy
+              - qcom,ipq9574-qusb2-phy
               - qcom,msm8953-qusb2-phy
               - qcom,msm8996-qusb2-phy
               - qcom,msm8998-qusb2-phy
               - qcom,qcm2290-qusb2-phy
               - qcom,sdm660-qusb2-phy
-              - qcom,ipq6018-qusb2-phy
               - qcom,sm4250-qusb2-phy
               - qcom,sm6115-qusb2-phy
       - items:
-- 
2.7.4


-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

[PATCH v6 2/8] dt-bindings: phy: qcom,qmp-usb: Add IPQ9574 USB3 PHY

[Varadarajan Narayanan]

Add dt-bindings for USB3 PHY found on Qualcomm IPQ9574

Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
---
 Changes in v6:
	- Made power-domains optional

Note: In the earlier patch sets, had used the (legacy)
specification available in qcom,msm8996-qmp-usb3-phy.yaml. Moved
to newer specification in qcom,sc8280xp-qmp-usb3-uni-phy.yaml
---
 .../devicetree/bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml         | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml
index 16fce10..0c0a548 100644
--- a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml
@@ -16,6 +16,7 @@ description:
 properties:
   compatible:
     enum:
+      - qcom,ipq9574-qmp-usb3-phy
       - qcom,sc8280xp-qmp-usb3-uni-phy
 
   reg:
@@ -60,7 +61,6 @@ required:
   - reg
   - clocks
   - clock-names
-  - power-domains
   - resets
   - reset-names
   - vdda-phy-supply
-- 
2.7.4


-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

[PATCH v6 3/8] dt-bindings: usb: dwc3: Add IPQ9574 compatible

[Varadarajan Narayanan]

Document the IPQ9574 dwc3 compatible.

Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
---
 Changes in v6:
	- Made power-domains as optional
	- Resolved all 'make dtbs_check' messages

 Changes in v5:
	- Restore removed constraints

 Changes in v4:
	- Update other relevant sections
	- Remove constraints not applicable to IPQ9574
---
 .../devicetree/bindings/usb/qcom,dwc3.yaml         | 22 +++++++++++++++++++++-
 1 file changed, 21 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml
index d842819..f5dd268 100644
--- a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml
+++ b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml
@@ -17,6 +17,7 @@ properties:
           - qcom,ipq6018-dwc3
           - qcom,ipq8064-dwc3
           - qcom,ipq8074-dwc3
+          - qcom,ipq9574-dwc3
           - qcom,msm8953-dwc3
           - qcom,msm8994-dwc3
           - qcom,msm8996-dwc3
@@ -133,7 +134,6 @@ required:
   - "#address-cells"
   - "#size-cells"
   - ranges
-  - power-domains
   - clocks
   - clock-names
   - interrupts
@@ -197,6 +197,26 @@ allOf:
             - const: iface
             - const: sleep
             - const: mock_utmi
+      required:
+        - power-domains
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,ipq9574-dwc3
+    then:
+      properties:
+        clocks:
+          maxItems: 5
+        clock-names:
+          items:
+            - const: cfg_noc
+            - const: core
+            - const: iface
+            - const: sleep
+            - const: mock_utmi
 
   - if:
       properties:
-- 
2.7.4


-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

[PATCH v6 4/8] clk: qcom: gcc-ipq9574: Add USB related clocks

[Varadarajan Narayanan]

Add the clocks needed for enabling USB in IPQ9574

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
---
 Changes in v2:
	- Fixed coding style issues
---
 drivers/clk/qcom/gcc-ipq9574.c               | 37 ++++++++++++++++++++++++++++
 include/dt-bindings/clock/qcom,ipq9574-gcc.h |  2 ++
 2 files changed, 39 insertions(+)

diff --git a/drivers/clk/qcom/gcc-ipq9574.c b/drivers/clk/qcom/gcc-ipq9574.c
index c855954..f19e9cb 100644
--- a/drivers/clk/qcom/gcc-ipq9574.c
+++ b/drivers/clk/qcom/gcc-ipq9574.c
@@ -2041,6 +2041,41 @@ static struct clk_regmap_mux usb0_pipe_clk_src = {
 	},
 };
 
+static struct clk_branch gcc_usb0_pipe_clk = {
+	.halt_reg = 0x2c054,
+	.halt_check = BRANCH_HALT_DELAY,
+	.clkr = {
+		.enable_reg = 0x2c054,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_usb0_pipe_clk",
+			.parent_hws = (const struct clk_hw *[]) {
+				&usb0_pipe_clk_src.clkr.hw
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_usb0_sleep_clk = {
+	.halt_reg = 0x2c058,
+	.clkr = {
+		.enable_reg = 0x2c058,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_usb0_sleep_clk",
+			.parent_hws = (const struct clk_hw *[]) {
+				&gcc_sleep_clk_src.clkr.hw
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
 static const struct freq_tbl ftbl_sdcc_apps_clk_src[] = {
 	F(144000, P_XO, 16, 12, 125),
 	F(400000, P_XO, 12, 1, 5),
@@ -4008,6 +4043,8 @@ static struct clk_regmap *gcc_ipq9574_clks[] = {
 	[GCC_USB0_MOCK_UTMI_CLK] = &gcc_usb0_mock_utmi_clk.clkr,
 	[USB0_PIPE_CLK_SRC] = &usb0_pipe_clk_src.clkr,
 	[GCC_USB0_PHY_CFG_AHB_CLK] = &gcc_usb0_phy_cfg_ahb_clk.clkr,
+	[GCC_USB0_PIPE_CLK] = &gcc_usb0_pipe_clk.clkr,
+	[GCC_USB0_SLEEP_CLK] = &gcc_usb0_sleep_clk.clkr,
 	[SDCC1_APPS_CLK_SRC] = &sdcc1_apps_clk_src.clkr,
 	[GCC_SDCC1_APPS_CLK] = &gcc_sdcc1_apps_clk.clkr,
 	[SDCC1_ICE_CORE_CLK_SRC] = &sdcc1_ice_core_clk_src.clkr,
diff --git a/include/dt-bindings/clock/qcom,ipq9574-gcc.h b/include/dt-bindings/clock/qcom,ipq9574-gcc.h
index 2d7b460..2cb02f7 100644
--- a/include/dt-bindings/clock/qcom,ipq9574-gcc.h
+++ b/include/dt-bindings/clock/qcom,ipq9574-gcc.h
@@ -214,4 +214,6 @@
 #define GCC_PCIE1_PIPE_CLK				205
 #define GCC_PCIE2_PIPE_CLK				206
 #define GCC_PCIE3_PIPE_CLK				207
+#define GCC_USB0_PIPE_CLK				208
+#define GCC_USB0_SLEEP_CLK				209
 #endif
-- 
2.7.4


-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

[PATCH v6 5/8] phy: qcom-qusb2: add QUSB2 support for IPQ9574

[Varadarajan Narayanan]

Add the phy init sequence for the Super Speed ports found
on IPQ9574.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
---
  Changes in v2:
	- Place the entry such that the list continues to be sorted
---
 drivers/phy/qualcomm/phy-qcom-qusb2.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/phy/qualcomm/phy-qcom-qusb2.c b/drivers/phy/qualcomm/phy-qcom-qusb2.c
index 2ef638b..bec6e40 100644
--- a/drivers/phy/qualcomm/phy-qcom-qusb2.c
+++ b/drivers/phy/qualcomm/phy-qcom-qusb2.c
@@ -912,6 +912,9 @@ static const struct of_device_id qusb2_phy_of_match_table[] = {
 		.compatible	= "qcom,ipq8074-qusb2-phy",
 		.data		= &msm8996_phy_cfg,
 	}, {
+		.compatible	= "qcom,ipq9574-qusb2-phy",
+		.data		= &ipq6018_phy_cfg,
+	}, {
 		.compatible	= "qcom,msm8953-qusb2-phy",
 		.data		= &msm8996_phy_cfg,
 	}, {
-- 
2.7.4


-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

[PATCH v6 6/8] phy: qcom: qmp: Update IPQ9574 USB Phy initialization Sequence

[Varadarajan Narayanan]

Updated USB QMP PHY Init sequence based on HPG for IPQ9574.
Reused clock and reset list from existing targets.

Signed-off-by: Praveenkumar I <quic_ipkumar@quicinc.com>
Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
---
 Changes in v6:
	- Fix pcs_usb offset
	- Use correct clock names array
 Changes in v5:
	- Fix additional review comments
	- Use V3 register offsets
 Changes in v4:
	- Use qmp_usb_offsets for register space access
 Changes in v3:
	- Fix hex captitalization
 Changes in v2:
	- Removed unused phy register offsets
	- Moved the clock entries to the correct place
	- Maintain sorted order
---
 drivers/phy/qualcomm/phy-qcom-qmp-usb.c | 115 ++++++++++++++++++++++++++++++++
 1 file changed, 115 insertions(+)

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-usb.c b/drivers/phy/qualcomm/phy-qcom-qmp-usb.c
index a49711c..11a76a4 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-usb.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-usb.c
@@ -139,6 +139,88 @@ static const unsigned int qmp_v5_usb3phy_regs_layout[QPHY_LAYOUT_SIZE] = {
 	[QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR] = QPHY_V5_PCS_USB3_LFPS_RXTERM_IRQ_CLEAR,
 };
 
+static const struct qmp_phy_init_tbl ipq9574_usb3_serdes_tbl[] = {
+	QMP_PHY_INIT_CFG(QSERDES_COM_SYSCLK_EN_SEL, 0x1a),
+	QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x08),
+	QMP_PHY_INIT_CFG(QSERDES_COM_CLK_SELECT, 0x30),
+	QMP_PHY_INIT_CFG(QSERDES_COM_BG_TRIM, 0x0f),
+	QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_FASTLOCK_FO_GAIN, 0x0b),
+	QMP_PHY_INIT_CFG(QSERDES_COM_SVS_MODE_CLK_SEL, 0x01),
+	QMP_PHY_INIT_CFG(QSERDES_COM_HSCLK_SEL, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_COM_CMN_CONFIG, 0x06),
+	QMP_PHY_INIT_CFG(QSERDES_COM_PLL_IVCO, 0x0f),
+	QMP_PHY_INIT_CFG(QSERDES_COM_SYS_CLK_CTRL, 0x06),
+	/* PLL and Loop filter settings */
+	QMP_PHY_INIT_CFG(QSERDES_COM_DEC_START_MODE0, 0x68),
+	QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START1_MODE0, 0xab),
+	QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START2_MODE0, 0xaa),
+	QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START3_MODE0, 0x02),
+	QMP_PHY_INIT_CFG(QSERDES_COM_CP_CTRL_MODE0, 0x09),
+	QMP_PHY_INIT_CFG(QSERDES_COM_PLL_RCTRL_MODE0, 0x16),
+	QMP_PHY_INIT_CFG(QSERDES_COM_PLL_CCTRL_MODE0, 0x28),
+	QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN0_MODE0, 0xa0),
+	QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP1_MODE0, 0xaa),
+	QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP2_MODE0, 0x29),
+	QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP3_MODE0, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_COM_CORE_CLK_EN, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP_CFG, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_MAP, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_COM_BG_TIMER, 0x0a),
+	/* SSC settings */
+	QMP_PHY_INIT_CFG(QSERDES_COM_SSC_EN_CENTER, 0x01),
+	QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER1, 0x7d),
+	QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER2, 0x01),
+	QMP_PHY_INIT_CFG(QSERDES_COM_SSC_ADJ_PER1, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_COM_SSC_ADJ_PER2, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE1, 0x0a),
+	QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE2, 0x05),
+};
+
+static const struct qmp_phy_init_tbl ipq9574_usb3_tx_tbl[] = {
+	QMP_PHY_INIT_CFG(QSERDES_TX_HIGHZ_TRANSCEIVEREN_BIAS_DRVR_EN, 0x45),
+	QMP_PHY_INIT_CFG(QSERDES_TX_RCV_DETECT_LVL_2, 0x12),
+	QMP_PHY_INIT_CFG(QSERDES_TX_LANE_MODE, 0x06),
+};
+
+static const struct qmp_phy_init_tbl ipq9574_usb3_rx_tbl[] = {
+	QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SO_GAIN, 0x06),
+	QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2, 0x02),
+	QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL3, 0x6c),
+	QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4c),
+	QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL4, 0xb8),
+	QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x77),
+	QMP_PHY_INIT_CFG(QSERDES_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
+	QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_CNTRL, 0x03),
+	QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_DEGLITCH_CNTRL, 0x16),
+	QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_ENABLES, 0x0c),
+};
+
+static const struct qmp_phy_init_tbl ipq9574_usb3_pcs_tbl[] = {
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V0, 0x15),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V0, 0x0e),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL2, 0x83),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL1, 0x02),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_L, 0x09),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_H_TOL, 0xa2),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_MAN_CODE, 0x85),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG1, 0xd1),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG2, 0x1f),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG3, 0x47),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_POWER_STATE_CONFIG2, 0x1b),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_RXEQTRAINING_WAIT_TIME, 0x75),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_RXEQTRAINING_RUN_TIME, 0x13),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_LFPS_TX_ECSTART_EQTLOCK, 0x86),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_PWRUP_RESET_DLY_TIME_AUXCLK, 0x04),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_TSYNC_RSYNC_TIME, 0x44),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_L, 0xe7),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_H, 0x03),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_U3_L, 0x40),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_U3_H, 0x00),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_RX_SIGDET_LVL, 0x88),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V0, 0x17),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V0, 0x0f),
+};
+
 static const struct qmp_phy_init_tbl ipq8074_usb3_serdes_tbl[] = {
 	QMP_PHY_INIT_CFG(QSERDES_COM_SYSCLK_EN_SEL, 0x1a),
 	QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x08),
@@ -1558,6 +1640,14 @@ static const char * const qmp_phy_vreg_l[] = {
 	"vdda-phy", "vdda-pll",
 };
 
+static const struct qmp_usb_offsets qmp_usb_offsets_ipq9574 = {
+	.serdes		= 0,
+	.pcs		= 0x800,
+	.pcs_usb	= 0x800,
+	.tx		= 0x200,
+	.rx		= 0x400,
+};
+
 static const struct qmp_usb_offsets qmp_usb_offsets_v5 = {
 	.serdes		= 0,
 	.pcs		= 0x0200,
@@ -1586,6 +1676,28 @@ static const struct qmp_phy_cfg ipq8074_usb3phy_cfg = {
 	.regs			= qmp_v3_usb3phy_regs_layout,
 };
 
+static const struct qmp_phy_cfg ipq9574_usb3phy_cfg = {
+	.lanes			= 1,
+
+	.offsets		= &qmp_usb_offsets_ipq9574,
+
+	.serdes_tbl		= ipq9574_usb3_serdes_tbl,
+	.serdes_tbl_num		= ARRAY_SIZE(ipq9574_usb3_serdes_tbl),
+	.tx_tbl			= ipq9574_usb3_tx_tbl,
+	.tx_tbl_num		= ARRAY_SIZE(ipq9574_usb3_tx_tbl),
+	.rx_tbl			= ipq9574_usb3_rx_tbl,
+	.rx_tbl_num		= ARRAY_SIZE(ipq9574_usb3_rx_tbl),
+	.pcs_tbl		= ipq9574_usb3_pcs_tbl,
+	.pcs_tbl_num		= ARRAY_SIZE(ipq9574_usb3_pcs_tbl),
+	.clk_list		= msm8996_phy_clk_l,
+	.num_clks		= ARRAY_SIZE(msm8996_phy_clk_l),
+	.reset_list		= qcm2290_usb3phy_reset_l,
+	.num_resets		= ARRAY_SIZE(qcm2290_usb3phy_reset_l),
+	.vreg_list		= qmp_phy_vreg_l,
+	.num_vregs		= ARRAY_SIZE(qmp_phy_vreg_l),
+	.regs			= qmp_v3_usb3phy_regs_layout,
+};
+
 static const struct qmp_phy_cfg msm8996_usb3phy_cfg = {
 	.lanes			= 1,
 
@@ -2589,6 +2701,9 @@ static const struct of_device_id qmp_usb_of_match_table[] = {
 		.compatible = "qcom,ipq8074-qmp-usb3-phy",
 		.data = &ipq8074_usb3phy_cfg,
 	}, {
+		.compatible = "qcom,ipq9574-qmp-usb3-phy",
+		.data = &ipq9574_usb3phy_cfg,
+	}, {
 		.compatible = "qcom,msm8996-qmp-usb3-phy",
 		.data = &msm8996_usb3phy_cfg,
 	}, {
-- 
2.7.4


-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

[PATCH v6 7/8] arm64: dts: qcom: ipq9574: Add USB related nodes

[Varadarajan Narayanan]

Add USB phy and controller related nodes

Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
---
 Changes in v6:
	- Introduce fixed regulators for the phy
	- Resolved all 'make dtbs_check' messages

 Changes in v5:
	- Fix additional comments
	- Edit nodes to match with qcom,sc8280xp-qmp-usb3-uni-phy.yaml
	- 'make dtbs_check' giving the following messages since
	  ipq9574 doesn't have power domains. Hope this is ok

		/local/mnt/workspace/varada/varda-linux/arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dtb: phy@7d000: 'power-domains' is a required property
        	From schema: /local/mnt/workspace/varada/varda-linux/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml
		/local/mnt/workspace/varada/varda-linux/arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dtb: usb@8a00000: 'power-domains' is a required property
        	From schema: /local/mnt/workspace/varada/varda-linux/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml

 Changes in v4:
	- Use newer bindings without subnodes
	- Fix coding style issues

 Changes in v3:
	- Insert the nodes at proper location

 Changes in v2:
	- Fixed issues flagged by Krzysztof
	- Fix issues reported by make dtbs_check
	- Remove NOC related clocks (to be added with proper
	  interconnect support)
---
 arch/arm64/boot/dts/qcom/ipq9574.dtsi | 120 ++++++++++++++++++++++++++++++++++
 1 file changed, 120 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/ipq9574.dtsi b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
index 43a3dbe..d7649ffd 100644
--- a/arch/arm64/boot/dts/qcom/ipq9574.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
@@ -150,6 +150,33 @@
 		method = "smc";
 	};
 
+	reg_usb_3p3: s3300 {
+		compatible = "regulator-fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-name = "usb-phy-vdd-dummy";
+	};
+
+	reg_usb_1p8: s1800 {
+		compatible = "regulator-fixed";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-name = "usb-phy-pll-dummy";
+	};
+
+	reg_usb_0p925: s0925 {
+		compatible = "regulator-fixed";
+		regulator-min-microvolt = <925000>;
+		regulator-max-microvolt = <925000>;
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-name = "usb-phy-dummy";
+	};
+
 	reserved-memory {
 		#address-cells = <2>;
 		#size-cells = <2>;
@@ -179,6 +206,52 @@
 		#size-cells = <1>;
 		ranges = <0 0 0 0xffffffff>;
 
+		usb_0_qusbphy: phy@7b000 {
+			compatible = "qcom,ipq9574-qusb2-phy";
+			reg = <0x0007b000 0x180>;
+			#phy-cells = <0>;
+
+			clocks = <&gcc GCC_USB0_PHY_CFG_AHB_CLK>,
+				 <&xo_board_clk>;
+			clock-names = "cfg_ahb",
+				      "ref";
+
+			vdd-supply = <&reg_usb_0p925>;
+			vdda-pll-supply = <&reg_usb_1p8>;
+			vdda-phy-dpdm-supply = <&reg_usb_3p3>;
+
+			resets = <&gcc GCC_QUSB2_0_PHY_BCR>;
+			status = "disabled";
+		};
+
+		usb_0_qmpphy: phy@7d000 {
+			compatible = "qcom,ipq9574-qmp-usb3-phy";
+			reg = <0x0007d000 0xa00>;
+			#phy-cells = <0>;
+
+			clocks = <&gcc GCC_USB0_AUX_CLK>,
+				 <&xo_board_clk>,
+				 <&gcc GCC_USB0_PHY_CFG_AHB_CLK>,
+				 <&gcc GCC_USB0_PIPE_CLK>;
+			clock-names = "aux",
+				      "ref",
+				      "com_aux",
+				      "pipe";
+
+			resets = <&gcc GCC_USB0_PHY_BCR>,
+				 <&gcc GCC_USB3PHY_0_PHY_BCR>;
+			reset-names = "phy",
+				      "phy_phy";
+
+			vdda-pll-supply = <&reg_usb_1p8>;
+			vdda-phy-supply = <&reg_usb_0p925>;
+
+			status = "disabled";
+
+			#clock-cells = <0>;
+			clock-output-names = "usb0_pipe_clk";
+		};
+
 		pcie0_phy: phy@84000 {
 			compatible = "qcom,ipq9574-qmp-gen3x1-pcie-phy";
 			reg = <0x00084000 0x1000>;
@@ -548,6 +621,53 @@
 			status = "disabled";
 		};
 
+		usb3: usb@8a00000 {
+			compatible = "qcom,ipq9574-dwc3", "qcom,dwc3";
+			reg = <0x08af8800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			clocks = <&gcc GCC_SNOC_USB_CLK>,
+				 <&gcc GCC_ANOC_USB_AXI_CLK>,
+				 <&gcc GCC_USB0_MASTER_CLK>,
+				 <&gcc GCC_USB0_SLEEP_CLK>,
+				 <&gcc GCC_USB0_MOCK_UTMI_CLK>;
+
+			clock-names = "cfg_noc",
+				      "iface",
+				      "core",
+				      "sleep",
+				      "mock_utmi";
+
+			assigned-clocks = <&gcc GCC_USB0_MASTER_CLK>,
+					  <&gcc GCC_USB0_MOCK_UTMI_CLK>;
+			assigned-clock-rates = <200000000>,
+					       <24000000>;
+
+			interrupts-extended = <&intc GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "pwr_event";
+
+			resets = <&gcc GCC_USB_BCR>;
+			status = "disabled";
+
+			dwc_0: usb@8a00000 {
+				compatible = "snps,dwc3";
+				reg = <0x8a00000 0xcd00>;
+				clocks = <&gcc GCC_USB0_MOCK_UTMI_CLK>;
+				clock-names = "ref";
+				interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+				phys = <&usb_0_qusbphy>, <&usb_0_qmpphy>;
+				phy-names = "usb2-phy", "usb3-phy";
+				tx-fifo-resize;
+				snps,is-utmi-l1-suspend;
+				snps,hird-threshold = /bits/ 8 <0x0>;
+				snps,dis_u2_susphy_quirk;
+				snps,dis_u3_susphy_quirk;
+				dr_mode = "host";
+			};
+		};
+
 		intc: interrupt-controller@b000000 {
 			compatible = "qcom,msm-qgic2";
 			reg = <0x0b000000 0x1000>,  /* GICD */
-- 
2.7.4


-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

[PATCH v6 8/8] arm64: dts: qcom: ipq9574: Enable USB

[Varadarajan Narayanan]

Turn on USB related nodes

Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
---
 Changes in v5:
	- Move "host" mode specification to board dts
	- Due to dependency with earlier patches board dts
	  filename changed ipq9574-al02-c7.dts -> ipq9574-rdp433.dts

 Changes in v2:
	- Fix node placement and coding style
	- "ok" -> "okay"
---
 arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts b/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts
index 859973b..92ff7ee 100644
--- a/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts
+++ b/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts
@@ -44,6 +44,10 @@
 	};
 };
 
+&dwc_0 {
+	dr_mode = "host";
+};
+
 &pcie1_phy {
 	status = "okay";
 };
@@ -107,6 +111,14 @@
 	clock-frequency = <32000>;
 };
 
+&usb_0_qmpphy {
+	status = "okay";
+};
+
+&usb_0_qusbphy {
+	status = "okay";
+};
+
 &tlmm {
 
 	pcie_1_pin: pcie-1-state {
@@ -173,6 +185,10 @@
 	};
 };
 
+&usb3 {
+	status = "okay";
+};
+
 &xo_board_clk {
 	clock-frequency = <24000000>;
 };
-- 
2.7.4


-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

Re: [PATCH v6 7/8] arm64: dts: qcom: ipq9574: Add USB related nodes

[Johan Hovold]

On Wed, Apr 05, 2023 at 02:26:42PM +0530, Varadarajan Narayanan wrote:
> Add USB phy and controller related nodes
> 
> Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
> ---
>  Changes in v6:
> 	- Introduce fixed regulators for the phy
> 	- Resolved all 'make dtbs_check' messages
 

> +		usb_0_qmpphy: phy@7d000 {
> +			compatible = "qcom,ipq9574-qmp-usb3-phy";
> +			reg = <0x0007d000 0xa00>;
> +			#phy-cells = <0>;
> +
> +			clocks = <&gcc GCC_USB0_AUX_CLK>,
> +				 <&xo_board_clk>,
> +				 <&gcc GCC_USB0_PHY_CFG_AHB_CLK>,
> +				 <&gcc GCC_USB0_PIPE_CLK>;
> +			clock-names = "aux",
> +				      "ref",
> +				      "com_aux",

Looks like you just ignored my comment that you need to rename this
clock (and update the binding). :(

	https://lore.kernel.org/lkml/ZCaznloORtzgioOP@hovoldconsulting.com/

> +				      "pipe";
> +
> +			resets = <&gcc GCC_USB0_PHY_BCR>,
> +				 <&gcc GCC_USB3PHY_0_PHY_BCR>;
> +			reset-names = "phy",
> +				      "phy_phy";
> +
> +			vdda-pll-supply = <&reg_usb_1p8>;
> +			vdda-phy-supply = <&reg_usb_0p925>;
> +
> +			status = "disabled";
> +
> +			#clock-cells = <0>;
> +			clock-output-names = "usb0_pipe_clk";
> +		};A

Johan

-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

Re: [PATCH v6 7/8] arm64: dts: qcom: ipq9574: Add USB related nodes

[Varadarajan Narayanan]

On Wed, Apr 05, 2023 at 11:15:41AM +0200, Johan Hovold wrote:
> On Wed, Apr 05, 2023 at 02:26:42PM +0530, Varadarajan Narayanan wrote:
> > Add USB phy and controller related nodes
> >
> > Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
> > ---
> >  Changes in v6:
> > 	- Introduce fixed regulators for the phy
> > 	- Resolved all 'make dtbs_check' messages
>
>
> > +		usb_0_qmpphy: phy@7d000 {
> > +			compatible = "qcom,ipq9574-qmp-usb3-phy";
> > +			reg = <0x0007d000 0xa00>;
> > +			#phy-cells = <0>;
> > +
> > +			clocks = <&gcc GCC_USB0_AUX_CLK>,
> > +				 <&xo_board_clk>,
> > +				 <&gcc GCC_USB0_PHY_CFG_AHB_CLK>,
> > +				 <&gcc GCC_USB0_PIPE_CLK>;
> > +			clock-names = "aux",
> > +				      "ref",
> > +				      "com_aux",
>
> Looks like you just ignored my comment that you need to rename this
> clock (and update the binding). :(
>
> 	https://lore.kernel.org/lkml/ZCaznloORtzgioOP@hovoldconsulting.com/

Sorry. My mistake. Will post a new patch.
Ignore V7. Missed the update in the binding.

Thanks
Varada
>
> > +				      "pipe";
> > +
> > +			resets = <&gcc GCC_USB0_PHY_BCR>,
> > +				 <&gcc GCC_USB3PHY_0_PHY_BCR>;
> > +			reset-names = "phy",
> > +				      "phy_phy";
> > +
> > +			vdda-pll-supply = <&reg_usb_1p8>;
> > +			vdda-phy-supply = <&reg_usb_0p925>;
> > +
> > +			status = "disabled";
> > +
> > +			#clock-cells = <0>;
> > +			clock-output-names = "usb0_pipe_clk";
> > +		};A
>
> Johan

-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy