Linux-PM Archive on lore.kernel.org
 help / color / Atom feed
From: Zhang Rui <rui.zhang@intel.com>
To: Pavel Machek <pavel@ucw.cz>,
	kernel list <linux-kernel@vger.kernel.org>,
	linux-acpi@vger.kernel.org, rjw@rjwysocki.net,
	viresh.kumar@linaro.org, linux-pm@vger.kernel.org,
	tglx@linutronix.de, mingo@redhat.com, bp@alien8.de,
	hpa@zytor.com, x86@kernel.org
Subject: Re: 5.2-rc2: low framerate in flightgear, cpu not running at full speed, thermal related?
Date: Sun, 09 Jun 2019 22:13:00 +0800
Message-ID: <1560089580.2363.10.camel@intel.com> (raw)
In-Reply-To: <20190609121212.GA4520@amd>

On 日, 2019-06-09 at 14:12 +0200, Pavel Machek wrote:
> Hi!
> 
> > 
> > > 
> > > When I start flightgear, I get framerates around 20 fps and cpu
> > > at
> > > 3GHz:
> > > 
> > > pavel@duo:~/bt$ cat /proc/cpuinfo  | grep MHz
> > > cpu MHz		    : 3027.471
> > > cpu MHz		      : 2981.863
> > > cpu MHz		      	: 2958.352
> > > cpu MHz			  : 2864.001
> > > pavel@duo:~/bt$
> > > 
> > > (Ok, fgfs is really only running at single core, so why do both
> > > cores
> > > run at 3GHz?)
> > > 
> > > But temperatures get quite high:
> > > 
> > > pavel@duo:~/bt$ sensors
> > > thinkpad-isa-0000
> > > Adapter: ISA adapter
> > > fan1:        4485 RPM
> > > 
> > > coretemp-isa-0000
> > > Adapter: ISA adapter
> > > Package id 0:  +98.0°C  (high = +86.0°C, crit = +100.0°C)
> > > Core 0:        +98.0°C  (high = +86.0°C, crit = +100.0°C)
> > > Core 1:        +91.0°C  (high = +86.0°C, crit = +100.0°C)
> > > 
> > > And soon cpu goes to 1.5GHz range, with framerates going down to
> > > 12fps. That's a bit low.
> > > 
> > > Room temperature is 26Celsius.
> > > 
> > > The CPU is Intel(R) Core(TM) i5-2520M CPU @ 2.50GHz . I guess it
> > > means
> > > it should be able to sustain both cores running at 2.5GHz?
> > > 
> > > Any ideas? Were there any recent changes in that area?
> > I tried kernel compile. It keeps both cores at 3GHz, temperature
> > goes
> > up over 95C, and then cpus start going down to 2.3GHz... and then
> > down
> > to 2GHz... and down to 1.9GHz.
> > 
> > watch bash -c 'sensors;  cat /proc/cpuinfo | grep MHz'
> Situation is very different with v4.6 distro based kernel.
> 
> CPU MHz is only getting values round to 100MHz. It does not go above
> 2.5GHz, but it does not go below 2.5GHz under the load, either.
> 
> ACPI adapter appears in sensors output.

what temperature does coretemp report?
can you please provide the sensors output in 4.6 during kernel
compiling?

can you attach the output of "grep . /sys/class/thermal/thermal*/*"
when the temperature goes high in both kernels?

thanks,
rui
> 
> Now I tried going to 5.2-rc4. It behaves the same as 5.2-rc2. Goes up
> to 3GHz briefly but then down to 2.0GHz and below under load.
> 
> Ideas welcome.
> 
> Best regards,
> 									
> Pavel

  parent reply index

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-06-09 11:17 Pavel Machek
2019-06-09 11:23 ` Pavel Machek
2019-06-09 12:12   ` Pavel Machek
2019-06-09 13:55     ` Daniel Lezcano
2019-06-09 14:13     ` Zhang Rui [this message]
2019-06-11 10:12       ` Pavel Machek
2019-06-11 10:15         ` Viresh Kumar
2019-06-12  2:37 ` Doug Smythies
2019-06-12 21:44   ` Rafael J. Wysocki
2019-06-12 23:39     ` Doug Smythies
2019-06-13  8:11       ` Pavel Machek
2019-06-13  9:00         ` Rafael J. Wysocki
2019-06-13  8:52       ` Rafael J. Wysocki
2019-06-18  8:20         ` Doug Smythies
2019-06-18  8:34           ` Pavel Machek

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1560089580.2363.10.camel@intel.com \
    --to=rui.zhang@intel.com \
    --cc=bp@alien8.de \
    --cc=hpa@zytor.com \
    --cc=linux-acpi@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=mingo@redhat.com \
    --cc=pavel@ucw.cz \
    --cc=rjw@rjwysocki.net \
    --cc=tglx@linutronix.de \
    --cc=viresh.kumar@linaro.org \
    --cc=x86@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-PM Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-pm/0 linux-pm/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-pm linux-pm/ https://lore.kernel.org/linux-pm \
		linux-pm@vger.kernel.org linux-pm@archiver.kernel.org
	public-inbox-index linux-pm

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-pm


AGPL code for this site: git clone https://public-inbox.org/ public-inbox