* Re: [GIT PATCH] ACPI patches for 2.6.25-rc0
[not found] <200802070450.09098.lenb@kernel.org>
@ 2008-02-09 6:34 ` Ingo Molnar
[not found] ` <20080209063439.GA19995@elte.hu>
1 sibling, 0 replies; 6+ messages in thread
From: Ingo Molnar @ 2008-02-09 6:34 UTC (permalink / raw)
To: Len Brown
Cc: linux-acpi, Andrew Morton, Linus Torvalds, linux-kernel, linux-pm
[-- Attachment #1: Type: text/plain, Size: 631 bytes --]
* Len Brown <lenb@kernel.org> wrote:
> Hi Linus,
>
> please pull from:
>
> git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6.git release
one of these caused a build failure in x86.git overnight randconfig
testing:
drivers/built-in.o: In function `acpi_fan_remove':
fan.c:(.text+0x361d5): undefined reference to `thermal_cooling_device_unregister'
drivers/built-in.o: In function `acpi_fan_add':
fan.c:(.text+0x3625e): undefined reference to `thermal_cooling_device_register'
i suspect it might be this one:
> ACPI: register ACPI thermal zone as generic thermal zone devices
config attached.
Ingo
[-- Attachment #2: config --]
[-- Type: text/plain, Size: 50545 bytes --]
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.24
# Sat Feb 9 07:15:30 2008
#
# CONFIG_64BIT is not set
CONFIG_X86_32=y
# CONFIG_X86_64 is not set
CONFIG_X86=y
# CONFIG_GENERIC_LOCKBREAK is not set
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_SEMAPHORE_SLEEPERS=y
CONFIG_FAST_CMPXCHG_LOCAL=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
CONFIG_QUICKLIST=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_HWEIGHT=y
# CONFIG_GENERIC_GPIO is not set
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_DMI=y
# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_GENERIC_CALIBRATE_DELAY=y
# CONFIG_GENERIC_TIME_VSYSCALL is not set
CONFIG_ARCH_HAS_CPU_RELAX=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_ZONE_DMA32 is not set
CONFIG_ARCH_POPULATES_NODE_MAP=y
# CONFIG_AUDIT_ARCH is not set
CONFIG_ARCH_SUPPORTS_AOUT=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_X86_SMP=y
CONFIG_X86_32_SMP=y
CONFIG_X86_HT=y
CONFIG_X86_BIOS_REBOOT=y
CONFIG_X86_TRAMPOLINE=y
CONFIG_KTIME_SCALAR=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
# CONFIG_SYSVIPC is not set
CONFIG_POSIX_MQUEUE=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_TASKSTATS=y
# CONFIG_TASK_DELAY_ACCT is not set
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=20
CONFIG_CGROUPS=y
# CONFIG_CGROUP_DEBUG is not set
# CONFIG_CGROUP_NS is not set
CONFIG_CPUSETS=y
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_FAIR_USER_SCHED=y
# CONFIG_FAIR_CGROUP_SCHED is not set
# CONFIG_CGROUP_CPUACCT is not set
# CONFIG_RESOURCE_COUNTERS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_PROC_PID_CPUSET=y
CONFIG_RELAY=y
CONFIG_NAMESPACES=y
# CONFIG_UTS_NS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_EXTRA_PASS=y
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
CONFIG_MARKERS=y
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_KPROBES=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_MODULES is not set
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
CONFIG_BLK_DEV_IO_TRACE=y
# CONFIG_LSF is not set
CONFIG_BLK_DEV_BSG=y
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_AS is not set
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
CONFIG_DEFAULT_NOOP=y
CONFIG_DEFAULT_IOSCHED="noop"
CONFIG_CLASSIC_RCU=y
# CONFIG_PREEMPT_RCU is not set
#
# Processor type and features
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
# CONFIG_HIGH_RES_TIMERS is not set
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_SMP=y
# CONFIG_X86_PC is not set
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
CONFIG_X86_BIGSMP=y
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_X86_RDC321X is not set
# CONFIG_X86_VSMP is not set
# CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER is not set
# CONFIG_PARAVIRT_GUEST is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
CONFIG_MCRUSOE=y
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_GENERIC_CPU is not set
CONFIG_X86_GENERIC=y
CONFIG_X86_CMPXCHG=y
CONFIG_X86_L1_CACHE_SHIFT=7
CONFIG_X86_XADD=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_TSC=y
CONFIG_X86_MINIMUM_CPU_FAMILY=4
CONFIG_X86_DEBUGCTLMSR=y
# CONFIG_HPET_TIMER is not set
# CONFIG_IOMMU_HELPER is not set
CONFIG_NR_CPUS=32
CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
# CONFIG_RCU_TRACE is not set
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
# CONFIG_X86_MCE is not set
CONFIG_VM86=y
# CONFIG_TOSHIBA is not set
CONFIG_I8K=y
# CONFIG_X86_REBOOTFIXUPS is not set
CONFIG_MICROCODE=y
CONFIG_MICROCODE_OLD_INTERFACE=y
# CONFIG_X86_MSR is not set
CONFIG_X86_CPUID=y
CONFIG_NOHIGHMEM=y
# CONFIG_HIGHMEM4G is not set
# CONFIG_HIGHMEM64G is not set
CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_X86_PAE=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_RESOURCES_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_NR_QUICK=1
CONFIG_VIRT_TO_BUS=y
# CONFIG_MATH_EMULATION is not set
# CONFIG_MTRR is not set
# CONFIG_EFI is not set
# CONFIG_IRQBALANCE is not set
CONFIG_SECCOMP=y
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
# CONFIG_SCHED_HRTICK is not set
# CONFIG_KEXEC is not set
CONFIG_PHYSICAL_START=0x100000
# CONFIG_RELOCATABLE is not set
CONFIG_PHYSICAL_ALIGN=0x100000
CONFIG_HOTPLUG_CPU=y
# CONFIG_COMPAT_VDSO is not set
#
# Power management options
#
CONFIG_PM=y
# CONFIG_PM_LEGACY is not set
# CONFIG_PM_DEBUG is not set
CONFIG_PM_SLEEP_SMP=y
CONFIG_PM_SLEEP=y
# CONFIG_SUSPEND is not set
CONFIG_HIBERNATION=y
CONFIG_PM_STD_PARTITION=""
CONFIG_ACPI=y
CONFIG_ACPI_SLEEP=y
# CONFIG_ACPI_PROCFS is not set
# CONFIG_ACPI_PROCFS_POWER is not set
# CONFIG_ACPI_SYSFS_POWER is not set
CONFIG_ACPI_PROC_EVENT=y
# CONFIG_ACPI_AC is not set
# CONFIG_ACPI_BATTERY is not set
# CONFIG_ACPI_BUTTON is not set
CONFIG_ACPI_FAN=y
CONFIG_ACPI_DOCK=y
CONFIG_ACPI_BAY=y
# CONFIG_ACPI_PROCESSOR is not set
# CONFIG_ACPI_WMI is not set
# CONFIG_ACPI_ASUS is not set
CONFIG_ACPI_TOSHIBA=y
# CONFIG_ACPI_CUSTOM_DSDT_INITRD is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
CONFIG_ACPI_DEBUG=y
# CONFIG_ACPI_DEBUG_FUNC_TRACE is not set
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=y
# CONFIG_ACPI_SBS is not set
# CONFIG_APM is not set
#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
# CONFIG_CPU_IDLE is not set
#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_GOBIOS=y
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
# CONFIG_PCI_GOANY is not set
CONFIG_PCI_BIOS=y
CONFIG_PCI_DOMAINS=y
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
CONFIG_HT_IRQ=y
CONFIG_ISA_DMA_API=y
CONFIG_ISA=y
CONFIG_EISA=y
# CONFIG_EISA_PCI_EISA is not set
CONFIG_EISA_NAMES=y
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set
# CONFIG_PCCARD is not set
CONFIG_HOTPLUG_PCI=y
CONFIG_HOTPLUG_PCI_FAKE=y
CONFIG_HOTPLUG_PCI_ACPI=y
CONFIG_HOTPLUG_PCI_ACPI_IBM=y
CONFIG_HOTPLUG_PCI_CPCI=y
# CONFIG_HOTPLUG_PCI_CPCI_ZT5550 is not set
CONFIG_HOTPLUG_PCI_SHPC=y
#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_AOUT=y
# CONFIG_BINFMT_MISC is not set
#
# Networking
#
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=y
CONFIG_XFRM_SUB_POLICY=y
CONFIG_XFRM_MIGRATE=y
# CONFIG_XFRM_STATISTICS is not set
CONFIG_NET_KEY=y
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
# CONFIG_ASK_IP_FIB_HASH is not set
CONFIG_IP_FIB_TRIE=y
# CONFIG_IP_FIB_HASH is not set
CONFIG_IP_FIB_TRIE_STATS=y
# CONFIG_IP_MULTIPLE_TABLES is not set
# CONFIG_IP_ROUTE_MULTIPATH is not set
# CONFIG_IP_ROUTE_VERBOSE is not set
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
CONFIG_IP_MROUTE=y
# CONFIG_IP_PIMSM_V1 is not set
# CONFIG_IP_PIMSM_V2 is not set
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=y
CONFIG_INET_ESP=y
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
CONFIG_INET_TUNNEL=y
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
CONFIG_TCP_CONG_ADVANCED=y
# CONFIG_TCP_CONG_BIC is not set
CONFIG_TCP_CONG_CUBIC=y
# CONFIG_TCP_CONG_WESTWOOD is not set
CONFIG_TCP_CONG_HTCP=y
# CONFIG_TCP_CONG_HSTCP is not set
# CONFIG_TCP_CONG_HYBLA is not set
CONFIG_TCP_CONG_VEGAS=y
CONFIG_TCP_CONG_SCALABLE=y
# CONFIG_TCP_CONG_LP is not set
CONFIG_TCP_CONG_VENO=y
CONFIG_TCP_CONG_YEAH=y
CONFIG_TCP_CONG_ILLINOIS=y
# CONFIG_DEFAULT_BIC is not set
# CONFIG_DEFAULT_CUBIC is not set
# CONFIG_DEFAULT_HTCP is not set
# CONFIG_DEFAULT_VEGAS is not set
# CONFIG_DEFAULT_WESTWOOD is not set
CONFIG_DEFAULT_RENO=y
CONFIG_DEFAULT_TCP_CONG="reno"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IP_VS is not set
CONFIG_IPV6=y
# CONFIG_IPV6_PRIVACY is not set
CONFIG_IPV6_ROUTER_PREF=y
# CONFIG_IPV6_ROUTE_INFO is not set
CONFIG_IPV6_OPTIMISTIC_DAD=y
CONFIG_INET6_AH=y
# CONFIG_INET6_ESP is not set
# CONFIG_INET6_IPCOMP is not set
# CONFIG_IPV6_MIP6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
CONFIG_INET6_TUNNEL=y
CONFIG_INET6_XFRM_MODE_TRANSPORT=y
CONFIG_INET6_XFRM_MODE_TUNNEL=y
# CONFIG_INET6_XFRM_MODE_BEET is not set
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=y
CONFIG_IPV6_SIT=y
CONFIG_IPV6_TUNNEL=y
# CONFIG_IPV6_MULTIPLE_TABLES is not set
CONFIG_NETLABEL=y
CONFIG_NETWORK_SECMARK=y
CONFIG_NETFILTER=y
CONFIG_NETFILTER_DEBUG=y
CONFIG_NETFILTER_ADVANCED=y
#
# Core Netfilter Configuration
#
# CONFIG_NETFILTER_NETLINK_QUEUE is not set
# CONFIG_NETFILTER_NETLINK_LOG is not set
# CONFIG_NF_CONNTRACK is not set
CONFIG_NETFILTER_XTABLES=y
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=y
CONFIG_NETFILTER_XT_TARGET_MARK=y
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=y
# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
CONFIG_NETFILTER_XT_TARGET_SECMARK=y
# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
CONFIG_NETFILTER_XT_MATCH_COMMENT=y
CONFIG_NETFILTER_XT_MATCH_DCCP=y
CONFIG_NETFILTER_XT_MATCH_DSCP=y
# CONFIG_NETFILTER_XT_MATCH_ESP is not set
CONFIG_NETFILTER_XT_MATCH_IPRANGE=y
# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
CONFIG_NETFILTER_XT_MATCH_LIMIT=y
# CONFIG_NETFILTER_XT_MATCH_MAC is not set
# CONFIG_NETFILTER_XT_MATCH_MARK is not set
CONFIG_NETFILTER_XT_MATCH_OWNER=y
# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=y
# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
CONFIG_NETFILTER_XT_MATCH_REALM=y
CONFIG_NETFILTER_XT_MATCH_SCTP=y
# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
# CONFIG_NETFILTER_XT_MATCH_STRING is not set
CONFIG_NETFILTER_XT_MATCH_TCPMSS=y
# CONFIG_NETFILTER_XT_MATCH_TIME is not set
CONFIG_NETFILTER_XT_MATCH_U32=y
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=y
#
# IP: Netfilter Configuration
#
CONFIG_IP_NF_QUEUE=y
CONFIG_IP_NF_IPTABLES=y
# CONFIG_IP_NF_MATCH_RECENT is not set
CONFIG_IP_NF_MATCH_ECN=y
# CONFIG_IP_NF_MATCH_AH is not set
CONFIG_IP_NF_MATCH_TTL=y
CONFIG_IP_NF_MATCH_ADDRTYPE=y
# CONFIG_IP_NF_FILTER is not set
# CONFIG_IP_NF_TARGET_LOG is not set
# CONFIG_IP_NF_TARGET_ULOG is not set
# CONFIG_IP_NF_MANGLE is not set
# CONFIG_IP_NF_RAW is not set
# CONFIG_IP_NF_ARPTABLES is not set
#
# IPv6: Netfilter Configuration
#
CONFIG_IP6_NF_QUEUE=y
# CONFIG_IP6_NF_IPTABLES is not set
# CONFIG_IP_DCCP is not set
CONFIG_IP_SCTP=y
CONFIG_SCTP_DBG_MSG=y
# CONFIG_SCTP_DBG_OBJCNT is not set
CONFIG_SCTP_HMAC_NONE=y
# CONFIG_SCTP_HMAC_SHA1 is not set
# CONFIG_SCTP_HMAC_MD5 is not set
# CONFIG_TIPC is not set
CONFIG_ATM=y
# CONFIG_ATM_CLIP is not set
# CONFIG_ATM_LANE is not set
# CONFIG_ATM_BR2684 is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
CONFIG_LLC=y
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
CONFIG_ATALK=y
CONFIG_DEV_APPLETALK=y
CONFIG_LTPC=y
# CONFIG_COPS is not set
CONFIG_IPDDP=y
CONFIG_IPDDP_ENCAP=y
CONFIG_IPDDP_DECAP=y
# CONFIG_X25 is not set
CONFIG_LAPB=y
CONFIG_ECONET=y
CONFIG_ECONET_AUNUDP=y
# CONFIG_ECONET_NATIVE is not set
CONFIG_WAN_ROUTER=y
CONFIG_NET_SCHED=y
#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=y
CONFIG_NET_SCH_HTB=y
# CONFIG_NET_SCH_HFSC is not set
# CONFIG_NET_SCH_ATM is not set
CONFIG_NET_SCH_PRIO=y
CONFIG_NET_SCH_RR=y
# CONFIG_NET_SCH_RED is not set
CONFIG_NET_SCH_SFQ=y
# CONFIG_NET_SCH_TEQL is not set
CONFIG_NET_SCH_TBF=y
CONFIG_NET_SCH_GRED=y
CONFIG_NET_SCH_DSMARK=y
CONFIG_NET_SCH_NETEM=y
#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=y
CONFIG_NET_CLS_TCINDEX=y
CONFIG_NET_CLS_ROUTE4=y
CONFIG_NET_CLS_ROUTE=y
# CONFIG_NET_CLS_FW is not set
# CONFIG_NET_CLS_U32 is not set
# CONFIG_NET_CLS_RSVP is not set
CONFIG_NET_CLS_RSVP6=y
# CONFIG_NET_CLS_FLOW is not set
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
CONFIG_NET_EMATCH_CMP=y
CONFIG_NET_EMATCH_NBYTE=y
# CONFIG_NET_EMATCH_U32 is not set
CONFIG_NET_EMATCH_META=y
CONFIG_NET_EMATCH_TEXT=y
# CONFIG_NET_CLS_ACT is not set
CONFIG_NET_SCH_FIFO=y
#
# Network testing
#
CONFIG_NET_PKTGEN=y
# CONFIG_HAMRADIO is not set
CONFIG_CAN=y
# CONFIG_CAN_RAW is not set
CONFIG_CAN_BCM=y
#
# CAN Device Drivers
#
# CONFIG_CAN_VCAN is not set
CONFIG_CAN_DEBUG_DEVICES=y
# CONFIG_IRDA is not set
CONFIG_BT=y
# CONFIG_BT_L2CAP is not set
# CONFIG_BT_SCO is not set
#
# Bluetooth device drivers
#
CONFIG_BT_HCIUSB=y
CONFIG_BT_HCIUSB_SCO=y
# CONFIG_BT_HCIUART is not set
CONFIG_BT_HCIBCM203X=y
# CONFIG_BT_HCIBPA10X is not set
# CONFIG_BT_HCIBFUSB is not set
# CONFIG_BT_HCIVHCI is not set
# CONFIG_AF_RXRPC is not set
#
# Wireless
#
CONFIG_CFG80211=y
# CONFIG_NL80211 is not set
CONFIG_WIRELESS_EXT=y
# CONFIG_MAC80211 is not set
CONFIG_IEEE80211=y
CONFIG_IEEE80211_DEBUG=y
# CONFIG_IEEE80211_CRYPT_WEP is not set
# CONFIG_IEEE80211_CRYPT_CCMP is not set
# CONFIG_IEEE80211_CRYPT_TKIP is not set
# CONFIG_IEEE80211_SOFTMAC is not set
CONFIG_RFKILL=y
CONFIG_RFKILL_INPUT=y
CONFIG_NET_9P=y
# CONFIG_NET_9P_FD is not set
CONFIG_NET_9P_VIRTIO=y
# CONFIG_NET_9P_DEBUG is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_DEBUG_DRIVER is not set
CONFIG_DEBUG_DEVRES=y
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
# CONFIG_MTD is not set
# CONFIG_PARPORT is not set
CONFIG_PNP=y
# CONFIG_PNP_DEBUG is not set
#
# Protocols
#
# CONFIG_ISAPNP is not set
# CONFIG_PNPBIOS is not set
CONFIG_PNPACPI=y
# CONFIG_BLK_DEV is not set
# CONFIG_MISC_DEVICES is not set
# CONFIG_IDE is not set
#
# SCSI device support
#
CONFIG_RAID_ATTRS=y
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_TGT=y
CONFIG_SCSI_NETLINK=y
# CONFIG_SCSI_PROC_FS is not set
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=y
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
# CONFIG_CHR_DEV_SG is not set
CONFIG_CHR_DEV_SCH=y
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SCAN_ASYNC=y
#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
CONFIG_SCSI_FC_ATTRS=y
# CONFIG_SCSI_FC_TGT_ATTRS is not set
CONFIG_SCSI_ISCSI_ATTRS=y
CONFIG_SCSI_SAS_ATTRS=y
CONFIG_SCSI_SAS_LIBSAS=y
CONFIG_SCSI_SAS_ATA=y
# CONFIG_SCSI_SAS_HOST_SMP is not set
CONFIG_SCSI_SAS_LIBSAS_DEBUG=y
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=y
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
CONFIG_SCSI_7000FASST=y
# CONFIG_SCSI_ACARD is not set
CONFIG_SCSI_AHA152X=y
CONFIG_SCSI_AHA1542=y
# CONFIG_SCSI_AHA1740 is not set
# CONFIG_SCSI_AACRAID is not set
CONFIG_SCSI_AIC7XXX=y
CONFIG_AIC7XXX_CMDS_PER_DEVICE=32
CONFIG_AIC7XXX_RESET_DELAY_MS=5000
CONFIG_AIC7XXX_DEBUG_ENABLE=y
CONFIG_AIC7XXX_DEBUG_MASK=0
CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
CONFIG_SCSI_AIC7XXX_OLD=y
CONFIG_SCSI_AIC79XX=y
CONFIG_AIC79XX_CMDS_PER_DEVICE=32
CONFIG_AIC79XX_RESET_DELAY_MS=5000
CONFIG_AIC79XX_DEBUG_ENABLE=y
CONFIG_AIC79XX_DEBUG_MASK=0
# CONFIG_AIC79XX_REG_PRETTY_PRINT is not set
# CONFIG_SCSI_AIC94XX is not set
CONFIG_SCSI_DPT_I2O=y
CONFIG_SCSI_ADVANSYS=y
# CONFIG_SCSI_IN2000 is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
CONFIG_SCSI_HPTIOP=y
CONFIG_SCSI_BUSLOGIC=y
CONFIG_SCSI_OMIT_FLASHPOINT=y
CONFIG_SCSI_DMX3191D=y
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_EATA is not set
CONFIG_SCSI_FUTURE_DOMAIN=y
# CONFIG_SCSI_GENERIC_NCR5380 is not set
CONFIG_SCSI_GENERIC_NCR5380_MMIO=y
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
CONFIG_SCSI_INIA100=y
CONFIG_SCSI_NCR53C406A=y
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
CONFIG_SCSI_IPR=y
CONFIG_SCSI_IPR_TRACE=y
# CONFIG_SCSI_IPR_DUMP is not set
# CONFIG_SCSI_PAS16 is not set
CONFIG_SCSI_QLOGIC_FAS=y
CONFIG_SCSI_QLOGIC_1280=y
CONFIG_SCSI_QLA_FC=y
CONFIG_SCSI_QLA_ISCSI=y
CONFIG_SCSI_LPFC=y
CONFIG_SCSI_SIM710=y
# CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_DC395x is not set
CONFIG_SCSI_DC390T=y
# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_U14_34F is not set
# CONFIG_SCSI_ULTRASTOR is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_ACPI=y
CONFIG_SATA_AHCI=y
CONFIG_SATA_SVW=y
CONFIG_ATA_PIIX=y
# CONFIG_SATA_MV is not set
CONFIG_SATA_NV=y
CONFIG_PDC_ADMA=y
CONFIG_SATA_QSTOR=y
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIL24 is not set
# CONFIG_SATA_SIS is not set
CONFIG_SATA_ULI=y
CONFIG_SATA_VIA=y
# CONFIG_SATA_VITESSE is not set
CONFIG_SATA_INIC162X=y
CONFIG_PATA_ACPI=y
# CONFIG_PATA_ALI is not set
CONFIG_PATA_AMD=y
CONFIG_PATA_ARTOP=y
CONFIG_PATA_ATIIXP=y
CONFIG_PATA_CMD640_PCI=y
CONFIG_PATA_CMD64X=y
CONFIG_PATA_CS5520=y
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CS5535 is not set
# CONFIG_PATA_CS5536 is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
CONFIG_ATA_GENERIC=y
CONFIG_PATA_HPT366=y
# CONFIG_PATA_HPT37X is not set
CONFIG_PATA_HPT3X2N=y
# CONFIG_PATA_HPT3X3 is not set
CONFIG_PATA_IT821X=y
CONFIG_PATA_IT8213=y
# CONFIG_PATA_JMICRON is not set
CONFIG_PATA_LEGACY=y
# CONFIG_PATA_TRIFLEX is not set
CONFIG_PATA_MARVELL=y
CONFIG_PATA_MPIIX=y
CONFIG_PATA_OLDPIIX=y
CONFIG_PATA_NETCELL=y
# CONFIG_PATA_NINJA32 is not set
CONFIG_PATA_NS87410=y
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
CONFIG_PATA_OPTIDMA=y
CONFIG_PATA_PDC_OLD=y
# CONFIG_PATA_QDI is not set
CONFIG_PATA_RADISYS=y
CONFIG_PATA_RZ1000=y
# CONFIG_PATA_SC1200 is not set
CONFIG_PATA_SERVERWORKS=y
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
CONFIG_PATA_SIS=y
CONFIG_PATA_VIA=y
CONFIG_PATA_WINBOND=y
CONFIG_PATA_WINBOND_VLB=y
# CONFIG_MD is not set
CONFIG_FUSION=y
# CONFIG_FUSION_SPI is not set
CONFIG_FUSION_FC=y
# CONFIG_FUSION_SAS is not set
CONFIG_FUSION_MAX_SGE=128
CONFIG_FUSION_CTL=y
# CONFIG_FUSION_LAN is not set
# CONFIG_FUSION_LOGGING is not set
#
# IEEE 1394 (FireWire) support
#
# CONFIG_FIREWIRE is not set
CONFIG_IEEE1394=y
#
# Subsystem Options
#
CONFIG_IEEE1394_VERBOSEDEBUG=y
#
# Controllers
#
CONFIG_IEEE1394_PCILYNX=y
# CONFIG_IEEE1394_OHCI1394 is not set
#
# Protocols
#
CONFIG_IEEE1394_SBP2=y
# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set
# CONFIG_IEEE1394_ETH1394_ROM_ENTRY is not set
# CONFIG_IEEE1394_ETH1394 is not set
# CONFIG_IEEE1394_RAWIO is not set
CONFIG_I2O=y
CONFIG_I2O_LCT_NOTIFY_ON_CHANGES=y
# CONFIG_I2O_EXT_ADAPTEC is not set
CONFIG_I2O_CONFIG=y
CONFIG_I2O_CONFIG_OLD_IOCTL=y
CONFIG_I2O_BUS=y
# CONFIG_I2O_BLOCK is not set
# CONFIG_I2O_SCSI is not set
# CONFIG_I2O_PROC is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
# CONFIG_NETDEVICES_MULTIQUEUE is not set
CONFIG_DUMMY=y
# CONFIG_BONDING is not set
CONFIG_MACVLAN=y
# CONFIG_EQUALIZER is not set
CONFIG_TUN=y
# CONFIG_VETH is not set
# CONFIG_NET_SB1000 is not set
# CONFIG_ARCNET is not set
# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
CONFIG_HAPPYMEAL=y
# CONFIG_SUNGEM is not set
CONFIG_CASSINI=y
# CONFIG_NET_VENDOR_3COM is not set
CONFIG_LANCE=y
CONFIG_NET_VENDOR_SMC=y
# CONFIG_WD80x3 is not set
# CONFIG_ULTRA is not set
# CONFIG_ULTRA32 is not set
CONFIG_SMC9194=y
# CONFIG_NET_VENDOR_RACAL is not set
CONFIG_NET_TULIP=y
# CONFIG_DE2104X is not set
# CONFIG_TULIP is not set
CONFIG_DE4X5=y
CONFIG_WINBOND_840=y
# CONFIG_DM9102 is not set
# CONFIG_ULI526X is not set
CONFIG_AT1700=y
CONFIG_DEPCA=y
CONFIG_HP100=y
# CONFIG_NET_ISA is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_AC3200 is not set
# CONFIG_APRICOT is not set
CONFIG_B44=y
CONFIG_B44_PCI_AUTOSELECT=y
CONFIG_B44_PCICORE_AUTOSELECT=y
CONFIG_B44_PCI=y
CONFIG_FORCEDETH=y
CONFIG_FORCEDETH_NAPI=y
# CONFIG_CS89x0 is not set
CONFIG_EEPRO100=y
CONFIG_E100=y
# CONFIG_LNE390 is not set
# CONFIG_FEALNX is not set
CONFIG_NATSEMI=y
CONFIG_NE2K_PCI=y
# CONFIG_NE3210 is not set
# CONFIG_ES3210 is not set
CONFIG_8139CP=y
CONFIG_8139TOO=y
# CONFIG_8139TOO_PIO is not set
# CONFIG_8139TOO_TUNE_TWISTER is not set
CONFIG_8139TOO_8129=y
# CONFIG_8139_OLD_RX_RESET is not set
# CONFIG_R6040 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
CONFIG_SUNDANCE=y
# CONFIG_SUNDANCE_MMIO is not set
CONFIG_TLAN=y
CONFIG_VIA_RHINE=y
CONFIG_VIA_RHINE_MMIO=y
# CONFIG_VIA_RHINE_NAPI is not set
# CONFIG_SC92031 is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
CONFIG_E1000=y
CONFIG_E1000_NAPI=y
# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
CONFIG_E1000E=y
CONFIG_E1000E_ENABLED=y
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
CONFIG_NS83820=y
CONFIG_HAMACHI=y
CONFIG_YELLOWFIN=y
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
CONFIG_VIA_VELOCITY=y
CONFIG_TIGON3=y
CONFIG_BNX2=y
CONFIG_QLA3XXX=y
CONFIG_ATL1=y
CONFIG_NETDEV_10000=y
CONFIG_CHELSIO_T1=y
CONFIG_CHELSIO_T1_1G=y
CONFIG_CHELSIO_T1_NAPI=y
# CONFIG_CHELSIO_T3 is not set
CONFIG_IXGBE=y
# CONFIG_IXGB is not set
CONFIG_S2IO=y
CONFIG_S2IO_NAPI=y
# CONFIG_MYRI10GE is not set
CONFIG_NETXEN_NIC=y
CONFIG_NIU=y
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
CONFIG_BNX2X=y
# CONFIG_TR is not set
#
# Wireless LAN
#
# CONFIG_WLAN_PRE80211 is not set
CONFIG_WLAN_80211=y
CONFIG_IPW2100=y
CONFIG_IPW2100_MONITOR=y
CONFIG_IPW2100_DEBUG=y
CONFIG_IPW2200=y
# CONFIG_IPW2200_MONITOR is not set
CONFIG_IPW2200_QOS=y
# CONFIG_IPW2200_DEBUG is not set
# CONFIG_LIBERTAS is not set
CONFIG_AIRO=y
CONFIG_HERMES=y
CONFIG_PLX_HERMES=y
CONFIG_TMD_HERMES=y
CONFIG_NORTEL_HERMES=y
# CONFIG_PCI_HERMES is not set
CONFIG_ATMEL=y
CONFIG_PCI_ATMEL=y
# CONFIG_PRISM54 is not set
# CONFIG_USB_ZD1201 is not set
CONFIG_USB_NET_RNDIS_WLAN=y
# CONFIG_HOSTAP is not set
#
# USB Network Adapters
#
CONFIG_USB_CATC=y
# CONFIG_USB_KAWETH is not set
CONFIG_USB_PEGASUS=y
CONFIG_USB_RTL8150=y
CONFIG_USB_USBNET=y
CONFIG_USB_NET_AX8817X=y
CONFIG_USB_NET_CDCETHER=y
# CONFIG_USB_NET_DM9601 is not set
# CONFIG_USB_NET_GL620A is not set
CONFIG_USB_NET_NET1080=y
CONFIG_USB_NET_PLUSB=y
# CONFIG_USB_NET_MCS7830 is not set
CONFIG_USB_NET_RNDIS_HOST=y
CONFIG_USB_NET_CDC_SUBSET=y
CONFIG_USB_ALI_M5632=y
# CONFIG_USB_AN2720 is not set
CONFIG_USB_BELKIN=y
CONFIG_USB_ARMLINUX=y
# CONFIG_USB_EPSON2888 is not set
CONFIG_USB_KC2190=y
# CONFIG_USB_NET_ZAURUS is not set
# CONFIG_WAN is not set
CONFIG_ATM_DRIVERS=y
# CONFIG_ATM_DUMMY is not set
# CONFIG_ATM_TCP is not set
CONFIG_ATM_LANAI=y
# CONFIG_ATM_ENI is not set
# CONFIG_ATM_FIRESTREAM is not set
# CONFIG_ATM_ZATM is not set
# CONFIG_ATM_NICSTAR is not set
CONFIG_ATM_IDT77252=y
# CONFIG_ATM_IDT77252_DEBUG is not set
# CONFIG_ATM_IDT77252_RCV_ALL is not set
CONFIG_ATM_IDT77252_USE_SUNI=y
CONFIG_ATM_AMBASSADOR=y
# CONFIG_ATM_AMBASSADOR_DEBUG is not set
# CONFIG_ATM_HORIZON is not set
CONFIG_ATM_IA=y
CONFIG_ATM_IA_DEBUG=y
# CONFIG_ATM_FORE200E_MAYBE is not set
# CONFIG_ATM_HE is not set
CONFIG_FDDI=y
CONFIG_DEFXX=y
CONFIG_DEFXX_MMIO=y
# CONFIG_SKFP is not set
CONFIG_HIPPI=y
CONFIG_ROADRUNNER=y
CONFIG_ROADRUNNER_LARGE_RINGS=y
# CONFIG_PPP is not set
CONFIG_SLIP=y
# CONFIG_SLIP_COMPRESSED is not set
# CONFIG_SLIP_SMART is not set
# CONFIG_SLIP_MODE_SLIP6 is not set
CONFIG_NET_FC=y
CONFIG_NETCONSOLE=y
CONFIG_NETCONSOLE_DYNAMIC=y
CONFIG_NETPOLL=y
CONFIG_NETPOLL_TRAP=y
CONFIG_NET_POLL_CONTROLLER=y
# CONFIG_VIRTIO_NET is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=y
CONFIG_INPUT_POLLDEV=y
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
CONFIG_INPUT_EVBUG=y
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
CONFIG_KEYBOARD_XTKBD=y
CONFIG_KEYBOARD_NEWTON=y
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_INPUT_MOUSE is not set
CONFIG_INPUT_JOYSTICK=y
CONFIG_JOYSTICK_ANALOG=y
# CONFIG_JOYSTICK_A3D is not set
# CONFIG_JOYSTICK_ADI is not set
CONFIG_JOYSTICK_COBRA=y
CONFIG_JOYSTICK_GF2K=y
CONFIG_JOYSTICK_GRIP=y
# CONFIG_JOYSTICK_GRIP_MP is not set
CONFIG_JOYSTICK_GUILLEMOT=y
CONFIG_JOYSTICK_INTERACT=y
# CONFIG_JOYSTICK_SIDEWINDER is not set
CONFIG_JOYSTICK_TMDC=y
# CONFIG_JOYSTICK_IFORCE is not set
# CONFIG_JOYSTICK_WARRIOR is not set
CONFIG_JOYSTICK_MAGELLAN=y
CONFIG_JOYSTICK_SPACEORB=y
# CONFIG_JOYSTICK_SPACEBALL is not set
# CONFIG_JOYSTICK_STINGER is not set
# CONFIG_JOYSTICK_TWIDJOY is not set
# CONFIG_JOYSTICK_JOYDUMP is not set
# CONFIG_JOYSTICK_XPAD is not set
CONFIG_INPUT_TABLET=y
CONFIG_TABLET_USB_ACECAD=y
CONFIG_TABLET_USB_AIPTEK=y
CONFIG_TABLET_USB_GTCO=y
# CONFIG_TABLET_USB_KBTAB is not set
CONFIG_TABLET_USB_WACOM=y
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=y
CONFIG_GAMEPORT=y
# CONFIG_GAMEPORT_NS558 is not set
# CONFIG_GAMEPORT_L4 is not set
CONFIG_GAMEPORT_EMU10K1=y
# CONFIG_GAMEPORT_FM801 is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
# CONFIG_HW_RANDOM_INTEL is not set
# CONFIG_HW_RANDOM_AMD is not set
CONFIG_HW_RANDOM_GEODE=y
# CONFIG_HW_RANDOM_VIA is not set
CONFIG_NVRAM=y
CONFIG_RTC=y
CONFIG_DTLK=y
CONFIG_R3964=y
# CONFIG_APPLICOM is not set
CONFIG_SONYPI=y
# CONFIG_MWAVE is not set
# CONFIG_PC8736x_GPIO is not set
# CONFIG_NSC_GPIO is not set
# CONFIG_CS5535_GPIO is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HPET is not set
CONFIG_HANGCHECK_TIMER=y
CONFIG_TCG_TPM=y
# CONFIG_TCG_TIS is not set
CONFIG_TCG_NSC=y
CONFIG_TCG_ATMEL=y
# CONFIG_TCG_INFINEON is not set
CONFIG_TELCLOCK=y
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=y
CONFIG_I2C_ALGOPCF=y
CONFIG_I2C_ALGOPCA=y
#
# I2C Hardware Bus support
#
CONFIG_I2C_ALI1535=y
CONFIG_I2C_ALI1563=y
# CONFIG_I2C_ALI15X3 is not set
CONFIG_I2C_AMD756=y
# CONFIG_I2C_AMD756_S4882 is not set
CONFIG_I2C_AMD8111=y
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_I810 is not set
# CONFIG_I2C_PIIX4 is not set
CONFIG_I2C_NFORCE2=y
CONFIG_I2C_OCORES=y
CONFIG_I2C_PARPORT_LIGHT=y
# CONFIG_I2C_PROSAVAGE is not set
CONFIG_I2C_SAVAGE4=y
# CONFIG_I2C_SIMTEC is not set
# CONFIG_SCx200_ACB is not set
# CONFIG_I2C_SIS5595 is not set
CONFIG_I2C_SIS630=y
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
CONFIG_I2C_VOODOO3=y
CONFIG_I2C_PCA_ISA=y
#
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
CONFIG_SENSORS_PCF8591=y
# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
CONFIG_I2C_DEBUG_CORE=y
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
CONFIG_I2C_DEBUG_CHIP=y
#
# SPI support
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
CONFIG_W1=y
# CONFIG_W1_CON is not set
#
# 1-wire Bus Masters
#
# CONFIG_W1_MASTER_MATROX is not set
CONFIG_W1_MASTER_DS2490=y
# CONFIG_W1_MASTER_DS2482 is not set
#
# 1-wire Slaves
#
CONFIG_W1_SLAVE_THERM=y
CONFIG_W1_SLAVE_SMEM=y
# CONFIG_W1_SLAVE_DS2433 is not set
# CONFIG_W1_SLAVE_DS2760 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
CONFIG_HWMON_VID=y
CONFIG_SENSORS_ABITUGURU=y
# CONFIG_SENSORS_ABITUGURU3 is not set
CONFIG_SENSORS_AD7418=y
# CONFIG_SENSORS_ADM1021 is not set
CONFIG_SENSORS_ADM1025=y
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
CONFIG_SENSORS_ADM9240=y
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_K8TEMP is not set
# CONFIG_SENSORS_ASB100 is not set
CONFIG_SENSORS_ATXP1=y
CONFIG_SENSORS_DS1621=y
CONFIG_SENSORS_I5K_AMB=y
CONFIG_SENSORS_F71805F=y
CONFIG_SENSORS_F71882FG=y
# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_FSCHER is not set
CONFIG_SENSORS_FSCPOS=y
# CONFIG_SENSORS_FSCHMD is not set
# CONFIG_SENSORS_GL518SM is not set
CONFIG_SENSORS_GL520SM=y
# CONFIG_SENSORS_CORETEMP is not set
# CONFIG_SENSORS_IT87 is not set
CONFIG_SENSORS_LM63=y
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
CONFIG_SENSORS_LM78=y
# CONFIG_SENSORS_LM80 is not set
CONFIG_SENSORS_LM83=y
CONFIG_SENSORS_LM85=y
CONFIG_SENSORS_LM87=y
CONFIG_SENSORS_LM90=y
# CONFIG_SENSORS_LM92 is not set
CONFIG_SENSORS_LM93=y
CONFIG_SENSORS_MAX1619=y
CONFIG_SENSORS_MAX6650=y
CONFIG_SENSORS_PC87360=y
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_SIS5595 is not set
CONFIG_SENSORS_DME1737=y
CONFIG_SENSORS_SMSC47M1=y
# CONFIG_SENSORS_SMSC47M192 is not set
CONFIG_SENSORS_SMSC47B397=y
CONFIG_SENSORS_ADS7828=y
CONFIG_SENSORS_THMC50=y
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
CONFIG_SENSORS_W83792D=y
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83L785TS is not set
CONFIG_SENSORS_W83L786NG=y
# CONFIG_SENSORS_W83627HF is not set
CONFIG_SENSORS_W83627EHF=y
CONFIG_SENSORS_HDAPS=y
CONFIG_SENSORS_APPLESMC=y
# CONFIG_HWMON_DEBUG_CHIP is not set
# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_NOWAYOUT=y
#
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not set
CONFIG_ACQUIRE_WDT=y
CONFIG_ADVANTECH_WDT=y
CONFIG_ALIM1535_WDT=y
# CONFIG_ALIM7101_WDT is not set
CONFIG_SC520_WDT=y
# CONFIG_EUROTECH_WDT is not set
CONFIG_IB700_WDT=y
CONFIG_IBMASR=y
# CONFIG_WAFER_WDT is not set
CONFIG_I6300ESB_WDT=y
CONFIG_ITCO_WDT=y
CONFIG_ITCO_VENDOR_SUPPORT=y
# CONFIG_IT8712F_WDT is not set
# CONFIG_SC1200_WDT is not set
# CONFIG_PC87413_WDT is not set
# CONFIG_60XX_WDT is not set
# CONFIG_SBC8360_WDT is not set
CONFIG_SBC7240_WDT=y
# CONFIG_CPU5_WDT is not set
# CONFIG_SMSC37B787_WDT is not set
CONFIG_W83627HF_WDT=y
# CONFIG_W83697HF_WDT is not set
CONFIG_W83877F_WDT=y
CONFIG_W83977F_WDT=y
CONFIG_MACHZ_WDT=y
# CONFIG_SBC_EPX_C3_WATCHDOG is not set
#
# ISA-based Watchdog Cards
#
CONFIG_PCWATCHDOG=y
CONFIG_MIXCOMWD=y
# CONFIG_WDT is not set
#
# PCI-based Watchdog Cards
#
# CONFIG_PCIPCWATCHDOG is not set
CONFIG_WDTPCI=y
# CONFIG_WDT_501_PCI is not set
#
# USB-based Watchdog Cards
#
CONFIG_USBPCWATCHDOG=y
#
# Sonics Silicon Backplane
#
CONFIG_SSB_POSSIBLE=y
CONFIG_SSB=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
CONFIG_SSB_PCIHOST=y
CONFIG_SSB_DEBUG=y
CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
CONFIG_SSB_DRIVER_PCICORE=y
#
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
# CONFIG_DAB is not set
#
# Graphics support
#
CONFIG_AGP=y
CONFIG_AGP_ALI=y
CONFIG_AGP_ATI=y
# CONFIG_AGP_AMD is not set
# CONFIG_AGP_AMD64 is not set
# CONFIG_AGP_INTEL is not set
# CONFIG_AGP_NVIDIA is not set
CONFIG_AGP_SIS=y
# CONFIG_AGP_SWORKS is not set
# CONFIG_AGP_VIA is not set
# CONFIG_AGP_EFFICEON is not set
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
# CONFIG_FB is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
# CONFIG_LCD_CLASS_DEVICE is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_CORGI is not set
# CONFIG_BACKLIGHT_PROGEAR is not set
#
# Display device support
#
CONFIG_DISPLAY_SUPPORT=y
#
# Display hardware drivers
#
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_VGACON_SOFT_SCROLLBACK is not set
# CONFIG_VIDEO_SELECT is not set
# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FONT_8x16=y
#
# Sound
#
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
CONFIG_HID_DEBUG=y
# CONFIG_HIDRAW is not set
#
# USB Input Devices
#
# CONFIG_USB_HID is not set
#
# USB HID Boot Protocol drivers
#
# CONFIG_USB_KBD is not set
CONFIG_USB_MOUSE=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
CONFIG_USB_DEBUG=y
# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
CONFIG_USB_DEVICE_CLASS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_PERSIST is not set
# CONFIG_USB_OTG is not set
#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_HCD_SSB is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
CONFIG_USB_PRINTER=y
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
#
# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=y
CONFIG_USB_STORAGE_DEBUG=y
CONFIG_USB_STORAGE_DATAFAB=y
CONFIG_USB_STORAGE_FREECOM=y
CONFIG_USB_STORAGE_ISD200=y
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
CONFIG_USB_STORAGE_JUMPSHOT=y
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_KARMA is not set
CONFIG_USB_LIBUSUAL=y
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
CONFIG_USB_MICROTEK=y
# CONFIG_USB_MON is not set
#
# USB port drivers
#
CONFIG_USB_SERIAL=y
# CONFIG_USB_SERIAL_CONSOLE is not set
CONFIG_USB_EZUSB=y
# CONFIG_USB_SERIAL_GENERIC is not set
# CONFIG_USB_SERIAL_AIRCABLE is not set
CONFIG_USB_SERIAL_AIRPRIME=y
CONFIG_USB_SERIAL_ARK3116=y
CONFIG_USB_SERIAL_BELKIN=y
# CONFIG_USB_SERIAL_CH341 is not set
CONFIG_USB_SERIAL_WHITEHEAT=y
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
CONFIG_USB_SERIAL_CP2101=y
# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
CONFIG_USB_SERIAL_EMPEG=y
# CONFIG_USB_SERIAL_FTDI_SIO is not set
# CONFIG_USB_SERIAL_FUNSOFT is not set
CONFIG_USB_SERIAL_VISOR=y
CONFIG_USB_SERIAL_IPAQ=y
# CONFIG_USB_SERIAL_IR is not set
# CONFIG_USB_SERIAL_EDGEPORT is not set
# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
CONFIG_USB_SERIAL_GARMIN=y
# CONFIG_USB_SERIAL_IPW is not set
# CONFIG_USB_SERIAL_IUU is not set
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
CONFIG_USB_SERIAL_KEYSPAN=y
CONFIG_USB_SERIAL_KEYSPAN_MPR=y
# CONFIG_USB_SERIAL_KEYSPAN_USA28 is not set
CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
# CONFIG_USB_SERIAL_KEYSPAN_USA28XA is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA28XB is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA19 is not set
CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
# CONFIG_USB_SERIAL_KEYSPAN_USA19QW is not set
CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
# CONFIG_USB_SERIAL_KEYSPAN_USA49W is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA49WLC is not set
# CONFIG_USB_SERIAL_KLSI is not set
# CONFIG_USB_SERIAL_KOBIL_SCT is not set
CONFIG_USB_SERIAL_MCT_U232=y
CONFIG_USB_SERIAL_MOS7720=y
CONFIG_USB_SERIAL_MOS7840=y
CONFIG_USB_SERIAL_NAVMAN=y
# CONFIG_USB_SERIAL_PL2303 is not set
# CONFIG_USB_SERIAL_OTI6858 is not set
# CONFIG_USB_SERIAL_HP4X is not set
CONFIG_USB_SERIAL_SAFE=y
CONFIG_USB_SERIAL_SAFE_PADDED=y
# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
# CONFIG_USB_SERIAL_TI is not set
CONFIG_USB_SERIAL_CYBERJACK=y
# CONFIG_USB_SERIAL_XIRCOM is not set
CONFIG_USB_SERIAL_OPTION=y
# CONFIG_USB_SERIAL_OMNINET is not set
CONFIG_USB_SERIAL_DEBUG=y
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
CONFIG_USB_AUERSWALD=y
CONFIG_USB_RIO500=y
CONFIG_USB_LEGOTOWER=y
CONFIG_USB_LCD=y
CONFIG_USB_BERRY_CHARGE=y
# CONFIG_USB_LED is not set
CONFIG_USB_CYPRESS_CY7C63=y
CONFIG_USB_CYTHERM=y
# CONFIG_USB_PHIDGET is not set
CONFIG_USB_IDMOUSE=y
# CONFIG_USB_FTDI_ELAN is not set
CONFIG_USB_APPLEDISPLAY=y
CONFIG_USB_SISUSBVGA=y
CONFIG_USB_SISUSBVGA_CON=y
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
CONFIG_USB_ATM=y
CONFIG_USB_SPEEDTOUCH=y
# CONFIG_USB_CXACRU is not set
# CONFIG_USB_UEAGLEATM is not set
# CONFIG_USB_XUSBATM is not set
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
#
# LED drivers
#
CONFIG_LEDS_CLEVO_MAIL=y
#
# LED Triggers
#
# CONFIG_LEDS_TRIGGERS is not set
CONFIG_INFINIBAND=y
CONFIG_INFINIBAND_USER_MAD=y
CONFIG_INFINIBAND_USER_ACCESS=y
CONFIG_INFINIBAND_USER_MEM=y
CONFIG_INFINIBAND_ADDR_TRANS=y
CONFIG_INFINIBAND_MTHCA=y
CONFIG_INFINIBAND_MTHCA_DEBUG=y
CONFIG_INFINIBAND_AMSO1100=y
CONFIG_INFINIBAND_AMSO1100_DEBUG=y
# CONFIG_MLX4_INFINIBAND is not set
# CONFIG_INFINIBAND_NES is not set
CONFIG_INFINIBAND_IPOIB=y
CONFIG_INFINIBAND_IPOIB_CM=y
CONFIG_INFINIBAND_IPOIB_DEBUG=y
CONFIG_INFINIBAND_IPOIB_DEBUG_DATA=y
# CONFIG_INFINIBAND_SRP is not set
CONFIG_INFINIBAND_ISER=y
CONFIG_EDAC=y
#
# Reporting subsystems
#
# CONFIG_EDAC_DEBUG is not set
CONFIG_EDAC_MM_EDAC=y
# CONFIG_EDAC_AMD76X is not set
CONFIG_EDAC_E7XXX=y
# CONFIG_EDAC_E752X is not set
# CONFIG_EDAC_I82875P is not set
# CONFIG_EDAC_I82975X is not set
# CONFIG_EDAC_I3000 is not set
CONFIG_EDAC_I82860=y
CONFIG_EDAC_R82600=y
CONFIG_EDAC_I5000=y
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
#
# Conflicting RTC option has been selected, check GEN_RTC and RTC
#
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
CONFIG_RTC_DEBUG=y
#
# RTC interfaces
#
# CONFIG_RTC_INTF_SYSFS is not set
# CONFIG_RTC_INTF_PROC is not set
# CONFIG_RTC_INTF_DEV is not set
# CONFIG_RTC_DRV_TEST is not set
#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_DS1307 is not set
# CONFIG_RTC_DRV_DS1374 is not set
# CONFIG_RTC_DRV_DS1672 is not set
CONFIG_RTC_DRV_MAX6900=y
# CONFIG_RTC_DRV_RS5C372 is not set
# CONFIG_RTC_DRV_ISL1208 is not set
CONFIG_RTC_DRV_X1205=y
CONFIG_RTC_DRV_PCF8563=y
# CONFIG_RTC_DRV_PCF8583 is not set
CONFIG_RTC_DRV_M41T80=y
CONFIG_RTC_DRV_M41T80_WDT=y
#
# SPI RTC drivers
#
#
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
CONFIG_RTC_DRV_DS1511=y
# CONFIG_RTC_DRV_DS1553 is not set
CONFIG_RTC_DRV_DS1742=y
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T59 is not set
CONFIG_RTC_DRV_V3020=y
#
# on-CPU RTC drivers
#
# CONFIG_DMADEVICES is not set
#
# Userspace I/O
#
CONFIG_UIO=y
# CONFIG_UIO_CIF is not set
#
# Firmware Drivers
#
# CONFIG_EDD is not set
CONFIG_DELL_RBU=y
CONFIG_DCDBAS=y
# CONFIG_DMIID is not set
#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_EXT4DEV_FS=y
CONFIG_EXT4DEV_FS_XATTR=y
CONFIG_EXT4DEV_FS_POSIX_ACL=y
CONFIG_EXT4DEV_FS_SECURITY=y
CONFIG_JBD=y
CONFIG_JBD_DEBUG=y
CONFIG_JBD2=y
CONFIG_JBD2_DEBUG=y
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=y
# CONFIG_REISERFS_CHECK is not set
CONFIG_REISERFS_PROC_INFO=y
CONFIG_REISERFS_FS_XATTR=y
# CONFIG_REISERFS_FS_POSIX_ACL is not set
CONFIG_REISERFS_FS_SECURITY=y
CONFIG_JFS_FS=y
# CONFIG_JFS_POSIX_ACL is not set
# CONFIG_JFS_SECURITY is not set
CONFIG_JFS_DEBUG=y
# CONFIG_JFS_STATISTICS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=y
# CONFIG_XFS_QUOTA is not set
CONFIG_XFS_SECURITY=y
# CONFIG_XFS_POSIX_ACL is not set
# CONFIG_XFS_RT is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
# CONFIG_INOTIFY_USER is not set
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
CONFIG_PRINT_QUOTA_WARNING=y
# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y
# CONFIG_FUSE_FS is not set
CONFIG_GENERIC_ACL=y
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
# CONFIG_UDF_FS is not set
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_CONFIGFS_FS=y
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
CONFIG_ECRYPT_FS=y
CONFIG_HFS_FS=y
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
CONFIG_BFS_FS=y
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
CONFIG_VXFS_FS=y
CONFIG_MINIX_FS=y
CONFIG_HPFS_FS=y
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_SYSV_FS=y
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
# CONFIG_NFS_FS is not set
# CONFIG_NFSD is not set
# CONFIG_SMB_FS is not set
CONFIG_CIFS=y
CONFIG_CIFS_STATS=y
# CONFIG_CIFS_STATS2 is not set
CONFIG_CIFS_WEAK_PW_HASH=y
CONFIG_CIFS_XATTR=y
# CONFIG_CIFS_POSIX is not set
# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_EXPERIMENTAL is not set
# CONFIG_NCP_FS is not set
CONFIG_CODA_FS=y
CONFIG_CODA_FS_OLD_API=y
# CONFIG_AFS_FS is not set
CONFIG_9P_FS=y
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
CONFIG_OSF_PARTITION=y
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
# CONFIG_SOLARIS_X86_PARTITION is not set
CONFIG_UNIXWARE_DISKLABEL=y
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
CONFIG_ULTRIX_PARTITION=y
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
CONFIG_SYSV68_PARTITION=y
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_CODEPAGE_437 is not set
CONFIG_NLS_CODEPAGE_737=y
CONFIG_NLS_CODEPAGE_775=y
CONFIG_NLS_CODEPAGE_850=y
CONFIG_NLS_CODEPAGE_852=y
CONFIG_NLS_CODEPAGE_855=y
CONFIG_NLS_CODEPAGE_857=y
CONFIG_NLS_CODEPAGE_860=y
# CONFIG_NLS_CODEPAGE_861 is not set
CONFIG_NLS_CODEPAGE_862=y
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
CONFIG_NLS_CODEPAGE_865=y
# CONFIG_NLS_CODEPAGE_866 is not set
CONFIG_NLS_CODEPAGE_869=y
# CONFIG_NLS_CODEPAGE_936 is not set
CONFIG_NLS_CODEPAGE_950=y
# CONFIG_NLS_CODEPAGE_932 is not set
CONFIG_NLS_CODEPAGE_949=y
# CONFIG_NLS_CODEPAGE_874 is not set
CONFIG_NLS_ISO8859_8=y
CONFIG_NLS_CODEPAGE_1250=y
CONFIG_NLS_CODEPAGE_1251=y
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_ISO8859_2=y
CONFIG_NLS_ISO8859_3=y
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
CONFIG_NLS_ISO8859_7=y
CONFIG_NLS_ISO8859_9=y
# CONFIG_NLS_ISO8859_13 is not set
CONFIG_NLS_ISO8859_14=y
# CONFIG_NLS_ISO8859_15 is not set
CONFIG_NLS_KOI8_R=y
CONFIG_NLS_KOI8_U=y
CONFIG_NLS_UTF8=y
CONFIG_DLM=y
CONFIG_DLM_DEBUG=y
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_PRINTK_TIME=y
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_UNUSED_SYMBOLS=y
CONFIG_DEBUG_FS=y
CONFIG_HEADERS_CHECK=y
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_SHIRQ=y
CONFIG_DETECT_SOFTLOCKUP=y
CONFIG_SCHED_DEBUG=y
CONFIG_SCHEDSTATS=y
# CONFIG_TIMER_STATS is not set
CONFIG_SLUB_DEBUG_ON=y
# CONFIG_SLUB_STATS is not set
CONFIG_DEBUG_PREEMPT=y
CONFIG_DEBUG_RT_MUTEXES=y
CONFIG_DEBUG_PI_LIST=y
CONFIG_RT_MUTEX_TESTER=y
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
CONFIG_DEBUG_LOCK_ALLOC=y
# CONFIG_PROVE_LOCKING is not set
CONFIG_LOCKDEP=y
CONFIG_LOCK_STAT=y
# CONFIG_DEBUG_LOCKDEP is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
CONFIG_DEBUG_LOCKING_API_SELFTESTS=y
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
CONFIG_DEBUG_SG=y
CONFIG_FRAME_POINTER=y
CONFIG_FORCED_INLINING=y
# CONFIG_BOOT_PRINTK_DELAY is not set
CONFIG_BACKTRACE_SELF_TEST=y
CONFIG_FAULT_INJECTION=y
CONFIG_FAILSLAB=y
CONFIG_FAIL_PAGE_ALLOC=y
CONFIG_FAIL_MAKE_REQUEST=y
# CONFIG_FAULT_INJECTION_DEBUG_FS is not set
# CONFIG_LATENCYTOP is not set
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
CONFIG_SAMPLES=y
# CONFIG_SAMPLE_KOBJECT is not set
CONFIG_EARLY_PRINTK=y
CONFIG_DEBUG_STACKOVERFLOW=y
# CONFIG_DEBUG_STACK_USAGE is not set
#
# Page alloc debug is incompatible with Software Suspend on i386
#
CONFIG_DEBUG_PAGEALLOC=y
# CONFIG_DEBUG_RODATA is not set
# CONFIG_4KSTACKS is not set
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y
CONFIG_DOUBLEFAULT=y
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=0
CONFIG_DEBUG_BOOT_PARAMS=y
CONFIG_CPA_DEBUG=y
#
# Security options
#
CONFIG_KEYS=y
# CONFIG_KEYS_DEBUG_PROC_KEYS is not set
CONFIG_SECURITY=y
CONFIG_SECURITY_NETWORK=y
CONFIG_SECURITY_NETWORK_XFRM=y
CONFIG_SECURITY_CAPABILITIES=y
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
# CONFIG_SECURITY_ROOTPLUG is not set
CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
# CONFIG_SECURITY_SMACK is not set
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_SEQIV=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=y
CONFIG_CRYPTO_NULL=y
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_SHA1=y
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
CONFIG_CRYPTO_WP512=y
CONFIG_CRYPTO_TGR192=y
CONFIG_CRYPTO_GF128MUL=y
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_CBC=y
# CONFIG_CRYPTO_PCBC is not set
CONFIG_CRYPTO_LRW=y
CONFIG_CRYPTO_XTS=y
CONFIG_CRYPTO_CTR=y
CONFIG_CRYPTO_GCM=y
CONFIG_CRYPTO_CCM=y
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_FCRYPT=y
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_TWOFISH_586 is not set
# CONFIG_CRYPTO_SERPENT is not set
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_AES_586=y
# CONFIG_CRYPTO_CAST5 is not set
CONFIG_CRYPTO_CAST6=y
# CONFIG_CRYPTO_TEA is not set
CONFIG_CRYPTO_ARC4=y
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SALSA20_586 is not set
# CONFIG_CRYPTO_DEFLATE is not set
CONFIG_CRYPTO_MICHAEL_MIC=y
CONFIG_CRYPTO_CRC32C=y
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_AUTHENC is not set
CONFIG_CRYPTO_LZO=y
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_PADLOCK is not set
CONFIG_CRYPTO_DEV_GEODE=y
CONFIG_CRYPTO_DEV_HIFN_795X=y
CONFIG_CRYPTO_DEV_HIFN_795X_RNG=y
CONFIG_VIRTUALIZATION=y
CONFIG_VIRTIO=y
CONFIG_VIRTIO_RING=y
CONFIG_VIRTIO_PCI=y
CONFIG_VIRTIO_BALLOON=y
#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
CONFIG_CRC7=y
CONFIG_LIBCRC32C=y
CONFIG_ZLIB_INFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=y
CONFIG_TEXTSEARCH_BM=y
CONFIG_TEXTSEARCH_FSM=y
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_CHECK_SIGNATURE=y
[-- Attachment #3: Type: text/plain, Size: 0 bytes --]
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [GIT PATCH] ACPI patches for 2.6.25-rc0
[not found] ` <20080209063439.GA19995@elte.hu>
@ 2008-02-09 6:36 ` Ingo Molnar
[not found] ` <20080209063619.GA20225@elte.hu>
1 sibling, 0 replies; 6+ messages in thread
From: Ingo Molnar @ 2008-02-09 6:36 UTC (permalink / raw)
To: Len Brown
Cc: Thomas Sujith, linux-kernel, linux-acpi, linux-pm, Andrew Morton,
Linus Torvalds
* Ingo Molnar <mingo@elte.hu> wrote:
> one of these caused a build failure in x86.git overnight randconfig
> testing:
>
> drivers/built-in.o: In function `acpi_fan_remove':
> fan.c:(.text+0x361d5): undefined reference to `thermal_cooling_device_unregister'
> drivers/built-in.o: In function `acpi_fan_add':
> fan.c:(.text+0x3625e): undefined reference to `thermal_cooling_device_register'
>
> i suspect it might be this one:
>
> > ACPI: register ACPI thermal zone as generic thermal zone devices
>
> config attached.
yep, reverting 05a83d972293f3 fixes the build failure.
Ingo
-------------->
commit 05a83d972293f39a66bc2aa409a5e7996bba585d
Author: Zhang Rui <rui.zhang@intel.com>
Date: Thu Jan 17 15:51:24 2008 +0800
ACPI: register ACPI Fan as generic thermal cooling device
Register ACPI Fan as thermal cooling device.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Thomas Sujith <sujith.thomas@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
diff --git a/drivers/acpi/fan.c b/drivers/acpi/fan.c
index a6e149d..f6e8165 100644
--- a/drivers/acpi/fan.c
+++ b/drivers/acpi/fan.c
@@ -30,7 +30,7 @@
#include <linux/proc_fs.h>
#include <linux/seq_file.h>
#include <asm/uaccess.h>
-
+#include <linux/thermal.h>
#include <acpi/acpi_bus.h>
#include <acpi/acpi_drivers.h>
@@ -68,9 +68,55 @@ static struct acpi_driver acpi_fan_driver = {
},
};
+/* thermal cooling device callbacks */
+static int fan_get_max_state(struct thermal_cooling_device *cdev, char *buf)
+{
+ /* ACPI fan device only support two states: ON/OFF */
+ return sprintf(buf, "1\n");
+}
+
+static int fan_get_cur_state(struct thermal_cooling_device *cdev, char *buf)
+{
+ struct acpi_device *device = cdev->devdata;
+ int state;
+ int result;
+
+ if (!device)
+ return -EINVAL;
+
+ result = acpi_bus_get_power(device->handle, &state);
+ if (result)
+ return result;
+
+ return sprintf(buf, "%s\n", state == ACPI_STATE_D3 ? "0" :
+ (state == ACPI_STATE_D0 ? "1" : "unknown"));
+}
+
+static int
+fan_set_cur_state(struct thermal_cooling_device *cdev, unsigned int state)
+{
+ struct acpi_device *device = cdev->devdata;
+ int result;
+
+ if (!device || (state != 0 && state != 1))
+ return -EINVAL;
+
+ result = acpi_bus_set_power(device->handle,
+ state ? ACPI_STATE_D0 : ACPI_STATE_D3);
+
+ return result;
+}
+
+static struct thermal_cooling_device_ops fan_cooling_ops = {
+ .get_max_state = fan_get_max_state,
+ .get_cur_state = fan_get_cur_state,
+ .set_cur_state = fan_set_cur_state,
+};
+
/* --------------------------------------------------------------------------
FS Interface (/proc)
-------------------------------------------------------------------------- */
+#ifdef CONFIG_ACPI_PROCFS
static struct proc_dir_entry *acpi_fan_dir;
@@ -171,7 +217,17 @@ static int acpi_fan_remove_fs(struct acpi_device *device)
return 0;
}
+#else
+static int acpi_fan_add_fs(struct acpi_device *device)
+{
+ return 0;
+}
+static int acpi_fan_remove_fs(struct acpi_device *device)
+{
+ return 0;
+}
+#endif
/* --------------------------------------------------------------------------
Driver Interface
-------------------------------------------------------------------------- */
@@ -179,9 +235,8 @@ static int acpi_fan_remove_fs(struct acpi_device *device)
static int acpi_fan_add(struct acpi_device *device)
{
int result = 0;
- struct acpi_fan *fan = NULL;
int state = 0;
-
+ struct thermal_cooling_device *cdev;
if (!device)
return -EINVAL;
@@ -199,6 +254,25 @@ static int acpi_fan_add(struct acpi_device *device)
acpi_bus_set_power(device->handle, state);
device->flags.force_power_state = 0;
+ cdev = thermal_cooling_device_register("Fan", device,
+ &fan_cooling_ops);
+ if (cdev)
+ printk(KERN_INFO PREFIX
+ "%s is registered as cooling_device%d\n",
+ device->dev.bus_id, cdev->id);
+ else
+ goto end;
+ acpi_driver_data(device) = cdev;
+ result = sysfs_create_link(&device->dev.kobj, &cdev->device.kobj,
+ "thermal_cooling");
+ if (result)
+ return result;
+
+ result = sysfs_create_link(&cdev->device.kobj, &device->dev.kobj,
+ "device");
+ if (result)
+ return result;
+
result = acpi_fan_add_fs(device);
if (result)
goto end;
@@ -208,18 +282,20 @@ static int acpi_fan_add(struct acpi_device *device)
!device->power.state ? "on" : "off");
end:
- if (result)
- kfree(fan);
-
return result;
}
static int acpi_fan_remove(struct acpi_device *device, int type)
{
- if (!device || !acpi_driver_data(device))
+ struct thermal_cooling_device *cdev = acpi_driver_data(device);
+
+ if (!device || !cdev)
return -EINVAL;
acpi_fan_remove_fs(device);
+ sysfs_remove_link(&device->dev.kobj, "thermal_cooling");
+ sysfs_remove_link(&cdev->device.kobj, "device");
+ thermal_cooling_device_unregister(cdev);
return 0;
}
^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [GIT PATCH] ACPI patches for 2.6.25-rc0
[not found] ` <20080209063619.GA20225@elte.hu>
@ 2008-02-09 8:27 ` Ingo Molnar
[not found] ` <20080209082748.GA7792@elte.hu>
1 sibling, 0 replies; 6+ messages in thread
From: Ingo Molnar @ 2008-02-09 8:27 UTC (permalink / raw)
To: Len Brown
Cc: Thomas Sujith, linux-kernel, linux-acpi, linux-pm, Andrew Morton,
Linus Torvalds
* Ingo Molnar <mingo@elte.hu> wrote:
> > i suspect it might be this one:
> >
> > > ACPI: register ACPI thermal zone as generic thermal zone devices
> >
> > config attached.
>
> yep, reverting 05a83d972293f3 fixes the build failure.
that fixed the build failure on 32-bit, but there's another one i just
hit on 64-bit x86:
drivers/built-in.o: In function `acpi_video_bus_put_devices':
video.c:(.text+0x5540d): undefined reference to `thermal_cooling_device_unregister'
drivers/built-in.o: In function `acpi_video_bus_add':
video.c:(.text+0x56994): undefined reference to `thermal_cooling_device_register'
which is due to:
commit 702ed512de9c8a67a69a981c73b7337c2131f198
Date: Thu Jan 17 15:51:22 2008 +0800
ACPI: register ACPI Video LCD as generic thermal cooling device
the commit couldnt be reverted cleanly, i've done a manual fixup of the
revert (find the patch below).
but i suspect the third "generic thermal cooling device" patch might be
broken too:
commit d9460fd227ed2ce52941b6a12ad4de05c195f6aa
Date: Thu Jan 17 15:51:23 2008 +0800
ACPI: register ACPI Processor as generic thermal cooling device
so i've preventively reverted that too, to keep x86-qa running. (that
reverts cleanly without manual merging)
Ingo
-------------------->
Subject: x86: acpi-revert2
From: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
drivers/acpi/video.c | 78 ---------------------------------------------------
1 file changed, 1 insertion(+), 77 deletions(-)
Index: linux/drivers/acpi/video.c
===================================================================
--- linux.orig/drivers/acpi/video.c
+++ linux/drivers/acpi/video.c
@@ -34,7 +34,6 @@
#include <linux/seq_file.h>
#include <linux/input.h>
#include <linux/backlight.h>
-#include <linux/thermal.h>
#include <linux/video_output.h>
#include <asm/uaccess.h>
@@ -185,7 +184,6 @@ struct acpi_video_device {
struct acpi_device *dev;
struct acpi_video_device_brightness *brightness;
struct backlight_device *backlight;
- struct thermal_cooling_device *cdev;
struct output_device *output_dev;
};
@@ -348,54 +346,6 @@ static struct output_properties acpi_out
.set_state = acpi_video_output_set,
.get_status = acpi_video_output_get,
};
-
-
-/* thermal cooling device callbacks */
-static int video_get_max_state(struct thermal_cooling_device *cdev, char *buf)
-{
- struct acpi_device *device = cdev->devdata;
- struct acpi_video_device *video = acpi_driver_data(device);
-
- return sprintf(buf, "%d\n", video->brightness->count - 3);
-}
-
-static int video_get_cur_state(struct thermal_cooling_device *cdev, char *buf)
-{
- struct acpi_device *device = cdev->devdata;
- struct acpi_video_device *video = acpi_driver_data(device);
- unsigned long level;
- int state;
-
- acpi_video_device_lcd_get_level_current(video, &level);
- for (state = 2; state < video->brightness->count; state++)
- if (level == video->brightness->levels[state])
- return sprintf(buf, "%d\n",
- video->brightness->count - state - 1);
-
- return -EINVAL;
-}
-
-static int
-video_set_cur_state(struct thermal_cooling_device *cdev, unsigned int state)
-{
- struct acpi_device *device = cdev->devdata;
- struct acpi_video_device *video = acpi_driver_data(device);
- int level;
-
- if ( state >= video->brightness->count - 2)
- return -EINVAL;
-
- state = video->brightness->count - state;
- level = video->brightness->levels[state -1];
- return acpi_video_device_lcd_set_level(video, level);
-}
-
-static struct thermal_cooling_device_ops video_cooling_ops = {
- .get_max_state = video_get_max_state,
- .get_cur_state = video_get_cur_state,
- .set_cur_state = video_set_cur_state,
-};
-
/* --------------------------------------------------------------------------
Video Management
-------------------------------------------------------------------------- */
@@ -714,7 +664,6 @@ static void acpi_video_device_find_cap(s
kfree(obj);
if (device->cap._BCL && device->cap._BCM && device->cap._BQC && max_level > 0){
- int result;
static int count = 0;
char *name;
name = kzalloc(MAX_NAME_LEN, GFP_KERNEL);
@@ -727,25 +676,8 @@ static void acpi_video_device_find_cap(s
device->backlight->props.max_brightness = device->brightness->count-3;
device->backlight->props.brightness = acpi_video_get_brightness(device->backlight);
backlight_update_status(device->backlight);
- kfree(name);
- device->cdev = thermal_cooling_device_register("LCD",
- device->dev, &video_cooling_ops);
- if (device->cdev) {
- printk(KERN_INFO PREFIX
- "%s is registered as cooling_device%d\n",
- device->dev->dev.bus_id, device->cdev->id);
- result = sysfs_create_link(&device->dev->dev.kobj,
- &device->cdev->device.kobj,
- "thermal_cooling");
- if (result)
- printk(KERN_ERR PREFIX "Create sysfs link\n");
- result = sysfs_create_link(&device->cdev->device.kobj,
- &device->dev->dev.kobj,
- "device");
- if (result)
- printk(KERN_ERR PREFIX "Create sysfs link\n");
- }
+ kfree(name);
}
if (device->cap._DCS && device->cap._DSS){
static int count = 0;
@@ -1807,14 +1739,6 @@ static int acpi_video_bus_put_one_device
ACPI_DEVICE_NOTIFY,
acpi_video_device_notify);
backlight_device_unregister(device->backlight);
- if (device->cdev) {
- sysfs_remove_link(&device->dev->dev.kobj,
- "thermal_cooling");
- sysfs_remove_link(&device->cdev->device.kobj,
- "device");
- thermal_cooling_device_unregister(device->cdev);
- device->cdev = NULL;
- }
video_output_unregister(device->output_dev);
return 0;
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [GIT PATCH] ACPI patches for 2.6.25-rc0
[not found] ` <20080209082748.GA7792@elte.hu>
@ 2008-02-09 8:31 ` Ingo Molnar
[not found] ` <20080209083143.GA9634@elte.hu>
1 sibling, 0 replies; 6+ messages in thread
From: Ingo Molnar @ 2008-02-09 8:31 UTC (permalink / raw)
To: Len Brown
Cc: Thomas Sujith, linux-kernel, linux-acpi, linux-pm, Andrew Morton,
Linus Torvalds
[-- Attachment #1: Type: text/plain, Size: 837 bytes --]
* Ingo Molnar <mingo@elte.hu> wrote:
> that fixed the build failure on 32-bit, but there's another one i just
> hit on 64-bit x86:
>
> drivers/built-in.o: In function `acpi_video_bus_put_devices':
> video.c:(.text+0x5540d): undefined reference to `thermal_cooling_device_unregister'
> drivers/built-in.o: In function `acpi_video_bus_add':
> video.c:(.text+0x56994): undefined reference to `thermal_cooling_device_register'
>
> which is due to:
>
> commit 702ed512de9c8a67a69a981c73b7337c2131f198
> Date: Thu Jan 17 15:51:22 2008 +0800
>
> ACPI: register ACPI Video LCD as generic thermal cooling device
>
> the commit couldnt be reverted cleanly, i've done a manual fixup of
> the revert (find the patch below).
(config for that build breakage attached, in case you were wondering
about how to trigger it.)
Ingo
[-- Attachment #2: config --]
[-- Type: text/plain, Size: 53222 bytes --]
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.24
# Sat Feb 9 09:21:45 2008
#
CONFIG_64BIT=y
# CONFIG_X86_32 is not set
CONFIG_X86_64=y
CONFIG_X86=y
# CONFIG_GENERIC_LOCKBREAK is not set
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_SEMAPHORE_SLEEPERS=y
CONFIG_FAST_CMPXCHG_LOCAL=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
# CONFIG_QUICKLIST is not set
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_HWEIGHT=y
# CONFIG_GENERIC_GPIO is not set
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_DMI=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ZONE_DMA32=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_AUDIT_ARCH=y
CONFIG_ARCH_SUPPORTS_AOUT=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
# CONFIG_KTIME_SCALAR is not set
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
# CONFIG_IKCONFIG_PROC is not set
CONFIG_LOG_BUF_SHIFT=20
# CONFIG_CGROUPS is not set
# CONFIG_FAIR_GROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_RELAY=y
CONFIG_NAMESPACES=y
# CONFIG_UTS_NS is not set
CONFIG_IPC_NS=y
# CONFIG_USER_NS is not set
CONFIG_PID_NS=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_EXTRA_PASS=y
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
# CONFIG_MARKERS is not set
CONFIG_OPROFILE=y
CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y
CONFIG_HAVE_KPROBES=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
# CONFIG_KMOD is not set
CONFIG_BLOCK=y
CONFIG_BLK_DEV_IO_TRACE=y
# CONFIG_BLK_DEV_BSG is not set
CONFIG_BLOCK_COMPAT=y
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=m
CONFIG_IOSCHED_CFQ=m
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
CONFIG_DEFAULT_NOOP=y
CONFIG_DEFAULT_IOSCHED="noop"
CONFIG_PREEMPT_NOTIFIERS=y
CONFIG_CLASSIC_RCU=y
# CONFIG_PREEMPT_RCU is not set
#
# Processor type and features
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_SMP is not set
CONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_X86_RDC321X is not set
# CONFIG_X86_VSMP is not set
CONFIG_PARAVIRT_GUEST=y
CONFIG_PARAVIRT=y
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MPSC is not set
CONFIG_MCORE2=y
# CONFIG_GENERIC_CPU is not set
CONFIG_X86_L1_CACHE_BYTES=64
CONFIG_X86_INTERNODE_CACHE_BYTES=64
CONFIG_X86_CMPXCHG=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_TSC=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_GART_IOMMU=y
CONFIG_CALGARY_IOMMU=y
# CONFIG_CALGARY_IOMMU_ENABLED_BY_DEFAULT is not set
CONFIG_IOMMU_HELPER=y
CONFIG_SWIOTLB=y
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
# CONFIG_RCU_TRACE is not set
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
# CONFIG_X86_MCE is not set
CONFIG_I8K=y
CONFIG_MICROCODE=y
CONFIG_MICROCODE_OLD_INTERFACE=y
# CONFIG_X86_MSR is not set
CONFIG_X86_CPUID=m
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
# CONFIG_DISCONTIGMEM_MANUAL is not set
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_HAVE_MEMORY_PRESENT=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
# CONFIG_SPARSEMEM_VMEMMAP is not set
# CONFIG_MEMORY_HOTPLUG is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_RESOURCES_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
# CONFIG_MTRR is not set
CONFIG_EFI=y
CONFIG_SECCOMP=y
# CONFIG_CC_STACKPROTECTOR is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
CONFIG_SCHED_HRTICK=y
# CONFIG_KEXEC is not set
CONFIG_CRASH_DUMP=y
CONFIG_PHYSICAL_START=0x200000
CONFIG_RELOCATABLE=y
CONFIG_PHYSICAL_ALIGN=0x200000
CONFIG_COMPAT_VDSO=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
#
# Power management options
#
CONFIG_PM=y
# CONFIG_PM_LEGACY is not set
# CONFIG_PM_DEBUG is not set
CONFIG_PM_SLEEP=y
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
CONFIG_ACPI=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_PROCFS=y
# CONFIG_ACPI_PROCFS_POWER is not set
# CONFIG_ACPI_SYSFS_POWER is not set
CONFIG_ACPI_PROC_EVENT=y
CONFIG_ACPI_AC=m
# CONFIG_ACPI_BATTERY is not set
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_VIDEO=y
CONFIG_ACPI_FAN=m
# CONFIG_ACPI_DOCK is not set
# CONFIG_ACPI_PROCESSOR is not set
# CONFIG_ACPI_WMI is not set
CONFIG_ACPI_ASUS=m
CONFIG_ACPI_TOSHIBA=y
CONFIG_ACPI_CUSTOM_DSDT_INITRD=y
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=m
CONFIG_ACPI_SBS=y
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
CONFIG_CPU_FREQ_DEBUG=y
CONFIG_CPU_FREQ_STAT=m
# CONFIG_CPU_FREQ_STAT_DETAILS is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=m
CONFIG_CPU_FREQ_GOV_POWERSAVE=m
CONFIG_CPU_FREQ_GOV_USERSPACE=y
# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
#
# CPUFreq processor drivers
#
# CONFIG_X86_POWERNOW_K8 is not set
CONFIG_X86_P4_CLOCKMOD=y
#
# shared options
#
CONFIG_X86_SPEEDSTEP_LIB=y
# CONFIG_CPU_IDLE is not set
#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
# CONFIG_PCI_MMCONFIG is not set
CONFIG_PCI_DOMAINS=y
CONFIG_DMAR=y
# CONFIG_DMAR_GFX_WA is not set
CONFIG_DMAR_FLOPPY_WA=y
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
CONFIG_PCI_LEGACY=y
CONFIG_HT_IRQ=y
CONFIG_ISA_DMA_API=y
CONFIG_K8_NB=y
CONFIG_PCCARD=y
# CONFIG_PCMCIA_DEBUG is not set
CONFIG_PCMCIA=y
# CONFIG_PCMCIA_LOAD_CIS is not set
# CONFIG_PCMCIA_IOCTL is not set
CONFIG_CARDBUS=y
#
# PC-card bridges
#
# CONFIG_YENTA is not set
# CONFIG_PD6729 is not set
CONFIG_I82092=m
CONFIG_PCCARD_NONSTATIC=m
# CONFIG_HOTPLUG_PCI is not set
#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
CONFIG_BINFMT_MISC=y
CONFIG_IA32_EMULATION=y
CONFIG_IA32_AOUT=m
CONFIG_COMPAT=y
CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
CONFIG_SYSVIPC_COMPAT=y
#
# Networking
#
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
CONFIG_XFRM_SUB_POLICY=y
CONFIG_XFRM_MIGRATE=y
CONFIG_XFRM_STATISTICS=y
CONFIG_NET_KEY=y
# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=y
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=y
CONFIG_INET_XFRM_TUNNEL=y
CONFIG_INET_TUNNEL=y
CONFIG_INET_XFRM_MODE_TRANSPORT=y
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
CONFIG_INET_LRO=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
CONFIG_TCP_CONG_ADVANCED=y
CONFIG_TCP_CONG_BIC=m
CONFIG_TCP_CONG_CUBIC=m
CONFIG_TCP_CONG_WESTWOOD=m
CONFIG_TCP_CONG_HTCP=y
CONFIG_TCP_CONG_HSTCP=m
CONFIG_TCP_CONG_HYBLA=y
CONFIG_TCP_CONG_VEGAS=y
CONFIG_TCP_CONG_SCALABLE=y
CONFIG_TCP_CONG_LP=m
CONFIG_TCP_CONG_VENO=y
# CONFIG_TCP_CONG_YEAH is not set
# CONFIG_TCP_CONG_ILLINOIS is not set
# CONFIG_DEFAULT_BIC is not set
# CONFIG_DEFAULT_CUBIC is not set
CONFIG_DEFAULT_HTCP=y
# CONFIG_DEFAULT_VEGAS is not set
# CONFIG_DEFAULT_WESTWOOD is not set
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="htcp"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETLABEL is not set
CONFIG_NETWORK_SECMARK=y
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_NETFILTER_ADVANCED=y
CONFIG_BRIDGE_NETFILTER=y
#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=m
# CONFIG_NETFILTER_NETLINK_QUEUE is not set
CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_NF_CONNTRACK=y
# CONFIG_NF_CT_ACCT is not set
CONFIG_NF_CONNTRACK_MARK=y
# CONFIG_NF_CONNTRACK_SECMARK is not set
CONFIG_NF_CONNTRACK_EVENTS=y
CONFIG_NF_CT_PROTO_GRE=y
CONFIG_NF_CT_PROTO_SCTP=m
CONFIG_NF_CT_PROTO_UDPLITE=y
CONFIG_NF_CONNTRACK_AMANDA=m
CONFIG_NF_CONNTRACK_FTP=y
CONFIG_NF_CONNTRACK_H323=m
CONFIG_NF_CONNTRACK_IRC=y
# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
CONFIG_NF_CONNTRACK_PPTP=y
CONFIG_NF_CONNTRACK_SANE=y
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
CONFIG_NF_CT_NETLINK=m
CONFIG_NETFILTER_XTABLES=y
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=y
# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
CONFIG_NETFILTER_XT_TARGET_NOTRACK=y
CONFIG_NETFILTER_XT_TARGET_RATEEST=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
# CONFIG_NETFILTER_XT_TARGET_SECMARK is not set
# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
CONFIG_NETFILTER_XT_MATCH_COMMENT=y
# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_CONNMARK=y
# CONFIG_NETFILTER_XT_MATCH_CONNTRACK is not set
# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HELPER=y
CONFIG_NETFILTER_XT_MATCH_IPRANGE=y
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
CONFIG_NETFILTER_XT_MATCH_MAC=y
# CONFIG_NETFILTER_XT_MATCH_MARK is not set
CONFIG_NETFILTER_XT_MATCH_OWNER=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
# CONFIG_NETFILTER_XT_MATCH_REALM is not set
# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
CONFIG_NETFILTER_XT_MATCH_STATE=y
# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
CONFIG_NETFILTER_XT_MATCH_STRING=y
CONFIG_NETFILTER_XT_MATCH_TCPMSS=y
# CONFIG_NETFILTER_XT_MATCH_TIME is not set
# CONFIG_NETFILTER_XT_MATCH_U32 is not set
# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
#
# IP: Netfilter Configuration
#
CONFIG_NF_CONNTRACK_IPV4=y
# CONFIG_NF_CONNTRACK_PROC_COMPAT is not set
# CONFIG_IP_NF_QUEUE is not set
CONFIG_IP_NF_IPTABLES=y
# CONFIG_IP_NF_MATCH_RECENT is not set
CONFIG_IP_NF_MATCH_ECN=y
# CONFIG_IP_NF_MATCH_AH is not set
# CONFIG_IP_NF_MATCH_TTL is not set
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_FILTER=y
# CONFIG_IP_NF_TARGET_REJECT is not set
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_NF_NAT=m
CONFIG_NF_NAT_NEEDED=y
# CONFIG_IP_NF_TARGET_MASQUERADE is not set
# CONFIG_IP_NF_TARGET_REDIRECT is not set
# CONFIG_IP_NF_TARGET_NETMAP is not set
CONFIG_NF_NAT_SNMP_BASIC=m
CONFIG_NF_NAT_PROTO_GRE=m
CONFIG_NF_NAT_FTP=m
CONFIG_NF_NAT_IRC=m
CONFIG_NF_NAT_TFTP=m
CONFIG_NF_NAT_AMANDA=m
CONFIG_NF_NAT_PPTP=m
CONFIG_NF_NAT_H323=m
CONFIG_NF_NAT_SIP=m
# CONFIG_IP_NF_MANGLE is not set
CONFIG_IP_NF_RAW=y
# CONFIG_IP_NF_ARPTABLES is not set
#
# Bridge: Netfilter Configuration
#
CONFIG_BRIDGE_NF_EBTABLES=m
CONFIG_BRIDGE_EBT_BROUTE=m
CONFIG_BRIDGE_EBT_T_FILTER=m
# CONFIG_BRIDGE_EBT_T_NAT is not set
# CONFIG_BRIDGE_EBT_802_3 is not set
# CONFIG_BRIDGE_EBT_AMONG is not set
CONFIG_BRIDGE_EBT_ARP=m
CONFIG_BRIDGE_EBT_IP=m
# CONFIG_BRIDGE_EBT_LIMIT is not set
# CONFIG_BRIDGE_EBT_MARK is not set
CONFIG_BRIDGE_EBT_PKTTYPE=m
CONFIG_BRIDGE_EBT_STP=m
# CONFIG_BRIDGE_EBT_VLAN is not set
CONFIG_BRIDGE_EBT_ARPREPLY=m
CONFIG_BRIDGE_EBT_DNAT=m
# CONFIG_BRIDGE_EBT_MARK_T is not set
# CONFIG_BRIDGE_EBT_REDIRECT is not set
# CONFIG_BRIDGE_EBT_SNAT is not set
# CONFIG_BRIDGE_EBT_LOG is not set
# CONFIG_BRIDGE_EBT_ULOG is not set
CONFIG_IP_DCCP=y
CONFIG_INET_DCCP_DIAG=y
CONFIG_IP_DCCP_ACKVEC=y
#
# DCCP CCIDs Configuration (EXPERIMENTAL)
#
CONFIG_IP_DCCP_CCID2=y
# CONFIG_IP_DCCP_CCID2_DEBUG is not set
CONFIG_IP_DCCP_CCID3=y
# CONFIG_IP_DCCP_CCID3_DEBUG is not set
CONFIG_IP_DCCP_CCID3_RTO=100
CONFIG_IP_DCCP_TFRC_LIB=y
CONFIG_IP_SCTP=y
CONFIG_SCTP_DBG_MSG=y
# CONFIG_SCTP_DBG_OBJCNT is not set
CONFIG_SCTP_HMAC_NONE=y
# CONFIG_SCTP_HMAC_SHA1 is not set
# CONFIG_SCTP_HMAC_MD5 is not set
# CONFIG_TIPC is not set
CONFIG_ATM=y
CONFIG_ATM_CLIP=m
CONFIG_ATM_CLIP_NO_ICMP=y
# CONFIG_ATM_LANE is not set
CONFIG_ATM_BR2684=y
# CONFIG_ATM_BR2684_IPFILTER is not set
CONFIG_BRIDGE=m
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
CONFIG_LLC=m
CONFIG_LLC2=m
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
CONFIG_X25=y
CONFIG_LAPB=m
# CONFIG_ECONET is not set
CONFIG_WAN_ROUTER=m
CONFIG_NET_SCHED=y
#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
# CONFIG_NET_SCH_HFSC is not set
CONFIG_NET_SCH_ATM=m
CONFIG_NET_SCH_PRIO=y
CONFIG_NET_SCH_RR=y
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFQ=m
# CONFIG_NET_SCH_TEQL is not set
CONFIG_NET_SCH_TBF=y
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
# CONFIG_NET_SCH_NETEM is not set
#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=m
# CONFIG_NET_CLS_TCINDEX is not set
# CONFIG_NET_CLS_ROUTE4 is not set
CONFIG_NET_CLS_FW=m
# CONFIG_NET_CLS_U32 is not set
# CONFIG_NET_CLS_RSVP is not set
# CONFIG_NET_CLS_RSVP6 is not set
# CONFIG_NET_CLS_FLOW is not set
# CONFIG_NET_EMATCH is not set
# CONFIG_NET_CLS_ACT is not set
CONFIG_NET_CLS_IND=y
CONFIG_NET_SCH_FIFO=y
#
# Network testing
#
CONFIG_NET_PKTGEN=m
# CONFIG_NET_TCPPROBE is not set
# CONFIG_HAMRADIO is not set
CONFIG_CAN=y
CONFIG_CAN_RAW=m
# CONFIG_CAN_BCM is not set
#
# CAN Device Drivers
#
CONFIG_CAN_VCAN=m
CONFIG_CAN_DEBUG_DEVICES=y
CONFIG_IRDA=m
#
# IrDA protocols
#
# CONFIG_IRLAN is not set
CONFIG_IRNET=m
CONFIG_IRCOMM=m
CONFIG_IRDA_ULTRA=y
#
# IrDA options
#
CONFIG_IRDA_CACHE_LAST_LSAP=y
# CONFIG_IRDA_FAST_RR is not set
# CONFIG_IRDA_DEBUG is not set
#
# Infrared-port device drivers
#
#
# SIR device drivers
#
# CONFIG_IRTTY_SIR is not set
#
# Dongle support
#
CONFIG_KINGSUN_DONGLE=m
CONFIG_KSDAZZLE_DONGLE=m
# CONFIG_KS959_DONGLE is not set
#
# FIR device drivers
#
# CONFIG_USB_IRDA is not set
CONFIG_SIGMATEL_FIR=m
CONFIG_NSC_FIR=m
# CONFIG_WINBOND_FIR is not set
# CONFIG_SMC_IRCC_FIR is not set
CONFIG_ALI_FIR=m
CONFIG_VLSI_FIR=m
# CONFIG_VIA_FIR is not set
CONFIG_MCS_FIR=m
# CONFIG_BT is not set
CONFIG_AF_RXRPC=y
CONFIG_AF_RXRPC_DEBUG=y
CONFIG_RXKAD=m
#
# Wireless
#
CONFIG_CFG80211=y
# CONFIG_NL80211 is not set
CONFIG_WIRELESS_EXT=y
# CONFIG_MAC80211 is not set
CONFIG_IEEE80211=y
CONFIG_IEEE80211_DEBUG=y
CONFIG_IEEE80211_CRYPT_WEP=m
# CONFIG_IEEE80211_CRYPT_CCMP is not set
CONFIG_IEEE80211_CRYPT_TKIP=m
CONFIG_IEEE80211_SOFTMAC=m
CONFIG_IEEE80211_SOFTMAC_DEBUG=y
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_SERIAL=m
CONFIG_PARPORT_PC_FIFO=y
# CONFIG_PARPORT_PC_SUPERIO is not set
CONFIG_PARPORT_PC_PCMCIA=m
# CONFIG_PARPORT_GSC is not set
CONFIG_PARPORT_AX88796=m
CONFIG_PARPORT_1284=y
CONFIG_PARPORT_NOT_PC=y
CONFIG_PNP=y
CONFIG_PNP_DEBUG=y
#
# Protocols
#
CONFIG_PNPACPI=y
# CONFIG_BLK_DEV is not set
CONFIG_MISC_DEVICES=y
# CONFIG_IBM_ASM is not set
CONFIG_PHANTOM=m
CONFIG_EEPROM_93CX6=y
# CONFIG_SGI_IOC4 is not set
CONFIG_TIFM_CORE=m
CONFIG_TIFM_7XX1=m
CONFIG_FUJITSU_LAPTOP=y
# CONFIG_MSI_LAPTOP is not set
CONFIG_SONY_LAPTOP=y
# CONFIG_SONYPI_COMPAT is not set
# CONFIG_THINKPAD_ACPI is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_IDE is not set
#
# SCSI device support
#
CONFIG_RAID_ATTRS=y
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_TGT=m
CONFIG_SCSI_NETLINK=y
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=y
CONFIG_CHR_DEV_OSST=y
CONFIG_BLK_DEV_SR=m
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=m
# CONFIG_CHR_DEV_SCH is not set
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set
CONFIG_SCSI_SCAN_ASYNC=y
CONFIG_SCSI_WAIT_SCAN=m
#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
CONFIG_SCSI_FC_ATTRS=y
# CONFIG_SCSI_ISCSI_ATTRS is not set
CONFIG_SCSI_SAS_ATTRS=y
CONFIG_SCSI_SAS_LIBSAS=y
# CONFIG_SCSI_SAS_ATA is not set
# CONFIG_SCSI_SAS_HOST_SMP is not set
# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
CONFIG_SCSI_SRP_ATTRS=m
CONFIG_SCSI_SRP_TGT_ATTRS=y
# CONFIG_SCSI_LOWLEVEL is not set
# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_ACPI=y
CONFIG_SATA_AHCI=y
CONFIG_SATA_SVW=m
CONFIG_ATA_PIIX=y
CONFIG_SATA_MV=m
CONFIG_SATA_NV=y
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_PROMISE is not set
CONFIG_SATA_SX4=m
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIL24 is not set
CONFIG_SATA_SIS=m
CONFIG_SATA_ULI=m
CONFIG_SATA_VIA=m
# CONFIG_SATA_VITESSE is not set
CONFIG_SATA_INIC162X=y
# CONFIG_PATA_ACPI is not set
CONFIG_PATA_ALI=m
CONFIG_PATA_AMD=y
CONFIG_PATA_ARTOP=y
CONFIG_PATA_ATIIXP=y
CONFIG_PATA_CMD640_PCI=y
# CONFIG_PATA_CMD64X is not set
CONFIG_PATA_CS5520=m
CONFIG_PATA_CS5530=m
CONFIG_PATA_CYPRESS=y
# CONFIG_PATA_EFAR is not set
# CONFIG_ATA_GENERIC is not set
CONFIG_PATA_HPT366=y
CONFIG_PATA_HPT37X=m
CONFIG_PATA_HPT3X2N=y
# CONFIG_PATA_HPT3X3 is not set
CONFIG_PATA_IT821X=y
CONFIG_PATA_IT8213=m
CONFIG_PATA_JMICRON=m
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_MARVELL is not set
CONFIG_PATA_MPIIX=y
CONFIG_PATA_OLDPIIX=y
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NINJA32 is not set
CONFIG_PATA_NS87410=m
CONFIG_PATA_NS87415=y
CONFIG_PATA_OPTI=y
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PCMCIA is not set
CONFIG_PATA_PDC_OLD=m
CONFIG_PATA_RADISYS=m
CONFIG_PATA_RZ1000=m
CONFIG_PATA_SC1200=m
# CONFIG_PATA_SERVERWORKS is not set
CONFIG_PATA_PDC2027X=m
# CONFIG_PATA_SIL680 is not set
CONFIG_PATA_SIS=y
CONFIG_PATA_VIA=y
CONFIG_PATA_WINBOND=m
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_LINEAR=y
CONFIG_MD_RAID0=y
# CONFIG_MD_RAID1 is not set
CONFIG_MD_RAID10=y
CONFIG_MD_RAID456=y
CONFIG_MD_RAID5_RESHAPE=y
# CONFIG_MD_MULTIPATH is not set
CONFIG_MD_FAULTY=m
# CONFIG_BLK_DEV_DM is not set
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
CONFIG_FIREWIRE=y
CONFIG_FIREWIRE_OHCI=y
# CONFIG_FIREWIRE_SBP2 is not set
CONFIG_IEEE1394=m
#
# Subsystem Options
#
# CONFIG_IEEE1394_VERBOSEDEBUG is not set
#
# Controllers
#
CONFIG_IEEE1394_PCILYNX=m
# CONFIG_IEEE1394_OHCI1394 is not set
#
# Protocols
#
CONFIG_IEEE1394_SBP2=m
CONFIG_IEEE1394_SBP2_PHYS_DMA=y
# CONFIG_IEEE1394_ETH1394_ROM_ENTRY is not set
# CONFIG_IEEE1394_ETH1394 is not set
CONFIG_IEEE1394_RAWIO=m
CONFIG_I2O=y
# CONFIG_I2O_LCT_NOTIFY_ON_CHANGES is not set
CONFIG_I2O_EXT_ADAPTEC=y
# CONFIG_I2O_EXT_ADAPTEC_DMA64 is not set
CONFIG_I2O_CONFIG=m
# CONFIG_I2O_CONFIG_OLD_IOCTL is not set
CONFIG_I2O_BUS=y
CONFIG_I2O_BLOCK=m
CONFIG_I2O_SCSI=m
CONFIG_I2O_PROC=m
CONFIG_MACINTOSH_DRIVERS=y
CONFIG_MAC_EMUMOUSEBTN=y
CONFIG_NETDEVICES=y
# CONFIG_NETDEVICES_MULTIQUEUE is not set
CONFIG_DUMMY=m
CONFIG_BONDING=m
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
CONFIG_TUN=m
# CONFIG_VETH is not set
CONFIG_NET_SB1000=y
# CONFIG_ARCNET is not set
CONFIG_PHYLIB=y
#
# MII PHY device drivers
#
CONFIG_MARVELL_PHY=m
# CONFIG_DAVICOM_PHY is not set
CONFIG_QSEMI_PHY=y
CONFIG_LXT_PHY=m
CONFIG_CICADA_PHY=y
CONFIG_VITESSE_PHY=m
CONFIG_SMSC_PHY=m
CONFIG_BROADCOM_PHY=y
CONFIG_ICPLUS_PHY=m
# CONFIG_REALTEK_PHY is not set
# CONFIG_FIXED_PHY is not set
CONFIG_MDIO_BITBANG=y
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
CONFIG_HAPPYMEAL=m
# CONFIG_SUNGEM is not set
CONFIG_CASSINI=y
# CONFIG_NET_VENDOR_3COM is not set
CONFIG_ENC28J60=y
CONFIG_ENC28J60_WRITEVERIFY=y
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
CONFIG_FORCEDETH=y
# CONFIG_FORCEDETH_NAPI is not set
CONFIG_EEPRO100=y
CONFIG_E100=y
CONFIG_FEALNX=m
CONFIG_NATSEMI=y
CONFIG_NE2K_PCI=y
# CONFIG_8139CP is not set
CONFIG_8139TOO=y
# CONFIG_8139TOO_PIO is not set
# CONFIG_8139TOO_TUNE_TWISTER is not set
CONFIG_8139TOO_8129=y
# CONFIG_8139_OLD_RX_RESET is not set
CONFIG_R6040=m
CONFIG_SIS900=y
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
CONFIG_VIA_RHINE=y
# CONFIG_VIA_RHINE_MMIO is not set
CONFIG_VIA_RHINE_NAPI=y
CONFIG_SC92031=y
# CONFIG_NET_POCKET is not set
CONFIG_NETDEV_1000=y
CONFIG_ACENIC=y
# CONFIG_ACENIC_OMIT_TIGON_I is not set
CONFIG_DL2K=y
CONFIG_E1000=y
CONFIG_E1000_NAPI=y
# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
# CONFIG_E1000E is not set
# CONFIG_E1000E_ENABLED is not set
CONFIG_IP1000=y
CONFIG_IGB=m
CONFIG_NS83820=m
# CONFIG_HAMACHI is not set
CONFIG_YELLOWFIN=y
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
CONFIG_SKY2=y
# CONFIG_SKY2_DEBUG is not set
# CONFIG_SK98LIN is not set
CONFIG_VIA_VELOCITY=m
CONFIG_TIGON3=y
CONFIG_BNX2=y
# CONFIG_QLA3XXX is not set
CONFIG_ATL1=m
CONFIG_NETDEV_10000=y
CONFIG_CHELSIO_T1=y
# CONFIG_CHELSIO_T1_1G is not set
CONFIG_CHELSIO_T1_NAPI=y
# CONFIG_CHELSIO_T3 is not set
CONFIG_IXGBE=m
CONFIG_IXGB=y
CONFIG_IXGB_NAPI=y
CONFIG_S2IO=y
CONFIG_S2IO_NAPI=y
CONFIG_MYRI10GE=y
CONFIG_NETXEN_NIC=m
CONFIG_NIU=y
# CONFIG_MLX4_CORE is not set
CONFIG_TEHUTI=y
CONFIG_BNX2X=m
# CONFIG_TR is not set
#
# Wireless LAN
#
CONFIG_WLAN_PRE80211=y
CONFIG_STRIP=m
CONFIG_PCMCIA_WAVELAN=y
CONFIG_PCMCIA_NETWAVE=y
# CONFIG_WLAN_80211 is not set
#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
CONFIG_USB_RTL8150=m
CONFIG_USB_USBNET=y
CONFIG_USB_NET_AX8817X=y
CONFIG_USB_NET_CDCETHER=y
CONFIG_USB_NET_DM9601=y
CONFIG_USB_NET_GL620A=y
CONFIG_USB_NET_NET1080=y
# CONFIG_USB_NET_PLUSB is not set
CONFIG_USB_NET_MCS7830=m
CONFIG_USB_NET_RNDIS_HOST=m
CONFIG_USB_NET_CDC_SUBSET=m
CONFIG_USB_ALI_M5632=y
CONFIG_USB_AN2720=y
# CONFIG_USB_BELKIN is not set
# CONFIG_USB_ARMLINUX is not set
# CONFIG_USB_EPSON2888 is not set
# CONFIG_USB_KC2190 is not set
CONFIG_USB_NET_ZAURUS=y
CONFIG_NET_PCMCIA=y
# CONFIG_PCMCIA_3C589 is not set
CONFIG_PCMCIA_3C574=m
CONFIG_PCMCIA_FMVJ18X=m
# CONFIG_PCMCIA_PCNET is not set
# CONFIG_PCMCIA_NMCLAN is not set
CONFIG_PCMCIA_SMC91C92=m
CONFIG_PCMCIA_XIRC2PS=y
CONFIG_PCMCIA_AXNET=m
CONFIG_WAN=y
CONFIG_LANMEDIA=y
CONFIG_HDLC=m
# CONFIG_HDLC_RAW is not set
# CONFIG_HDLC_RAW_ETH is not set
# CONFIG_HDLC_CISCO is not set
CONFIG_HDLC_FR=m
# CONFIG_HDLC_PPP is not set
# CONFIG_HDLC_X25 is not set
# CONFIG_PCI200SYN is not set
CONFIG_WANXL=m
# CONFIG_PC300 is not set
# CONFIG_PC300TOO is not set
# CONFIG_FARSYNC is not set
CONFIG_DSCC4=m
# CONFIG_DSCC4_PCISYNC is not set
# CONFIG_DSCC4_PCI_RST is not set
CONFIG_DLCI=m
CONFIG_DLCI_MAX=8
# CONFIG_WAN_ROUTER_DRIVERS is not set
# CONFIG_LAPBETHER is not set
CONFIG_X25_ASY=m
CONFIG_SBNI=m
# CONFIG_SBNI_MULTILINE is not set
CONFIG_ATM_DRIVERS=y
CONFIG_ATM_DUMMY=y
CONFIG_ATM_TCP=m
CONFIG_ATM_LANAI=m
# CONFIG_ATM_ENI is not set
# CONFIG_ATM_FIRESTREAM is not set
CONFIG_ATM_ZATM=m
# CONFIG_ATM_ZATM_DEBUG is not set
CONFIG_ATM_IDT77252=m
# CONFIG_ATM_IDT77252_DEBUG is not set
# CONFIG_ATM_IDT77252_RCV_ALL is not set
CONFIG_ATM_IDT77252_USE_SUNI=y
CONFIG_ATM_AMBASSADOR=y
CONFIG_ATM_AMBASSADOR_DEBUG=y
CONFIG_ATM_HORIZON=m
CONFIG_ATM_HORIZON_DEBUG=y
CONFIG_ATM_FORE200E_MAYBE=y
CONFIG_ATM_FORE200E_PCA=y
CONFIG_ATM_FORE200E_PCA_DEFAULT_FW=y
CONFIG_ATM_FORE200E_USE_TASKLET=y
CONFIG_ATM_FORE200E_TX_RETRY=16
CONFIG_ATM_FORE200E_DEBUG=0
CONFIG_ATM_FORE200E=y
# CONFIG_ATM_HE is not set
CONFIG_FDDI=y
CONFIG_DEFXX=m
CONFIG_DEFXX_MMIO=y
# CONFIG_SKFP is not set
CONFIG_HIPPI=y
CONFIG_ROADRUNNER=m
# CONFIG_ROADRUNNER_LARGE_RINGS is not set
CONFIG_PLIP=m
CONFIG_PPP=y
CONFIG_PPP_MULTILINK=y
# CONFIG_PPP_FILTER is not set
CONFIG_PPP_ASYNC=m
# CONFIG_PPP_SYNC_TTY is not set
CONFIG_PPP_DEFLATE=y
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_MPPE=y
CONFIG_PPPOE=m
CONFIG_PPPOATM=y
CONFIG_PPPOL2TP=m
CONFIG_SLIP=y
# CONFIG_SLIP_COMPRESSED is not set
CONFIG_SLHC=y
# CONFIG_SLIP_SMART is not set
# CONFIG_SLIP_MODE_SLIP6 is not set
# CONFIG_NET_FC is not set
CONFIG_NETCONSOLE=y
# CONFIG_NETCONSOLE_DYNAMIC is not set
CONFIG_NETPOLL=y
# CONFIG_NETPOLL_TRAP is not set
CONFIG_NET_POLL_CONTROLLER=y
# CONFIG_VIRTIO_NET is not set
CONFIG_ISDN=m
# CONFIG_ISDN_I4L is not set
CONFIG_ISDN_CAPI=m
CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON=y
CONFIG_CAPI_TRACE=y
CONFIG_ISDN_CAPI_MIDDLEWARE=y
# CONFIG_ISDN_CAPI_CAPI20 is not set
#
# CAPI hardware drivers
#
# CONFIG_CAPI_AVM is not set
CONFIG_CAPI_EICON=y
# CONFIG_ISDN_DIVAS is not set
CONFIG_PHONE=y
CONFIG_PHONE_IXJ=m
# CONFIG_PHONE_IXJ_PCMCIA is not set
#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
CONFIG_INPUT_POLLDEV=y
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=y
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
CONFIG_KEYBOARD_LKKBD=m
CONFIG_KEYBOARD_XTKBD=m
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_KEYBOARD_STOWAWAY=y
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_SERIAL=m
CONFIG_MOUSE_APPLETOUCH=y
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
CONFIG_INPUT_TABLET=y
CONFIG_TABLET_USB_ACECAD=y
CONFIG_TABLET_USB_AIPTEK=y
# CONFIG_TABLET_USB_GTCO is not set
# CONFIG_TABLET_USB_KBTAB is not set
# CONFIG_TABLET_USB_WACOM is not set
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_ADS7846=y
CONFIG_TOUCHSCREEN_FUJITSU=m
CONFIG_TOUCHSCREEN_GUNZE=y
# CONFIG_TOUCHSCREEN_ELO is not set
CONFIG_TOUCHSCREEN_MTOUCH=y
CONFIG_TOUCHSCREEN_MK712=m
# CONFIG_TOUCHSCREEN_PENMOUNT is not set
CONFIG_TOUCHSCREEN_TOUCHRIGHT=y
CONFIG_TOUCHSCREEN_TOUCHWIN=y
CONFIG_TOUCHSCREEN_UCB1400=y
CONFIG_TOUCHSCREEN_USB_COMPOSITE=m
CONFIG_TOUCHSCREEN_USB_EGALAX=y
CONFIG_TOUCHSCREEN_USB_PANJIT=y
CONFIG_TOUCHSCREEN_USB_3M=y
CONFIG_TOUCHSCREEN_USB_ITM=y
CONFIG_TOUCHSCREEN_USB_ETURBO=y
CONFIG_TOUCHSCREEN_USB_GUNZE=y
CONFIG_TOUCHSCREEN_USB_DMC_TSC10=y
CONFIG_TOUCHSCREEN_USB_IRTOUCH=y
CONFIG_TOUCHSCREEN_USB_IDEALTEK=y
CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=y
CONFIG_TOUCHSCREEN_USB_GOTOP=y
# CONFIG_INPUT_MISC is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
CONFIG_SERIO_PARKBD=m
CONFIG_SERIO_PCIPS2=m
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
CONFIG_GAMEPORT=m
CONFIG_GAMEPORT_NS558=m
CONFIG_GAMEPORT_L4=m
# CONFIG_GAMEPORT_EMU10K1 is not set
# CONFIG_GAMEPORT_FM801 is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_COMPUTONE is not set
CONFIG_ROCKETPORT=m
# CONFIG_CYCLADES is not set
# CONFIG_DIGIEPCA is not set
# CONFIG_MOXA_INTELLIO is not set
CONFIG_MOXA_SMARTIO=y
CONFIG_ISI=m
# CONFIG_SYNCLINK is not set
CONFIG_SYNCLINKMP=m
CONFIG_SYNCLINK_GT=y
CONFIG_N_HDLC=m
# CONFIG_RISCOM8 is not set
CONFIG_SPECIALIX=m
CONFIG_SPECIALIX_RTSCTS=y
# CONFIG_SX is not set
# CONFIG_RIO is not set
CONFIG_STALDRV=y
# CONFIG_STALLION is not set
# CONFIG_ISTALLION is not set
CONFIG_NOZOMI=m
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_CS=y
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
# CONFIG_SERIAL_8250_MANY_PORTS is not set
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_8250_DETECT_IRQ=y
CONFIG_SERIAL_8250_RSA=y
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_JSM=y
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_PRINTER is not set
CONFIG_PPDEV=m
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=m
CONFIG_HW_RANDOM_INTEL=m
# CONFIG_HW_RANDOM_AMD is not set
# CONFIG_NVRAM is not set
CONFIG_RTC=y
CONFIG_R3964=m
CONFIG_APPLICOM=y
#
# PCMCIA character devices
#
CONFIG_SYNCLINK_CS=m
CONFIG_CARDMAN_4000=y
# CONFIG_CARDMAN_4040 is not set
CONFIG_IPWIRELESS=y
CONFIG_MWAVE=y
# CONFIG_PC8736x_GPIO is not set
CONFIG_RAW_DRIVER=y
CONFIG_MAX_RAW_DEVS=256
# CONFIG_HPET is not set
# CONFIG_HANGCHECK_TIMER is not set
CONFIG_TCG_TPM=m
CONFIG_TCG_TIS=m
CONFIG_TCG_NSC=m
CONFIG_TCG_ATMEL=m
CONFIG_TCG_INFINEON=m
CONFIG_TELCLOCK=m
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=m
#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=y
# CONFIG_I2C_ALGOPCF is not set
CONFIG_I2C_ALGOPCA=y
#
# I2C Hardware Bus support
#
CONFIG_I2C_ALI1535=y
CONFIG_I2C_ALI1563=y
CONFIG_I2C_ALI15X3=m
CONFIG_I2C_AMD756=y
CONFIG_I2C_AMD756_S4882=y
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
CONFIG_I2C_I810=y
CONFIG_I2C_PIIX4=y
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PARPORT is not set
CONFIG_I2C_PARPORT_LIGHT=m
CONFIG_I2C_PROSAVAGE=y
CONFIG_I2C_SAVAGE4=m
CONFIG_I2C_SIMTEC=m
CONFIG_I2C_SIS5595=y
# CONFIG_I2C_SIS630 is not set
CONFIG_I2C_SIS96X=m
CONFIG_I2C_TAOS_EVM=m
CONFIG_I2C_STUB=m
# CONFIG_I2C_TINY_USB is not set
CONFIG_I2C_VIA=m
CONFIG_I2C_VIAPRO=y
# CONFIG_I2C_VOODOO3 is not set
#
# Miscellaneous I2C Chip support
#
CONFIG_DS1682=y
CONFIG_SENSORS_EEPROM=m
CONFIG_SENSORS_PCF8574=m
CONFIG_PCF8575=m
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_TPS65010 is not set
CONFIG_SENSORS_MAX6875=y
CONFIG_SENSORS_TSL2550=y
CONFIG_I2C_DEBUG_CORE=y
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
#
# SPI support
#
CONFIG_SPI=y
CONFIG_SPI_MASTER=y
#
# SPI Master Controller Drivers
#
CONFIG_SPI_BITBANG=m
CONFIG_SPI_BUTTERFLY=m
# CONFIG_SPI_LM70_LLP is not set
#
# SPI Protocol Masters
#
# CONFIG_SPI_AT25 is not set
CONFIG_SPI_SPIDEV=m
CONFIG_SPI_TLE62X0=y
CONFIG_W1=m
#
# 1-wire Bus Masters
#
# CONFIG_W1_MASTER_MATROX is not set
CONFIG_W1_MASTER_DS2490=m
# CONFIG_W1_MASTER_DS2482 is not set
#
# 1-wire Slaves
#
# CONFIG_W1_SLAVE_THERM is not set
CONFIG_W1_SLAVE_SMEM=m
# CONFIG_W1_SLAVE_DS2433 is not set
# CONFIG_W1_SLAVE_DS2760 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_NOWAYOUT=y
#
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not set
CONFIG_ACQUIRE_WDT=m
CONFIG_ADVANTECH_WDT=y
CONFIG_ALIM1535_WDT=m
CONFIG_ALIM7101_WDT=y
CONFIG_SC520_WDT=y
# CONFIG_EUROTECH_WDT is not set
CONFIG_IB700_WDT=y
CONFIG_IBMASR=m
# CONFIG_WAFER_WDT is not set
CONFIG_I6300ESB_WDT=y
# CONFIG_ITCO_WDT is not set
# CONFIG_IT8712F_WDT is not set
CONFIG_SC1200_WDT=m
# CONFIG_PC87413_WDT is not set
CONFIG_60XX_WDT=y
CONFIG_SBC8360_WDT=y
CONFIG_CPU5_WDT=y
# CONFIG_SMSC37B787_WDT is not set
CONFIG_W83627HF_WDT=m
CONFIG_W83697HF_WDT=y
# CONFIG_W83877F_WDT is not set
CONFIG_W83977F_WDT=m
CONFIG_MACHZ_WDT=y
CONFIG_SBC_EPX_C3_WATCHDOG=y
#
# PCI-based Watchdog Cards
#
CONFIG_PCIPCWATCHDOG=y
# CONFIG_WDTPCI is not set
#
# USB-based Watchdog Cards
#
CONFIG_USBPCWATCHDOG=y
#
# Sonics Silicon Backplane
#
CONFIG_SSB_POSSIBLE=y
CONFIG_SSB=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
# CONFIG_SSB_PCIHOST is not set
CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
# CONFIG_SSB_PCMCIAHOST is not set
# CONFIG_SSB_DEBUG is not set
#
# Multifunction device drivers
#
CONFIG_MFD_SM501=m
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
CONFIG_DVB_CORE=m
CONFIG_DVB_CORE_ATTACH=y
# CONFIG_DVB_CAPTURE_DRIVERS is not set
CONFIG_DAB=y
CONFIG_USB_DABUSB=m
#
# Graphics support
#
CONFIG_AGP=y
CONFIG_AGP_AMD64=y
CONFIG_AGP_INTEL=y
CONFIG_AGP_SIS=y
CONFIG_AGP_VIA=m
# CONFIG_DRM is not set
CONFIG_VGASTATE=y
CONFIG_VIDEO_OUTPUT_CONTROL=y
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
CONFIG_FB_DDC=m
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_SYS_FOPS is not set
CONFIG_FB_DEFERRED_IO=y
CONFIG_FB_SVGALIB=y
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
CONFIG_FB_PM2=m
# CONFIG_FB_PM2_FIFO_DISCONNECT is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_VESA is not set
CONFIG_FB_EFI=y
CONFIG_FB_IMAC=y
# CONFIG_FB_HECUBA is not set
# CONFIG_FB_HGA is not set
CONFIG_FB_S1D13XXX=m
# CONFIG_FB_NVIDIA is not set
CONFIG_FB_RIVA=m
CONFIG_FB_RIVA_I2C=y
CONFIG_FB_RIVA_DEBUG=y
# CONFIG_FB_RIVA_BACKLIGHT is not set
CONFIG_FB_LE80578=m
# CONFIG_FB_CARILLO_RANCH is not set
# CONFIG_FB_INTEL is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
CONFIG_FB_S3=y
# CONFIG_FB_SAVAGE is not set
CONFIG_FB_SIS=y
# CONFIG_FB_SIS_300 is not set
CONFIG_FB_SIS_315=y
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
CONFIG_FB_VOODOO1=m
CONFIG_FB_VT8623=y
CONFIG_FB_TRIDENT=m
CONFIG_FB_TRIDENT_ACCEL=y
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
CONFIG_FB_GEODE=y
# CONFIG_FB_GEODE_LX is not set
# CONFIG_FB_GEODE_GX is not set
# CONFIG_FB_GEODE_GX1 is not set
# CONFIG_FB_SM501 is not set
# CONFIG_FB_VIRTUAL is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
# CONFIG_LCD_CLASS_DEVICE is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_CORGI=y
CONFIG_BACKLIGHT_PROGEAR=y
#
# Display device support
#
CONFIG_DISPLAY_SUPPORT=m
#
# Display hardware drivers
#
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_VGACON_SOFT_SCROLLBACK is not set
# CONFIG_VIDEO_SELECT is not set
CONFIG_DUMMY_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE is not set
CONFIG_FONT_8x16=y
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
#
# Sound
#
CONFIG_SOUND=y
#
# Advanced Linux Sound Architecture
#
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_HWDEP=y
CONFIG_SND_RAWMIDI=y
CONFIG_SND_SEQUENCER=y
# CONFIG_SND_SEQ_DUMMY is not set
CONFIG_SND_OSSEMUL=y
# CONFIG_SND_MIXER_OSS is not set
CONFIG_SND_PCM_OSS=m
# CONFIG_SND_PCM_OSS_PLUGINS is not set
CONFIG_SND_SEQUENCER_OSS=y
# CONFIG_SND_RTCTIMER is not set
# CONFIG_SND_DYNAMIC_MINORS is not set
# CONFIG_SND_SUPPORT_OLD_API is not set
# CONFIG_SND_VERBOSE_PROCFS is not set
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
#
# Generic devices
#
CONFIG_SND_MPU401_UART=y
CONFIG_SND_OPL3_LIB=y
CONFIG_SND_VX_LIB=y
CONFIG_SND_AC97_CODEC=y
CONFIG_SND_DUMMY=m
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
CONFIG_SND_MTS64=m
CONFIG_SND_SERIAL_U16550=y
CONFIG_SND_MPU401=m
# CONFIG_SND_PORTMAN2X4 is not set
#
# PCI devices
#
# CONFIG_SND_AD1889 is not set
CONFIG_SND_ALS300=m
# CONFIG_SND_ALS4000 is not set
CONFIG_SND_ALI5451=y
CONFIG_SND_ATIIXP=y
CONFIG_SND_ATIIXP_MODEM=m
CONFIG_SND_AU8810=m
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
CONFIG_SND_AZT3328=m
# CONFIG_SND_BT87X is not set
CONFIG_SND_CA0106=y
# CONFIG_SND_CMIPCI is not set
CONFIG_SND_OXYGEN_LIB=y
# CONFIG_SND_OXYGEN is not set
# CONFIG_SND_CS4281 is not set
CONFIG_SND_CS46XX=y
# CONFIG_SND_CS46XX_NEW_DSP is not set
# CONFIG_SND_CS5530 is not set
CONFIG_SND_DARLA20=y
CONFIG_SND_GINA20=m
CONFIG_SND_LAYLA20=m
CONFIG_SND_DARLA24=y
CONFIG_SND_GINA24=y
CONFIG_SND_LAYLA24=y
CONFIG_SND_MONA=m
CONFIG_SND_MIA=m
# CONFIG_SND_ECHO3G is not set
CONFIG_SND_INDIGO=y
CONFIG_SND_INDIGOIO=m
CONFIG_SND_INDIGODJ=y
CONFIG_SND_EMU10K1=y
CONFIG_SND_EMU10K1X=m
CONFIG_SND_ENS1370=m
# CONFIG_SND_ENS1371 is not set
CONFIG_SND_ES1938=m
CONFIG_SND_ES1968=m
CONFIG_SND_FM801=y
# CONFIG_SND_FM801_TEA575X_BOOL is not set
# CONFIG_SND_HDA_INTEL is not set
CONFIG_SND_HDSP=m
CONFIG_SND_HDSPM=y
CONFIG_SND_HIFIER=m
CONFIG_SND_ICE1712=y
CONFIG_SND_ICE1724=y
CONFIG_SND_INTEL8X0=y
# CONFIG_SND_INTEL8X0M is not set
CONFIG_SND_KORG1212=m
CONFIG_SND_KORG1212_FIRMWARE_IN_KERNEL=y
# CONFIG_SND_MAESTRO3 is not set
CONFIG_SND_MIXART=y
CONFIG_SND_NM256=m
CONFIG_SND_PCXHR=m
CONFIG_SND_RIPTIDE=m
CONFIG_SND_RME32=m
CONFIG_SND_RME96=m
CONFIG_SND_RME9652=m
CONFIG_SND_SONICVIBES=y
CONFIG_SND_TRIDENT=m
CONFIG_SND_VIA82XX=y
CONFIG_SND_VIA82XX_MODEM=y
CONFIG_SND_VIRTUOSO=y
CONFIG_SND_VX222=y
CONFIG_SND_YMFPCI=y
CONFIG_SND_YMFPCI_FIRMWARE_IN_KERNEL=y
# CONFIG_SND_AC97_POWER_SAVE is not set
#
# SPI devices
#
#
# USB devices
#
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_USX2Y is not set
CONFIG_SND_USB_CAIAQ=y
CONFIG_SND_USB_CAIAQ_INPUT=y
#
# PCMCIA devices
#
# CONFIG_SND_VXPOCKET is not set
# CONFIG_SND_PDAUDIOCF is not set
#
# System on Chip audio support
#
CONFIG_SND_SOC=y
#
# SoC Audio support for SuperH
#
#
# ALSA SoC audio for Freescale SOCs
#
#
# Open Sound System
#
CONFIG_SOUND_PRIME=y
# CONFIG_SOUND_TRIDENT is not set
CONFIG_SOUND_MSNDCLAS=m
CONFIG_MSNDCLAS_INIT_FILE="/etc/sound/msndinit.bin"
CONFIG_MSNDCLAS_PERM_FILE="/etc/sound/msndperm.bin"
CONFIG_SOUND_MSNDPIN=m
CONFIG_MSNDPIN_INIT_FILE="/etc/sound/pndspini.bin"
CONFIG_MSNDPIN_PERM_FILE="/etc/sound/pndsperm.bin"
# CONFIG_SOUND_OSS is not set
CONFIG_AC97_BUS=y
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
# CONFIG_HIDRAW is not set
#
# USB Input Devices
#
CONFIG_USB_HID=y
CONFIG_USB_HIDINPUT_POWERBOOK=y
# CONFIG_HID_FF is not set
# CONFIG_USB_HIDDEV is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
CONFIG_USB_DEVICE_CLASS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
CONFIG_USB_SUSPEND=y
# CONFIG_USB_PERSIST is not set
# CONFIG_USB_OTG is not set
#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
CONFIG_USB_ISP116X_HCD=m
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_HCD_SSB is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=y
CONFIG_USB_U132_HCD=m
# CONFIG_USB_SL811_HCD is not set
CONFIG_USB_R8A66597_HCD=y
#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
#
# may also be needed; see USB_STORAGE Help for more information
#
# CONFIG_USB_STORAGE is not set
CONFIG_USB_LIBUSUAL=y
#
# USB Imaging devices
#
CONFIG_USB_MDC800=y
CONFIG_USB_MICROTEK=y
# CONFIG_USB_MON is not set
#
# USB port drivers
#
CONFIG_USB_USS720=m
CONFIG_USB_SERIAL=m
CONFIG_USB_EZUSB=y
CONFIG_USB_SERIAL_GENERIC=y
# CONFIG_USB_SERIAL_AIRCABLE is not set
# CONFIG_USB_SERIAL_AIRPRIME is not set
CONFIG_USB_SERIAL_ARK3116=m
# CONFIG_USB_SERIAL_BELKIN is not set
# CONFIG_USB_SERIAL_CH341 is not set
# CONFIG_USB_SERIAL_WHITEHEAT is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
CONFIG_USB_SERIAL_CP2101=m
# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
CONFIG_USB_SERIAL_FUNSOFT=m
CONFIG_USB_SERIAL_VISOR=m
# CONFIG_USB_SERIAL_IPAQ is not set
CONFIG_USB_SERIAL_IR=m
CONFIG_USB_SERIAL_EDGEPORT=m
CONFIG_USB_SERIAL_EDGEPORT_TI=m
CONFIG_USB_SERIAL_GARMIN=m
# CONFIG_USB_SERIAL_IPW is not set
CONFIG_USB_SERIAL_IUU=m
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
# CONFIG_USB_SERIAL_KEYSPAN is not set
# CONFIG_USB_SERIAL_KLSI is not set
# CONFIG_USB_SERIAL_KOBIL_SCT is not set
# CONFIG_USB_SERIAL_MCT_U232 is not set
CONFIG_USB_SERIAL_MOS7720=m
CONFIG_USB_SERIAL_MOS7840=m
# CONFIG_USB_SERIAL_NAVMAN is not set
CONFIG_USB_SERIAL_PL2303=m
CONFIG_USB_SERIAL_OTI6858=m
# CONFIG_USB_SERIAL_HP4X is not set
CONFIG_USB_SERIAL_SAFE=m
# CONFIG_USB_SERIAL_SAFE_PADDED is not set
CONFIG_USB_SERIAL_SIERRAWIRELESS=m
# CONFIG_USB_SERIAL_TI is not set
CONFIG_USB_SERIAL_CYBERJACK=m
CONFIG_USB_SERIAL_XIRCOM=m
# CONFIG_USB_SERIAL_OPTION is not set
# CONFIG_USB_SERIAL_OMNINET is not set
CONFIG_USB_SERIAL_DEBUG=m
#
# USB Miscellaneous drivers
#
CONFIG_USB_EMI62=m
CONFIG_USB_EMI26=y
CONFIG_USB_ADUTUX=y
CONFIG_USB_AUERSWALD=y
CONFIG_USB_RIO500=m
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
CONFIG_USB_BERRY_CHARGE=m
# CONFIG_USB_LED is not set
CONFIG_USB_CYPRESS_CY7C63=m
CONFIG_USB_CYTHERM=m
# CONFIG_USB_PHIDGET is not set
CONFIG_USB_IDMOUSE=y
CONFIG_USB_FTDI_ELAN=y
# CONFIG_USB_APPLEDISPLAY is not set
CONFIG_USB_SISUSBVGA=m
CONFIG_USB_SISUSBVGA_CON=y
CONFIG_USB_LD=m
CONFIG_USB_TRANCEVIBRATOR=y
CONFIG_USB_IOWARRIOR=m
CONFIG_USB_TEST=m
CONFIG_USB_ATM=y
CONFIG_USB_SPEEDTOUCH=m
# CONFIG_USB_CXACRU is not set
CONFIG_USB_UEAGLEATM=y
# CONFIG_USB_XUSBATM is not set
CONFIG_USB_GADGET=m
CONFIG_USB_GADGET_DEBUG_FILES=y
CONFIG_USB_GADGET_DEBUG_FS=y
CONFIG_USB_GADGET_SELECTED=y
# CONFIG_USB_GADGET_AMD5536UDC is not set
# CONFIG_USB_GADGET_ATMEL_USBA is not set
# CONFIG_USB_GADGET_FSL_USB2 is not set
# CONFIG_USB_GADGET_NET2280 is not set
# CONFIG_USB_GADGET_PXA2XX is not set
CONFIG_USB_GADGET_M66592=y
CONFIG_USB_M66592=m
# CONFIG_USB_GADGET_GOKU is not set
# CONFIG_USB_GADGET_LH7A40X is not set
# CONFIG_USB_GADGET_OMAP is not set
# CONFIG_USB_GADGET_S3C2410 is not set
# CONFIG_USB_GADGET_AT91 is not set
# CONFIG_USB_GADGET_DUMMY_HCD is not set
CONFIG_USB_GADGET_DUALSPEED=y
# CONFIG_USB_ZERO is not set
# CONFIG_USB_ETH is not set
# CONFIG_USB_GADGETFS is not set
CONFIG_USB_FILE_STORAGE=m
CONFIG_USB_FILE_STORAGE_TEST=y
CONFIG_USB_G_SERIAL=m
CONFIG_USB_MIDI_GADGET=m
# CONFIG_USB_G_PRINTER is not set
CONFIG_MMC=m
# CONFIG_MMC_DEBUG is not set
# CONFIG_MMC_UNSAFE_RESUME is not set
#
# MMC/SD Card Drivers
#
# CONFIG_MMC_BLOCK is not set
# CONFIG_SDIO_UART is not set
#
# MMC/SD Host Controller Drivers
#
# CONFIG_MMC_SDHCI is not set
CONFIG_MMC_WBSD=m
CONFIG_MMC_TIFM_SD=m
CONFIG_MMC_SPI=m
# CONFIG_NEW_LEDS is not set
# CONFIG_INFINIBAND is not set
CONFIG_EDAC=y
#
# Reporting subsystems
#
# CONFIG_EDAC_DEBUG is not set
CONFIG_EDAC_MM_EDAC=m
CONFIG_EDAC_E752X=m
CONFIG_EDAC_I82975X=m
CONFIG_EDAC_I3000=m
CONFIG_EDAC_I5000=m
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
#
# Userspace I/O
#
CONFIG_UIO=y
CONFIG_UIO_CIF=y
#
# Firmware Drivers
#
CONFIG_EDD=y
# CONFIG_EFI_VARS is not set
CONFIG_DELL_RBU=m
# CONFIG_DCDBAS is not set
# CONFIG_DMIID is not set
#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y
CONFIG_JBD_DEBUG=y
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
# CONFIG_REISERFS_FS_XATTR is not set
CONFIG_JFS_FS=m
CONFIG_JFS_POSIX_ACL=y
# CONFIG_JFS_SECURITY is not set
# CONFIG_JFS_DEBUG is not set
CONFIG_JFS_STATISTICS=y
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=m
CONFIG_XFS_QUOTA=y
# CONFIG_XFS_SECURITY is not set
CONFIG_XFS_POSIX_ACL=y
# CONFIG_XFS_RT is not set
CONFIG_GFS2_FS=m
# CONFIG_GFS2_FS_LOCKING_NOLOCK is not set
CONFIG_GFS2_FS_LOCKING_DLM=m
CONFIG_OCFS2_FS=y
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_DEBUG_FS is not set
# CONFIG_DNOTIFY is not set
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
CONFIG_QUOTACTL=y
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=m
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
# CONFIG_JOLIET is not set
CONFIG_ZISOFS=y
# CONFIG_UDF_FS is not set
#
# DOS/FAT/NT Filesystems
#
# CONFIG_MSDOS_FS is not set
# CONFIG_VFAT_FS is not set
CONFIG_NTFS_FS=y
# CONFIG_NTFS_DEBUG is not set
CONFIG_NTFS_RW=y
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
# CONFIG_PROC_VMCORE is not set
CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_CONFIGFS_FS=y
#
# Miscellaneous filesystems
#
CONFIG_ADFS_FS=m
CONFIG_ADFS_FS_RW=y
CONFIG_AFFS_FS=y
CONFIG_ECRYPT_FS=y
CONFIG_HFS_FS=m
CONFIG_HFSPLUS_FS=m
CONFIG_BEFS_FS=y
# CONFIG_BEFS_DEBUG is not set
CONFIG_BFS_FS=m
# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=m
# CONFIG_VXFS_FS is not set
CONFIG_MINIX_FS=m
CONFIG_HPFS_FS=m
# CONFIG_QNX4FS_FS is not set
CONFIG_ROMFS_FS=y
CONFIG_SYSV_FS=m
CONFIG_UFS_FS=y
CONFIG_UFS_FS_WRITE=y
# CONFIG_UFS_DEBUG is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
CONFIG_NFS_V4=y
# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=m
CONFIG_NFSD_V2_ACL=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V3_ACL=y
# CONFIG_NFSD_V4 is not set
CONFIG_NFSD_TCP=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_NFS_ACL_SUPPORT=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
# CONFIG_SUNRPC_BIND34 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
CONFIG_NCP_FS=y
CONFIG_NCPFS_PACKET_SIGNING=y
CONFIG_NCPFS_IOCTL_LOCKING=y
# CONFIG_NCPFS_STRONG is not set
CONFIG_NCPFS_NFS_NS=y
CONFIG_NCPFS_OS2_NS=y
CONFIG_NCPFS_SMALLDOS=y
# CONFIG_NCPFS_NLS is not set
# CONFIG_NCPFS_EXTRAS is not set
# CONFIG_CODA_FS is not set
CONFIG_AFS_FS=m
CONFIG_AFS_DEBUG=y
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
CONFIG_ACORN_PARTITION=y
CONFIG_ACORN_PARTITION_CUMANA=y
CONFIG_ACORN_PARTITION_EESOX=y
# CONFIG_ACORN_PARTITION_ICS is not set
# CONFIG_ACORN_PARTITION_ADFS is not set
CONFIG_ACORN_PARTITION_POWERTEC=y
# CONFIG_ACORN_PARTITION_RISCIX is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
CONFIG_ATARI_PARTITION=y
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
CONFIG_ULTRIX_PARTITION=y
CONFIG_SUN_PARTITION=y
CONFIG_KARMA_PARTITION=y
# CONFIG_EFI_PARTITION is not set
CONFIG_SYSV68_PARTITION=y
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_CODEPAGE_437 is not set
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=y
CONFIG_NLS_CODEPAGE_850=y
CONFIG_NLS_CODEPAGE_852=y
CONFIG_NLS_CODEPAGE_855=y
CONFIG_NLS_CODEPAGE_857=y
CONFIG_NLS_CODEPAGE_860=y
CONFIG_NLS_CODEPAGE_861=m
# CONFIG_NLS_CODEPAGE_862 is not set
CONFIG_NLS_CODEPAGE_863=m
CONFIG_NLS_CODEPAGE_864=y
# CONFIG_NLS_CODEPAGE_865 is not set
CONFIG_NLS_CODEPAGE_866=y
CONFIG_NLS_CODEPAGE_869=m
# CONFIG_NLS_CODEPAGE_936 is not set
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=y
CONFIG_NLS_CODEPAGE_949=m
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
CONFIG_NLS_CODEPAGE_1250=y
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
# CONFIG_NLS_ISO8859_1 is not set
# CONFIG_NLS_ISO8859_2 is not set
CONFIG_NLS_ISO8859_3=y
# CONFIG_NLS_ISO8859_4 is not set
CONFIG_NLS_ISO8859_5=y
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=y
# CONFIG_NLS_ISO8859_9 is not set
CONFIG_NLS_ISO8859_13=y
CONFIG_NLS_ISO8859_14=y
# CONFIG_NLS_ISO8859_15 is not set
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=y
CONFIG_NLS_UTF8=m
CONFIG_DLM=m
CONFIG_DLM_DEBUG=y
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_UNUSED_SYMBOLS=y
CONFIG_DEBUG_FS=y
CONFIG_HEADERS_CHECK=y
# CONFIG_DEBUG_KERNEL is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_LATENCYTOP is not set
CONFIG_PROVIDE_OHCI1394_DMA_INIT=y
CONFIG_SAMPLES=y
# CONFIG_SAMPLE_KOBJECT is not set
CONFIG_EARLY_PRINTK=y
CONFIG_X86_MPPARSE=y
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=0
#
# Security options
#
CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
CONFIG_SECURITY=y
CONFIG_SECURITY_NETWORK=y
CONFIG_SECURITY_NETWORK_XFRM=y
CONFIG_SECURITY_CAPABILITIES=y
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
# CONFIG_SECURITY_ROOTPLUG is not set
CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
CONFIG_XOR_BLOCKS=y
CONFIG_ASYNC_CORE=y
CONFIG_ASYNC_MEMCPY=y
CONFIG_ASYNC_XOR=y
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_SEQIV=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_SHA1=y
# CONFIG_CRYPTO_SHA256 is not set
CONFIG_CRYPTO_SHA512=y
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_TGR192=y
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_PCBC=m
# CONFIG_CRYPTO_LRW is not set
CONFIG_CRYPTO_XTS=m
CONFIG_CRYPTO_CTR=y
# CONFIG_CRYPTO_GCM is not set
CONFIG_CRYPTO_CCM=y
CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_FCRYPT=m
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_TWOFISH_X86_64 is not set
CONFIG_CRYPTO_SERPENT=m
# CONFIG_CRYPTO_AES is not set
# CONFIG_CRYPTO_AES_X86_64 is not set
# CONFIG_CRYPTO_CAST5 is not set
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_TEA=y
CONFIG_CRYPTO_ARC4=y
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_SEED=y
CONFIG_CRYPTO_SALSA20=m
CONFIG_CRYPTO_SALSA20_X86_64=m
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_CAMELLIA=y
# CONFIG_CRYPTO_TEST is not set
CONFIG_CRYPTO_AUTHENC=y
CONFIG_CRYPTO_LZO=m
# CONFIG_CRYPTO_HW is not set
CONFIG_HAVE_KVM=y
CONFIG_VIRTUALIZATION=y
CONFIG_KVM=m
# CONFIG_KVM_INTEL is not set
# CONFIG_KVM_AMD is not set
CONFIG_VIRTIO=m
CONFIG_VIRTIO_RING=m
CONFIG_VIRTIO_PCI=m
CONFIG_VIRTIO_BALLOON=m
#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_CRC_CCITT=m
CONFIG_CRC16=y
CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
CONFIG_CRC7=m
CONFIG_LIBCRC32C=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=m
CONFIG_LZO_DECOMPRESS=m
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=y
CONFIG_TEXTSEARCH_BM=y
CONFIG_TEXTSEARCH_FSM=y
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
[-- Attachment #3: Type: text/plain, Size: 0 bytes --]
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [GIT PATCH] ACPI patches for 2.6.25-rc0
[not found] ` <20080209083143.GA9634@elte.hu>
@ 2008-02-09 9:04 ` Len Brown
0 siblings, 0 replies; 6+ messages in thread
From: Len Brown @ 2008-02-09 9:04 UTC (permalink / raw)
To: Ingo Molnar
Cc: Thomas Sujith, linux-kernel, linux-acpi, linux-pm, Andrew Morton,
Linus Torvalds
On Saturday 09 February 2008 03:31, Ingo Molnar wrote:
>
> * Ingo Molnar <mingo@elte.hu> wrote:
>
> > that fixed the build failure on 32-bit, but there's another one i just
> > hit on 64-bit x86:
> >
> > drivers/built-in.o: In function `acpi_video_bus_put_devices':
> > video.c:(.text+0x5540d): undefined reference to `thermal_cooling_device_unregister'
> > drivers/built-in.o: In function `acpi_video_bus_add':
> > video.c:(.text+0x56994): undefined reference to `thermal_cooling_device_register'
> >
> > which is due to:
> >
> > commit 702ed512de9c8a67a69a981c73b7337c2131f198
> > Date: Thu Jan 17 15:51:22 2008 +0800
> >
> > ACPI: register ACPI Video LCD as generic thermal cooling device
> >
> > the commit couldnt be reverted cleanly, i've done a manual fixup of
> > the revert (find the patch below).
>
> (config for that build breakage attached, in case you were wondering
> about how to trigger it.)
>From a0dd25b2c83de4623487ca4de9c1d962b552ca0f Mon Sep 17 00:00:00 2001
From: Len Brown <len.brown@intel.com>
Date: Sat, 9 Feb 2008 04:01:48 -0500
Subject: [PATCH] ACPI: thermal: buildfix for CONFIG_THERMAL=n
Organization: Intel Open Source Technology Center
This fixes the build, but acpi_fan_add() still needs
to be updated to handle thermal_cooling_device_register()
returning NULL as a non-fatal condition.
Signed-off-by: Len Brown <len.brown@intel.com>
---
include/linux/thermal.h | 23 ++++++++++++++++++++---
1 files changed, 20 insertions(+), 3 deletions(-)
diff --git a/include/linux/thermal.h b/include/linux/thermal.h
index bba7712..818ca1c 100644
--- a/include/linux/thermal.h
+++ b/include/linux/thermal.h
@@ -79,7 +79,9 @@ struct thermal_zone_device {
};
struct thermal_zone_device *thermal_zone_device_register(char *, int, void *,
- struct thermal_zone_device_ops *);
+ struct
+ thermal_zone_device_ops
+ *);
void thermal_zone_device_unregister(struct thermal_zone_device *);
int thermal_zone_bind_cooling_device(struct thermal_zone_device *, int,
@@ -87,8 +89,23 @@ int thermal_zone_bind_cooling_device(struct thermal_zone_device *, int,
int thermal_zone_unbind_cooling_device(struct thermal_zone_device *, int,
struct thermal_cooling_device *);
+#ifdef CONFIG_THERMAL
struct thermal_cooling_device *thermal_cooling_device_register(char *, void *,
- struct thermal_cooling_device_ops *);
+ struct
+ thermal_cooling_device_ops
+ *);
void thermal_cooling_device_unregister(struct thermal_cooling_device *);
+#else
+static inline struct thermal_cooling_device
+*thermal_cooling_device_register(char *c, void *v,
+ struct thermal_cooling_device_ops *t)
+{
+ return NULL;
+}
+static inline
+ void thermal_cooling_device_unregister(struct thermal_cooling_device *t)
+{
+};
+#endif
-#endif /* __THERMAL_H__ */
+#endif /* __THERMAL_H__ */
--
1.5.4.34.g053d9
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [GIT PATCH] ACPI patches for 2.6.25-rc0
@ 2008-02-07 9:50 Len Brown
0 siblings, 0 replies; 6+ messages in thread
From: Len Brown @ 2008-02-07 9:50 UTC (permalink / raw)
To: Linus Torvalds; +Cc: linux-acpi, Andrew Morton, linux-kernel, linux-pm
Hi Linus,
please pull from:
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6.git release
Hmmm, where to begin...
The standard platform specific driver updates, thinkpad, sony, asus
Thermal extensions to support Intel's new Menlo platform.
INITRAMFS DSDT override, a patch I resisted for years, but finally was convinced.
/sys/firmware/acpi/interrupts/ to see where your ACPI interrutps come from...
Initial WMI support -- Windows can run, but it can't hide...
video/brightness continues to mature...
cpuidle is now default enabled on ACPI configs
a bunch of bug fixes
This will update the files shown below.
thanks!
-Len
ps. individual patches are available on linux-acpi@vger.kernel.org
and a consolidated plain patch is available here:
ftp://ftp.kernel.org/pub/linux/kernel/people/lenb/acpi/patches/release/2.6.24/acpi-release-20070126-2.6.24.diff.gz
Documentation/00-INDEX | 3
Documentation/ABI/testing/sysfs-firmware-acpi | 99
Documentation/acpi/dsdt-override.txt | 15
Documentation/acpi/initramfs-add-dsdt.sh | 43
Documentation/acpi/method-tracing.txt | 26
Documentation/kernel-parameters.txt | 9
Documentation/power/swsusp.txt | 5
Documentation/thermal/sysfs-api.txt | 246 +
Documentation/thinkpad-acpi.txt | 116
MAINTAINERS | 19
arch/ia64/kernel/acpi-processor.c | 6
arch/ia64/kernel/acpi.c | 32
arch/x86/Kconfig | 3
arch/x86/kernel/acpi/boot.c | 47
arch/x86/kernel/acpi/processor.c | 6
arch/x86/kernel/cpu/cpufreq/speedstep-lib.c | 5
arch/x86/kernel/srat_32.c | 2
drivers/Kconfig | 2
drivers/Makefile | 1
drivers/acpi/Kconfig | 40
drivers/acpi/Makefile | 1
drivers/acpi/asus_acpi.c | 55
drivers/acpi/battery.c | 5
drivers/acpi/bay.c | 10
drivers/acpi/blacklist.c | 58
drivers/acpi/bus.c | 26
drivers/acpi/debug.c | 57
drivers/acpi/dispatcher/dsopcode.c | 4
drivers/acpi/dock.c | 14
drivers/acpi/ec.c | 19
drivers/acpi/event.c | 28
drivers/acpi/events/evevent.c | 2
drivers/acpi/events/evgpe.c | 27
drivers/acpi/fan.c | 92
drivers/acpi/glue.c | 4
drivers/acpi/hardware/hwsleep.c | 2
drivers/acpi/namespace/nsxfeval.c | 10
drivers/acpi/numa.c | 3
drivers/acpi/osl.c | 372 +
drivers/acpi/pci_bind.c | 4
drivers/acpi/pci_irq.c | 7
drivers/acpi/pci_link.c | 2
drivers/acpi/power.c | 6
drivers/acpi/processor_core.c | 42
drivers/acpi/processor_idle.c | 47
drivers/acpi/processor_perflib.c | 16
drivers/acpi/processor_thermal.c | 134
drivers/acpi/processor_throttling.c | 346 +
drivers/acpi/sbs.c | 2
drivers/acpi/sbshc.c | 4
drivers/acpi/scan.c | 110
drivers/acpi/sleep/main.c | 17
drivers/acpi/sleep/proc.c | 46
drivers/acpi/system.c | 208
drivers/acpi/tables/Makefile | 2
drivers/acpi/tables/tbxfroot.c | 4
drivers/acpi/thermal.c | 663 ++
drivers/acpi/utilities/utglobal.c | 2
drivers/acpi/video.c | 262 -
drivers/acpi/wmi.c | 710 +++
drivers/cpuidle/Kconfig | 4
drivers/cpuidle/cpuidle.c | 41
drivers/firmware/dmi_scan.c | 9
drivers/misc/Kconfig | 53
drivers/misc/Makefile | 3
drivers/misc/acer-wmi.c | 1109 ++++
drivers/misc/asus-laptop.c | 26
drivers/misc/intel_menlow.c | 526 ++
drivers/misc/sony-laptop.c | 445 +
drivers/misc/tc1100-wmi.c | 290 +
drivers/misc/thinkpad_acpi.c | 3256 +++++++++-----
drivers/misc/thinkpad_acpi.h | 606 --
drivers/pnp/pnpacpi/core.c | 2
drivers/power/power_supply_sysfs.c | 1
drivers/thermal/Kconfig | 15
drivers/thermal/Makefile | 5
drivers/thermal/thermal.c | 714 +++
include/acpi/acglobal.h | 4
include/acpi/acmacros.h | 6
include/acpi/acpi_bus.h | 5
include/acpi/acpi_drivers.h | 2
include/acpi/acpi_numa.h | 1
include/acpi/acpiosxf.h | 7
include/acpi/processor.h | 13
include/linux/acpi.h | 62
include/linux/cpuidle.h | 13
include/linux/dmi.h | 2
include/linux/kernel.h | 1
include/linux/power_supply.h | 1
include/linux/sonypi.h | 2
include/linux/thermal.h | 94
init/initramfs.c | 8
init/main.c | 7
kernel/panic.c | 5
kernel/power/Kconfig | 9
95 files changed, 9009 insertions(+), 2486 deletions(-)
through these commits:
Adrian Bunk (3):
ACPI: make acpi_dmi_dump() static
ACPI: make struct osi_linux static
ACPI: misc cleanups
Alan Cox (1):
ACPI: its a directory not a folder....
Alexey Starikovskiy (3):
ACPI: Defer enabling of level GPE until all pending notifies done
ACPI: EC: Do the byte access with a fast path
ACPI: EC: Some hardware requires burst mode to operate properly
Andrew Patterson (1):
ACPI: Check for any matching CID when walking namespace.
Carlos Corbacho (3):
ACPI: WMI: Add ACPI-WMI mapping driver
acer-wmi: Add driver for newer Acer laptops
tc1100-wmi: Add driver for HP Compaq TC1100 Tablets
Corentin CHARY (1):
asus-laptop new write_acpi_int
Dave Jones (1):
ACPI: remove P2B-S from blacklist.
Frank Seidel (2):
ACPI: Fix autloading of dock, video, bay and all linux specific HID drivers
ACPI: Add autoload info to dock driver
Henrique de Moraes Holschuh (20):
ACPI: thinkpad-acpi: document keymap gotcha's (v2)
ACPI: thinkpad-acpi: refactor hotkey_get and hotkey_set (v2)
ACPI: thinkpad-acpi: prepare for NVRAM polling support
ACPI: thinkpad-acpi: add CMOS NVRAM polling for hot keys (v9)
ACPI: thinkpad-acpi: bump up version to 0.18
ACPI: thinkpad-acpi: spring cleanup part 1
ACPI: thinkpad-acpi: spring cleanup part 2
ACPI: thinkpad-acpi: spring cleanup part 3
ACPI: thinkpad-acpi: spring cleanup part 4
ACPI: thinkpad-acpi: module glue cleanups
ACPI: thinkpad-acpi: rename IBM in defines
ACPI: thinkpad-acpi: some checkpatch.pl fluff
ACPI: thinkpad-acpi: add suspend handler
ACPI: thinkpad-acpi: cleanup hotkey_notify and HKEY log messages
ACPI: thinkpad-acpi: wakeup on hotunplug reporting
ACPI: thinkpad-acpi: add X61t HKEY events
ACPI: thinkpad-acpi: silence _sta warning
ACPI: thinkpad-acpi: add poll() support to some sysfs attributes
ACPI: thinkpad-acpi: update copyright dates to 2008
ACPI: thinkpad-acpi: bump up version to 0.19
Jan Beulich (1):
acpi: make __acpi_map_table() and __init function
Jean Delvare (1):
ACPI: cleanup acpi.h
Kevin Hilman (1):
cpuidle: build fix for non-x86
Len Brown (17):
ACPI: document method tracing hooks
cpuidle: create processor.latency_factor tunable
cpuidle: default processor.latency_factor=2
ACPI: tables: complete searching upon RSDP w/ bad checksum.
ACPI: throttling: fix build warning
ACPI: fan: build fix for CONFIG_ACPI_PROCFS=n
ACPI: remove redundant Acer blacklist entry
DMI: remove duplicate helper routine
ACPI: update blacklist comments
ACPI: blacklist update
ACPI: create /sys/firmware/acpi/interrupts
ACPICA: fix CONFIG_ACPI_DEBUG_FUNC_TRACE build
ACPI: add missing prink prefix strings
ACPI: update DSDT override documentation
ACPI: update intrd DSDT override console messages
Revert "cpuidle: build fix for non-x86"
ACPI: fix build warning
Luca Tettamanti (1):
asus_acpi: add support for F3Sa
Markus Gaugusch (1):
ACPI: basic initramfs DSDT override support
Matthew Garrett (4):
ACPI: video: Rationalise ACPI backlight implementation
ACPI: video: Ignore devices that aren't present in hardware
ACPI: video: reset brightness on resume
ACPI: video: Ignore ACPI video devices that aren't present in hardware
Matthias Kaehlcke (1):
ACPI: acpi_pci_irq_find_prt_entry(): use list_for_each_entry() instead of list_for_each()
Mattia Dongili (6):
sony-laptop: printk more info in sony_pic_call[123]
sony-laptop: Add Vaio N series to the special init sequence to enable Fn keys
sony-laptop: refactor model types
sony-laptop: bump version to 0.6
sony-laptop: add Type4 model
sony-laptop: fix scancode decode
Miguel Botón (1):
ACPI: remove duplicated warning message
Pavel Machek (1):
PM: documentation cleanups
Rafael J. Wysocki (1):
ACPI: Fix acpi_pm_device_sleep_state()
Roel Kluin (2):
asus-laptop: add parentheses
ACPI: thinkpad-acpi: second TP_EC_FAN_FULLSPEED should be TP_EC_FAN_AUTO
Shaohua Li (1):
pnp: Failed to activate device 00:0a - Samsung P35 XVM 1600 III
Signed-off by Yi Yang (1):
ACPI: detect invalid argument written to /proc/acpi/alarm
Thomas Renninger (4):
ACPI: Also autoload the bay driver, was forgotten...
ACPI: add "processor.ignore_ppc" hook to workaround BIOS _PPC weirdness
ACPI: track opregion names to avoid driver resource conflicts.
ACPI: Export acpi_check_resource_conflict
Thomas Sujith (1):
intel_menlo: introduce new platform specific driver
Yi Yang (1):
ACPI: /proc/acpi/alarm parsing: handle large numbers properly
Zhang Rui (17):
ACPI: add control method tracing support
ACPI: disable stray GPE, prevent ACPI interrupt storm
export thermal notification to userspace when nocrt is set
ACPI: ACPI Exception (): AE_NOT_FOUND, Processor Device is not present
the generic thermal sysfs driver
ACPI: register ACPI thermal zone as generic thermal zone devices
ACPI: ACPI thermal zone handle notification correctly
ACPI: register ACPI Fan as generic thermal cooling device
ACPI: register ACPI Processor as generic thermal cooling device
ACPI: register ACPI Video LCD as generic thermal cooling device
ACPI: attach thermal zone info
ACPI: CELSIUS_TO_KELVIN fixup
ACPI: thermal fixup
ACPI: video: create "brightness_switch_enabled" modparam
ACPI: video: delete unused display switch on hotkey event code
ACPI: create notifier chain to get hotkey events to graphics driver
ACPI: video: call ACPI notifier chain for ACPI video notifications
Zhao Yakui (6):
Revert "speedstep-lib.c: fix frequency multiplier for Pentium4 models 0&1"
ACPI: Set _PSD ACPI_PDC_SMP_T_SWCOORD
ACPI : Check parameter when calling acpi_processor_get/set_throttling
ACPI : Update T-state coordination after getting _TSD info
ACPI : Add T-state event notifier function
ACPI: Update the t-state for every affected cpu when t-state is changed
len.brown@intel.com (1):
ACPI: CONFIG_CPU_IDLE=ACPI by default
maximilian attems (1):
ACPI: battery: add sysfs serial number
venkatesh.pallipadi@intel.com (4):
ACPI: idle: Fix acpi_safe_halt usages and interrupt enabling/disabling
ACPI: enable MWAIT for C1 idle
ACPI: cpuidle: Support C1 idle time accounting
cpuidle: Add a poll_idle method
Éric Piel (2):
ACPI: Taint kernel on ACPI table override (format corrected)
ACPI: Add "acpi_no_initrd_override" kernel parameter
with this log:
commit b7143156c9ceee1a072c57aac8729d2dec5b3bf1
Author: Len Brown <len.brown@intel.com>
Date: Thu Feb 7 04:24:01 2008 -0500
ACPI: fix build warning
drivers/acpi/system.c:360: warning: ignoring return value of ‘sysfs_create_group’, declared with attribute warn_unused_result
Signed-off-by: Len Brown <len.brown@intel.com>
commit 9b7131542178f5f948e4bb6bea6e1c545e697b06
Author: Len Brown <len.brown@intel.com>
Date: Thu Feb 7 04:16:34 2008 -0500
Revert "cpuidle: build fix for non-x86"
This reverts commit f757397097d0713c949af76dccabb65a2785782e.
which ironically broke the ia64 build
commit 81e242d0efafb319938d511b115088a5c4523c91
Merge: a733a5d... 04d9488...
Author: Len Brown <len.brown@intel.com>
Date: Thu Feb 7 04:01:53 2008 -0500
Merge branches 'release' and 'dsdt-override' into release
commit 04d94886b47b5133915021dcfb1108a8576f6ea7
Author: Len Brown <len.brown@intel.com>
Date: Wed Feb 6 19:49:54 2008 -0500
ACPI: update intrd DSDT override console messages
also, address some checkpatch.pl violations
Signed-off-by: Len Brown <len.brown@intel.com>
commit d89e9d6b4930c6505ac3ed35f57ab7f4311d6cf6
Author: Len Brown <len.brown@intel.com>
Date: Wed Feb 6 19:28:02 2008 -0500
ACPI: update DSDT override documentation
Signed-off-by: Len Brown <len.brown@intel.com>
commit 9cbc7960288d28aec95257af59854e1d14ba23b8
Author: Éric Piel <Eric.Piel@tremplin-utc.net>
Date: Tue Feb 5 00:04:58 2008 +0100
ACPI: Add "acpi_no_initrd_override" kernel parameter
The acpi_no_initrd_override parameter permits to disable the load of an ACPI
table from the initramfs.
Signed-off-by: Eric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: Len Brown <len.brown@intel.com>
commit a733a5da97b238e3e3167d3d0aee8fe1e8d04e97
Merge: 299cfe3... 299cfe3... 9e52797...
Author: Len Brown <len.brown@intel.com>
Date: Thu Feb 7 03:38:22 2008 -0500
Merge branches 'release' and 'fluff' into release
Conflicts:
drivers/acpi/scan.c
include/linux/acpi.h
Signed-off-by: Len Brown <len.brown@intel.com>
commit 9e52797131e83688f66fbca6d4cd25b83f33c48f
Author: Alan Cox <alan@lxorguk.ukuu.org.uk>
Date: Thu Jan 3 16:31:42 2008 +0000
ACPI: its a directory not a folder....
The kernel help consistently uses 'directory'
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Len Brown <len.brown@intel.com>
commit e5685b9d35c2cc0a98425b05df30cb837dd1e632
Author: Adrian Bunk <bunk@kernel.org>
Date: Wed Oct 24 18:24:42 2007 +0200
ACPI: misc cleanups
This patch contains the following possible cleanups:
- make the following needlessly global code static:
- drivers/acpi/bay.c:dev_attr_eject
- drivers/acpi/bay.c:dev_attr_present
- drivers/acpi/dock.c:dev_attr_docked
- drivers/acpi/dock.c:dev_attr_flags
- drivers/acpi/dock.c:dev_attr_uid
- drivers/acpi/dock.c:dev_attr_undock
- drivers/acpi/pci_bind.c:acpi_pci_unbind()
- drivers/acpi/pci_link.c:acpi_link_lock
- drivers/acpi/sbs.c:acpi_sbs_callback()
- drivers/acpi/sbshc.c:acpi_smbus_transaction()
- drivers/acpi/sleep/main.c:acpi_sleep_prepare()
- #if 0 the following unused global functions:
- drivers/acpi/numa.c:acpi_unmap_pxm_to_node()
- remove the following unused EXPORT_SYMBOL's:
- acpi_register_gsi
- acpi_unregister_gsi
- acpi_strict
- acpi_bus_receive_event
- register_acpi_bus_type
- unregister_acpi_bus_type
- acpi_os_printf
- acpi_os_sleep
- acpi_os_stall
- acpi_os_read_pci_configuration
- acpi_os_create_semaphore
- acpi_os_delete_semaphore
- acpi_os_wait_semaphore
- acpi_os_signal_semaphore
- acpi_os_signal
- acpi_pci_irq_enable
- acpi_get_pxm
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Acked-by: Alexey Starikovskiy <astarikovskiy@suse.de>
Signed-off-by: Len Brown <len.brown@intel.com>
commit 87ecd5cddaa37f057d8d8c2813e1b748b1804423
Author: Len Brown <len.brown@intel.com>
Date: Tue Jan 1 14:00:00 2008 -0500
ACPI: add missing prink prefix strings
Signed-off-by: Len Brown <len.brown@intel.com>
commit ee1ce6fcb383ba1da9d16e1ba902f592211aa508
Author: Jean Delvare <jdelvare@suse.de>
Date: Thu Dec 6 22:00:36 2007 -0500
ACPI: cleanup acpi.h
Two cleanups to <linux/acpi.h>:
* Stop defining acpi_mp_config, it isn't used anywhere.
* Discard nested "#ifdef CONFIG_ACPI", they are useless and
error-prone.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Len Brown <len.brown@intel.com>
commit 4e83dd95b343a4ecfdb236aa046a5366a29e6f1e
Author: Len Brown <len.brown@intel.com>
Date: Fri Nov 23 18:33:11 2007 -0500
ACPICA: fix CONFIG_ACPI_DEBUG_FUNC_TRACE build
798d91039849486c7a4f1a458a5680cb55a65408
(ACPI: create CONFIG_ACPI_DEBUG_FUNC_TRACE)
failed to associate the new tracing config option with the tracing code.
Signed-off-by: Len Brown <len.brown@intel.com>
commit 299cfe38081bea6dcd8b882375f6f65a980bccf9
Merge: 8976b6f... 443dea7...
Author: Len Brown <len.brown@intel.com>
Date: Thu Feb 7 03:31:17 2008 -0500
Merge branches 'release' and 'hwmon-conflicts' into release
commit 8976b6fd7a0060f72e20d5cec833c03d50874cd1
Merge: 52b097f... 3391a76...
Author: Len Brown <len.brown@intel.com>
Date: Thu Feb 7 03:30:48 2008 -0500
Merge branches 'release' and 'throttling-domains' into release
commit 52b097fff89b14c0b8b7a7deef1d274889b1886d
Merge: 0601955... 0601955... 3fa2cdc...
Author: Len Brown <len.brown@intel.com>
Date: Thu Feb 7 03:25:48 2008 -0500
Merge branches 'release' and 'video' into release
Conflicts:
include/acpi/acpi_bus.h
Signed-off-by: Len Brown <len.brown@intel.com>
commit 3fa2cdcc45a0176de15cac9dbf4ed2834ebf8932
Author: Matthew Garrett <mjg59@srcf.ucam.org>
Date: Thu Feb 7 01:44:06 2008 +0000
ACPI: video: Ignore ACPI video devices that aren't present in hardware
Vendors often ship machines with a choice of integrated or discrete
graphics, and use the same DSDT for both. As a result, the ACPI video
module will locate devices that may not exist on this specific platform.
Attempt to determine whether the device exists or not, and abort the
device creation if it do not exist.
Signed-off-by: Matthew Garrett <mjg59@srcf.ucam.org>
Signed-off-by: Len Brown <len.brown@intel.com>
commit 863c1490e512db40dab61e44b694a493a9e68b3f
Author: Matthew Garrett <mjg59@srcf.ucam.org>
Date: Mon Feb 4 23:31:24 2008 -0800
ACPI: video: reset brightness on resume
Some machines seem to need the backlight brightness to be reset on resume.
Add support for doing so to the video module.
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Matthew Garrett <mjg59@srcf.ucam.org>
Cc: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Len Brown <len.brown@intel.com>
commit 7761f638f6e0f276fe8612ba306d09c40d1b553c
Author: Zhang Rui <rui.zhang@intel.com>
Date: Fri Jan 25 14:48:12 2008 +0800
ACPI: video: call ACPI notifier chain for ACPI video notifications
Call notifier chain for display/brightness switch events.
The kernel mode graphics driver is interested in this.
Sign-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
commit 9ee85241fdaab358dff1d8647f20a478cfa512a1
Author: Zhang Rui <rui.zhang@intel.com>
Date: Fri Jan 25 14:48:06 2008 +0800
ACPI: create notifier chain to get hotkey events to graphics driver
Kernel mode graphics drivers need this ACPI notifier chaine
so that they can get notified upon hotkey events.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
commit ba5e1223422368fd2f4dbb0745f5fbb5fe9a65f1
Author: Zhang Rui <rui.zhang@intel.com>
Date: Fri Jan 25 14:47:57 2008 +0800
ACPI: video: delete unused display switch on hotkey event code
Display switching via ACPI control methods are
not known to work on any platforms.
Further, the X community wants to control the display
switching all by themselves without BIOS/AML involvement.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
commit 8a681a4dee07ea09aedaadc6a2da28d2131dc414
Author: Zhang Rui <rui.zhang@intel.com>
Date: Fri Jan 25 14:47:49 2008 +0800
ACPI: video: create "brightness_switch_enabled" modparam
Introduce new module parameter for brightness control.
"brightness_switch_enabled" is set by default which means
nothing changes upon brightness switch events.
When "brightness_switch_enabled" is cleared via
"echo 0 > /sys/module/video/parameters/brightness_switch_enabled",
ACPI will not try to change the brightness level any more.
Either X will take charge of this or users can change the brightness level
by poking /sys/class/backlight/acpi_videoX/...
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
commit 060195500e0347a6ba8ea89739a9898961eb6f2b
Merge: 26b6f22... dd8cd77...
Author: Len Brown <len.brown@intel.com>
Date: Thu Feb 7 03:19:43 2008 -0500
Merge branches 'release' and 'wmi-2.6.25' into release
commit 26b6f2236615649a0ae6a0de2e9e71a2f9ffeba7
Merge: e5e54bc... e5e54bc... 3c60284...
Author: Len Brown <len.brown@intel.com>
Date: Thu Feb 7 03:18:04 2008 -0500
Merge branches 'release' and 'menlo' into release
Conflicts:
drivers/acpi/video.c
Signed-off-by: Len Brown <len.brown@intel.com>
commit e5e54bc86a1fed9849b22fd736c30b23c4719046
Merge: 70ec75c... 5229e87...
Author: Len Brown <len.brown@intel.com>
Date: Thu Feb 7 03:13:36 2008 -0500
Merge branches 'release' and 'stats' into release
commit 70ec75c5b8e0bda7a16fb387f91e08545f379a0e
Merge: 4f4ae0d... 2fdf074... 23b168d...
Author: Len Brown <len.brown@intel.com>
Date: Thu Feb 7 03:13:13 2008 -0500
Merge branches 'release', 'misc' and 'misc-2.6.25' into release
commit 4f4ae0d42680889c62db4e1f3e6b4aa7787a7257
Merge: d870ec7... 623b78c...
Author: Len Brown <len.brown@intel.com>
Date: Thu Feb 7 03:12:17 2008 -0500
Merge branches 'release' and 'ppc-workaround' into release
commit d870ec7281d8429ab17d2e0324f4d8ca3f3de62d
Merge: 7924e4f... 02f8a85...
Author: Len Brown <len.brown@intel.com>
Date: Thu Feb 7 03:11:56 2008 -0500
Merge branches 'release' and 'hp-cid' into release
commit 7924e4f6519dd5b349ed146fe9fe35206730be67
Merge: 5531d28... 17bc54e...
Author: Len Brown <len.brown@intel.com>
Date: Thu Feb 7 03:11:47 2008 -0500
Merge branches 'release' and 'gpe-ack' into release
commit 5531d28504461c4e96c6fbd80655a2bfd6481583
Merge: acf6386... a64217b...
Author: Len Brown <len.brown@intel.com>
Date: Thu Feb 7 03:11:31 2008 -0500
Merge branches 'release' and 'dmi' into release
commit acf63867ae06ef95eea7bf445ded2f05528a81b1
Merge: c64768a... f757397... 9a0b841...
Author: Len Brown <len.brown@intel.com>
Date: Thu Feb 7 03:11:05 2008 -0500
Merge branches 'release', 'cpuidle-2.6.25' and 'idle' into release
commit c64768a7d671bcde80bca2aed93f9e07edc069c3
Merge: 8f85901... a7f9b1f... b4d2730... 37748eb... ed9cbcd... 856608e... cfaf374... 223630f... 38531e6... b3b233c... 239665a... 0119509... 975c302... 0879802...
Author: Len Brown <len.brown@intel.com>
Date: Thu Feb 7 03:09:43 2008 -0500
Merge branches 'release', 'bugzilla-6217', 'bugzilla-6629', 'bugzilla-6933', 'bugzilla-7186', 'bugzilla-8269', 'bugzilla-8570', 'bugzilla-9139', 'bugzilla-9277', 'bugzilla-9341', 'bugzilla-9444', 'bugzilla-9614', 'bugzilla-9643' and 'bugzilla-9644' into release
commit 8f859016ea49cd8d7c743533bd1ab3db9a813ffa
Merge: dd07a8d... 17196d6...
Author: Len Brown <len.brown@intel.com>
Date: Thu Feb 7 03:07:55 2008 -0500
Merge branches 'release' and 'autoload' into release
commit dd07a8db7283f52f347aee468007556944b5b393
Merge: 877c357... 31e0729... fccd5d0... 547266e...
Author: Len Brown <len.brown@intel.com>
Date: Thu Feb 7 03:07:35 2008 -0500
Merge branches 'release', 'asus', 'sony-laptop' and 'thinkpad' into release
commit 877c357e7511395bc923ec9efc2e8b021a17ed79
Merge: 488b5ec... ad3399c... 7c2670b...
Author: Len Brown <len.brown@intel.com>
Date: Thu Feb 7 03:07:03 2008 -0500
Merge branches 'release', 'acpi_pm_device_sleep_state' and 'battery' into release
commit 9a0b841586c3c6c846effdbe75885c2ebc0031b0
Author: venkatesh.pallipadi@intel.com <venkatesh.pallipadi@intel.com>
Date: Thu Jan 31 17:35:06 2008 -0800
cpuidle: Add a poll_idle method
Add a default poll idle state with 0 latency. Provides an option to users
to use poll_idle by using 0 as the latency requirement.
Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
commit 9b12e18cdc1553de62d931e73443c806347cd974
Author: venkatesh.pallipadi@intel.com <venkatesh.pallipadi@intel.com>
Date: Thu Jan 31 17:35:05 2008 -0800
ACPI: cpuidle: Support C1 idle time accounting
Show C1 idle time in /sysfs cpuidle interface. C1 idle time may not
be entirely accurate in all cases. It includes the time spent
in the interrupt handler after wakeup with "hlt" based C1. But, it will
be accurate with "mwait" based C1.
Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
commit bc71bec91f9875ef825d12104acf3bf4ca215fa4
Author: venkatesh.pallipadi@intel.com <venkatesh.pallipadi@intel.com>
Date: Thu Jan 31 17:35:04 2008 -0800
ACPI: enable MWAIT for C1 idle
Add MWAIT idle for C1 state instead of halt, on platforms that support
C1 state with MWAIT.
Renames cx->space_id to something more appropriate.
Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
commit 2e906655baf1c6f6fccd212fc9e6499dc6928b80
Author: venkatesh.pallipadi@intel.com <venkatesh.pallipadi@intel.com>
Date: Thu Jan 31 17:35:03 2008 -0800
ACPI: idle: Fix acpi_safe_halt usages and interrupt enabling/disabling
acpi_safe_halt() needs interrupts to be disabled for atomic
need_resched check and safe halt. Otherwise we may miss an
interrupt and go into halt.
acpi_safe_halt() also does not enable interrupts on all return paths.
So the callers should handle enable and disable interrupts around it.
Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
commit 23b168d425ca0ca25257ff8205a39f1c2d1b0f27
Author: Pavel Machek <pavel@ucw.cz>
Date: Tue Feb 5 19:27:12 2008 +0100
PM: documentation cleanups
Signed-off-by: Pavel Machek <pavel@suse.cz>
Acked-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Len Brown <len.brown@intel.com>
commit 547266e46cc0b35ce51bd1f37f261d831927431f
Author: Roel Kluin <12o3l@tiscali.nl>
Date: Tue Feb 5 00:24:56 2008 +0100
ACPI: thinkpad-acpi: second TP_EC_FAN_FULLSPEED should be TP_EC_FAN_AUTO
fix bug in safety net for TPEC fan control mode
eaa7571b2d1a08873e4bdd8e6db3431df61cd9ad
Signed-off-by: Roel Kluin <12o3l@tiscali.nl>
Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
commit 443dea72d5f428170de6d6e3c4c1a1e2b7632b65
Author: Thomas Renninger <trenn@suse.de>
Date: Mon Feb 4 23:31:23 2008 -0800
ACPI: Export acpi_check_resource_conflict
Export acpi_check_resource_conflict(), sometimes drivers already have
a struct resource at hand so no need to use the wrappers to build a new
one.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Cc: "Mark M. Hoffman" <mhoffman@lightlink.com>
Cc: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Len Brown <len.brown@intel.com>
commit df92e695998e1bc6e426a840eb86d6d1ee87e2a5
Author: Thomas Renninger <trenn@suse.de>
Date: Mon Feb 4 23:31:22 2008 -0800
ACPI: track opregion names to avoid driver resource conflicts.
Small ACPICA extension to be able to store the name of operation regions in osl.c later
In ACPI, AML can define accesses to IO ports and System Memory by Operation
Regions. Those are not registered as done by PNPACPI using resource templates
(and _CRS/_SRS methods).
The IO ports and System Memory regions may get accessed by arbitrary AML code.
When native drivers are accessing the same resources bad things can happen
(e.g. a critical shutdown temperature of 3000 C every 2 months or so).
It is not really possible to register the operation regions via
request_resource, as they often overlap with pnp or other resources (e.g.
statically setup IO resources below 0x100).
This approach stores all Operation Region declarations (IO and System Memory
only) at ACPI table parse time. It offers a similar functionality like
request_region and let drivers which are known to possibly use the same IO
ports and Memory which are also often used by ACPI (hwmon and i2c) check for
ACPI interference.
A boot parameter acpi_enforce_resources=strict/lax/no is provided, which
is default set to lax:
- strict: let conflicting drivers fail to load with an error message
- lax: let conflicting driver work normal with a warning message
- no: no functional change at all
Depending on the feedback and the kind of interferences we see, this
should be set to strict at later time.
Goal of this patch set is:
- Identify ACPI interferences in bug reports (very hard to reproduce
and to identify)
- Find BIOSes for that an ACPI driver should exist for specific HW
instead of a native one.
- stability in general
Provide acpi_check_{mem_}region.
Drivers can additionally check against possible ACPI interference by also
invoking this shortly before they call request_region.
If -EBUSY is returned, the driver must not load.
Use acpi_enforce_resources=strict/lax/no options to:
- strict: let conflicting drivers fail to load with an error message
- lax: let conflicting driver work normal with a warning message
- no: no functional change at all
Cc: "Mark M. Hoffman" <mhoffman@lightlink.com>
Cc: Jean Delvare <khali@linux-fr.org>
Cc: Len Brown <lenb@kernel.org>
Cc: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Len Brown <len.brown@intel.com>
commit 1a3b77ae60f19fa85f4cdc34b6c09efb1a18372c
Author: Matthias Kaehlcke <matthias.kaehlcke@gmail.com>
Date: Mon Feb 4 23:31:20 2008 -0800
ACPI: acpi_pci_irq_find_prt_entry(): use list_for_each_entry() instead of list_for_each()
Signed-off-by: Matthias Kaehlcke <matthias.kaehlcke@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Len Brown <len.brown@intel.com>
commit e76d5f7e831a3f33dd6fa8eb94533b0b4cb22b6f
Author: Miguel Botón <mboton@gmail.com>
Date: Mon Feb 4 23:31:19 2008 -0800
ACPI: remove duplicated warning message
Remove duplicated warning message in acpi_power_transition()
ACPI: Transitioning device [%s] to D%d\n
This warning message is printed by acpi_bus_set_power() so we don't
need to print it again.
Signed-off-by: Miguel Botón <mboton@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Len Brown <len.brown@intel.com>
commit 31e0729a85c1e8ffaf4d14b4c201c28b5d1c9585
Author: Luca Tettamanti <kronos.it@gmail.com>
Date: Mon Feb 4 23:31:18 2008 -0800
asus_acpi: add support for F3Sa
Add support for ASUS F3Sa notebook. Features:
- LCD on/off
- Brightness
- Wifi kill
- Bluetooth kill
Signed-off-by: Luca Tettamanti <kronos.it@gmail.com>
Cc: Corentin Chary <corentincj@iksaif.net>
Cc: Karol Kozimor <sziwan@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Len Brown <len.brown@intel.com>
commit e1af14e4b3d5f2a348987e3069ec835b782782b0
Author: Roel Kluin <12o3l@tiscali.nl>
Date: Sat Feb 2 21:07:38 2008 +0100
asus-laptop: add parentheses
'!' has a higher priority than '&': bitanding has no effect.
Signed-off-by: Roel Kluin <12o3l@tiscali.nl>
Signed-off-by: Len Brown <len.brown@intel.com>
commit f8d1c94b346b62747322728e00e11f552cd90902
Author: Corentin CHARY <corentincj@iksaif.net>
Date: Wed Jan 16 16:56:42 2008 +0100
asus-laptop new write_acpi_int
Just a little modification of write_acpi_int
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Len Brown <len.brown@intel.com>
commit 5229e87d59cef33539322948bd8e3b5a537f7c97
Author: Len Brown <len.brown@intel.com>
Date: Wed Feb 6 01:26:55 2008 -0500
ACPI: create /sys/firmware/acpi/interrupts
See Documentation/ABI/testing/sysfs-firmware-acpi
Based-on-original-patch-by: Luming Yu <luming.yu@intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Len Brown <len.brown@intel.com>
commit 6ed31e92e94830c138fbd470486383380710069a
Author: Éric Piel <Eric.Piel@tremplin-utc.net>
Date: Tue Feb 5 00:04:50 2008 +0100
ACPI: Taint kernel on ACPI table override (format corrected)
When an ACPI table is overridden (for now this can happen only for DSDT)
display a big warning and taint the kernel with flag A.
Signed-off-by: Eric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: Len Brown <len.brown@intel.com>
commit 71fc47a9adf8ee89e5c96a47222915c5485ac437
Author: Markus Gaugusch <dsdt@gaugusch.at>
Date: Tue Feb 5 00:04:06 2008 +0100
ACPI: basic initramfs DSDT override support
The basics of DSDT from initramfs. In case this option is selected,
populate_rootfs() is called a bit earlier to have the initramfs content
available during ACPI initialization.
This is a very similar path to the one available at
http://gaugusch.at/kernel.shtml but with some update in the
documentation, default set to No and the change of populate_rootfs() the
"Jeff Mahony way" (which avoids reading the initramfs twice).
Signed-off-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Eric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: Len Brown <len.brown@intel.com>
commit 7c2670bbb53820d0a4fab8d74593eeccd1eef225
Author: maximilian attems <max@stro.at>
Date: Tue Jan 22 18:46:50 2008 +0100
ACPI: battery: add sysfs serial number
egrep serial /proc/acpi/battery/BAT0/info
serial number: 32090
serial number can tell you from the imminent danger
of beeing set on fire.
Signed-off-by: maximilian attems <max@stro.at>
Acked-by: Alexey Starikovskiy <astarikovskiy@suse.de>
Signed-off-by: Len Brown <len.brown@intel.com>
commit dd8cd7793781c87be47bbfee65efa3fb5110f898
Author: Carlos Corbacho <carlos@strangeworlds.co.uk>
Date: Tue Feb 5 02:17:15 2008 +0000
tc1100-wmi: Add driver for HP Compaq TC1100 Tablets
This is based on the 2004 out-of-tree work of Jamey Hicks, to add
support via WMI for controlling the jog dial and wireless on these
tablets.
v1:
Original release
v2:
As per Joshua Wise's comments, change bluetooth to jogdial (an error from
the original driver).
Signed-off-by: Carlos Corbacho <carlos@strangeworlds.co.uk>
CC: Matthew Garrett <mjg59@srcf.ucam.org>
CC: Jamey Hicks <jamey.hicks@nokia.com>
CC: Joshua Wise <joshua@joshuawise.com>
Signed-off-by: Len Brown <len.brown@intel.com>
commit 745a5d2126926808295742932d0e36d485efa485
Author: Carlos Corbacho <carlos@strangeworlds.co.uk>
Date: Tue Feb 5 02:17:10 2008 +0000
acer-wmi: Add driver for newer Acer laptops
This is a driver for newer Acer (and Wistron) laptops. It adds wireless
radio and bluetooth control, and on some laptops, exposes the mail LED and
LCD backlight.
v1:
* Initial release
v2:
* Replace left over ACPI references with WMI
* Add GUID based autoloading (depends on future work to WMI)
* Add DMI based autoloading (backup solution until WMI sysfs/ class
work is available)
* Checkpatch fixes
v3:
* Add new EC quirks for Aspire 3100 & 5100, and Extensa 5220
v4:
* Simplified internal handling of WMID and AMW0 devices
* Add autodetection for bluetooth and maximum brightness on AMW0 V2 and
WMID laptops.
v5:
* Add EC quirk for Medion MD 98000
* Add autodetection for AMW0, and mail LED on AMW0 and AMW0 V2.
* Improve error handling
* Fix AMW0 V2 bluetooth and wireless, by using both WMID and AMW0 methods
to ensure that the correct value is always set.
v6:
* Fix 'use before initialisation' bug with quirks.
v7
* Fix bug on AMW0 where acer-wmi would exit if a mail LED was not
detected.
* Add Acer Aspire 9110 mail LED support
* Fix section mismatch warnings
Signed-off-by: Carlos Corbacho <carlos@strangeworlds.co.uk>
CC: Matthew Garrett <mjg59@srcf.ucam.org>
Signed-off-by: Len Brown <len.brown@intel.com>
commit bff431e49ff531a343fbb2b4426e313000844f32
Author: Carlos Corbacho <carlos@strangeworlds.co.uk>
Date: Tue Feb 5 02:17:04 2008 +0000
ACPI: WMI: Add ACPI-WMI mapping driver
The following is an implementation of the Windows Management
Instrumentation (WMI) ACPI interface mapper (PNP0C14).
What it does:
Parses the _WDG method and exports functions to process WMI method calls,
data block query/ set commands (both based on GUID) and does basic event
handling.
How: WMI presents an in kernel interface here (essentially, a minimal
wrapper around ACPI)
(const char *guid assume the 36 character ASCII representation of
a GUID - e.g. 67C3371D-95A3-4C37-BB61-DD47B491DAAB)
wmi_evaluate_method(const char *guid, u8 instance, u32 method_id,
const struct acpi_buffer *in, struct acpi_buffer *out)
wmi_query_block(const char *guid, u8 instance,
struct acpi_buffer *out)
wmi_set_block(const char *guid, u38 instance,
const struct acpi_buffer *in)
wmi_install_notify_handler(acpi_notify_handler handler);
wmi_remove_notify_handler(void);
wmi_get_event_data(u32 event, struct acpi_buffer *out)
wmi_has_guid(const char guid*)
wmi_has_guid() is a helper function to find if a GUID exists or not on the
system (a quick and easy way for WMI dependant drivers to see if the
the method/ block they want exists, since GUIDs are supposed to be unique).
Event handling - allow a WMI based driver to register a notifier handler
for each GUID with WMI. When a notification is sent to a GUID in WMI, the
handler registered with WMI is then called (it is left to the caller to
ask for the WMI event data associated with the GUID, if needed).
What it won't do:
Unicode - The MS article[1] calls for converting between ASCII and Unicode (or
vice versa) if a GUID is marked as "string". This is left up to the calling
driver.
Handle a MOF[1] - the WMI mapper just exports methods, data and events to
userspace. MOF handling is down to userspace.
Userspace interface - this will be added later.
[1] http://www.microsoft.com/whdc/system/pnppwr/wmi/wmi-acpi.mspx
===
ChangeLog
==
v1 (2007-10-02):
* Initial release
v2 (2007-10-05):
* Cleaned up code - split up super "wmi_evaluate_block" -> each external
symbol now handles its own ACPI calls, rather than handing off to
a "super" method (and in turn, is a lot simpler to read)
* Added a find_guid() symbol - return true if a given GUID exists on
the system
* wmi_* functions now return type acpi_status (since they are just
fancy wrappers around acpi_evaluate_object())
* Removed extra debug code
v3 (2007-10-27)
* More code clean up - now passes checkpatch.pl
* Change data block calls - ref MS spec, method ID is not required for
them, so drop it from the function parameters.
* Const'ify guid in the function call parameters.
* Fix _WDG buffer handling - copy the data to our own private structure.
* Change WMI from tristate to bool - otherwise the external functions are
not exported in linux/acpi.h if you try to build WMI as a module.
* Fix more flag comparisons.
* Add a maintainers entry - since I wrote this, I should take the blame
for it.
v4 (2007-10-30)
* Add missing brace from after fixing checkpatch errors.
* Rewrote event handling - allow external drivers to register with WMI to
handle WMI events
* Clean up flags and sanitise flag handling
v5 (2007-11-03)
* Add sysfs interface for userspace. Export events over netlink again.
* Remove module left overs, fully convert to built-in driver.
* Tweak in-kernel API to use u8 for instance, since this is what the GUID
blocks use (so instance cannot be greater than u8).
* Export wmi_get_event_data() for in kernel WMI drivers.
v6 (2007-11-07)
* Split out userspace into a different patch
v7 (2007-11-20)
* Fix driver to handle multiple PNP0C14 devices - store all GUIDs using
the kernel's built in list functions, and just keep adding to the list
every time we handle a PNP0C14 devices - GUIDs will always be unique,
and WMI callers do not know or care about different devices.
* Change WMI event handler registration to use its' own event handling
struct; we should not pass an acpi_handle down to any WMI based drivers
- they should be able to function with only the calls provided in WMI.
* Update my e-mail address
v8 (2007-11-28)
* Convert back to a module.
* Update Kconfig to default to building as a module.
* Remove an erroneous printk.
* Simply comments for string flag (since we now leave the handling to the
caller).
v9 (2007-12-07)
* Add back missing MODULE_DEVICE_TABLE for autoloading
* Checkpatch fixes
v10 (2007-12-12)
* Workaround broken GUIDs declared expensive without a WCxx method.
* Minor cleanups
v11 (2007-12-17)
* More fixing for broken GUIDs declared expensive without a WCxx method.
* Add basic EmbeddedControl region handling.
v12 (2007-12-18)
* Changed EC region handling code, as per Alexey's comments.
v13 (2007-12-27)
* Changed event handling so that we can have one event handler registered
per GUID, as per Matthew Garrett's suggestion.
v14 (2008-01-12)
* Remove ACPI debug statements
v15 (2008-02-01)
* Replace two remaining 'x == NULL' type tests with '!x'
v16 (2008-02-05)
* Change MAINTAINERS entry, as I am not, and never have been, paid to work
on WMI
* Remove 'default' line from Kconfig
Signed-off-by: Carlos Corbacho <carlos@strangeworlds.co.uk>
CC: Matthew Garrett <mjg59@srcf.ucam.org>
CC: Alexey Starikovskiy <aystarik@gmail.com>
Signed-off-by: Len Brown <len.brown@intel.com>
commit a64217b922e5a06f328e3962ff903ce829aff3d6
Author: Len Brown <len.brown@intel.com>
Date: Mon Feb 4 00:57:33 2008 -0500
ACPI: blacklist update
move some OSI(Linux) to "disable" from "unknown"
to reduce dmesg lines that we don't really need.
update Acer 5315 comment
update Dell entries, add R200 entry
update Apple entries
Signed-off-by: Len Brown <len.brown@intel.com>
commit 1d15d84e8b443971cafd885d18f091814ba32cb7
Author: Adrian Bunk <bunk@kernel.org>
Date: Tue Jan 29 00:10:15 2008 +0200
ACPI: make struct osi_linux static
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Len Brown <len.brown@intel.com>
commit 12d3931c1007a7ad47364a4884e5a6c6e25aa5e1
Author: Adrian Bunk <bunk@kernel.org>
Date: Tue Jan 29 00:10:12 2008 +0200
ACPI: make acpi_dmi_dump() static
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Len Brown <len.brown@intel.com>
commit d0280a02f7412f3fdd45fbd2f51f59d7d8a03fe8
Author: Len Brown <len.brown@intel.com>
Date: Sun Feb 3 17:32:31 2008 -0500
ACPI: update blacklist comments
...based on additional feedback -- no code change.
Signed-off-by: Len Brown <len.brown@intel.com>
commit e6298c6d60838495978cdbe5555dc290785bb961
Author: Len Brown <len.brown@intel.com>
Date: Fri Jan 25 15:40:02 2008 -0500
DMI: remove duplicate helper routine
Use existing dmi_get_system_info(),
Delete duplicate dmi_get_slot()
Spotted-by: Wim Van Sebroeck <wim@iguana.be>
Signed-off-by: Len Brown <len.brown@intel.com>
commit 8964ebb8c35533f4084cc667079a0ce620356104
Author: Len Brown <len.brown@intel.com>
Date: Fri Jan 25 15:39:50 2008 -0500
ACPI: remove redundant Acer blacklist entry
dmi_check_system() does sub-string matching using strstr(),
rather than exact string compares with !strcmp().
So delete the longer of the Acer blacklist entries, as its
function is just a redundant console message.
Spotted-by: Carlos Corbacho <carlos@strangeworlds.co.uk>
Signed-off-by: Len Brown <len.brown@intel.com>
commit 3c602840528cf1aa835e6e32d76a0a45936b8e4c
Author: Len Brown <len.brown@intel.com>
Date: Sat Feb 2 04:05:54 2008 -0500
ACPI: fan: build fix for CONFIG_ACPI_PROCFS=n
drivers/acpi/fan.c:340: error: ‘acpi_fan_dir’ undeclared (first use in this function)
Signed-off-by: Len Brown <len.brown@intel.com>
commit 3391a76f2bbb74e42b9ba44c05a7366ffd388753
Author: Len Brown <len.brown@intel.com>
Date: Sat Feb 2 03:56:18 2008 -0500
ACPI: throttling: fix build warning
Signed-off-by: Len Brown <len.brown@intel.com>
commit 33a2a529f7a2fb481812b99737176628fda457b0
Author: Zhao Yakui <yakui.zhao@intel.com>
Date: Mon Jan 28 13:55:56 2008 +0800
ACPI: Update the t-state for every affected cpu when t-state is changed
According to ACPI spec, the _TSD object provides T-state control cross
logical processor dependency information to OSPM. So the t-state
coordination should be considered when T-state for one cpu is changed.
According to ACPI spec, three types of coordination are defined.
SW_ALL, SW_ANY and HW_ALL.
SW_ALL: it means that OSPM needs to initiate T-state transition on
all processors in the domain. It is necessary to call throttling set function
for all affected cpus.
SW_ANY: it means that OSPM may initiate T-state transition on any processor in
the domain.
HW_ALL: Spec only says that hardware will perform the coordination and doesn't
recommend how OSPM coordinate T-state among the affected cpus. So it is treated
as the type of SW_ALL. It means that OSPM needs to initiate t-state transition
on all the processors in the domain.
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
commit e4aa5cb2138e7423a6edef6a76a3837b94c2f107
Author: Zhao Yakui <yakui.zhao@intel.com>
Date: Mon Jan 28 13:54:46 2008 +0800
ACPI : Add T-state event notifier function
The t-state coordination should be considered when T-state for one cpu
is changed.It means that OSPM should select one proper target T-state for
the all affected cpus before updating T-state.
So the function of acpi_processor_throttling_notifier is added.
Before updating T-state it can be called for all the affected cpus to get
the proper target T-state, which can meet the requirement of thermal, user and
_TPC. After updating T-state, it can be called to update T-state flag.
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
commit 1180509f6b3ec3ac2505375a78ccd72d270f2169
Author: Zhao Yakui <yakui.zhao@intel.com>
Date: Mon Jan 28 13:53:42 2008 +0800
ACPI : Update T-state coordination after getting _TSD info
Accordint to ACPI spec, the _TSD object provides T-state control cross
logical processor dependency information to OSPM.
After the _TSD data for all cpus are obtained, OSPM will set up
the T-state coordination between CPUs.
Of course if the _TSD doesn't exist or _TSD data is incorrect , it is
assumed that there is no T-state coordination and T-state is changed
independently.
Now there is no proper solution to update T-state coordination after
one cpu is hotplugged. So this patch won't support hotplugged cpu very well.
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
commit 87654273ef63213f90c4243913987436495824f0
Author: Zhao Yakui <yakui.zhao@intel.com>
Date: Mon Jan 28 13:53:30 2008 +0800
ACPI : Check parameter when calling acpi_processor_get/set_throttling
It is necessary to check the parameter when calling the function of
acpi_processor_get/set_throttling function so as to avoid the NULL
pointer reference in pr or throttling.
http://bugzilla.kernel.org/show_bug.cgi?id=9747
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
commit 3abbd337c60591305cbfeb984ff2922c175be37f
Author: Zhao Yakui <yakui.zhao@intel.com>
Date: Mon Jan 28 13:53:21 2008 +0800
ACPI: Set _PSD ACPI_PDC_SMP_T_SWCOORD
The ACPI_PDC_SMP_T_SWCOORD bit is set by and OS that is capable of
native ACPI throttling software coordination for mutli-processors
using the _TSD information.
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
commit 0119509c4fbc9adcef1472817fda295334612976
Author: Matthew Garrett <mjg59@srcf.ucam.org>
Date: Thu Jan 17 03:39:36 2008 +0000
ACPI: video: Ignore devices that aren't present in hardware
Vendors often ship machines with a choice of integrated or discrete
graphics, and use the same DSDT for both. As a result, the ACPI video
module will locate devices that may not exist on this specific platform.
Attempt to determine whether the device exists or not, and abort the
device creation if it doesn't.
http://bugzilla.kernel.org/show_bug.cgi?id=9614
Signed-off-by: Matthew Garrett <mjg59@srcf.ucam.org>
Acked-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
commit 653a00c9662304ef72a3eb4e681c91720960e0b4
Author: Zhang Rui <rui.zhang@intel.com>
Date: Thu Jan 17 15:51:18 2008 +0800
ACPI: thermal fixup
The alias name may be used in _PSL, _ALx and _TZD,
so we bind the cooling device only if the acpi_device node matches.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Thomas Sujith <sujith.thomas@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
commit cc0573b3250214034062ddf8c64359596d8af521
Author: Thomas Sujith <sujith.thomas@intel.com>
Date: Fri Jan 25 11:45:44 2008 +0800
intel_menlo: introduce new platform specific driver
Intel menlow platform specific driver for thermal management extension.
Signed-off-by: Thomas Sujith <sujith.thomas@intel.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
commit 041d4bbf128f645fe53bb22309efb9db14dbf5b5
Author: Zhang Rui <rui.zhang@intel.com>
Date: Thu Jan 17 15:51:19 2008 +0800
ACPI: CELSIUS_TO_KELVIN fixup
Fix an imprecision in CELSIUS_TO_KELVIN and move these
two macroes to a proper place.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Thomas Sujith <sujith.thomas@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
commit 207339398ecb0835331c748612898dad2a09fdec
Author: Zhang Rui <rui.zhang@intel.com>
Date: Thu Jan 17 15:51:21 2008 +0800
ACPI: attach thermal zone info
Intel menlow driver needs to get the pointer of themal_zone_device
structure of an ACPI thermal zone.
Attach this to each ACPI thermal zone device object.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Thomas Sujith <sujith.thomas@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
commit 702ed512de9c8a67a69a981c73b7337c2131f198
Author: Zhang Rui <rui.zhang@intel.com>
Date: Thu Jan 17 15:51:22 2008 +0800
ACPI: register ACPI Video LCD as generic thermal cooling device
Register ACPI video device as thermal cooling devices as they may be listed
in _TZD method and the backlight control can be used for throttling.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Thomas Sujith <sujith.thomas@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
commit d9460fd227ed2ce52941b6a12ad4de05c195f6aa
Author: Zhang Rui <rui.zhang@intel.com>
Date: Thu Jan 17 15:51:23 2008 +0800
ACPI: register ACPI Processor as generic thermal cooling device
Register ACPI processor as thermal cooling devices.
A combination of processor T-state and P-state are used for thermal throttling.
the processor will reduce the frequency first and then set the T-state.
we use cpufreq_thermal_reduction_pctg to calculate the cpufreq limit,
and call cpufreq_verify_with_limit to set the cpufreq limit.
if cpufreq driver is loaded, then we have four cooling state for cpufreq control.
cooling state 0: cpufreq limit == max_freq
cooling state 1: cpufreq limit == max_freq * 80%
cooling state 2: cpufreq limit == max_freq * 60%
cooling state 3: cpufreq limit == max_freq * 40%
after the cpufreq limit is set to 40 percentage of the max_freq,
we use T-state for cooling.
eg. a processor has P-state support, and it has 8 T-state (T0-T7),
the max_state of the proceesor is 10:
state cpufreq-limit T-state
0: max_freq T0
1: max_freq * 80% T0
2: max_freq * 60% T0
3: max_freq * 40% T0
4: max_freq * 40% T1
5: max_freq * 40% T2
6: max_freq * 40% T3
7: max_freq * 40% T4
8: max_freq * 40% T5
9: max_freq * 40% T6
10: max_freq * 40% T7
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Signed-off-by: Thomas Sujith <sujith.thomas@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
commit 05a83d972293f39a66bc2aa409a5e7996bba585d
Author: Zhang Rui <rui.zhang@intel.com>
Date: Thu Jan 17 15:51:24 2008 +0800
ACPI: register ACPI Fan as generic thermal cooling device
Register ACPI Fan as thermal cooling device.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Thomas Sujith <sujith.thomas@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
commit ce44e19701ac1de004815c225585ff617c5948b4
Author: Zhang Rui <rui.zhang@intel.com>
Date: Thu Jan 17 15:51:25 2008 +0800
ACPI: ACPI thermal zone handle notification correctly
Change the ACPI thermal action upon notification 0x81 and 0x82.
According to the ACPI spec, we should:
re-evaluate _PSV and _ACx methods upon notification 0x81
re-evaluate _PSL and _ALx and _TZD upon notificaiton 0x82.
But the current code re-evaluates all the trip points for 0x81 while
only re-evaluates _TZD for 0x82.
Fix this violation of ACPI spec.
TODO: devices in _PSL, _ALx and _TZD may change after a notification 0x82.
At this time, we need to re-bind the cooling devices with the thermal zone.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Thomas Sujith <sujith.thomas@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
commit 3f655ef8c439e0775ffb7d1ead5d1d4f060e1f8b
Author: Zhang Rui <rui.zhang@intel.com>
Date: Thu Jan 17 15:51:11 2008 +0800
ACPI: register ACPI thermal zone as generic thermal zone devices
Register ACPI thermal zone as thermal zone device.
the new sys I/F for ACPI thermal zone will be like this:
/sys/class/thermal:
|thermal_zone1:
|-----type: "ACPI thermal zone". RO
|-----temp: the current temperature. RO
|-----mode: the current working mode. RW.
the default value is "kernel" which means thermal
management is done by ACPI thermal driver.
"echo user > mode" prevents all the ACPI thermal driver
actions upon any trip points.
|-----trip_point_0_temp: the threshold of trip point 0. RO.
|-----trip_point_0_type: "critical". RO.
the type of trip point 0
This may be one of critical/hot/passive/active[x]
for an ACPI thermal zone.
...
|-----trip_point_3_temp:
|-----trip_point_3_type: "active[1]"
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Thomas Sujith <sujith.thomas@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
commit 203d3d4aa482339b4816f131f713e1b8ee37f6dd
Author: Zhang Rui <rui.zhang@intel.com>
Date: Thu Jan 17 15:51:08 2008 +0800
the generic thermal sysfs driver
The Generic Thermal sysfs driver for thermal management.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Thomas Sujith <sujith.thomas@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
commit 38531e6fe51ad5c7dfe72e0e066b5f54bc1921cd
Author: Matthew Garrett <mjg59@srcf.ucam.org>
Date: Wed Dec 26 02:03:26 2007 +0000
ACPI: video: Rationalise ACPI backlight implementation
The sysfs backlight class provides no mechanism for querying the
acceptable brightness for a backlight. The ACPI spec states that values
are only valid if they are reported as available by the firmware. Since
we can't provide that information to userspace, instead collapse the
range to the number of actual values that can be set.
http://bugzilla.kernel.org/show_bug.cgi?id=9277
Signed-off-by: Matthew Garrett <mjg59@srcf.ucam.org>
Acked-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
commit 1cee5cce9776d88778b6c00e3f72fffbcbec40d4
Author: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Date: Tue Jan 8 13:02:57 2008 -0200
ACPI: thinkpad-acpi: bump up version to 0.19
The major code reorganization and cleanups, and new HKEY events, plus
poll()/select() support are good reasons to checkpoint a new version...
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
commit 6a2e293c34a41446c091cb18758cf64117021b72
Author: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Date: Tue Jan 8 13:02:56 2008 -0200
ACPI: thinkpad-acpi: update copyright dates to 2008
Update the copyright headers to include 2008.
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
commit 50ebec09f1a79df27afeceb14a3059944f327e1d
Author: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Date: Tue Jan 8 13:02:55 2008 -0200
ACPI: thinkpad-acpi: add poll() support to some sysfs attributes
Implement poll()/select() support through sysfs_notify() for some key
attributes which userspace might want to poll() or select() on.
In order to let userspace know poll()/select() support is available for an
attribute, the thinkpad-acpi sysfs interface version is also bumped up.
Further changes that add poll()/select() capabilities to any pre-existing
attributes will also increment the sysfs interface version.
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
commit 013c40e457ac573b29daa0e369c2ba6729c23557
Author: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Date: Tue Jan 8 13:02:54 2008 -0200
ACPI: thinkpad-acpi: silence _sta warning
When both CONFIG_THINKPAD_ACPI_DOCK and CONFIG_THINKPAD_ACPI_BAY are
undefined, _sta is not used and that causes a gcc warning. Fix it
(and I think this is a regression, I am pretty sure I fixed this once
before, sorry about that).
Issue reported by: Pritt Laes.
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Cc: Pritt Laes <plaes@plaes.org>
Signed-off-by: Len Brown <len.brown@intel.com>
commit d1edb2b5f1d016d679600cccf2716e0134fff917
Author: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Date: Tue Jan 8 13:02:53 2008 -0200
ACPI: thinkpad-acpi: add X61t HKEY events
Tomas Carnecky reports that events 0x5009 and 0x500a are swivel events, and
that 0x500b/0x500c are tablet pen storage bay events.
Document these events, and avoid nasty messages when they happen.
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
commit a713b4d7bca51e56cdb5357507f46674111d032c
Author: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Date: Tue Jan 8 13:02:52 2008 -0200
ACPI: thinkpad-acpi: wakeup on hotunplug reporting
Handle some HKEY events that the firmware uses to report the reason for a
wake up, and to also notify that the system could go back to sleep (if it
woke up just to eject something from the bay, or to undock).
The driver will report the reason of the last wake up in the sysfs
attribute "wakeup_reason": 0 for "none, unknown, or standard ACPI wake up
event", 1 for "bay ejection request" and 2 for "undock request".
The firmware will also report if the operation that triggered the wake up
has been completed, by issuing an HKEY 0x3003 or 0x4003 event. If the
operation fails, no event is sent. When such a hotunplug sucessfull
notification is issued, the driver sets the attribute
"wakeup_hotunplug_complete" to 1.
While the firmware does tell us whether we are waking from a suspend or
hibernation scenario, the Linux way of hibernating makes this information
not reliable, and therefore it is not reported.
The idea is that if any of these attributes are non-zero, userspace might
want to do something at the end of the "wake up from sleep" procedures,
such as offering to send the machine back into sleep as soon as it is safe
to do so.
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
commit 3b64b51d20d9b633bb2efe63af785a49f8092898
Author: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Date: Tue Jan 8 13:02:51 2008 -0200
ACPI: thinkpad-acpi: cleanup hotkey_notify and HKEY log messages
Use a generic message on hotkey_notify to log unknown and unhandled events,
and cleanup hotkey_notify a little.
Also, document event 0x5010 (brightness changed notification) and do not
log it as an unknown event (even if we do not use it for anything right
now).
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
commit 083f17606f624c79555e313d87cf37ac1486b073
Author: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Date: Tue Jan 8 13:02:50 2008 -0200
ACPI: thinkpad-acpi: add suspend handler
Add a handler for suspend events.
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
commit 35ff8b9fa90d97f3a19ea3e2311385927535ebc9
Author: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Date: Tue Jan 8 13:02:49 2008 -0200
ACPI: thinkpad-acpi: some checkpatch.pl fluff
Fix some of the crap reported by checkpatch.pl.
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
commit e0c7dfe70170ccee2b538494f92e61de8edab990
Author: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Date: Tue Jan 8 13:02:48 2008 -0200
ACPI: thinkpad-acpi: rename IBM in defines
Rename defines with IBM in their name that are related to the older
driver name (ibm-acpi) to TPACPI, unless they are specific to IBM
ThinkPads.
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
commit f68080f86d8b43bf3ff4c309f1bc9aa4d3fdf735
Author: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Date: Tue Jan 8 13:02:47 2008 -0200
ACPI: thinkpad-acpi: module glue cleanups
General cleanup of module glue: Do some code reordering, and add
missing parameter help text.
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
commit 4b45cc076bc1964352f4a603a18c511ac182b98f
Author: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Date: Tue Jan 8 13:02:46 2008 -0200
ACPI: thinkpad-acpi: spring cleanup part 4
Remove dead code, and anything in the old changelog that is not a thank
you credit, or a key point to track down history.
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
commit b21a15f6d065e837076cf417720afe1c3d6ed10d
Author: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Date: Tue Jan 8 13:02:45 2008 -0200
ACPI: thinkpad-acpi: spring cleanup part 3
Reorder code in the file to get rid of more of the forward declarations,
and to make things cleaner and more organized.
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
commit f74a27d4bda42ee779940adaa34c5c196dda5d32
Author: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Date: Tue Jan 8 13:02:44 2008 -0200
ACPI: thinkpad-acpi: spring cleanup part 2
Move most subdriver-related stuff imported from the header file closer to
their subdriver code. Also, delete unneeded forward declarations.
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
commit 0c78039fcdb0806fafcc40400ace7fb7e81c65a5
Author: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Date: Tue Jan 8 13:02:43 2008 -0200
ACPI: thinkpad-acpi: spring cleanup part 1
Remove the header file. Private header files used by a single .c file are
in bad taste, and I know better now.
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
commit 50efd8310f4f532231b15c6bcb9007c99ac05466
Author: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Date: Tue Jan 8 13:02:42 2008 -0200
ACPI: thinkpad-acpi: bump up version to 0.18
The NVRAM polling support for hot keys is reason enough to
bump up the version string. Do it.
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
commit 01e88f25985d8ea5866c9a73d56b3a9a9145066f
Author: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Date: Tue Jan 8 13:02:41 2008 -0200
ACPI: thinkpad-acpi: add CMOS NVRAM polling for hot keys (v9)
Older ThinkPad models do not export some of the hot keys over the
event-based ACPI hot key interface. For these models, one has to poll
the CMOS NVRAM to check the key state at a rate faster than the expected
rate at which the user might repeatedly press the same hot key.
This patch implements this functionality for many of the hotkeys in a
transparent way: hot keys will now Just Work, and the driver knows the
best approach (events or NVRAM polling) to employ, based on the
HKEY.MHKA ACPI method.
Also, the driver can turn off the polling when there are no users for
the hot keys that need such polling.
The NVRAM-based hot keys of the A3x series that have never been
implemented by later models are not supported, to avoid changes in the
keymap of the input devices that could cause headaches in the future.
There is a Kconfig option to avoid compiling the NVRAM polling code, as
it is not very small, and unlikely to be useful on any ThinkPad newer
than a T40, X31 or R52.
This feature is based on a previous effort by Richard Hughes.
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Cc: Richard Hughes <hughsient@gmail.com>
Signed-off-by: Len Brown <len.brown@intel.com>
commit b7c8c200bfbf523ea0a72fd8a5e39089c74da371
Author: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Date: Tue Jan 8 13:02:40 2008 -0200
ACPI: thinkpad-acpi: prepare for NVRAM polling support
Make some small internal thinkpad-acpi changes to the hotkey subdriver code
that will make it easier to add NVRAM polling support.
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
commit b2c985e7eba858a1765db6d56bdd4df775f53633
Author: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Date: Tue Jan 8 13:02:39 2008 -0200
ACPI: thinkpad-acpi: refactor hotkey_get and hotkey_set (v2)
Refactor and organize the code a bit for the NVRAM polling support:
1. Split hotkey_get/set into hotkey_status_get/set and hotkey_mask_get/set;
2. Cache the status of hot key mask for later driver use;
3. Make sure the cache of hot key mask is refreshed when needed;
4. log a printk notice when the firmware doesn't set the hot key
mask to exactly what we asked it to;
5. Add proper locking to the data structures.
Only (4) should be user-noticeable, but there is a chance (5) fixes
some unknown/unreported race conditions.
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
commit 0f089147e620e083f58a0e641f701bd4244b455b
Author: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Date: Tue Jan 8 13:02:38 2008 -0200
ACPI: thinkpad-acpi: document keymap gotcha's (v2)
Publish the requirements for keymap changes. This is a documentation
change, only.
Currently, people look at the thinkpad-acpi default keymaps, and think:
"modifying this is a trivial thing, it can't break systems, and there are
keys defined for foo and bar, but the driver has them as KEY_RESERVED.
Must have been an oversight, let me change it."
And since they never get to see the bug reports, because they are not
really a part of the Linux ThinkPad users community (linux-thinkpad
mailinglist, thinkwiki wiki, thinkpad forums) and laptop users are slow
to complain to distros about any breakages...
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
commit f757397097d0713c949af76dccabb65a2785782e
Author: Kevin Hilman <khilman@mvista.com>
Date: Thu Jan 31 17:28:18 2008 -0800
cpuidle: build fix for non-x86
Convert cpu_idle_wait() to cpuidle_kick_cpus() macro which is
SMP-only, and gives error on non supported CPU.
Signed-off-by: Kevin Hilman <khilman@mvista.com>
Acked-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Acked-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Len Brown <len.brown@intel.com>
commit fccd5d00ba68455425a35f905fd92538429c310d
Author: Mattia Dongili <malattia@linux.it>
Date: Mon Jan 14 18:05:46 2008 +0900
sony-laptop: fix scancode decode
compare against the sony_laptop specific event list index
to decode the input scancode to send.
Signed-off-by: Mattia Dongili <malattia@linux.it>
Signed-off-by: Len Brown <len.brown@intel.com>
commit 3eb8749a37990b505ab94466038c067444bbd7eb
Author: Mattia Dongili <malattia@linux.it>
Date: Mon Jan 14 18:05:45 2008 +0900
sony-laptop: add Type4 model
Recent Vaio models (UX, SZ and presumably TZ and others) add more
events and a slightly different handling of Fn key events for
additional hotkeys (s1, s2, zoom-in/out, etc.).
Signed-off-by: Mattia Dongili <malattia@linux.it>
Signed-off-by: Len Brown <len.brown@intel.com>
commit 425ef5d75de25c53b6dc79008fe3678d2fe7e8ed
Author: Mattia Dongili <malattia@linux.it>
Date: Mon Jan 14 18:05:44 2008 +0900
sony-laptop: bump version to 0.6
Signed-off-by: Mattia Dongili <malattia@linux.it>
Signed-off-by: Len Brown <len.brown@intel.com>
commit de9204300112dea10ca3d3cc76858cee61043e47
Author: Mattia Dongili <malattia@linux.it>
Date: Mon Jan 14 18:05:43 2008 +0900
sony-laptop: refactor model types
Create mini drivers and allow callbacks for each model
to be specified.
Following patches will make use of this feature to handle
specific cases instead of just executing code and hope
not to break other models.
Signed-off-by: Mattia Dongili <malattia@linux.it>
Signed-off-by: Len Brown <len.brown@intel.com>
commit 88877c2a2ebd0e554496efb23e7dc8ade661d289
Author: Mattia Dongili <malattia@linux.it>
Date: Mon Jan 14 18:05:42 2008 +0900
sony-laptop: Add Vaio N series to the special init sequence to enable Fn keys
Also the recent Vaio N series need some more calls into the DSDT
to enable reporting of FN key events to be delivered to the SNC device.
Signed-off-by: Mattia Dongili <malattia@linux.it>
Signed-off-by: Len Brown <len.brown@intel.com>
commit 75a1f9ce8f422fd32774a0674ed4386d07628d5e
Author: Mattia Dongili <malattia@linux.it>
Date: Mon Jan 14 18:05:41 2008 +0900
sony-laptop: printk more info in sony_pic_call[123]
Signed-off-by: Mattia Dongili <malattia@linux.it>
Signed-off-by: Len Brown <len.brown@intel.com>
commit 02f8a8586574350a1f3c2cee79cbc0faf630961d
Author: Andrew Patterson <andrew.patterson@hp.com>
Date: Tue Jan 22 17:18:22 2008 -0700
ACPI: Check for any matching CID when walking namespace.
The callback function acpi_ns_get_device_callback called from
acpi_get_devices() will check CID's if the HID does not match. This code
has a bug where it requires that all CIDs match the HID. Changed the code
so that any CID match will do.
Signed-off-by: Andrew Patterson <andrew.patterson@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
commit 856608ee5e1ea37b8976ce01ddbd19a45da88921
Author: Shaohua Li <shaohua.li@intel.com>
Date: Sat Jan 12 19:37:49 2008 -0500
pnp: Failed to activate device 00:0a - Samsung P35 XVM 1600 III
PNP_WRITE requires protocol supports .set. If ACPI doesn't support _SRS, .set ismeanless, so PNP_WRITE.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
commit 37748ebf8888aef6a252016d7c3cdc84514df051
Author: Dave Jones <davej@redhat.com>
Date: Wed Jun 6 03:34:07 2007 -0400
ACPI: remove P2B-S from blacklist.
According to http://bugzilla.kernel.org/show_bug.cgi?id=6933
The latest BIOS for the P2B-S works fine.
Remove it from the blacklist.
Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: Len Brown <len.brown@intel.com>
commit ad3399c378993152f12c23304ee56d7f9108e758
Author: Rafael J. Wysocki <rjw@sisk.pl>
Date: Fri Jan 11 00:10:38 2008 +0100
ACPI: Fix acpi_pm_device_sleep_state()
Fix acpi_pm_device_sleep_state() to return the value returned
by _SxD if the device is supposed to wake up the system from
given sleep state and the evaluation of _SxW fails (e.g. _SxW
is not present).
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Len Brown <len.brown@intel.com>
commit b3b233c7d948a5f55185fb5a1b248157b948a1e5
Author: Alexey Starikovskiy <astarikovskiy@suse.de>
Date: Fri Jan 11 02:42:57 2008 +0300
ACPI: EC: Some hardware requires burst mode to operate properly
Burst mode temporary (50 ms) locks EC to do only transactions with
driver, without it some hardware returns abstract garbage.
Reference: http://bugzilla.kernel.org/show_bug.cgi?id=9341
Signed-off-by: Alexey Starikovskiy <astarikovskiy@suse.de>
Signed-off-by: Len Brown <len.brown@intel.com>
commit 3e71a87d03055de0b8c8e42aba758ee6494af083
Author: Alexey Starikovskiy <astarikovskiy@suse.de>
Date: Fri Jan 11 02:42:51 2008 +0300
ACPI: EC: Do the byte access with a fast path
Specification allows only byte access for EC region, so
make it separate from bug-compatible multi-byte access.
Also do not allow return of garbage in supplied *value.
Reference: http://bugzilla.kernel.org/show_bug.cgi?id=9341
Signed-off-by: Alexey Starikovskiy <astarikovskiy@suse.de>
Signed-off-by: Len Brown <len.brown@intel.com>
commit cfaf3747ff3d431fba33f75083b7f50f58ae22ff
Author: Zhang Rui <rui.zhang@intel.com>
Date: Wed Jan 9 02:17:47 2008 -0500
ACPI: ACPI Exception (): AE_NOT_FOUND, Processor Device is not present
ACPI Exception (acpi_processor-0677): AE_NOT_FOUND, Processor Device is not
present [20060707]
According to the ACPI spec 6.3.7,
"If a device object (including the processor object) does not have an
_STA object, then OSPM assumes that all of the above bits are set,
(in other words, the device is present, enabled, shown in the UI
and funtioning)".
is_processor_present shoud return 1 if the processor device object exists
while it doesn't have an _STA object.
http://bugzilla.kernel.org/show_bug.cgi?id=8570
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
commit 623b78c39c4525731f852072edd742cc4fba6786
Author: Thomas Renninger <trenn@suse.de>
Date: Fri May 18 21:59:28 2007 -0500
ACPI: add "processor.ignore_ppc" hook to workaround BIOS _PPC weirdness
There have been fixes using _PPC, which seem to unhide a problem
on HP nx6125 (double cpufreq switch freezes the machine for
several seconds).
This one should provide a workaround for the nx6125 and for
possible other machines that show any weird _PPC behaviour.
Signed-off-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Len Brown <len.brown@intel.com>
commit 975c30257e75c3d067d4858f60963b80fc6bd0e4
Author: Signed-off by Yi Yang <yi.y.yang@intel.com>
Date: Thu Dec 27 21:50:42 2007 -0500
ACPI: detect invalid argument written to /proc/acpi/alarm
/proc/acpi/alarm can't be set correctly, here is a sample:
[root@localhost /]# echo "2006 09" > /proc/acpi/alarm
[root@localhost /]# cat /proc/acpi/alarm
2007-12-09 09:09:09
[root@localhost /]# echo "2006 04" > /proc/acpi/alarm
[root@localhost /]# cat /proc/acpi/alarm
2007-12-04 04:04:04
[root@localhost /]#
Obviously, it is wrong, it should consider it as an invalid input.
after this patch:
[root@localhost /]# echo "2008 09" > /proc/acpi/alarm
-bash: echo: write error: Invalid argument
[root@localhost /]#
Signed-off-by: Yi Yang <yi.y.yang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
commit 087980295082ccaa816330bc69c29a2ff53a244c
Author: Yi Yang <yi.y.yang@intel.com>
Date: Thu Dec 27 22:04:26 2007 -0500
ACPI: /proc/acpi/alarm parsing: handle large numbers properly
In function acpi_system_write_alarm in file drivers/acpi/sleep/proc.c,
big sec, min, hr, mo, day and yr are counted twice to get reasonable
values, that is very superfluous, we can do that only once.
In additon, /proc/acpi/alarm can set a related value which can be
specified as YYYY years MM months DD days HH hours MM minutes SS
senconds, it isn't a date, so you can specify as +0000-00-00 96:00:00
, that means 3 days later, current code can't handle such a case.
This patch removes unnecessary code and does with the aforementioned
situation.
Before applying this patch:
[root@localhost /]# cat /proc/acpi/alarm
2007-12-00 00:00:00
[root@localhost /]# echo "0000-00-00 96:180:180" > /proc/acpi/alarm
[root@localhost /]# cat /proc/acpi/alarm
0007-12-02 **:**:**
[root@localhost /]#
After applying this patch:
[root@localhost ~]# echo "2007-12-00 00:00:00" > /proc/acpi/alarm
[root@localhost ~]# cat /proc/acpi/alarm
2007-12-00 00:00:00
[root@localhost ~]# echo "0000-00-00 96:180:180" > /proc/acpi/alarm
[root@localhost ~]# cat /proc/acpi/alarm
0007-12-04 03:03:00
[root@localhost ~]#
Signed-off-by: Yi Yang <yi.y.yang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
commit 239665a3bb0a2234980f918913add31bc536cfd1
Author: Len Brown <len.brown@intel.com>
Date: Fri Nov 23 20:08:02 2007 -0500
ACPI: tables: complete searching upon RSDP w/ bad checksum.
ACPI tables follow a tree structure in memory.
The root of the tree is the RSDP (Root System Description Pointer).
To find the RSDP, the OS searches for the signature "RSD PTR "
in well known physical memory locations. Then the OS computes
a table checksum to verify that the signature is really part
of a valid table header.
Some systems have a proper signature but an invalid checksum;
followed elsewhere by a proper signature with valid checksum.
http://bugzilla.kernel.org/show_bug.cgi?id=9444
The Linux RSDP scanning code bailed out on those systems
and as a result they booted with ACPI disabled.
Fix this by deleting the Linux RSDP scanning code and
plugging in the ACPICA RSDP scanning code.
Signed-off-by: Len Brown <len.brown@intel.com>
commit 25de5718356e264820625600a9edca1df5ff26f8
Author: Len Brown <len.brown@intel.com>
Date: Fri Dec 14 00:24:15 2007 -0500
cpuidle: default processor.latency_factor=2
More aggressively request deep C-states.
Note that the job of the OS is to minimize latency
impact to expected break events such as interrupts.
It is not the job of the OS to try to calculate if
the C-state will reach energy break-even.
The platform doesn't give the OS enough information
for it to make that calculation. Thus, it is up
to the platform to decide if it is worth it to
go as deep as the OS requested it to, or if it
should internally demote to a more shallow C-state.
But the converse is not true. The platform can not
promote into a deeper C-state than the OS requested
else it may violate latency constraints. So it is
important that the OS be aggressive in giving the
platform permission to enter deep C-states.
Signed-off-by: Len Brown <len.brown@intel.com>
commit 4963f62045b64f93c45fbcb6f8f0baf1e3e7a127
Author: Len Brown <len.brown@intel.com>
Date: Thu Dec 13 23:50:45 2007 -0500
cpuidle: create processor.latency_factor tunable
Start with default value of 6, so by default,
there is no functional change in this patch.
Signed-off-by: Len Brown <len.brown@intel.com>
commit 2fdf07417e57136cf6baedf9508e2169a059ebea
Author: Jan Beulich <jbeulich@novell.com>
Date: Thu Dec 13 08:33:59 2007 +0000
acpi: make __acpi_map_table() and __init function
.. as it it used only during early boot.
Signed-off-by: Jan Beulich <jbeulich@novell.com>
arch/ia64/kernel/acpi.c | 2 +-
arch/x86/kernel/acpi/boot.c | 4 ++--
drivers/acpi/osl.c | 3 ++-
3 files changed, 5 insertions(+), 4 deletions(-)
Signed-off-by: Len Brown <len.brown@intel.com>
commit 17196d6e533a5c09ca57bf398099ffa3c13248b1
Author: Thomas Renninger <trenn@suse.de>
Date: Fri Dec 7 13:20:43 2007 +0100
ACPI: Also autoload the bay driver, was forgotten...
Signed-off-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Len Brown <len.brown@intel.com>
commit a340af14b4c08a53c5f7d821d8bd910e17403384
Author: Frank Seidel <fseidel@suse.de>
Date: Fri Dec 7 13:20:42 2007 +0100
ACPI: Add autoload info to dock driver
References: https://bugzilla.novell.com/show_bug.cgi?id=302482
Signed-off-by: Thomas Renninger <trenn@novell.com>
Signed-off-by: Kay Sievers <kasievers@novell.com>
Signed-off-by: Frank Seidel <fseidel@suse.de>
Signed-off-by: Len Brown <len.brown@intel.com>
commit 3620f2f2f39e7870cf1a4fb2e34063a142f28716
Author: Frank Seidel <fseidel@suse.de>
Date: Fri Dec 7 13:20:34 2007 +0100
ACPI: Fix autloading of dock, video, bay and all linux specific HID drivers
References: https://bugzilla.novell.com/show_bug.cgi?id=302482
Due to the new autloading of acpi drivers, the dock driver
wasn't loaded anymore as there is no HID to identify it with
(dock is needed if ACPI has a _DCK method).
This patch is a workaround for this, original by Thomas Renninger,
revised first by Kay Sievers and last by Frank Seidel.
V2 of this patch fixed problems on systems without a defined _CID for
the docking devices.
Signed-off-by: Thomas Renninger <trenn@novell.com>
Signed-off-by: Kay Sievers <kasievers@novell.com>
Signed-off-by: Frank Seidel <fseidel@suse.de>
Signed-off-by: Len Brown <len.brown@intel.com>
commit 223630fe3dc564b94e51ff4eb839828c9083f2f6
Author: Zhang Rui <rui.zhang@intel.com>
Date: Thu Dec 6 23:36:35 2007 -0500
export thermal notification to userspace when nocrt is set
module parameter is used to prevent the thermal_zone action upon
critical trip points.
But exporting this notification to userspace is still useful.
By setting nocrt with this patch applied, ACPI will take no action
but exporting the events to userspace upon critical/hot trip points.
http://bugzilla.kernel.org/show_bug.cgi?id=9139
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
commit 17bc54eef91df29f0a22e8a1562a404cf7a68e74
Author: Alexey Starikovskiy <astarikovskiy@suse.de>
Date: Tue Nov 13 13:05:45 2007 +0300
ACPI: Defer enabling of level GPE until all pending notifies done
Level GPE should not be enabled until all work caused by it is done,
e.g. all Notify() methods are completed.
This can be accomplished by appending enable_gpe function to the end
of notify queue.
Signed-off-by: Alexey Starikovskiy <astarikovskiy@suse.de>
Acked-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
commit ed9cbcd40004904dbe61ccc16d6106a7de38c998
Author: Zhao Yakui <yakui.zhao@intel.com>
Date: Tue Nov 20 14:20:21 2007 -0500
Revert "speedstep-lib.c: fix frequency multiplier for Pentium4 models 0&1"
For P4 model < 2, The MSR_FBC_REGISTER_ID ratio is undefined.
Revert the commit that was added to handle that case,
as it results in random MHz displayed. Something else will
have to be done to properly handle model < 2.
//commit 3e4159ab35c88aef5e063ba78796b277b762a30a
//Author: matthias.christian <matthias.christian>
//Date: Sat Feb 5 23:09:38 2005 +0000
//
// [PATCH] speedstep-lib.c: fix frequency multiplier for Pentium4 models 0&1
//
// The Pentium4 models 0&1 have a longer MSR_EBC_FREQUENCY_ID register as the
// models 2&3, so the bit shift must be bigger.
//
// Signed-off-by: Matthias-Christian Ott <matthias.christian@tiscali.de>
// Signed-off-by: Dominik Brodowski <linux@brodo.de>
// Signed-off-by: Andrew Morton <akpm@osdl.org>
// Signed-off-by: Linus Torvalds <torvalds@osdl.org>
//
// BKrev: 42055232eWM-NgjhZVir44mp5GXktQ
http://bugzilla.kernel.org/show_bug.cgi?id=7186
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
commit a7f9b1f24974da287771e2d70b30d9ca7bd66684
Author: Zhang Rui <rui.zhang@intel.com>
Date: Tue Nov 20 13:38:59 2007 -0500
ACPI: disable stray GPE, prevent ACPI interrupt storm
GPEs are disabled depending on their type --
WAKE, WAKE_RUN, and RUNTIME. An error is returned
if we are asked to disable a GPE that has no type.
But at least one system exists that enables a GPE from AML
that is not the EC GPE, and has no _Lxx/_Exx AML handler,
and is thus never initialized.
In this case, when an external CRT is plugged in,
the GPE fires, we attempt to disable the GPE,
but instead just return an error.
So the GPE stays asserted and an ACPI interrupt storm follows.
The fix is to disable a firing GPE,
even if it comes from outer space.
http://bugzilla.kernel.org/show_bug.cgi?id=6217
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Acked-by: Alexey Starikovskiy <astarikovskiy@suse.de>
Signed-off-by: Len Brown <len.brown@intel.com>
commit 60555e371d56a1e410d9fb6fc68f4e953f8f4109
Author: len.brown@intel.com <len.brown@intel.com>
Date: Mon Nov 19 22:22:37 2007 -0500
ACPI: CONFIG_CPU_IDLE=ACPI by default
In Linux-2.6.24, CPU_IDLE went upstream, default =n.
For Linux-2.6.25, enable it by default on ACPI systems.
For Linux-2.6.26, we plan to enable it always on ACPI systems.
Signed-off-by: Len Brown <len.brown@intel.com>
commit b4d2730a0dda91a43c81a02f5225f5d536cabb09
Author: Len Brown <len.brown@intel.com>
Date: Wed Nov 14 19:53:21 2007 -0500
ACPI: document method tracing hooks
Signed-off-by: Len Brown <len.brown@intel.com>
commit 4169c45f179e285feac6bcf25f4bd0db6b109bab
Author: Zhang Rui <rui.zhang@intel.com>
Date: Wed Nov 14 19:38:40 2007 -0500
ACPI: add control method tracing support
Add debug tracing support during certain AML method execution.
Four more module parameters are created under /sys/module/acpi/parameters/:
trace_method_name: the AML method name that user wants to trace
trace_debug_layer: the temporary debug_layer used when tracing the method.
Using 0xffffffff by default if it is 0.
trace_debug_level: the temporary debug_level used when tracing the method.
Using 0x00ffffff by default if it is 0.
trace_state: The status of the tracing feature.
"enabled" means this feature is enabled
and the AML method is traced every time it's executed.
"1" means this feature is enabled and the AML method
will only be traced during the next execution.
"disabled" means this feature is disabled.
Users can enable/disable this debug tracing feature by
"echo string > /sys/module/acpi/parameters/trace_state".
"string" should be one of "enable", "disable" and "1".
http://bugzilla.kernel.org/show_bug.cgi?id=6629
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2008-02-09 9:04 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
[not found] <200802070450.09098.lenb@kernel.org>
2008-02-09 6:34 ` [GIT PATCH] ACPI patches for 2.6.25-rc0 Ingo Molnar
[not found] ` <20080209063439.GA19995@elte.hu>
2008-02-09 6:36 ` Ingo Molnar
[not found] ` <20080209063619.GA20225@elte.hu>
2008-02-09 8:27 ` Ingo Molnar
[not found] ` <20080209082748.GA7792@elte.hu>
2008-02-09 8:31 ` Ingo Molnar
[not found] ` <20080209083143.GA9634@elte.hu>
2008-02-09 9:04 ` Len Brown
2008-02-07 9:50 Len Brown
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).