* [PATCH v3 0/5] Add QCS404 interconnect provider driver
@ 2019-06-11 16:41 Georgi Djakov
2019-06-11 16:41 ` [PATCH v3 1/5] dt-bindings: interconnect: Add Qualcomm QCS404 DT bindings Georgi Djakov
` (4 more replies)
0 siblings, 5 replies; 11+ messages in thread
From: Georgi Djakov @ 2019-06-11 16:41 UTC (permalink / raw)
To: robh+dt, bjorn.andersson, agross, georgi.djakov
Cc: vkoul, evgreen, daidavid1, linux-pm, devicetree, linux-kernel,
linux-arm-msm
Add drivers to support scaling of the on-chip interconnects on QCS404-based
platforms. Also add the necessary device-tree nodes, so that the driver for
each NoC can probe and register as interconnect-provider.
v3:
- Drop the patch introducing the qcom,qos DT property.
- Add two new patches to create an interconnect proxy device. This device is
part of the RPM hardware and handles the communication of the bus bandwidth
requests.
- Add a DT reg property and move the interconnect nodes under the "soc" node.
v2: https://lore.kernel.org/lkml/20190415104357.5305-1-georgi.djakov@linaro.org/
- Use the clk_bulk API. (Bjorn)
- Move the port IDs into the provider file. (Bjorn)
- Use ARRAY_SIZE in the macro to automagically count the num_links. (Bjorn)
- Improve code readability. (Bjorn)
- Add patch [4/4] introducing a qcom,qos DT property to represent the link to
the MMIO QoS registers HW block.
v1: https://lore.kernel.org/lkml/20190405035446.31886-1-georgi.djakov@linaro.org/
Bjorn Andersson (1):
interconnect: qcom: Add QCS404 interconnect provider driver
Georgi Djakov (4):
dt-bindings: interconnect: Add Qualcomm QCS404 DT bindings
soc: qcom: smd-rpm: Create RPM interconnect proxy child device
interconnect: qcom: Add interconnect SMD over SMD driver
arm64: dts: qcs404: Add interconnect provider DT nodes
.../bindings/interconnect/qcom,qcs404.txt | 46 ++
arch/arm64/boot/dts/qcom/qcs404.dtsi | 28 +
drivers/interconnect/qcom/Kconfig | 17 +
drivers/interconnect/qcom/Makefile | 4 +
drivers/interconnect/qcom/qcs404.c | 539 ++++++++++++++++++
drivers/interconnect/qcom/smd-rpm.c | 72 +++
drivers/interconnect/qcom/smd-rpm.h | 15 +
drivers/soc/qcom/smd-rpm.c | 17 +-
.../dt-bindings/interconnect/qcom,qcs404.h | 88 +++
9 files changed, 825 insertions(+), 1 deletion(-)
create mode 100644 Documentation/devicetree/bindings/interconnect/qcom,qcs404.txt
create mode 100644 drivers/interconnect/qcom/qcs404.c
create mode 100644 drivers/interconnect/qcom/smd-rpm.c
create mode 100644 drivers/interconnect/qcom/smd-rpm.h
create mode 100644 include/dt-bindings/interconnect/qcom,qcs404.h
^ permalink raw reply [flat|nested] 11+ messages in thread* [PATCH v3 1/5] dt-bindings: interconnect: Add Qualcomm QCS404 DT bindings 2019-06-11 16:41 [PATCH v3 0/5] Add QCS404 interconnect provider driver Georgi Djakov @ 2019-06-11 16:41 ` Georgi Djakov 2019-06-11 23:08 ` Bjorn Andersson 2019-06-11 16:41 ` [PATCH v3 2/5] interconnect: qcom: Add QCS404 interconnect provider driver Georgi Djakov ` (3 subsequent siblings) 4 siblings, 1 reply; 11+ messages in thread From: Georgi Djakov @ 2019-06-11 16:41 UTC (permalink / raw) To: robh+dt, bjorn.andersson, agross, georgi.djakov Cc: vkoul, evgreen, daidavid1, linux-pm, devicetree, linux-kernel, linux-arm-msm The Qualcomm QCS404 platform has several buses that could be controlled and tuned according to the bandwidth demand. Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> --- v3: - Add a reg property and move the interconnect nodes under the "soc" node. v2: - No changes. .../bindings/interconnect/qcom,qcs404.txt | 46 +++++++++++++++++++ 1 file changed, 46 insertions(+) create mode 100644 Documentation/devicetree/bindings/interconnect/qcom,qcs404.txt diff --git a/Documentation/devicetree/bindings/interconnect/qcom,qcs404.txt b/Documentation/devicetree/bindings/interconnect/qcom,qcs404.txt new file mode 100644 index 000000000000..14a827268dda --- /dev/null +++ b/Documentation/devicetree/bindings/interconnect/qcom,qcs404.txt @@ -0,0 +1,46 @@ +Qualcomm QCS404 Network-On-Chip interconnect driver binding +----------------------------------------------------------- + +Required properties : +- compatible : shall contain only one of the following: + "qcom,qcs404-bimc" + "qcom,qcs404-pcnoc" + "qcom,qcs404-snoc" +- #interconnect-cells : should contain 1 + +Optional properties : +reg : specifies the physical base address and size of registers +clocks : list of phandles and specifiers to all interconnect bus clocks +clock-names : clock names should include both "bus_clk" and "bus_a_clk" + +Example: + +soc { + ... + bimc: interconnect@400000 { + reg = <0x00400000 0x80000>; + compatible = "qcom,qcs404-bimc"; + #interconnect-cells = <1>; + clock-names = "bus_clk", "bus_a_clk"; + clocks = <&rpmcc RPM_SMD_BIMC_CLK>, + <&rpmcc RPM_SMD_BIMC_A_CLK>; + }; + + pnoc: interconnect@500000 { + reg = <0x00500000 0x15080>; + compatible = "qcom,qcs404-pcnoc"; + #interconnect-cells = <1>; + clock-names = "bus_clk", "bus_a_clk"; + clocks = <&rpmcc RPM_SMD_PNOC_CLK>, + <&rpmcc RPM_SMD_PNOC_A_CLK>; + }; + + snoc: interconnect@580000 { + reg = <0x00580000 0x23080>; + compatible = "qcom,qcs404-snoc"; + #interconnect-cells = <1>; + clock-names = "bus_clk", "bus_a_clk"; + clocks = <&rpmcc RPM_SMD_SNOC_CLK>, + <&rpmcc RPM_SMD_SNOC_A_CLK>; + }; +}; ^ permalink raw reply related [flat|nested] 11+ messages in thread
* Re: [PATCH v3 1/5] dt-bindings: interconnect: Add Qualcomm QCS404 DT bindings 2019-06-11 16:41 ` [PATCH v3 1/5] dt-bindings: interconnect: Add Qualcomm QCS404 DT bindings Georgi Djakov @ 2019-06-11 23:08 ` Bjorn Andersson 0 siblings, 0 replies; 11+ messages in thread From: Bjorn Andersson @ 2019-06-11 23:08 UTC (permalink / raw) To: Georgi Djakov Cc: robh+dt, agross, vkoul, evgreen, daidavid1, linux-pm, devicetree, linux-kernel, linux-arm-msm On Tue 11 Jun 09:41 PDT 2019, Georgi Djakov wrote: > The Qualcomm QCS404 platform has several buses that could be controlled > and tuned according to the bandwidth demand. > Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> > Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> > --- > > v3: > - Add a reg property and move the interconnect nodes under the "soc" node. > > v2: > - No changes. > > .../bindings/interconnect/qcom,qcs404.txt | 46 +++++++++++++++++++ > 1 file changed, 46 insertions(+) > create mode 100644 Documentation/devicetree/bindings/interconnect/qcom,qcs404.txt > > diff --git a/Documentation/devicetree/bindings/interconnect/qcom,qcs404.txt b/Documentation/devicetree/bindings/interconnect/qcom,qcs404.txt > new file mode 100644 > index 000000000000..14a827268dda > --- /dev/null > +++ b/Documentation/devicetree/bindings/interconnect/qcom,qcs404.txt > @@ -0,0 +1,46 @@ > +Qualcomm QCS404 Network-On-Chip interconnect driver binding > +----------------------------------------------------------- > + > +Required properties : > +- compatible : shall contain only one of the following: > + "qcom,qcs404-bimc" > + "qcom,qcs404-pcnoc" > + "qcom,qcs404-snoc" > +- #interconnect-cells : should contain 1 > + > +Optional properties : > +reg : specifies the physical base address and size of registers > +clocks : list of phandles and specifiers to all interconnect bus clocks > +clock-names : clock names should include both "bus_clk" and "bus_a_clk" > + > +Example: > + > +soc { > + ... > + bimc: interconnect@400000 { > + reg = <0x00400000 0x80000>; > + compatible = "qcom,qcs404-bimc"; > + #interconnect-cells = <1>; > + clock-names = "bus_clk", "bus_a_clk"; > + clocks = <&rpmcc RPM_SMD_BIMC_CLK>, > + <&rpmcc RPM_SMD_BIMC_A_CLK>; > + }; > + > + pnoc: interconnect@500000 { > + reg = <0x00500000 0x15080>; > + compatible = "qcom,qcs404-pcnoc"; > + #interconnect-cells = <1>; > + clock-names = "bus_clk", "bus_a_clk"; > + clocks = <&rpmcc RPM_SMD_PNOC_CLK>, > + <&rpmcc RPM_SMD_PNOC_A_CLK>; > + }; > + > + snoc: interconnect@580000 { > + reg = <0x00580000 0x23080>; > + compatible = "qcom,qcs404-snoc"; > + #interconnect-cells = <1>; > + clock-names = "bus_clk", "bus_a_clk"; > + clocks = <&rpmcc RPM_SMD_SNOC_CLK>, > + <&rpmcc RPM_SMD_SNOC_A_CLK>; > + }; > +}; ^ permalink raw reply [flat|nested] 11+ messages in thread
* [PATCH v3 2/5] interconnect: qcom: Add QCS404 interconnect provider driver 2019-06-11 16:41 [PATCH v3 0/5] Add QCS404 interconnect provider driver Georgi Djakov 2019-06-11 16:41 ` [PATCH v3 1/5] dt-bindings: interconnect: Add Qualcomm QCS404 DT bindings Georgi Djakov @ 2019-06-11 16:41 ` Georgi Djakov 2019-06-11 23:34 ` Bjorn Andersson 2019-06-11 16:41 ` [PATCH v3 3/5] soc: qcom: smd-rpm: Create RPM interconnect proxy child device Georgi Djakov ` (2 subsequent siblings) 4 siblings, 1 reply; 11+ messages in thread From: Georgi Djakov @ 2019-06-11 16:41 UTC (permalink / raw) To: robh+dt, bjorn.andersson, agross, georgi.djakov Cc: vkoul, evgreen, daidavid1, linux-pm, devicetree, linux-kernel, linux-arm-msm From: Bjorn Andersson <bjorn.andersson@linaro.org> Add driver for the interconnect buses found in Qualcomm QCS404-based platforms. The topology consists of three NoCs that are controlled by a remote processor. This remote processor collects the aggregated bandwidth for each master-slave pairs. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> --- v3: - Converted the #defines into enum. (Bjorn) - Moved the rpm-smd part into a separate interconnect proxy driver. v2: - Use the clk_bulk API. (Bjorn) - Move the port IDs into the provider file. (Bjorn) - Use ARRAY_SIZE in the macro to automagically count the num_links. (Bjorn) - Improve code readability. (Bjorn) drivers/interconnect/qcom/Kconfig | 8 + drivers/interconnect/qcom/Makefile | 2 + drivers/interconnect/qcom/qcs404.c | 539 ++++++++++++++++++ .../dt-bindings/interconnect/qcom,qcs404.h | 88 +++ 4 files changed, 637 insertions(+) create mode 100644 drivers/interconnect/qcom/qcs404.c create mode 100644 include/dt-bindings/interconnect/qcom,qcs404.h diff --git a/drivers/interconnect/qcom/Kconfig b/drivers/interconnect/qcom/Kconfig index d5e70ebc2410..e76e3e248c41 100644 --- a/drivers/interconnect/qcom/Kconfig +++ b/drivers/interconnect/qcom/Kconfig @@ -5,6 +5,14 @@ config INTERCONNECT_QCOM help Support for Qualcomm's Network-on-Chip interconnect hardware. +config INTERCONNECT_QCOM_QCS404 + tristate "Qualcomm QCS404 interconnect driver" + depends on INTERCONNECT_QCOM + depends on QCOM_SMD_RPM || COMPILE_TEST + help + This is a driver for the Qualcomm Network-on-Chip on qcs404-based + platforms. + config INTERCONNECT_QCOM_SDM845 tristate "Qualcomm SDM845 interconnect driver" depends on INTERCONNECT_QCOM diff --git a/drivers/interconnect/qcom/Makefile b/drivers/interconnect/qcom/Makefile index 1c1cea690f92..059ff325ee6c 100644 --- a/drivers/interconnect/qcom/Makefile +++ b/drivers/interconnect/qcom/Makefile @@ -1,5 +1,7 @@ # SPDX-License-Identifier: GPL-2.0 +qnoc-qcs404-objs := qcs404.o qnoc-sdm845-objs := sdm845.o +obj-$(CONFIG_INTERCONNECT_QCOM_QCS404) += qnoc-qcs404.o obj-$(CONFIG_INTERCONNECT_QCOM_SDM845) += qnoc-sdm845.o diff --git a/drivers/interconnect/qcom/qcs404.c b/drivers/interconnect/qcom/qcs404.c new file mode 100644 index 000000000000..99be0928e2ad --- /dev/null +++ b/drivers/interconnect/qcom/qcs404.c @@ -0,0 +1,539 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2019 Linaro Ltd + */ + +#include <dt-bindings/interconnect/qcom,qcs404.h> +#include <linux/clk.h> +#include <linux/device.h> +#include <linux/interconnect-provider.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/of_device.h> +#include <linux/of_platform.h> +#include <linux/platform_device.h> +#include <linux/slab.h> + +#include "smd-rpm.h" + +#define RPM_BUS_MASTER_REQ 0x73616d62 +#define RPM_BUS_SLAVE_REQ 0x766c7362 + +enum { + QCS404_MASTER_AMPSS_M0 = 1, + QCS404_MASTER_GRAPHICS_3D, + QCS404_MASTER_MDP_PORT0, + QCS404_SNOC_BIMC_1_MAS, + QCS404_MASTER_TCU_0, + QCS404_MASTER_SPDM, + QCS404_MASTER_BLSP_1, + QCS404_MASTER_BLSP_2, + QCS404_MASTER_XM_USB_HS1, + QCS404_MASTER_CRYPTO_CORE0, + QCS404_MASTER_SDCC_1, + QCS404_MASTER_SDCC_2, + QCS404_SNOC_PNOC_MAS, + QCS404_MASTER_QPIC, + QCS404_MASTER_QDSS_BAM, + QCS404_BIMC_SNOC_MAS, + QCS404_PNOC_SNOC_MAS, + QCS404_MASTER_QDSS_ETR, + QCS404_MASTER_EMAC, + QCS404_MASTER_PCIE, + QCS404_MASTER_USB3, + QCS404_PNOC_INT_0, + QCS404_PNOC_INT_2, + QCS404_PNOC_INT_3, + QCS404_PNOC_SLV_0, + QCS404_PNOC_SLV_1, + QCS404_PNOC_SLV_2, + QCS404_PNOC_SLV_3, + QCS404_PNOC_SLV_4, + QCS404_PNOC_SLV_6, + QCS404_PNOC_SLV_7, + QCS404_PNOC_SLV_8, + QCS404_PNOC_SLV_9, + QCS404_PNOC_SLV_10, + QCS404_PNOC_SLV_11, + QCS404_SNOC_QDSS_INT, + QCS404_SNOC_INT_0, + QCS404_SNOC_INT_1, + QCS404_SNOC_INT_2, + QCS404_SLAVE_EBI_CH0, + QCS404_BIMC_SNOC_SLV, + QCS404_SLAVE_SPDM_WRAPPER, + QCS404_SLAVE_PDM, + QCS404_SLAVE_PRNG, + QCS404_SLAVE_TCSR, + QCS404_SLAVE_SNOC_CFG, + QCS404_SLAVE_MESSAGE_RAM, + QCS404_SLAVE_DISPLAY_CFG, + QCS404_SLAVE_GRAPHICS_3D_CFG, + QCS404_SLAVE_BLSP_1, + QCS404_SLAVE_TLMM_NORTH, + QCS404_SLAVE_PCIE_1, + QCS404_SLAVE_EMAC_CFG, + QCS404_SLAVE_BLSP_2, + QCS404_SLAVE_TLMM_EAST, + QCS404_SLAVE_TCU, + QCS404_SLAVE_PMIC_ARB, + QCS404_SLAVE_SDCC_1, + QCS404_SLAVE_SDCC_2, + QCS404_SLAVE_TLMM_SOUTH, + QCS404_SLAVE_USB_HS, + QCS404_SLAVE_USB3, + QCS404_SLAVE_CRYPTO_0_CFG, + QCS404_PNOC_SNOC_SLV, + QCS404_SLAVE_APPSS, + QCS404_SLAVE_WCSS, + QCS404_SNOC_BIMC_1_SLV, + QCS404_SLAVE_OCIMEM, + QCS404_SNOC_PNOC_SLV, + QCS404_SLAVE_QDSS_STM, + QCS404_SLAVE_CATS_128, + QCS404_SLAVE_OCMEM_64, + QCS404_SLAVE_LPASS, +}; + +#define to_qcom_provider(_provider) \ + container_of(_provider, struct qcom_icc_provider, provider) + +static const struct clk_bulk_data bus_clocks[] = { + { .id = "bus_clk" }, + { .id = "bus_a_clk" }, +}; + +/** + * struct qcom_icc_provider - Qualcomm specific interconnect provider + * @provider: generic interconnect provider + * @bus_clks: the clk_bulk_data table of bus clocks + * @num_clks: the total number of clk_bulk_data entries + */ +struct qcom_icc_provider { + struct icc_provider provider; + struct clk_bulk_data *bus_clks; + int num_clks; +}; + +#define QCS404_MAX_LINKS 12 + +/** + * struct qcom_icc_node - Qualcomm specific interconnect nodes + * @name: the node name used in debugfs + * @id: a unique node identifier + * @links: an array of nodes where we can go next while traversing + * @num_links: the total number of @links + * @buswidth: width of the interconnect between a node and the bus (bytes) + * @mas_rpm_id: RPM id for devices that are bus masters + * @slv_rpm_id: RPM id for devices that are bus slaves + * @rate: current bus clock rate in Hz + */ +struct qcom_icc_node { + unsigned char *name; + u16 id; + u16 links[QCS404_MAX_LINKS]; + u16 num_links; + u16 buswidth; + int mas_rpm_id; + int slv_rpm_id; + u64 rate; +}; + +struct qcom_icc_desc { + struct qcom_icc_node **nodes; + size_t num_nodes; +}; + +#define DEFINE_QNODE(_name, _id, _buswidth, _mas_rpm_id, _slv_rpm_id, \ + ...) \ + static struct qcom_icc_node _name = { \ + .name = #_name, \ + .id = _id, \ + .buswidth = _buswidth, \ + .mas_rpm_id = _mas_rpm_id, \ + .slv_rpm_id = _slv_rpm_id, \ + .num_links = ARRAY_SIZE(((int[]){ __VA_ARGS__ })), \ + .links = { __VA_ARGS__ }, \ + } + +DEFINE_QNODE(mas_apps_proc, QCS404_MASTER_AMPSS_M0, 8, 0, -1, QCS404_SLAVE_EBI_CH0, QCS404_BIMC_SNOC_SLV); +DEFINE_QNODE(mas_oxili, QCS404_MASTER_GRAPHICS_3D, 8, 6, -1, QCS404_SLAVE_EBI_CH0, QCS404_BIMC_SNOC_SLV); +DEFINE_QNODE(mas_mdp, QCS404_MASTER_MDP_PORT0, 8, 8, -1, QCS404_SLAVE_EBI_CH0, QCS404_BIMC_SNOC_SLV); +DEFINE_QNODE(mas_snoc_bimc_1, QCS404_SNOC_BIMC_1_MAS, 8, 76, -1, QCS404_SLAVE_EBI_CH0); +DEFINE_QNODE(mas_tcu_0, QCS404_MASTER_TCU_0, 8, -1, -1, QCS404_SLAVE_EBI_CH0, QCS404_BIMC_SNOC_SLV); +DEFINE_QNODE(mas_spdm, QCS404_MASTER_SPDM, 4, -1, -1, QCS404_PNOC_INT_3); +DEFINE_QNODE(mas_blsp_1, QCS404_MASTER_BLSP_1, 4, 41, -1, QCS404_PNOC_INT_3); +DEFINE_QNODE(mas_blsp_2, QCS404_MASTER_BLSP_2, 4, 39, -1, QCS404_PNOC_INT_3); +DEFINE_QNODE(mas_xi_usb_hs1, QCS404_MASTER_XM_USB_HS1, 8, 138, -1, QCS404_PNOC_INT_0); +DEFINE_QNODE(mas_crypto, QCS404_MASTER_CRYPTO_CORE0, 8, 23, -1, QCS404_PNOC_SNOC_SLV, QCS404_PNOC_INT_2); +DEFINE_QNODE(mas_sdcc_1, QCS404_MASTER_SDCC_1, 8, 33, -1, QCS404_PNOC_INT_0); +DEFINE_QNODE(mas_sdcc_2, QCS404_MASTER_SDCC_2, 8, 35, -1, QCS404_PNOC_INT_0); +DEFINE_QNODE(mas_snoc_pcnoc, QCS404_SNOC_PNOC_MAS, 8, 77, -1, QCS404_PNOC_INT_2); +DEFINE_QNODE(mas_qpic, QCS404_MASTER_QPIC, 4, -1, -1, QCS404_PNOC_INT_0); +DEFINE_QNODE(mas_qdss_bam, QCS404_MASTER_QDSS_BAM, 4, -1, -1, QCS404_SNOC_QDSS_INT); +DEFINE_QNODE(mas_bimc_snoc, QCS404_BIMC_SNOC_MAS, 8, 21, -1, QCS404_SLAVE_OCMEM_64, QCS404_SLAVE_CATS_128, QCS404_SNOC_INT_0, QCS404_SNOC_INT_1); +DEFINE_QNODE(mas_pcnoc_snoc, QCS404_PNOC_SNOC_MAS, 8, 29, -1, QCS404_SNOC_BIMC_1_SLV, QCS404_SNOC_INT_2, QCS404_SNOC_INT_0); +DEFINE_QNODE(mas_qdss_etr, QCS404_MASTER_QDSS_ETR, 8, -1, -1, QCS404_SNOC_QDSS_INT); +DEFINE_QNODE(mas_emac, QCS404_MASTER_EMAC, 8, -1, -1, QCS404_SNOC_BIMC_1_SLV, QCS404_SNOC_INT_1); +DEFINE_QNODE(mas_pcie, QCS404_MASTER_PCIE, 8, -1, -1, QCS404_SNOC_BIMC_1_SLV, QCS404_SNOC_INT_1); +DEFINE_QNODE(mas_usb3, QCS404_MASTER_USB3, 8, -1, -1, QCS404_SNOC_BIMC_1_SLV, QCS404_SNOC_INT_1); +DEFINE_QNODE(pcnoc_int_0, QCS404_PNOC_INT_0, 8, 85, 114, QCS404_PNOC_SNOC_SLV, QCS404_PNOC_INT_2); +DEFINE_QNODE(pcnoc_int_2, QCS404_PNOC_INT_2, 8, 124, 184, QCS404_PNOC_SLV_10, QCS404_SLAVE_TCU, QCS404_PNOC_SLV_11, QCS404_PNOC_SLV_2, QCS404_PNOC_SLV_3, QCS404_PNOC_SLV_0, QCS404_PNOC_SLV_1, QCS404_PNOC_SLV_6, QCS404_PNOC_SLV_7, QCS404_PNOC_SLV_4, QCS404_PNOC_SLV_8, QCS404_PNOC_SLV_9); +DEFINE_QNODE(pcnoc_int_3, QCS404_PNOC_INT_3, 8, 125, 185, QCS404_PNOC_SNOC_SLV); +DEFINE_QNODE(pcnoc_s_0, QCS404_PNOC_SLV_0, 4, 89, 118, QCS404_SLAVE_PRNG, QCS404_SLAVE_SPDM_WRAPPER, QCS404_SLAVE_PDM); +DEFINE_QNODE(pcnoc_s_1, QCS404_PNOC_SLV_1, 4, 90, 119, QCS404_SLAVE_TCSR); +DEFINE_QNODE(pcnoc_s_2, QCS404_PNOC_SLV_2, 4, -1, -1, QCS404_SLAVE_GRAPHICS_3D_CFG); +DEFINE_QNODE(pcnoc_s_3, QCS404_PNOC_SLV_3, 4, 92, 121, QCS404_SLAVE_MESSAGE_RAM); +DEFINE_QNODE(pcnoc_s_4, QCS404_PNOC_SLV_4, 4, 93, 122, QCS404_SLAVE_SNOC_CFG); +DEFINE_QNODE(pcnoc_s_6, QCS404_PNOC_SLV_6, 4, 94, 123, QCS404_SLAVE_BLSP_1, QCS404_SLAVE_TLMM_NORTH, QCS404_SLAVE_EMAC_CFG); +DEFINE_QNODE(pcnoc_s_7, QCS404_PNOC_SLV_7, 4, 95, 124, QCS404_SLAVE_TLMM_SOUTH, QCS404_SLAVE_DISPLAY_CFG, QCS404_SLAVE_SDCC_1, QCS404_SLAVE_PCIE_1, QCS404_SLAVE_SDCC_2); +DEFINE_QNODE(pcnoc_s_8, QCS404_PNOC_SLV_8, 4, 96, 125, QCS404_SLAVE_CRYPTO_0_CFG); +DEFINE_QNODE(pcnoc_s_9, QCS404_PNOC_SLV_9, 4, 97, 126, QCS404_SLAVE_BLSP_2, QCS404_SLAVE_TLMM_EAST, QCS404_SLAVE_PMIC_ARB); +DEFINE_QNODE(pcnoc_s_10, QCS404_PNOC_SLV_10, 4, 157, -1, QCS404_SLAVE_USB_HS); +DEFINE_QNODE(pcnoc_s_11, QCS404_PNOC_SLV_11, 4, 158, 246, QCS404_SLAVE_USB3); +DEFINE_QNODE(qdss_int, QCS404_SNOC_QDSS_INT, 8, -1, -1, QCS404_SNOC_BIMC_1_SLV, QCS404_SNOC_INT_1); +DEFINE_QNODE(snoc_int_0, QCS404_SNOC_INT_0, 8, 99, 130, QCS404_SLAVE_LPASS, QCS404_SLAVE_APPSS, QCS404_SLAVE_WCSS); +DEFINE_QNODE(snoc_int_1, QCS404_SNOC_INT_1, 8, 100, 131, QCS404_SNOC_PNOC_SLV, QCS404_SNOC_INT_2); +DEFINE_QNODE(snoc_int_2, QCS404_SNOC_INT_2, 8, 134, 197, QCS404_SLAVE_QDSS_STM, QCS404_SLAVE_OCIMEM); +DEFINE_QNODE(slv_ebi, QCS404_SLAVE_EBI_CH0, 8, -1, 0, 0); +DEFINE_QNODE(slv_bimc_snoc, QCS404_BIMC_SNOC_SLV, 8, -1, 2, QCS404_BIMC_SNOC_MAS); +DEFINE_QNODE(slv_spdm, QCS404_SLAVE_SPDM_WRAPPER, 4, -1, -1, 0); +DEFINE_QNODE(slv_pdm, QCS404_SLAVE_PDM, 4, -1, 41, 0); +DEFINE_QNODE(slv_prng, QCS404_SLAVE_PRNG, 4, -1, 44, 0); +DEFINE_QNODE(slv_tcsr, QCS404_SLAVE_TCSR, 4, -1, 50, 0); +DEFINE_QNODE(slv_snoc_cfg, QCS404_SLAVE_SNOC_CFG, 4, -1, 70, 0); +DEFINE_QNODE(slv_message_ram, QCS404_SLAVE_MESSAGE_RAM, 4, -1, 55, 0); +DEFINE_QNODE(slv_disp_ss_cfg, QCS404_SLAVE_DISPLAY_CFG, 4, -1, -1, 0); +DEFINE_QNODE(slv_gpu_cfg, QCS404_SLAVE_GRAPHICS_3D_CFG, 4, -1, -1, 0); +DEFINE_QNODE(slv_blsp_1, QCS404_SLAVE_BLSP_1, 4, -1, 39, 0); +DEFINE_QNODE(slv_tlmm_north, QCS404_SLAVE_TLMM_NORTH, 4, -1, 214, 0); +DEFINE_QNODE(slv_pcie, QCS404_SLAVE_PCIE_1, 4, -1, -1, 0); +DEFINE_QNODE(slv_ethernet, QCS404_SLAVE_EMAC_CFG, 4, -1, -1, 0); +DEFINE_QNODE(slv_blsp_2, QCS404_SLAVE_BLSP_2, 4, -1, 37, 0); +DEFINE_QNODE(slv_tlmm_east, QCS404_SLAVE_TLMM_EAST, 4, -1, 213, 0); +DEFINE_QNODE(slv_tcu, QCS404_SLAVE_TCU, 8, -1, -1, 0); +DEFINE_QNODE(slv_pmic_arb, QCS404_SLAVE_PMIC_ARB, 4, -1, 59, 0); +DEFINE_QNODE(slv_sdcc_1, QCS404_SLAVE_SDCC_1, 4, -1, 31, 0); +DEFINE_QNODE(slv_sdcc_2, QCS404_SLAVE_SDCC_2, 4, -1, 33, 0); +DEFINE_QNODE(slv_tlmm_south, QCS404_SLAVE_TLMM_SOUTH, 4, -1, -1, 0); +DEFINE_QNODE(slv_usb_hs, QCS404_SLAVE_USB_HS, 4, -1, 40, 0); +DEFINE_QNODE(slv_usb3, QCS404_SLAVE_USB3, 4, -1, 22, 0); +DEFINE_QNODE(slv_crypto_0_cfg, QCS404_SLAVE_CRYPTO_0_CFG, 4, -1, 52, 0); +DEFINE_QNODE(slv_pcnoc_snoc, QCS404_PNOC_SNOC_SLV, 8, -1, 45, QCS404_PNOC_SNOC_MAS); +DEFINE_QNODE(slv_kpss_ahb, QCS404_SLAVE_APPSS, 4, -1, -1, 0); +DEFINE_QNODE(slv_wcss, QCS404_SLAVE_WCSS, 4, -1, 23, 0); +DEFINE_QNODE(slv_snoc_bimc_1, QCS404_SNOC_BIMC_1_SLV, 8, -1, 104, QCS404_SNOC_BIMC_1_MAS); +DEFINE_QNODE(slv_imem, QCS404_SLAVE_OCIMEM, 8, -1, 26, 0); +DEFINE_QNODE(slv_snoc_pcnoc, QCS404_SNOC_PNOC_SLV, 8, -1, 28, QCS404_SNOC_PNOC_MAS); +DEFINE_QNODE(slv_qdss_stm, QCS404_SLAVE_QDSS_STM, 4, -1, 30, 0); +DEFINE_QNODE(slv_cats_0, QCS404_SLAVE_CATS_128, 16, -1, -1, 0); +DEFINE_QNODE(slv_cats_1, QCS404_SLAVE_OCMEM_64, 8, -1, -1, 0); +DEFINE_QNODE(slv_lpass, QCS404_SLAVE_LPASS, 4, -1, -1, 0); + +static struct qcom_icc_node *qcs404_bimc_nodes[] = { + [MASTER_AMPSS_M0] = &mas_apps_proc, + [MASTER_OXILI] = &mas_oxili, + [MASTER_MDP_PORT0] = &mas_mdp, + [MASTER_SNOC_BIMC_1] = &mas_snoc_bimc_1, + [MASTER_TCU_0] = &mas_tcu_0, + [SLAVE_EBI_CH0] = &slv_ebi, + [SLAVE_BIMC_SNOC] = &slv_bimc_snoc, +}; + +static struct qcom_icc_desc qcs404_bimc = { + .nodes = qcs404_bimc_nodes, + .num_nodes = ARRAY_SIZE(qcs404_bimc_nodes), +}; + +static struct qcom_icc_node *qcs404_pcnoc_nodes[] = { + [MASTER_SPDM] = &mas_spdm, + [MASTER_BLSP_1] = &mas_blsp_1, + [MASTER_BLSP_2] = &mas_blsp_2, + [MASTER_XI_USB_HS1] = &mas_xi_usb_hs1, + [MASTER_CRYPT0] = &mas_crypto, + [MASTER_SDCC_1] = &mas_sdcc_1, + [MASTER_SDCC_2] = &mas_sdcc_2, + [MASTER_SNOC_PCNOC] = &mas_snoc_pcnoc, + [MASTER_QPIC] = &mas_qpic, + [PCNOC_INT_0] = &pcnoc_int_0, + [PCNOC_INT_2] = &pcnoc_int_2, + [PCNOC_INT_3] = &pcnoc_int_3, + [PCNOC_S_0] = &pcnoc_s_0, + [PCNOC_S_1] = &pcnoc_s_1, + [PCNOC_S_2] = &pcnoc_s_2, + [PCNOC_S_3] = &pcnoc_s_3, + [PCNOC_S_4] = &pcnoc_s_4, + [PCNOC_S_6] = &pcnoc_s_6, + [PCNOC_S_7] = &pcnoc_s_7, + [PCNOC_S_8] = &pcnoc_s_8, + [PCNOC_S_9] = &pcnoc_s_9, + [PCNOC_S_10] = &pcnoc_s_10, + [PCNOC_S_11] = &pcnoc_s_11, + [SLAVE_SPDM] = &slv_spdm, + [SLAVE_PDM] = &slv_pdm, + [SLAVE_PRNG] = &slv_prng, + [SLAVE_TCSR] = &slv_tcsr, + [SLAVE_SNOC_CFG] = &slv_snoc_cfg, + [SLAVE_MESSAGE_RAM] = &slv_message_ram, + [SLAVE_DISP_SS_CFG] = &slv_disp_ss_cfg, + [SLAVE_GPU_CFG] = &slv_gpu_cfg, + [SLAVE_BLSP_1] = &slv_blsp_1, + [SLAVE_BLSP_2] = &slv_blsp_2, + [SLAVE_TLMM_NORTH] = &slv_tlmm_north, + [SLAVE_PCIE] = &slv_pcie, + [SLAVE_ETHERNET] = &slv_ethernet, + [SLAVE_TLMM_EAST] = &slv_tlmm_east, + [SLAVE_TCU] = &slv_tcu, + [SLAVE_PMIC_ARB] = &slv_pmic_arb, + [SLAVE_SDCC_1] = &slv_sdcc_1, + [SLAVE_SDCC_2] = &slv_sdcc_2, + [SLAVE_TLMM_SOUTH] = &slv_tlmm_south, + [SLAVE_USB_HS] = &slv_usb_hs, + [SLAVE_USB3] = &slv_usb3, + [SLAVE_CRYPTO_0_CFG] = &slv_crypto_0_cfg, + [SLAVE_PCNOC_SNOC] = &slv_pcnoc_snoc, +}; + +static struct qcom_icc_desc qcs404_pcnoc = { + .nodes = qcs404_pcnoc_nodes, + .num_nodes = ARRAY_SIZE(qcs404_pcnoc_nodes), +}; + +static struct qcom_icc_node *qcs404_snoc_nodes[] = { + [MASTER_QDSS_BAM] = &mas_qdss_bam, + [MASTER_BIMC_SNOC] = &mas_bimc_snoc, + [MASTER_PCNOC_SNOC] = &mas_pcnoc_snoc, + [MASTER_QDSS_ETR] = &mas_qdss_etr, + [MASTER_EMAC] = &mas_emac, + [MASTER_PCIE] = &mas_pcie, + [MASTER_USB3] = &mas_usb3, + [QDSS_INT] = &qdss_int, + [SNOC_INT_0] = &snoc_int_0, + [SNOC_INT_1] = &snoc_int_1, + [SNOC_INT_2] = &snoc_int_2, + [SLAVE_KPSS_AHB] = &slv_kpss_ahb, + [SLAVE_WCSS] = &slv_wcss, + [SLAVE_SNOC_BIMC_1] = &slv_snoc_bimc_1, + [SLAVE_IMEM] = &slv_imem, + [SLAVE_SNOC_PCNOC] = &slv_snoc_pcnoc, + [SLAVE_QDSS_STM] = &slv_qdss_stm, + [SLAVE_CATS_0] = &slv_cats_0, + [SLAVE_CATS_1] = &slv_cats_1, + [SLAVE_LPASS] = &slv_lpass, +}; + +static struct qcom_icc_desc qcs404_snoc = { + .nodes = qcs404_snoc_nodes, + .num_nodes = ARRAY_SIZE(qcs404_snoc_nodes), +}; + +static int qcom_icc_aggregate(struct icc_node *node, u32 avg_bw, u32 peak_bw, + u32 *agg_avg, u32 *agg_peak) +{ + *agg_avg += avg_bw; + *agg_peak = max(*agg_peak, peak_bw); + + return 0; +} + +static int qcom_icc_set(struct icc_node *src, struct icc_node *dst) +{ + struct qcom_icc_provider *qp; + struct qcom_icc_node *qn; + struct icc_provider *provider; + struct icc_node *n; + u64 sum_bw; + u64 max_peak_bw; + u64 rate; + u32 agg_avg = 0; + u32 agg_peak = 0; + int ret, i; + + qn = src->data; + provider = src->provider; + qp = to_qcom_provider(provider); + + list_for_each_entry(n, &provider->nodes, node_list) + qcom_icc_aggregate(n, n->avg_bw, n->peak_bw, + &agg_avg, &agg_peak); + + sum_bw = icc_units_to_bps(agg_avg); + max_peak_bw = icc_units_to_bps(agg_peak); + + /* send bandwidth request message to the RPM processor */ + if (qn->mas_rpm_id != -1) { + ret = qcom_icc_rpm_smd_send(QCOM_SMD_RPM_ACTIVE_STATE, + RPM_BUS_MASTER_REQ, + qn->mas_rpm_id, + sum_bw); + if (ret) { + pr_err("qcom_icc_rpm_smd_send mas %d error %d\n", + qn->mas_rpm_id, ret); + return ret; + } + } + + if (qn->slv_rpm_id != -1) { + ret = qcom_icc_rpm_smd_send(QCOM_SMD_RPM_ACTIVE_STATE, + RPM_BUS_SLAVE_REQ, + qn->slv_rpm_id, + sum_bw); + if (ret) { + pr_err("qcom_icc_rpm_smd_send slv error %d\n", + ret); + return ret; + } + } + + rate = max(sum_bw, max_peak_bw); + + do_div(rate, qn->buswidth); + + if (qn->rate == rate) + return 0; + + for (i = 0; i < qp->num_clks; i++) { + ret = clk_set_rate(qp->bus_clks[i].clk, rate); + if (ret) { + pr_err("%s clk_set_rate error: %d\n", + qp->bus_clks[i].id, ret); + return ret; + } + } + + qn->rate = rate; + + return 0; +} + +static int qnoc_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + const struct qcom_icc_desc *desc; + struct icc_onecell_data *data; + struct icc_provider *provider; + struct qcom_icc_node **qnodes; + struct qcom_icc_provider *qp; + struct icc_node *node; + size_t num_nodes, i; + int ret; + + /* wait for the RPM proxy */ + if (!qcom_icc_rpm_smd_available()) + return -EPROBE_DEFER; + + desc = of_device_get_match_data(dev); + if (!desc) + return -EINVAL; + + qnodes = desc->nodes; + num_nodes = desc->num_nodes; + + qp = devm_kzalloc(dev, sizeof(*qp), GFP_KERNEL); + if (!qp) + return -ENOMEM; + + data = devm_kcalloc(dev, num_nodes, sizeof(*node), GFP_KERNEL); + if (!data) + return -ENOMEM; + + qp->bus_clks = devm_kmemdup(dev, bus_clocks, sizeof(bus_clocks), + GFP_KERNEL); + if (!qp->bus_clks) + return -ENOMEM; + + qp->num_clks = ARRAY_SIZE(bus_clocks); + ret = devm_clk_bulk_get(dev, qp->num_clks, qp->bus_clks); + if (ret) + return ret; + + ret = clk_bulk_prepare_enable(qp->num_clks, qp->bus_clks); + if (ret) + return ret; + + provider = &qp->provider; + INIT_LIST_HEAD(&provider->nodes); + provider->dev = dev; + provider->set = qcom_icc_set; + provider->aggregate = qcom_icc_aggregate; + provider->xlate = of_icc_xlate_onecell; + provider->data = data; + + ret = icc_provider_add(provider); + if (ret) { + dev_err(dev, "error adding interconnect provider: %d\n", ret); + clk_bulk_disable_unprepare(qp->num_clks, qp->bus_clks); + return ret; + } + + for (i = 0; i < num_nodes; i++) { + size_t j; + + node = icc_node_create(qnodes[i]->id); + if (IS_ERR(node)) { + ret = PTR_ERR(node); + goto err; + } + + node->name = qnodes[i]->name; + node->data = qnodes[i]; + icc_node_add(node, provider); + + dev_dbg(dev, "registered node %s\n", node->name); + + /* populate links */ + for (j = 0; j < qnodes[i]->num_links; j++) + icc_link_create(node, qnodes[i]->links[j]); + + data->nodes[i] = node; + } + data->num_nodes = num_nodes; + + platform_set_drvdata(pdev, qp); + + return 0; +err: + list_for_each_entry(node, &provider->nodes, node_list) { + icc_node_del(node); + icc_node_destroy(node->id); + } + clk_bulk_disable_unprepare(qp->num_clks, qp->bus_clks); + icc_provider_del(provider); + + return ret; +} + +static int qnoc_remove(struct platform_device *pdev) +{ + struct qcom_icc_provider *qp = platform_get_drvdata(pdev); + struct icc_provider *provider = &qp->provider; + struct icc_node *n; + + list_for_each_entry(n, &provider->nodes, node_list) { + icc_node_del(n); + icc_node_destroy(n->id); + } + clk_bulk_disable_unprepare(qp->num_clks, qp->bus_clks); + + return icc_provider_del(provider); +} + +static const struct of_device_id qcs404_noc_of_match[] = { + { .compatible = "qcom,qcs404-bimc", .data = &qcs404_bimc }, + { .compatible = "qcom,qcs404-pcnoc", .data = &qcs404_pcnoc }, + { .compatible = "qcom,qcs404-snoc", .data = &qcs404_snoc }, + { }, +}; +MODULE_DEVICE_TABLE(of, qcs404_noc_of_match); + +static struct platform_driver qcs404_noc_driver = { + .probe = qnoc_probe, + .remove = qnoc_remove, + .driver = { + .name = "qnoc-qcs404", + .of_match_table = qcs404_noc_of_match, + }, +}; +module_platform_driver(qcs404_noc_driver); +MODULE_DESCRIPTION("Qualcomm QCS404 NoC driver"); +MODULE_LICENSE("GPL v2"); diff --git a/include/dt-bindings/interconnect/qcom,qcs404.h b/include/dt-bindings/interconnect/qcom,qcs404.h new file mode 100644 index 000000000000..960f6e39c5f2 --- /dev/null +++ b/include/dt-bindings/interconnect/qcom,qcs404.h @@ -0,0 +1,88 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Qualcomm interconnect IDs + * + * Copyright (c) 2019, Linaro Ltd. + * Author: Georgi Djakov <georgi.djakov@linaro.org> + */ + +#ifndef __DT_BINDINGS_INTERCONNECT_QCOM_QCS404_H +#define __DT_BINDINGS_INTERCONNECT_QCOM_QCS404_H + +#define MASTER_AMPSS_M0 0 +#define MASTER_OXILI 1 +#define MASTER_MDP_PORT0 2 +#define MASTER_SNOC_BIMC_1 3 +#define MASTER_TCU_0 4 +#define SLAVE_EBI_CH0 5 +#define SLAVE_BIMC_SNOC 6 + +#define MASTER_SPDM 0 +#define MASTER_BLSP_1 1 +#define MASTER_BLSP_2 2 +#define MASTER_XI_USB_HS1 3 +#define MASTER_CRYPT0 4 +#define MASTER_SDCC_1 5 +#define MASTER_SDCC_2 6 +#define MASTER_SNOC_PCNOC 7 +#define MASTER_QPIC 8 +#define PCNOC_INT_0 9 +#define PCNOC_INT_2 10 +#define PCNOC_INT_3 11 +#define PCNOC_S_0 12 +#define PCNOC_S_1 13 +#define PCNOC_S_2 14 +#define PCNOC_S_3 15 +#define PCNOC_S_4 16 +#define PCNOC_S_6 17 +#define PCNOC_S_7 18 +#define PCNOC_S_8 19 +#define PCNOC_S_9 20 +#define PCNOC_S_10 21 +#define PCNOC_S_11 22 +#define SLAVE_SPDM 23 +#define SLAVE_PDM 24 +#define SLAVE_PRNG 25 +#define SLAVE_TCSR 26 +#define SLAVE_SNOC_CFG 27 +#define SLAVE_MESSAGE_RAM 28 +#define SLAVE_DISP_SS_CFG 29 +#define SLAVE_GPU_CFG 30 +#define SLAVE_BLSP_1 31 +#define SLAVE_BLSP_2 32 +#define SLAVE_TLMM_NORTH 33 +#define SLAVE_PCIE 34 +#define SLAVE_ETHERNET 35 +#define SLAVE_TLMM_EAST 36 +#define SLAVE_TCU 37 +#define SLAVE_PMIC_ARB 38 +#define SLAVE_SDCC_1 39 +#define SLAVE_SDCC_2 40 +#define SLAVE_TLMM_SOUTH 41 +#define SLAVE_USB_HS 42 +#define SLAVE_USB3 43 +#define SLAVE_CRYPTO_0_CFG 44 +#define SLAVE_PCNOC_SNOC 45 + +#define MASTER_QDSS_BAM 0 +#define MASTER_BIMC_SNOC 1 +#define MASTER_PCNOC_SNOC 2 +#define MASTER_QDSS_ETR 3 +#define MASTER_EMAC 4 +#define MASTER_PCIE 5 +#define MASTER_USB3 6 +#define QDSS_INT 7 +#define SNOC_INT_0 8 +#define SNOC_INT_1 9 +#define SNOC_INT_2 10 +#define SLAVE_KPSS_AHB 11 +#define SLAVE_WCSS 12 +#define SLAVE_SNOC_BIMC_1 13 +#define SLAVE_IMEM 14 +#define SLAVE_SNOC_PCNOC 15 +#define SLAVE_QDSS_STM 16 +#define SLAVE_CATS_0 17 +#define SLAVE_CATS_1 18 +#define SLAVE_LPASS 19 + +#endif ^ permalink raw reply related [flat|nested] 11+ messages in thread
* Re: [PATCH v3 2/5] interconnect: qcom: Add QCS404 interconnect provider driver 2019-06-11 16:41 ` [PATCH v3 2/5] interconnect: qcom: Add QCS404 interconnect provider driver Georgi Djakov @ 2019-06-11 23:34 ` Bjorn Andersson 0 siblings, 0 replies; 11+ messages in thread From: Bjorn Andersson @ 2019-06-11 23:34 UTC (permalink / raw) To: Georgi Djakov Cc: robh+dt, agross, vkoul, evgreen, daidavid1, linux-pm, devicetree, linux-kernel, linux-arm-msm On Tue 11 Jun 09:41 PDT 2019, Georgi Djakov wrote: This looks good, just two minor things. > diff --git a/drivers/interconnect/qcom/qcs404.c b/drivers/interconnect/qcom/qcs404.c > new file mode 100644 > index 000000000000..99be0928e2ad > --- /dev/null > +++ b/drivers/interconnect/qcom/qcs404.c > @@ -0,0 +1,539 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * Copyright (C) 2019 Linaro Ltd > + */ > + > +#include <dt-bindings/interconnect/qcom,qcs404.h> > +#include <linux/clk.h> > +#include <linux/device.h> > +#include <linux/interconnect-provider.h> > +#include <linux/io.h> > +#include <linux/module.h> > +#include <linux/of_device.h> > +#include <linux/of_platform.h> > +#include <linux/platform_device.h> > +#include <linux/slab.h> > + > +#include "smd-rpm.h" This file and the two functions defined therein doesn't exist until patch 4, so please move this patch later in the series. [..] > diff --git a/include/dt-bindings/interconnect/qcom,qcs404.h b/include/dt-bindings/interconnect/qcom,qcs404.h I think the preferred way is to have the DT binding headers as part of the DT binding patch. Regards, Bjorn ^ permalink raw reply [flat|nested] 11+ messages in thread
* [PATCH v3 3/5] soc: qcom: smd-rpm: Create RPM interconnect proxy child device 2019-06-11 16:41 [PATCH v3 0/5] Add QCS404 interconnect provider driver Georgi Djakov 2019-06-11 16:41 ` [PATCH v3 1/5] dt-bindings: interconnect: Add Qualcomm QCS404 DT bindings Georgi Djakov 2019-06-11 16:41 ` [PATCH v3 2/5] interconnect: qcom: Add QCS404 interconnect provider driver Georgi Djakov @ 2019-06-11 16:41 ` Georgi Djakov 2019-06-11 23:23 ` Bjorn Andersson 2019-06-11 16:41 ` [PATCH v3 4/5] interconnect: qcom: Add interconnect SMD over SMD driver Georgi Djakov 2019-06-11 16:41 ` [PATCH v3 5/5] arm64: dts: qcs404: Add interconnect provider DT nodes Georgi Djakov 4 siblings, 1 reply; 11+ messages in thread From: Georgi Djakov @ 2019-06-11 16:41 UTC (permalink / raw) To: robh+dt, bjorn.andersson, agross, georgi.djakov Cc: vkoul, evgreen, daidavid1, linux-pm, devicetree, linux-kernel, linux-arm-msm Register a platform device to handle the communication of bus bandwidth requests with the remote processor. The interconnect proxy device is part of this remote processor (RPM) hardware. Let's create a icc-smd-rpm proxy child device to represent the bus throughput functionality that is provided by the RPM. Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> --- v3: - New patch. drivers/soc/qcom/smd-rpm.c | 17 ++++++++++++++++- 1 file changed, 16 insertions(+), 1 deletion(-) diff --git a/drivers/soc/qcom/smd-rpm.c b/drivers/soc/qcom/smd-rpm.c index 9956bb2c63f2..a028250737ec 100644 --- a/drivers/soc/qcom/smd-rpm.c +++ b/drivers/soc/qcom/smd-rpm.c @@ -27,12 +27,14 @@ /** * struct qcom_smd_rpm - state of the rpm device driver * @rpm_channel: reference to the smd channel + * @icc: interconnect proxy device * @ack: completion for acks * @lock: mutual exclusion around the send/complete pair * @ack_status: result of the rpm request */ struct qcom_smd_rpm { struct rpmsg_endpoint *rpm_channel; + struct platform_device *icc; struct device *dev; struct completion ack; @@ -201,6 +203,7 @@ static int qcom_smd_rpm_callback(struct rpmsg_device *rpdev, static int qcom_smd_rpm_probe(struct rpmsg_device *rpdev) { struct qcom_smd_rpm *rpm; + int ret; rpm = devm_kzalloc(&rpdev->dev, sizeof(*rpm), GFP_KERNEL); if (!rpm) @@ -213,11 +216,23 @@ static int qcom_smd_rpm_probe(struct rpmsg_device *rpdev) rpm->rpm_channel = rpdev->ept; dev_set_drvdata(&rpdev->dev, rpm); - return of_platform_populate(rpdev->dev.of_node, NULL, NULL, &rpdev->dev); + rpm->icc = platform_device_register_data(&rpdev->dev, "icc_smd_rpm", -1, + NULL, 0); + if (!IS_ERR(rpm->icc)) + platform_set_drvdata(rpm->icc, rpm); + + ret = of_platform_populate(rpdev->dev.of_node, NULL, NULL, &rpdev->dev); + if (ret) + platform_device_unregister(rpm->icc); + + return ret; } static void qcom_smd_rpm_remove(struct rpmsg_device *rpdev) { + struct qcom_smd_rpm *rpm = dev_get_drvdata(&rpdev->dev); + + platform_device_unregister(rpm->icc); of_platform_depopulate(&rpdev->dev); } ^ permalink raw reply related [flat|nested] 11+ messages in thread
* Re: [PATCH v3 3/5] soc: qcom: smd-rpm: Create RPM interconnect proxy child device 2019-06-11 16:41 ` [PATCH v3 3/5] soc: qcom: smd-rpm: Create RPM interconnect proxy child device Georgi Djakov @ 2019-06-11 23:23 ` Bjorn Andersson 0 siblings, 0 replies; 11+ messages in thread From: Bjorn Andersson @ 2019-06-11 23:23 UTC (permalink / raw) To: Georgi Djakov Cc: robh+dt, agross, vkoul, evgreen, daidavid1, linux-pm, devicetree, linux-kernel, linux-arm-msm On Tue 11 Jun 09:41 PDT 2019, Georgi Djakov wrote: > Register a platform device to handle the communication of bus bandwidth > requests with the remote processor. The interconnect proxy device is part > of this remote processor (RPM) hardware. Let's create a icc-smd-rpm proxy > child device to represent the bus throughput functionality that is provided > by the RPM. > > Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> > --- > > v3: > - New patch. > > drivers/soc/qcom/smd-rpm.c | 17 ++++++++++++++++- > 1 file changed, 16 insertions(+), 1 deletion(-) > > diff --git a/drivers/soc/qcom/smd-rpm.c b/drivers/soc/qcom/smd-rpm.c > index 9956bb2c63f2..a028250737ec 100644 > --- a/drivers/soc/qcom/smd-rpm.c > +++ b/drivers/soc/qcom/smd-rpm.c > @@ -27,12 +27,14 @@ > /** > * struct qcom_smd_rpm - state of the rpm device driver > * @rpm_channel: reference to the smd channel > + * @icc: interconnect proxy device > * @ack: completion for acks > * @lock: mutual exclusion around the send/complete pair > * @ack_status: result of the rpm request > */ > struct qcom_smd_rpm { > struct rpmsg_endpoint *rpm_channel; > + struct platform_device *icc; > struct device *dev; > > struct completion ack; > @@ -201,6 +203,7 @@ static int qcom_smd_rpm_callback(struct rpmsg_device *rpdev, > static int qcom_smd_rpm_probe(struct rpmsg_device *rpdev) > { > struct qcom_smd_rpm *rpm; > + int ret; > > rpm = devm_kzalloc(&rpdev->dev, sizeof(*rpm), GFP_KERNEL); > if (!rpm) > @@ -213,11 +216,23 @@ static int qcom_smd_rpm_probe(struct rpmsg_device *rpdev) > rpm->rpm_channel = rpdev->ept; > dev_set_drvdata(&rpdev->dev, rpm); > > - return of_platform_populate(rpdev->dev.of_node, NULL, NULL, &rpdev->dev); > + rpm->icc = platform_device_register_data(&rpdev->dev, "icc_smd_rpm", -1, > + NULL, 0); > + if (!IS_ERR(rpm->icc)) This will be IS_ERR() only if the struct platform_device couldn't be allocated or registered, it does not relate to that driver's probe. As such it makes sense to fail the probe if this failed. So flip this around and return PTR_ERR() here. > + platform_set_drvdata(rpm->icc, rpm); It's possible that the device_register above finds the driver and calls it (pending initcall ordering etc), in which case the child's drvdata wouldn't yet be set. In the other drivers where we do this we have the child to request the drvdata of its parent, so I think you should do the same here. Apart from this, this patch looks good! Regards, Bjorn > + > + ret = of_platform_populate(rpdev->dev.of_node, NULL, NULL, &rpdev->dev); > + if (ret) > + platform_device_unregister(rpm->icc); > + > + return ret; > } > > static void qcom_smd_rpm_remove(struct rpmsg_device *rpdev) > { > + struct qcom_smd_rpm *rpm = dev_get_drvdata(&rpdev->dev); > + > + platform_device_unregister(rpm->icc); > of_platform_depopulate(&rpdev->dev); > } > ^ permalink raw reply [flat|nested] 11+ messages in thread
* [PATCH v3 4/5] interconnect: qcom: Add interconnect SMD over SMD driver 2019-06-11 16:41 [PATCH v3 0/5] Add QCS404 interconnect provider driver Georgi Djakov ` (2 preceding siblings ...) 2019-06-11 16:41 ` [PATCH v3 3/5] soc: qcom: smd-rpm: Create RPM interconnect proxy child device Georgi Djakov @ 2019-06-11 16:41 ` Georgi Djakov 2019-06-11 23:31 ` Bjorn Andersson 2019-06-11 16:41 ` [PATCH v3 5/5] arm64: dts: qcs404: Add interconnect provider DT nodes Georgi Djakov 4 siblings, 1 reply; 11+ messages in thread From: Georgi Djakov @ 2019-06-11 16:41 UTC (permalink / raw) To: robh+dt, bjorn.andersson, agross, georgi.djakov Cc: vkoul, evgreen, daidavid1, linux-pm, devicetree, linux-kernel, linux-arm-msm On some Qualcomm SoCs, there is a remote processor, which controls some of the Network-On-Chip interconnect resources. Other CPUs express their needs by communicating with this processor. Add a driver to handle communication with this remote processor. Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> --- v3: - New patch. drivers/interconnect/qcom/Kconfig | 9 ++++ drivers/interconnect/qcom/Makefile | 2 + drivers/interconnect/qcom/smd-rpm.c | 72 +++++++++++++++++++++++++++++ drivers/interconnect/qcom/smd-rpm.h | 15 ++++++ 4 files changed, 98 insertions(+) create mode 100644 drivers/interconnect/qcom/smd-rpm.c create mode 100644 drivers/interconnect/qcom/smd-rpm.h diff --git a/drivers/interconnect/qcom/Kconfig b/drivers/interconnect/qcom/Kconfig index e76e3e248c41..b0eade1da5d5 100644 --- a/drivers/interconnect/qcom/Kconfig +++ b/drivers/interconnect/qcom/Kconfig @@ -9,6 +9,7 @@ config INTERCONNECT_QCOM_QCS404 tristate "Qualcomm QCS404 interconnect driver" depends on INTERCONNECT_QCOM depends on QCOM_SMD_RPM || COMPILE_TEST + select INTERCONNECT_QCOM_SMD_RPM help This is a driver for the Qualcomm Network-on-Chip on qcs404-based platforms. @@ -20,3 +21,11 @@ config INTERCONNECT_QCOM_SDM845 help This is a driver for the Qualcomm Network-on-Chip on sdm845-based platforms. + +config INTERCONNECT_QCOM_SMD_RPM + tristate "Qualcomm SMD RPM interconnect driver" + depends on INTERCONNECT_QCOM + depends on QCOM_SMD_RPM || COMPILE_TEST + help + This is a driver for communicating interconnect related configuration + details with a remote processor (RPM) on Qualcomm platforms. diff --git a/drivers/interconnect/qcom/Makefile b/drivers/interconnect/qcom/Makefile index 059ff325ee6c..67dafb783dec 100644 --- a/drivers/interconnect/qcom/Makefile +++ b/drivers/interconnect/qcom/Makefile @@ -2,6 +2,8 @@ qnoc-qcs404-objs := qcs404.o qnoc-sdm845-objs := sdm845.o +icc-smd-rpm-objs := smd-rpm.o obj-$(CONFIG_INTERCONNECT_QCOM_QCS404) += qnoc-qcs404.o obj-$(CONFIG_INTERCONNECT_QCOM_SDM845) += qnoc-sdm845.o +obj-$(CONFIG_INTERCONNECT_QCOM_SMD_RPM) += icc-smd-rpm.o diff --git a/drivers/interconnect/qcom/smd-rpm.c b/drivers/interconnect/qcom/smd-rpm.c new file mode 100644 index 000000000000..af22c0a293e6 --- /dev/null +++ b/drivers/interconnect/qcom/smd-rpm.c @@ -0,0 +1,72 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * RPM over SMD communication wrapper for interconnects + * + * Copyright (C) 2019 Linaro Ltd + * Author: Georgi Djakov <georgi.djakov@linaro.org> + */ + +#include <linux/interconnect-provider.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_platform.h> +#include <linux/platform_device.h> +#include <linux/soc/qcom/smd-rpm.h> + +#include "smd-rpm.h" + +#define RPM_KEY_BW 0x00007762 + +static struct qcom_smd_rpm *icc_smd_rpm; + +struct icc_rpm_smd_req { + __le32 key; + __le32 nbytes; + __le32 value; +}; + +bool qcom_icc_rpm_smd_available(void) +{ + if (!icc_smd_rpm) + return false; + + return true; +} +EXPORT_SYMBOL_GPL(qcom_icc_rpm_smd_available); + +int qcom_icc_rpm_smd_send(int ctx, int rsc_type, int id, u32 val) +{ + struct icc_rpm_smd_req req = { + .key = cpu_to_le32(RPM_KEY_BW), + .nbytes = cpu_to_le32(sizeof(u32)), + .value = cpu_to_le32(val), + }; + + return qcom_rpm_smd_write(icc_smd_rpm, ctx, rsc_type, id, &req, + sizeof(req)); +} +EXPORT_SYMBOL_GPL(qcom_icc_rpm_smd_send); + +static int qcom_icc_rpm_smd_probe(struct platform_device *pdev) +{ + icc_smd_rpm = dev_get_drvdata(pdev->dev.parent); + + if (!icc_smd_rpm) { + dev_err(&pdev->dev, "unable to retrieve handle to RPM\n"); + return -ENODEV; + } + + return 0; +} + +static struct platform_driver qcom_interconnect_rpm_smd_driver = { + .driver = { + .name = "icc_smd_rpm", + }, + .probe = qcom_icc_rpm_smd_probe, +}; +module_platform_driver(qcom_interconnect_rpm_smd_driver); +MODULE_AUTHOR("Georgi Djakov <georgi.djakov@linaro.org>"); +MODULE_DESCRIPTION("Qualcomm SMD RPM interconnect proxy driver"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:icc_smd_rpm"); diff --git a/drivers/interconnect/qcom/smd-rpm.h b/drivers/interconnect/qcom/smd-rpm.h new file mode 100644 index 000000000000..ca9d0327b8ac --- /dev/null +++ b/drivers/interconnect/qcom/smd-rpm.h @@ -0,0 +1,15 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (c) 2019, Linaro Ltd. + * Author: Georgi Djakov <georgi.djakov@linaro.org> + */ + +#ifndef __DRIVERS_INTERCONNECT_QCOM_SMD_RPM_H +#define __DRIVERS_INTERCONNECT_QCOM_SMD_RPM_H + +#include <linux/soc/qcom/smd-rpm.h> + +bool qcom_icc_rpm_smd_available(void); +int qcom_icc_rpm_smd_send(int ctx, int rsc_type, int id, u32 val); + +#endif ^ permalink raw reply related [flat|nested] 11+ messages in thread
* Re: [PATCH v3 4/5] interconnect: qcom: Add interconnect SMD over SMD driver 2019-06-11 16:41 ` [PATCH v3 4/5] interconnect: qcom: Add interconnect SMD over SMD driver Georgi Djakov @ 2019-06-11 23:31 ` Bjorn Andersson 0 siblings, 0 replies; 11+ messages in thread From: Bjorn Andersson @ 2019-06-11 23:31 UTC (permalink / raw) To: Georgi Djakov Cc: robh+dt, agross, vkoul, evgreen, daidavid1, linux-pm, devicetree, linux-kernel, linux-arm-msm On Tue 11 Jun 09:41 PDT 2019, Georgi Djakov wrote: > On some Qualcomm SoCs, there is a remote processor, which controls some of > the Network-On-Chip interconnect resources. Other CPUs express their needs > by communicating with this processor. Add a driver to handle communication > with this remote processor. > > Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> > --- > > v3: > - New patch. > > drivers/interconnect/qcom/Kconfig | 9 ++++ > drivers/interconnect/qcom/Makefile | 2 + > drivers/interconnect/qcom/smd-rpm.c | 72 +++++++++++++++++++++++++++++ > drivers/interconnect/qcom/smd-rpm.h | 15 ++++++ > 4 files changed, 98 insertions(+) > create mode 100644 drivers/interconnect/qcom/smd-rpm.c > create mode 100644 drivers/interconnect/qcom/smd-rpm.h > > diff --git a/drivers/interconnect/qcom/Kconfig b/drivers/interconnect/qcom/Kconfig > index e76e3e248c41..b0eade1da5d5 100644 > --- a/drivers/interconnect/qcom/Kconfig > +++ b/drivers/interconnect/qcom/Kconfig > @@ -9,6 +9,7 @@ config INTERCONNECT_QCOM_QCS404 > tristate "Qualcomm QCS404 interconnect driver" > depends on INTERCONNECT_QCOM > depends on QCOM_SMD_RPM || COMPILE_TEST > + select INTERCONNECT_QCOM_SMD_RPM > help > This is a driver for the Qualcomm Network-on-Chip on qcs404-based > platforms. > @@ -20,3 +21,11 @@ config INTERCONNECT_QCOM_SDM845 > help > This is a driver for the Qualcomm Network-on-Chip on sdm845-based > platforms. > + > +config INTERCONNECT_QCOM_SMD_RPM > + tristate "Qualcomm SMD RPM interconnect driver" I think it's correct to have INTERCONNECT_QCOM_QCS404 select INTERCONNECT_QCOM_SMD_RPM and then but INTERCONNECT_QCOM_SMD_RPM should not be user selectable. So leave the tristate but drop the description and the help text. > + depends on INTERCONNECT_QCOM > + depends on QCOM_SMD_RPM || COMPILE_TEST > + help > + This is a driver for communicating interconnect related configuration > + details with a remote processor (RPM) on Qualcomm platforms. > diff --git a/drivers/interconnect/qcom/Makefile b/drivers/interconnect/qcom/Makefile > index 059ff325ee6c..67dafb783dec 100644 > --- a/drivers/interconnect/qcom/Makefile > +++ b/drivers/interconnect/qcom/Makefile > @@ -2,6 +2,8 @@ > > qnoc-qcs404-objs := qcs404.o > qnoc-sdm845-objs := sdm845.o > +icc-smd-rpm-objs := smd-rpm.o > > obj-$(CONFIG_INTERCONNECT_QCOM_QCS404) += qnoc-qcs404.o > obj-$(CONFIG_INTERCONNECT_QCOM_SDM845) += qnoc-sdm845.o > +obj-$(CONFIG_INTERCONNECT_QCOM_SMD_RPM) += icc-smd-rpm.o > diff --git a/drivers/interconnect/qcom/smd-rpm.c b/drivers/interconnect/qcom/smd-rpm.c > new file mode 100644 > index 000000000000..af22c0a293e6 > --- /dev/null > +++ b/drivers/interconnect/qcom/smd-rpm.c > @@ -0,0 +1,72 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * RPM over SMD communication wrapper for interconnects > + * > + * Copyright (C) 2019 Linaro Ltd > + * Author: Georgi Djakov <georgi.djakov@linaro.org> > + */ > + > +#include <linux/interconnect-provider.h> > +#include <linux/module.h> > +#include <linux/of.h> > +#include <linux/of_platform.h> > +#include <linux/platform_device.h> > +#include <linux/soc/qcom/smd-rpm.h> > + > +#include "smd-rpm.h" > + > +#define RPM_KEY_BW 0x00007762 > + > +static struct qcom_smd_rpm *icc_smd_rpm; > + > +struct icc_rpm_smd_req { > + __le32 key; > + __le32 nbytes; > + __le32 value; > +}; > + > +bool qcom_icc_rpm_smd_available(void) > +{ > + if (!icc_smd_rpm) > + return false; > + > + return true; > +} > +EXPORT_SYMBOL_GPL(qcom_icc_rpm_smd_available); > + > +int qcom_icc_rpm_smd_send(int ctx, int rsc_type, int id, u32 val) > +{ > + struct icc_rpm_smd_req req = { > + .key = cpu_to_le32(RPM_KEY_BW), > + .nbytes = cpu_to_le32(sizeof(u32)), > + .value = cpu_to_le32(val), > + }; > + > + return qcom_rpm_smd_write(icc_smd_rpm, ctx, rsc_type, id, &req, > + sizeof(req)); > +} > +EXPORT_SYMBOL_GPL(qcom_icc_rpm_smd_send); > + > +static int qcom_icc_rpm_smd_probe(struct platform_device *pdev) > +{ > + icc_smd_rpm = dev_get_drvdata(pdev->dev.parent); > + > + if (!icc_smd_rpm) { > + dev_err(&pdev->dev, "unable to retrieve handle to RPM\n"); > + return -ENODEV; > + } > + > + return 0; > +} It would probably be nice to have a remove function that zeros out icc_smd_rpm as well. Regards, Bjorn > + > +static struct platform_driver qcom_interconnect_rpm_smd_driver = { > + .driver = { > + .name = "icc_smd_rpm", > + }, > + .probe = qcom_icc_rpm_smd_probe, > +}; > +module_platform_driver(qcom_interconnect_rpm_smd_driver); > +MODULE_AUTHOR("Georgi Djakov <georgi.djakov@linaro.org>"); > +MODULE_DESCRIPTION("Qualcomm SMD RPM interconnect proxy driver"); > +MODULE_LICENSE("GPL v2"); > +MODULE_ALIAS("platform:icc_smd_rpm"); > diff --git a/drivers/interconnect/qcom/smd-rpm.h b/drivers/interconnect/qcom/smd-rpm.h > new file mode 100644 > index 000000000000..ca9d0327b8ac > --- /dev/null > +++ b/drivers/interconnect/qcom/smd-rpm.h > @@ -0,0 +1,15 @@ > +/* SPDX-License-Identifier: GPL-2.0 */ > +/* > + * Copyright (c) 2019, Linaro Ltd. > + * Author: Georgi Djakov <georgi.djakov@linaro.org> > + */ > + > +#ifndef __DRIVERS_INTERCONNECT_QCOM_SMD_RPM_H > +#define __DRIVERS_INTERCONNECT_QCOM_SMD_RPM_H > + > +#include <linux/soc/qcom/smd-rpm.h> > + > +bool qcom_icc_rpm_smd_available(void); > +int qcom_icc_rpm_smd_send(int ctx, int rsc_type, int id, u32 val); > + > +#endif ^ permalink raw reply [flat|nested] 11+ messages in thread
* [PATCH v3 5/5] arm64: dts: qcs404: Add interconnect provider DT nodes 2019-06-11 16:41 [PATCH v3 0/5] Add QCS404 interconnect provider driver Georgi Djakov ` (3 preceding siblings ...) 2019-06-11 16:41 ` [PATCH v3 4/5] interconnect: qcom: Add interconnect SMD over SMD driver Georgi Djakov @ 2019-06-11 16:41 ` Georgi Djakov 2019-06-11 23:40 ` Bjorn Andersson 4 siblings, 1 reply; 11+ messages in thread From: Georgi Djakov @ 2019-06-11 16:41 UTC (permalink / raw) To: robh+dt, bjorn.andersson, agross, georgi.djakov Cc: vkoul, evgreen, daidavid1, linux-pm, devicetree, linux-kernel, linux-arm-msm Add the DT nodes for the network-on-chip interconnect buses found on qcs404-based platforms. Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> --- v3: - Updated according to the new binding: added reg property and moved under the "soc" node. arch/arm64/boot/dts/qcom/qcs404.dtsi | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi index ffedf9640af7..07ff592233b6 100644 --- a/arch/arm64/boot/dts/qcom/qcs404.dtsi +++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi @@ -1,6 +1,7 @@ // SPDX-License-Identifier: GPL-2.0 // Copyright (c) 2018, Linaro Limited +#include <dt-bindings/interconnect/qcom,qcs404.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/qcom,gcc-qcs404.h> #include <dt-bindings/clock/qcom,rpmcc.h> @@ -411,6 +412,33 @@ #interrupt-cells = <4>; }; + bimc: interconnect@400000 { + reg = <0x00400000 0x80000>; + compatible = "qcom,qcs404-bimc"; + #interconnect-cells = <1>; + clock-names = "bus_clk", "bus_a_clk"; + clocks = <&rpmcc RPM_SMD_BIMC_CLK>, + <&rpmcc RPM_SMD_BIMC_A_CLK>; + }; + + pcnoc: interconnect@500000 { + reg = <0x00500000 0x15080>; + compatible = "qcom,qcs404-pcnoc"; + #interconnect-cells = <1>; + clock-names = "bus_clk", "bus_a_clk"; + clocks = <&rpmcc RPM_SMD_PNOC_CLK>, + <&rpmcc RPM_SMD_PNOC_A_CLK>; + }; + + snoc: interconnect@580000 { + reg = <0x00580000 0x23080>; + compatible = "qcom,qcs404-snoc"; + #interconnect-cells = <1>; + clock-names = "bus_clk", "bus_a_clk"; + clocks = <&rpmcc RPM_SMD_SNOC_CLK>, + <&rpmcc RPM_SMD_SNOC_A_CLK>; + }; + sdcc1: sdcc@7804000 { compatible = "qcom,sdhci-msm-v5"; reg = <0x07804000 0x1000>, <0x7805000 0x1000>; ^ permalink raw reply related [flat|nested] 11+ messages in thread
* Re: [PATCH v3 5/5] arm64: dts: qcs404: Add interconnect provider DT nodes 2019-06-11 16:41 ` [PATCH v3 5/5] arm64: dts: qcs404: Add interconnect provider DT nodes Georgi Djakov @ 2019-06-11 23:40 ` Bjorn Andersson 0 siblings, 0 replies; 11+ messages in thread From: Bjorn Andersson @ 2019-06-11 23:40 UTC (permalink / raw) To: Georgi Djakov Cc: robh+dt, agross, vkoul, evgreen, daidavid1, linux-pm, devicetree, linux-kernel, linux-arm-msm On Tue 11 Jun 09:41 PDT 2019, Georgi Djakov wrote: > Add the DT nodes for the network-on-chip interconnect buses found > on qcs404-based platforms. > > Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> > --- > > v3: > - Updated according to the new binding: added reg property and moved under the > "soc" node. > > arch/arm64/boot/dts/qcom/qcs404.dtsi | 28 ++++++++++++++++++++++++++++ > 1 file changed, 28 insertions(+) > > diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi > index ffedf9640af7..07ff592233b6 100644 > --- a/arch/arm64/boot/dts/qcom/qcs404.dtsi > +++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi > @@ -1,6 +1,7 @@ > // SPDX-License-Identifier: GPL-2.0 > // Copyright (c) 2018, Linaro Limited > > +#include <dt-bindings/interconnect/qcom,qcs404.h> > #include <dt-bindings/interrupt-controller/arm-gic.h> > #include <dt-bindings/clock/qcom,gcc-qcs404.h> > #include <dt-bindings/clock/qcom,rpmcc.h> > @@ -411,6 +412,33 @@ > #interrupt-cells = <4>; > }; > > + bimc: interconnect@400000 { Please maintain sort order of address, node name, label name. So this should go between rng@e3000 and remoteproc@b00000. Other than that: Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Regards, Bjorn > + reg = <0x00400000 0x80000>; > + compatible = "qcom,qcs404-bimc"; > + #interconnect-cells = <1>; > + clock-names = "bus_clk", "bus_a_clk"; > + clocks = <&rpmcc RPM_SMD_BIMC_CLK>, > + <&rpmcc RPM_SMD_BIMC_A_CLK>; > + }; > + > + pcnoc: interconnect@500000 { > + reg = <0x00500000 0x15080>; > + compatible = "qcom,qcs404-pcnoc"; > + #interconnect-cells = <1>; > + clock-names = "bus_clk", "bus_a_clk"; > + clocks = <&rpmcc RPM_SMD_PNOC_CLK>, > + <&rpmcc RPM_SMD_PNOC_A_CLK>; > + }; > + > + snoc: interconnect@580000 { > + reg = <0x00580000 0x23080>; > + compatible = "qcom,qcs404-snoc"; > + #interconnect-cells = <1>; > + clock-names = "bus_clk", "bus_a_clk"; > + clocks = <&rpmcc RPM_SMD_SNOC_CLK>, > + <&rpmcc RPM_SMD_SNOC_A_CLK>; > + }; > + > sdcc1: sdcc@7804000 { > compatible = "qcom,sdhci-msm-v5"; > reg = <0x07804000 0x1000>, <0x7805000 0x1000>; ^ permalink raw reply [flat|nested] 11+ messages in thread
end of thread, other threads:[~2019-06-11 23:40 UTC | newest] Thread overview: 11+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2019-06-11 16:41 [PATCH v3 0/5] Add QCS404 interconnect provider driver Georgi Djakov 2019-06-11 16:41 ` [PATCH v3 1/5] dt-bindings: interconnect: Add Qualcomm QCS404 DT bindings Georgi Djakov 2019-06-11 23:08 ` Bjorn Andersson 2019-06-11 16:41 ` [PATCH v3 2/5] interconnect: qcom: Add QCS404 interconnect provider driver Georgi Djakov 2019-06-11 23:34 ` Bjorn Andersson 2019-06-11 16:41 ` [PATCH v3 3/5] soc: qcom: smd-rpm: Create RPM interconnect proxy child device Georgi Djakov 2019-06-11 23:23 ` Bjorn Andersson 2019-06-11 16:41 ` [PATCH v3 4/5] interconnect: qcom: Add interconnect SMD over SMD driver Georgi Djakov 2019-06-11 23:31 ` Bjorn Andersson 2019-06-11 16:41 ` [PATCH v3 5/5] arm64: dts: qcs404: Add interconnect provider DT nodes Georgi Djakov 2019-06-11 23:40 ` Bjorn Andersson
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).