[PATCH AUTOSEL 5.1 057/219] cpupower : frequency-set -r option misses the last cpu in related cpu list

[PATCH AUTOSEL 5.1 057/219] cpupower : frequency-set -r option misses the last cpu in related cpu list

[Sasha Levin]

From: Abhishek Goel <huntbag@linux.vnet.ibm.com>

[ Upstream commit 04507c0a9385cc8280f794a36bfff567c8cc1042 ]

To set frequency on specific cpus using cpupower, following syntax can
be used :
cpupower -c #i frequency-set -f #f -r

While setting frequency using cpupower frequency-set command, if we use
'-r' option, it is expected to set frequency for all cpus related to
cpu #i. But it is observed to be missing the last cpu in related cpu
list. This patch fixes the problem.

Signed-off-by: Abhishek Goel <huntbag@linux.vnet.ibm.com>
Reviewed-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/power/cpupower/utils/cpufreq-set.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/tools/power/cpupower/utils/cpufreq-set.c b/tools/power/cpupower/utils/cpufreq-set.c
index 1eef0aed6423..08a405593a79 100644
--- a/tools/power/cpupower/utils/cpufreq-set.c
+++ b/tools/power/cpupower/utils/cpufreq-set.c
@@ -306,6 +306,8 @@ int cmd_freq_set(int argc, char **argv)
 				bitmask_setbit(cpus_chosen, cpus->cpu);
 				cpus = cpus->next;
 			}
+			/* Set the last cpu in related cpus list */
+			bitmask_setbit(cpus_chosen, cpus->cpu);
 			cpufreq_put_related_cpus(cpus);
 		}
 	}
-- 
2.20.1

[PATCH AUTOSEL 5.1 087/219] x86/cpu: Add Ice Lake NNPI to Intel family

[Sasha Levin]

From: Rajneesh Bhardwaj <rajneesh.bhardwaj@linux.intel.com>

[ Upstream commit e32d045cd4ba06b59878323e434bad010e78e658 ]

Add the CPUID model number of Ice Lake Neural Network Processor for Deep
Learning Inference (ICL-NNPI) to the Intel family list. Ice Lake NNPI uses
model number 0x9D and this will be documented in a future version of Intel
Software Development Manual.

Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: bp@suse.de
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: platform-driver-x86@vger.kernel.org
Cc: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: Len Brown <lenb@kernel.org>
Cc: Linux PM <linux-pm@vger.kernel.org>
Link: https://lkml.kernel.org/r/20190606012419.13250-1-rajneesh.bhardwaj@linux.intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/include/asm/intel-family.h | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/x86/include/asm/intel-family.h b/arch/x86/include/asm/intel-family.h
index 310118805f57..f60ddd655c78 100644
--- a/arch/x86/include/asm/intel-family.h
+++ b/arch/x86/include/asm/intel-family.h
@@ -56,6 +56,7 @@
 #define INTEL_FAM6_ICELAKE_XEON_D	0x6C
 #define INTEL_FAM6_ICELAKE_DESKTOP	0x7D
 #define INTEL_FAM6_ICELAKE_MOBILE	0x7E
+#define INTEL_FAM6_ICELAKE_NNPI		0x9D
 
 /* "Small Core" Processors (Atom) */
 
-- 
2.20.1

[PATCH AUTOSEL 5.1 167/219] cpufreq: Don't skip frequency validation for has_target() drivers

[Sasha Levin]

From: Viresh Kumar <viresh.kumar@linaro.org>

[ Upstream commit 9801522840cc1073f8064b4c979b7b6995c74bca ]

CPUFREQ_CONST_LOOPS was introduced in a very old commit from pre-2.6
kernel release by commit 6a4a93f9c0d5 ("[CPUFREQ] Fix 'out of sync'
issue").

Basically, that commit does two things:

 - It adds the frequency verification code (which is quite similar to
   what we have today as well).

 - And it sets the CPUFREQ_CONST_LOOPS flag only for setpolicy drivers,
   rightly so based on the code we had then. The idea was to avoid
   frequency validation for setpolicy drivers as the cpufreq core doesn't
   know what frequency the hardware is running at and so no point in
   doing frequency verification.

The problem happened when we started to use the same CPUFREQ_CONST_LOOPS
flag for constant loops-per-jiffy thing as well and many has_target()
drivers started using the same flag and unknowingly skipped the
verification of frequency. There is no logical reason behind skipping
frequency validation because of the presence of CPUFREQ_CONST_LOOPS
flag otherwise.

Fix this issue by skipping frequency validation only for setpolicy
drivers and always doing it for has_target() drivers irrespective of
the presence or absence of CPUFREQ_CONST_LOOPS flag.

cpufreq_notify_transition() is only called for has_target() type driver
and not for set_policy type, and the check is simply redundant. Remove
it as well.

Also remove () around freq comparison statement as they aren't required
and checkpatch also warns for them.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/cpufreq/cpufreq.c | 13 +++++--------
 1 file changed, 5 insertions(+), 8 deletions(-)

diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c
index bbf79544d0ad..86dbb784a0b8 100644
--- a/drivers/cpufreq/cpufreq.c
+++ b/drivers/cpufreq/cpufreq.c
@@ -316,12 +316,10 @@ static void cpufreq_notify_transition(struct cpufreq_policy *policy,
 		 * which is not equal to what the cpufreq core thinks is
 		 * "old frequency".
 		 */
-		if (!(cpufreq_driver->flags & CPUFREQ_CONST_LOOPS)) {
-			if (policy->cur && (policy->cur != freqs->old)) {
-				pr_debug("Warning: CPU frequency is %u, cpufreq assumed %u kHz\n",
-					 freqs->old, policy->cur);
-				freqs->old = policy->cur;
-			}
+		if (policy->cur && policy->cur != freqs->old) {
+			pr_debug("Warning: CPU frequency is %u, cpufreq assumed %u kHz\n",
+				 freqs->old, policy->cur);
+			freqs->old = policy->cur;
 		}
 
 		for_each_cpu(freqs->cpu, policy->cpus) {
@@ -1563,8 +1561,7 @@ static unsigned int __cpufreq_get(struct cpufreq_policy *policy)
 	if (policy->fast_switch_enabled)
 		return ret_freq;
 
-	if (ret_freq && policy->cur &&
-		!(cpufreq_driver->flags & CPUFREQ_CONST_LOOPS)) {
+	if (has_target() && ret_freq && policy->cur) {
 		/* verify no discrepancy between actual and
 					saved value exists */
 		if (unlikely(ret_freq != policy->cur)) {
-- 
2.20.1