linux-pm.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Dmitry Osipenko <digetx@gmail.com>
To: Chanwoo Choi <cw00.choi@samsung.com>
Cc: Thierry Reding <thierry.reding@gmail.com>,
	MyungJoo Ham <myungjoo.ham@samsung.com>,
	Kyungmin Park <kyungmin.park@samsung.com>,
	Jonathan Hunter <jonathanh@nvidia.com>,
	Tomeu Vizoso <tomeu.vizoso@collabora.com>,
	linux-pm@vger.kernel.org, linux-tegra@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH v4 17/24] PM / devfreq: tegra30: Use tracepoints for debugging
Date: Fri, 19 Jul 2019 03:49:38 +0300	[thread overview]
Message-ID: <20190719034938.6382f989@dimatab> (raw)
In-Reply-To: <209220ec-b677-3500-0e55-6cad57e97f88@samsung.com>

В Thu, 18 Jul 2019 18:47:09 +0900
Chanwoo Choi <cw00.choi@samsung.com> пишет:

> On 19. 7. 8. 오전 7:32, Dmitry Osipenko wrote:
> > Debug messages create too much CPU and memory activity by
> > themselves, so it's difficult to debug lower rates and catch
> > unwanted interrupts that happen rarely. Tracepoints are ideal in
> > that regards because they do not contribute to the sampled date at
> > all. This allowed me to catch few problems which are fixed by the
> > followup patches, without tracepoints it would be much harder to do.
> > 
> > Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
> > ---
> >  drivers/devfreq/tegra30-devfreq.c      |  43 +++-------
> >  include/trace/events/tegra30_devfreq.h | 105
> > +++++++++++++++++++++++++ 2 files changed, 117 insertions(+), 31
> > deletions(-) create mode 100644
> > include/trace/events/tegra30_devfreq.h  
> 
> As I knew, 'include/trace/events' don't include the header file
> for only one device driver. Usually, the trace event is provided
> by framework instead of each devic driver.

There are at least trace headers there for the tegra-apbdma,
tegra-host1x, intel-sst and intel-ish devices. I don't think that there
is a strict rule for the trace headers placement.

> > 
> > diff --git a/drivers/devfreq/tegra30-devfreq.c
> > b/drivers/devfreq/tegra30-devfreq.c index
> > 6ebf0f505767..43c9c5fbfe91 100644 ---
> > a/drivers/devfreq/tegra30-devfreq.c +++
> > b/drivers/devfreq/tegra30-devfreq.c @@ -19,6 +19,9 @@
> >  #include <linux/reset.h>
> >  #include <linux/workqueue.h>
> >  
> > +#define CREATE_TRACE_POINTS
> > +#include <trace/events/tegra30_devfreq.h>
> > +
> >  #include "governor.h"
> >  
> >  #define ACTMON_GLB_STATUS
> > 0x0 @@ -283,9 +286,6 @@ static void
> > tegra_actmon_get_lower_upper(struct tegra_devfreq *tegra, unsigned
> > long *lower, unsigned long *upper)
> >  {
> > -	struct device *ddev = tegra->devfreq->dev.parent;
> > -	u32 offset = dev->config->offset;
> > -
> >  	/*
> >  	 * Memory frequencies are guaranteed to have 1MHz
> > granularity
> >  	 * and thus we need this rounding down to get a proper
> > watermarks @@ -298,8 +298,8 @@ static void
> > tegra_actmon_get_lower_upper(struct tegra_devfreq *tegra, *lower =
> > tegra_actmon_lower_freq(tegra, target_freq); *upper =
> > tegra_actmon_upper_freq(tegra, target_freq); 
> > -	dev_dbg(ddev, "%03x: target_freq %lu lower freq %lu upper
> > freq %lu\n",
> > -		offset, target_freq, *lower, *upper);
> > +	trace_device_lower_upper(dev->config->offset, target_freq,
> > +				 *lower, *upper);
> >  
> >  	/*
> >  	 * The upper watermark should take into account CPU's
> > frequency @@ -377,30 +377,13 @@ static void
> > tegra_devfreq_update_wmark(struct tegra_devfreq *tegra,
> > device_writel(dev, lower + delta, ACTMON_DEV_LOWER_WMARK); }
> >  
> > -static void actmon_device_debug(struct tegra_devfreq *tegra,
> > -				struct tegra_devfreq_device *dev,
> > -				const char *prefix)
> > -{
> > -	dev_dbg(tegra->devfreq->dev.parent,
> > -		"%03x: %s: 0x%08x 0x%08x a %u %u %u c %u %u %u b
> > %lu cpu %u\n",
> > -		dev->config->offset, prefix,
> > -		device_readl(dev, ACTMON_DEV_INTR_STATUS),
> > -		device_readl(dev, ACTMON_DEV_CTRL),
> > -		device_readl(dev, ACTMON_DEV_AVG_COUNT),
> > -		device_readl(dev, ACTMON_DEV_AVG_LOWER_WMARK),
> > -		device_readl(dev, ACTMON_DEV_AVG_UPPER_WMARK),
> > -		device_readl(dev, ACTMON_DEV_COUNT),
> > -		device_readl(dev, ACTMON_DEV_LOWER_WMARK),
> > -		device_readl(dev, ACTMON_DEV_UPPER_WMARK),
> > -		dev->boost_freq, cpufreq_get(0));
> > -}
> > -
> >  static void actmon_isr_device(struct tegra_devfreq *tegra,
> >  			      struct tegra_devfreq_device *dev)
> >  {
> >  	u32 intr_status, dev_ctrl, avg_intr_mask, avg_count;
> >  
> > -	actmon_device_debug(tegra, dev, "isr+");
> > +	trace_device_isr_enter(tegra->regs, dev->config->offset,
> > +			       dev->boost_freq, cpufreq_get(0));
> >  
> >  	intr_status = device_readl(dev, ACTMON_DEV_INTR_STATUS);
> >  	avg_count = device_readl(dev, ACTMON_DEV_AVG_COUNT);
> > @@ -455,7 +438,8 @@ static void actmon_isr_device(struct
> > tegra_devfreq *tegra, device_writel(dev, dev_ctrl, ACTMON_DEV_CTRL);
> >  	device_writel(dev, ACTMON_INTR_STATUS_CLEAR,
> > ACTMON_DEV_INTR_STATUS); 
> > -	actmon_device_debug(tegra, dev, "isr-");
> > +	trace_device_isr_exit(tegra->regs, dev->config->offset,
> > +			      dev->boost_freq, cpufreq_get(0));
> >  }
> >  
> >  static unsigned long actmon_update_target(struct tegra_devfreq
> > *tegra, @@ -749,7 +733,6 @@ static struct devfreq_dev_profile
> > tegra_devfreq_profile = { static int
> > tegra_governor_get_target(struct devfreq *devfreq, unsigned long
> > *freq) {
> > -	struct device *ddev = devfreq->dev.parent;
> >  	struct devfreq_dev_status *stat;
> >  	struct tegra_devfreq *tegra;
> >  	struct tegra_devfreq_device *dev;
> > @@ -770,13 +753,11 @@ static int tegra_governor_get_target(struct
> > devfreq *devfreq, dev = &tegra->devices[i];
> >  
> >  		dev_target_freq = actmon_update_target(tegra, dev);
> > -
> >  		target_freq = max(target_freq, dev_target_freq);
> >  
> > -		dev_dbg(ddev, "%03x: upd: dev_target_freq %lu\n",
> > -			dev->config->offset, dev_target_freq);
> > -
> > -		actmon_device_debug(tegra, dev, "upd");
> > +		trace_device_target_freq(dev->config->offset,
> > dev_target_freq);
> > +		trace_device_target_update(tegra->regs,
> > dev->config->offset,
> > +					   dev->boost_freq,
> > cpufreq_get(0)); }
> >  
> >  	*freq = target_freq;
> > diff --git a/include/trace/events/tegra30_devfreq.h
> > b/include/trace/events/tegra30_devfreq.h new file mode 100644
> > index 000000000000..8f264a489daf
> > --- /dev/null
> > +++ b/include/trace/events/tegra30_devfreq.h
> > @@ -0,0 +1,105 @@
> > +/* SPDX-License-Identifier: GPL-2.0 */
> > +#undef TRACE_SYSTEM
> > +#define TRACE_SYSTEM tegra30_devfreq
> > +
> > +#if !defined(_TRACE_TEGRA30_DEVFREQ_H) ||
> > defined(TRACE_HEADER_MULTI_READ) +#define _TRACE_TEGRA30_DEVFREQ_H
> > +
> > +#include <linux/io.h>
> > +#include <linux/tracepoint.h>
> > +#include <linux/types.h>
> > +
> > +DECLARE_EVENT_CLASS(device_state,
> > +	TP_PROTO(void __iomem *base, u32 offset, u32 boost, u32
> > cpufreq),
> > +	TP_ARGS(base, offset, boost, cpufreq),
> > +	TP_STRUCT__entry(
> > +		__field(u32, offset)
> > +		__field(u32, intr_status)
> > +		__field(u32, ctrl)
> > +		__field(u32, avg_count)
> > +		__field(u32, avg_lower)
> > +		__field(u32, avg_upper)
> > +		__field(u32, count)
> > +		__field(u32, lower)
> > +		__field(u32, upper)
> > +		__field(u32, boost_freq)
> > +		__field(u32, cpu_freq)
> > +	),
> > +	TP_fast_assign(
> > +		__entry->offset		= offset;
> > +		__entry->intr_status	= readl_relaxed(base +
> > offset + 0x24);
> > +		__entry->ctrl		= readl_relaxed(base
> > + offset + 0x0);
> > +		__entry->avg_count	= readl_relaxed(base +
> > offset + 0x20);
> > +		__entry->avg_lower	= readl_relaxed(base +
> > offset + 0x14);
> > +		__entry->avg_upper	= readl_relaxed(base +
> > offset + 0x10);
> > +		__entry->count		= readl_relaxed(base
> > + offset + 0x1c);
> > +		__entry->lower		= readl_relaxed(base
> > + offset + 0x8);
> > +		__entry->upper		= readl_relaxed(base
> > + offset + 0x4);
> > +		__entry->boost_freq	= boost;
> > +		__entry->cpu_freq	= cpufreq;
> > +	),
> > +	TP_printk("%03x: intr 0x%08x ctrl 0x%08x avg %010u %010u
> > %010u cnt %010u %010u %010u boost %010u cpu %u",
> > +		__entry->offset,
> > +		__entry->intr_status,
> > +		__entry->ctrl,
> > +		__entry->avg_count,
> > +		__entry->avg_lower,
> > +		__entry->avg_upper,
> > +		__entry->count,
> > +		__entry->lower,
> > +		__entry->upper,
> > +		__entry->boost_freq,
> > +		__entry->cpu_freq)
> > +);
> > +
> > +DEFINE_EVENT(device_state, device_isr_enter,
> > +	TP_PROTO(void __iomem *base, u32 offset, u32 boost, u32
> > cpufreq),
> > +	TP_ARGS(base, offset, boost, cpufreq));
> > +
> > +DEFINE_EVENT(device_state, device_isr_exit,
> > +	TP_PROTO(void __iomem *base, u32 offset, u32 boost, u32
> > cpufreq),
> > +	TP_ARGS(base, offset, boost, cpufreq));
> > +
> > +DEFINE_EVENT(device_state, device_target_update,
> > +	TP_PROTO(void __iomem *base, u32 offset, u32 boost, u32
> > cpufreq),
> > +	TP_ARGS(base, offset, boost, cpufreq));
> > +
> > +TRACE_EVENT(device_lower_upper,
> > +	TP_PROTO(u32 offset, u32 target, u32 lower, u32 upper),
> > +	TP_ARGS(offset, target, lower, upper),
> > +	TP_STRUCT__entry(
> > +		__field(u32, offset)
> > +		__field(u32, target)
> > +		__field(u32, lower)
> > +		__field(u32, upper)
> > +	),
> > +	TP_fast_assign(
> > +		__entry->offset = offset;
> > +		__entry->target = target;
> > +		__entry->lower = lower;
> > +		__entry->upper = upper;
> > +	),
> > +	TP_printk("%03x: freq %010u lower freq %010u upper freq
> > %010u",
> > +		__entry->offset,
> > +		__entry->target,
> > +		__entry->lower,
> > +		__entry->upper)
> > +);
> > +
> > +TRACE_EVENT(device_target_freq,
> > +	TP_PROTO(u32 offset, u32 target),
> > +	TP_ARGS(offset, target),
> > +	TP_STRUCT__entry(
> > +		__field(u32, offset)
> > +		__field(u32, target)
> > +	),
> > +	TP_fast_assign(
> > +		__entry->offset = offset;
> > +		__entry->target = target;
> > +	),
> > +	TP_printk("%03x: freq %010u", __entry->offset,
> > __entry->target) +);
> > +#endif /* _TRACE_TEGRA30_DEVFREQ_H */
> > +
> > +/* This part must be outside protection */
> > +#include <trace/define_trace.h>
> >   
> 
> 


  reply	other threads:[~2019-07-19  0:46 UTC|newest]

Thread overview: 94+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-07-07 22:32 [PATCH v4 00/24] More improvements for Tegra30 devfreq driver Dmitry Osipenko
2019-07-07 22:32 ` [PATCH v4 01/24] PM / devfreq: tegra30: Change irq type to unsigned int Dmitry Osipenko
2019-07-16 11:35   ` Chanwoo Choi
2019-07-07 22:32 ` [PATCH v4 02/24] PM / devfreq: tegra30: Keep interrupt disabled while governor is stopped Dmitry Osipenko
2019-07-16 11:47   ` Chanwoo Choi
2019-07-16 13:03     ` Dmitry Osipenko
2019-07-17  6:37       ` Chanwoo Choi
2019-07-17 16:44         ` Dmitry Osipenko
2019-07-07 22:32 ` [PATCH v4 03/24] PM / devfreq: tegra30: Handle possible round-rate error Dmitry Osipenko
2019-07-16 11:50   ` Chanwoo Choi
2019-07-16 13:09     ` Dmitry Osipenko
2019-07-17  6:38       ` Chanwoo Choi
2019-07-07 22:32 ` [PATCH v4 04/24] PM / devfreq: tegra30: Drop write-barrier Dmitry Osipenko
2019-07-16 11:51   ` Chanwoo Choi
2019-07-07 22:32 ` [PATCH v4 05/24] PM / devfreq: tegra30: Set up watermarks properly Dmitry Osipenko
2019-07-18 10:17   ` Chanwoo Choi
2019-07-19  0:00     ` Dmitry Osipenko
2019-07-19  1:31       ` Chanwoo Choi
2019-07-07 22:32 ` [PATCH v4 06/24] PM / devfreq: tegra30: Tune up boosting thresholds Dmitry Osipenko
2019-07-16 11:55   ` Chanwoo Choi
2019-07-07 22:32 ` [PATCH v4 07/24] PM / devfreq: tegra30: Use CPUFreq notifier Dmitry Osipenko
2019-07-16 12:08   ` Chanwoo Choi
2019-07-16 13:18     ` Dmitry Osipenko
2019-07-07 22:32 ` [PATCH v4 08/24] PM / devfreq: tegra30: Move clk-notifier's registration to governor's start Dmitry Osipenko
2019-07-16 12:11   ` Chanwoo Choi
2019-07-07 22:32 ` [PATCH v4 09/24] PM / devfreq: tegra30: Reset boosting on startup Dmitry Osipenko
2019-07-16 12:13   ` Chanwoo Choi
2019-07-16 13:19     ` Dmitry Osipenko
2019-07-07 22:32 ` [PATCH v4 10/24] PM / devfreq: tegra30: Don't enable consecutive-down interrupt " Dmitry Osipenko
2019-07-16 12:17   ` Chanwoo Choi
2019-07-16 15:17     ` Dmitry Osipenko
2019-07-07 22:32 ` [PATCH v4 11/24] PM / devfreq: tegra30: Add debug messages Dmitry Osipenko
2019-07-16 12:23   ` Chanwoo Choi
2019-07-16 13:26     ` Dmitry Osipenko
2019-07-17  6:45       ` Chanwoo Choi
2019-07-17 15:46         ` Dmitry Osipenko
2019-07-18  9:07           ` Chanwoo Choi
2019-07-19  1:13             ` Dmitry Osipenko
2019-07-19  1:22               ` Chanwoo Choi
2019-07-19 17:10                 ` Dmitry Osipenko
2019-07-07 22:32 ` [PATCH v4 12/24] PM / devfreq: tegra30: Inline all one-line functions Dmitry Osipenko
2019-07-16 12:26   ` Chanwoo Choi
2019-07-16 13:35     ` Dmitry Osipenko
2019-07-18  9:09       ` Chanwoo Choi
2019-07-19  1:22         ` Dmitry Osipenko
2019-07-19  1:24           ` Chanwoo Choi
2019-07-19  1:27             ` Chanwoo Choi
2019-07-19  2:14               ` Dmitry Osipenko
2019-07-19  6:01                 ` Chanwoo Choi
2019-07-19 16:52                   ` Dmitry Osipenko
2019-07-07 22:32 ` [PATCH v4 13/24] PM / devfreq: tegra30: Constify structs Dmitry Osipenko
2019-07-16 12:26   ` Chanwoo Choi
2019-07-07 22:32 ` [PATCH v4 14/24] PM / devfreq: tegra30: Ensure that target freq won't overflow Dmitry Osipenko
2019-07-16 12:30   ` Chanwoo Choi
2019-07-16 13:59     ` Dmitry Osipenko
2019-07-07 22:32 ` [PATCH v4 15/24] PM / devfreq: tegra30: Fix integer overflow on CPU's freq max out Dmitry Osipenko
2019-07-16 12:32   ` Chanwoo Choi
2019-07-07 22:32 ` [PATCH v4 16/24] PM / devfreq: tegra30: Use kHz units uniformly in the code Dmitry Osipenko
2019-07-07 22:32 ` [PATCH v4 17/24] PM / devfreq: tegra30: Use tracepoints for debugging Dmitry Osipenko
2019-07-18  9:47   ` Chanwoo Choi
2019-07-19  0:49     ` Dmitry Osipenko [this message]
2019-07-19  1:01       ` Chanwoo Choi
2019-07-19  1:50         ` Dmitry Osipenko
2019-07-07 22:32 ` [PATCH v4 18/24] PM / devfreq: tegra30: Optimize CPUFreq notifier Dmitry Osipenko
2019-07-18  9:48   ` Chanwoo Choi
2019-07-19  0:42     ` Dmitry Osipenko
2019-07-19  1:09       ` Chanwoo Choi
2019-07-07 22:32 ` [PATCH v4 19/24] PM / devfreq: tegra30: Optimize upper consecutive watermark selection Dmitry Osipenko
2019-07-18  9:51   ` Chanwoo Choi
2019-07-19  0:40     ` Dmitry Osipenko
2019-07-19  1:15       ` Chanwoo Choi
2019-07-19  1:17         ` Chanwoo Choi
2019-07-07 22:32 ` [PATCH v4 20/24] PM / devfreq: tegra30: Optimize upper average " Dmitry Osipenko
2019-07-19  1:36   ` Chanwoo Choi
2019-07-19  1:59     ` Dmitry Osipenko
2019-07-19  2:06       ` Chanwoo Choi
2019-07-19  2:21         ` Dmitry Osipenko
2019-07-19  6:09           ` Chanwoo Choi
2019-07-19  6:11             ` Chanwoo Choi
2019-07-19 17:52               ` Dmitry Osipenko
2019-07-24 11:17                 ` Chanwoo Choi
2019-07-24 11:19                   ` Chanwoo Choi
2019-07-07 22:33 ` [PATCH v4 21/24] PM / devfreq: tegra30: Synchronize average count on target's update Dmitry Osipenko
2019-07-18 10:15   ` Chanwoo Choi
2019-07-19  0:31     ` Dmitry Osipenko
2019-07-19  1:40       ` Chanwoo Choi
2019-07-19 16:46         ` Dmitry Osipenko
2019-07-07 22:33 ` [PATCH v4 22/24] PM / devfreq: tegra30: Include appropriate header Dmitry Osipenko
2019-07-18  9:58   ` Chanwoo Choi
2019-07-19  0:34     ` Dmitry Osipenko
2019-07-07 22:33 ` [PATCH v4 23/24] PM / devfreq: tegra30: Increase sampling period to 16ms Dmitry Osipenko
2019-07-18 10:00   ` Chanwoo Choi
2019-07-07 22:33 ` [PATCH v4 24/24] PM / devfreq: tegra20/30: Add Dmitry as a maintainer Dmitry Osipenko
2019-07-18  9:56   ` Chanwoo Choi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190719034938.6382f989@dimatab \
    --to=digetx@gmail.com \
    --cc=cw00.choi@samsung.com \
    --cc=jonathanh@nvidia.com \
    --cc=kyungmin.park@samsung.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=linux-tegra@vger.kernel.org \
    --cc=myungjoo.ham@samsung.com \
    --cc=thierry.reding@gmail.com \
    --cc=tomeu.vizoso@collabora.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).