* [PATCH] cpufreq: ti-cpufreq: Add support for OPP_PLUS
@ 2020-02-11 7:23 Lokesh Vutla
2020-02-12 4:11 ` Viresh Kumar
0 siblings, 1 reply; 5+ messages in thread
From: Lokesh Vutla @ 2020-02-11 7:23 UTC (permalink / raw)
To: viresh.kumar, linux-pm
Cc: Tero Kristo, Dave Gerlach, Sekhar Nori, Lokesh Vutla,
Linux ARM Mailing List
DRA762 SoC introduces OPP_PLUS which runs at 1.8GHz. Add
support for this OPP in ti-cpufreq driver.
Acked-by: Dave Gerlach <d-gerlach@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
---
drivers/cpufreq/ti-cpufreq.c | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/drivers/cpufreq/ti-cpufreq.c b/drivers/cpufreq/ti-cpufreq.c
index 557cb513bf7f..ab0de27539ad 100644
--- a/drivers/cpufreq/ti-cpufreq.c
+++ b/drivers/cpufreq/ti-cpufreq.c
@@ -25,11 +25,14 @@
#define DRA7_EFUSE_HAS_OD_MPU_OPP 11
#define DRA7_EFUSE_HAS_HIGH_MPU_OPP 15
+#define DRA76_EFUSE_HAS_PLUS_MPU_OPP 18
#define DRA7_EFUSE_HAS_ALL_MPU_OPP 23
+#define DRA76_EFUSE_HAS_ALL_MPU_OPP 24
#define DRA7_EFUSE_NOM_MPU_OPP BIT(0)
#define DRA7_EFUSE_OD_MPU_OPP BIT(1)
#define DRA7_EFUSE_HIGH_MPU_OPP BIT(2)
+#define DRA76_EFUSE_PLUS_MPU_OPP BIT(3)
#define OMAP3_CONTROL_DEVICE_STATUS 0x4800244C
#define OMAP3_CONTROL_IDCODE 0x4830A204
@@ -80,6 +83,10 @@ static unsigned long dra7_efuse_xlate(struct ti_cpufreq_data *opp_data,
*/
switch (efuse) {
+ case DRA76_EFUSE_HAS_PLUS_MPU_OPP:
+ case DRA76_EFUSE_HAS_ALL_MPU_OPP:
+ calculated_efuse |= DRA76_EFUSE_PLUS_MPU_OPP;
+ /* Fall through */
case DRA7_EFUSE_HAS_ALL_MPU_OPP:
case DRA7_EFUSE_HAS_HIGH_MPU_OPP:
calculated_efuse |= DRA7_EFUSE_HIGH_MPU_OPP;
--
2.23.0
^ permalink raw reply related [flat|nested] 5+ messages in thread* Re: [PATCH] cpufreq: ti-cpufreq: Add support for OPP_PLUS
2020-02-11 7:23 [PATCH] cpufreq: ti-cpufreq: Add support for OPP_PLUS Lokesh Vutla
@ 2020-02-12 4:11 ` Viresh Kumar
0 siblings, 0 replies; 5+ messages in thread
From: Viresh Kumar @ 2020-02-12 4:11 UTC (permalink / raw)
To: Lokesh Vutla
Cc: linux-pm, Tero Kristo, Dave Gerlach, Sekhar Nori, Linux ARM Mailing List
On 11-02-20, 12:53, Lokesh Vutla wrote:
> DRA762 SoC introduces OPP_PLUS which runs at 1.8GHz. Add
> support for this OPP in ti-cpufreq driver.
>
> Acked-by: Dave Gerlach <d-gerlach@ti.com>
> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
> ---
> drivers/cpufreq/ti-cpufreq.c | 7 +++++++
> 1 file changed, 7 insertions(+)
>
> diff --git a/drivers/cpufreq/ti-cpufreq.c b/drivers/cpufreq/ti-cpufreq.c
> index 557cb513bf7f..ab0de27539ad 100644
> --- a/drivers/cpufreq/ti-cpufreq.c
> +++ b/drivers/cpufreq/ti-cpufreq.c
> @@ -25,11 +25,14 @@
>
> #define DRA7_EFUSE_HAS_OD_MPU_OPP 11
> #define DRA7_EFUSE_HAS_HIGH_MPU_OPP 15
> +#define DRA76_EFUSE_HAS_PLUS_MPU_OPP 18
> #define DRA7_EFUSE_HAS_ALL_MPU_OPP 23
> +#define DRA76_EFUSE_HAS_ALL_MPU_OPP 24
>
> #define DRA7_EFUSE_NOM_MPU_OPP BIT(0)
> #define DRA7_EFUSE_OD_MPU_OPP BIT(1)
> #define DRA7_EFUSE_HIGH_MPU_OPP BIT(2)
> +#define DRA76_EFUSE_PLUS_MPU_OPP BIT(3)
>
> #define OMAP3_CONTROL_DEVICE_STATUS 0x4800244C
> #define OMAP3_CONTROL_IDCODE 0x4830A204
> @@ -80,6 +83,10 @@ static unsigned long dra7_efuse_xlate(struct ti_cpufreq_data *opp_data,
> */
>
> switch (efuse) {
> + case DRA76_EFUSE_HAS_PLUS_MPU_OPP:
> + case DRA76_EFUSE_HAS_ALL_MPU_OPP:
> + calculated_efuse |= DRA76_EFUSE_PLUS_MPU_OPP;
> + /* Fall through */
> case DRA7_EFUSE_HAS_ALL_MPU_OPP:
> case DRA7_EFUSE_HAS_HIGH_MPU_OPP:
> calculated_efuse |= DRA7_EFUSE_HIGH_MPU_OPP;
Applied. Thanks.
--
viresh
^ permalink raw reply [flat|nested] 5+ messages in thread
* [PATCH] cpufreq: ti-cpufreq: Add support for OPP_PLUS
@ 2020-02-28 14:45 Tero Kristo
2020-03-02 4:19 ` Viresh Kumar
0 siblings, 1 reply; 5+ messages in thread
From: Tero Kristo @ 2020-02-28 14:45 UTC (permalink / raw)
To: rjw, viresh.kumar, linux-pm; +Cc: linux-kernel, Lokesh Vutla
From: Lokesh Vutla <lokeshvutla@ti.com>
DRA762 SoC introduces OPP_PLUS which runs at 1.8GHz. Add
support for this OPP in ti-cpufreq driver.
Acked-by: Dave Gerlach <d-gerlach@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
drivers/cpufreq/ti-cpufreq.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/drivers/cpufreq/ti-cpufreq.c b/drivers/cpufreq/ti-cpufreq.c
index 557cb513bf7f..d62b6b21325a 100644
--- a/drivers/cpufreq/ti-cpufreq.c
+++ b/drivers/cpufreq/ti-cpufreq.c
@@ -25,11 +25,14 @@
#define DRA7_EFUSE_HAS_OD_MPU_OPP 11
#define DRA7_EFUSE_HAS_HIGH_MPU_OPP 15
+#define DRA76_EFUSE_HAS_PLUS_MPU_OPP 18
#define DRA7_EFUSE_HAS_ALL_MPU_OPP 23
+#define DRA76_EFUSE_HAS_ALL_MPU_OPP 24
#define DRA7_EFUSE_NOM_MPU_OPP BIT(0)
#define DRA7_EFUSE_OD_MPU_OPP BIT(1)
#define DRA7_EFUSE_HIGH_MPU_OPP BIT(2)
+#define DRA76_EFUSE_PLUS_MPU_OPP BIT(3)
#define OMAP3_CONTROL_DEVICE_STATUS 0x4800244C
#define OMAP3_CONTROL_IDCODE 0x4830A204
@@ -80,6 +83,9 @@ static unsigned long dra7_efuse_xlate(struct ti_cpufreq_data *opp_data,
*/
switch (efuse) {
+ case DRA76_EFUSE_HAS_PLUS_MPU_OPP:
+ case DRA76_EFUSE_HAS_ALL_MPU_OPP:
+ calculated_efuse |= DRA76_EFUSE_PLUS_MPU_OPP;
case DRA7_EFUSE_HAS_ALL_MPU_OPP:
case DRA7_EFUSE_HAS_HIGH_MPU_OPP:
calculated_efuse |= DRA7_EFUSE_HIGH_MPU_OPP;
--
2.17.1
--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
^ permalink raw reply related [flat|nested] 5+ messages in thread* Re: [PATCH] cpufreq: ti-cpufreq: Add support for OPP_PLUS
2020-02-28 14:45 Tero Kristo
@ 2020-03-02 4:19 ` Viresh Kumar
2020-03-02 9:22 ` Tero Kristo
0 siblings, 1 reply; 5+ messages in thread
From: Viresh Kumar @ 2020-03-02 4:19 UTC (permalink / raw)
To: Tero Kristo; +Cc: rjw, linux-pm, linux-kernel, Lokesh Vutla
On 28-02-20, 16:45, Tero Kristo wrote:
> From: Lokesh Vutla <lokeshvutla@ti.com>
>
> DRA762 SoC introduces OPP_PLUS which runs at 1.8GHz. Add
> support for this OPP in ti-cpufreq driver.
>
> Acked-by: Dave Gerlach <d-gerlach@ti.com>
> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
> Signed-off-by: Tero Kristo <t-kristo@ti.com>
> ---
> drivers/cpufreq/ti-cpufreq.c | 6 ++++++
> 1 file changed, 6 insertions(+)
>
> diff --git a/drivers/cpufreq/ti-cpufreq.c b/drivers/cpufreq/ti-cpufreq.c
> index 557cb513bf7f..d62b6b21325a 100644
> --- a/drivers/cpufreq/ti-cpufreq.c
> +++ b/drivers/cpufreq/ti-cpufreq.c
> @@ -25,11 +25,14 @@
>
> #define DRA7_EFUSE_HAS_OD_MPU_OPP 11
> #define DRA7_EFUSE_HAS_HIGH_MPU_OPP 15
> +#define DRA76_EFUSE_HAS_PLUS_MPU_OPP 18
> #define DRA7_EFUSE_HAS_ALL_MPU_OPP 23
> +#define DRA76_EFUSE_HAS_ALL_MPU_OPP 24
>
> #define DRA7_EFUSE_NOM_MPU_OPP BIT(0)
> #define DRA7_EFUSE_OD_MPU_OPP BIT(1)
> #define DRA7_EFUSE_HIGH_MPU_OPP BIT(2)
> +#define DRA76_EFUSE_PLUS_MPU_OPP BIT(3)
>
> #define OMAP3_CONTROL_DEVICE_STATUS 0x4800244C
> #define OMAP3_CONTROL_IDCODE 0x4830A204
> @@ -80,6 +83,9 @@ static unsigned long dra7_efuse_xlate(struct ti_cpufreq_data *opp_data,
> */
>
> switch (efuse) {
> + case DRA76_EFUSE_HAS_PLUS_MPU_OPP:
> + case DRA76_EFUSE_HAS_ALL_MPU_OPP:
> + calculated_efuse |= DRA76_EFUSE_PLUS_MPU_OPP;
> case DRA7_EFUSE_HAS_ALL_MPU_OPP:
> case DRA7_EFUSE_HAS_HIGH_MPU_OPP:
> calculated_efuse |= DRA7_EFUSE_HIGH_MPU_OPP;
This is already merged, why sending it again ?
--
viresh
^ permalink raw reply [flat|nested] 5+ messages in thread* Re: [PATCH] cpufreq: ti-cpufreq: Add support for OPP_PLUS
2020-03-02 4:19 ` Viresh Kumar
@ 2020-03-02 9:22 ` Tero Kristo
0 siblings, 0 replies; 5+ messages in thread
From: Tero Kristo @ 2020-03-02 9:22 UTC (permalink / raw)
To: Viresh Kumar; +Cc: rjw, linux-pm, linux-kernel, Lokesh Vutla
On 02/03/2020 06:19, Viresh Kumar wrote:
> On 28-02-20, 16:45, Tero Kristo wrote:
>> From: Lokesh Vutla <lokeshvutla@ti.com>
>>
>> DRA762 SoC introduces OPP_PLUS which runs at 1.8GHz. Add
>> support for this OPP in ti-cpufreq driver.
>>
>> Acked-by: Dave Gerlach <d-gerlach@ti.com>
>> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
>> Signed-off-by: Tero Kristo <t-kristo@ti.com>
>> ---
>> drivers/cpufreq/ti-cpufreq.c | 6 ++++++
>> 1 file changed, 6 insertions(+)
>>
>> diff --git a/drivers/cpufreq/ti-cpufreq.c b/drivers/cpufreq/ti-cpufreq.c
>> index 557cb513bf7f..d62b6b21325a 100644
>> --- a/drivers/cpufreq/ti-cpufreq.c
>> +++ b/drivers/cpufreq/ti-cpufreq.c
>> @@ -25,11 +25,14 @@
>>
>> #define DRA7_EFUSE_HAS_OD_MPU_OPP 11
>> #define DRA7_EFUSE_HAS_HIGH_MPU_OPP 15
>> +#define DRA76_EFUSE_HAS_PLUS_MPU_OPP 18
>> #define DRA7_EFUSE_HAS_ALL_MPU_OPP 2
>> +#define DRA76_EFUSE_HAS_ALL_MPU_OPP 24
>>
>> #define DRA7_EFUSE_NOM_MPU_OPP BIT(0)
>> #define DRA7_EFUSE_OD_MPU_OPP BIT(1)
>> #define DRA7_EFUSE_HIGH_MPU_OPP BIT(2)
>> +#define DRA76_EFUSE_PLUS_MPU_OPP BIT(3)
>>
>> #define OMAP3_CONTROL_DEVICE_STATUS 0x4800244C
>> #define OMAP3_CONTROL_IDCODE 0x4830A204
>> @@ -80,6 +83,9 @@ static unsigned long dra7_efuse_xlate(struct ti_cpufreq_data *opp_data,
>> */
>>
>> switch (efuse) {
>> + case DRA76_EFUSE_HAS_PLUS_MPU_OPP:
>> + case DRA76_EFUSE_HAS_ALL_MPU_OPP:
>> + calculated_efuse |= DRA76_EFUSE_PLUS_MPU_OPP;
>> case DRA7_EFUSE_HAS_ALL_MPU_OPP:
>> case DRA7_EFUSE_HAS_HIGH_MPU_OPP:
>> calculated_efuse |= DRA7_EFUSE_HIGH_MPU_OPP;
>
> This is already merged, why sending it again ?
Oops sorry, seems I was looking at stale local upstream branch when
checking what is still missing upstream. Please ignore.
-Tero
--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2020-03-02 9:23 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-02-11 7:23 [PATCH] cpufreq: ti-cpufreq: Add support for OPP_PLUS Lokesh Vutla
2020-02-12 4:11 ` Viresh Kumar
2020-02-28 14:45 Tero Kristo
2020-03-02 4:19 ` Viresh Kumar
2020-03-02 9:22 ` Tero Kristo
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).