Linux-PM Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH] interconnect: Show bandwidth for disabled paths as zero in debugfs
@ 2020-07-29 17:50 Matthias Kaehlcke
  0 siblings, 0 replies; only message in thread
From: Matthias Kaehlcke @ 2020-07-29 17:50 UTC (permalink / raw)
  To: Georgi Djakov
  Cc: linux-kernel, linux-pm, Evan Green, Douglas Anderson, Matthias Kaehlcke

For disabled paths the 'interconnect_summary' in debugfs currently shows
the orginally requested bandwidths. This is confusing, since the bandwidth
requests aren't active. Instead show the bandwidths for disabled
paths/requests as zero.

Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
---

 drivers/interconnect/core.c | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

diff --git a/drivers/interconnect/core.c b/drivers/interconnect/core.c
index 609e206bf598..3491175304d1 100644
--- a/drivers/interconnect/core.c
+++ b/drivers/interconnect/core.c
@@ -55,12 +55,18 @@ static int icc_summary_show(struct seq_file *s, void *data)
 
 			icc_summary_show_one(s, n);
 			hlist_for_each_entry(r, &n->req_list, req_node) {
+				u32 avg_bw = 0, peak_bw = 0;
+
 				if (!r->dev)
 					continue;
 
+				if (r->enabled) {
+					avg_bw = r->avg_bw;
+					peak_bw = r->peak_bw;
+				}
+
 				seq_printf(s, "  %-27s %12u %12u %12u\n",
-					   dev_name(r->dev), r->tag, r->avg_bw,
-					   r->peak_bw);
+					   dev_name(r->dev), r->tag, avg_bw, peak_bw);
 			}
 		}
 	}
-- 
2.28.0.rc0.142.g3c755180ce-goog


^ permalink raw reply	[flat|nested] only message in thread

only message in thread, back to index

Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-07-29 17:50 [PATCH] interconnect: Show bandwidth for disabled paths as zero in debugfs Matthias Kaehlcke

Linux-PM Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-pm/0 linux-pm/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-pm linux-pm/ https://lore.kernel.org/linux-pm \
		linux-pm@vger.kernel.org
	public-inbox-index linux-pm

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-pm


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git