From: Leonard Crestez <leonard.crestez@nxp.com>
To: Chanwoo Choi <cw00.choi@samsung.com>,
Stephen Boyd <sboyd@kernel.org>, Rob Herring <robh+dt@kernel.org>
Cc: "MyungJoo Ham" <myungjoo.ham@samsung.com>,
"Kyungmin Park" <kyungmin.park@samsung.com>,
"Rafael J. Wysocki" <rjw@rjwysocki.net>,
"Shawn Guo" <shawnguo@kernel.org>,
"Mark Rutland" <mark.rutland@arm.com>,
"Michael Turquette" <mturquette@baylibre.com>,
"Artur Świgoń" <a.swigon@partner.samsung.com>,
"Saravana Kannan" <saravanak@google.com>,
"Angus Ainslie" <angus@akkea.ca>,
"Martin Kepplinger" <martink@posteo.de>,
"Matthias Kaehlcke" <mka@chromium.org>,
"Krzysztof Kozlowski" <krzk@kernel.org>,
"Alexandre Bailon" <abailon@baylibre.com>,
"Georgi Djakov" <georgi.djakov@linaro.org>,
"Dong Aisheng" <aisheng.dong@nxp.com>,
"Abel Vesa" <abel.vesa@nxp.com>, "Jacky Bai" <ping.bai@nxp.com>,
"Anson Huang" <Anson.Huang@nxp.com>,
"Fabio Estevam" <fabio.estevam@nxp.com>,
"Viresh Kumar" <viresh.kumar@linaro.org>,
"Silvano di Ninno" <silvano.dininno@nxp.com>,
devicetree@vger.kernel.org, linux-pm@vger.kernel.org,
linux-clk@vger.kernel.org, linux-imx@nxp.com,
kernel@pengutronix.de, linux-arm-kernel@lists.infradead.org
Subject: [PATCH v6 1/5] clk: imx8m: Set CLK_GET_RATE_NOCACHE on dram clocks
Date: Thu, 14 Nov 2019 20:33:18 +0200 [thread overview]
Message-ID: <238d7fba864e2170b9f31fc421455b3c10b18a92.1573756360.git.leonard.crestez@nxp.com> (raw)
In-Reply-To: <cover.1573756360.git.leonard.crestez@nxp.com>
In-Reply-To: <cover.1573756360.git.leonard.crestez@nxp.com>
These clocks are only modified as part of DRAM frequency switches during
which DRAM itself is briefly inaccessible. The switch is performed with
a SMC call to by TF-A which runs from a SRAM area; upon returning to
linux several clocks bits are modified and we need to update them.
For rate bits an easy solution is to just mark with
CLK_GET_RATE_NOCACHE so that new rates are always read back from
registers.
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@nxp.com>
---
drivers/clk/imx/clk-imx8mm.c | 9 +++++++--
drivers/clk/imx/clk-imx8mn.c | 10 ++++++++--
drivers/clk/imx/clk-imx8mq.c | 12 ++++++++----
3 files changed, 23 insertions(+), 8 deletions(-)
diff --git a/drivers/clk/imx/clk-imx8mm.c b/drivers/clk/imx/clk-imx8mm.c
index 030b15d7c0ce..e2bc3c90d93c 100644
--- a/drivers/clk/imx/clk-imx8mm.c
+++ b/drivers/clk/imx/clk-imx8mm.c
@@ -440,13 +440,18 @@ static int imx8mm_clocks_probe(struct platform_device *pdev)
/* IPG */
clks[IMX8MM_CLK_IPG_ROOT] = imx_clk_divider2("ipg_root", "ahb", base + 0x9080, 0, 1);
clks[IMX8MM_CLK_IPG_AUDIO_ROOT] = imx_clk_divider2("ipg_audio_root", "audio_ahb", base + 0x9180, 0, 1);
+ /*
+ * DRAM clocks are manipulated from TF-A outside clock framework.
+ * Mark with GET_RATE_NOCACHE to always read div value from hardware
+ */
+ clks[IMX8MM_CLK_DRAM_ALT] = __imx8m_clk_composite("dram_alt", imx8mm_dram_alt_sels, base + 0xa000, CLK_GET_RATE_NOCACHE);
+ clks[IMX8MM_CLK_DRAM_APB] = __imx8m_clk_composite("dram_apb", imx8mm_dram_apb_sels, base + 0xa080, CLK_IS_CRITICAL | CLK_GET_RATE_NOCACHE);
+
/* IP */
- clks[IMX8MM_CLK_DRAM_ALT] = imx8m_clk_composite("dram_alt", imx8mm_dram_alt_sels, base + 0xa000);
- clks[IMX8MM_CLK_DRAM_APB] = imx8m_clk_composite_critical("dram_apb", imx8mm_dram_apb_sels, base + 0xa080);
clks[IMX8MM_CLK_VPU_G1] = imx8m_clk_composite("vpu_g1", imx8mm_vpu_g1_sels, base + 0xa100);
clks[IMX8MM_CLK_VPU_G2] = imx8m_clk_composite("vpu_g2", imx8mm_vpu_g2_sels, base + 0xa180);
clks[IMX8MM_CLK_DISP_DTRC] = imx8m_clk_composite("disp_dtrc", imx8mm_disp_dtrc_sels, base + 0xa200);
clks[IMX8MM_CLK_DISP_DC8000] = imx8m_clk_composite("disp_dc8000", imx8mm_disp_dc8000_sels, base + 0xa280);
clks[IMX8MM_CLK_PCIE1_CTRL] = imx8m_clk_composite("pcie1_ctrl", imx8mm_pcie1_ctrl_sels, base + 0xa300);
diff --git a/drivers/clk/imx/clk-imx8mn.c b/drivers/clk/imx/clk-imx8mn.c
index 9f5a5a56b45e..de905e278b80 100644
--- a/drivers/clk/imx/clk-imx8mn.c
+++ b/drivers/clk/imx/clk-imx8mn.c
@@ -428,12 +428,18 @@ static int imx8mn_clocks_probe(struct platform_device *pdev)
clks[IMX8MN_CLK_AHB] = imx8m_clk_composite_critical("ahb", imx8mn_ahb_sels, base + 0x9000);
clks[IMX8MN_CLK_AUDIO_AHB] = imx8m_clk_composite("audio_ahb", imx8mn_audio_ahb_sels, base + 0x9100);
clks[IMX8MN_CLK_IPG_ROOT] = imx_clk_divider2("ipg_root", "ahb", base + 0x9080, 0, 1);
clks[IMX8MN_CLK_IPG_AUDIO_ROOT] = imx_clk_divider2("ipg_audio_root", "audio_ahb", base + 0x9180, 0, 1);
clks[IMX8MN_CLK_DRAM_CORE] = imx_clk_mux2_flags("dram_core_clk", base + 0x9800, 24, 1, imx8mn_dram_core_sels, ARRAY_SIZE(imx8mn_dram_core_sels), CLK_IS_CRITICAL);
- clks[IMX8MN_CLK_DRAM_ALT] = imx8m_clk_composite("dram_alt", imx8mn_dram_alt_sels, base + 0xa000);
- clks[IMX8MN_CLK_DRAM_APB] = imx8m_clk_composite_critical("dram_apb", imx8mn_dram_apb_sels, base + 0xa080);
+
+ /*
+ * DRAM clocks are manipulated from TF-A outside clock framework.
+ * Mark with GET_RATE_NOCACHE to always read div value from hardware
+ */
+ clks[IMX8MN_CLK_DRAM_ALT] = __imx8m_clk_composite("dram_alt", imx8mn_dram_alt_sels, base + 0xa000, CLK_GET_RATE_NOCACHE);
+ clks[IMX8MN_CLK_DRAM_APB] = __imx8m_clk_composite("dram_apb", imx8mn_dram_apb_sels, base + 0xa080, CLK_IS_CRITICAL | CLK_GET_RATE_NOCACHE);
+
clks[IMX8MN_CLK_DISP_PIXEL] = imx8m_clk_composite("disp_pixel", imx8mn_disp_pixel_sels, base + 0xa500);
clks[IMX8MN_CLK_SAI2] = imx8m_clk_composite("sai2", imx8mn_sai2_sels, base + 0xa600);
clks[IMX8MN_CLK_SAI3] = imx8m_clk_composite("sai3", imx8mn_sai3_sels, base + 0xa680);
clks[IMX8MN_CLK_SAI5] = imx8m_clk_composite("sai5", imx8mn_sai5_sels, base + 0xa780);
clks[IMX8MN_CLK_SAI6] = imx8m_clk_composite("sai6", imx8mn_sai6_sels, base + 0xa800);
diff --git a/drivers/clk/imx/clk-imx8mq.c b/drivers/clk/imx/clk-imx8mq.c
index 5f10a606d836..c8ab86fcba7c 100644
--- a/drivers/clk/imx/clk-imx8mq.c
+++ b/drivers/clk/imx/clk-imx8mq.c
@@ -341,11 +341,11 @@ static int imx8mq_clocks_probe(struct platform_device *pdev)
clks[IMX8MQ_VIDEO_PLL1_OUT] = imx_clk_gate("video_pll1_out", "video_pll1_bypass", base + 0x10, 21);
clks[IMX8MQ_SYS1_PLL_OUT] = imx_clk_fixed("sys1_pll_out", 800000000);
clks[IMX8MQ_SYS2_PLL_OUT] = imx_clk_fixed("sys2_pll_out", 1000000000);
clks[IMX8MQ_SYS3_PLL_OUT] = imx_clk_sccg_pll("sys3_pll_out", sys3_pll_out_sels, ARRAY_SIZE(sys3_pll_out_sels), 0, 0, 0, base + 0x48, CLK_IS_CRITICAL);
- clks[IMX8MQ_DRAM_PLL_OUT] = imx_clk_sccg_pll("dram_pll_out", dram_pll_out_sels, ARRAY_SIZE(dram_pll_out_sels), 0, 0, 0, base + 0x60, CLK_IS_CRITICAL);
+ clks[IMX8MQ_DRAM_PLL_OUT] = imx_clk_sccg_pll("dram_pll_out", dram_pll_out_sels, ARRAY_SIZE(dram_pll_out_sels), 0, 0, 0, base + 0x60, CLK_IS_CRITICAL | CLK_GET_RATE_NOCACHE);
clks[IMX8MQ_VIDEO2_PLL_OUT] = imx_clk_sccg_pll("video2_pll_out", video2_pll_out_sels, ARRAY_SIZE(video2_pll_out_sels), 0, 0, 0, base + 0x54, 0);
/* SYS PLL1 fixed output */
clks[IMX8MQ_SYS1_PLL_40M_CG] = imx_clk_gate("sys1_pll_40m_cg", "sys1_pll_out", base + 0x30, 9);
clks[IMX8MQ_SYS1_PLL_80M_CG] = imx_clk_gate("sys1_pll_80m_cg", "sys1_pll_out", base + 0x30, 11);
@@ -433,15 +433,19 @@ static int imx8mq_clocks_probe(struct platform_device *pdev)
/* IPG */
clks[IMX8MQ_CLK_IPG_ROOT] = imx_clk_divider2("ipg_root", "ahb", base + 0x9080, 0, 1);
clks[IMX8MQ_CLK_IPG_AUDIO_ROOT] = imx_clk_divider2("ipg_audio_root", "audio_ahb", base + 0x9180, 0, 1);
- /* IP */
+ /*
+ * DRAM clocks are manipulated from TF-A outside clock framework.
+ * Mark with GET_RATE_NOCACHE to always read div value from hardware
+ */
clks[IMX8MQ_CLK_DRAM_CORE] = imx_clk_mux2_flags("dram_core_clk", base + 0x9800, 24, 1, imx8mq_dram_core_sels, ARRAY_SIZE(imx8mq_dram_core_sels), CLK_IS_CRITICAL);
+ clks[IMX8MQ_CLK_DRAM_ALT] = __imx8m_clk_composite("dram_alt", imx8mq_dram_alt_sels, base + 0xa000, CLK_GET_RATE_NOCACHE);
+ clks[IMX8MQ_CLK_DRAM_APB] = __imx8m_clk_composite("dram_apb", imx8mq_dram_apb_sels, base + 0xa080, CLK_IS_CRITICAL | CLK_GET_RATE_NOCACHE);
- clks[IMX8MQ_CLK_DRAM_ALT] = imx8m_clk_composite("dram_alt", imx8mq_dram_alt_sels, base + 0xa000);
- clks[IMX8MQ_CLK_DRAM_APB] = imx8m_clk_composite_critical("dram_apb", imx8mq_dram_apb_sels, base + 0xa080);
+ /* IP */
clks[IMX8MQ_CLK_VPU_G1] = imx8m_clk_composite("vpu_g1", imx8mq_vpu_g1_sels, base + 0xa100);
clks[IMX8MQ_CLK_VPU_G2] = imx8m_clk_composite("vpu_g2", imx8mq_vpu_g2_sels, base + 0xa180);
clks[IMX8MQ_CLK_DISP_DTRC] = imx8m_clk_composite("disp_dtrc", imx8mq_disp_dtrc_sels, base + 0xa200);
clks[IMX8MQ_CLK_DISP_DC8000] = imx8m_clk_composite("disp_dc8000", imx8mq_disp_dc8000_sels, base + 0xa280);
clks[IMX8MQ_CLK_PCIE1_CTRL] = imx8m_clk_composite("pcie1_ctrl", imx8mq_pcie1_ctrl_sels, base + 0xa300);
--
2.17.1
next prev parent reply other threads:[~2019-11-14 18:33 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-11-14 18:33 [PATCH v6 0/5] PM / devfreq: Add dynamic scaling for imx8m ddr controller Leonard Crestez
2019-11-14 18:33 ` Leonard Crestez [this message]
2019-11-14 18:33 ` [PATCH v6 2/5] clk: imx: Mark dram pll on 8mm and 8mn with CLK_GET_RATE_NOCACHE Leonard Crestez
2019-11-14 18:33 ` [PATCH v6 3/5] dt-bindings: memory: Add bindings for imx8m ddr controller Leonard Crestez
2019-11-15 5:23 ` Chanwoo Choi
2019-11-21 21:00 ` Rob Herring
2019-11-14 18:33 ` [PATCH v6 4/5] PM / devfreq: Add dynamic scaling " Leonard Crestez
2019-11-15 1:31 ` Chanwoo Choi
2019-11-18 14:37 ` Leonard Crestez
2019-11-22 1:47 ` Chanwoo Choi
2019-11-14 18:33 ` [PATCH v6 5/5] arm64: dts: imx8m: Add ddr controller nodes Leonard Crestez
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=238d7fba864e2170b9f31fc421455b3c10b18a92.1573756360.git.leonard.crestez@nxp.com \
--to=leonard.crestez@nxp.com \
--cc=Anson.Huang@nxp.com \
--cc=a.swigon@partner.samsung.com \
--cc=abailon@baylibre.com \
--cc=abel.vesa@nxp.com \
--cc=aisheng.dong@nxp.com \
--cc=angus@akkea.ca \
--cc=cw00.choi@samsung.com \
--cc=devicetree@vger.kernel.org \
--cc=fabio.estevam@nxp.com \
--cc=georgi.djakov@linaro.org \
--cc=kernel@pengutronix.de \
--cc=krzk@kernel.org \
--cc=kyungmin.park@samsung.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-imx@nxp.com \
--cc=linux-pm@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=martink@posteo.de \
--cc=mka@chromium.org \
--cc=mturquette@baylibre.com \
--cc=myungjoo.ham@samsung.com \
--cc=ping.bai@nxp.com \
--cc=rjw@rjwysocki.net \
--cc=robh+dt@kernel.org \
--cc=saravanak@google.com \
--cc=sboyd@kernel.org \
--cc=shawnguo@kernel.org \
--cc=silvano.dininno@nxp.com \
--cc=viresh.kumar@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).