Linux-PM Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH] power: supply: sc27xx: Add POWER_SUPPLY_PROP_CHARGE_NOW attribute
@ 2020-02-14  5:38 Baolin Wang
  0 siblings, 0 replies; only message in thread
From: Baolin Wang @ 2020-02-14  5:38 UTC (permalink / raw)
  To: sre; +Cc: linux-pm, linux-kernel, baolin.wang7, zhang.lyra, orsonzhai

Add the POWER_SUPPLY_PROP_CHARGE_NOW attribute to allow user to get
current battery capacity (uAh) to do measurement.

Signed-off-by: Baolin Wang <baolin.wang7@gmail.com>
---
 drivers/power/supply/sc27xx_fuel_gauge.c |   12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/drivers/power/supply/sc27xx_fuel_gauge.c b/drivers/power/supply/sc27xx_fuel_gauge.c
index 469c83f..a7c8a84 100644
--- a/drivers/power/supply/sc27xx_fuel_gauge.c
+++ b/drivers/power/supply/sc27xx_fuel_gauge.c
@@ -614,6 +614,17 @@ static int sc27xx_fgu_get_property(struct power_supply *psy,
 		val->intval = data->total_cap * 1000;
 		break;
 
+	case POWER_SUPPLY_PROP_CHARGE_NOW:
+		ret = sc27xx_fgu_get_clbcnt(data, &value);
+		if (ret)
+			goto error;
+
+		value = DIV_ROUND_CLOSEST(value * 10,
+					  36 * SC27XX_FGU_SAMPLE_HZ);
+		val->intval = sc27xx_fgu_adc_to_current(data, value);
+
+		break;
+
 	default:
 		ret = -EINVAL;
 		break;
@@ -682,6 +693,7 @@ static int sc27xx_fgu_property_is_writeable(struct power_supply *psy,
 	POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE,
 	POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN,
 	POWER_SUPPLY_PROP_CALIBRATE,
+	POWER_SUPPLY_PROP_CHARGE_NOW
 };
 
 static const struct power_supply_desc sc27xx_fgu_desc = {
-- 
1.7.9.5


^ permalink raw reply	[flat|nested] only message in thread

only message in thread, back to index

Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-02-14  5:38 [PATCH] power: supply: sc27xx: Add POWER_SUPPLY_PROP_CHARGE_NOW attribute Baolin Wang

Linux-PM Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-pm/0 linux-pm/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-pm linux-pm/ https://lore.kernel.org/linux-pm \
		linux-pm@vger.kernel.org
	public-inbox-index linux-pm

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-pm


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git