[PATCHv3 0/6] arm: enable TI SoC thermal driver

[PATCHv3 0/6] arm: enable TI SoC thermal driver

[Eduardo Valentin]

Hello,

Idea is to add the missing bits under arch/arm/*omap* required
to enable by default the ti-soc-thermal driver. I am planing to
move it out of staging tree. This has been scheduled to 3.11.

It would be interesting to get
feedback from other ppl. By enabling it by default we could reach
more ppl for testing it across the supported chips.

The difference from v2 is that now the driver is changed to use
GPIO bindings for Tshut as suggested by Benoit and I added
a simple description what is bandgap.

The difference from v1 is just that patch 01 doe snot include the
dts prefix, as it is not supposed to be DTS related.


Eduardo Valentin (6):
  thermal: ti-soc-thermal: use standard GPIO DT bindings
  arm: introduce config HAS_BANDGAP
  arm: dts: add bandgap entry for OMAP443x devices
  arm: dts: add bandgap entry for OMAP4460 devices
  arm: omap2plus_defconfig: enable TI bandgap driver
  arm: omap2plus_defconfig: enable DRA752 thermal support by default

 arch/arm/Kconfig                                  |  3 +++
 arch/arm/boot/dts/omap443x.dtsi                   |  4 ++++
 arch/arm/boot/dts/omap4460.dtsi                   |  9 +++++++++
 arch/arm/configs/omap2plus_defconfig              | 12 ++++++++++++
 arch/arm/mach-omap2/Kconfig                       |  1 +
 drivers/staging/ti-soc-thermal/ti-bandgap.c       |  8 ++------
 drivers/staging/ti-soc-thermal/ti_soc_thermal.txt |  9 +++++----
 7 files changed, 36 insertions(+), 10 deletions(-)

-- 
1.8.2.1.342.gfa7285d

[PATCHv3 1/6] thermal: ti-soc-thermal: use standard GPIO DT bindings

[Eduardo Valentin]

This change updates the ti-soc-thermal driver to use
standard GPIO DT bindings to read the GPIO number associated
to thermal shutdown IRQ, in case the device features it.

Previously, the code was using a specific DT bindings.
As now OMAP supports the standard way to model GPIOs,
there is no point in having a ti specific binding.

Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Grant Likely <grant.likely@linaro.org>
Cc: Rob Herring <rob.herring@calxeda.com>
Cc: linux-pm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: devicetree-discuss@lists.ozlabs.org
Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
---
 drivers/staging/ti-soc-thermal/ti-bandgap.c       | 8 ++------
 drivers/staging/ti-soc-thermal/ti_soc_thermal.txt | 9 +++++----
 2 files changed, 7 insertions(+), 10 deletions(-)

diff --git a/drivers/staging/ti-soc-thermal/ti-bandgap.c b/drivers/staging/ti-soc-thermal/ti-bandgap.c
index f20c1cf..c7fc0d0 100644
--- a/drivers/staging/ti-soc-thermal/ti-bandgap.c
+++ b/drivers/staging/ti-soc-thermal/ti-bandgap.c
@@ -38,6 +38,7 @@
 #include <linux/of_device.h>
 #include <linux/of_platform.h>
 #include <linux/of_irq.h>
+#include <linux/of_gpio.h>
 #include <linux/io.h>
 
 #include "ti-bandgap.h"
@@ -1123,7 +1124,6 @@ static struct ti_bandgap *ti_bandgap_build(struct platform_device *pdev)
 	const struct of_device_id *of_id;
 	struct ti_bandgap *bgp;
 	struct resource *res;
-	u32 prop;
 	int i;
 
 	/* just for the sake */
@@ -1167,11 +1167,7 @@ static struct ti_bandgap *ti_bandgap_build(struct platform_device *pdev)
 	} while (res);
 
 	if (TI_BANDGAP_HAS(bgp, TSHUT)) {
-		if (of_property_read_u32(node, "ti,tshut-gpio", &prop) < 0) {
-			dev_err(&pdev->dev, "missing tshut gpio in device tree\n");
-			return ERR_PTR(-EINVAL);
-		}
-		bgp->tshut_gpio = prop;
+		bgp->tshut_gpio = of_get_gpio(node, 0);
 		if (!gpio_is_valid(bgp->tshut_gpio)) {
 			dev_err(&pdev->dev, "invalid gpio for tshut (%d)\n",
 				bgp->tshut_gpio);
diff --git a/drivers/staging/ti-soc-thermal/ti_soc_thermal.txt b/drivers/staging/ti-soc-thermal/ti_soc_thermal.txt
index a4a33d1..382bd98 100644
--- a/drivers/staging/ti-soc-thermal/ti_soc_thermal.txt
+++ b/drivers/staging/ti-soc-thermal/ti_soc_thermal.txt
@@ -17,8 +17,9 @@ Required properties:
 - interrupts : this entry should indicate which interrupt line
 the talert signal is routed to;
 Specific:
-- ti,tshut-gpio : this entry should be used to inform which GPIO
-line the tshut signal is routed to;
+- gpios : this entry should be used to inform which GPIO
+line the tshut signal is routed to. The informed GPIO will
+be treated as an IRQ;
 - regs : this entry must also be specified and it is specific
 to each bandgap version, because the mapping may change from
 soc to soc, apart of depending on available features.
@@ -37,7 +38,7 @@ bandgap {
 		0x4a002378 0x18>;
 	compatible = "ti,omap4460-bandgap";
 	interrupts = <0 126 4>; /* talert */
-	ti,tshut-gpio = <86>;
+	gpios = <&gpio3 22 0>; /* tshut */
 };
 
 OMAP4470:
@@ -47,7 +48,7 @@ bandgap {
 		0x4a002378 0x18>;
 	compatible = "ti,omap4470-bandgap";
 	interrupts = <0 126 4>; /* talert */
-	ti,tshut-gpio = <86>;
+	gpios = <&gpio3 22 0>; /* tshut */
 };
 
 OMAP5430:
-- 
1.8.2.1.342.gfa7285d

[PATCHv4 1/6] thermal: ti-soc-thermal: use standard GPIO DT bindings

[Eduardo Valentin]

This change updates the ti-soc-thermal driver to use
standard GPIO DT bindings to read the GPIO number associated
to thermal shutdown IRQ, in case the device features it.

Previously, the code was using a specific DT bindings.
As now OMAP supports the standard way to model GPIOs,
there is no point in having a ti specific binding.

Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Grant Likely <grant.likely@linaro.org>
Cc: Rob Herring <rob.herring@calxeda.com>
Cc: linux-pm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: devicetree-discuss@lists.ozlabs.org
Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
---
 Documentation/devicetree/bindings/thermal/ti_soc_thermal.txt | 9 +++++----
 drivers/thermal/ti-soc-thermal/ti-bandgap.c                  | 8 ++------
 2 files changed, 7 insertions(+), 10 deletions(-)
---
Rui,

This is the rebased version of patch 01. It has been rebased on
your thermal/next. Please send it for 3.11. All remaining patches
on this series have been applied to respective for_3.11 branches
on corresponding trees.

diff --git a/Documentation/devicetree/bindings/thermal/ti_soc_thermal.txt b/Documentation/devicetree/bindings/thermal/ti_soc_thermal.txt
index 1953b33..0c9222d 100644
--- a/Documentation/devicetree/bindings/thermal/ti_soc_thermal.txt
+++ b/Documentation/devicetree/bindings/thermal/ti_soc_thermal.txt
@@ -17,8 +17,9 @@ Required properties:
 - interrupts : this entry should indicate which interrupt line
 the talert signal is routed to;
 Specific:
-- ti,tshut-gpio : this entry should be used to inform which GPIO
-line the tshut signal is routed to;
+- gpios : this entry should be used to inform which GPIO
+line the tshut signal is routed to. The informed GPIO will
+be treated as an IRQ;
 - regs : this entry must also be specified and it is specific
 to each bandgap version, because the mapping may change from
 soc to soc, apart of depending on available features.
@@ -37,7 +38,7 @@ bandgap {
 		0x4a002378 0x18>;
 	compatible = "ti,omap4460-bandgap";
 	interrupts = <0 126 4>; /* talert */
-	ti,tshut-gpio = <86>;
+	gpios = <&gpio3 22 0>; /* tshut */
 };
 
 OMAP4470:
@@ -47,7 +48,7 @@ bandgap {
 		0x4a002378 0x18>;
 	compatible = "ti,omap4470-bandgap";
 	interrupts = <0 126 4>; /* talert */
-	ti,tshut-gpio = <86>;
+	gpios = <&gpio3 22 0>; /* tshut */
 };
 
 OMAP5430:
diff --git a/drivers/thermal/ti-soc-thermal/ti-bandgap.c b/drivers/thermal/ti-soc-thermal/ti-bandgap.c
index 7c0b3eb..9dfd471 100644
--- a/drivers/thermal/ti-soc-thermal/ti-bandgap.c
+++ b/drivers/thermal/ti-soc-thermal/ti-bandgap.c
@@ -38,6 +38,7 @@
 #include <linux/of_device.h>
 #include <linux/of_platform.h>
 #include <linux/of_irq.h>
+#include <linux/of_gpio.h>
 #include <linux/io.h>
 
 #include "ti-bandgap.h"
@@ -1129,7 +1130,6 @@ static struct ti_bandgap *ti_bandgap_build(struct platform_device *pdev)
 	const struct of_device_id *of_id;
 	struct ti_bandgap *bgp;
 	struct resource *res;
-	u32 prop;
 	int i;
 
 	/* just for the sake */
@@ -1173,11 +1173,7 @@ static struct ti_bandgap *ti_bandgap_build(struct platform_device *pdev)
 	} while (res);
 
 	if (TI_BANDGAP_HAS(bgp, TSHUT)) {
-		if (of_property_read_u32(node, "ti,tshut-gpio", &prop) < 0) {
-			dev_err(&pdev->dev, "missing tshut gpio in device tree\n");
-			return ERR_PTR(-EINVAL);
-		}
-		bgp->tshut_gpio = prop;
+		bgp->tshut_gpio = of_get_gpio(node, 0);
 		if (!gpio_is_valid(bgp->tshut_gpio)) {
 			dev_err(&pdev->dev, "invalid gpio for tshut (%d)\n",
 				bgp->tshut_gpio);
-- 
1.8.2.1.342.gfa7285d

[PATCHv3 2/6] arm: introduce config HAS_BANDGAP

[Eduardo Valentin]

Bandgap is a device used to measure temperature on
electronic equipments. It is widely used in digital
integrated circuits. It is based on the dependency
between silicon voltage and temperature.

This patch introduce HAS_BANDGAP config entry.
This config is a boolean value so that arch
code can flag if they feature a bandgap device.

This config entry follows the same idea behind
ARCH_HAS_CPUFREQ.

Cc: Russell King <linux@arm.linux.org.uk>
Cc: Tony Lindgren <tony@atomide.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-omap@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: Fabio Stevam <festevam@gmail.com>
Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
---
 arch/arm/Kconfig            | 3 +++
 arch/arm/mach-omap2/Kconfig | 1 +
 2 files changed, 4 insertions(+)

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index d423d58..bcbdec9 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -174,6 +174,9 @@ config ARCH_HAS_CPUFREQ
 	  and that the relevant menu configurations are displayed for
 	  it.
 
+config ARCH_HAS_BANDGAP
+	bool
+
 config GENERIC_HWEIGHT
 	bool
 	default y
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index f49cd51..8620ab5 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -4,6 +4,7 @@ config ARCH_OMAP
 config ARCH_OMAP2PLUS
 	bool "TI OMAP2/3/4/5 SoCs with device tree support" if (ARCH_MULTI_V6 || ARCH_MULTI_V7)
 	select ARCH_HAS_CPUFREQ
+	select ARCH_HAS_BANDGAP
 	select ARCH_HAS_HOLES_MEMORYMODEL
 	select ARCH_OMAP
 	select ARCH_REQUIRE_GPIOLIB
-- 
1.8.2.1.342.gfa7285d

Re: [PATCHv3 2/6] arm: introduce config HAS_BANDGAP

[Tony Lindgren]

* Eduardo Valentin <eduardo.valentin@ti.com> [130607 13:53]:
> Bandgap is a device used to measure temperature on
> electronic equipments. It is widely used in digital
> integrated circuits. It is based on the dependency
> between silicon voltage and temperature.
> 
> This patch introduce HAS_BANDGAP config entry.
> This config is a boolean value so that arch
> code can flag if they feature a bandgap device.
> 
> This config entry follows the same idea behind
> ARCH_HAS_CPUFREQ.

I suggest you add this to Russell's patch system:

Acked-by: Tony Lindgren <tony@atomide.com>
 
> Cc: Russell King <linux@arm.linux.org.uk>
> Cc: Tony Lindgren <tony@atomide.com>
> Cc: linux-arm-kernel@lists.infradead.org
> Cc: linux-omap@vger.kernel.org
> Cc: linux-kernel@vger.kernel.org
> Cc: Fabio Stevam <festevam@gmail.com>
> Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
> ---
>  arch/arm/Kconfig            | 3 +++
>  arch/arm/mach-omap2/Kconfig | 1 +
>  2 files changed, 4 insertions(+)
> 
> diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
> index d423d58..bcbdec9 100644
> --- a/arch/arm/Kconfig
> +++ b/arch/arm/Kconfig
> @@ -174,6 +174,9 @@ config ARCH_HAS_CPUFREQ
>  	  and that the relevant menu configurations are displayed for
>  	  it.
>  
> +config ARCH_HAS_BANDGAP
> +	bool
> +
>  config GENERIC_HWEIGHT
>  	bool
>  	default y
> diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
> index f49cd51..8620ab5 100644
> --- a/arch/arm/mach-omap2/Kconfig
> +++ b/arch/arm/mach-omap2/Kconfig
> @@ -4,6 +4,7 @@ config ARCH_OMAP
>  config ARCH_OMAP2PLUS
>  	bool "TI OMAP2/3/4/5 SoCs with device tree support" if (ARCH_MULTI_V6 || ARCH_MULTI_V7)
>  	select ARCH_HAS_CPUFREQ
> +	select ARCH_HAS_BANDGAP
>  	select ARCH_HAS_HOLES_MEMORYMODEL
>  	select ARCH_OMAP
>  	select ARCH_REQUIRE_GPIOLIB
> -- 
> 1.8.2.1.342.gfa7285d
> 

Re: [PATCHv3 2/6] arm: introduce config HAS_BANDGAP

[Eduardo Valentin]

[-- Attachment #1: Type: text/plain, Size: 2214 bytes --]

On 12-06-2013 13:07, Tony Lindgren wrote:
> * Eduardo Valentin <eduardo.valentin@ti.com> [130607 13:53]:
>> Bandgap is a device used to measure temperature on
>> electronic equipments. It is widely used in digital
>> integrated circuits. It is based on the dependency
>> between silicon voltage and temperature.
>>
>> This patch introduce HAS_BANDGAP config entry.
>> This config is a boolean value so that arch
>> code can flag if they feature a bandgap device.
>>
>> This config entry follows the same idea behind
>> ARCH_HAS_CPUFREQ.
> 
> I suggest you add this to Russell's patch system:
> 
> Acked-by: Tony Lindgren <tony@atomide.com>

Thanks!

I have add it to Russell's patch system and it has been accepted and
applied.

>  
>> Cc: Russell King <linux@arm.linux.org.uk>
>> Cc: Tony Lindgren <tony@atomide.com>
>> Cc: linux-arm-kernel@lists.infradead.org
>> Cc: linux-omap@vger.kernel.org
>> Cc: linux-kernel@vger.kernel.org
>> Cc: Fabio Stevam <festevam@gmail.com>
>> Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
>> ---
>>  arch/arm/Kconfig            | 3 +++
>>  arch/arm/mach-omap2/Kconfig | 1 +
>>  2 files changed, 4 insertions(+)
>>
>> diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
>> index d423d58..bcbdec9 100644
>> --- a/arch/arm/Kconfig
>> +++ b/arch/arm/Kconfig
>> @@ -174,6 +174,9 @@ config ARCH_HAS_CPUFREQ
>>  	  and that the relevant menu configurations are displayed for
>>  	  it.
>>  
>> +config ARCH_HAS_BANDGAP
>> +	bool
>> +
>>  config GENERIC_HWEIGHT
>>  	bool
>>  	default y
>> diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
>> index f49cd51..8620ab5 100644
>> --- a/arch/arm/mach-omap2/Kconfig
>> +++ b/arch/arm/mach-omap2/Kconfig
>> @@ -4,6 +4,7 @@ config ARCH_OMAP
>>  config ARCH_OMAP2PLUS
>>  	bool "TI OMAP2/3/4/5 SoCs with device tree support" if (ARCH_MULTI_V6 || ARCH_MULTI_V7)
>>  	select ARCH_HAS_CPUFREQ
>> +	select ARCH_HAS_BANDGAP
>>  	select ARCH_HAS_HOLES_MEMORYMODEL
>>  	select ARCH_OMAP
>>  	select ARCH_REQUIRE_GPIOLIB
>> -- 
>> 1.8.2.1.342.gfa7285d
>>
> 
> 


-- 
You have got to be excited about what you are doing. (L. Lamport)

Eduardo Valentin


[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 295 bytes --]

[PATCHv3 3/6] arm: dts: add bandgap entry for OMAP443x devices

[Eduardo Valentin]

This patch add the bandgap entry for OMAP4430 devices.

Cc: "Benoît Cousson" <b-cousson@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: linux-omap@vger.kernel.org
Cc: devicetree-discuss@lists.ozlabs.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
---
 arch/arm/boot/dts/omap443x.dtsi | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/arm/boot/dts/omap443x.dtsi b/arch/arm/boot/dts/omap443x.dtsi
index cccf39a..8d6c968 100644
--- a/arch/arm/boot/dts/omap443x.dtsi
+++ b/arch/arm/boot/dts/omap443x.dtsi
@@ -24,4 +24,8 @@
 			clock-latency = <300000>; /* From legacy driver */
 		};
 	};
+	bandgap {
+		reg = <0x4a002260 0x4 0x4a00232C 0x4>;
+		compatible = "ti,omap4430-bandgap";
+	};
 };
-- 
1.8.2.1.342.gfa7285d

Re: [PATCHv3 3/6] arm: dts: add bandgap entry for OMAP443x devices

[Eduardo Valentin]

[-- Attachment #1.1: Type: text/plain, Size: 1117 bytes --]

Benoit,

On 07-06-2013 16:46, Eduardo Valentin wrote:
> This patch add the bandgap entry for OMAP4430 devices.
> 
> Cc: "Benoît Cousson" <b-cousson@ti.com>
> Cc: Tony Lindgren <tony@atomide.com>
> Cc: Russell King <linux@arm.linux.org.uk>
> Cc: linux-omap@vger.kernel.org
> Cc: devicetree-discuss@lists.ozlabs.org
> Cc: linux-arm-kernel@lists.infradead.org
> Cc: linux-kernel@vger.kernel.org
> Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>

Could you please have a look on this one?

> ---
>  arch/arm/boot/dts/omap443x.dtsi | 4 ++++
>  1 file changed, 4 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/omap443x.dtsi b/arch/arm/boot/dts/omap443x.dtsi
> index cccf39a..8d6c968 100644
> --- a/arch/arm/boot/dts/omap443x.dtsi
> +++ b/arch/arm/boot/dts/omap443x.dtsi
> @@ -24,4 +24,8 @@
>  			clock-latency = <300000>; /* From legacy driver */
>  		};
>  	};
> +	bandgap {
> +		reg = <0x4a002260 0x4 0x4a00232C 0x4>;
> +		compatible = "ti,omap4430-bandgap";
> +	};
>  };
> 


-- 
You have got to be excited about what you are doing. (L. Lamport)

Eduardo Valentin


[-- Attachment #1.2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 295 bytes --]

[-- Attachment #2: Type: text/plain, Size: 176 bytes --]

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCHv3 4/6] arm: dts: add bandgap entry for OMAP4460 devices

[Eduardo Valentin]

Include bandgap devices for OMAP4460 devices.

Cc: "Benoît Cousson" <b-cousson@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: linux-omap@vger.kernel.org
Cc: devicetree-discuss@lists.ozlabs.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
---
 arch/arm/boot/dts/omap4460.dtsi | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/arch/arm/boot/dts/omap4460.dtsi b/arch/arm/boot/dts/omap4460.dtsi
index 2cf227c..ea97201 100644
--- a/arch/arm/boot/dts/omap4460.dtsi
+++ b/arch/arm/boot/dts/omap4460.dtsi
@@ -29,4 +29,13 @@
 			     <0 55 0x4>;
 		ti,hwmods = "debugss";
 	};
+
+	bandgap {
+		reg = <0x4a002260 0x4
+			0x4a00232C 0x4
+			0x4a002378 0x18>;
+		compatible = "ti,omap4460-bandgap";
+		interrupts = <0 126 4>; /* talert */
+		gpios = <&gpio3 22 0>; /* tshut */
+	};
 };
-- 
1.8.2.1.342.gfa7285d

Re: [PATCHv3 4/6] arm: dts: add bandgap entry for OMAP4460 devices

[Eduardo Valentin]

[-- Attachment #1.1: Type: text/plain, Size: 1465 bytes --]

Benoit

On 07-06-2013 16:46, Eduardo Valentin wrote:
> Include bandgap devices for OMAP4460 devices.
> 
> Cc: "Benoît Cousson" <b-cousson@ti.com>
> Cc: Tony Lindgren <tony@atomide.com>
> Cc: Russell King <linux@arm.linux.org.uk>
> Cc: linux-omap@vger.kernel.org
> Cc: devicetree-discuss@lists.ozlabs.org
> Cc: linux-arm-kernel@lists.infradead.org
> Cc: linux-kernel@vger.kernel.org
> Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
> ---

Could you please have a look on patch 3 and 4 of this series? I have
changed this one accordingly to your recommendation on v2. If nothing
else, please let me know if they can still be queued for 3.11.

I would need to rebase patch 01 to refresh on top of the thermal tree.

Thanks.

>  arch/arm/boot/dts/omap4460.dtsi | 9 +++++++++
>  1 file changed, 9 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/omap4460.dtsi b/arch/arm/boot/dts/omap4460.dtsi
> index 2cf227c..ea97201 100644
> --- a/arch/arm/boot/dts/omap4460.dtsi
> +++ b/arch/arm/boot/dts/omap4460.dtsi
> @@ -29,4 +29,13 @@
>  			     <0 55 0x4>;
>  		ti,hwmods = "debugss";
>  	};
> +
> +	bandgap {
> +		reg = <0x4a002260 0x4
> +			0x4a00232C 0x4
> +			0x4a002378 0x18>;
> +		compatible = "ti,omap4460-bandgap";
> +		interrupts = <0 126 4>; /* talert */
> +		gpios = <&gpio3 22 0>; /* tshut */
> +	};
>  };
> 


-- 
You have got to be excited about what you are doing. (L. Lamport)

Eduardo Valentin


[-- Attachment #1.2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 295 bytes --]

[-- Attachment #2: Type: text/plain, Size: 176 bytes --]

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCHv3 4/6] arm: dts: add bandgap entry for OMAP4460 devices

[Benoit Cousson]

Hi Eduardo,

On 06/18/2013 03:16 PM, Eduardo Valentin wrote:
> Benoit
>
> On 07-06-2013 16:46, Eduardo Valentin wrote:
>> Include bandgap devices for OMAP4460 devices.
>>
>> Cc: "Benoît Cousson" <b-cousson@ti.com>
>> Cc: Tony Lindgren <tony@atomide.com>
>> Cc: Russell King <linux@arm.linux.org.uk>
>> Cc: linux-omap@vger.kernel.org
>> Cc: devicetree-discuss@lists.ozlabs.org
>> Cc: linux-arm-kernel@lists.infradead.org
>> Cc: linux-kernel@vger.kernel.org
>> Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
>> ---
>
> Could you please have a look on patch 3 and 4 of this series? I have
> changed this one accordingly to your recommendation on v2. If nothing
> else, please let me know if they can still be queued for 3.11.

I've just applied both of them in my tree for 3.11. I'll send the pull 
request to Tony tomorrow.

Regards,
Benoit

>
> I would need to rebase patch 01 to refresh on top of the thermal tree.
>
> Thanks.
>
>>   arch/arm/boot/dts/omap4460.dtsi | 9 +++++++++
>>   1 file changed, 9 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/omap4460.dtsi b/arch/arm/boot/dts/omap4460.dtsi
>> index 2cf227c..ea97201 100644
>> --- a/arch/arm/boot/dts/omap4460.dtsi
>> +++ b/arch/arm/boot/dts/omap4460.dtsi
>> @@ -29,4 +29,13 @@
>>   			     <0 55 0x4>;
>>   		ti,hwmods = "debugss";
>>   	};
>> +
>> +	bandgap {
>> +		reg = <0x4a002260 0x4
>> +			0x4a00232C 0x4
>> +			0x4a002378 0x18>;
>> +		compatible = "ti,omap4460-bandgap";
>> +		interrupts = <0 126 4>; /* talert */
>> +		gpios = <&gpio3 22 0>; /* tshut */
>> +	};
>>   };
>>
>
>


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCHv3 5/6] arm: omap2plus_defconfig: enable TI bandgap driver

[Eduardo Valentin]

Enable the bandgap driver for TI SoCs thermal support.

Cc: Russell King <linux@arm.linux.org.uk>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Cc: AnilKumar Ch <anilkumar@ti.com>
Cc: Santosh Shilimkar <santosh.shilimkar@ti.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
---
 arch/arm/configs/omap2plus_defconfig | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig
index c1ef64b..6e6c494 100644
--- a/arch/arm/configs/omap2plus_defconfig
+++ b/arch/arm/configs/omap2plus_defconfig
@@ -151,6 +151,13 @@ CONFIG_W1=y
 CONFIG_POWER_SUPPLY=y
 CONFIG_SENSORS_LM75=m
 CONFIG_WATCHDOG=y
+CONFIG_THERMAL=y
+CONFIG_THERMAL_HWMON=y
+CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
+CONFIG_THERMAL_GOV_FAIR_SHARE=y
+CONFIG_THERMAL_GOV_STEP_WISE=y
+CONFIG_THERMAL_GOV_USER_SPACE=y
+CONFIG_CPU_THERMAL=y
 CONFIG_OMAP_WATCHDOG=y
 CONFIG_TWL4030_WATCHDOG=y
 CONFIG_MFD_TPS65217=y
@@ -237,6 +244,10 @@ CONFIG_RTC_DRV_TWL4030=y
 CONFIG_RTC_DRV_OMAP=y
 CONFIG_DMADEVICES=y
 CONFIG_DMA_OMAP=y
+CONFIG_TI_SOC_THERMAL=y
+CONFIG_TI_THERMAL=y
+CONFIG_OMAP4_THERMAL=y
+CONFIG_OMAP5_THERMAL=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
-- 
1.8.2.1.342.gfa7285d

Re: [PATCHv3 5/6] arm: omap2plus_defconfig: enable TI bandgap driver

[Eduardo Valentin]

[-- Attachment #1: Type: text/plain, Size: 1773 bytes --]

Tony,

On 07-06-2013 16:46, Eduardo Valentin wrote:
> Enable the bandgap driver for TI SoCs thermal support.
> 
> Cc: Russell King <linux@arm.linux.org.uk>
> Cc: Tony Lindgren <tony@atomide.com>
> Cc: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
> Cc: AnilKumar Ch <anilkumar@ti.com>
> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com>
> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
> Cc: linux-arm-kernel@lists.infradead.org
> Cc: linux-kernel@vger.kernel.org
> Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>

Is it possible for you to queue this one and patch 6 for 3.11?

Cheers,

> ---
>  arch/arm/configs/omap2plus_defconfig | 11 +++++++++++
>  1 file changed, 11 insertions(+)
> 
> diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig
> index c1ef64b..6e6c494 100644
> --- a/arch/arm/configs/omap2plus_defconfig
> +++ b/arch/arm/configs/omap2plus_defconfig
> @@ -151,6 +151,13 @@ CONFIG_W1=y
>  CONFIG_POWER_SUPPLY=y
>  CONFIG_SENSORS_LM75=m
>  CONFIG_WATCHDOG=y
> +CONFIG_THERMAL=y
> +CONFIG_THERMAL_HWMON=y
> +CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
> +CONFIG_THERMAL_GOV_FAIR_SHARE=y
> +CONFIG_THERMAL_GOV_STEP_WISE=y
> +CONFIG_THERMAL_GOV_USER_SPACE=y
> +CONFIG_CPU_THERMAL=y
>  CONFIG_OMAP_WATCHDOG=y
>  CONFIG_TWL4030_WATCHDOG=y
>  CONFIG_MFD_TPS65217=y
> @@ -237,6 +244,10 @@ CONFIG_RTC_DRV_TWL4030=y
>  CONFIG_RTC_DRV_OMAP=y
>  CONFIG_DMADEVICES=y
>  CONFIG_DMA_OMAP=y
> +CONFIG_TI_SOC_THERMAL=y
> +CONFIG_TI_THERMAL=y
> +CONFIG_OMAP4_THERMAL=y
> +CONFIG_OMAP5_THERMAL=y
>  CONFIG_EXT2_FS=y
>  CONFIG_EXT3_FS=y
>  # CONFIG_EXT3_FS_XATTR is not set
> 


-- 
You have got to be excited about what you are doing. (L. Lamport)

Eduardo Valentin


[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 295 bytes --]

Re: [PATCHv3 5/6] arm: omap2plus_defconfig: enable TI bandgap driver

[Eduardo Valentin]

[-- Attachment #1: Type: text/plain, Size: 1916 bytes --]

Tony,

On 18-06-2013 16:27, Eduardo Valentin wrote:
> Tony,
> 
> On 07-06-2013 16:46, Eduardo Valentin wrote:
>> Enable the bandgap driver for TI SoCs thermal support.
>>
>> Cc: Russell King <linux@arm.linux.org.uk>
>> Cc: Tony Lindgren <tony@atomide.com>
>> Cc: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
>> Cc: AnilKumar Ch <anilkumar@ti.com>
>> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com>
>> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
>> Cc: linux-arm-kernel@lists.infradead.org
>> Cc: linux-kernel@vger.kernel.org
>> Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
> 
> Is it possible for you to queue this one and patch 6 for 3.11?

Gentle reminder.

> 
> Cheers,
> 
>> ---
>>  arch/arm/configs/omap2plus_defconfig | 11 +++++++++++
>>  1 file changed, 11 insertions(+)
>>
>> diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig
>> index c1ef64b..6e6c494 100644
>> --- a/arch/arm/configs/omap2plus_defconfig
>> +++ b/arch/arm/configs/omap2plus_defconfig
>> @@ -151,6 +151,13 @@ CONFIG_W1=y
>>  CONFIG_POWER_SUPPLY=y
>>  CONFIG_SENSORS_LM75=m
>>  CONFIG_WATCHDOG=y
>> +CONFIG_THERMAL=y
>> +CONFIG_THERMAL_HWMON=y
>> +CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
>> +CONFIG_THERMAL_GOV_FAIR_SHARE=y
>> +CONFIG_THERMAL_GOV_STEP_WISE=y
>> +CONFIG_THERMAL_GOV_USER_SPACE=y
>> +CONFIG_CPU_THERMAL=y
>>  CONFIG_OMAP_WATCHDOG=y
>>  CONFIG_TWL4030_WATCHDOG=y
>>  CONFIG_MFD_TPS65217=y
>> @@ -237,6 +244,10 @@ CONFIG_RTC_DRV_TWL4030=y
>>  CONFIG_RTC_DRV_OMAP=y
>>  CONFIG_DMADEVICES=y
>>  CONFIG_DMA_OMAP=y
>> +CONFIG_TI_SOC_THERMAL=y
>> +CONFIG_TI_THERMAL=y
>> +CONFIG_OMAP4_THERMAL=y
>> +CONFIG_OMAP5_THERMAL=y
>>  CONFIG_EXT2_FS=y
>>  CONFIG_EXT3_FS=y
>>  # CONFIG_EXT3_FS_XATTR is not set
>>
> 
> 


-- 
You have got to be excited about what you are doing. (L. Lamport)

Eduardo Valentin


[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 295 bytes --]

Re: [PATCHv3 5/6] arm: omap2plus_defconfig: enable TI bandgap driver

[Tony Lindgren]

* Eduardo Valentin <eduardo.valentin@ti.com> [130618 13:33]:
> Tony,
> 
> On 07-06-2013 16:46, Eduardo Valentin wrote:
> > Enable the bandgap driver for TI SoCs thermal support.
> > 
> > Cc: Russell King <linux@arm.linux.org.uk>
> > Cc: Tony Lindgren <tony@atomide.com>
> > Cc: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
> > Cc: AnilKumar Ch <anilkumar@ti.com>
> > Cc: Santosh Shilimkar <santosh.shilimkar@ti.com>
> > Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
> > Cc: linux-arm-kernel@lists.infradead.org
> > Cc: linux-kernel@vger.kernel.org
> > Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
> 
> Is it possible for you to queue this one and patch 6 for 3.11?

Yes thanks applying into omap-for-v3.11/fixes.

Tony

[PATCHv3 6/6] arm: omap2plus_defconfig: enable DRA752 thermal support by default

[Eduardo Valentin]

Make DRA752 thermal support enabled on omap2plus_defconfig

Cc: Russell King <linux@arm.linux.org.uk>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Cc: AnilKumar Ch <anilkumar@ti.com>
Cc: Santosh Shilimkar <santosh.shilimkar@ti.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
---
 arch/arm/configs/omap2plus_defconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig
index 6e6c494..07aab0b 100644
--- a/arch/arm/configs/omap2plus_defconfig
+++ b/arch/arm/configs/omap2plus_defconfig
@@ -248,6 +248,7 @@ CONFIG_TI_SOC_THERMAL=y
 CONFIG_TI_THERMAL=y
 CONFIG_OMAP4_THERMAL=y
 CONFIG_OMAP5_THERMAL=y
+CONFIG_DRA752_THERMAL=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
-- 
1.8.2.1.342.gfa7285d