linux-pm.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
To: Hector Martin <marcan@marcan.st>,
	"Rafael J. Wysocki" <rafael@kernel.org>,
	Viresh Kumar <viresh.kumar@linaro.org>,
	Matthias Brugger <matthias.bgg@gmail.com>
Cc: Sven Peter <sven@svenpeter.dev>,
	Alyssa Rosenzweig <alyssa@rosenzweig.io>,
	Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Stephen Boyd <sboyd@kernel.org>,
	Ulf Hansson <ulf.hansson@linaro.org>,
	Marc Zyngier <maz@kernel.org>,
	Mark Kettenis <mark.kettenis@xs4all.nl>,
	asahi@lists.linux.dev, linux-arm-kernel@lists.infradead.org,
	linux-pm@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH v3 2/5] dt-bindings: cpufreq: apple,soc-cpufreq: Add binding for Apple SoC cpufreq
Date: Tue, 25 Oct 2022 12:01:42 -0400	[thread overview]
Message-ID: <5c3126fb-8fdb-5163-95a8-136a4a7ee2ce@linaro.org> (raw)
In-Reply-To: <20221024043925.25379-3-marcan@marcan.st>

On 24/10/2022 00:39, Hector Martin wrote:
> This binding represents the cpufreq/DVFS hardware present in Apple SoCs.
> The hardware has an independent controller per CPU cluster, and we
> represent them as unique nodes in order to accurately describe the
> hardware. The driver is responsible for binding them as a single cpufreq
> device (in the Linux cpufreq model).
> 
> Signed-off-by: Hector Martin <marcan@marcan.st>
> ---
>  .../cpufreq/apple,cluster-cpufreq.yaml        | 119 ++++++++++++++++++
>  1 file changed, 119 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/cpufreq/apple,cluster-cpufreq.yaml
> 
> diff --git a/Documentation/devicetree/bindings/cpufreq/apple,cluster-cpufreq.yaml b/Documentation/devicetree/bindings/cpufreq/apple,cluster-cpufreq.yaml
> new file mode 100644
> index 000000000000..b11452f91468
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/cpufreq/apple,cluster-cpufreq.yaml
> @@ -0,0 +1,119 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/cpufreq/apple,cluster-cpufreq.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Apple SoC cluster cpufreq device

Few nits, in general looks fine to me.

> +
> +maintainers:
> +  - Hector Martin <marcan@marcan.st>
> +
> +description: |
> +  Apple SoCs (e.g. M1) have a per-cpu-cluster DVFS controller that is part of
> +  the cluster management register block. This binding uses the standard
> +  operating-points-v2 table to define the CPU performance states, with the
> +  opp-level property specifying the hardware p-state index for that level.
> +
> +properties:
> +  compatible:
> +    oneOf:
> +      - items:
> +          - const: apple,t8103-cluster-cpufreq
> +          - const: apple,cluster-cpufreq
> +      - items:
> +          - const: apple,t6000-cluster-cpufreq
> +          - const: apple,t8103-cluster-cpufreq
> +          - const: apple,cluster-cpufreq
> +      - items:
> +          - const: apple,t8112-cluster-cpufreq

With the first one (t8103) - it's an enum.

> +          - const: apple,cluster-cpufreq
> +
> +  reg:
> +    maxItems: 1
> +    description: The register region for this CPU cluster DVFS controller

Drop description, quite obvious.

> +
> +  '#performance-domain-cells':
> +    const: 0
> +
> +required:
> +  - compatible
> +  - reg
> +  - '#performance-domain-cells'
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    // This example shows a single CPU per domain and 2 domains,
> +    // with two p-states per domain.
> +    // Shipping hardware has 2-4 CPUs per domain and 2-6 domains.
> +    cpus {
> +      #address-cells = <2>;
> +      #size-cells = <0>;
> +
> +      cpu@0 {
> +        compatible = "apple,icestorm";
> +        device_type = "cpu";
> +        reg = <0x0 0x0>;
> +        operating-points-v2 = <&ecluster_opp>;
> +        performance-domains = <&cpufreq_e>;
> +      };
> +
> +      cpu@10100 {
> +        compatible = "apple,firestorm";
> +        device_type = "cpu";
> +        reg = <0x0 0x10100>;
> +        operating-points-v2 = <&pcluster_opp>;
> +        performance-domains = <&cpufreq_p>;
> +      };
> +    };
> +
> +    ecluster_opp: opp-table-0 {
> +      compatible = "operating-points-v2";
> +      opp-shared;
> +
> +      opp01 {
> +        opp-hz = /bits/ 64 <600000000>;
> +        opp-level = <1>;
> +        clock-latency-ns = <7500>;
> +      };
> +      opp02 {
> +        opp-hz = /bits/ 64 <972000000>;
> +        opp-level = <2>;
> +        clock-latency-ns = <22000>;
> +      };
> +    };
> +
> +    pcluster_opp: opp-table-1 {
> +      compatible = "operating-points-v2";
> +      opp-shared;
> +
> +      opp01 {
> +        opp-hz = /bits/ 64 <600000000>;
> +        opp-level = <1>;
> +        clock-latency-ns = <8000>;
> +      };
> +      opp02 {
> +        opp-hz = /bits/ 64 <828000000>;
> +        opp-level = <2>;
> +        clock-latency-ns = <19000>;
> +      };
> +    };
> +
> +    soc {
> +      #address-cells = <2>;
> +      #size-cells = <2>;
> +
> +      cpufreq_e: cpufreq@210e20000 {

Node name: performance-controller

(cpufreq is rather Linux naming)

> +        compatible = "apple,t8103-cluster-cpufreq", "apple,cluster-cpufreq";
> +        reg = <0x2 0x10e20000 0 0x1000>;
> +        #performance-domain-cells = <0>;
> +      };
> +
> +      cpufreq_p: cpufreq@211e20000 {

The same.

> +        compatible = "apple,t8103-cluster-cpufreq", "apple,cluster-cpufreq";
> +        reg = <0x2 0x11e20000 0 0x1000>;
> +        #performance-domain-cells = <0>;
> +      };
> +    };

Best regards,
Krzysztof


  reply	other threads:[~2022-10-25 16:01 UTC|newest]

Thread overview: 29+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-10-24  4:39 [PATCH v3 0/5] Apple SoC cpufreq driver Hector Martin
2022-10-24  4:39 ` [PATCH v3 1/5] MAINTAINERS: Add entries for " Hector Martin
2022-10-24  4:39 ` [PATCH v3 2/5] dt-bindings: cpufreq: apple,soc-cpufreq: Add binding for Apple SoC cpufreq Hector Martin
2022-10-25 16:01   ` Krzysztof Kozlowski [this message]
2022-10-25 17:22     ` Hector Martin
2022-10-25 18:56       ` Krzysztof Kozlowski
2022-10-26  4:18         ` Hector Martin
2022-10-26 14:13           ` Krzysztof Kozlowski
2022-10-25 23:12       ` Rob Herring
2022-10-26  4:26         ` Hector Martin
2022-10-24  4:39 ` [PATCH v3 3/5] cpufreq: Generalize of_perf_domain_get_sharing_cpumask phandle format Hector Martin
2022-11-02  5:37   ` Viresh Kumar
2022-10-24  4:39 ` [PATCH v3 4/5] cpufreq: apple-soc: Add new driver to control Apple SoC CPU P-states Hector Martin
2022-10-24  8:27   ` Marc Zyngier
2022-11-09 12:13     ` Hector Martin
2022-11-09 14:20       ` Marc Zyngier
2022-11-09 15:39         ` Hector Martin
2022-11-01 15:16   ` Ulf Hansson
2022-11-01 18:17     ` Hector Martin
2022-11-14 19:49       ` Ulf Hansson
2022-11-02  6:18   ` Viresh Kumar
2022-11-09 12:36     ` Hector Martin
2022-11-14  6:51       ` Viresh Kumar
2022-11-14  6:57         ` Hector Martin
2022-11-14  7:03           ` Viresh Kumar
2022-11-14 11:06             ` Hector Martin
2022-10-24  4:39 ` [PATCH v3 5/5] arm64: dts: apple: Add CPU topology & cpufreq nodes for t8103 Hector Martin
2022-10-25 16:02   ` Krzysztof Kozlowski
2022-10-24  8:28 ` [PATCH v3 0/5] Apple SoC cpufreq driver Marc Zyngier

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=5c3126fb-8fdb-5163-95a8-136a4a7ee2ce@linaro.org \
    --to=krzysztof.kozlowski@linaro.org \
    --cc=alyssa@rosenzweig.io \
    --cc=asahi@lists.linux.dev \
    --cc=devicetree@vger.kernel.org \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=marcan@marcan.st \
    --cc=mark.kettenis@xs4all.nl \
    --cc=matthias.bgg@gmail.com \
    --cc=maz@kernel.org \
    --cc=rafael@kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=sboyd@kernel.org \
    --cc=sven@svenpeter.dev \
    --cc=ulf.hansson@linaro.org \
    --cc=viresh.kumar@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).