linux-pm.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Leonard Crestez <leonard.crestez@nxp.com>
To: Stephen Boyd <sboyd@kernel.org>,
	MyungJoo Ham <myungjoo.ham@samsung.com>,
	Kyungmin Park <kyungmin.park@samsung.com>,
	Rob Herring <robh+dt@kernel.org>
Cc: "Shawn Guo" <shawnguo@kernel.org>,
	"Michael Turquette" <mturquette@baylibre.com>,
	"Chanwoo Choi" <cw00.choi@samsung.com>,
	"Artur Świgoń" <a.swigon@partner.samsung.com>,
	"Saravana Kannan" <saravanak@google.com>,
	"Krzysztof Kozlowski" <krzk@kernel.org>,
	"Alexandre Bailon" <abailon@baylibre.com>,
	"Georgi Djakov" <georgi.djakov@linaro.org>,
	"Dong Aisheng" <aisheng.dong@nxp.com>,
	"Abel Vesa" <abel.vesa@nxp.com>, "Jacky Bai" <ping.bai@nxp.com>,
	"Anson Huang" <Anson.Huang@nxp.com>,
	"Fabio Estevam" <fabio.estevam@nxp.com>,
	"Viresh Kumar" <viresh.kumar@linaro.org>,
	"Will Deacon" <will@kernel.org>,
	"Mark Rutland" <mark.rutland@arm.com>,
	devicetree@vger.kernel.org, linux-pm@vger.kernel.org,
	linux-imx@nxp.com, kernel@pengutronix.de,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH 6/7] PM / devfreq: imx-ddrc: Measure bandwidth with perf
Date: Mon, 12 Aug 2019 21:49:50 +0300	[thread overview]
Message-ID: <6d8762453bf6020b8f1ec8c06bb5713a3d3d635e.1565633880.git.leonard.crestez@nxp.com> (raw)
In-Reply-To: <cover.1565633880.git.leonard.crestez@nxp.com>
In-Reply-To: <cover.1565633880.git.leonard.crestez@nxp.com>

The imx8m ddrc has a performance monitoring block attached which can
be used to measure bandwidth usage and automatically adjust frequency.

There is already a perf driver for that block so instead of implementing
a devfreq events driver use the in-kernel perf API to implement
get_dev_status directly.

Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
---
 drivers/devfreq/imx-ddrc.c | 136 ++++++++++++++++++++++++++++++++++++-
 1 file changed, 134 insertions(+), 2 deletions(-)

diff --git a/drivers/devfreq/imx-ddrc.c b/drivers/devfreq/imx-ddrc.c
index e46a1e711bc6..d7f27cdce697 100644
--- a/drivers/devfreq/imx-ddrc.c
+++ b/drivers/devfreq/imx-ddrc.c
@@ -11,10 +11,13 @@
 #include <linux/pm_opp.h>
 #include <linux/clk.h>
 #include <linux/clk-provider.h>
 #include <linux/arm-smccc.h>
 
+#include <asm/perf_event.h>
+#include <linux/perf_event.h>
+
 #define IMX_SIP_DDR_DVFS			0xc2000004
 
 /* Values starting from 0 switch to specific frequency */
 #define IMX_SIP_DDR_FREQ_SET_HIGH		0x00
 
@@ -81,10 +84,22 @@ struct imx_ddrc {
 	struct clk *dram_alt;
 	struct clk *dram_apb;
 
 	int freq_count;
 	struct imx_ddrc_freq freq_table[IMX_DDRC_MAX_FREQ_COUNT];
+
+	/* For measuring load with perf events: */
+	struct platform_device* pmu_pdev;
+	struct pmu *pmu;
+
+	struct perf_event_attr rd_event_attr;
+	struct perf_event_attr wr_event_attr;
+	struct perf_event *rd_event;
+	struct perf_event *wr_event;
+
+	u64 last_rd_val, last_rd_ena, last_rd_run;
+	u64 last_wr_val, last_wr_ena, last_wr_run;
 };
 
 static struct imx_ddrc_freq* imx_ddrc_find_freq(struct imx_ddrc* priv,
 						unsigned long rate)
 {
@@ -233,17 +248,117 @@ static int imx_ddrc_get_cur_freq(struct device *dev, unsigned long *freq)
 static int imx_ddrc_get_dev_status(struct device *dev,
 		struct devfreq_dev_status *stat)
 {
 	struct imx_ddrc *priv = dev_get_drvdata(dev);
 
-	stat->busy_time = 0;
-	stat->total_time = 0;
 	stat->current_frequency = clk_get_rate(priv->dram_core);
 
+	if (priv->rd_event && priv->wr_event) {
+		u64 rd_delta, rd_val, rd_ena, rd_run;
+		u64 wr_delta, wr_val, wr_ena, wr_run;
+
+		rd_val = perf_event_read_value(priv->rd_event, &rd_ena, &rd_run);
+		wr_val = perf_event_read_value(priv->wr_event, &wr_ena, &wr_run);
+
+		rd_delta = (rd_val - priv->last_rd_val) * (rd_ena - priv->last_rd_ena) / (rd_run - priv->last_rd_run);
+		priv->last_rd_val = rd_val;
+		priv->last_rd_ena = rd_ena;
+		priv->last_rd_run = rd_run;
+		wr_delta = (wr_val - priv->last_wr_val) * (wr_ena - priv->last_wr_ena) / (wr_run - priv->last_wr_run);
+		priv->last_wr_val = wr_val;
+		priv->last_wr_ena = wr_ena;
+		priv->last_wr_run = wr_run;
+
+		/* magic numbers, possibly wrong */
+		stat->busy_time = 4 * (rd_delta + wr_delta);
+		stat->total_time = stat->current_frequency;
+	} else {
+		stat->busy_time = 0;
+		stat->total_time = 0;
+	}
+
+	return 0;
+}
+
+static int imx_ddrc_perf_disable(struct imx_ddrc *priv)
+{
+	/* release and set to NULL */
+	if (!IS_ERR_OR_NULL(priv->rd_event))
+		perf_event_release_kernel(priv->rd_event);
+	if (!IS_ERR_OR_NULL(priv->wr_event))
+		perf_event_release_kernel(priv->wr_event);
+	priv->rd_event = NULL;
+	priv->wr_event = NULL;
+
 	return 0;
 }
 
+static int imx_ddrc_perf_enable(struct imx_ddrc *priv)
+{
+	int ret;
+
+	priv->rd_event_attr.size = sizeof(priv->rd_event_attr);
+	priv->rd_event_attr.type = priv->pmu->type;
+	priv->rd_event_attr.config = 0x2a;
+
+	priv->rd_event = perf_event_create_kernel_counter(
+			&priv->rd_event_attr, 0, NULL, NULL, NULL);
+	if (IS_ERR(priv->rd_event)) {
+		ret = PTR_ERR(priv->rd_event);
+		goto err;
+	}
+
+	priv->wr_event_attr.size = sizeof(priv->wr_event_attr);
+	priv->wr_event_attr.type = priv->pmu->type;
+	priv->wr_event_attr.config = 0x2b;
+
+	priv->wr_event = perf_event_create_kernel_counter(
+			&priv->wr_event_attr, 0, NULL, NULL, NULL);
+	if (IS_ERR(priv->wr_event)) {
+		ret = PTR_ERR(priv->wr_event);
+		goto err;
+	}
+
+	return 0;
+
+err:
+	imx_ddrc_perf_disable(priv);
+	return ret;
+}
+
+static int imx_ddrc_init_events(struct device *dev,
+				   struct device_node* events_node)
+{
+	struct imx_ddrc *priv = dev_get_drvdata(dev);
+	struct device_driver *driver;
+
+	/*
+	 * We need pmu->type for perf_event_attr but there is no API for
+	 * mapping device_node to pmu. Fetch private data for imx-ddr-pmu and
+	 * cast that to a struct pmu instead.
+	 */
+	priv->pmu_pdev = of_find_device_by_node(events_node);
+	if (!priv->pmu_pdev)
+		return -EPROBE_DEFER;
+	driver = priv->pmu_pdev->dev.driver;
+	if (!driver)
+		return -EPROBE_DEFER;
+	if (strcmp(driver->name, "imx-ddr-pmu")) {
+		dev_warn(dev, "devfreq-events node %pOF has unexpected driver %s\n",
+				events_node, driver->name);
+		return -ENODEV;
+	}
+
+	priv->pmu = platform_get_drvdata(priv->pmu_pdev);
+	if (!priv->pmu)
+		return -EINVAL;
+
+	dev_info(dev, "events from pmu %s\n", priv->pmu->name);
+
+	return imx_ddrc_perf_enable(priv);
+}
+
 static int imx_ddrc_init_freq_info(struct device *dev)
 {
 	struct imx_ddrc *priv = dev_get_drvdata(dev);
 	struct arm_smccc_res res;
 	int index;
@@ -291,10 +406,13 @@ static int imx_ddrc_init_freq_info(struct device *dev)
 
 static void imx_ddrc_exit(struct device *dev)
 {
 	struct imx_ddrc *priv = dev_get_drvdata(dev);
 
+	imx_ddrc_perf_disable(priv);
+	platform_device_put(priv->pmu_pdev);
+
 	return dev_pm_opp_of_remove_table(dev);
 }
 
 static int imx_ddrc_probe(struct platform_device *pdev)
 {
@@ -342,10 +460,22 @@ static int imx_ddrc_probe(struct platform_device *pdev)
 	priv->profile.get_dev_status = imx_ddrc_get_dev_status;
 	priv->profile.exit = imx_ddrc_exit;
 	priv->profile.get_cur_freq = imx_ddrc_get_cur_freq;
 	priv->profile.initial_freq = clk_get_rate(priv->dram_core);
 
+	/* Handle devfreq-events */
+	events_node = of_parse_phandle(dev->of_node, "devfreq-events", 0);
+	if (events_node) {
+		ret = imx_ddrc_init_events(dev, events_node);
+		of_node_put(events_node);
+		if (ret) {
+			dev_warn(dev, "failed to init perf events: %d\n", ret);
+			goto err;
+		}
+		gov = DEVFREQ_GOV_SIMPLE_ONDEMAND;
+	}
+
 	priv->devfreq = devm_devfreq_add_device(dev, &priv->profile,
 						gov, NULL);
 	if (IS_ERR(priv->devfreq)) {
 		ret = PTR_ERR(priv->devfreq);
 		dev_err(dev, "failed to add devfreq device: %d\n", ret);
@@ -353,10 +483,12 @@ static int imx_ddrc_probe(struct platform_device *pdev)
 	}
 
 	return 0;
 
 err:
+	imx_ddrc_perf_disable(priv);
+	platform_device_put(priv->pmu_pdev);
 	dev_pm_opp_of_remove_table(dev);
 	return ret;
 }
 
 static const struct of_device_id imx_ddrc_of_match[] = {
-- 
2.17.1


  parent reply	other threads:[~2019-08-12 18:50 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-08-12 18:49 [PATCH 0/7] PM / devfreq: Add initial imx support Leonard Crestez
2019-08-12 18:49 ` [PATCH 1/7] clk: imx8m: Set CLK_GET_RATE_NOCACHE on dram_alt/apb Leonard Crestez
2019-08-12 18:49 ` [PATCH 2/7] dt-bindings: devfreq: Add bindings for generic imx buses Leonard Crestez
2019-08-12 19:46   ` Rob Herring
2019-08-13  1:32     ` Leonard Crestez
2019-08-13 14:06       ` Rob Herring
2019-08-13 14:59         ` Leonard Crestez
2019-08-12 18:49 ` [PATCH 3/7] PM / devfreq: Add generic imx bus driver Leonard Crestez
2019-08-12 18:49 ` [PATCH 4/7] dt-bindings: devfreq: Add bindings for imx ddr controller Leonard Crestez
2019-08-12 19:51   ` Rob Herring
2019-08-12 18:49 ` [PATCH 5/7] PM / devfreq: Add dynamic scaling " Leonard Crestez
2019-08-12 18:49 ` Leonard Crestez [this message]
2019-08-12 18:49 ` [PATCH 7/7] arm64: dts: imx8mm: Add devfreq nodes Leonard Crestez
     [not found] ` <CGME20190812185002epcas1p1c528b12d20771cf4887907fdfd716e22@epcms1p2>
2019-08-13  2:25   ` [PATCH 2/7] dt-bindings: devfreq: Add bindings for generic imx buses MyungJoo Ham
     [not found] ` <CGME20190812185005epcas3p10a9a3dbb90489534222e093c63f27900@epcms1p3>
2019-08-13  2:33   ` [PATCH 3/7] PM / devfreq: Add generic imx bus driver MyungJoo Ham
2019-08-13  3:02     ` Leonard Crestez

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=6d8762453bf6020b8f1ec8c06bb5713a3d3d635e.1565633880.git.leonard.crestez@nxp.com \
    --to=leonard.crestez@nxp.com \
    --cc=Anson.Huang@nxp.com \
    --cc=a.swigon@partner.samsung.com \
    --cc=abailon@baylibre.com \
    --cc=abel.vesa@nxp.com \
    --cc=aisheng.dong@nxp.com \
    --cc=cw00.choi@samsung.com \
    --cc=devicetree@vger.kernel.org \
    --cc=fabio.estevam@nxp.com \
    --cc=georgi.djakov@linaro.org \
    --cc=kernel@pengutronix.de \
    --cc=krzk@kernel.org \
    --cc=kyungmin.park@samsung.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-imx@nxp.com \
    --cc=linux-pm@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=mturquette@baylibre.com \
    --cc=myungjoo.ham@samsung.com \
    --cc=ping.bai@nxp.com \
    --cc=robh+dt@kernel.org \
    --cc=saravanak@google.com \
    --cc=sboyd@kernel.org \
    --cc=shawnguo@kernel.org \
    --cc=viresh.kumar@linaro.org \
    --cc=will@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).