From: Rob Herring <robh+dt@kernel.org>
To: Leonard Crestez <leonard.crestez@nxp.com>
Cc: "Stephen Boyd" <sboyd@kernel.org>,
"MyungJoo Ham" <myungjoo.ham@samsung.com>,
"Kyungmin Park" <kyungmin.park@samsung.com>,
"Shawn Guo" <shawnguo@kernel.org>,
"Michael Turquette" <mturquette@baylibre.com>,
"Chanwoo Choi" <cw00.choi@samsung.com>,
"Artur Świgoń" <a.swigon@partner.samsung.com>,
"Saravana Kannan" <saravanak@google.com>,
"Krzysztof Kozlowski" <krzk@kernel.org>,
"Alexandre Bailon" <abailon@baylibre.com>,
"Georgi Djakov" <georgi.djakov@linaro.org>,
"Dong Aisheng" <aisheng.dong@nxp.com>,
"Abel Vesa" <abel.vesa@nxp.com>, "Jacky Bai" <ping.bai@nxp.com>,
"Anson Huang" <Anson.Huang@nxp.com>,
"Fabio Estevam" <fabio.estevam@nxp.com>,
"Viresh Kumar" <viresh.kumar@linaro.org>,
"Will Deacon" <will@kernel.org>,
"Mark Rutland" <mark.rutland@arm.com>,
devicetree@vger.kernel.org,
"open list:THERMAL" <linux-pm@vger.kernel.org>,
"NXP Linux Team" <linux-imx@nxp.com>,
"Sascha Hauer" <kernel@pengutronix.de>,
"moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE"
<linux-arm-kernel@lists.infradead.org>
Subject: Re: [PATCH 2/7] dt-bindings: devfreq: Add bindings for generic imx buses
Date: Mon, 12 Aug 2019 13:46:50 -0600 [thread overview]
Message-ID: <CAL_JsqJWpQN2oTm8Q2_Gzd0GJ+YZoc9j-zh-U1s4eGhMxDEmEA@mail.gmail.com> (raw)
In-Reply-To: <97b0bff95ddb85b06ef3d2f8079faa36562a956d.1565633880.git.leonard.crestez@nxp.com>
On Mon, Aug 12, 2019 at 12:49 PM Leonard Crestez
<leonard.crestez@nxp.com> wrote:
>
> Add initial dt bindings for the interconnects inside i.MX chips.
> Multiple external IPs are involved but SOC integration means the
> software controllable interfaces are very similar.
>
> This is initially only for imx8mm but add an "fsl,imx8m-nic" fallback
> similar to exynos-bus.
>
> Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
> ---
> .../devicetree/bindings/devfreq/imx.yaml | 50 +++++++++++++++++++
> 1 file changed, 50 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/devfreq/imx.yaml
>
> diff --git a/Documentation/devicetree/bindings/devfreq/imx.yaml b/Documentation/devicetree/bindings/devfreq/imx.yaml
> new file mode 100644
> index 000000000000..0e2ee3a5205e
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/devfreq/imx.yaml
> @@ -0,0 +1,50 @@
> +# SPDX-License-Identifier: GPL-2.0
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/devfreq/imx.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Generic i.MX bus frequency device
> +
> +maintainers:
> + - Leonard Crestez <leonard.crestez@nxp.com>
> +
> +description: |
> + The i.MX SoC family has multiple buses for which clock frequency (and sometimes
> + voltage) can be adjusted.
> +
> + Some of those buses expose register areas mentioned in the memory maps as GPV
> + ("Global Programmers View") but not all. Access to this area might be denied for
> + normal world.
> +
> + The buses are based on externally licensed IPs such as ARM NIC-301 and Arteris
> + FlexNOC but DT bindings are specific to the integration of these bus
> + interconnect IPs into imx SOCs.
No need to use the interconnect binding?
> +
> +properties:
> + compatible:
> + contains:
> + enum:
> + - fsl,imx8m-noc
> + - fsl,imx8m-nic
This means any combination of these 2 strings is valid. I suspect you
want a given node to have only one of them, so drop 'contains'
> +
> + reg:
> + maxItems: 1
> + description: GPV area
> +
> + clocks:
> + maxItems: 1
> +
> +required:
> + - compatible
> + - clocks
reg?
> +
> +examples:
> + - |
> + #include <dt-bindings/clock/imx8mm-clock.h>
> + noc: noc@32700000 {
> + compatible = "fsl,imx8mm-noc", "fsl,imx8m-noc";
Doesn't match the schema. (Well, it does with 'contains', but
fsl,imx8mm-noc is not documented.)
> + reg = <0x32700000 0x100000>;
> + clocks = <&clk IMX8MM_CLK_NOC>;
> + operating-points-v2 = <&noc_opp_table>;
Not documented.
> + };
> --
> 2.17.1
>
next prev parent reply other threads:[~2019-08-12 19:47 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-12 18:49 [PATCH 0/7] PM / devfreq: Add initial imx support Leonard Crestez
2019-08-12 18:49 ` [PATCH 1/7] clk: imx8m: Set CLK_GET_RATE_NOCACHE on dram_alt/apb Leonard Crestez
2019-08-12 18:49 ` [PATCH 2/7] dt-bindings: devfreq: Add bindings for generic imx buses Leonard Crestez
2019-08-12 19:46 ` Rob Herring [this message]
2019-08-13 1:32 ` Leonard Crestez
2019-08-13 14:06 ` Rob Herring
2019-08-13 14:59 ` Leonard Crestez
2019-08-12 18:49 ` [PATCH 3/7] PM / devfreq: Add generic imx bus driver Leonard Crestez
2019-08-12 18:49 ` [PATCH 4/7] dt-bindings: devfreq: Add bindings for imx ddr controller Leonard Crestez
2019-08-12 19:51 ` Rob Herring
2019-08-12 18:49 ` [PATCH 5/7] PM / devfreq: Add dynamic scaling " Leonard Crestez
2019-08-12 18:49 ` [PATCH 6/7] PM / devfreq: imx-ddrc: Measure bandwidth with perf Leonard Crestez
2019-08-12 18:49 ` [PATCH 7/7] arm64: dts: imx8mm: Add devfreq nodes Leonard Crestez
[not found] ` <CGME20190812185002epcas1p1c528b12d20771cf4887907fdfd716e22@epcms1p2>
2019-08-13 2:25 ` [PATCH 2/7] dt-bindings: devfreq: Add bindings for generic imx buses MyungJoo Ham
[not found] ` <CGME20190812185005epcas3p10a9a3dbb90489534222e093c63f27900@epcms1p3>
2019-08-13 2:33 ` [PATCH 3/7] PM / devfreq: Add generic imx bus driver MyungJoo Ham
2019-08-13 3:02 ` Leonard Crestez
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CAL_JsqJWpQN2oTm8Q2_Gzd0GJ+YZoc9j-zh-U1s4eGhMxDEmEA@mail.gmail.com \
--to=robh+dt@kernel.org \
--cc=Anson.Huang@nxp.com \
--cc=a.swigon@partner.samsung.com \
--cc=abailon@baylibre.com \
--cc=abel.vesa@nxp.com \
--cc=aisheng.dong@nxp.com \
--cc=cw00.choi@samsung.com \
--cc=devicetree@vger.kernel.org \
--cc=fabio.estevam@nxp.com \
--cc=georgi.djakov@linaro.org \
--cc=kernel@pengutronix.de \
--cc=krzk@kernel.org \
--cc=kyungmin.park@samsung.com \
--cc=leonard.crestez@nxp.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-pm@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=mturquette@baylibre.com \
--cc=myungjoo.ham@samsung.com \
--cc=ping.bai@nxp.com \
--cc=saravanak@google.com \
--cc=sboyd@kernel.org \
--cc=shawnguo@kernel.org \
--cc=viresh.kumar@linaro.org \
--cc=will@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).