[PATCH v6 0/6] clk: provide new devm helpers for prepared and enabled clocks

[PATCH v6 0/6] clk: provide new devm helpers for prepared and enabled clocks

[Uwe Kleine-König]

Hello,

compared to v5 sent last week this series only fixes two typos in the
commit logs.

The range-diff is
1:  0f2fe65a9c9c ! 1:  38f213c5eeff rtc: at91sma9: Simplify using devm_clk_get_enabled()
    @@ Metadata
     Author: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
     
      ## Commit message ##
    -    rtc: at91sma9: Simplify using devm_clk_get_enabled()
    +    rtc: at91sam9: Simplify using devm_clk_get_enabled()
     
         devm_clk_get_enabled() returns the clk already (prepared and) enabled
         and the automatically called cleanup cares for disabling (and
2:  3f11b70e7427 ! 2:  b9cebea08a73 i2c: imx: Simplify using devm_clk_get_enableded()
    @@ Metadata
     Author: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
     
      ## Commit message ##
    -    i2c: imx: Simplify using devm_clk_get_enableded()
    +    i2c: imx: Simplify using devm_clk_get_enabled()
     
         devm_clk_get_enabled() returns the clk already (prepared and) enabled
         and the automatically called cleanup cares for disabling (and
3:  6c357913e391 = 3:  8167605ad349 spi: davinci: Simplify using devm_clk_get_enabled()
4:  71b3db526357 < -:  ------------ pwm: Clarify documentation about pwm_get_state()

Other than that the state is still unchanged: This is a series which
allows several cleanups (as can be seen from patches 2 to 6) and I
didn't get any feedback from the clock maintainers since v1 that I sent
in October.

Best regards
Uwe

Uwe Kleine-König (6):
  clk: generalize devm_clk_get() a bit
  clk: Provide new devm_clk_helpers for prepared and enabled clocks
  pwm: atmel: Simplify using devm_clk_get_prepared()
  rtc: at91sam9: Simplify using devm_clk_get_enabled()
  i2c: imx: Simplify using devm_clk_get_enabled()
  spi: davinci: Simplify using devm_clk_get_enabled()

 drivers/clk/clk-devres.c     | 96 ++++++++++++++++++++++++++++++------
 drivers/i2c/busses/i2c-imx.c | 12 +----
 drivers/pwm/pwm-atmel.c      | 15 +-----
 drivers/rtc/rtc-at91sam9.c   | 22 ++-------
 drivers/spi/spi-davinci.c    | 11 +----
 include/linux/clk.h          | 87 +++++++++++++++++++++++++++++++-
 6 files changed, 176 insertions(+), 67 deletions(-)


base-commit: a38fd8748464831584a19438cbb3082b5a2dab15
-- 
2.30.2

[PATCH v6 1/6] clk: generalize devm_clk_get() a bit

[Uwe Kleine-König]

Allow to add an exit hook to devm managed clocks. Also use
clk_get_optional() in devm_clk_get_optional instead of open coding it.
The generalisation will be used in the next commit to add some more
devm_clk helpers.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
---
 drivers/clk/clk-devres.c | 67 ++++++++++++++++++++++++++++++----------
 1 file changed, 50 insertions(+), 17 deletions(-)

diff --git a/drivers/clk/clk-devres.c b/drivers/clk/clk-devres.c
index be160764911b..91c995815b57 100644
--- a/drivers/clk/clk-devres.c
+++ b/drivers/clk/clk-devres.c
@@ -4,39 +4,72 @@
 #include <linux/export.h>
 #include <linux/gfp.h>
 
+struct devm_clk_state {
+	struct clk *clk;
+	void (*exit)(struct clk *clk);
+};
+
 static void devm_clk_release(struct device *dev, void *res)
 {
-	clk_put(*(struct clk **)res);
+	struct devm_clk_state *state = *(struct devm_clk_state **)res;
+
+	if (state->exit)
+		state->exit(state->clk);
+
+	clk_put(state->clk);
 }
 
-struct clk *devm_clk_get(struct device *dev, const char *id)
+static struct clk *__devm_clk_get(struct device *dev, const char *id,
+				  struct clk *(*get)(struct device *dev, const char *id),
+				  int (*init)(struct clk *clk),
+				  void (*exit)(struct clk *clk))
 {
-	struct clk **ptr, *clk;
+	struct devm_clk_state *state;
+	struct clk *clk;
+	int ret;
 
-	ptr = devres_alloc(devm_clk_release, sizeof(*ptr), GFP_KERNEL);
-	if (!ptr)
+	state = devres_alloc(devm_clk_release, sizeof(*state), GFP_KERNEL);
+	if (!state)
 		return ERR_PTR(-ENOMEM);
 
-	clk = clk_get(dev, id);
-	if (!IS_ERR(clk)) {
-		*ptr = clk;
-		devres_add(dev, ptr);
-	} else {
-		devres_free(ptr);
+	clk = get(dev, id);
+	if (IS_ERR(clk)) {
+		ret = PTR_ERR(clk);
+		goto err_clk_get;
 	}
 
+	if (init) {
+		ret = init(clk);
+		if (ret)
+			goto err_clk_init;
+	}
+
+	state->clk = clk;
+	state->exit = exit;
+
+	devres_add(dev, state);
+
 	return clk;
+
+err_clk_init:
+
+	clk_put(clk);
+err_clk_get:
+
+	devres_free(state);
+	return ERR_PTR(ret);
 }
-EXPORT_SYMBOL(devm_clk_get);
 
-struct clk *devm_clk_get_optional(struct device *dev, const char *id)
+struct clk *devm_clk_get(struct device *dev, const char *id)
 {
-	struct clk *clk = devm_clk_get(dev, id);
+	return __devm_clk_get(dev, id, clk_get, NULL, NULL);
 
-	if (clk == ERR_PTR(-ENOENT))
-		return NULL;
+}
+EXPORT_SYMBOL(devm_clk_get);
 
-	return clk;
+struct clk *devm_clk_get_optional(struct device *dev, const char *id)
+{
+	return __devm_clk_get(dev, id, clk_get_optional, NULL, NULL);
 }
 EXPORT_SYMBOL(devm_clk_get_optional);
 
-- 
2.30.2

[PATCH v6 2/6] clk: Provide new devm_clk_helpers for prepared and enabled clocks

[Uwe Kleine-König]

When a driver keeps a clock prepared (or enabled) during the whole
lifetime of the driver, these helpers allow to simplify the drivers.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
---
 drivers/clk/clk-devres.c | 31 ++++++++++++++
 include/linux/clk.h      | 87 +++++++++++++++++++++++++++++++++++++++-
 2 files changed, 117 insertions(+), 1 deletion(-)

diff --git a/drivers/clk/clk-devres.c b/drivers/clk/clk-devres.c
index 91c995815b57..b54f7f0f2a35 100644
--- a/drivers/clk/clk-devres.c
+++ b/drivers/clk/clk-devres.c
@@ -67,12 +67,43 @@ struct clk *devm_clk_get(struct device *dev, const char *id)
 }
 EXPORT_SYMBOL(devm_clk_get);
 
+struct clk *devm_clk_get_prepared(struct device *dev, const char *id)
+{
+	return __devm_clk_get(dev, id, clk_get, clk_prepare, clk_unprepare);
+
+}
+EXPORT_SYMBOL(devm_clk_get_prepared);
+
+struct clk *devm_clk_get_enabled(struct device *dev, const char *id)
+{
+	return __devm_clk_get(dev, id, clk_get,
+			      clk_prepare_enable, clk_disable_unprepare);
+
+}
+EXPORT_SYMBOL(devm_clk_get_enabled);
+
 struct clk *devm_clk_get_optional(struct device *dev, const char *id)
 {
 	return __devm_clk_get(dev, id, clk_get_optional, NULL, NULL);
 }
 EXPORT_SYMBOL(devm_clk_get_optional);
 
+struct clk *devm_clk_get_optional_prepared(struct device *dev, const char *id)
+{
+	return __devm_clk_get(dev, id, clk_get_optional,
+			      clk_prepare, clk_unprepare);
+
+}
+EXPORT_SYMBOL(devm_clk_get_optional_prepared);
+
+struct clk *devm_clk_get_optional_enabled(struct device *dev, const char *id)
+{
+	return __devm_clk_get(dev, id, clk_get_optional,
+			      clk_prepare_enable, clk_disable_unprepare);
+
+}
+EXPORT_SYMBOL(devm_clk_get_optional_enabled);
+
 struct clk_bulk_devres {
 	struct clk_bulk_data *clks;
 	int num_clks;
diff --git a/include/linux/clk.h b/include/linux/clk.h
index 266e8de3cb51..b3c5da388b08 100644
--- a/include/linux/clk.h
+++ b/include/linux/clk.h
@@ -449,7 +449,7 @@ int __must_check devm_clk_bulk_get_all(struct device *dev,
  * the clock producer.  (IOW, @id may be identical strings, but
  * clk_get may return different clock producers depending on @dev.)
  *
- * Drivers must assume that the clock source is not enabled.
+ * Drivers must assume that the clock source is neither prepared nor enabled.
  *
  * devm_clk_get should not be called from within interrupt context.
  *
@@ -458,6 +458,47 @@ int __must_check devm_clk_bulk_get_all(struct device *dev,
  */
 struct clk *devm_clk_get(struct device *dev, const char *id);
 
+/**
+ * devm_clk_get_prepared - devm_clk_get() + clk_prepare()
+ * @dev: device for clock "consumer"
+ * @id: clock consumer ID
+ *
+ * Returns a struct clk corresponding to the clock producer, or
+ * valid IS_ERR() condition containing errno.  The implementation
+ * uses @dev and @id to determine the clock consumer, and thereby
+ * the clock producer.  (IOW, @id may be identical strings, but
+ * clk_get may return different clock producers depending on @dev.)
+ *
+ * The returned clk (if valid) is prepared. Drivers must however assume that the
+ * clock is not enabled.
+ *
+ * devm_clk_get_prepared should not be called from within interrupt context.
+ *
+ * The clock will automatically be unprepared and freed when the
+ * device is unbound from the bus.
+ */
+struct clk *devm_clk_get_prepared(struct device *dev, const char *id);
+
+/**
+ * devm_clk_get_enabled - devm_clk_get() + clk_prepare_enable()
+ * @dev: device for clock "consumer"
+ * @id: clock consumer ID
+ *
+ * Returns a struct clk corresponding to the clock producer, or
+ * valid IS_ERR() condition containing errno.  The implementation
+ * uses @dev and @id to determine the clock consumer, and thereby
+ * the clock producer.  (IOW, @id may be identical strings, but
+ * clk_get may return different clock producers depending on @dev.)
+ *
+ * The returned clk (if valid) is prepared and enabled.
+ *
+ * devm_clk_get_prepared should not be called from within interrupt context.
+ *
+ * The clock will automatically be disabled, unprepared and freed when the
+ * device is unbound from the bus.
+ */
+struct clk *devm_clk_get_enabled(struct device *dev, const char *id);
+
 /**
  * devm_clk_get_optional - lookup and obtain a managed reference to an optional
  *			   clock producer.
@@ -469,6 +510,26 @@ struct clk *devm_clk_get(struct device *dev, const char *id);
  */
 struct clk *devm_clk_get_optional(struct device *dev, const char *id);
 
+/**
+ * devm_clk_get_optional_prepared - devm_clk_get_optional() + clk_prepare()
+ * @dev: device for clock "consumer"
+ * @id: clock consumer ID
+ *
+ * Behaves the same as devm_clk_get_prepared() except where there is no clock producer.
+ * In this case, instead of returning -ENOENT, the function returns NULL.
+ */
+struct clk *devm_clk_get_optional_prepared(struct device *dev, const char *id);
+
+/**
+ * devm_clk_get_optional_enabled - devm_clk_get_optional() + clk_prepare_enable()
+ * @dev: device for clock "consumer"
+ * @id: clock consumer ID
+ *
+ * Behaves the same as devm_clk_get_enabled() except where there is no clock producer.
+ * In this case, instead of returning -ENOENT, the function returns NULL.
+ */
+struct clk *devm_clk_get_optional_enabled(struct device *dev, const char *id);
+
 /**
  * devm_get_clk_from_child - lookup and obtain a managed reference to a
  *			     clock producer from child node.
@@ -813,12 +874,36 @@ static inline struct clk *devm_clk_get(struct device *dev, const char *id)
 	return NULL;
 }
 
+static inline struct clk *devm_clk_get_prepared(struct device *dev,
+						const char *id)
+{
+	return NULL;
+}
+
+static inline struct clk *devm_clk_get_enabled(struct device *dev,
+					       const char *id)
+{
+	return NULL;
+}
+
 static inline struct clk *devm_clk_get_optional(struct device *dev,
 						const char *id)
 {
 	return NULL;
 }
 
+static inline struct clk *devm_clk_get_optional_prepared(struct device *dev,
+							 const char *id)
+{
+	return NULL;
+}
+
+static inline struct clk *devm_clk_get_optional_enabled(struct device *dev,
+							const char *id)
+{
+	return NULL;
+}
+
 static inline int __must_check devm_clk_bulk_get(struct device *dev, int num_clks,
 						 struct clk_bulk_data *clks)
 {
-- 
2.30.2

[PATCH v6 3/6] pwm: atmel: Simplify using devm_clk_get_prepared()

[Uwe Kleine-König]

With devm_clk_get_prepared() caring to unprepare the clock the error
path and remove callback can be simplified accordingly.

Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
---
 drivers/pwm/pwm-atmel.c | 15 ++-------------
 1 file changed, 2 insertions(+), 13 deletions(-)

diff --git a/drivers/pwm/pwm-atmel.c b/drivers/pwm/pwm-atmel.c
index 5813339b597b..d65e23da2582 100644
--- a/drivers/pwm/pwm-atmel.c
+++ b/drivers/pwm/pwm-atmel.c
@@ -415,16 +415,10 @@ static int atmel_pwm_probe(struct platform_device *pdev)
 	if (IS_ERR(atmel_pwm->base))
 		return PTR_ERR(atmel_pwm->base);
 
-	atmel_pwm->clk = devm_clk_get(&pdev->dev, NULL);
+	atmel_pwm->clk = devm_clk_get_prepared(&pdev->dev, NULL);
 	if (IS_ERR(atmel_pwm->clk))
 		return PTR_ERR(atmel_pwm->clk);
 
-	ret = clk_prepare(atmel_pwm->clk);
-	if (ret) {
-		dev_err(&pdev->dev, "failed to prepare PWM clock\n");
-		return ret;
-	}
-
 	atmel_pwm->chip.dev = &pdev->dev;
 	atmel_pwm->chip.ops = &atmel_pwm_ops;
 	atmel_pwm->chip.of_xlate = of_pwm_xlate_with_flags;
@@ -435,23 +429,18 @@ static int atmel_pwm_probe(struct platform_device *pdev)
 	ret = pwmchip_add(&atmel_pwm->chip);
 	if (ret < 0) {
 		dev_err(&pdev->dev, "failed to add PWM chip %d\n", ret);
-		goto unprepare_clk;
+		return ret;
 	}
 
 	platform_set_drvdata(pdev, atmel_pwm);
 
 	return ret;
-
-unprepare_clk:
-	clk_unprepare(atmel_pwm->clk);
-	return ret;
 }
 
 static int atmel_pwm_remove(struct platform_device *pdev)
 {
 	struct atmel_pwm_chip *atmel_pwm = platform_get_drvdata(pdev);
 
-	clk_unprepare(atmel_pwm->clk);
 	mutex_destroy(&atmel_pwm->isr_lock);
 
 	return pwmchip_remove(&atmel_pwm->chip);
-- 
2.30.2