[PATCH AUTOSEL 4.14 27/41] net/mlx4_en: Change min MTU size to ETH_MIN_MTU

[PATCH AUTOSEL 4.14 27/41] net/mlx4_en: Change min MTU size to ETH_MIN_MTU

[Sasha Levin]

From: Eran Ben Elisha <eranbe@mellanox.com>

[ Upstream commit 24be19e47779d604d1492c114459dca9a92acf78 ]

NIC driver minimal MTU size shall be set to ETH_MIN_MTU, as defined in
the RFC791 and in the network stack. Remove old mlx4_en only define for
it, which was set to wrong value.

Fixes: b80f71f5816f ("ethernet/mellanox: use core min/max MTU checking")
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/mellanox/mlx4/en_netdev.c | 4 ++--
 drivers/net/ethernet/mellanox/mlx4/mlx4_en.h   | 1 -
 2 files changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c
index faa4bd21f148..0fb85d71c11b 100644
--- a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c
@@ -3505,8 +3505,8 @@ int mlx4_en_init_netdev(struct mlx4_en_dev *mdev, int port,
 		dev->gso_partial_features = NETIF_F_GSO_UDP_TUNNEL_CSUM;
 	}
 
-	/* MTU range: 46 - hw-specific max */
-	dev->min_mtu = MLX4_EN_MIN_MTU;
+	/* MTU range: 68 - hw-specific max */
+	dev->min_mtu = ETH_MIN_MTU;
 	dev->max_mtu = priv->max_mtu;
 
 	mdev->pndev[port] = dev;
diff --git a/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h b/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h
index 09f4764a3f39..bdd87438a354 100644
--- a/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h
+++ b/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h
@@ -157,7 +157,6 @@
 #define HEADER_COPY_SIZE       (128 - NET_IP_ALIGN)
 #define MLX4_LOOPBACK_TEST_PAYLOAD (HEADER_COPY_SIZE - ETH_HLEN)
 
-#define MLX4_EN_MIN_MTU		46
 /* VLAN_HLEN is added twice,to support skb vlan tagged with multiple
  * headers. (For example: ETH_P_8021Q and ETH_P_8021AD).
  */
-- 
2.19.1

[PATCH AUTOSEL 4.14 28/41] net/mlx4_en: Fix build break when CONFIG_INET is off

[Sasha Levin]

From: Saeed Mahameed <saeedm@mellanox.com>

[ Upstream commit 1b603f9e4313348608f256b564ed6e3d9e67f377 ]

MLX4_EN depends on NETDEVICES, ETHERNET and INET Kconfigs.
Make sure they are listed in MLX4_EN Kconfig dependencies.

This fixes the following build break:

drivers/net/ethernet/mellanox/mlx4/en_rx.c:582:18: warning: ‘struct iphdr’ declared inside parameter list [enabled by default]
struct iphdr *iph)
^
drivers/net/ethernet/mellanox/mlx4/en_rx.c:582:18: warning: its scope is only this definition or declaration, which is probably not what you want [enabled by default]
drivers/net/ethernet/mellanox/mlx4/en_rx.c: In function ‘get_fixed_ipv4_csum’:
drivers/net/ethernet/mellanox/mlx4/en_rx.c:586:20: error: dereferencing pointer to incomplete type
_u8 ipproto = iph->protocol;

Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/mellanox/mlx4/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/mellanox/mlx4/Kconfig b/drivers/net/ethernet/mellanox/mlx4/Kconfig
index 22b1cc012bc9..c1a39be0dbe7 100644
--- a/drivers/net/ethernet/mellanox/mlx4/Kconfig
+++ b/drivers/net/ethernet/mellanox/mlx4/Kconfig
@@ -5,7 +5,7 @@
 config MLX4_EN
 	tristate "Mellanox Technologies 1/10/40Gbit Ethernet support"
 	depends on MAY_USE_DEVLINK
-	depends on PCI
+	depends on PCI && NETDEVICES && ETHERNET && INET
 	select MLX4_CORE
 	imply PTP_1588_CLOCK
 	---help---
-- 
2.19.1

[PATCH AUTOSEL 4.14 41/41] net/mlx4_core: Correctly set PFC param if global pause is turned off.

[Sasha Levin]

From: Tarick Bedeir <tarick@google.com>

[ Upstream commit bd5122cd1e0644d8bd8dd84517c932773e999766 ]

rx_ppp and tx_ppp can be set between 0 and 255, so don't clamp to 1.

Fixes: 6e8814ceb7e8 ("net/mlx4_en: Fix mixed PFC and Global pause user control requests")
Signed-off-by: Tarick Bedeir <tarick@google.com>
Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/mellanox/mlx4/en_ethtool.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c b/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c
index 5fe56dc4cfae..5363cee88a0a 100644
--- a/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c
@@ -1070,8 +1070,8 @@ static int mlx4_en_set_pauseparam(struct net_device *dev,
 
 	tx_pause = !!(pause->tx_pause);
 	rx_pause = !!(pause->rx_pause);
-	rx_ppp = priv->prof->rx_ppp && !(tx_pause || rx_pause);
-	tx_ppp = priv->prof->tx_ppp && !(tx_pause || rx_pause);
+	rx_ppp = (tx_pause || rx_pause) ? 0 : priv->prof->rx_ppp;
+	tx_ppp = (tx_pause || rx_pause) ? 0 : priv->prof->tx_ppp;
 
 	err = mlx4_SET_PORT_general(mdev->dev, priv->port,
 				    priv->rx_skb_size + ETH_FCS_LEN,
-- 
2.19.1