[PATCH AUTOSEL 5.2 121/249] ipoib: correcly show a VF hardware address

[PATCH AUTOSEL 5.2 121/249] ipoib: correcly show a VF hardware address

[Sasha Levin]

From: Denis Kirjanov <kda@linux-powerpc.org>

[ Upstream commit 64d701c608fea362881e823b666327f5d28d7ffd ]

in the case of IPoIB with SRIOV enabled hardware
ip link show command incorrecly prints
0 instead of a VF hardware address.

Before:
11: ib1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 2044 qdisc pfifo_fast
state UP mode DEFAULT group default qlen 256
    link/infiniband
80:00:00:66:fe:80:00:00:00:00:00:00:24:8a:07:03:00:a4:3e:7c brd
00:ff:ff:ff:ff:12:40:1b:ff:ff:00:00:00:00:00:00:ff:ff:ff:ff
    vf 0 MAC 00:00:00:00:00:00, spoof checking off, link-state disable,
trust off, query_rss off
...
After:
11: ib1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 2044 qdisc pfifo_fast
state UP mode DEFAULT group default qlen 256
    link/infiniband
80:00:00:66:fe:80:00:00:00:00:00:00:24:8a:07:03:00:a4:3e:7c brd
00:ff:ff:ff:ff:12:40:1b:ff:ff:00:00:00:00:00:00:ff:ff:ff:ff
    vf 0     link/infiniband
80:00:00:66:fe:80:00:00:00:00:00:00:24:8a:07:03:00:a4:3e:7c brd
00:ff:ff:ff:ff:12:40:1b:ff:ff:00:00:00:00:00:00:ff:ff:ff:ff, spoof
checking off, link-state disable, trust off, query_rss off

v1->v2: just copy an address without modifing ifla_vf_mac
v2->v3: update the changelog

Signed-off-by: Denis Kirjanov <kda@linux-powerpc.org>
Acked-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/ulp/ipoib/ipoib_main.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/infiniband/ulp/ipoib/ipoib_main.c b/drivers/infiniband/ulp/ipoib/ipoib_main.c
index 9b5e11d3fb85..04ea7db08e87 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib_main.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_main.c
@@ -1998,6 +1998,7 @@ static int ipoib_get_vf_config(struct net_device *dev, int vf,
 		return err;
 
 	ivf->vf = vf;
+	memcpy(ivf->mac, dev->dev_addr, dev->addr_len);
 
 	return 0;
 }
-- 
2.20.1

[PATCH AUTOSEL 5.2 181/249] net/mlx5: Get vport ACL namespace by vport index

[Sasha Levin]

From: Jianbo Liu <jianbol@mellanox.com>

[ Upstream commit f53297d67800feb5fafd94abd926c889aefee690 ]

The ingress and egress ACL root namespaces are created per vport and
stored into arrays. However, the vport number is not the same as the
index. Passing the array index, instead of vport number, to get the
correct ingress and egress acl namespace.

Fixes: 9b93ab981e3b ("net/mlx5: Separate ingress/egress namespaces for each vport")
Signed-off-by: Jianbo Liu <jianbol@mellanox.com>
Reviewed-by: Oz Shlomo <ozsh@mellanox.com>
Reviewed-by: Eli Britstein <elibr@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/mellanox/mlx5/core/eswitch.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c b/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c
index 6a921e24cd5e..acab26b88261 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c
@@ -939,7 +939,7 @@ int esw_vport_enable_egress_acl(struct mlx5_eswitch *esw,
 		  vport->vport, MLX5_CAP_ESW_EGRESS_ACL(dev, log_max_ft_size));
 
 	root_ns = mlx5_get_flow_vport_acl_namespace(dev, MLX5_FLOW_NAMESPACE_ESW_EGRESS,
-						    vport->vport);
+			mlx5_eswitch_vport_num_to_index(esw, vport->vport));
 	if (!root_ns) {
 		esw_warn(dev, "Failed to get E-Switch egress flow namespace for vport (%d)\n", vport->vport);
 		return -EOPNOTSUPP;
@@ -1057,7 +1057,7 @@ int esw_vport_enable_ingress_acl(struct mlx5_eswitch *esw,
 		  vport->vport, MLX5_CAP_ESW_INGRESS_ACL(dev, log_max_ft_size));
 
 	root_ns = mlx5_get_flow_vport_acl_namespace(dev, MLX5_FLOW_NAMESPACE_ESW_INGRESS,
-						    vport->vport);
+			mlx5_eswitch_vport_num_to_index(esw, vport->vport));
 	if (!root_ns) {
 		esw_warn(dev, "Failed to get E-Switch ingress flow namespace for vport (%d)\n", vport->vport);
 		return -EOPNOTSUPP;
-- 
2.20.1

[PATCH AUTOSEL 5.2 189/249] net/mlx5e: Attach/detach XDP program safely

[Sasha Levin]

From: Maxim Mikityanskiy <maximmi@mellanox.com>

[ Upstream commit e18953240de8b46360a67090c87ee1ef8160b35d ]

When an XDP program is set, a full reopen of all channels happens in two
cases:

1. When there was no program set, and a new one is being set.

2. When there was a program set, but it's being unset.

The full reopen is necessary, because the channel parameters may change
if XDP is enabled or disabled. However, it's performed in an unsafe way:
if the new channels fail to open, the old ones are already closed, and
the interface goes down. Use the safe way to switch channels instead.
The same way is already used for other configuration changes.

Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../net/ethernet/mellanox/mlx5/core/en_main.c | 31 ++++++++++++-------
 1 file changed, 20 insertions(+), 11 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
index a8e8350b38aa..8db9fdbc03ea 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
@@ -4192,8 +4192,6 @@ static int mlx5e_xdp_set(struct net_device *netdev, struct bpf_prog *prog)
 	/* no need for full reset when exchanging programs */
 	reset = (!priv->channels.params.xdp_prog || !prog);
 
-	if (was_opened && reset)
-		mlx5e_close_locked(netdev);
 	if (was_opened && !reset) {
 		/* num_channels is invariant here, so we can take the
 		 * batched reference right upfront.
@@ -4205,20 +4203,31 @@ static int mlx5e_xdp_set(struct net_device *netdev, struct bpf_prog *prog)
 		}
 	}
 
-	/* exchange programs, extra prog reference we got from caller
-	 * as long as we don't fail from this point onwards.
-	 */
-	old_prog = xchg(&priv->channels.params.xdp_prog, prog);
+	if (was_opened && reset) {
+		struct mlx5e_channels new_channels = {};
+
+		new_channels.params = priv->channels.params;
+		new_channels.params.xdp_prog = prog;
+		mlx5e_set_rq_type(priv->mdev, &new_channels.params);
+		old_prog = priv->channels.params.xdp_prog;
+
+		err = mlx5e_safe_switch_channels(priv, &new_channels, NULL);
+		if (err)
+			goto unlock;
+	} else {
+		/* exchange programs, extra prog reference we got from caller
+		 * as long as we don't fail from this point onwards.
+		 */
+		old_prog = xchg(&priv->channels.params.xdp_prog, prog);
+	}
+
 	if (old_prog)
 		bpf_prog_put(old_prog);
 
-	if (reset) /* change RQ type according to priv->xdp_prog */
+	if (!was_opened && reset) /* change RQ type according to priv->xdp_prog */
 		mlx5e_set_rq_type(priv->mdev, &priv->channels.params);
 
-	if (was_opened && reset)
-		err = mlx5e_open_locked(netdev);
-
-	if (!test_bit(MLX5E_STATE_OPENED, &priv->state) || reset)
+	if (!was_opened || reset)
 		goto unlock;
 
 	/* exchanging programs w/o reset, we update ref counts on behalf
-- 
2.20.1