[PATCH AUTOSEL 4.14 063/371] IB/iser: Pass the correct number of entries for dma mapped SGL

[PATCH AUTOSEL 4.14 063/371] IB/iser: Pass the correct number of entries for dma mapped SGL

[Sasha Levin]

From: Israel Rukshin <israelr@mellanox.com>

[ Upstream commit 57b26497fabe1b9379b59fbc7e35e608e114df16 ]

ib_dma_map_sg() augments the SGL into a 'dma mapped SGL'. This process may
change the number of entries and the lengths of each entry.

Code that touches dma_address is iterating over the 'dma mapped SGL' and
must use dma_nents which returned from ib_dma_map_sg().

ib_sg_to_pages() and ib_map_mr_sg() are using dma_address so they must use
dma_nents.

Fixes: 39405885005a ("IB/iser: Port to new fast registration API")
Fixes: bfe066e256d5 ("IB/iser: Reuse ib_sg_to_pages")
Signed-off-by: Israel Rukshin <israelr@mellanox.com>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Acked-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/ulp/iser/iser_memory.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/infiniband/ulp/iser/iser_memory.c b/drivers/infiniband/ulp/iser/iser_memory.c
index 322209d5ff58..19883169e7b7 100644
--- a/drivers/infiniband/ulp/iser/iser_memory.c
+++ b/drivers/infiniband/ulp/iser/iser_memory.c
@@ -240,8 +240,8 @@ int iser_fast_reg_fmr(struct iscsi_iser_task *iser_task,
 	page_vec->npages = 0;
 	page_vec->fake_mr.page_size = SIZE_4K;
 	plen = ib_sg_to_pages(&page_vec->fake_mr, mem->sg,
-			      mem->size, NULL, iser_set_page);
-	if (unlikely(plen < mem->size)) {
+			      mem->dma_nents, NULL, iser_set_page);
+	if (unlikely(plen < mem->dma_nents)) {
 		iser_err("page vec too short to hold this SG\n");
 		iser_data_buf_dump(mem, device->ib_device);
 		iser_dump_page_vec(page_vec);
@@ -450,10 +450,10 @@ static int iser_fast_reg_mr(struct iscsi_iser_task *iser_task,
 
 	ib_update_fast_reg_key(mr, ib_inc_rkey(mr->rkey));
 
-	n = ib_map_mr_sg(mr, mem->sg, mem->size, NULL, SIZE_4K);
-	if (unlikely(n != mem->size)) {
+	n = ib_map_mr_sg(mr, mem->sg, mem->dma_nents, NULL, SIZE_4K);
+	if (unlikely(n != mem->dma_nents)) {
 		iser_err("failed to map sg (%d/%d)\n",
-			 n, mem->size);
+			 n, mem->dma_nents);
 		return n < 0 ? n : -EINVAL;
 	}
 
-- 
2.20.1

[PATCH AUTOSEL 4.14 068/371] net/mlx5: Take lock with IRQs disabled to avoid deadlock

[Sasha Levin]

From: Moni Shoua <monis@mellanox.com>

[ Upstream commit 33814e5d127e21f53b52e17b0722c1b57d4f4d29 ]

The lock in qp_table might be taken from process context or from
interrupt context. This may lead to a deadlock unless it is taken with
IRQs disabled.

Discovered by lockdep

================================
WARNING: inconsistent lock state
4.20.0-rc6
--------------------------------
inconsistent {HARDIRQ-ON-W} -> {IN-HARDIRQ-W}

python/12572 [HC1[1]:SC0[0]:HE0:SE1] takes:
00000000052a4df4 (&(&table->lock)->rlock#2){?.+.}, /0x50 [mlx5_core]
{HARDIRQ-ON-W} state was registered at:
  _raw_spin_lock+0x33/0x70
  mlx5_get_rsc+0x1a/0x50 [mlx5_core]
  mlx5_ib_eqe_pf_action+0x493/0x1be0 [mlx5_ib]
  process_one_work+0x90c/0x1820
  worker_thread+0x87/0xbb0
  kthread+0x320/0x3e0
  ret_from_fork+0x24/0x30
irq event stamp: 103928
hardirqs last  enabled at (103927): [] nk+0x1a/0x1c
hardirqs last disabled at (103928): [] unk+0x1a/0x1c
softirqs last  enabled at (103924): [] tcp_sendmsg+0x31/0x40
softirqs last disabled at (103922): [] 80

other info that might help us debug this:
 Possible unsafe locking scenario:

       CPU0
       ----
  lock(&(&table->lock)->rlock#2);

    lock(&(&table->lock)->rlock#2);

 *** DEADLOCK ***

Fixes: 032080ab43ac ("IB/mlx5: Lock QP during page fault handling")
Signed-off-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/mellanox/mlx5/core/qp.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/qp.c b/drivers/net/ethernet/mellanox/mlx5/core/qp.c
index 5f091c6ea049..b92d5690287b 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/qp.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/qp.c
@@ -44,14 +44,15 @@ static struct mlx5_core_rsc_common *mlx5_get_rsc(struct mlx5_core_dev *dev,
 {
 	struct mlx5_qp_table *table = &dev->priv.qp_table;
 	struct mlx5_core_rsc_common *common;
+	unsigned long flags;
 
-	spin_lock(&table->lock);
+	spin_lock_irqsave(&table->lock, flags);
 
 	common = radix_tree_lookup(&table->tree, rsn);
 	if (common)
 		atomic_inc(&common->refcount);
 
-	spin_unlock(&table->lock);
+	spin_unlock_irqrestore(&table->lock, flags);
 
 	if (!common) {
 		mlx5_core_warn(dev, "Async event for bogus resource 0x%x\n",
-- 
2.20.1

[PATCH AUTOSEL 4.14 090/371] iw_cxgb4: use tos when importing the endpoint

[Sasha Levin]

From: Steve Wise <swise@opengridcomputing.com>

[ Upstream commit cb3ba0bde881f0cb7e3945d2a266901e2bd18c92 ]

import_ep() is passed the correct tos, but doesn't use it correctly.

Fixes: ac8e4c69a021 ("cxgb4/iw_cxgb4: TOS support")
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/hw/cxgb4/cm.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/infiniband/hw/cxgb4/cm.c b/drivers/infiniband/hw/cxgb4/cm.c
index 3668cc71b47e..942403e42dd0 100644
--- a/drivers/infiniband/hw/cxgb4/cm.c
+++ b/drivers/infiniband/hw/cxgb4/cm.c
@@ -2056,7 +2056,7 @@ static int import_ep(struct c4iw_ep *ep, int iptype, __u8 *peer_ip,
 	} else {
 		pdev = get_real_dev(n->dev);
 		ep->l2t = cxgb4_l2t_get(cdev->rdev.lldi.l2t,
-					n, pdev, 0);
+					n, pdev, rt_tos2priority(tos));
 		if (!ep->l2t)
 			goto out;
 		ep->mtu = dst_mtu(dst);
-- 
2.20.1

[PATCH AUTOSEL 4.14 091/371] iw_cxgb4: use tos when finding ipv6 routes

[Sasha Levin]

From: Steve Wise <swise@opengridcomputing.com>

[ Upstream commit c8a7eb554a83214c3d8ee5cb322da8c72810d2dc ]

When IPv6 support was added, the correct tos was not passed to
cxgb_find_route6(). This potentially results in the wrong route entry.

Fixes: 830662f6f032 ("RDMA/cxgb4: Add support for active and passive open connection with IPv6 address")
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/hw/cxgb4/cm.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/infiniband/hw/cxgb4/cm.c b/drivers/infiniband/hw/cxgb4/cm.c
index 942403e42dd0..7eb1cc1b1aa0 100644
--- a/drivers/infiniband/hw/cxgb4/cm.c
+++ b/drivers/infiniband/hw/cxgb4/cm.c
@@ -2147,7 +2147,8 @@ static int c4iw_reconnect(struct c4iw_ep *ep)
 					   laddr6->sin6_addr.s6_addr,
 					   raddr6->sin6_addr.s6_addr,
 					   laddr6->sin6_port,
-					   raddr6->sin6_port, 0,
+					   raddr6->sin6_port,
+					   ep->com.cm_id->tos,
 					   raddr6->sin6_scope_id);
 		iptype = 6;
 		ra = (__u8 *)&raddr6->sin6_addr;
@@ -3298,7 +3299,7 @@ int c4iw_connect(struct iw_cm_id *cm_id, struct iw_cm_conn_param *conn_param)
 					   laddr6->sin6_addr.s6_addr,
 					   raddr6->sin6_addr.s6_addr,
 					   laddr6->sin6_port,
-					   raddr6->sin6_port, 0,
+					   raddr6->sin6_port, cm_id->tos,
 					   raddr6->sin6_scope_id);
 	}
 	if (!ep->dst) {
-- 
2.20.1

[PATCH AUTOSEL 4.14 180/371] IB/mlx5: Add missing XRC options to QP optional params mask

[Sasha Levin]

From: Jack Morgenstein <jackm@dev.mellanox.co.il>

[ Upstream commit 8f4426aa19fcdb9326ac44154a117b1a3a5ae126 ]

The QP transition optional parameters for the various transition for XRC
QPs are identical to those for RC QPs.

Many of the XRC QP transition optional parameter bits are missing from the
QP optional mask table.  These omissions caused failures when doing XRC QP
state transitions.

For example, when trying to change the response timer of an XRC receive QP
via the RTS2RTS transition, the new timer value was ignored because
MLX5_QP_OPTPAR_RNR_TIMEOUT bit was missing from the optional params mask
for XRC qps for the RTS2RTS transition.

Fix this by adding the missing XRC optional parameters for all QP
transitions to the opt_mask table.

Fixes: e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters")
Fixes: a4774e9095de ("IB/mlx5: Fix opt param mask according to firmware spec")
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/hw/mlx5/qp.c | 21 +++++++++++++++++++++
 1 file changed, 21 insertions(+)

diff --git a/drivers/infiniband/hw/mlx5/qp.c b/drivers/infiniband/hw/mlx5/qp.c
index 5a7dcb5afe6e..84c962820aa2 100644
--- a/drivers/infiniband/hw/mlx5/qp.c
+++ b/drivers/infiniband/hw/mlx5/qp.c
@@ -2357,6 +2357,11 @@ static enum mlx5_qp_optpar opt_mask[MLX5_QP_NUM_STATE][MLX5_QP_NUM_STATE][MLX5_Q
 			[MLX5_QP_ST_UD] = MLX5_QP_OPTPAR_PKEY_INDEX	|
 					  MLX5_QP_OPTPAR_Q_KEY		|
 					  MLX5_QP_OPTPAR_PRI_PORT,
+			[MLX5_QP_ST_XRC] = MLX5_QP_OPTPAR_RRE		|
+					  MLX5_QP_OPTPAR_RAE		|
+					  MLX5_QP_OPTPAR_RWE		|
+					  MLX5_QP_OPTPAR_PKEY_INDEX	|
+					  MLX5_QP_OPTPAR_PRI_PORT,
 		},
 		[MLX5_QP_STATE_RTR] = {
 			[MLX5_QP_ST_RC] = MLX5_QP_OPTPAR_ALT_ADDR_PATH  |
@@ -2390,6 +2395,12 @@ static enum mlx5_qp_optpar opt_mask[MLX5_QP_NUM_STATE][MLX5_QP_NUM_STATE][MLX5_Q
 					  MLX5_QP_OPTPAR_RWE		|
 					  MLX5_QP_OPTPAR_PM_STATE,
 			[MLX5_QP_ST_UD] = MLX5_QP_OPTPAR_Q_KEY,
+			[MLX5_QP_ST_XRC] = MLX5_QP_OPTPAR_ALT_ADDR_PATH	|
+					  MLX5_QP_OPTPAR_RRE		|
+					  MLX5_QP_OPTPAR_RAE		|
+					  MLX5_QP_OPTPAR_RWE		|
+					  MLX5_QP_OPTPAR_PM_STATE	|
+					  MLX5_QP_OPTPAR_RNR_TIMEOUT,
 		},
 	},
 	[MLX5_QP_STATE_RTS] = {
@@ -2406,6 +2417,12 @@ static enum mlx5_qp_optpar opt_mask[MLX5_QP_NUM_STATE][MLX5_QP_NUM_STATE][MLX5_Q
 			[MLX5_QP_ST_UD] = MLX5_QP_OPTPAR_Q_KEY		|
 					  MLX5_QP_OPTPAR_SRQN		|
 					  MLX5_QP_OPTPAR_CQN_RCV,
+			[MLX5_QP_ST_XRC] = MLX5_QP_OPTPAR_RRE		|
+					  MLX5_QP_OPTPAR_RAE		|
+					  MLX5_QP_OPTPAR_RWE		|
+					  MLX5_QP_OPTPAR_RNR_TIMEOUT	|
+					  MLX5_QP_OPTPAR_PM_STATE	|
+					  MLX5_QP_OPTPAR_ALT_ADDR_PATH,
 		},
 	},
 	[MLX5_QP_STATE_SQER] = {
@@ -2417,6 +2434,10 @@ static enum mlx5_qp_optpar opt_mask[MLX5_QP_NUM_STATE][MLX5_QP_NUM_STATE][MLX5_Q
 					   MLX5_QP_OPTPAR_RWE		|
 					   MLX5_QP_OPTPAR_RAE		|
 					   MLX5_QP_OPTPAR_RRE,
+			[MLX5_QP_ST_XRC]  = MLX5_QP_OPTPAR_RNR_TIMEOUT	|
+					   MLX5_QP_OPTPAR_RWE		|
+					   MLX5_QP_OPTPAR_RAE		|
+					   MLX5_QP_OPTPAR_RRE,
 		},
 	},
 };
-- 
2.20.1

[PATCH AUTOSEL 4.14 208/371] RDMA/qedr: Fix incorrect device rate.

[Sasha Levin]

From: Sagiv Ozeri <sagiv.ozeri@marvell.com>

[ Upstream commit 69054666df0a9b4e8331319f98b6b9a88bc3fcc4 ]

Use the correct enum value introduced in commit 12113a35ada6 ("IB/core:
Add HDR speed enum") Prior to this change a 50Gbps port would show 40Gbps.

This patch also cleaned up the redundant redefiniton of ib speeds for
qedr.

Fixes: 12113a35ada6 ("IB/core: Add HDR speed enum")
Signed-off-by: Sagiv Ozeri <sagiv.ozeri@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/hw/qedr/verbs.c | 25 +++++++++----------------
 1 file changed, 9 insertions(+), 16 deletions(-)

diff --git a/drivers/infiniband/hw/qedr/verbs.c b/drivers/infiniband/hw/qedr/verbs.c
index 8bfe9073da78..6ae72accae3d 100644
--- a/drivers/infiniband/hw/qedr/verbs.c
+++ b/drivers/infiniband/hw/qedr/verbs.c
@@ -178,54 +178,47 @@ int qedr_query_device(struct ib_device *ibdev,
 	return 0;
 }
 
-#define QEDR_SPEED_SDR		(1)
-#define QEDR_SPEED_DDR		(2)
-#define QEDR_SPEED_QDR		(4)
-#define QEDR_SPEED_FDR10	(8)
-#define QEDR_SPEED_FDR		(16)
-#define QEDR_SPEED_EDR		(32)
-
 static inline void get_link_speed_and_width(int speed, u8 *ib_speed,
 					    u8 *ib_width)
 {
 	switch (speed) {
 	case 1000:
-		*ib_speed = QEDR_SPEED_SDR;
+		*ib_speed = IB_SPEED_SDR;
 		*ib_width = IB_WIDTH_1X;
 		break;
 	case 10000:
-		*ib_speed = QEDR_SPEED_QDR;
+		*ib_speed = IB_SPEED_QDR;
 		*ib_width = IB_WIDTH_1X;
 		break;
 
 	case 20000:
-		*ib_speed = QEDR_SPEED_DDR;
+		*ib_speed = IB_SPEED_DDR;
 		*ib_width = IB_WIDTH_4X;
 		break;
 
 	case 25000:
-		*ib_speed = QEDR_SPEED_EDR;
+		*ib_speed = IB_SPEED_EDR;
 		*ib_width = IB_WIDTH_1X;
 		break;
 
 	case 40000:
-		*ib_speed = QEDR_SPEED_QDR;
+		*ib_speed = IB_SPEED_QDR;
 		*ib_width = IB_WIDTH_4X;
 		break;
 
 	case 50000:
-		*ib_speed = QEDR_SPEED_QDR;
-		*ib_width = IB_WIDTH_4X;
+		*ib_speed = IB_SPEED_HDR;
+		*ib_width = IB_WIDTH_1X;
 		break;
 
 	case 100000:
-		*ib_speed = QEDR_SPEED_EDR;
+		*ib_speed = IB_SPEED_EDR;
 		*ib_width = IB_WIDTH_4X;
 		break;
 
 	default:
 		/* Unsupported */
-		*ib_speed = QEDR_SPEED_SDR;
+		*ib_speed = IB_SPEED_SDR;
 		*ib_width = IB_WIDTH_1X;
 	}
 }
-- 
2.20.1

[PATCH AUTOSEL 4.14 246/371] RDMA/hns: Fixs hw access invalid dma memory error

[Sasha Levin]

From: Xi Wang <wangxi11@huawei.com>

[ Upstream commit ec5bc2cc69b4fc494e04d10fc5226f6f9cf67c56 ]

When smmu is enable, if execute the perftest command and then use 'kill
-9' to exit, follow this operation repeatedly, the kernel will have a high
probability to print the following smmu event:

  arm-smmu-v3 arm-smmu-v3.1.auto: event 0x10 received:
  arm-smmu-v3 arm-smmu-v3.1.auto:  0x00007d0000000010
  arm-smmu-v3 arm-smmu-v3.1.auto:  0x0000020900000080
  arm-smmu-v3 arm-smmu-v3.1.auto:  0x00000000f47cf000
  arm-smmu-v3 arm-smmu-v3.1.auto:  0x00000000f47cf000

This is because the hw will periodically refresh the qpc cache until the
next reset.

This patch fixed it by removing the action that release qpc memory in the
'hns_roce_qp_free' function.

Fixes: 9a4435375cd1 ("IB/hns: Add driver files for hns RoCE driver")
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/hw/hns/hns_roce_qp.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/infiniband/hw/hns/hns_roce_qp.c b/drivers/infiniband/hw/hns/hns_roce_qp.c
index 3a37d26889df..281e9987ffc8 100644
--- a/drivers/infiniband/hw/hns/hns_roce_qp.c
+++ b/drivers/infiniband/hw/hns/hns_roce_qp.c
@@ -241,7 +241,6 @@ void hns_roce_qp_free(struct hns_roce_dev *hr_dev, struct hns_roce_qp *hr_qp)
 
 	if ((hr_qp->ibqp.qp_type) != IB_QPT_GSI) {
 		hns_roce_table_put(hr_dev, &qp_table->irrl_table, hr_qp->qpn);
-		hns_roce_table_put(hr_dev, &qp_table->qp_table, hr_qp->qpn);
 	}
 }
 
-- 
2.20.1

[PATCH AUTOSEL 4.14 261/371] net/mlx5: Fix mlx5_ifc_query_lag_out_bits

[Sasha Levin]

From: Mark Zhang <markz@mellanox.com>

[ Upstream commit ea77388b02270b0af8dc57f668f311235ea068f0 ]

Remove the "reserved_at_40" field to match the device specification.

Fixes: 84df61ebc69b ("net/mlx5: Add HW interfaces used by LAG")
Signed-off-by: Mark Zhang <markz@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/linux/mlx5/mlx5_ifc.h | 2 --
 1 file changed, 2 deletions(-)

diff --git a/include/linux/mlx5/mlx5_ifc.h b/include/linux/mlx5/mlx5_ifc.h
index 1d793d86d55f..6ffa181598e6 100644
--- a/include/linux/mlx5/mlx5_ifc.h
+++ b/include/linux/mlx5/mlx5_ifc.h
@@ -8671,8 +8671,6 @@ struct mlx5_ifc_query_lag_out_bits {
 
 	u8         syndrome[0x20];
 
-	u8         reserved_at_40[0x40];
-
 	struct mlx5_ifc_lagc_bits ctx;
 };
 
-- 
2.20.1

[PATCH AUTOSEL 4.14 268/371] net/rds: Add a few missing rds_stat_names entries

[Sasha Levin]

From: Gerd Rausch <gerd.rausch@oracle.com>

[ Upstream commit 55c70ca00c982fbc0df4c4d3e31747fb73f4ddb5 ]

In a previous commit, fields were added to "struct rds_statistics"
but array "rds_stat_names" was not updated accordingly.

Please note the inconsistent naming of the string representations
that is done in the name of compatibility
with the Oracle internal code-base.

s_recv_bytes_added_to_socket     -> "recv_bytes_added_to_sock"
s_recv_bytes_removed_from_socket -> "recv_bytes_freed_fromsock"

Fixes: 192a798f5299 ("RDS: add stat for socket recv memory usage")
Signed-off-by: Gerd Rausch <gerd.rausch@oracle.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/rds/stats.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/net/rds/stats.c b/net/rds/stats.c
index 73be187d389e..6bbab4d74c4f 100644
--- a/net/rds/stats.c
+++ b/net/rds/stats.c
@@ -76,6 +76,8 @@ static const char *const rds_stat_names[] = {
 	"cong_update_received",
 	"cong_send_error",
 	"cong_send_blocked",
+	"recv_bytes_added_to_sock",
+	"recv_bytes_freed_fromsock",
 };
 
 void rds_stats_info_copy(struct rds_info_iterator *iter,
-- 
2.20.1

[PATCH AUTOSEL 4.14 300/371] RDMA/cma: Fix false error message

[Sasha Levin]

From: Håkon Bugge <haakon.bugge@oracle.com>

[ Upstream commit a6e4d254c19b541a58caced322111084b27a7788 ]

In addr_handler(), assuming status == 0 and the device already has been
acquired (id_priv->cma_dev != NULL), we get the following incorrect
"error" message:

RDMA CM: ADDR_ERROR: failed to resolve IP. status 0

Fixes: 498683c6a7ee ("IB/cma: Add debug messages to error flows")
Link: https://lore.kernel.org/r/20190902092731.1055757-1-haakon.bugge@oracle.com
Signed-off-by: Håkon Bugge <haakon.bugge@oracle.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/core/cma.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/infiniband/core/cma.c b/drivers/infiniband/core/cma.c
index fc4630e4acdd..1614f6f3677c 100644
--- a/drivers/infiniband/core/cma.c
+++ b/drivers/infiniband/core/cma.c
@@ -2789,7 +2789,7 @@ static void addr_handler(int status, struct sockaddr *src_addr,
 		if (status)
 			pr_debug_ratelimited("RDMA CM: ADDR_ERROR: failed to acquire device. status %d\n",
 					     status);
-	} else {
+	} else if (status) {
 		pr_debug_ratelimited("RDMA CM: ADDR_ERROR: failed to resolve IP. status %d\n", status);
 	}
 
-- 
2.20.1

[PATCH AUTOSEL 4.14 301/371] net/rds: Fix 'ib_evt_handler_call' element in 'rds_ib_stat_names'

[Sasha Levin]

From: Gerd Rausch <gerd.rausch@oracle.com>

[ Upstream commit 05a82481a3024b94db00b8c816bb3d526b5209e0 ]

All entries in 'rds_ib_stat_names' are stringified versions
of the corresponding "struct rds_ib_statistics" element
without the "s_"-prefix.

Fix entry 'ib_evt_handler_call' to do the same.

Fixes: f4f943c958a2 ("RDS: IB: ack more receive completions to improve performance")
Signed-off-by: Gerd Rausch <gerd.rausch@oracle.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/rds/ib_stats.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/rds/ib_stats.c b/net/rds/ib_stats.c
index 9252ad126335..ac46d8961b61 100644
--- a/net/rds/ib_stats.c
+++ b/net/rds/ib_stats.c
@@ -42,7 +42,7 @@ DEFINE_PER_CPU_SHARED_ALIGNED(struct rds_ib_statistics, rds_ib_stats);
 static const char *const rds_ib_stat_names[] = {
 	"ib_connect_raced",
 	"ib_listen_closed_stale",
-	"s_ib_evt_handler_call",
+	"ib_evt_handler_call",
 	"ib_tasklet_call",
 	"ib_tx_cq_event",
 	"ib_tx_ring_full",
-- 
2.20.1

[PATCH AUTOSEL 4.14 341/371] RDMA/mlx5: Return proper error value

[Sasha Levin]

From: Leon Romanovsky <leonro@mellanox.com>

[ Upstream commit 546d30099ed204792083f043cd7e016de86016a3 ]

Returned value from mlx5_mr_cache_alloc() is checked to be error or real
pointer. Return proper error code instead of NULL which is not checked
later.

Fixes: 81713d3788d2 ("IB/mlx5: Add implicit MR support")
Link: https://lore.kernel.org/r/20191029055721.7192-1-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/hw/mlx5/mr.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/infiniband/hw/mlx5/mr.c b/drivers/infiniband/hw/mlx5/mr.c
index cfddca850cb4..fb45bfa4f845 100644
--- a/drivers/infiniband/hw/mlx5/mr.c
+++ b/drivers/infiniband/hw/mlx5/mr.c
@@ -460,7 +460,7 @@ struct mlx5_ib_mr *mlx5_mr_cache_alloc(struct mlx5_ib_dev *dev, int entry)
 
 	if (entry < 0 || entry >= MAX_MR_CACHE_ENTRIES) {
 		mlx5_ib_err(dev, "cache entry %d is out of range\n", entry);
-		return NULL;
+		return ERR_PTR(-EINVAL);
 	}
 
 	ent = &cache->ent[entry];
-- 
2.20.1

[PATCH AUTOSEL 4.14 370/371] IB/iser: Fix dma_nents type definition

[Sasha Levin]

From: Max Gurtovoy <maxg@mellanox.com>

[ Upstream commit c1545f1a200f4adc4ef8dd534bf33e2f1aa22c2f ]

The retured value from ib_dma_map_sg saved in dma_nents variable. To avoid
future mismatch between types, define dma_nents as an integer instead of
unsigned.

Fixes: 57b26497fabe ("IB/iser: Pass the correct number of entries for dma mapped SGL")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Israel Rukshin <israelr@mellanox.com>
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Acked-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/ulp/iser/iscsi_iser.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/infiniband/ulp/iser/iscsi_iser.h b/drivers/infiniband/ulp/iser/iscsi_iser.h
index c1ae4aeae2f9..46dfc6ae9d1c 100644
--- a/drivers/infiniband/ulp/iser/iscsi_iser.h
+++ b/drivers/infiniband/ulp/iser/iscsi_iser.h
@@ -197,7 +197,7 @@ struct iser_data_buf {
 	struct scatterlist *sg;
 	int                size;
 	unsigned long      data_len;
-	unsigned int       dma_nents;
+	int                dma_nents;
 };
 
 /* fwd declarations */
-- 
2.20.1