Linux-RDMA Archive on lore.kernel.org
 help / color / Atom feed
From: Leon Romanovsky <leon@kernel.org>
To: Doug Ledford <dledford@redhat.com>, Jason Gunthorpe <jgg@mellanox.com>
Cc: Leon Romanovsky <leonro@mellanox.com>,
	linux-rdma@vger.kernel.org, Maor Gottlieb <maorg@mellanox.com>,
	Mark Zhang <markz@mellanox.com>,
	netdev@vger.kernel.org, Saeed Mahameed <saeedm@mellanox.com>
Subject: [PATCH mlx5-next v1 1/9] net/mlx5: Add ability to read and write ECE options
Date: Sat, 23 May 2020 16:22:35 +0300
Message-ID: <20200523132243.817936-2-leon@kernel.org> (raw)
In-Reply-To: <20200523132243.817936-1-leon@kernel.org>

From: Leon Romanovsky <leonro@mellanox.com>

The end result of RDMA-CM ECE handshake is ECE options, which is
needed to be used while configuring data QPs. Such options can
come in any QP state, so add in/out fields to set and query
ECE options.

OUT fields:
* create_qp()/create_dct() - default ECE options for that type of QP.
* modify_qp() - enabled ECE options after QP state transition.

IN fields:
* create_qp()/create_dct() - create QP with this ECE option.
* modify_qp() - requested options. For unconnected QPs, the FW
will return an error if ECE is already configured with any options
that not equal to previously set.

Reviewed-by: Mark Zhang <markz@mellanox.com>
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
---
 include/linux/mlx5/mlx5_ifc.h | 29 +++++++++++++++++------------
 1 file changed, 17 insertions(+), 12 deletions(-)

diff --git a/include/linux/mlx5/mlx5_ifc.h b/include/linux/mlx5/mlx5_ifc.h
index 6b22e5a96f10..5e73bc7322c4 100644
--- a/include/linux/mlx5/mlx5_ifc.h
+++ b/include/linux/mlx5/mlx5_ifc.h
@@ -1296,7 +1296,7 @@ struct mlx5_ifc_cmd_hca_cap_bits {
 	u8         port_type[0x2];
 	u8         num_ports[0x8];
 
-	u8         reserved_at_1c0[0x1];
+	u8         ece_support[0x1];
 	u8         pps[0x1];
 	u8         pps_modify[0x1];
 	u8         log_max_msg[0x5];
@@ -3690,7 +3690,8 @@ struct mlx5_ifc_dctc_bits {
 	u8         ecn[0x2];
 	u8         dscp[0x6];
 
-	u8         reserved_at_1c0[0x40];
+	u8         reserved_at_1c0[0x20];
+	u8	   ece[0x20];
 };
 
 enum {
@@ -4220,7 +4221,8 @@ struct mlx5_ifc_rts2rts_qp_out_bits {
 
 	u8         syndrome[0x20];
 
-	u8         reserved_at_40[0x40];
+	u8         reserved_at_40[0x20];
+	u8         ece[0x20];
 };
 
 struct mlx5_ifc_rts2rts_qp_in_bits {
@@ -4237,7 +4239,7 @@ struct mlx5_ifc_rts2rts_qp_in_bits {
 
 	u8         opt_param_mask[0x20];
 
-	u8         reserved_at_a0[0x20];
+	u8         ece[0x20];
 
 	struct mlx5_ifc_qpc_bits qpc;
 
@@ -4250,7 +4252,8 @@ struct mlx5_ifc_rtr2rts_qp_out_bits {
 
 	u8         syndrome[0x20];
 
-	u8         reserved_at_40[0x40];
+	u8         reserved_at_40[0x20];
+	u8         ece[0x20];
 };
 
 struct mlx5_ifc_rtr2rts_qp_in_bits {
@@ -4267,7 +4270,7 @@ struct mlx5_ifc_rtr2rts_qp_in_bits {
 
 	u8         opt_param_mask[0x20];
 
-	u8         reserved_at_a0[0x20];
+	u8         ece[0x20];
 
 	struct mlx5_ifc_qpc_bits qpc;
 
@@ -4819,7 +4822,8 @@ struct mlx5_ifc_query_qp_out_bits {
 
 	u8         syndrome[0x20];
 
-	u8         reserved_at_40[0x40];
+	u8         reserved_at_40[0x20];
+	u8         ece[0x20];
 
 	u8         opt_param_mask[0x20];
 
@@ -6584,7 +6588,8 @@ struct mlx5_ifc_init2rtr_qp_out_bits {
 
 	u8         syndrome[0x20];
 
-	u8         reserved_at_40[0x40];
+	u8         reserved_at_40[0x20];
+	u8         ece[0x20];
 };
 
 struct mlx5_ifc_init2rtr_qp_in_bits {
@@ -6601,7 +6606,7 @@ struct mlx5_ifc_init2rtr_qp_in_bits {
 
 	u8         opt_param_mask[0x20];
 
-	u8         reserved_at_a0[0x20];
+	u8         ece[0x20];
 
 	struct mlx5_ifc_qpc_bits qpc;
 
@@ -7697,7 +7702,7 @@ struct mlx5_ifc_create_qp_out_bits {
 	u8         reserved_at_40[0x8];
 	u8         qpn[0x18];
 
-	u8         reserved_at_60[0x20];
+	u8         ece[0x20];
 };
 
 struct mlx5_ifc_create_qp_in_bits {
@@ -7711,7 +7716,7 @@ struct mlx5_ifc_create_qp_in_bits {
 
 	u8         opt_param_mask[0x20];
 
-	u8         reserved_at_a0[0x20];
+	u8         ece[0x20];
 
 	struct mlx5_ifc_qpc_bits qpc;
 
@@ -7936,7 +7941,7 @@ struct mlx5_ifc_create_dct_out_bits {
 	u8         reserved_at_40[0x8];
 	u8         dctn[0x18];
 
-	u8         reserved_at_60[0x20];
+	u8         ece[0x20];
 };
 
 struct mlx5_ifc_create_dct_in_bits {
-- 
2.26.2


  reply index

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-05-23 13:22 [PATCH rdma-next v1 0/9] Driver part of the ECE Leon Romanovsky
2020-05-23 13:22 ` Leon Romanovsky [this message]
2020-05-23 13:22 ` [PATCH rdma-next v1 2/9] RDMA/mlx5: Get ECE options from FW during create QP Leon Romanovsky
2020-05-25 18:17   ` Jason Gunthorpe
2020-05-25 18:27     ` Leon Romanovsky
2020-05-23 13:22 ` [PATCH rdma-next v1 3/9] RDMA/mlx5: Set ECE options during QP create Leon Romanovsky
2020-05-23 13:22 ` [PATCH rdma-next v1 4/9] RDMA/mlx5: Use direct modify QP implementation Leon Romanovsky
2020-05-23 13:22 ` [PATCH rdma-next v1 5/9] RDMA/mlx5: Remove manually crafted QP context the query call Leon Romanovsky
2020-05-23 13:22 ` [PATCH rdma-next v1 6/9] RDMA/mlx5: Convert modify QP to use MLX5_SET macros Leon Romanovsky
2020-05-23 13:22 ` [PATCH rdma-next v1 7/9] RDMA/mlx5: Advertise ECE support Leon Romanovsky
2020-05-25 18:18   ` Jason Gunthorpe
2020-05-25 18:29     ` Leon Romanovsky
2020-05-23 13:22 ` [PATCH rdma-next v1 8/9] RDMA/mlx5: Set ECE options during modify QP Leon Romanovsky
2020-05-23 13:22 ` [PATCH rdma-next v1 9/9] RDMA/mlx5: Return ECE data after " Leon Romanovsky

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200523132243.817936-2-leon@kernel.org \
    --to=leon@kernel.org \
    --cc=dledford@redhat.com \
    --cc=jgg@mellanox.com \
    --cc=leonro@mellanox.com \
    --cc=linux-rdma@vger.kernel.org \
    --cc=maorg@mellanox.com \
    --cc=markz@mellanox.com \
    --cc=netdev@vger.kernel.org \
    --cc=saeedm@mellanox.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-RDMA Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-rdma/0 linux-rdma/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-rdma linux-rdma/ https://lore.kernel.org/linux-rdma \
		linux-rdma@vger.kernel.org
	public-inbox-index linux-rdma

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-rdma


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git