linux-rdma.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Leon Romanovsky <leon@kernel.org>
To: Doug Ledford <dledford@redhat.com>, Jason Gunthorpe <jgg@nvidia.com>
Cc: Leon Romanovsky <leonro@nvidia.com>,
	Devesh Sharma <devesh.sharma@broadcom.com>,
	linux-rdma@vger.kernel.org,
	Naresh Kumar PBS <nareshkumar.pbs@broadcom.com>,
	Selvin Xavier <selvin.xavier@broadcom.com>,
	Somnath Kotur <somnath.kotur@broadcom.com>,
	Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
Subject: [PATCH rdma-next] bnxt_re: Rely on Kconfig to keep module dependency
Date: Wed, 24 Mar 2021 16:25:24 +0200	[thread overview]
Message-ID: <20210324142524.1135319-1-leon@kernel.org> (raw)

From: Leon Romanovsky <leonro@nvidia.com>

Instead of manually messing with parent driver module reference
counting, rely on "depends on" keyword to ensure that proper
probe/remove chain is performed.

Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
---
 drivers/infiniband/hw/bnxt_re/Kconfig |  4 +---
 drivers/infiniband/hw/bnxt_re/main.c  | 20 +++++---------------
 2 files changed, 6 insertions(+), 18 deletions(-)

diff --git a/drivers/infiniband/hw/bnxt_re/Kconfig b/drivers/infiniband/hw/bnxt_re/Kconfig
index 0feac5132ce1..b4779a6cd565 100644
--- a/drivers/infiniband/hw/bnxt_re/Kconfig
+++ b/drivers/infiniband/hw/bnxt_re/Kconfig
@@ -2,9 +2,7 @@
 config INFINIBAND_BNXT_RE
 	tristate "Broadcom Netxtreme HCA support"
 	depends on 64BIT
-	depends on ETHERNET && NETDEVICES && PCI && INET && DCB
-	select NET_VENDOR_BROADCOM
-	select BNXT
+	depends on ETHERNET && NETDEVICES && PCI && INET && DCB && BNXT
 	help
 	  This driver supports Broadcom NetXtreme-E 10/25/40/50 gigabit
 	  RoCE HCAs.  To compile this driver as a module, choose M here:
diff --git a/drivers/infiniband/hw/bnxt_re/main.c b/drivers/infiniband/hw/bnxt_re/main.c
index fdb8c2478258..a81adb07e5d9 100644
--- a/drivers/infiniband/hw/bnxt_re/main.c
+++ b/drivers/infiniband/hw/bnxt_re/main.c
@@ -561,13 +561,6 @@ static struct bnxt_re_dev *bnxt_re_from_netdev(struct net_device *netdev)
 	return container_of(ibdev, struct bnxt_re_dev, ibdev);
 }
 
-static void bnxt_re_dev_unprobe(struct net_device *netdev,
-				struct bnxt_en_dev *en_dev)
-{
-	dev_put(netdev);
-	module_put(en_dev->pdev->driver->driver.owner);
-}
-
 static struct bnxt_en_dev *bnxt_re_dev_probe(struct net_device *netdev)
 {
 	struct bnxt *bp = netdev_priv(netdev);
@@ -593,10 +586,6 @@ static struct bnxt_en_dev *bnxt_re_dev_probe(struct net_device *netdev)
 		return ERR_PTR(-ENODEV);
 	}
 
-	/* Bump net device reference count */
-	if (!try_module_get(pdev->driver->driver.owner))
-		return ERR_PTR(-ENODEV);
-
 	dev_hold(netdev);
 
 	return en_dev;
@@ -1523,13 +1512,14 @@ static int bnxt_re_dev_init(struct bnxt_re_dev *rdev, u8 wqe_mode)
 
 static void bnxt_re_dev_unreg(struct bnxt_re_dev *rdev)
 {
-	struct bnxt_en_dev *en_dev = rdev->en_dev;
 	struct net_device *netdev = rdev->netdev;
 
 	bnxt_re_dev_remove(rdev);
 
-	if (netdev)
-		bnxt_re_dev_unprobe(netdev, en_dev);
+	if (!netdev)
+		return;
+
+	dev_put(netdev);
 }
 
 static int bnxt_re_dev_reg(struct bnxt_re_dev **rdev, struct net_device *netdev)
@@ -1551,7 +1541,7 @@ static int bnxt_re_dev_reg(struct bnxt_re_dev **rdev, struct net_device *netdev)
 	*rdev = bnxt_re_dev_add(netdev, en_dev);
 	if (!*rdev) {
 		rc = -ENOMEM;
-		bnxt_re_dev_unprobe(netdev, en_dev);
+		dev_put(netdev);
 		goto exit;
 	}
 exit:
-- 
2.30.2


             reply	other threads:[~2021-03-24 14:26 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-03-24 14:25 Leon Romanovsky [this message]
2021-03-24 15:07 ` [PATCH rdma-next] bnxt_re: Rely on Kconfig to keep module dependency Jason Gunthorpe
2021-03-24 15:16   ` Leon Romanovsky
2021-03-24 16:30     ` Devesh Sharma
2021-03-24 16:56       ` Jason Gunthorpe
2021-03-24 17:24         ` Devesh Sharma
2021-03-24 17:35           ` Jason Gunthorpe
2021-03-25  8:40             ` Leon Romanovsky
2021-03-26  6:09               ` Devesh Sharma

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210324142524.1135319-1-leon@kernel.org \
    --to=leon@kernel.org \
    --cc=devesh.sharma@broadcom.com \
    --cc=dledford@redhat.com \
    --cc=jgg@nvidia.com \
    --cc=leonro@nvidia.com \
    --cc=linux-rdma@vger.kernel.org \
    --cc=nareshkumar.pbs@broadcom.com \
    --cc=selvin.xavier@broadcom.com \
    --cc=somnath.kotur@broadcom.com \
    --cc=sriharsha.basavapatna@broadcom.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).