From: Alok Prasad <palok@marvell.com>
To: <jgg@ziepe.ca>, <dledford@redhat.com>
Cc: <michal.kalderon@marvell.com>, <ariel.elior@marvell.com>,
<linux-rdma@vger.kernel.org>, <smalin@marvell.com>,
<aelior@marvell.com>, <palok@marvell.com>,
<alok.prasad7@gmail.com>, Michal Kalderon <mkalderon@marvell.com>
Subject: [v2,for-rc] RDMA/qedr: qedr crash while running rdma-tool
Date: Sat, 23 Oct 2021 16:45:57 +0000 [thread overview]
Message-ID: <20211023164557.7921-1-palok@marvell.com> (raw)
This patch fixes crash caused by querying qp.
Also corrects the state of gsi qp.
Below call trace is generated while using iproute2 utility
"rdma res show -dd qp" on rdma interface.
==========================================================================
[ 302.569794] BUG: kernel NULL pointer dereference, address: 0000000000000034
..
[ 302.570378] Hardware name: Dell Inc. PowerEdge R720/0M1GCR, BIOS 1.2.6 05/10/2012
[ 302.570500] RIP: 0010:qed_rdma_query_qp+0x33/0x1a0 [qed]
[ 302.570861] RSP: 0018:ffffba560a08f580 EFLAGS: 00010206
[ 302.570979] RAX: 0000000200000000 RBX: ffffba560a08f5b8 RCX: 0000000000000000
[ 302.571100] RDX: ffffba560a08f5b8 RSI: 0000000000000000 RDI: ffff9807ee458090
[ 302.571221] RBP: ffffba560a08f5a0 R08: 0000000000000000 R09: ffff9807890e7048
[ 302.571342] R10: ffffba560a08f658 R11: 0000000000000000 R12: 0000000000000000
[ 302.571462] R13: ffff9807ee458090 R14: ffff9807f0afb000 R15: ffffba560a08f7ec
[ 302.571583] FS: 00007fbbf8bfe740(0000) GS:ffff980aafa00000(0000) knlGS:0000000000000000
[ 302.571729] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 302.571847] CR2: 0000000000000034 CR3: 00000001720ba001 CR4: 00000000000606f0
[ 302.571968] Call Trace:
[ 302.572083] qedr_query_qp+0x82/0x360 [qedr]
[ 302.572211] ib_query_qp+0x34/0x40 [ib_core]
[ 302.572361] ? ib_query_qp+0x34/0x40 [ib_core]
[ 302.572503] fill_res_qp_entry_query.isra.26+0x47/0x1d0 [ib_core]
[ 302.572670] ? __nla_put+0x20/0x30
[ 302.572788] ? nla_put+0x33/0x40
[ 302.572901] fill_res_qp_entry+0xe3/0x120 [ib_core]
[ 302.573058] res_get_common_dumpit+0x3f8/0x5d0 [ib_core]
[ 302.573213] ? fill_res_cm_id_entry+0x1f0/0x1f0 [ib_core]
[ 302.573377] nldev_res_get_qp_dumpit+0x1a/0x20 [ib_core]
[ 302.573529] netlink_dump+0x156/0x2f0
[ 302.573648] __netlink_dump_start+0x1ab/0x260
[ 302.573765] rdma_nl_rcv+0x1de/0x330 [ib_core]
[ 302.573918] ? nldev_res_get_cm_id_dumpit+0x20/0x20 [ib_core]
[ 302.574074] netlink_unicast+0x1b8/0x270
[ 302.574191] netlink_sendmsg+0x33e/0x470
[ 302.574307] sock_sendmsg+0x63/0x70
[ 302.574421] __sys_sendto+0x13f/0x180
[ 302.574536] ? setup_sgl.isra.12+0x70/0xc0
[ 302.574655] __x64_sys_sendto+0x28/0x30
[ 302.574769] do_syscall_64+0x3a/0xb0
[ 302.574884] entry_SYSCALL_64_after_hwframe+0x44/0xae
==========================================================================
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: Michal Kalderon <mkalderon@marvell.com>
Signed-off-by: Shai Malin <smalin@marvell.com>
Signed-off-by: Alok Prasad <palok@marvell.com>
---
v2 (from [1]):
- Change description.
- Corrected enum type.
[1] https://patchwork.kernel.org/project/linux-rdma/patch/20210821074339.16614-1-palok@marvell.com/
---
drivers/infiniband/hw/qedr/verbs.c | 13 +++++++++----
1 file changed, 9 insertions(+), 4 deletions(-)
diff --git a/drivers/infiniband/hw/qedr/verbs.c b/drivers/infiniband/hw/qedr/verbs.c
index dcb3653db72d..85baa4f730df 100644
--- a/drivers/infiniband/hw/qedr/verbs.c
+++ b/drivers/infiniband/hw/qedr/verbs.c
@@ -2744,15 +2744,20 @@ int qedr_query_qp(struct ib_qp *ibqp,
int rc = 0;
memset(¶ms, 0, sizeof(params));
+ memset(qp_attr, 0, sizeof(*qp_attr));
+ memset(qp_init_attr, 0, sizeof(*qp_init_attr));
- rc = dev->ops->rdma_query_qp(dev->rdma_ctx, qp->qed_qp, ¶ms);
+ if (qp->qed_qp)
+ rc = dev->ops->rdma_query_qp(dev->rdma_ctx,
+ qp->qed_qp, ¶ms);
if (rc)
goto err;
- memset(qp_attr, 0, sizeof(*qp_attr));
- memset(qp_init_attr, 0, sizeof(*qp_init_attr));
+ if (qp->qp_type == IB_QPT_GSI)
+ qp_attr->qp_state = qedr_get_ibqp_state(QED_ROCE_QP_STATE_RTS);
+ else
+ qp_attr->qp_state = qedr_get_ibqp_state(params.state);
- qp_attr->qp_state = qedr_get_ibqp_state(params.state);
qp_attr->cur_qp_state = qedr_get_ibqp_state(params.state);
qp_attr->path_mtu = ib_mtu_int_to_enum(params.mtu);
qp_attr->path_mig_state = IB_MIG_MIGRATED;
--
2.17.1
next reply other threads:[~2021-10-23 16:46 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-10-23 16:45 Alok Prasad [this message]
2021-10-24 10:46 ` [v2,for-rc] RDMA/qedr: qedr crash while running rdma-tool Kamal Heib
2021-10-27 17:00 ` Jason Gunthorpe
2021-10-27 18:45 ` [EXT] " Alok Prasad
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211023164557.7921-1-palok@marvell.com \
--to=palok@marvell.com \
--cc=aelior@marvell.com \
--cc=alok.prasad7@gmail.com \
--cc=ariel.elior@marvell.com \
--cc=dledford@redhat.com \
--cc=jgg@ziepe.ca \
--cc=linux-rdma@vger.kernel.org \
--cc=michal.kalderon@marvell.com \
--cc=mkalderon@marvell.com \
--cc=smalin@marvell.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).