Linux-RDMA Archive on lore.kernel.org
 help / color / Atom feed
* Issues with i40iw
@ 2020-07-28  8:38 Anubhav Guleria
  0 siblings, 0 replies; only message in thread
From: Anubhav Guleria @ 2020-07-28  8:38 UTC (permalink / raw)
  To: linux-rdma

Hi,
Both of my servers are running with kernel 4.14.178 and have Intel
Ethernet Network Adapter X722. Also the IOMMU is disabled. I was
trying to run qperf and ran into couple of issues:

1) While running any bw test, eg. rc_bw or rc_bi_bw, I see following
messages in dmesg:
i40iw_cqp_ce_handler: opcode = 0x1 maj_err_code = 0xffff min_err_code = 0x8007
i40iw_wait_event: error cqp command 0xb completion maj = 0xffff min=0x8007

2) Following rc benchmarks fail: rc_rdma_write_bw, rc_rdma_write_lat,
rc_compare_swap_mr, rc_fetch_add_mr, ver_rc_compare_swap and
ver_rc_fetch_add. For these I get error of failed to post "benchmark
name"

Am I missing something here? Any suggestions?

Thanks,
Anubhav

^ permalink raw reply	[flat|nested] only message in thread

only message in thread, back to index

Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-07-28  8:38 Issues with i40iw Anubhav Guleria

Linux-RDMA Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-rdma/0 linux-rdma/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-rdma linux-rdma/ https://lore.kernel.org/linux-rdma \
		linux-rdma@vger.kernel.org
	public-inbox-index linux-rdma

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-rdma


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git