[PATCH V5 1/4] rpmsg: core: Add signal API support

[PATCH V5 1/4] rpmsg: core: Add signal API support

[Deepak Kumar Singh]

Some transports like Glink support the state notifications between
clients using signals similar to serial protocol signals.
Local glink client drivers can send and receive signals to glink
clients running on remote processors.

Add apis to support sending and receiving of signals by rpmsg clients.

Signed-off-by: Chris Lew <clew@codeaurora.org>
Signed-off-by: Deepak Kumar Singh <deesin@codeaurora.org>
Signed-off-by: Arun Kumar Neelakantam <aneela@codeaurora.org>
---
 drivers/rpmsg/rpmsg_core.c     | 40 ++++++++++++++++++++++++++++++++++++++++
 drivers/rpmsg/rpmsg_internal.h |  5 +++++
 include/linux/rpmsg.h          | 27 +++++++++++++++++++++++++++
 3 files changed, 72 insertions(+)

diff --git a/drivers/rpmsg/rpmsg_core.c b/drivers/rpmsg/rpmsg_core.c
index 91de940..e6eb5a1 100644
--- a/drivers/rpmsg/rpmsg_core.c
+++ b/drivers/rpmsg/rpmsg_core.c
@@ -283,6 +283,42 @@ int rpmsg_trysend_offchannel(struct rpmsg_endpoint *ept, u32 src, u32 dst,
 }
 EXPORT_SYMBOL(rpmsg_trysend_offchannel);
 
+/**
+ * rpmsg_get_signals() - get the signals for this endpoint
+ * @ept:	the rpmsg endpoint
+ *
+ * Returns signal bits on success and an appropriate error value on failure.
+ */
+int rpmsg_get_signals(struct rpmsg_endpoint *ept)
+{
+	if (WARN_ON(!ept))
+		return -EINVAL;
+	if (!ept->ops->get_signals)
+		return -ENXIO;
+
+	return ept->ops->get_signals(ept);
+}
+EXPORT_SYMBOL(rpmsg_get_signals);
+
+/**
+ * rpmsg_set_signals() - set the remote signals for this endpoint
+ * @ept:	the rpmsg endpoint
+ * @set:	set mask for signals
+ * @clear:	clear mask for signals
+ *
+ * Returns 0 on success and an appropriate error value on failure.
+ */
+int rpmsg_set_signals(struct rpmsg_endpoint *ept, u32 set, u32 clear)
+{
+	if (WARN_ON(!ept))
+		return -EINVAL;
+	if (!ept->ops->set_signals)
+		return -ENXIO;
+
+	return ept->ops->set_signals(ept, set, clear);
+}
+EXPORT_SYMBOL(rpmsg_set_signals);
+
 /*
  * match a rpmsg channel with a channel info struct.
  * this is used to make sure we're not creating rpmsg devices for channels
@@ -468,6 +504,10 @@ static int rpmsg_dev_probe(struct device *dev)
 
 		rpdev->ept = ept;
 		rpdev->src = ept->addr;
+
+		if (rpdrv->signals)
+			ept->sig_cb = rpdrv->signals;
+
 	}
 
 	err = rpdrv->probe(rpdev);
diff --git a/drivers/rpmsg/rpmsg_internal.h b/drivers/rpmsg/rpmsg_internal.h
index 3fc83cd..8958d6c 100644
--- a/drivers/rpmsg/rpmsg_internal.h
+++ b/drivers/rpmsg/rpmsg_internal.h
@@ -2,6 +2,7 @@
 /*
  * remote processor messaging bus internals
  *
+ * Copyright (c) 2018, The Linux Foundation.
  * Copyright (C) 2011 Texas Instruments, Inc.
  * Copyright (C) 2011 Google, Inc.
  *
@@ -47,6 +48,8 @@ struct rpmsg_device_ops {
  * @trysendto:		see @rpmsg_trysendto(), optional
  * @trysend_offchannel:	see @rpmsg_trysend_offchannel(), optional
  * @poll:		see @rpmsg_poll(), optional
+ * @get_signals:	see @rpmsg_get_signals(), optional
+ * @set_signals:	see @rpmsg_set_signals(), optional
  *
  * Indirection table for the operations that a rpmsg backend should implement.
  * In addition to @destroy_ept, the backend must at least implement @send and
@@ -66,6 +69,8 @@ struct rpmsg_endpoint_ops {
 			     void *data, int len);
 	__poll_t (*poll)(struct rpmsg_endpoint *ept, struct file *filp,
 			     poll_table *wait);
+	int (*get_signals)(struct rpmsg_endpoint *ept);
+	int (*set_signals)(struct rpmsg_endpoint *ept, u32 set, u32 clear);
 };
 
 int rpmsg_register_device(struct rpmsg_device *rpdev);
diff --git a/include/linux/rpmsg.h b/include/linux/rpmsg.h
index 9fe156d..c4dbb47 100644
--- a/include/linux/rpmsg.h
+++ b/include/linux/rpmsg.h
@@ -2,6 +2,7 @@
 /*
  * Remote processor messaging
  *
+ * Copyright (c) 2018 The Linux Foundation.
  * Copyright (C) 2011 Texas Instruments, Inc.
  * Copyright (C) 2011 Google, Inc.
  * All rights reserved.
@@ -60,6 +61,7 @@ struct rpmsg_device {
 };
 
 typedef int (*rpmsg_rx_cb_t)(struct rpmsg_device *, void *, int, void *, u32);
+typedef int (*rpmsg_rx_sig_t)(struct rpmsg_device *, void *, u32, u32);
 
 /**
  * struct rpmsg_endpoint - binds a local rpmsg address to its user
@@ -67,6 +69,7 @@ typedef int (*rpmsg_rx_cb_t)(struct rpmsg_device *, void *, int, void *, u32);
  * @refcount: when this drops to zero, the ept is deallocated
  * @cb: rx callback handler
  * @cb_lock: must be taken before accessing/changing @cb
+ * @sig_cb: rx serial signal handler
  * @addr: local rpmsg address
  * @priv: private data for the driver's use
  *
@@ -89,6 +92,7 @@ struct rpmsg_endpoint {
 	struct kref refcount;
 	rpmsg_rx_cb_t cb;
 	struct mutex cb_lock;
+	rpmsg_rx_sig_t sig_cb;
 	u32 addr;
 	void *priv;
 
@@ -102,6 +106,7 @@ struct rpmsg_endpoint {
  * @probe: invoked when a matching rpmsg channel (i.e. device) is found
  * @remove: invoked when the rpmsg channel is removed
  * @callback: invoked when an inbound message is received on the channel
+ * @signals: invoked when a serial signal change is received on the channel
  */
 struct rpmsg_driver {
 	struct device_driver drv;
@@ -109,6 +114,8 @@ struct rpmsg_driver {
 	int (*probe)(struct rpmsg_device *dev);
 	void (*remove)(struct rpmsg_device *dev);
 	int (*callback)(struct rpmsg_device *, void *, int, void *, u32);
+	int (*signals)(struct rpmsg_device *rpdev,
+		       void *priv, u32 old, u32 new);
 };
 
 #if IS_ENABLED(CONFIG_RPMSG)
@@ -135,6 +142,9 @@ int rpmsg_trysend_offchannel(struct rpmsg_endpoint *ept, u32 src, u32 dst,
 __poll_t rpmsg_poll(struct rpmsg_endpoint *ept, struct file *filp,
 			poll_table *wait);
 
+int rpmsg_get_signals(struct rpmsg_endpoint *ept);
+int rpmsg_set_signals(struct rpmsg_endpoint *ept, u32 set, u32 clear);
+
 #else
 
 static inline int register_rpmsg_device(struct rpmsg_device *dev)
@@ -242,6 +252,23 @@ static inline __poll_t rpmsg_poll(struct rpmsg_endpoint *ept,
 	return 0;
 }
 
+static inline int rpmsg_get_signals(struct rpmsg_endpoint *ept)
+{
+	/* This shouldn't be possible */
+	WARN_ON(1);
+
+	return -ENXIO;
+}
+
+static inline int rpmsg_set_signals(struct rpmsg_endpoint *ept,
+				    u32 set, u32 clear)
+{
+	/* This shouldn't be possible */
+	WARN_ON(1);
+
+	return -ENXIO;
+}
+
 #endif /* IS_ENABLED(CONFIG_RPMSG) */
 
 /* use a macro to avoid include chaining to get THIS_MODULE */
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

[PATCH V5 2/4] rpmsg: glink: Add support to handle signals command

[Deepak Kumar Singh]

From: Arun Kumar Neelakantam <aneela@codeaurora.org>

Remote peripherals send signal notifications over glink with commandID 15.

Add support to send and receive the signal command and convert the signals
from NATIVE to TIOCM while receiving and vice versa while sending.

Signed-off-by: Chris Lew <clew@codeaurora.org>
Signed-off-by: Deepak Kumar Singh <deesin@codeaurora.org>
Signed-off-by: Arun Kumar Neelakantam <aneela@codeaurora.org>
---
 drivers/rpmsg/qcom_glink_native.c | 125 ++++++++++++++++++++++++++++++++++++++
 1 file changed, 125 insertions(+)

diff --git a/drivers/rpmsg/qcom_glink_native.c b/drivers/rpmsg/qcom_glink_native.c
index 0e8a28c0..1bf3235 100644
--- a/drivers/rpmsg/qcom_glink_native.c
+++ b/drivers/rpmsg/qcom_glink_native.c
@@ -17,6 +17,7 @@
 #include <linux/rpmsg.h>
 #include <linux/sizes.h>
 #include <linux/slab.h>
+#include <linux/termios.h>
 #include <linux/workqueue.h>
 #include <linux/mailbox_client.h>
 
@@ -150,6 +151,8 @@ enum {
  * @intent_req_lock: Synchronises multiple intent requests
  * @intent_req_result: Result of intent request
  * @intent_req_comp: Completion for intent_req signalling
+ * @lsigs:	local side signals
+ * @rsigs:	remote side signals
  */
 struct glink_channel {
 	struct rpmsg_endpoint ept;
@@ -181,6 +184,10 @@ struct glink_channel {
 	struct mutex intent_req_lock;
 	bool intent_req_result;
 	struct completion intent_req_comp;
+
+	unsigned int lsigs;
+	unsigned int rsigs;
+
 };
 
 #define to_glink_channel(_ept) container_of(_ept, struct glink_channel, ept)
@@ -201,9 +208,15 @@ static const struct rpmsg_endpoint_ops glink_endpoint_ops;
 #define RPM_CMD_TX_DATA_CONT		12
 #define RPM_CMD_READ_NOTIF		13
 #define RPM_CMD_RX_DONE_W_REUSE		14
+#define RPM_CMD_SIGNALS			15
 
 #define GLINK_FEATURE_INTENTLESS	BIT(1)
 
+#define NATIVE_DTR_SIG			BIT(31)
+#define NATIVE_CTS_SIG			BIT(30)
+#define NATIVE_CD_SIG			BIT(29)
+#define NATIVE_RI_SIG			BIT(28)
+
 static void qcom_glink_rx_done_work(struct work_struct *work);
 
 static struct glink_channel *qcom_glink_alloc_channel(struct qcom_glink *glink,
@@ -975,6 +988,76 @@ static int qcom_glink_rx_open_ack(struct qcom_glink *glink, unsigned int lcid)
 	return 0;
 }
 
+/**
+ * qcom_glink_send_signals() - convert a signal cmd to wire format and transmit
+ * @glink:	The transport to transmit on.
+ * @channel:	The glink channel
+ * @sigs:	The signals to encode.
+ *
+ * Return: 0 on success or standard Linux error code.
+ */
+static int qcom_glink_send_signals(struct qcom_glink *glink,
+				   struct glink_channel *channel,
+				   u32 sigs)
+{
+	struct glink_msg msg;
+
+	/* convert signals from TIOCM to NATIVE */
+	sigs &= 0x0fff;
+	if (sigs & TIOCM_DTR)
+		sigs |= NATIVE_DTR_SIG;
+	if (sigs & TIOCM_RTS)
+		sigs |= NATIVE_CTS_SIG;
+	if (sigs & TIOCM_CD)
+		sigs |= NATIVE_CD_SIG;
+	if (sigs & TIOCM_RI)
+		sigs |= NATIVE_RI_SIG;
+
+	msg.cmd = cpu_to_le16(RPM_CMD_SIGNALS);
+	msg.param1 = cpu_to_le16(channel->lcid);
+	msg.param2 = cpu_to_le32(sigs);
+
+	return qcom_glink_tx(glink, &msg, sizeof(msg), NULL, 0, true);
+}
+
+static int qcom_glink_handle_signals(struct qcom_glink *glink,
+				     unsigned int rcid, unsigned int signals)
+{
+	struct glink_channel *channel;
+	unsigned long flags;
+	u32 old;
+
+	spin_lock_irqsave(&glink->idr_lock, flags);
+	channel = idr_find(&glink->rcids, rcid);
+	spin_unlock_irqrestore(&glink->idr_lock, flags);
+	if (!channel) {
+		dev_err(glink->dev, "signal for non-existing channel\n");
+		return -EINVAL;
+	}
+
+	old = channel->rsigs;
+
+	/* convert signals from NATIVE to TIOCM */
+	if (signals & NATIVE_DTR_SIG)
+		signals |= TIOCM_DSR;
+	if (signals & NATIVE_CTS_SIG)
+		signals |= TIOCM_CTS;
+	if (signals & NATIVE_CD_SIG)
+		signals |= TIOCM_CD;
+	if (signals & NATIVE_RI_SIG)
+		signals |= TIOCM_RI;
+	signals &= 0x0fff;
+
+	channel->rsigs = signals;
+
+	if (channel->ept.sig_cb) {
+		channel->ept.sig_cb(channel->ept.rpdev, channel->ept.priv,
+				    old, channel->rsigs);
+	}
+
+	return 0;
+}
+
 static irqreturn_t qcom_glink_native_intr(int irq, void *data)
 {
 	struct qcom_glink *glink = data;
@@ -1036,6 +1119,10 @@ static irqreturn_t qcom_glink_native_intr(int irq, void *data)
 			qcom_glink_handle_intent_req_ack(glink, param1, param2);
 			qcom_glink_rx_advance(glink, ALIGN(sizeof(msg), 8));
 			break;
+		case RPM_CMD_SIGNALS:
+			qcom_glink_handle_signals(glink, param1, param2);
+			qcom_glink_rx_advance(glink, ALIGN(sizeof(msg), 8));
+			break;
 		default:
 			dev_err(glink->dev, "unhandled rx cmd: %d\n", cmd);
 			ret = -EINVAL;
@@ -1332,6 +1419,42 @@ static int qcom_glink_trysend(struct rpmsg_endpoint *ept, void *data, int len)
 	return __qcom_glink_send(channel, data, len, false);
 }
 
+static int qcom_glink_get_sigs(struct rpmsg_endpoint *ept)
+{
+	struct glink_channel *channel = to_glink_channel(ept);
+
+	return channel->rsigs;
+}
+
+static int qcom_glink_set_sigs(struct rpmsg_endpoint *ept, u32 set, u32 clear)
+{
+	struct glink_channel *channel = to_glink_channel(ept);
+	struct qcom_glink *glink = channel->glink;
+	u32 sigs = channel->lsigs;
+
+	if (set & TIOCM_DTR)
+		sigs |= TIOCM_DTR;
+	if (set & TIOCM_RTS)
+		sigs |= TIOCM_RTS;
+	if (set & TIOCM_CD)
+		sigs |= TIOCM_CD;
+	if (set & TIOCM_RI)
+		sigs |= TIOCM_RI;
+
+	if (clear & TIOCM_DTR)
+		sigs &= ~TIOCM_DTR;
+	if (clear & TIOCM_RTS)
+		sigs &= ~TIOCM_RTS;
+	if (clear & TIOCM_CD)
+		sigs &= ~TIOCM_CD;
+	if (clear & TIOCM_RI)
+		sigs &= ~TIOCM_RI;
+
+	channel->lsigs = sigs;
+
+	return qcom_glink_send_signals(glink, channel, sigs);
+}
+
 /*
  * Finds the device_node for the glink child interested in this channel.
  */
@@ -1365,6 +1488,8 @@ static const struct rpmsg_endpoint_ops glink_endpoint_ops = {
 	.destroy_ept = qcom_glink_destroy_ept,
 	.send = qcom_glink_send,
 	.trysend = qcom_glink_trysend,
+	.get_signals = qcom_glink_get_sigs,
+	.set_signals = qcom_glink_set_sigs,
 };
 
 static void qcom_glink_rpdev_release(struct device *dev)
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

[PATCH V5 3/4] rpmsg: char: Add TIOCMGET/TIOCMSET ioctl support

[Deepak Kumar Singh]

From: Arun Kumar Neelakantam <aneela@codeaurora.org>

Add TICOMGET and TIOCMSET ioctl support for rpmsg char device nodes
to get/set the low level transport signals.

Signed-off-by: Deepak Kumar Singh <deesin@codeaurora.org>
Signed-off-by: Arun Kumar Neelakantam <aneela@codeaurora.org>
---
 drivers/rpmsg/rpmsg_char.c | 54 +++++++++++++++++++++++++++++++++++++++++++---
 1 file changed, 51 insertions(+), 3 deletions(-)

diff --git a/drivers/rpmsg/rpmsg_char.c b/drivers/rpmsg/rpmsg_char.c
index 4bbbacd..43ceac0 100644
--- a/drivers/rpmsg/rpmsg_char.c
+++ b/drivers/rpmsg/rpmsg_char.c
@@ -1,5 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
+ * Copyright (c) 2018, The Linux Foundation.
  * Copyright (c) 2016, Linaro Ltd.
  * Copyright (c) 2012, Michal Simek <monstr@monstr.eu>
  * Copyright (c) 2012, PetaLogix
@@ -19,6 +20,7 @@
 #include <linux/rpmsg.h>
 #include <linux/skbuff.h>
 #include <linux/slab.h>
+#include <linux/termios.h>
 #include <linux/uaccess.h>
 #include <uapi/linux/rpmsg.h>
 
@@ -269,15 +271,61 @@ static __poll_t rpmsg_eptdev_poll(struct file *filp, poll_table *wait)
 	return mask;
 }
 
+static int rpmsg_eptdev_tiocmset(struct file *fp, unsigned int cmd,
+				 int __user *arg)
+{
+	struct rpmsg_eptdev *eptdev = fp->private_data;
+	u32 set, clear, val;
+	int ret;
+
+	ret = get_user(val, arg);
+	if (ret)
+		return ret;
+	set = clear = 0;
+	switch (cmd) {
+	case TIOCMBIS:
+		set = val;
+		break;
+	case TIOCMBIC:
+		clear = val;
+		break;
+	case TIOCMSET:
+		set = val;
+		clear = ~val;
+		break;
+	}
+
+	set &= TIOCM_DTR | TIOCM_RTS | TIOCM_CD | TIOCM_RI;
+	clear &= TIOCM_DTR | TIOCM_RTS | TIOCM_CD | TIOCM_RI;
+
+	return rpmsg_set_signals(eptdev->ept, set, clear);
+}
+
 static long rpmsg_eptdev_ioctl(struct file *fp, unsigned int cmd,
 			       unsigned long arg)
 {
 	struct rpmsg_eptdev *eptdev = fp->private_data;
+	int ret;
 
-	if (cmd != RPMSG_DESTROY_EPT_IOCTL)
-		return -EINVAL;
+	switch (cmd) {
+	case TIOCMGET:
+		ret = rpmsg_get_signals(eptdev->ept);
+		if (ret >= 0)
+			ret = put_user(ret, (int __user *)arg);
+		break;
+	case TIOCMSET:
+	case TIOCMBIS:
+	case TIOCMBIC:
+		ret = rpmsg_eptdev_tiocmset(fp, cmd, (int __user *)arg);
+		break;
+	case RPMSG_DESTROY_EPT_IOCTL:
+		ret = rpmsg_eptdev_destroy(&eptdev->dev, NULL);
+		break;
+	default:
+		ret = -EINVAL;
+	}
 
-	return rpmsg_eptdev_destroy(&eptdev->dev, NULL);
+	return ret;
 }
 
 static const struct file_operations rpmsg_eptdev_fops = {
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

[PATCH V5 4/4] rpmsg: char: Add signal callback and POLLPRI support

[Deepak Kumar Singh]

From: Arun Kumar Neelakantam <aneela@codeaurora.org>

Register a callback to get the signal notifications from rpmsg and
send POLLPRI mask to indicate the signal change in POLL system call.

Signed-off-by: Deepak Kumar Singh <deesin@codeaurora.org>
Signed-off-by: Arun Kumar Neelakantam <aneela@codeaurora.org>
---
 drivers/rpmsg/rpmsg_char.c | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)

diff --git a/drivers/rpmsg/rpmsg_char.c b/drivers/rpmsg/rpmsg_char.c
index 43ceac0..50a02fb 100644
--- a/drivers/rpmsg/rpmsg_char.c
+++ b/drivers/rpmsg/rpmsg_char.c
@@ -64,6 +64,7 @@ struct rpmsg_ctrldev {
  * @queue_lock:	synchronization of @queue operations
  * @queue:	incoming message queue
  * @readq:	wait object for incoming queue
+ * @sig_pending:state of signal notification
  */
 struct rpmsg_eptdev {
 	struct device dev;
@@ -78,6 +79,8 @@ struct rpmsg_eptdev {
 	spinlock_t queue_lock;
 	struct sk_buff_head queue;
 	wait_queue_head_t readq;
+
+	bool sig_pending;
 };
 
 static int rpmsg_eptdev_destroy(struct device *dev, void *data)
@@ -122,6 +125,19 @@ static int rpmsg_ept_cb(struct rpmsg_device *rpdev, void *buf, int len,
 	return 0;
 }
 
+static int rpmsg_sigs_cb(struct rpmsg_device *rpdev, void *priv,
+			 u32 old, u32 new)
+{
+	struct rpmsg_eptdev *eptdev = priv;
+
+	eptdev->sig_pending = true;
+
+	/* wake up any blocking processes, waiting for signal notification */
+	wake_up_interruptible(&eptdev->readq);
+	return 0;
+}
+
+
 static int rpmsg_eptdev_open(struct inode *inode, struct file *filp)
 {
 	struct rpmsg_eptdev *eptdev = cdev_to_eptdev(inode->i_cdev);
@@ -138,6 +154,7 @@ static int rpmsg_eptdev_open(struct inode *inode, struct file *filp)
 		return -EINVAL;
 	}
 
+	ept->sig_cb = rpmsg_sigs_cb;
 	eptdev->ept = ept;
 	filp->private_data = eptdev;
 
@@ -156,6 +173,7 @@ static int rpmsg_eptdev_release(struct inode *inode, struct file *filp)
 		eptdev->ept = NULL;
 	}
 	mutex_unlock(&eptdev->ept_lock);
+	eptdev->sig_pending = false;
 
 	/* Discard all SKBs */
 	skb_queue_purge(&eptdev->queue);
@@ -266,6 +284,9 @@ static __poll_t rpmsg_eptdev_poll(struct file *filp, poll_table *wait)
 	if (!skb_queue_empty(&eptdev->queue))
 		mask |= EPOLLIN | EPOLLRDNORM;
 
+	if (eptdev->sig_pending)
+		mask |= POLLPRI;
+
 	mask |= rpmsg_poll(eptdev->ept, filp, wait);
 
 	return mask;
@@ -309,6 +330,7 @@ static long rpmsg_eptdev_ioctl(struct file *fp, unsigned int cmd,
 
 	switch (cmd) {
 	case TIOCMGET:
+		eptdev->sig_pending = false;
 		ret = rpmsg_get_signals(eptdev->ept);
 		if (ret >= 0)
 			ret = put_user(ret, (int __user *)arg);
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

Re: [PATCH V5 4/4] rpmsg: char: Add signal callback and POLLPRI support

[kernel test robot]

[-- Attachment #1: Type: text/plain, Size: 2000 bytes --]

Hi Deepak,

Thank you for the patch! Perhaps something to improve:

[auto build test WARNING on linus/master]
[also build test WARNING on v5.8-rc2 next-20200624]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use  as documented in
https://git-scm.com/docs/git-format-patch]

url:    https://github.com/0day-ci/linux/commits/Deepak-Kumar-Singh/rpmsg-core-Add-signal-API-support/20200625-024527
base:   https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git 3e08a95294a4fb3702bb3d35ed08028433c37fe6
config: riscv-randconfig-s031-20200624 (attached as .config)
compiler: riscv32-linux-gcc (GCC) 9.3.0
reproduce:
        # apt-get install sparse
        # sparse version: v0.6.2-dirty
        # save the attached .config to linux build tree
        make W=1 C=1 ARCH=riscv CF='-fdiagnostic-prefix -D__CHECK_ENDIAN__'

If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <lkp@intel.com>


sparse warnings: (new ones prefixed by >>)

>> drivers/rpmsg/rpmsg_char.c:288:22: sparse: sparse: invalid assignment: |=
>> drivers/rpmsg/rpmsg_char.c:288:22: sparse:    left side has type restricted __poll_t
>> drivers/rpmsg/rpmsg_char.c:288:22: sparse:    right side has type int

vim +288 drivers/rpmsg/rpmsg_char.c

   273	
   274	static __poll_t rpmsg_eptdev_poll(struct file *filp, poll_table *wait)
   275	{
   276		struct rpmsg_eptdev *eptdev = filp->private_data;
   277		__poll_t mask = 0;
   278	
   279		if (!eptdev->ept)
   280			return EPOLLERR;
   281	
   282		poll_wait(filp, &eptdev->readq, wait);
   283	
   284		if (!skb_queue_empty(&eptdev->queue))
   285			mask |= EPOLLIN | EPOLLRDNORM;
   286	
   287		if (eptdev->sig_pending)
 > 288			mask |= POLLPRI;
   289	
   290		mask |= rpmsg_poll(eptdev->ept, filp, wait);
   291	
   292		return mask;
   293	}
   294	

---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org

[-- Attachment #2: .config.gz --]
[-- Type: application/gzip, Size: 27844 bytes --]